Military Engineer Services-MES has published Tender For Certain Repair And Periodical Services To Otm Accommodation At Kasubegu Under. Submission Date for this Tender is 31-05-2024. Building Work Tenders in ferozepur Punjab. Bidders can get complete Tender details and download the document.
| FileName | File Description | File Size |
| db54ddaf-f2f6-4327-b3f2-695969ebd87c.html | Tender Notice | 0 KB |
| BOQ_731126.xls | Tender Document | 0 KB |
| Tender03.pdf | Tender Document | 0 KB |
| Tendernotice_1.pdf | Tender Document | 0 KB |
| Sl. No. | Item Description |
| 1 | Material and labourflush pointing to brick laid flat or brick tiles in roofs and pavingin cement mortar (1:3)including racking out joints/ pointing to brick work or brick tilesin roofs etc. work built in cement mortar complete all as specified and as directed by Engineer-in-Charge. |
| 2 | Material and labour Glazed ceramic coloured tiles in vertical surfaces 300x450x7mmthickset and jointed in neat cement slurry and pointed in white or coloured cement to match over including 10 mm thick rendering in cement mortar (1:4)on fair faces of brick work or concrete surfaces including dismentling of wall tiling with cement mortar bedding (but not backing) removing seviceable tiles to store and rubbish off the premisescomplete all as specified and as directed by Engineer-in-Charge. |
| 3 | Material and labourNon skid ceramic coloured tiles7 to 8 mm thick (square)area of each tiles exceeding 0.06 Sqm but nexc 0.11 sqm,in floor etc set and jointed in neet cement slurryand pointed in white or coloured cement to match overincluding 15 mm thickscreed bed in cement mortar (1:6)including dismentling of floor tiling with cement mortar bedding (but not backing) removing seviceable tiles to store and rubbish off the premisescomplete all as specified and as directed by Engineer-in-Charge. |
| 4 | Material and labourNon skid ceramic coloured tiles7 to 8 mm thick (square)area of each tiles exceeding 0.11 Sqm but nexc 0.18 sqm,in floor etc set and jointed in neet cement slurryand pointed in white or coloured cement to match overincluding 15 mm thickscreed bed in cement mortar (1:6) including dismentling of floor tiling withcement mortar bedding (but not backing) removing seviceable tiles to store and rubbish off the premisescomplete all as specified and as directed by Engineer-in-Charge. |
| 5 | Material and labourfor Glazed ceramic tiles, coloured (light colour as approved),7 to 8 mm thick (square)area of each tiles exceeding 0.06 Sqm but nexc 0.11 sqm, on vertical surfaces such as in skirting/dado etc set and jointed in cement slurry over 10mm thick rendering in cement mortar (1:4) and pointed in white cement with pigment to match the colour of tilesincluding dismentling of floor tiling incl cement mortar bedding (but not backing) removing seviceable tiles to store and rubbish off the premisescomplete all as specified and as directed by Engineer-in-Charge. |
| 6 | Demolition of un-reinforced cement concrete in any positioncomplete all as specified and as directed by Engineer-in-Charge. |
| 7 | Material and labourfor 75 mm thickPCC (1:2:4) type B-1 using 20 mm gradedcrushed stone agg.as in floor, hard standing finishedcomplete all as specified and as directed by Engineer-in-Charge. |
| 8 | Taking down cement plaster & rendering 15 mm thickin cement mortar (1:4) on any face of brick walls or concrete surfaces, finished fair & even and applying two coats of cement based paint over chalk whitining on walls incl preparation of new surfacescomplete all as specified and as directed by Engineer-in-Charge. |
| 9 | Taking down cement plaster & rendering 10 mm thickin cement mortar (1:6) on any face of brick walls or concrete surfaces, finishedeben and smooth without using extra cement and applying two coats of white lime wash (white washing) incl preparation of new surfaces on wallscomplete all as specified and as directed by Engineer-in-Charge. |
| 10 | Taking down cement plaster on ceiling surfaces &rendering 5 mm thickin cement mortar (1:3) finished even &smooth without using extra cement and applying two coats of white wash incl preparation of surfacescomplete all as specified and as directed by Engineer-in-Charge. |
| 11 | Material and labourbrick work with sub class "B" bricks, straight or curved on plan exceeding 6m mean radius built in CM (1:6) incl demolition of brick work or stone/boulder masonary built in cement mortorcomplete all as specified and as directed by Engineer-in-Charge. |
