Military Engineer Services-MES has published Tender For Welcome Maintenance And Repair/Replacement Of Misc B/R Works Officers Married Accn Of Age B/R-I Under Ge Shillong. Submission Date for this Tender is 24-05-2024. Building Work Tenders in shillong Meghalaya. Bidders can get complete Tender details and download the document.
| FileName | File Description | File Size |
| c5a8aa3d-0712-4c3d-bebc-4de6d489872f.html | Tender Notice | 0 KB |
| BOQ_731174.xls | Tender Document | 0 KB |
| tenderdocu11.pdf | Tender Document | 0 KB |
| Tendernotice_1.pdf | Tender Document | 0 KB |
| Sl. No. | Item Description |
| 1 | Taking down chowkhat with shutter (without taking off shutter from the frame) n exc 1.5Sqmeach complete all as specified and directed. |
| 2 | Taking down chowkhat with shutter (without taking off shutter from the frame) exc 1.5Sqm butn exc 4 sqm each complete all as specified and directed. |
| 3 | Taking down shutters of any descriptionn.exc 1.0 sqm each complete all as directed |
| 4 | Taking down shutters of any description exc.1.0 Sqm and n.exc 2.0 sqm each complete all as directed |
| 5 | Taking down shutters of any description exc.1.0 Sqm and n.exc 2.0 sqm eachand refixing in the same opening complete all as directed. |
| 6 | M&L for 2nd class hardwood plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints complete all as specified and directed. |
| 7 | S&F 30mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed. |
| 8 | S&F 2nd class hardwood 35mm thick plain, framed, panelled shutters (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers: supplied and fitted to chowkatscomplete all as specified and directed. |
| 9 | M&L for2nd class hardwood glazed and skeleton shutters, 35mm thick, open rebated and prepared to receive glass, gauze, etc. divided into squares, with plain, chamfered or rounded,mitred and rebated sashbars, any numbers, edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc., sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); fitted to chowkats complete all as specified and directed. |
| 10 | M&L for2nd class hardwood glazed and skeleton shutters, 30mm thick, open rebated and prepared to receive glass, gauze, etc. divided into squares, with plain, chamfered or rounded,mitred and rebated sashbars, any numbers, edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc., sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24 (b); fitted to chowkats complete all as specified and directed. |
| 11 | S&F factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and prelam PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of both side prelam PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing complete all as specified and directed. |
| 12 | S&F prelam solid PVC Door Frame of size 50mm x 47mm made out of 5mm single side prelam single piece extruded pvc profile and edgs will bepainted to match with prelam sheet , PVC sheet are to be reinforced with 19x19mm MS square tube EPDM rubber gasket weather seal shall be provided through out the frame.The profile shall be mitre cut at two corners and joint by insrting 2 nos of 150mm long backets of 15mmx15mm MS square tube inside the 19mmx19mm MS square tube and suitably screwed and fixing in opening as per specification & drawing complete all as specified and directed. |
| 13 | S&F for 75mm Butt hinges,mild steel medium weight, cold rolled and fixed complete all as specified and directed |
| 14 | S&F for 100mm Butt hinges,mild steel medium weight, cold rolled and fixed complete all as specified and directed |
| 15 | S&F 100mm stainless steel butt hinges with mild steel hinge pin complete all as specified and directed. |
| 16 | S&F 100mm long extruded aluminium alloy handles, fabricated type, anodised complete all as specified and directed. |
| 17 | S&F 150mm long extruded aluminium alloy handles, fabricated type, anodised complete all as specified and directed. |
| 18 | S&F 200mm long aluminum anodised, barrel tower bolts of extruded section and fixed complete all as specified and directed. |
| 19 | S&F 100mm long aluminum anodised, barrel tower bolts of extruded section and fixed complete all as specified and directed. |
| 20 | S&F for Brass Mortice lock,vertical type, 4 levers 100mm size complete all as specified and directed. |
| 21 | S&F for 50mm dia cupboard polished hardwood knobs fixed with screws complete all as specified and directed. |
| 22 | S&F 300mm long mild steel sliding door bolts, plate type, stove enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixedcomplete all as specified and directed. |
