Military Engineer Services-MES has published Tender For Repair Maint To Joinery Plastering Plumbing Sanitary Fitting And Other Misc Work In Jco Ors Md Accn And Repairs Maint To Drains Culverts Fencing Hardstanding Footpath Compound Wall In Md Accn Area Of Age Br I Under Ge Mis Mhow. Submission Date for this Tender is 29-05-2024. Building Work Tenders in Indore Madhya Pradesh. Bidders can get complete Tender details and download the document.
| Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
| 1 | 15-May-2024 | Other Corrigendum | Other | 29-05-2024 |
| FileName | File Description | File Size |
| 54016933-96d3-41bc-89be-595e9a327f3e.html | Tender Notice | 0 KB |
| BOQ_731084.xls | Tender Document | 0 KB |
| PS8665.pdf | Tender Document | 0 KB |
| TENDER8665.pdf | Tender Document | 0 KB |
| Tendernotice_1.pdf | Tender Document | 0 KB |
| Sl. No. | Item Description |
| 1 | Taking downchowkat or frame area not exceeding 1.5 Sqm each with shutter (without taking off shutters from frames) |
| 2 | Taking down chowkhats or frames with shutters without taking off shutters from the frame exceeding 1.5 Sqm but not exceeding 4 Sqm each |
| 3 | Taking down shutters of any descriptionarea exceeding 1.00 Sqm butnot exceeding 2.0 Sqm all as specified |
| 4 | Taking down shutters of any descriptionareanot exceeding 1.00 Sqmall as specified |
| 5 | Taking down Shutters of any description exc 1 sqm and n. exc 2 sqm each and refixing in the same opening after repairing complete all as specified |
| 6 | S & F Solid PVC door frame of size 50mm x 47mm made out of 5mm single side prelam PVC sheet reinforced with MS square tube,edges will be paited to match with prelam sheet supplying & fixing in opening as per specification and drawings including all fixtures shown on drawings complete all as specified and directed. |
| 7 | S & F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails. M S frame shall be covered with heat moulded prelamPVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and single side prelamPVC sheet for top rail, lock rail & bottom rail on either side and as gap insert for top rail & bottom rail; stile &rails having one side feathered edge and on other side 10mm 90^0bent edge,Paneling of prelamPVC sheet to be fitted in the MS frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and jointed together with solvent cement, supplying & fixing in the frame at site as per specification & drawing.given SSR 2010 complete all as specified and directed. |
| 8 | S & F aluminiumanodised barrel tower bolts of extruded section 100 mm long |
| 9 | S & F aluminum anodised alloy handle 100 mm cast type |
| 10 | S&F Butt hinges, medium weight,cold rolled mild steel, 75mm size |
| 11 | S&F second class HardWoodshutters 35mm thick, plain framed panelled shutter factory made(two panel) with lock rail & panel of 9mm BWP commercial ply or 12mm veneered particle board with commercial veneering on both faces. The size of rail and style as per IS:1003 complete all as specified |
| 12 | S&F 30 mm thick flush shutters, solid core construction, with block board core & plywood face panels, commercial type on both sides complete all as specified and directed |
| 13 | S&F 35mm thick second class hard wood glazed and skeleton shutters, open rebated and prepared to receive glass, gauze etc. (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc.; size of members of shutters as specified in SSR Part – I, Section – 8, clause 8.24(a) ; supplied and fitted to chowkats all as specified Note :- Glass pane and wire mesh shall be measured and paid separately under relevant item |
| 14 | S&F 30mm thick second class hard wood glazed and skeleton shutters, open rebated and prepared to receive glass, gauze etc. (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc.; size of members of shutters as specified in SSR Part – I, Section – 8, clause 8.24(a) ; supplied and fitted to chowkats all as specified Note :- Glass pane and wire mesh shall be measured and paid separately under relevant item |
| 15 | S&F Plain, solid, straight chowkhats and frames of secondclass Hard Wood wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, supplied and fixed all as specified |
| 16 | M&Lfor cutting holes in brick/block wall exc hlaf brick but n.exc one brick built in cementmortar of any description for inserting holdfasts and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 Type B1 as required complete all as specified. |