| 12 | Demolition of brick work built in cement mortar of any specification and in any position and using old bricks in cement mortar 1:6 using sub class ‘B’ old size bricks, straight or curved on plan exceeding 6 metre mean radius retrieved from dismentling including cleaning and removal of mortar from old brickscomplete all as specified and as directed by Engineer-in-Charge. |
| 13 | Material and labourrendering 15 mm thickin cement mortar (1:4) on any face of brick walls or concrete surfaces, finished fair & even and applying two coats of cement based paint over chak whitining on walls incl preparation of new surfacescomplete all as specified and as directed by Engineer-in-Charge. |
| 14 | Taking downchowkhats or frames exc 1.50 Sqmbut n .exc 4 Sqm each, removing to or from store, including cutting holes in brick walls of appropriate size for insertion of cement concrete blocks for hold fasts,or otherwise as directedcomplete all as specified and as directed by Engineer-in-Charge. |
| 15 | Refixing wooden shutters of any description in same openingexc 1.00 Sqmbut n.exc 2.00 Sqm each, complete all as specified and as directed by Engineer-in-Charge. |
| 16 | Taking down chowkats or frames with shutters (without taking off shutters from the frames) of sizeexceeding 1.5 Sqm but n.exc 4 sqmeach including cutting holes in brick walls of appropriate size for insertion of cement concrete blocks for hold fasts or otherwise as directedcomplete all as specified and as directed by Engineer-in-Charge. |
| 17 | Supply and fixingfor Pressed Steel Frames for doors1.25 mm thick MS sheet of profile (105X60)mm for doors and windows frames with one or more rebates including necessary fixing lugs, hinges, lock, strike plates, shockabsorber 20mm dia,60mm MS conduit for housing of a drop bolt etc. treating of internal surfaces of chowkhats with coal tar or black paintcomplete all as specified and as directed by Engineer-in-Charge. |
| 18 | Supply and fixingfor Pressed Steel Frames for doors1.25 mm thick MS sheet of profile (125X60)mm for doors and windows frames with one or more rebates including necessary fixing lugs, hinges, lock, strike plates, shockabsorber 20mm dia,60mm MS conduit for housing of a drop bolt etc. treating of internal surfaces of chowkhats with coal tar or black paintcomplete all as specified and directed |
| 19 | Material and labourfor PCC (1:3:6) type C-1 using 20 mm gradedstone agg .as in filling steel frames etc including necessary form workcomplete all as specified and as directed by Engineer-in-Charge. |
| 20 | Material and labour forPCC (1:2:4) type B1 with using 20 mm graded stone agg as inbed blockhold fast blockcomplete all as specified and as directed by Engineer-in-Charge. |
| 21 | Taking down shuttersof any description exc 1 sqm and not exc 2 sqm each or otherwise as directedcomplete all as specified and as directed by Engineer-in-Charge. |
| 22 | Supply and fixing35 mm thick, 2nd class hard wood, plain framed, panelled shutters (any number of panels) with panels of timber flat on both sides (feather edged) or of veneered particles board medium density wood particle board with comercial face veneers, size of members as specified in clause 8.24 (a) of MES Schedule Part-I section-IIcomplete all as specified and as directed by Engineer-in-Charge. |
| 23 | Supply and fixing35 mm thick,2nd class hard wood, glazed and skeleton shutters open rebated and prepared to receive glass,gauge etc (without sash bars), edges of framing plain chamfered or rounded, fitted with cut and mitered beads for securing glass etc, size of members of shutters as specified in SSR part-I section 8, clause 8.24 (a) of MES Schedule Part-I Section-8,complete all as specified and as directed by Engineer-in-Charge. |
| 24 | Supply and fixing200 mm mild steel barrel tower bolt, stove enamelled black, with bright bolt complete all as specified and as directed by Engineer-in-Charge. |
| 25 | Supply and fixing150 mm mild steel pressed handles, oval type stove enamelled blackcomplete all as specified and as directed by Engineer-in-Charge. |
| 26 | Supply and fixingfor 250 mm Mild Steel sliding door boltsplate type, stove enamelled black, with bright boltnot less than 12 mm dia with and including a minimum 6 bolts and nuts, four on bolt plate and two on staple platecomplete all as specified and as directed by Engineer-in-Charge. |
| 27 | Supply and fixing 300mm, Mild steel ordinary rat tail rod patttern springs includding roller and roller platecomplete all as specified and as directed by Engineer-in-Charge. |
