Military Engineer Services-MES has published Tender For Certain Repair And Periodical Services To Otm Accommodation At Alg And S And S Units Under. Submission Date for this Tender is 31-05-2024. Building Work Tenders in ferozepur Punjab. Bidders can get complete Tender details and download the document.
| Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
| 1 | 10-May-2024 | Tender Document | Other | 31-05-2024 |
| FileName | File Description | File Size |
| 622ebf01-dff4-4413-b002-f068b5e5f931.html | Tender Notice | 0 KB |
| BOQ_731122.xls | Tender Document | 0 KB |
| Tendernotice_1.pdf | Tender Document | 0 KB |
| Sl. No. | Item Description |
| 1 | Material and labour for preparation of old plastered surfaces of walls and applying one coat of white wash on walls including cornices, pillasters etc complete all as specified and as directed by Engineer-in-Charge. |
| 2 | All as per item No.01 here in beforebut one coat of colour wash complete all as specified and as directed by Engineer-in-Charge. |
| 3 | All as per item No.01 here in beforebut one coat ofoil bound distemper complete all as specified and as directed by Engineer-in-Charge. |
| 4 | All as per item No.01 here in beforebut one coat ofcement base paint complete all as specified and as directed by Engineer-in-Charge. |
| 5 | Preparation of old decorated surfaces of ceiling including cornices plasters etc and applying one coat ofwhite lime wash complete all as specified and as directed by Engineer-in-Charge. |
| 6 | Material and labour for preparation of old plastered surfaces of walls and applying Onecoats of exterior emulsion paint complete all as specified and as directed by Engineer-in-Charge. |
| 7 | Preparation of old wooden surfaces over10cm width or girth and applying one coat of synthetic enemel paint complete all as specified and as directed by Engineer-in-Charge. |
| 8 | Preparation of old steel suraces and applying one coat of synthetic enemel paint over 10cm width or girth complete all as specified and as directed by Engineer-in-Charge. |
| 9 | Material and labour for preparation of wall surface with 2 mm thickwall care putty for patch work of interior/exterior on wall surfaces finished smooth and even completeall as specified and directed by Engineer in Charge |
| 10 | Demolition of un-reinforced cement concrete in ground floor and paving not exceeding 15 cm thick (below or above ground level) complete all as specified and as directed by Engineer-in-Charge. |
| 11 | Material and labour for cement concrete in floor, path, hare standing, filling and mass concrete complete all as specified and as directed by Engineer-in-Charge. |
| 12 | Material and labour Cement concrete (1:2:4) type B-1 using 20mm graded stone aggregate as in floor topping, 40mm thick, surfaces finished even and smooth without using extra cement complete all as specified and as directed by Engineer-in-Charge. |
| 13 | Material and labour for Brick work in cement mortar 1:6 using sub class ‘B’ old size bricks, straight or curved on plan exceeding 6 metre mean radius including demolition of brick work built in cement mortar of any specification and in any position complete all as specified and as directed by Engineer-in-Charge. |
| 14 | Demolition of brick work built in cement mortar of any specification and in any position and using old bricks in cement mortar 1:6 using sub class ‘B’ old size bricks, straight or curved on plan exceeding 6 metre mean radius retrieved from dismentling including cleaning and removal of mortar from old bricks complete all as specified and as directed by Engineer-in-Charge. |
| 15 | Material and labour for Rendering/plastering, 10mm thick in cement mortar (1:6) on any face of brick walls or concrete surfaces, finished even and smooth (without using extra cement) includingPreparation of new plastered surfaces wall and applying two coats of Oil bound distember over a coat of primer complete all as specified and as directed by Engineer-in-Charge. |
| 16 | Material and labour for 15mm thick rendering in cement mortar (1:4) on any face of brick walls or concrete surfaces, finished even and fair (without using extra cement) including Preparation of new plastered surfaces and applying two coats of cement base paint over a coat of chalk white primer complete all as specified and as directed by Engineer-in-Charge. |
| 17 | Material and labour Cement concrete (1:5:10) type E-2 using 40mm graded stone aggregate in foundations, filling and mass concrete, as in filling under sunken floor portion includingDemolation of unreinforcement cement concrete in any description and in any position complete all as specified and as directed by Engineer-in-Charge. |