| 23 | S&F powder coated (minimum thickness of powder coating 50 micron) anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and directed. (Note : Any damagecaused to existing flooringwhile fixing frames shall be made good by the contractor to match with existing floorwithout any extra cost) |
| 24 | S&F powder coated (minimum thickness of powder coating 50 micron) anodised aluminium door shutters, aluminium section weighing 0.55 kg/ m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc. complete all as specified and directed. |
| 25 | S&F powder coated (minimum thickness of powder coating 50 micron) anodised aluminium window and ventilator shutters, side hung/sliding type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1 no.) complete all as specified and directed. |
| 26 | Hacking out old broken glass (any thickness, size, quality or description) from wooden frame including taking out old wooden beads complete all as specified and directed. |
| 27 | S&F 3mm thick sheet glass,ordinary quality and glazing with fixed in alumnium frame including rubber packing and aluminijum beadingn exc 0.5 Sqm in each panecomplete all as specified and directed. |
| 28 | S&F for 3mm thick Figured glass, pin head type and glazing with fixed in alumnium frame/ oil putty in squaresn exc 0.5 Sqm in each panecomplete all as specified and directed. |
| 29 | S&F 4.8mm thick sheet glass,ordinary quality and glazing with fixed in alumnium frame including rubber packing and aluminijum beadingn exc 0.5 Sqm in each panecomplete all as specified and directed. |
| 30 | S&F5.5mm thick sheet glass,ordinary quality and glazing with fixed in alumnium frame including rubber packing and aluminijum beading exc 0.5 Sqm in each panecomplete all as specified and directed. |
| 31 | S&F stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed. |
| 32 | S&F in repairs stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed. |
| 33 | S&F12mm thick prelaminated particle board, interior gradeprelaminated both side with decorative choice laminations ,fixed with screw etc complete all as specified. |
| 34 | S&F in repair Aluminium extruded section door closer hydraulially regulated, designation No 3, universal type suitable for door shutter of 851 to 1000mm width and of weightbetween 61 to 80 kg and fixed all as specified (ISI Marked) |
| 35 | Dismantling boarding, any description, fixed in any position with nails complete all as specified and directed. |
| 36 | M&L for 40mm thick 2nd class hardwood clean sawn boards or planks, width n exc. 20 cm for wooden flooring etc complete all as specified and directed. |
| 37 | S&F 18/19mm thick prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work complete all as specified and directed. |
| 38 | S & F Continuous (piano) hinges, brass, Width of flaps 30mm (when open) complete all as specified and directed. |
| 39 | S&F Magnet catches for cupboard shutter, brass body and striking plate including letting in all as specified and as directed |
| 40 | S&F Extruded brass handles, 100 mm size, fabricated type, polished all as specified and as directed |
| 41 | S&Ffloor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor, overall length of cover plate 140mm complete all as specified and directed. |
| 42 | S&F 300mm long MS Helical door spring Welded to steel /Fixed to wooden door frame including roller and roller plate etc of approved quality complete all as specified and directed. |
| 43 | Dismantling of wall/ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillets complete all as specified and directed. |
| 44 | S&F Gl frame work for seamless ceiling comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre including Hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete all as specified and directed. |
| 45 | M&L for 4mm E-board, 600x600 mm,prepainted fibre board, designer/decorative type withdesign as approved,fixed or laid/inserted in aluminiumframe work in ceiling, flat or sloping, complete all as per manufacturer instruction and as specified and directed. |
| 46 | Dismantling timber fillets, rails, posts rafter purlins, etc., under 40 Sqcm in sectional area complete all as specified and directed |
| 47 | M&L for 2nd class hard wood plain fillets, square, rectangular or triangular in section, clean sawn secured with nails or brads of sectional area exc. 13 & n. exc. 25 Sqcm complete all as specified and directed. |
