Uttar Pradesh Power Transmission Corporation Limited-UPPTCL has published Tender For For The Construction Of Sand Pits And Fire Bucket Stand At 400Kv Gis Substation Agra South Agra Under E400kv Substation Division Agra South. Submission Date for this Tender is 21-05-2024. Fire Fighting Consumable Tenders in Agra Uttar Pradesh. Bidders can get complete Tender details and download the document.
| FileName | File Description | File Size |
| 717b4b13-e335-4eb8-86ee-1787edfcf122.html | Tender Notice | 0 KB |
| BOQ_1596549.xls | Tender Document | 0 KB |
| Tendernotice_1.pdf | Tender Document | 0 KB |
| Sl. No. | Item Description |
| 1 | Construction of sand pits size 3.5x2.5x0.5 mtr., the work including leveling and dressing,making proper slopes including cutting and filling of earth. Then construction of sand pits of above size including brick work in 1:4 ratio of cement and course sand and then out side and inside plaster in 1:4 ratio of cement and course sand if so required including all labour T&P etc required for proper completion of the work. |
| 2 | Fillling of Fine sand in the pits as per site condition of switchyard of 400kV GIS Substation Agra South and removal of extra material from the pits |
| 3 | Fabrication of Fire Bucket stand made of M.S. Angle 50x50x6mm of size 6"x5"x3" with bucket hanging arrangement of 08 nos. sand buckets. Fabrication of canopy of 18 SWG MS sheet for protecting it from rain. The base will be 0.6 Mtr. wide including painting of one coat red oxide primer paint and two coats of good quality Burger/Asian/Nerolec make red enamel paint. |
| 4 | Fabrication of Sand Buckets: Mild Steel Sheets used for the manufacture of fire buckets. The bottom shall be dished and shall be joined to the body by butt welding so that there is no raw edge or crevice on the inside of the bucket. The thickness of the bottom sheet shall be 1 mm. The ears shall be made of mild steel sheet and shall be fitted to the body at the top by means of welding with the flat head on the side. The thickness of sheet for ears shall be 2•8 mm. The top handle shall be of mild steel rod of 10 mm in diameter with its ends bent up. The bottom ‘handle shall be of mild steel rod of 10 mm in diameter and it shall be joined to the bottom by welding. Outside of the fire bucket shall be painted with primer and fire red colour. The word fire shall be written outside the bucket in highly visible black colour the inside of the fire bucket shall be painted with primer and white. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
