Military Engineer Services-MES has published Tender For Construction Of Defi Otm Accn Conf Room At Mil Stn Narendra Nagar Under Ge 871 Ews. Submission Date for this Tender is 30-05-2024. Building Work Tenders in Tehri Garhwal Uttarakhand. Bidders can get complete Tender details and download the document.
| FileName | File Description | File Size |
| 33c058f0-bca2-4350-bd66-81898dd4e100.html | Tender Notice | 0 KB |
| BOQ_722187.xls | Tender Document | 0 KB |
| RETENDERDocs8775.pdf | Tender Document | 0 KB |
| Tendernotice_1.pdf | Tender Document | 0 KB |
| Sl. No. | Item Description |
| 1 | Note 1: Contractor shall own his arrangement carry out the testing for design mix, Soil testing,WPT treatment, ATT Treatment through a approved consultant, which isapproved by MES dept. and submit a report duly Approved by Accepting officer.Note 2: Contractorshall submit a performance guaranteefor ATT & WPT treatment and also submit a security deposit as prescribed in CA. |
| 2 | Surface excavation n.exc (not exceeding) 30cm deep and averaging 15cm deep andgetting out in Hard/Dense soil, complete all as specified and directed. |
| 3 | Excavation in trenches n.exc 1.5m wide and n.exc 1.5m in depth for foundation, etc or for shafts, wells, cespits, manholes pier hold etc n.exc 10 Sqm on plan and n.exc 1.5m in depth and getting out in Hard/Dense soil, complete all as specified and directed. |
| 4 | Add toitem 2 above for each additional 1.5m or part thereof in depth beyond the first 1.5 m out in any type of soil complete all as specified and directed. |
| 5 | Returing, filling in trenches, incl spreading, levelling, watering and well ramming in layers not exc 25 Cm in hard/dense soil complete all as specified and directed. |
| 6 | Removing excavated material of any type of soil to a distance n exc 50m and deposited where directed at a level n exc 1.5m above the starting point complete all as specified and directed. |
| 7 | M&Lfor moorum / red bajri filling in floors or pavings, laid in layers nexc 15cm thick, spread, levelled and rammed including waterring and consolidation complete all as specified anddirected. |
| 8 | M&L for hardcore of gauge n exc. 63 mm,of broken stone deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface complete all as specified and directed. |
| 9 | M & L 25mm thick cement concrete type B-0, 1:2:4 (using 12.5 mm graded aggregate) for levelling course in floors complete all as specified anddirected. |
| 10 | M & L Treating the bottom and sides of excavation at the rate of 5 ltrs of emulsionper Square metre of surface area with ATT. |
| 11 | M & L Treating the back fill in contract with foundation @ 7.5 ltr of emulsion per Sqm of vertical surface area with ATT. |
| 12 | M & L Treating the top surface of the filled earth @ 5.00 ltr of emulsion per Sqm ofsurface area with ATT. |
| 13 | M & L Treating the soil under the plinth protection at the rate of 5 ltrs of emulsionper Square metre of surface area with ATT. |
| 14 | M&L for PCC 1:4:8 type D2, using 40mm graded stone aggregate, as in foundation filing,sub base of floor, etccomplete all as specified and directed |
| 15 | M & L high strength steel deformed TMT bars 10 mm dia and over, cut to length, bent to shape required including cranking, bending spirally and binding with and including mild steel wire (annealed) not less than 0.90 mm dia, etc complete all as specified and directed. |
| 16 | M&L for Mild steel bars (TMT bars)5mm dia and over upto and including 10mm dia in strriups,spaces,nibs and binders complete all as specified and directed. |
| 17 | M & L for use and waste of formwork to sides of concrete foundations, footings, bases of columns, raft andbeams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter finished fair complete all as specified and directed |
| 18 | M & L for use and waste of formwork to sides of pillars, posts, struts, piers, columns and stanchions finished fair complete all as specified anddirected |