| 28 | Material and labourfor Preparation of new wooden surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primercomplete all as specified and as directed by Engineer-in-Charge. |
| 29 | Taking down chowkats or frames with shutters (without taking off shutters from the frame) of size not exceeding 1.5 Sqm each including cutting holes in brick walls of appropriate size for insertion of cement concrete blocks for hold fasts or otherwise as directedcomplete all as specified and as directed by Engineer-in-Charge. |
| 30 | Supply and fixingSolid PVC door frame of size 50mmx47mm made out of 5mm plain colour PVC sheetrainforced with MS square tubecomplete all as specified and as directed by Engineer-in-Charge. |
| 31 | Supply and fixingFactory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top and bottom rail MS frame shall be covered with heat moulded plain / coloured PVC "C"channel having a PVC sheet strip of20mm width stuck inside with solvent cement for styles and plain colour PVC sheets for top rail, lock rail & bottom rail;on either side & as gap insert for top rail;panelling of plain colour PVC sheet to be fitted in the MS frame welded/ sealed to the stiles & rails with suitable PVC sheet beading, and jointed together with solvent cementcomplete all as specified and as directed by Engineer-in-Charge. |
| 32 | Supply and fixingPTMT butt hinges, 100 mm long and fixed with steel screwscomplete all as specified and as directed by Engineer-in-Charge. |
| 33 | Supply and fixingPTMT tower bolts, 150 mm long and fixed with steel screwscomplete all as specified and as directed by Engineer-in-Charge. |
| 34 | Supply and fixing PTMT door handle, 150 mm long and fixed with steel screwscomplete all as specified and as directed by Engineer-in-Charge. |
| 35 | Supply and fixingfactory made box type steel window with glazed and mesh shutters with pintal hinges & 2 Nos 150 mm mild steel tower bolts to each shutter, steel handle two shutters withoutglazing bars and two shutters with glazing bars dovetailed or welded and with framed guard bars with one shop coat of zinc chromate primercomplete all as specified and as directed by Engineer-in-Charge. |
| 36 | Supply and fixingfactory made box type steel ventilator with with glazing bars dovetailed or welded and with one shop coat of zinc chromate primercomplete all as specified and as directed by Engineer-in-Charge. |
| 37 | Supply and fixing3 mm thick, plainsheet glass ordinary quality and glazing,with oil putty or with wooden beads, in squares n.exc 0.50 Sqm in eachcomplete all as specified and as directed by Engineer-in-Charge. |
| 38 | Supply and fixing3 mm thick, plainsheet glass ordinary quality and glazing,with oil putty or with wooden beads, in squares n.exc 0.50 Sqm in each including hacking out old broken glass (any thickness, size, quality or description) from wooden/ steel frames,complete all as specified and as directed by Engineer-in-Charge. |
| 39 | Supply and fixing stainless steel wire cloth0.56 mm nominal dia of wire and average width of aperture not more than 1.18 mm and fixed with stainless steel wire staplescomplete all as specified and as directed by Engineer-in-Charge. |
| 40 | Supply and fixingin repairs stainless steel wire cloth0.56mm nominal dia of wire and average width of aperture not more than 1.18 mm and fixed with stainless steel wire staplescomplete all as specified and as directed by Engineer-in-Charge. |
| 41 | Material and labourfor preparation ofnew steel surfaces of any description, over 10 cm width or girthand applyingtwo coats of synthetic enamel paint including one coat of red oxide primercomplete all as specified and as directed by Engineer-in-Charge. |
| 42 | Material and labourfor preparation ofnew steel surfaces of any description, over 10 cm width or girthand applyingtwo coats of synthetic enamel paint complete all as specified and as directed by Engineer-in-Charge. |
| 43 | Supply and fixingMild steel curtain rod chromium plated with fixing side brackets, end cups and fixed withPVC rawl plugs & steel screws as inrepairscomplete all as specified and as directed by Engineer-in-Charge. |
| 44 | Supply and fixing20 mm thick 2nd class hardwood boarding planed one side with butt joints fixed in shelves; Partitions and shelves of built-in cupboards, almirahs, book cases, toilet boxes, racks, pelmets and similar work, including dismantling boarding of any descriptioncomplete all as specified and as directed by Engineer-in-Charge. |