| 17 | S&F mild steel bands, straps, support or stays for rainwater ventilating pipes including bolts if required, hook and eye, hold fast, wall ties hooks for hanging fans, plain angle etcall as specified |
| 18 | S&F aluminium alloy anodised sliding door bolt 300 mm long with hook and staple(bolt type) and fixing clip of sheet coat or extruded section and fixing bolt and sliding bolts of extruded section. |
| 19 | S & F aluminiumanodised barrel tower bolts of extruded section 150 mm long |
| 20 | S & F aluminum anodised alloy handle 150 mm cast type |
| 21 | S&F in repairs aluminium alloy anodised sliding door bolt 300 mm long with hook and staple(bolt type) and fixing clip of sheet coat or extruded section and fixing bolt and sliding bolts of extruded section. |
| 22 | S & F in repairs aluminiumanodised barrel tower bolts of extruded section 150 mm long |
| 23 | S & F in repairs aluminum anodised alloy handle 150 mm cast type |
| 24 | S & F stainless steel butt hinges 100 mm long. |
| 25 | S&F Butt hinges 100mm size, medium weight, cold rolled mild steel. |
| 26 | S&F Continuous (piano) hinges, mild steel, bright finish or electro galvanised with width of flaps (When open) 30 mm |
| 27 | S&F in repairs Continuous (piano) hinges, mild steel, bright finish or electro galvanised with width of flaps (When open) 30 mm |
| 28 | S&F 4mm thick sheet glass ordinary quality and glazing with oil putty in squares n.exc 0.5sqm in each panes includinghacking out old glass all as specified. |
| 29 | All as per item No. 28above but for figured glass pin-headed type. |
| 30 | S&F glazing with 4.8mm thick sheet glass ordinary quality includingrubber beading /gasket around glass panes and hacking out old glass complete all as specified. |
| 31 | S&F stainless steel wire mesh of size 0.36 mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples. |
| 32 | S&F in repairs stainless steel wire mesh of size 0.36 mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified |
| 33 | S&F mild steel300mm ordinary rat tail rod springs including roller and roller plate complete |
| 34 | S&Fin repairs mild steel300mm ordinary rat tail rod springs including roller and roller plate complete |
| 35 | M&L for preparation ofnew wooden surfaces of any description, not otherwise described, over 10 cm in width or girth and applying two coats of synthetic enamel over coat of pink primer. |
| 36 | M&L for preparation of old painted surfaces of wood/wood based materials exc 10cm in width or girth and applying one coat of synthetic enamel paint all as specified. |
| 37 | S & Fin repairs 150mm floor door stopper of aluminium alloy body and tongue anodised with hard drawn steel spring fixed in floor. |
| 38 | S & F in repairs aluminium extruded section body Door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851to 1000 mm in width and of weight between 61 to 80 kg |
| 39 | S&F 40mm dia, cupboard knobs with nut, screw & washer of brass, polished |
| 40 | S&FHasp & staple of 100mm size , mild steel, wire type, stove enamelled black, including bolt to hinge plate with screws. |
| 41 | S&F in repairs Hasp & staple of 100mm size , mild steel, wire type, stove enamelled black, including bolt to hinge plate with screws. |
| 42 | M&L in repairs 18/19mm thick Prelaminated particle board, Exterior grade,prelaminated one side with decorative choice lamination &other side balancing white lamination,fixed with screws to timber frame work complete all as specified. |
| 43 | M&L in repairs 18/19mm Veneered particle boards interior grade,solid core, general purposes type, faced with decorativeveneers on one face of type "BB", fixed with screws to timber frame work complete all as specified. |
| 44 | S&F in repairs aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips,rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1 no.)incl powder coating of any colour (Thickness or powder coating not less than 50 micron).complete all as specified |
| 45 | M&Lfor Brick work with sub class "B" bricks with using Modular size Brick , straight or curved on plan exc 6m mean radius built in CM 1:6 including dismantlingof existing brick workcomplete all as specified |
| 46 | All as per item No 45 above but except bricks dismantlingof existing brick workcomplete all as specified .Note:Serviceable bricks obtained from dismantling shall be reused. |
| 47 | M&L for racking out joints/pointing to to block in course masonry, or concrete block walling in cement mortar all as specified |
| 48 | M&L for keyed pointing to random or polygonal rubble, uncoursed or brought upto course in cement mortar (1:3) |