| 48 | M&L for 2nd class hard wood plain fillets bullnosed, splayed, chamfered or rounded on one edge or face in section clean sawn, fixed with screws sec are exc. 6 & n. exc. 13 sqcm complete all as specified and directed |
| 49 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed. |
| 50 | M&L forvitrified ceramic tiles, light shade, 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including 15mm thick screed bed in CM 1:6 complete all as specified and as directed. |
| 51 | Ditto all as per item No.39 here-in-above but in vertical surfaces such as skirting/dados, laid over and including 10mm thick backing coat in CM 1:4 complete all as specified and as directed. |
| 52 | M&L for Joint free non skid ceramic coloured tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match, laid over and including 15mm thick screed bed in CM 1:6 complete all as specified and as directed. |
| 53 | M&L forglazed ceramic coloured tiles in vertical surface 350x 250x 7 mm/ 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match, laid over and including 10mm thick backing coat in CM 1:4 complete all as specified and as directed. |
| 54 | M&L for 18/20mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to matchwith shade of granite complete including dismantling the existing slab all as directed. |
| 55 | Labour only for chamfer , splays or arris in facework of Granite not exc 15mm wide complete all as directed. |
| 56 | M&L for Grinding and polishing of existing granite/Granular/terrazzo /Kota floor complete all as specified and directed |
| 57 | Taking down cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc. including removal of rubbish from site of work complete all as specified and directed. |
| 58 | M&L15 mm thick rendering in CM 1:4 in two layers, first 10 mm thick base layer & finishing 5 mm thick with approved water proofing compound @ 3% by the weight of cement or as per manufacturer"s instructions, finished even and smooth without using extra cementcomplete all as specified and as directed. Note : WPC shall be measured and paid separately here-in-after. |
| 59 | Supply on integral water proofing compound. |
| 60 | M&L10 mm thick rendering in CM 1:6 on fair faces of brick or concrete surface,finished even and smooth without using extra cementcomplete all as specified and as directed. |
| 61 | M&L for preparation of new plastered surfaces of wall and applying two coats of cement based paint over a coat of primercomplete all as specified and as directed. |
| 62 | M&L for preparation of new plastered surface of walls and applying two coats of acrylic distemper over a coat of alkali resistant priming paint complete all as specified and directed. |
| 63 | Complete removal of existing treatment on wall/ceiling/concrete surfaces with washing, rubbing, down and stopping of distempered and painted surfaces applying two coat of oil bound distemperusing roller over putty of 1 mm thick complete all as specified and as directed. |
| 64 | M & L for preparationof old treated surface of wall/ Ceiling etc.and applying one coat of oil bound distemper using rollercomplete all as specified and directed. |
| 65 | M&L Complete removal of existing treatment on wall/ceiling/concrete surfaces and applyingtwo or more coatsof 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistant as per IS 15489:2004, alkali & fungal resistant, dirt resistant exterior paint of any shade as ordered (Company depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqmcomplete all as specified and directed . |
| 66 | M & L for preparation of old treated surface of ceiling and applying one coat ofwhite wash completeall as specified and directed. |
| 67 | M & L for preparation of old treated steel surface of roof of any description exceeding 10cm width or girth and spray paintingone coat of synthetic enamelled paintcomplete all as specified and directed. |
| 68 | M&LFrench polishing on wooden surfaces of any description, width or girth including cleaning and preparing the surface including a coat of wood filler on new/old works with twocoats complete all as specified and as directed |
| 69 | M&L for preparation of old painted concrete surfaceswith two coats of synthetic enamel paints complete all as specified and as directed |
| 70 | M & L for preparation of old treated wood or wood based surface of any description exceeding 10cm width or girth and applying one coat of synthetic enamel paintcomplete all as specified and directed. |
| 71 | M&L for preparation of old wooden Surfaces of any description n exc 10cm width or girth when unconnected with other painting or when painted in different tintand applying one coat of synthetic enamel paintcomplete all as specified and directed. |