| 45 | Supply and fixing100mm long hasp and staple, safety type, aluminium anodised including bolt to hinge plate and fixed with screws and fixedcomplete all as specified and as directed by Engineer-in-Charge. |
| 46 | Supply and fixingMild steel butt hinge, 100 mm long, medium weight, cold rolledfixed with steel screws or welded to steel frame where requiredcomplete all as specified and as directed by Engineer-in-Charge. |
| 47 | Supply and fixingGalvanised iron steel water tubing, 15mm bore, medium grade with all fittings and fixed to walls and ceilings or laid in floors includingtaking up or down existing steel water tubingcomplete all as specified and as directed by Engineer-in-Charge. |
| 48 | Supply and fixingGalvanised iron steel water tubing, 20mm bore, medium grade with all fittings and fixed to walls and ceilings or laid in floors including taking up or down existing steel water tubingcomplete all as specified and as directed by Engineer-in-Charge. |
| 49 | Taking up or down existing steel water tubing, 15mm bore alongwith connections fixed/laid in any situation and fixing only, after cleaning old steel water tubing in new or old position using new fittingscomplete all as specified and as directed by Engineer-in-Charge. |
| 50 | Taking up or down existing steel water tubing, 20mm bore alongwith connections fixed/laid in any situation and fixing only, after cleaningin new or old position using new fittings complete all as specified and as directed by Engineer-in-Charge. |
| 51 | Supply and fixingin repair PVC low level flushing cistern (white) of 10 liters capacity with inlet ball float valve, PVC flush pipe and necessary fixing arrangements and connecting to water pipe and WC etccomplete all as specified and as directed by Engineer-in-Charge. |
| 52 | Supply and fixingVitreous china white squatting pan orrissa pattern of size 580mm x 440 mm with integral foot rests including necessary lime concrete and 100 mm bore cast iron ‘P’ or "S" trap with 550 to 600 mm long neck for connecting WC to branch piece with cement joints, fixed as in repair,complete all as specified and as directed by Engineer-in-Charge. |
| 53 | Supply and fixingin repair Viterous China wash down water closet pan (pedestal pattern), white incl. Seat and cover(excluding fixing bolts, flushing cistern and flush pipe)complete all as specified and as directed by Engineer-in-Charge. |
| 54 | Supply and fixingin repair Vitrous china (White) flat back urinal of size 465x355x265mmwith grating, union for discharge pipe, spreader, 40mm dia PVC waste pipe upto floor trap, , flush pipe, union for discharge pipecomplete all as specified and as directed by Engineer-in-Charge. |
| 55 | Supply and fixingin Repair seat cover For WC, any colour pattern with flat bottom and cover mild steel hinging devicecomplete all as specified and as directed by Engineer-in-Charge. |
| 56 | Supply and fixingin repairs vitreous china wash basin,white flat back,size (450X300) mm including 15 mm brass CP Pillar taps,waste coupling PTMT 32 mm,low density polylethylene pipes (LDPE) 32 mm dia 80 cm long, PVC conection15 mm dia 450 mm long,and bracketcomplete all as specified and as directed by Engineer-in-Charge. |
| 57 | Supply and fixingin repair 600x450 mm bevelled edge mirror of selected quality mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plug with chromium plated brassscrews and cup washerscomplete all as specified and as directed by Engineer-in-Charge. |
| 58 | Supply and fixingin repair 15 mm bore Bip tap cast copper alloy chomium plated with crutch or butterfly handle, screwed down,screwed for iron pipe or for brass ferrulecomplete all as specified and as directed by Engineer-in-Charge. |
| 59 | Supply and fixingin repairs15 mm bib tapstandard of PTMT any colour high pressure screwed for iron pipe (Min wt 90 Gms)complete all as specified and as directed by Engineer-in-Charge. |
| 60 | Supply and fixingin repairs 15 mm stop valve of PTMT any colour high pressure screwed for iron pipe(Min wt. 90 gms) complete all as specified and as directed by Engineer-in-Charge. |
| 61 | Supply and fixingin repairs 15 mm Stop valve/Angle valve cast copper alloy screwed down, high pressure screwed for iron pipecomplete all as specified and as directed by Engineer-in-Charge. |
| 62 | Supply and fixingin repair 500 ltr capacity rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position including 20mm bore ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball, 20 mm PTMTstop valve screwed for iron pipe all as specified in SSR Part-Icomplete all as specified and as directed by Engineer-in-Charge. |