| 19 | M & L for use and waste of formwork to sides and soffits of floor or roof beam, beam hauchings, bands, girders, bressummers, lintels, etc for fair finish surfacecs complete all as specified anddirected |
| 20 | M & L for use and waste of formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work, not exceeding 200mm thick (horizontal or sloping), etc For Fair Finish Surfacecomplete all as specified and directed. |
| 21 | M & L for use and waste of Timber Formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs n exc 20 cm wide and sides of RCC/PCC bands in walls, horizontal or sloping and similar work exc 10cm but n exc 20cm wide complete all as specified and directed. |
| 22 | M&L RCC M-25 (Design Mix) using 20 mm graded stone aggregate as in foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete complete all as specified anddirected |
| 23 | M&L RCC M-25 (Design Mix) using 20 mm graded stone aggregate as in Columns, pillars, piers, posts and struts complete all as specified anddirected. |
| 24 | M&L RCC M-25 (Nominal Mix) using 20 mm graded stone aggr as in beams, bands, cantilvers, bressummers, linters, chajjas, etc over 1.5m span etc complete all as specified anddirected |
| 25 | M&L RCC M-25 (design Mix) using 20 mm graded stone aggregate as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like, etc complete all as specified anddirected |
| 26 | M&L for brick work with sub class "B" bricks straight or curved on plan exc. 6.00m mean radius built in cement mortor 1:6., etc complete all as specified and directed. |
| 27 | M&L for rendering 10mm thick cement plaster in CM 1:6 onfair faces of brick work or concrete surfaces and surface finished even and smooth without using extra cement complete all as specified and directed. |
| 28 | M&L for rendering 15mm thick cement plaster in CM 1:4 on fair faces of brick or concrete surface with liquid water proofing compound @ 200 ml per bag finished even and fair without using extra cement complete all as specified anddirected.(Note:- Liquid water proofing compound to be measured paid separately) |
| 29 | M&L for rendering 5mm thick in ceiling CM 1:4 on fair faces of brick work or concrete surfaces finished even and smooth without using extra cement complete all as specified and directed. |
| 30 | M & L for rendering 10mm thick in cement mortar 1:3 mixed with integral water proofing compoundwhile concrete surface is green and finish the surface even and smooth without using extra cement all as specified and directed (WPC shall be measured and paid separately under respective item). |
| 31 | M & L for applying two coats of 1st Quality oil emulsion distember over new prepared surface of wall with putty complete all as specified and directed. Note:- Putty shall be measured and paid seperately under Srl Item No. 38) |
| 32 | M & L for preparation of newplasteredsurfaces of walls and applying two coat ofAcrylic Smooth exterior paint of required shade (@ 1.67 ltr/10 sqm) over over a coat of primer(@ 2.20 kg/10 sqm) same make base over a coat of puttyall as specified and directed.Note:- Putty shall be measured and paid seperately under Srl Item No. 38)Make Asian- Apex or Equivalent. |
| 33 | M&L for preparation of newly plaster surface of wall and and apply 2mm thick cement base wall care putty in two coat (each coat not less than 1mm) over a coat of primer on walls and surface finished even and smooth with sand paper completeall as specified and directed |
| 34 | Preparation of new plasteredsurfaces of wall and applying three coat of white washall as specified. |
| 35 | M & L for 75mm thick cement concrete 1:3:6 type C1, with using 20mm graded stone aggregateas in floor/ plinth protection finish the surface even and smooth with using extra cement including filling the expansion joints with bitumen filler / filler boards and necessary form work etc complete all as specified and as directed. |
| 36 | M & L for preparation of surfaces for applying bituminous primer (conforming to IS-3384-1965) @ 0.40 Kg/Sqm complete. |