| 49 | M&L for Stone walling of square rubbled masanory, regular coursed (Bangalore type) well bounded and solidity hearted built in CM 1:6 incl demolition of old stone masonary all as specified and as directed. |
| 50 | All as per item No. 49 above but except stones Complete. |
| 51 | M&L for rendering 15mm thick plaster in CM (1:4) onfair faces of brickwork or concrete surfaces, finished even and smooth without using extra cement mixed with Dr fixit pidiproof LW 200ml/50Kg of cementincluding takin down existing cement plaster complete all as specified and directed. Note: WPC shall be measured and paid separately under relevant item. |
| 52 | M&L for rendering 15mm thick plaster in CM (1:4) onfair faces of brickwork or concrete surfaces, finished even and smooth without using extra cement mixed with WPC complete all as specified . Note: WPC shall be measured and paid separately under relevant item. |
| 53 | Supply only Liquid Water proofing compound PIDIPROOF LW+ of Dr FIXIT or equivalent as approved. |
| 54 | M&L for rendering 10mm thickin CM 1:6 on fair faces of brick work or concrete surfaces, finished even and smooth without using extra cementincluding takin down existing cement plaster complete all as specified |
| 55 | M&L for rendering 5mm thick on concrete surfaces in cement mortar 1:3 finished on even and smoothwithout using extra cement as in ceiling, chajja etc. including takin down existing cement plaster complete all as specified |
| 56 | M&L for preparation of new plastered surfaces of walls and applying two coats of cement base paint over a coat of white wash complete all as specified |
| 57 | M&L for preparation of new plastered surface and applyingtwo coats ofexterior weather proof water base emulsionpaintwhite/coloured over a coat of primer complete all as specified |
| 58 | M& L for applying twocosts of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted ) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqmonnew plastered surfaces complete all as specified |
| 59 | M&L for preparation of newly plastered surfaces of walls and applyingtwo coats of oil bound distemper over a coat of primer white or tintedcomplete all as specified |
| 60 | M&L for preparation of new surface of wall and applying three coats of white wash complete all as specified |
| 61 | M&L for preparation of newly plastered surfaces ofceiling,chajja and applying three coats of white wash complete all as specified |
| 62 | M&L for preparation of newplastered surfaces of wall and applying two coats of cement base paint over a coat of white wash complete all as specified |
| 63 | M&L for preparation of old plastered surfaces of wall and applying two coats of cement base paint complete all as specified |
| 64 | M& L for applying twocosts of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted ) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm on oldplastered surfaces complete all as specified |
| 65 | M& L for applying twocosts of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted ) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm on new plastered surfaces complete all as specified |
| 66 | M & L for preparation of old decorated surfaces of wall by washing rubbing down and stopping of distempered surfacesand applying one coat of oil bound distemper complete all asspecified. |
| 67 | M&L for non skidceramic colouredtiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.06 sqm but not exc 0.11 sqm in floors etc set and jointed in neat cement slurry and pointed in colouredcement to match with colour of tile over and including 15mm thick screed bed in CM 1: 6andincluding dismantling of old tiles complete all as specified. |
| 68 | M&L for non skidceramic colouredtiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exc 0.18 sqm in floors etc set and jointed in neat cement slurry and pointed in colouredcement to match with colour of tile over and including 15mm thick screed bed in CM 1: 6andincluding dismantling of old tiles complete all as specified. |
| 69 | M&L for glazed ceramic colouredtiles 450X300X 6mm to 7mm thick as in vertical surface as in skirting/dados , set and jointed in neat cement slurry and pointed in colouredcement to match with colour of tile over and including 10 mm thick rendering in CM 1:4 andincluding dismantling of old tiles complete all as specified. |
| 70 | M&L for glazed ceramic colouredtiles 300x200mmx6mm to 7mm thick as in vertical surface as in skirting/dados , set and jointed in neat cement slurry and pointed in colouredcement to match with colour of tile over and including 10 mm thick rendering in CM 1:4 andincluding dismantling of old tiles complete all as specified. |