| 63 | Supply and fixingin repairs 15 mm pillar taps,cast copper alloy, with capastan heads, chromium plated, screwed down high pressure, with or without lettered "Hot" or"Cold" with long screwed shanks and fly nuts, screwed for iron pipecomplete all as specified and as directed by Engineer-in-Charge. |
| 64 | Supply and fixingin repairs 15 ball valve, high pressure, of PTMT with epoxy coated aluminium rod and high density plastic ball,screwed for iron pipe ( min wt 142 gms)complete all as specified and as directed by Engineer-in-Charge. |
| 65 | Supply and fixing PVC connections 15mm size with PTMT nuts of length 450mmcomplete all as specified and as directed by Engineer-in-Charge. |
| 66 | Supply and fixingin 110 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls including distance pieces and stack clamps as in rain water pipes including taking down eaves gutters and RWPcomplete all as specified and as directed by Engineer-in-Charge. |
| 67 | Supply and fixingin 75 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls including distance pieces and stack clamps as in rain water pipes including taking down eaves gutters and RWPcomplete all as specified and as directed by Engineer-in-Charge. |
| 68 | Supply and fixing110 mm bore PVC (SWR) bends/shoe any radius fixed to walls including distance pieces and stack clampscomplete all as specified and as directed by Engineer-in-Charge. |
| 69 | Supply and fixing75 mm bore PVC (SWR) bends/shoe any radius fixed to walls including distance pieces and stack clampscomplete all as specified and as directed by Engineer-in-Charge. |
| 70 | Supply and fixingPVC waste pipe, 32mm bore suitable to waste coupling pipe attach with rubber ring joints fixed to waste coupling of sinks/WHBscomplete all as specified and as directed by Engineer-in-Charge. |
| 71 | Resecuring or eashing & adjusting, without taking down of shutters of any description of exc. 1 Sqm but n.exc. 2 Sqm eachcomplete all as specified and as directed by Engineer-in-Charge. |
| 72 | Dismantling of wall and ceiling boards (Fibre, pulp, insulation, etc.) or insulation boards/slabs/blankets, any thickness, including cover filletscomplete all as specified and as directed by Engineer-in-Charge. |
| 73 | Supply and fixingin repair to Hollow PVC wall lining consisting of 5mm thick single side prelam PVC sheet instead of plain colour sheet inclusive of solvent cement and fixing on PVC frame as per specified in MES schedule part-I & IIcomplete all as specified and as directed by Engineer-in-Charge. |
| 74 | Supply and fixingin rep of Gypsum Board 8 mm thick in ceiling fixed with screw 60x60cm placed in ceiling (Angle 25mm X 25mm , Main tee 38mmX23mm ,Sub tee 23mmX23mm) incl aluminium anodised/powder coated snap grid frame 605X605 mm for false ceiling incl hanging arrangement hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm longcomplete all as specified and as directed by Engineer-in-Charge. |
| 75 | Demolition of un-reinforced cement concrete and Material and labourfor Cement concrete type D-2, 1:4:8 in foundations, filling and mass-concretecomplete all as specified and as directed by Engineer-in-Charge. |
| 76 | Material and labourfor Sand filling under floors or in foundationincluding watering and consolidationcomplete all as specified and as directed by Engineer-in-Charge. |
| 77 | Material and labourfor Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658 -2006 of 60mm thickness, M-35 Grade with grey cement & no pigment including demolition of Stone slabs and tiles of any description laid bedded and pointed in any mortarcomplete all as specified and as directed by Engineer-in-Charge. |
| 78 | Material and labour for Chequered cement concrete tiles 30cm x 30cm x 25mm thick, set, jointed and pointed in neat cement slurry With grey cement and pigments in floors over 20 mm thick screed bed 1:6 including demolition of Stone slabs and tiles of any description laid bedded and pointed in any mortarcomplete all as specified and as directed by Engineer-in-Charge. |
| 79 | Supply and fixingGranite (of any type) work 18-20mm thick (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including demolition of Stone slabs and tiles of any descriptionlaid bedded and pointed in any mortarcomplete all as specified and as directed by Engineer-in-Charge. |