| 18 | Material and labour for Rendering/plastering, 10 mm thick in cement mortar (1:3) on concrete surfaces of sunken floor with WPC compound and applying bitumen blown any grade applied two coats to concrete surface / rendering at the rate of 1.5 kg per sqm per coat and treating the sunken floor complete all as specified and as directed by Engineer-in-Charge. |
| 19 | Material and labour for APP modified polymeric membrane with mineral finish on top min 3 mm thick & weighing n. less than 3.5kgs/sqm with mineral reinforced with polyster non-woven fabric(wt n.less than 150gm/m2) laid over cold bituminous primer by torch application method with min overlap of 75mm on longitudinal direction & 100m in the transverse direction complete all as specified and as directed by Engineer-in-Charge. |
| 20 | Supply only integral water proofing compound (ISI Marked)complete all as specified and as directed by Engineer-in-Charge. |
| 21 | Material and labourfor non skid coloured ceramic tiles of7 to 8 mm thick, area of each tile exceeding 0.06 sq m but not exceeding 0.11Sq min floors set and jointed in neat cement slurry and pointed in white cementmixed with colour pigment to match over a screed layer of 15 mm thick in CM 1:6 including dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles and rubbish off the premises complete all as specified and as directed by Engineer-in-Charge. |
| 22 | Material and labourfor non skid coloured ceramic tiles of7 to 8 mm thick, area of each tile exceeding 0.11 sq m but not exceeding 0.18Sq min floors set and jointed in neat cement slurry and pointed in white cementmixed with colour pigment to match over a screed layer of 15 mm thick in CM 1:6 including dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles and rubbish off the premises complete all as specified and as directed by Engineer-in-Charge. |
| 23 | Material and labourfor non skid coloured ceramic tiles of7 to 8 mm thick, area of each tile exceeding 0.11 sq m but not exceeding 0.18Sq m as in skerting/dadoset and jointed in neat cement slurry and pointed in white cementmixed with colour pigment to match andbacking with 10 mm thick in CM 1:4 including dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles and rubbish off the premises complete all as specified and as directed by Engineer-in-Charge. |
| 24 | Supply and fixingof Glazed coloured and cereamic tiles in vertical surfaces 300X200X7mm/ 300x450x7 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match over backing coat 10mm thick in cement mortar 1:4 for laying skirting dados and vertical surfaces including dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles and rubbish off the premises complete all as specified and as directed by Engineer-in-Charge. |
| 25 | Supply and fixinglight shade Vitrified ceramic tiles 9-10mm thick (Square/rectangular) polished area of each tiles n.exc 0.36 Sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured (Light Shade)cement to match over 20 mm thick screed bed or bedding layer of cement mortar(1:6) for laying floor finishes including dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles and rubbish off the premises complete all as specified and as directed by Engineer-in-Charge. |
| 26 | Material and labour forlight shade Vitrified tile 9-10 mm thick polished, area of tile n exc.0.36 sqm as in Skirting set and jointed in cement slurry over and including 10mm thick backing coat in cement mortar (1:4) and pointed in white cement with pigment to match the colour of tiles including dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles and rubbish off the premises complete all as specified and as directed by Engineer-in-Charge. |
| 27 | Taking down wooden chowkhats or frames with shutters (without taking off shutters from the frames) of size not exceeding 1.50 Sqm each including cutting holes in brick walls of appropriate size for insertion of cement concrete blocks for hold fasts complete all as specified and as directed by Engineer-in-Charge. |
| 28 | All as per item No 27herein before but size exceeding 1.5 Sqm and not exceeding 4 Sqm each complete all as specified and as directed by Engineer-in-Charge. |
| 29 | Taking down shutters of any description and refixing in the same opening exc 1 sqm and not exc 2 sqm each complete all as specified and as directed by Engineer-in-Charge.. |
| 30 | Taking down Shutters of any description exc 1 sq. m and n exc 2 sq. m each complete all as specified and as directed by Engineer-in-Charge. |
| 31 | Supply and fixingPressed steel frames made of 1.25mm thick MS sheet of profile 105x60mm for door and window frames with one rebate including lock strike plate, shock absorber, 20mm dia 60mm long MS conduit for housing of a drop bolt, treating of internal surfaces of chowkhats with coal tar or black paint including hinges, hold fasts/lugs etc complete all as specified and as directed by Engineer-in-Charge. |