| 71 | M & Lfor machine cut kota stone slab inflooring 20-25mm thick laid over and including 15mm thick screed bed in CM 1:6 & cement mixed with pigment to match the shade of slab including rubbing and polishing including dismantling existing kota stoneslab of any description complete all as specified |
| 72 | M&L for20mm thick Granite (of any type) work (table rubbed and polished and exposed visible edge moulding /rounding ) in steps, jambs, pillars, window cills, cooking platforms and like in 15mm thick cement mortar (1:4) including pointing withwhite cement (1:2) mixed withmarble dust andadmixture of pigment to match with shade of granite including dismantling existing granite slab of any description . |
| 73 | M&L for 20 mm thickgranite (black) machine cut asin skirting / dado laid over and including 10 mm thick backing coatin CM (1:4) jointed with grey cement slurry, and pointed with white cement mixedwith admixture of pigment to match the shade of granite stone including grinding and polishing of approved quality ofany sizecompete includingdismantling of old granite all as specified and as directed. |
| 74 | M&L for plain cement concrete 1:4:8type D2 using 40mm graded stone aggregate , 75mm as in sub base including demolition of existing concrete of any description complete all as specified |
| 75 | M & L forchequered cement concrete tiles (glossy finish) 40 cm x 40 cm x 25 mm thick set ,jointed and pointed in neat cement slurry in floors with grey cement andno pigmentlaid over and including 15 mm thick screed bed or bedding layer in CM (1:6) and providing necessary PCC 1:3:6 type C1 coping including dismantling of existing tile of any descriptionall as specified |
| 76 | M&L for machine pressed rubber mouldedprecast concrete interlocking paver block (glosy finish) any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade with grey cement and pigmentlaid on 50 mm thick stone dust cushioning laid dry to the profile and providing necessary PCC 1:3:6 type C1 coping including dismantling of existing paver block /tileof any descriptionall as specified. Note: Sand cushioningshall bemeasured & paid seperately under relevant item. |
| 77 | M&L for 80 mm thick machine pressed precast concrete interlocking paver block (glossy finish) of M-40 Gde of approved shape, size & colour confirming to IS 15658-2006 with grey cement and no pigment and necessary PCC coping ,type C1 1:3:6 incl dismantling of old laid bedded and pointed in any mortar Stone slabs and tiles of any description or thickness in floors, aprons etc. complete all asspecified and as directed. |
| 78 | M&L for Stone dust filling under floors 50mm thickincluding watering and consolidation. |
| 79 | M&L for rounding of edges of stone slabs such as granite,kota stone etc as insteps, cooking platform and other similar situations complete all as specified |
| 80 | S&F in repairs GI tubing 15mm boremedium grade with all fittings ,fixedto walls /ceiling or laid in floors complete all as specified |
| 81 | S&F in repairs GI tubing 20mm boremedium grade with all fittings ,fixedto walls /ceiling or laid in floors complete all as specified |
| 82 | S & F in repair Galvanised steel tubes 50mm diamedium grade for cattle trap,spout pipe etc including welding, greasing etc all as specified and directed. |
| 83 | M&L for cutting chases not exceeding 10cm for concealed water tubing, pinning in, making good to facings where required and pointing in CM 1:3and making good the disturbed surface all as per existing complete all as specified |
| 84 | S&F in repairrotational moulded polythylenewater storage tankof 500 litres capacity, double layered (cylindrical / vertical with closte top) hoisted and fixed in position all as specified in SSR Part-I including providing and fixing PTMT ball valve high pressure with polythene float and fly nut, 20mm bore complete |
| 85 | S&F in repairrotational moulded polythylenewater storage tankof 1000 litres capacity, double layered (cylindrical / vertical with closte top) hoisted and fixed in position all as specified in SSR Part-I including providing and fixing PTMT ball valve high pressure with polythene float and fly nut, 20mm bore complete |
| 86 | S&F 20 mm dia Ball valves high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed. (Minimum weight 20 mm - 210 gms) complete all as specified |