| 72 | M&L for preparation of new or previously untreated surfaces of wood and wood based materials of any description not otherwise described, over 10 cm width or girth and applying two coats of Synthetic enamel paint over a coat of pink primer all as specified and as directed. |
| 73 | S&F in repairs Sign board made out of 3mm thick PVC acrylic sheet of blue in colour of size 16" x 4.5" with2" size computerised letters, white, as ordered complete all as specified and directed |
| 74 | S&F 20mm dia harrison rails (curtain rails), anodised aluminium alloy with fixing brackets, stops,rollers etc.complete all as specified and directed. |
| 75 | S&Fbrackets, aluminium anodised, for 20mm dia curtain rails complete all as specified and directed. |
| 76 | S&F in repair 0.56mm thick Plain, Aluminium sheeting, Alloy 31000 H4 in ridges, hips, valley gutter, drip and straight flashing (length and girth as fixed)complete all as specified and directed. |
| 77 | Taking up or down 15mm bore steel tubing and connections, including cleaning for refixing or removal to store complete all as specified and directed. |
| 78 | Taking up or down 20mm bore steel tubing and connections, including cleaning for refixing or removal to store complete all as specified and directed. |
| 79 | S&F 15mm bore GI tubing, medium grade with all fitting and fixed complete to walls and ceilings or laid in floors complete all as specified and directed. |
| 80 | S&F 20mm bore GI tubing, medium grade with all fitting and fixed complete to walls and ceilings or laid in floors complete all as specified and directed. |
| 81 | Refixing 15mm bore old steel tubing and connections in new or old position (Walls, ceiling, floors, etc.) complete all as specified and directed. |
| 82 | Refixing 20mm bore old steel tubing and connections in new or old position (Walls, ceiling, floors, etc.) complete all as specified and directed. |
| 83 | Cutting chases, pinning in concrete block work making good to facing where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades shelves, lintels etc, and cutting chases for concealed water tubing or concealed conduit wiring etc and making good, cutting not exc 10cm girth. complete all as specified and directed. |
| 84 | S&F in repairs 15mm dia Pillar taps, cast copper alloy, with capstan heads, chromium plated, fancy type, screwed down high pressure, with or without lettered "Hot" or "Cold" with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and directed. |
| 85 | S&F in repairs 15mm dia Bib taps, fancy type, chromium plated, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed. |
| 86 | S&F in repairs 15mm dia angular stop valves, fancy type, chromium plated, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed. |
| 87 | S&F in repairs 20mm bore Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixedcomplete all as specified and directed. |
| 88 | S&F in repairs Brass CP 2-in-1 bib cock with flange complete all as specified and directed. ( Model No. Jaquar Cat Part No:- ORP-10041PM orequivalent in Marc/Hindware/Parryware) |
| 89 | S&F 125mm size chromium plated shower roses with or without swivel jointsincluding fixing to steel pipe or union complete all as specified and directed. |
| 90 | S&F32mm dia low density polyethylenepipes of pressure rating 6 kgf/sq. cm complete all as specified and directed. |
| 91 | S&Fin repairs CP wall mixer 3-in-1 system with provision for bath telephonic shower provision of over head shower complete with 115 mm long bend pipecomplete all as specified and directed. ( Model No. Jaquar Cat Part No:- CON-217KN, HSH-1737 and SHA-549D8 orequivalent in Marc/Hindware/Parryware) |
| 92 | S&F in repairs single lever basin mixer fancy type tall body with 155 mm extension body fixed spout without popup waste system with 600 mm long braided hosescomplete all as specified and directed. ( Model No. Jaquar Cat Part No:- KUP-35005BPM orequivalent in Marc/Hindware/Parryware). |
| 93 | S&F in repairs syphon complete kitfor one piece EWC flushing cistern complete all as specified and directed. |
| 94 | S&F in repairs vitreous china single piece EWC including seat cover, closed patternof size 360x655x765mm complete all as specified and directed. ( Model No. Jaquar Cat Part No :-LYS-WHT-38851P180UFSM or equivalent inCera, Parryware or Hindware) |