| 32 | All as per item 31 above here-in-before but size 125x60mm with double rebate complete all as specified and as directed by Engineer-in-Charge. |
| 33 | Material and labour Cement concrete (1:3:6), type C-1 using 20mm graded stone aggregate as in filling of steel chowkhats,bed blocks, hold fasts, coping etcincluding necessary form work complete all as specified and as directed by Engineer-in-Charge. |
| 34 | Supply and fixing Solid PVC door frame of size 50 mm x 47 mm made of 5 mm plain colour PVC sheet reinforced with mild steel square tube complete all as specified in clause 8B.3.1 and shown on page 150 of MES Schedule Part-II (2010) complete all as specified and as directed by Engineer-in-Charge. |
| 35 | Supply and fixing Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of MS tubes for top & bottom rails, MS frame covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; paneling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading and jointed together with solvent cement, supply and fixing in the frame at site as per clause 8 B.2.1 of MES schedule Part-II (2004) complete all as specified and as directed by Engineer-in-Charge. |
| 36 | Supply and fixing PTMT tower bolts, 150 mm long and fixed with steel screws complete all as specified and as directed by Engineer-in-Charge. |
| 37 | Supply and fixing PTMT butt hinge, 100mm long,fixed with steel screws with brass/bronze hinge pin complete all as specified and as directed by Engineer-in-Charge. |
| 38 | Supply and fixing PTMT handle 125mm long fixed with steel screws complete all as specified and as directed by Engineer-in-Charge. |
| 39 | Supply and fixing30mm thick second class hard wood plain framed panelled shutters(any number of panels ), with panels of timber flat on both sides (feather edge), or of veneered particle board medium density wood wood particle board with commericial face veneers and fitted to chowkats complete all as specified and as directed by Engineer-in-Charge. |
| 40 | Supply and fixing30mm thick second class hard wood glazed and skelton shutters,open rebated and prepared to receive glass gauze,etc (without sash bars),edges of framingplain chamfered or rounded fitted with cut and mitred beads for securing glass etc sizes of members of shutters as specified in SSR part-I section 8 clause 8.24(a) fitted to chowkat complete all as specified and as directed by Engineer-in-Charge. |
| 41 | Supply and fixingFactory made double rebate box type side hung steel window with pintal hinges & 2 Nos 150 mm mild steel tower bolts to each shutter, steel handle, with & Without glazing bars, one side wiremesh shutter without glazing bar & other side glass shutter with glazing bar including 6mm mild steel guard bars dovetailed or welded and with one shop coat of zinc chromate primer complete all as specified and shown on Drawing No CEJZ/TD-06/07 & CEJZ/TD-07/07 complete all as specified and as directed by Engineer-in-Charge..Note : Wiremesh and glass will be measured seperately |
| 42 | Supply and fixingFactory made box type steel ventilator with glazing bars dovetailed or welded,grills/guard bars shouldered with steel ventilator frames and with one shop coat of zinc chromate primer complete all as specified and as directed by Engineer-in-Charge. |
| 43 | Material and labour Preparation of new steel surfaces of any description, over 10cm width or girth and applying two coats of synthetic enamel paint complete all as specified and as directed by Engineer-in-Charge. |
| 44 | Material and labour Preparation of new wooden or wood based surfaces of any description, over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed by Engineer-in-Charge. |
| 45 | Supply and fixing18/19 mm thick prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination and other side balancing white lamination fixed with screws to timber frame work, including dismantling of boarding, any description,, fixed in any position complete all as specified and as directed by Engineer-in-Charge. |
| 46 | Supply and fixing150mm long aluminium, anodisedbarrel tower bolts of extruded section, complete all as specified and as directed by Engineer-in-Charge. |
| 47 | Supply and fixing100mm Extruded aluminium alloy handlecomplete all as specified and as directed by Engineer-in-Charge. |
| 48 | Supply and fixing Aluminium alloy, anodised, sliding door bolt 250mm length,with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and as directed by Engineer-in-Charge. |
| 49 | Supply and fixing 140 mm Floor door stopper of aluminium alloy body and tongue, anodized with hard drawn steel spring complete all as specified and as directed by Engineer-in-Charge. |