| 37 | M & L for applying a tack coat of Industrial bitumen grade of 85/25 at the rate of 1.2 Kg per Sqm including cleaning surfaces (1st coat for bonding material below membrane and 2nd coat on top of membrane. Each coat would be paid seperately.) |
| 38 | M & L 3mm thick APP based polymeric membrane minimum weighing 3kg/sqm and reinforced with polyster non wove fabric (wt. not less than 150 gms/sqm)land on primed surface by forced application complete all as specified and directed.Note: Application of APP membrane must be done by authorised applicator of membrane manufacturer. |
| 39 | M&L for applying two coats of bitumen based aluminium painting @ 0.15 Kg / sqm each coat on water proofing treatment with preparation of surface as on non accessible area complete all as specified and directed. |
| 40 | Supply only Liquid Water proofing compound PIDIPROOF LW+ of Dr FIXIT or equivalent as approved. |
| 41 | M&L for scratch free vitrified ceramic tiles10mm thick (square or rectangular) area of each tile not exceeding 0.36 sqm ,in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed or bedding layerin CM 1:6 complete all as specified and as directed. |
| 42 | All as per item No 41above but as in skirting/ dado etc with and including 10mm thik backing coat in cement mortar 1:4 an wall complete all as specified and as directed. |
| 43 | S&F cement fibre Elegant Tile 595x595x5 mm with square edge density of 1050kg/m3 covered with absorptive microfiber coating on the front side and Acoustics fiber on the back side,water resistance, fire resistant absorption coefficient upto 0.89 at 160 Hz tested as per ISO 354. The tiles are anti-sag and installed on T24 grid system of 0.6mm thick Main "T" length minimum 3000mm, web minimum 35mm to be placed at 600mm center to center and secondary cross "T" of length 600mm web minimum 35mm inter locked, Wire Support for Main T to be taken at every 1200mm length wise and 600mm width wise, with a backing of 50mm 1000 GSM thick absorb wool tested as per ASTM C 518 test results (SC-6490)-0.03312 for excellent results complete all as specified and as directed |
| 44 | S&F Woodlot FR Grades of size 2430x131x16mm made of exterior grade HDF backed with acoustical having excellent noise absorption 0.88 NRC as per ISO 354. 15mm Aluminum profile conforms to Aluminum Alloy 6063-T 6.Temper as per BS: 1474 1987 and G.I Lock in clips on the back of tongue and Groove system. Density per panel is 750-800 kg/m3. The panels come with tongue & groove for seamless patterns, 4-28mm Groove and visible panel.The perpendicular holes are available on the back of panel which are covered by black acoustical fleece. Installed on G.I studs 600x600mm center to center 2400mm X 50mm web thickness 0.5mm, flanges 15 & 50mm fully knurled giving it high strength, hot dipped galvanized steel with 120GSM zinc coating with a backing of 50mm 1000 GSM thick absorb wool tested as per Fire Retardant IS 15061-2002 for excellent results.complete all as specified and as directed |
| 45 | S&F 12mm thick Frosted Toughned Glass fixed on patch hinges/pivot for smooth functioning in door shutter including stainless steel handle of 8 inches long and mortice locking arrangement complete all as specified and as directed |
| 46 | S&F in repair fabricating coloured powder coated aluminium frame work,door shutter ,windows , ventilators, partisions with one or more rebates sections of approved tint as required for partions including beading,cleat, screws,fasteners, plugs, for fixing with wall/ceiling columns/beams etc complete all as specified and directed. |
| 47 | S&F aluminium coloured power coated window and ventilator shutters, sliding type without sash bar alu section weighing 0.55 kg/m including necessary locking arrangement, guide wheels, joining cleats, glazing clips rubber packing anodised alu snap beading screws etc complete all as specified and directed. |
| 48 | S&F aluminium coloured power coated door shutters, aluminium section weighing min 0.55 Kg/m including necesssary joining cleats, glazing clips, rubber neoprene packing handles 2 Nos in each door, pad lock, hinges, anodised aluminium snap beading screws etc complete all as specified and directed. . |