| 87 | S&F in repairs 20 mm dia Ball valves high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed. (Minimum weight 20 mm - 210 gms) complete all as specified |
| 88 | S & F in repair vitreous china squatting Pan “Orissa” Pattern, of size 580mm x 440mm white colour with integral foot rests (excluding flushing cistern and flush pipe) including provisionof cement concrete bedding complete all as specified and directed. |
| 89 | S&F in repair Vitreous China wash down water closet pan (pedestal pattern), white colour (excluding fixing bolts, flushing cistern & flush pipe) incl Plastic water closet seat, white colour, closed pattern with flat bottom, & cover & mild steel CP or aluminised hinging device. |
| 90 | S & Fin repair wash hand basins, white colour,vitreous china,of size 550x400mm (flat back, or angle back type)including cutting for and pinning in ends of brackets or erecting standinclusive ofwaste pipe,waste coupling etc complete all as specified |
| 91 | S&F in repairs32mm dia PVC waste pipe fixed to WHB,sink,Urinal complete all as specified and directed. |
| 92 | S&F in repairs32mm dia Waste coupling of PTMT (half or full threaded) (Minimum weight 45gms)for kitchen sink complete all as specified |
| 93 | S&F 15mm bore pillar taps, half turn cast copper alloy with capstan heads, chromium plated,fancy type screwed down high pressure with or without lettered “HOT” or “COLD” with long screwed shanks and fly nuts complete all as specified |
| 94 | S&F in repair 15mm bore pillar taps, half turn cast copper alloy with capstan heads, chromium plated,fancy type screwed down high pressure with or without lettered “HOT” or “COLD” with long screwed shanks and fly nuts complete all as specified |
| 95 | S & F in repairs 10 litrescapacity PVC flushing cistern, low or high level, with inlet, ball valve, syphonic action type, float and handle, PVC Flush pipe, pull or push type including brackets complete all as specified |
| 96 | S & F in repair CP brass fancy type 15mm bore bib taps half turn, screwed down , and screwed for iron pipe or for brass ferrulecomplete all as specified |
| 97 | S & F in repairs PVC connections 15 mm size with PTMT nuts of length 600mm |
| 98 | S & F in repairs CP fancy type stop valves ,cast copper alloy concealed type, screwed both ends for iron pipe orforunionof 15mm bore complete all as specified |
| 99 | S&F in repair CP mixer for WHB mixing hot & cold water screwed down for ironpipe 15mm borecomplete all as specifiedanddirected. |
| 100 | S & F in repairs Wall mixture cromium plated continental non telephonic wall mixer showerhot & cold, 15mm bore, bright finish with three joints screwed the ends for iron pipeand plugging complete all as specified and directed. |
| 101 | S & F in repairs angle stop valves one way, brass chromium plated, fancy type, fixed to iron pipe or for unions 15mm bore |
| 102 | S&Fin repairs health faucet with flexible pipe of one metrelength including stand complete all as specified |
| 103 | S&Fin repair fancy type chromium plated two way bib cock of 15mm boretwo way bib cock screwed for iron pipe or brass ferrule etc complete all as specified |
| 104 | S & F in repairs CP Brass Fancy type shower rose 125mm dia with shower arm 30mm longof approved quality complete all as specified |
| 105 | S& F in repair CP toilet paper holder complete all as specified |
| 106 | S&F in repairs PVC (SWR) gully trap 125/110 mm,setting and jointing with solvent cement complete all as specified |
| 107 | S&F in repairs 75mm dia PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified |
| 108 | S & F in repair stainless steel sink with drainage board made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers and wastes; incl bedding in cement mortar to dwarf wall or incl fixing cantilever brackets and connecting union to pipe overall size 915x460mm bowl size 410mm x 330mm x 160mm complete all as specified and directed. |
| 109 | S&F in repairs stainless steel plate rack for kitchen 1mm thick of best quality with suitable hanging arrangement and fixed to wall complete all as specified Note : size of plate rack shallnot be less than 900x 200x1200mm and weight of rack shall not be less than 8.50 kg each. |
| 110 | S & F in repairs 18x24 inch size frameless beveled edge mirror of selected quality glass 5.5mm thick, wall mount, decorative mirror glass, rectangular,polished finish both home and commercial use and fixed with mounting hook pre-installed on the mirror complete all as specified and directed |
| 111 | S & F in repairPVC body bathroom cabinet with mirror fancy type made out of 5.5mm thick mirror of size 350 x 450mm complete |