| 95 | S&F in repairs Vitreous China EWC with P or S Trap, white,including seat cover, closed pattern with flat bottom and cover, MS CP hinging device, PVC flush bend pipe, PVC Flushing cistern 10 Ltr capacity, low level valve less , syphonic action type, White with inlet ball valve, float and handle, 32 mm dia PVC flush pipe, a pair of cast iron brackets duly painted / erecting stand, cutting and pinning in ends, making good disturbed surfaces in mement mortar 1:3 and including taking down unserviceable flushing cistern and connected Items complete as specified and as directed. |
| 96 | S&F Vitreous China Wash Hand Basin of size 550 x 400 mm, white with pedestal including cutting or pinning in ends of brackets or erecting stand, waste coupling and 32 mm dia waste pipe complete all as specified . |
| 97 | S&F vitreous china squatting pan, ‘Orissa’ pattern, size 580 x 440 mm white, with integral foot rests including provision oflime concrete bedding complete all as specified and directed. |
| 98 | S&F in repairs 10 ltrs capacity PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets and provision of 32mm PVC flush pipe of required length and making connections complete all as specified and directed. |
| 99 | S&F in repairs plastic water closet seat, white, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device complete all as specified and directed. |
| 100 | S&FHealth faucet (ABS Body) mild steel chromium plated suitable for 15mm dia pipe with 1.25metre long flexible tube and ABS wall hook including making connections and fixed in position complete all as specified and directed. |
| 101 | S&F in repairs chromium plated soap dish holder complete all as specified and directed. |
| 102 | S&F in repairs Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and directed. |
| 103 | S&Fin repairs corner glass shelf assemblywith chromium plated bracket guard and railing complete all as specified and directed. |
| 104 | S&F in repairs Towel Rail 600mm long of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats. (Minimum weight 190gms) complete all as specified and directed. |
| 105 | S & F Stainless steel kitchen plate rack of size 31"" X 30 "" X 10"" made out of stainless steel sheet of 1.00 mm with all accessories including taking down old unservicable one etc complete all as specified and directed. |
| 106 | S&F in repairs sinks made of stainless steel, 1mm thick, kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm &bowl size 410mm x 330mm x 160mm complete all as specified and directed. |
| 107 | S&F in repairs grating doom 100mm dia of PTMT (Minimum weight 25gms) complete all as specified and directed. |
| 108 | S& for PVC connections 15mm size with PTMT nuts of length 450mm complete all as specified and directed. |
| 109 | S&F in repairs 600mmx450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified and directed. |
| 110 | S&F in repairs 20mm dia Ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed complete all as specified and directed. |
| 111 | S&F 500 ltrs capacityrotational moulded HDPE water storage tank ,double layer ,ISI marked (cylindrical vertical type with closed top) placing in positionand fixedincluding dismantling old unserviceable water tank complete all as specified and directed. |
| 112 | S&F 1000 ltrs capacityrotational moulded HDPE water storage tank ,double layer ,ISI marked (cylindrical vertical type with closed top) placing in positionand fixedincluding dismantling old unserviceable water tank complete all as specified and directed. |
| 113 | Cleaning and removing all scale and dirt etc. from PVC/RCC/MS over head tanksusing wire brush, bleaching powder or lime etc. of required quantity and washing with clean water inside tank and from mouths of circulating pipes. etc after disconnecting existing tanks, setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position of capacity exc 250 nexc 500 ltrs including writing "TC on -DD/MM/YY" with white synthetic enamel paint with 5cm font in capital letters complete all as specified and directed.. |
| 114 | Cleaning and removing all scale and dirt etc. from PVC/RCC/MS over head tanksusing wire brush, bleaching powder or lime etc. of required quantity and washing with clean water inside tank and from mouths of circulating pipes. etc after disconnecting existing tanks, setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position of capacity exc 500 nexc 1000 ltrs including writing "TC on -DD/MM/YY" with white synthetic enamel paint with 5cm font in capital letters complete all as specified and directed.. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