| 49 | S&F 4.8 mm thick plain or tinted glass, ordinary quality including rubber gasket for packing and fixed to aluminium doors/window/partition incl necessary cutting / moulding and chamferrring of edges for service window/counters complete all as specified and directed. |
| 50 | S & F for galvanised Stainless steel wire cloth of0.36mm dia wire and average width of aperture 1.4mm & fixed with tacks of stainless steel wire staples,etc complete all as specified and as directed. |
| 51 | S&F aluminium (extructed section) Door closer hydraulically regulated, desingnatin No. 3, universal type, suitable for door shutter and fixed complete all as specified and directed. |
| 52 | S&F in repairsStain less steelbrackets for suitable 25mm dia curtain rods all as specified and directed complete . |
| 53 | S&F 25mm dia Stainless steel curton rod fixedcomplete all as specified and directed. |
| 54 | M&Lfor 18-20 mm thick Black granite slab of approved quality ofany sizebeddedand jointed in greycement slurry and pointed with white cement with admixture of pigment to match the shade of granite stonelaid over and including 15 mm thick screed bed in CM (1:4) including granite polish to be done by mechanical grinder and moulding edges complete allas specified anddirected. |
| 55 | M&L Pre-laminated particle board, Exterior grade 18/19mm thick, pre-laminated both side with decorative choice lamination and 3mm thick teak wood edging of all around all as specified and directed by Engr-in-charge. |
| 56 | S&F writing glass boardrectangular in shape of any colour ultramodern, tempered glass surface whiteboard delivers high quality performance. Both durable and magnetic, the white finish glass provides a smooth writing and display platform that erases cleanly after evry use to prevent ghosting and staining all as specifed and directed. |
| 57 | Providing and fixing factory made PVC Shelf / Partition of required size consisting of panel of 18mm thick Celuka PVC Ply and for supporting the hold of Shelf / Partition and shall provided 3 edges in size 18mm x 18mm as per required length. The front side of the edge visible in the front of the shelf / partition to be edge lipped by 18mm width x 1mm thick PVC sheet using solvent cement etc. complete as direction of Engineer-in-charge, manufacturer"s specification and drawing. |
| 58 | S&F 8 mm thick aluminium Deco Grill size of 75x75 mm fixed to window with aluminium flat 30x3 mm size all as specified and directed. |
| 59 | M&L for Damp proof course 40 mm thick in cement concrete 1:2:4, type B-0 to horizontal or vertical surfaces including necessary formwork complete all as specified and directed. |
| 60 | M&L for applying evenly a coat of blown type bitumen at the rate of 1.50 kg per square metre and blinding with clean dry sand @ 0.05 cu. m. per sq. m complete all as specified and directed. |
| 61 | M&L for Polythene film, 150 micron thick, laid on a coat of bitumen primer, @ 0.30 to 0.50 kg per sq. m complete all as specified and directed. |
| 62 | Surface dressingnot exceeding 15cm deep in soft and loose soil complete all as specified. |
| 63 | Removing excavated soilexc 0.50 Km but not exc 1.50 Km and depositing where directed |
| 64 | Excavation over areas n. exc.1.5m deep and getting outin hard/dense soil and getting out all as specified and directed |
| 65 | M&L walling of random rubble masonry un coursed well bonded and solidly hearted built in CM 1:6 complete all as specified. |
| 66 | S/F 110 mm dia PVC (SWR) pipes single socketed fixed in walls and floors or trenches etc. as in weep holes of retaining wall complete all as specified. |
| 67 | M&L PCC 1:2:4 type B-1 (using 20 mm graded stone aggregate) as in coping including formed work complete all as specified. |
| 68 | M&L cement mortar 1:4 raised pointing to randam or polygonal rubble uncoursed or brought upto courses complete all as specified. |
| 69 | M&L hand packing broken stone or boulders (any thickness) at back of walls over arches andraising (or lowering) to the required level complete all as specified |