| 112 | S&F in repairs brass chromium plated corner glass shelf 5mm thick with bracket complete all as specified |
| 113 | S&F in repairs shelfglass assembly consisting of 5.5mm thick sheet glass,shelf 120mm wide with CP bracket guard and railing 600mm long. |
| 114 | S&F in repairs soap dish (oval) type mild steel chromium plated ofsize not less than 50mm dia complete. |
| 115 | S&F in repair Grating doom 125 mm dia with waste hole of PTMT. (Minimum weight 40gms) complete all as specified |
| 116 | S&F in repairs of brass CP tubular towel rail 20 mm dia 60cm long between flange with brackets etc complete all as specified and directed. |
| 117 | S & F in repairs CP towel ring 150mm diacomplete all asspecified. |
| 118 | S&F in repair Plastic water closet seat cover, white colour, closed pattern with flat bottom, & cover & mild steel CP or aluminised hinging device complete all as specified . |
| 119 | S&F in repairover headtank cover suitable for500 / 1000 litres capacity water tank |
| 120 | S&F in repairs 25 mm dia stainless steel curtain rod as approved by Engineer-in-Charge |
| 121 | S&F in repairs 25 mm dia stainless steel decorative brackets with necessary fixing arrangementscomplete all as specified |
| 122 | S&F in repairs PVC (SWR) pipes 110mm bore single socketed in any length with rubber ring joints fixed to walls complete all as specified |
| 123 | M&L for plain cement concrete 1:3:6 type C2 using 40mm graded stone aggregate,50mm thickas in plinth protection etc. including demolition ofexisting cement concrete of any description complete all as specified |
| 124 | M&L for 75 mm thick PCC 1:3:6type C2using 40mm grade aggregateas in plinth protection, floor etcfinished the surfaces even & smooth without using extra cement includingdemolition of existingcement concrete plinth protection of any description complete all as specified |
| 125 | S&F in repair25 mm thick pre-cast cement concrete 1:2:4 type B0 using 12.5 mm graded stone aggregate as in louvers and jallies (measured solid), including all mouldings and including pre-cast frame set in cement mortar 1:6 complete all as specified |
| 126 | M&L for repair to sunken floor by provide water proofing treatment to sunken floor surfaces of RCC slabby the following specifications all as specified and directed :- (a) Demolition of old sunken surfaces complete and cleaniong of all loose particles and apply cement slurry @3.00 kg / sqm on old surfaces by brushing. (b)Provide PCC 1: 1.5:3 type A1using 12.5mm graded stone aggregate in slope, average thickness 50mm on sunken floor slab mixed with and including integral water proofing compound manufactured by Dr FIXIT or otherequivalent as approved, finish the surface even & smooth without using extra cement. (c) Rendering 15mm thick in CM 1:3 mixed with & including integral water proofing compound on sunken floor and sides of (Vertical surface) sunken portion. (d) Applying surfaces of bituminous primer (conforming to IS-3384-1965) @0.40 Kg/Sqm complete. On complete sunken surfaces of floor & wall and provide necessary connections to soil/waste pipe from WC/ nahani trap etc including demolition of old sunken complete all as specified and as directed. |
| 127 | (e) After laying of all sewage/plumbing pipes with fixtures in position, apply two coats of polymeric based chemical as per manufactures instructions over bottom and sides of sunken portion upto 600 mm height. (f) APP based polymeric membrane minimum weighing 3kg/sqm and minimum 3mm thick reinforced with plyester non wove fabric (wt. not less than 150 gms/sqm) laid on primed surface by forced application complete all as specified and directed. (g) Fill the sunken floor with PCC 1:5:10 type E-2 using brick aggregate. (h) Fixing of 50 mm dia CPVC pipe projecting 450 mm clear of face outer wall shall be provided to drain out seepage water if any. (i) Testing of sunken all as directed by Engineer-in-Charge at site NOTE : Floor Areaonly shall be measured for payment purpose |
| 128 | M&L for cutting of shubs,vegetation including small trees,grass,bush,weed and roots under growth and saplings n.exc 30cm in girth completely from buildingswall / roof /chajja etc of any height upto 14mincludingproviding necessary scaffolding/ ladder,safety devices etcas required at siteand removing vegetation to a distance n.exc 50 m,clearing off from site complete all as specified and directed. Note:Each building shall be measured as one unit |