| 50 | Supply and fixing3mm thick, plainsheet glass ordinary quality and glazing,with oil putty or with wooden beads(supplied alongwith shutters), in squares n.exc 0.50 Sqm complete all as specified and as directed by Engineer-in-Charge. |
| 51 | Supply and fixingGalvanised mild steel wire cloth0.56 mm nominal dia of wire and average width of aperture not more than 1.18mm and fixed with tinned tacks or galvanized wire staples complete all as specified and as directed by Engineer-in-Charge. |
| 52 | Supply and fixingin repair to 3mm thick, plainsheet glass ordinary quality and glazing,with oil putty or with wooden beads, in squares n.exc 0.50 Sqm incl. including hacking out old broken glass and putty/beading complete all as specified and as directed by Engineer-in-Charge. |
| 53 | Supply and fixingin repair Galvanised mild steel wire cloth0.56mm nominal dia of wire and average width of aperture not more than 1.18mm and fixed with tinned tacks or galvanized wire staplescomplete all as specified and as directed by Engineer-in-Charge. |
| 54 | Demolition of Stone slabs and tiles laid bedded pointed in mortar of any description or thickness in floors, aprons etc complete all as specified and as directed by Engineer-in-Charge. |
| 55 | Material and labour Machine pressed precast conctete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35Grade with grey cement and no pigment used, excluding laying ofsand cushioning complete all as specified and as directed by Engineer-in-Charge..Note :- Sand will be measured and paid seperately |
| 56 | Material and labour sand filling under floors or in foundations including watering and consolidation complete all as specified and as directed by Engineer-in-Charge. |
| 57 | Material and labour Chequered cement concrete coloured tiles 30 cm x 30 cm x 25 mm thick using grey cement and no pigment set over & including 20 mm thick screed bed or bedding layer in cement mortar (1:6) with neat cement and pointed in grey cement mixed with pigment to match the shade of tiles complete all as specified and as directed by Engineer-in-Charge. |
| 58 | Material and labourfor non skid coloured ceramic endura tiles heavy duty for outdoor 7 to 8 mm thick, area of each tile exceeding 0.06 sq m but not exceeding 0.11Sq min floors set and jointed in neat cement slurry and pointed in white or coloured cementto match over include 15 mm thick cement screed in CM 1:6 including dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles and rubbish off the premises complete all as specified and as directed by Engineer-in-Charge. |
| 59 | Material and labourGranite (of any type) tiles 16- 20mm thick machine cut, bedded andjointed with grey cement slurryand pointed with white cementwith admixture of pigment to match the shade of granite stone including grinding and polishing, moulding, rounding, chamfered and hole for gas pipes with 15mm thick screed in cement mortar (1:4) complete all as specified and as directed by Engineer-in-Charge. |
| 60 | Material and labour for 18-20mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, win dow-cills, cooking plat forms and like in cement mortar (1:4) including point ing in white cement (1:2) us ing marble dust with admix ture of pigment to match with shade of granite complete all as specified and as directed by Engineer-in-Charge. |
| 61 | Material and labour for Rendering/plastering, 10mm thick in cement mortar (1:6) on any face of brick walls or concrete surfaces, finished even and smooth (without using extra cement) including taking down cement plasterfrom brick walls of any description, racking out joints, hacking for key, scrubbing down with water & Preparation of new plastered surfaces wall and applying two coats of Oil bound distember over a coat of primer complete all as specified and as directed by Engineer-in-Charge. |
| 62 | Material and labour for 15mm thick rendering in cement mortar (1:4) on any face of brick walls or concrete surfaces, finished even and fair (without using extra cement) including taking down cement plasterfrom brick walls of any description, racking out joints, hacking for key, scrubbing down with water & Preparation of new plastered surfaces and applying two coats of cement base paint over a coat of chalk white primer complete all as specified and as directed by Engineer-in-Charge. |
| 63 | Material and labour Rendering 5mm thick in cement mortar (1:3) on any face of brick walls or conrete surfaces, surfaces finished even and smooth without using extra cement, inceiling, soffits of chajja or similar location etc including taking down cement plasterfrom brick walls of any description, racking out joints, hacking for key, scrubbing down with water & Preparation of new plastered surfaces and applying two coats of white wash on ceiling surface complete all as specified and as directed by Engineer-in-Charge. |