| 70 | M&L extra over stone walling for hammer dressingto face stones and dressing of face beds and joints, as specified, of random rubble walling, uncoursed or brought upto courses complete all as specified with max depression on face 40 mm for lime/sand stone |
| 71 | Moorum/ red bajri filling under foundation or pavings laid in layers n.exc. 15cm thick spread, levelled, and rammed including watering all as specified and directed. |
| 72 | M & L for 100 mm thickcement concrete 1:4:8,type D2, with using 40 mm graded stone aggregate as in sub base to floors etc as specified and directed. |
| 73 | M & L for Chequered cement concrete tiles 20Cm x 20 Cm x 20mm thick over and including 15mm thickscreed bed in CM 1:6, set, jointed with grey cement and pigments and pointed in neat cement slurry in floors complete as directed and specified. |
| 74 | M & l forproviding cement concrete block masonry with solid blocks exc 10 cm in width in PCC 1:3:6 Type C1 (using 20 mm graded stone aggregate) and set in CM 1:6 complete all as specified and directed. |
| 75 | M & L for PCC 1:2:4 type B2 (using 40 mm graded aggregate) as in surface channels and drains complete all as specified and directed. |
| 76 | Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement including forms, moulds, mitred /stopped ends |
| 77 | M & L for 15 mm thick rendering on fair faces of brick work or concrete surfaces in CM 1:4 and finished even and smooth without using extra cement complete all as specified and directed |
| 78 | M&L for point wiring for one light/ bell/ fan point controlled by one, one way switch with 1.5 Sqmm size, PVC insulated and unsheathed 1100 volts grade, single core stranded (multistrand) copper conductor (FRLS)PVC cable drawn into & including medium grade PVC conduit (not less than 20mmouter dia) with all fittings and accessories fixed concealedandsunk cast iron or pressed steel terminal boxes for mounting fittings like switches, sockets & fan regulators etc with 3 mm thick plastic laminated sheet covers fixed with brass screws and cup washersincluding one continuous run of PVC insulated (green colour) 1.5 Sqmm multistrandedcopper conductor cable earth wire and connected to earth dolly complete all as specified and directed. |
| 79 | All as per item No 78 above but one socket outlet 5 pin 5/6 Amps onindependent board controlled by one, one way switch. |
| 80 | All as per item No 78 above but one socket outlet 5 pin 5/6 Amps onsame board with other one, one way switch. |
| 81 | All as per item No 78 above but for socket out let, 15/16 Amps on independent board with 4 Sqmm size cable and 4 Sqmm for continuty earth wire connected tocommon earth dolly all as specified and directed. |
| 82 | S&F switch pianoflush type 5/6 Amps single pole one way incl taking out old unsv switch all as specified & directed. Make :Anchor/legrand/HPL or equivalentas approved |
| 83 | S&F switch piano flush type 15/16 Amps single pole one way incl taking out old unsv switch all as specified & directed.Make : Anchor/legrand/HPL equivalentas approved |
| 84 | M&L socket out let5 pin 5/6 Amps incl taking out old unsv socket all as specified and directed. Make : Anchor/legrand/HPL equivalentas approved |
| 85 | S&F socket out let2-in-1, 6 pin 5/6 & 15/16 Amps incl taking out old unsv socket all as specified and directed. Make : Anchor/legrand/HPL equivalentas approved |
| 86 | S&F bell push, flush type 5 Amps white or ivory, ISI markedincl taking out old unsv bell push all as specified and directed.Make : Anchor/legrand/HPL equivalentas approved |
| 87 | S&F of call bellDing Dong230V, AC, single phaseISI marked incl taking out old unsv call bell all as specified and directed.Make : Anchor/legrand/HPL |
| 88 | S&F in replacement ceiling rose 3 terminals 65x25 mm diapoly carbonate isolated incl taking out old unsv ceiling rose all as specified and directed. Make :SSK/Cona/Anchor equivalentas approved |
| 89 | S&F in replacement dimmer type electronic fan regulator flush incl taking out old unsv dimmer all as specified and directed Make : Anchor/legrand/HPL equivalentas approved |