| 129 | M&L for cleaning and removing all scale and dirt, etc from water tanks of capacity exceeding 250 litres but not exceeding 500 litres and from mouth of circulating pipes, etc including writing date of cleaning and applying a coat of bleaching powder complete all as specified |
| 130 | M&L for cleaning and removing all scale and dirt, etc from water tanks of capacity exceeding 500 litres but not exceeding 1000 litres and from mouth of circulating pipes, etc including writing date of cleaning and applying a coat of bleaching powder complete all as specified |
| 131 | S & F in repair over headtank coversuitable for 500 / 1000 litrescapacity water tank all as specified |
| 132 | M&L for reparing of RCC roof projection, chajjas,roofs, facia, column etc by necessary preparation i.e scrapping ,cutting,chiseling,derusting and cleaning exposed reinforecement, surfaces of damaged, loose RCC surfaces and applying one coat of rust removerby brushing to rusted reinforecemnt to remove loose rust particlesand allow to dry it for 2 to 3 Hours , insert the new reinforcementto damaged portion by drillig hole at required distance , fill the epoxy in to the hole by 2/3 of the hole and insert the reinforcement in the hole, and binding the reinforcement at rusted portion of reinforcement,applycement slurry on entire damaged area , and plasterthe surfaces with cement , sand and Polymer liquid in 1: 3 : 15% of cement by weight ) and water as required , mixing properly and plaster the surface , finished even and smooth by making the edge water dropping groves complete all as specified and directed. Note : Work shall be carried out to the building to a height of12 metreandquoted rate shall be inclusive for necessary scaffolding and safety devices as required at site . Nothing extra shall be admissibleon this account . |
| 133 | M & Lfor PCC 1:2:4 type B0using 12.5 mm graded crushed stone aggregateas in padding on roof surface for correcting / making proper slope on roof, and finishedthe surfaces fair and even without using extra cement complete all as specified. |
| 134 | M&L for removing the existing APP membraneroof treatment of any descriptionincluding screed bed /plastering of any thickness and removing off the debris outside MD landetc. and carrying out the followingroof treatment complete all as specified and as per Manufacture"s instruction : (a)Cleaning the existing roof surface and brushing with neat cement slurry @ 3 Kg per Sqm (b)Rendering15mm thick in cement mortar 1:4 mixed with integral water proofing compoundandfinish the surface even and smooth without using extra cement(c)Preparation of roof surfaces andapplying bituminous primer (conforming to IS-3384-1965) @ 0.40 Kg/Sqm (d)Cutting out cracks to V- section in existing roofs or terracing, cleaning out, wetting, grouting with cement and sand slurry 1:3 complete all asspecified. |
| 135 | (e)Applying two coats of tack coat of Industrial bitumen grade of 85/25 at the rate of 1.2 Kg per sqm including cleaning surfaces (1st coat as a bonding material below membrane and 2nd coat on top of membrane (f)APP based polymeric membrane 3mm thick and minimum weighing 3kg/sqm and reinforced with polyster non wove fabric (weightnot less than 150 gms/sqm)land on primed surface by forced applicationcomplete all as specified and as per Manufacturer instruction (g) Applying two coats of bitumen based aluminium paint@ 0.15 Kg/Sqm for each coat over APP membrain including preparation of surface complete all as specified |
| 136 | Excavating in post holes (or similar holes) each in soft/loose soil n exc 0.5 cu. m, getting out, returning, filling in and ramming earthor broken rubble mixed with earth around, in layers n exc. 25 cm complete all as specified . |
| 137 | S&F in repair mild steel framed work Fe-410-W (Gde-E-250) quality-B as in doors or gates of angle or other section with gusset plates, rails braces, etc, complete, drilled for fixing of steel sheeting or other covering.Door, etc to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings ( exclusive of steel sheeting or other covering, running rail and guides) and hanging also fastening and fixing complete all as specified |
| 138 | S&Fin repair mild steel work (Tubular, square/rectangular hollow section) as in purline, rafter and wind ties, cleat roof trusses etcincluding securing bed plate, plat iron fillets for securing wire mesh etc including all necessary drilling bolting or riverting, etc, and similar work conforming to IS 1161-1979 dge St-240 complete as directed and specified. |