| 64 | Supply and fixinggalvanised steel water tubes 15 mm bore medium grade, with all fittings and fixed complete to walls and ceiling or laid in floors including taking down corroded GI pipe complete all as specified and as directed by Engineer-in-Charge. |
| 65 | Supply and fixinggalvanised steel water tubes 20 mm bore medium grade, with all fittings and fixed complete to walls and ceiling or laid in floors including taking down corroded GI pipe complete all as specified and as directed by Engineer-in-Charge. |
| 66 | Taking up or down 15 mm existing steel tubing and connections and re fixing old steel tubing and connections in new or old position complete to walls and ceiling or laid in floors complete including cleaning the steel tubingcomplete all as specified and as directed by Engineer-in-Charge. |
| 67 | All as per item No.66 here in beforebut 20mm dia complete all as specified and as directed by Engineer-in-Charge. |
| 68 | Supply and fixingin repair PVC low level flushing cistern (white) of 10 liters capacity with inlet ball float valve, PVC flush pipe and necessary fixing arrangements and connecting to water pipe and WC etc and fixedcomplete all as specified and as directed by Engineer-in-Charge. |
| 69 | Supply and fixingin repair 15mm bore stop valves of cast copper alloy (concealed type), screwed down, high pressure with crutch or butter fly handle, fancy type, chromium plated, with long shank and cup complete all as specified and as directed by Engineer-in-Charge. |
| 70 | Supply and fixingin repair 15mm bore stop valves/ angle valve CP of cast copper alloy, screwed down, high pressure with crutch or butter fly handle, fancy type, chromium plated, with long shank and cup complete all as specified and as directed by Engineer-in-Charge. |
| 71 | Supply and fixingin repair 15mm bore PTMT ball valve high pressure with polythene float and fly nut complete, screwed for iron pipe or brass ferrule and fixed, complete all as specified and as directed by Engineer-in-Charge. |
| 72 | Supply and fixing in repair125mm dia CP brass shower rose with or without swivel joints, any size including fixing to steel pipe or union complete all as specified and as directed by Engineer-in-Charge. |
| 73 | Supply and fixingPVC connection both end brass union and length 450 mm long for 15 mm bore pipe complete all as specified and as directed by Engineer-in-Charge. |
| 74 | Supply and fixing in repair CP Bib tap, 15mm bore, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and as directed by Engineer-in-Charge. |
| 75 | Supply and fixingin repair 15mm bore pillar tap, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered ‘Hot’ or ‘Cold’ with long screwed shanks and fly-nuts, screwed for iron pipe, complete all as specified and as directed by Engineer-in-Charge. |
| 76 | Supply and fixingin repair Rotational moulded Polyethylene water storage tank of 500 litres capacity (cylindrical vertical with closed top) hoisted and fixed in position including 20mm PVC float valve high pressure with polythene float valve & taking down old PVC water tank complete all as specified and as directed by Engineer-in-Charge. |
| 77 | Supply and fixingin repair Rotational moulded Polyethylene water storage tank of 1000 litres capacity (cylindrical vertical with closed top) hoisted and fixed in position including 20mm PVC float valve high pressure with polythene float valve & taking down old PVC water tank complete all as specified and as directed by Engineer-in-Charge. |
| 78 | Supply and fixingPVC body toilet cabinet (box type) 600x450mmx125mm size with mirrorof selected quality glass having 5.5mm thickness and fixed to walls with screws and wooden/rawl plugs complete all as specified and as directed by Engineer-in-Charge. |
| 79 | Cleaning & Removing all scale and dirt etc from 500 ltr capacity tanks and from mouths of circulating pipes etc complete all as specified and as directed by Engineer-in-Charge. |
| 80 | Supply and fixing600mmX450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board of commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers with alround aluminium beadingas fixed in repairs complete all as specified and as directed by Engineer-in-Charge. |
| 81 | Supply and fixingin repair Aluminium body hydraulically regulated Door closeruniversal type, suitable for door shutters of 851 to 1000 mm in width & of weight between 61 to 80kg complete all as specified and as directed by Engineer-in-Charge. |