| 90 | S&F LED lights fitting 1x 18W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core 23/0.0076 flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed. |
| 91 | S&F LED luminaire 600 mm x 600 mm, 35/36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete all as specified and directed.Make: Philips/Bajaj/wipro |
| 92 | Supply and fix ofDB, TPN 4 way vertical typewith single/three phase outgoing with provision for MCCB as incomer 415 volt with 200 amps rated bus bar all as specified and directed Make:-Legrand/Schneider/HPL |
| 93 | Supply and fixMCB 6-32 amps, 10 KA,SP 240 volt, "B" series all as specified and directedMake:-Legrand/Schneider/ HPL |
| 94 | S&F 63 Amp MCB TPN with thermal over load as well as magnetic short circuit tripping device with quick, break trip free mechanism, robust design and terminals having heat resistance moulding complete all as specified and directed. |
| 95 | S&F ceiling fan 1200 mm sweep complete with blades, down rods, electronic regulator and accessories, 230 V, Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) complete all as specified and directed. |
| 96 | S&F building security light fitting complete with 35 watt LED type IP 66 pressure die cast aluminium housing and heat resistance toughened glass with frame protection and better optics for uniform distribution etc including GI pipe (light grade) mounting bracket of size 32 mm dia and 1.20 m long fixed to wall with and including nut, bolts and GI clamps of size 50 x 6 mm as required complete with twin core copper conductor cable 1.5 sqmm from ceiling rose to fittings complete all as specified. |
| 97 | S&F single pole and neutral enclosure with a two pin and earth plug and socket with 20 amps MCB "C" series complete all as specified and as directed. |
| 98 | S&F LED bulkhead light fitting 10W luminaires including LED driver holder connceting up with three core flexible copper conductor cable sutaible size completeall as specified and directed. |
| 99 | M&L of earthing complete with galvanished steel earth plate electrode size 600X600X6mm thickburried directly in ground vertically to a depth not less than 2.25m below normal ground level with top edge of earth plate not less than 1.5m below normal ground level connected to and incl GI earth lead wire4mm diaby means of bolts ,nuts, check nuts & washers ofgalvanised iron and connected to test point all asshown in electrical plate No 3 of SSR part I-2009 and as specified or indicated and testing on completion incl excavation and earth work in any type of strata available at site ,PCC (1:3:6)type C-1 earthing chamber ,pre cast RCC slab 50 mm thick in cement concrete (1:2:4) type B-1 using 20 mm gradedstone aggregatereinforced with welded steel wire fabric (XPM) weight not less than 4 kg/sqm funnel with GI watering pipe of 20 mm bore medium grade ,wire mesh and lugs ,GIprotection pipe of 15 mm bore light grade up to 7.5 mtr long ,etc complete all as specified and directed. |
| 100 | M&Llocal sand dry, filling in trenches around under ground cable complete all as specified and directed. |
| 101 | M&L for providing of new sub class "B" bricks, old size, well burnt laid flat dry for protection of under ground cable complete all as specified and directed. |
| 102 | Supplyand fix in replacement, laying & testing of cable XLPE insulated screened PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 volts grade withstranded aluminum conductor of size 120 sqmm 3.5 core all as per IS , specified & directed. |
| 103 | S&F 20 mm bore GI water tubing medium gradeISI marked with all fittings and accessories laid in trenches/ wall/grounds/floorsrequired for completion of work. |
| 104 | Supply and fixing Gun metal gate valve/glove valve ISI marked with Iron wheel head screwed both end for GI tubing of size 20 mm dia |
| 105 | Cutting Existing Steel tubing in position without taking down for branch connection from pipe size 50 mm dia |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