| 139 | M&L for preparation of new steeland iron surfaces of any description, not otherwise, described, over 10cm inwidth or girth and applyingtwo coats of synthetic enamel paint over a coat of primer all as specified . |
| 140 | M&L for preparation of oldsteeland iron surfaces of any description, not otherwise, described, over 10cm inwidth or girth and applyingonecoat of synthetic enamel paintcomplete all as specified . |
| 141 | S&F in repairs 0.50mm thick (total coated thickness) pre-colour, pre profiles Galvalume/zincalume sheets of required colour and design having tensile strength of 550 Mpa,zinc colour coating AZ-150 as in roof,wall cladding,north light curves,fixed with zinc coated self drilling fastener including EDPM washer complete laid with one corrugation sidelaps and min 150mm end laps laid to slope all as per manufacturer/profile maker instructions complete all as specified and directed . |
| 142 | M&L for cutting channels, grooves or rebates not exceeding15cm in girth, and trimming surface with or without reinforcement for inserting galvalume sheet on wall includingnecessary coping work over the sheet along the wall all as directed by Engineer-in-Charge |
| 143 | M&L for cement concrete 1:2:4type B0using 12.5mm graded aggregate as in copings, kneelers, apex stones,bed plates, kerbs, water troughs and the like including weathering, slightly rounded or chamfered angles and throatingas directed |
| 144 | M&L for providing and laying factory-made kerb stone of M25 grade cement concrete asin position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete. |
| 145 | M&L forproviding pre-cast cement concrete 1:2:4 typeB1 using 20 mm graded stone aggregate as in cover slab of manholes, septic tank, soak well etc set in cement mortar 1:4 with plain fair faces including chamfered ,weathering, throating etc includingnecessary use and waste of form work and demolition of old RCC slab of any description complete. |
| 146 | S&F Mild steel TMT bars 10 mm dia and over, cut to length, bent to shape required, including crancking, bendingspirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.90 mm dia or securing with clips complete all asspecified. |
| 147 | M&L for PCC 1: 2 :4 type B1 using 20mm gradedcrushed stone aggregateas in surface channels and drains including necessary form work complete all as specified |
| 148 | M&L for extra for forming fair finished drain or channel, 30 cm inner girth in cement concrete using extra cement including forms, moulds, mitred, stopped ends, complete all as specified |
| 149 | M&L for PCC 1:3:6 type C2 using 40mm graded broken stone as in surface channel and drain includingnecessary form work etc complete all as specified |
| 150 | M&L for plain cement Concrete 1:3:6 type C2 using 40mm graded aggregateas in walls or retaining walls, any thickness, size or shape including pillasters, buttresses columns, pillars, boundary pillars & posts (including caps & bases) complete all as specified . |
| 151 | S&F in repair MS Hand rails, half round or other stock section hand-rail straight portion,drilled and countersunk for balusters running bars,nosing to steps incl embeding in concrete and screwing etc. wind ties for roof including securing bolts;posts and struts in fencing includingcutting tops to shape as directed, drilling holes,notching for wire, etc.; flat iron fillets , all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165 complete all as specified |
| 152 | S&F in repairs Mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, exc 5cm long n.exc 10cmm long and diameter of neck 5 to 10mm complete all as specified |
| 153 | S&F in repair mild steel Round bar 10 mm dia and over cut to length band to shape required incl cranking, bending spirally for similar work. conforming to Fe-410-W(Gde.E-250) quality-A or Fe 290 (Gde-E-165) complete all as specified |
| 154 | S&F mild steel work as in posts and struss of fencing, fillets, plates etc including cutting tops to shape as directed,drilling holes, notching for wire etc including all necessary drilling, bolting or ribeting etc complete confirming to Fe 410-0 or Fe 310-0 |
| 155 | S&F in repair Galvanised 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanized mild steel wire, staples or steel pins, etc. as directed (each line wire to be measured). |
| 156 | Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc.including provission of binding wire including dismantling of fencing wire mesh any type. |
| 157 | Supply Chain link MS galvanisd fencing, any size or type |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