| 82 | Supply and fixing15mm bore dia Bib tap standard of PTMT any colour high pressure screwedforiron pipe and fixed.(Minimum weight 15mm-90gms/20mm- 125gms) as fixed in repairs complete all as specified and as directed by Engineer-in-Charge. |
| 83 | Supply and fixing15mm bore dia Stop valve of PTMT (minimum weight 15mm-90Gm-20mm-92 gm) any colour high pressure screwed for iron pipe as fixed in repairs complete all as specified and as directed by Engineer-in-Charge. |
| 84 | Supply and fixingVitreous china white squatting pan orrissa pattern of size 580mm x 440 mm with integral foot rests including necessary lime concrete and 100 mm bore cast iron ‘P’ trap with 550 to 600 mm long neck for connecting WC to branch piece with cement joints, fixed as in repair,complete all as specified and as directed by Engineer-in-Charge. |
| 85 | Supply and fixingin repair Vitreous china wash down water closet pan (pedestal pattern)white/coloured cascade type 640X360X690 (monolithic flush cistern type) Make: Jaquare Model NO:SLS WHT-6853S/CERA Cat No: s1013132 s single picece wc with PP seat cover ,Hinges fixing accessories set including flush cistern with S-Trap of size 220mm complete all as specified and as directed by Engineer-in-Charge. |
| 86 | Supply and fixingSyphon Kit including EPDM rubber washer for Monolithic orCascade type of flush cisternfor vitreous china10 ltr capacity as fixedin repairs complete all as specified and as directed by Engineer-in-Charge. |
| 87 | Supply and fixingVitreous china white wash down water closet including PVC sheet cover, Jet and connection to drain or out going pipe and to flushing pipe anti-syphonage pipe etc, fixed as in repair, complete all as specified and as directed by Engineer-in-Charge. |
| 88 | Supply and fixingWash hand basin, flat back 550x400mm vitreous china (white) including PTMT waste fittings, 32mm bore size, waste pipe, PVC, 32mm bore, angle iron/cast iron brackets of required size as directed & making good disturbed surfaces to match with the existing as in repair complete all as specified and as directed by Engineer-in-Charge. |
| 89 | Supply and fixing table top Wash hand basin vitreous china (white) wall mounted with box type wash basin vanity including CP waste fittings, 32mm bore size, waste pipe, PVC, 32mm bore,& making good disturbed surfaces to match with the existing as in repair complete all as specified and as directed by Engineer-in-Charge. |
| 90 | Supply and fixingin repair of CP mixer 15mm bore mixing and hot and cold water scrwed down for iron pipe and fixed. and waste system with 450mm long braided hoses complete all as specified and as directed by Engineer-in-Charge. |
| 91 | Supply and fixingin repair Health faucet(Jaguar model No: ALD-CHR-587/ Parryware T9804A1 Agate with Hose & Hook/ or equivalent) (ABS Body) with 8mm dia1.00 m long easy flexible tube chormium coated finishand wall hook complete all as specified and as directed by Engineer-in-Charge. |
| 92 | Supply and fixingCP tubular towel rail, 20mm dia, D type, 60cm long between flanges as fixed in repairs complete all as specified and as directed by Engineer-in-Charge. |
| 93 | Supply and fixingCP Soapdish Oval /square type as fixed in repairs andcomplete all as specified and as directed by Engineer-in-Charge. |
| 94 | Supply and fixingPVC waste pipe, 32mm bore suitable to waste coupling pipe attach with rubber ring joints fixed to waste coupling of sinks/WHBs. as fixed in repairs complete all as specified and as directed by Engineer-in-Charge. |
| 95 | Supply and fixingMild steel curtain rod chromium plated with fixing side brackets, end cups and fixed withPVC rawl plugs & steel screws as inrepairs complete all as specified and as directed by Engineer-in-Charge. |
| 96 | Supply and fixing110mm dia PVC (SWR) pipes single socketed in any length with rubber ring jointsfixed to walls including taking down eaves gutters and rain water pipes (any size or pattern),including all fittings heads shoes bends swan-necks etc complete all as specified and as directed by Engineer-in-Charge. |
| 97 | Supply and fixing75mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints laid in trenches including taking down eaves gutters and rain water pipes (any size or pattern),including all fittings heads shoes bends swan-necks etc complete all as specified and as directed by Engineer-in-Charge. |
| 98 | Supply and fixing75mm dia PVC (SWR)with access door bends any radius complete all as specified and as directed by Engineer-in-Charge. |
| 99 | Supply and fixing110 mm dia PVC (SWR)with access door bends any radius complete all as specified and as directed by Engineer-in-Charge. |
| 100 | Dismantling of wall and ceiling boards (Fibre, pulp, insulation, etc.) or insulation boards/slabs/blankets, any thickness, including cover fillets complete all as specified and as directed by Engineer-in-Charge. |