| 80 | Dismantling asbestos cement (corrugated or semi corrugated) sheets and Supply and fixingPre painted galvalume aluminium Zinc coating GI based corrugated steel sheet 0.5mm thick of an colour having tensile strength of 550 Mpa as in roof covering /cladding to wall fixed with self tapping screwsin roofingcomplete all as specified and as directed by Engineer-in-Charge. |
| 81 | Dismentlling timber in fillets, rails, posts, rafters, purlins, etc. under 40 sq. cm in sectioncomplete all as specified and as directed by Engineer-in-Charge. |
| 82 | Dismantling wrought iron or mild steel work of any description not otherwise provided forcomplete all as specified and as directed by Engineer-in-Charge. |
| 83 | Material and labour Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161- 1979 grade St.-24complete all as specified and as directed by Engineer-in-Charge. |
| 84 | Material and labour15 mm thick screed bed or bedding layer of mortar in CM(1:6) with water proofing compound @3% by weight of cement or as per manufacturer instructions will be on surface to have a smooth surface and Supply & fixing Polythene film, 50 micron thick, laid on a coat of bitumen primer, @ 0.30 to 0.50 kg per sq. m bitumen and laid on roof,complete all as specified and as directed by Engineer-in-Charge.. Note: WPC shall be measured and paid separately |
| 85 | Demolition of mud phuska in roofs, any thickness, including leeping plaster (whether full thickness removed or only a part thereof)complete all as specified and as directed by Engineer-in-Charge. |
| 86 | Material and labourfor 80mm thick average consolidated thicknessmud phuska on flat roof ncluding 25mm thick mud plastercomplete all as specified and as directed by Engineer-in-Charge. |
| 87 | Supply and fixing40 mm thick brick tiles laid on mud mortar and joints grouted flush in cement mortar(1:3) mixed with 5% of crude oil by weightof cement on mud phuska including Dismantling of brick tiles in roofsinglelayer jointed & pointed in cement mortar including removal of grass vegitation including rootscomplete all as specified and as directed by Engineer-in-Charge. |
| 88 | All as item No 87 above but except tilescomplete all as specified and as directed by Engineer-in-Charge. |
| 89 | Supply and fixingin repair grating doom 100 mm dia of PTMT (Minimum weight 25 gms)complete all as specified and as directed by Engineer-in-Charge. |
| 90 | Supply and fixingin repair 20 mm gun metal,globe or gate valve, with iron wheel head , screwed both ends for iron pipecomplete all as specified and as directed by Engineer-in-Charge. |
| 91 | Supply and fixingin repair brass Chromium plated shower roses 125mm with or without swivel joints, any size, including fixing to steel pipe or unioncomplete all as specified and as directed by Engineer-in-Charge. |
| 92 | Supply and fixingin repairsbrass choromium plated tubular towel rail, 20 mm dia, D type, 60 cm long between flangescomplete all as specified and as directed by Engineer-in-Charge. |
| 93 | Material and labourfor 4.5mm thick Linoleum, plain coloured, laid dry in floors including stretching, cutting and fitting including sealed down with an approved adhesive in repairscomplete all as specified and as directed by Engineer-in-Charge. |
| 94 | Material and labourfor Preparation of old decorated surfaces of wall and applying one coat of white lime wash (white washing) on walls including corneces, pillarscomplete all as specified and as directed by Engineer-in-Charge. |
| 95 | Material and labour for Preparation of old decorated surface of wall and applying one coat of oil emulsion distempercomplete all as specified and as directed by Engineer-in-Charge. |
| 96 | Material and labourfor Preparation of old decorated surface of wall and applying one coat of cement based paint including corneces, pillars etccomplete all as specified and as directed by Engineer-in-Charge. |
| 97 | Material and labourfor Preparation of old decorated surfaces on ceiling and applying one coat of white lime wash including cornice and pillars etccomplete all as specified and as directed by Engineer-in-Charge. |
| 98 | Material and labourfor Preparation of old painted wood or wood based surfaces of any description not otherwise described over 10cm width or girth and applying one coat of synthetic enamel paintcomplete all as specified and as directed by Engineer-in-Charge. |
| 99 | Material and labourfor Preparation of old decorated surface of steel surfaces of any description not otherwise described over 10 cm width or girth and applying one coat of synthetic enamel paintcomplete all as specified and as directed by Engineer-in-Charge. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