| 101 | Supply and fixingin repair to Hollow PVC wall lining consisting of 5mm thick single side prelam PVC sheet instead of plain colour sheet inclusive of solvent cement and fixing on PVC frame as per specified in MES schedule part-I & II complete all as specified and as directed by Engineer-in-Charge. |
| 102 | Supply and fixingin rep of Gypsum Board 8 mm thick in ceiling fixed with screw 60x60cm placed in ceiling (Angle 25mm X 25mm , Main tee 38mmX23mm ,Sub tee 23mmX23mm) incl aluminium anodised/powder coated snap grid frame 605X605 mm for false ceiling incl hanging arrangement hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete all as specified and as directed by Engineer-in-Charge. |
| 103 | Material and labour for providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required including Demolition of un-reinforced cement concrete in ground floor and paving not exceeding 15 cm thick complete all as specified and as directed by Engineer-in-Charge. |
| 104 | Material and labour for double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed in repairs complete all as specified and as directed by Engineer-in-Charge. |
| 105 | Taking down double action floor spring hydraulically regulated, open internal parts and with oiling and repair to internal action spring and refixing same location including all necessary fittings and make functional complete all as specified and as directed by Engineer-in-Charge. |
| 106 | Supply and fixingfor anodised aluminium frame for doors, windows, ventilators and patations with one or more rebates including joining cleat for fixing etc. complete all as specified and as directed by Engineer-in-Charge. |
| 107 | Supply and fixingfor anodised aluminium door shutters, aluminium section weighing 0.55 kg/ m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc. complete all as specified and as directed by Engineer-in-Charge. |
| 108 | Supply and fixingfor anodised aluminium window and ventilator shutters, fixed type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc. complete all as specified and as directed by Engineer-in-Charge. |
| 109 | Material and labour for cleaning of existing sewage line exc 100 mm and n. exc 200 mminternal dia at any depth incl manholes by removing the manholes covers of any type/ size and cleaning by means of hydraulic jet pressure mechine/ manually bamboo rodding as required at site from manholes and well flushing with water after cleaning incl getting out sledge if any and liqued materials from connecting manholes dipositedin sewer line and removing the solids and sludge to any distance and reinstating the manhole covers in its original position as diretced by Engr - in - Charge Note:- (i) Excavation and earth work included in unit rate (ii) Cleaning of existing sewage pipe line / manholes by suitable suction pump loaded vehicle / trailers / manually by bamboo rodding available in the market and depose effluent out side the defence land. the shall be included in the quoted rate. |
| 110 | Material and labour for complete cleaning and removing blockage from WC to first manholes, nahani/floor traps to gully trap and from gully trap to first manholes by well flushing with adequate water, including opening andrefixing gully trap covers excess doors of junctions/ bends with bolts are cement joints asper site conditions from any dia and type of pipes and fittings complete all as directed (Cleaning from WC to Ist MH, NT to GT and GT to MH shall be treated as separate units complete all as specified and as directed by Engineer-in-Charge.. Note:- For manual Cleaning Minimum 06 Nos ofLabours with one site supervisor for collection and disposal of complaints to JE till contract period shall be including the quoted rates. |
| 111 | Removing the manhole covers (CI or RCC) any type or shape and desludging / dewatering of septic tank,Manhole and soakage well of upto 1.5mtr depthby mechanical pumping/ manually by plugging inlet as required, making it fully functional to the entire satisfaction of Engr -in- charge including carrying the effluent and reinstating the manholes cover to its original position complete all as specified and as directed by Engineer-in-Charge. Note:- Cleaning of septic tank/ soakage wells/ manholes by suitable suction pump loaded vehicle / trailers available in the market and dispose effluent out side the defence land that shall be including the quoted rates. Note:- For manual Cleaning Minimum 06 Nos ofLabours with one site supervisor for collection and disposal of complaints to JE till contract period shall be including the quoted rates. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
