Military Engineer Services-MES has published Tender For Repairs To Joinery, Brick Work, Roof Sheets, False Ceiling And Other Misc Works At Hema Line, Thimaya Line, Robert Barrack, Mes Colony And Other Locations Under Age B/R-V Of Ge (Mcte) Mhow. Submission Date for this Tender is 29-05-2024. Barrack Tenders in Indore Madhya Pradesh. Bidders can get complete Tender details and download the document.
| FileName | File Description | File Size |
| 4c561536-37a3-4ea8-ad68-04c4484b163a.html | Tender Notice | 0 KB |
| BOQ_730908.xls | Tender Document | 0 KB |
| Make10T.pdf | Tender Document | 0 KB |
| PS-10T.pdf | Tender Document | 0 KB |
| TD10T.pdf | Tender Document | 0 KB |
| Tendernotice_1.pdf | Tender Document | 0 KB |
| Sl. No. | Item Description |
| 1 | Dismantling of Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings |
| 2 | S & F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws as specified and as directed. |
| 3 | S&F Plain, galvanised, mild steel sheeting thickness 0.63mm , in ridges, hips, valley gutters, drip and straight flashings (length and girth as fixed) with grade of zinc coating 275 |
| 4 | Dismantling of timber scantling as fillets, rails, posts, rafters, purlins, any section & any description complete all as specified and as directed. |
| 5 | S&F Steel work in tubular trusses, purlins etc including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161- 1979 grade St.-240etc complete all as specified and as directed. |
| 6 | M&L for preparation of new steel surfaces of any description ,over 10 cm width or girth and applying two coats of synthetic enamelled paint over a coat of red oxide primer complete all as specified and directed. |
| 7 | Dismantling/ wall and ceiling boards (fibre pulp, insulation etc) or insulation boards/ slabs |
| 8 | Providing and fixing in true horizontal level 600mm x 600mm, false ceiling system hot dipped galvanised steel section, exposed surface with pre-coated capping, main tee of size 24 x 38mm, having 0.25mm gauge at every 1200mm centre to centre maximum and rotary stitched cross tee of size 24 x 38mm having 0.25mm gauge at every 600mm c/c and sub cross tee of size 24 x 38mm, having 0.25 mm gauge at 1200mm c/c and wall angle of size 19 x 19mm, having 0.35mm gauge fixed to the periphery of the wall. The abovegrid is suspended at every 1200mm c/c in both directions using 3.0mm thick pre-straightened GI wire. including 595 x 595 x 6mm thick E-Board Designer ceiling fixing 600mm x 60mm x 6mm grid( Frame work) etc all as specified as directed. |
| 9 | Taking down cement or cement lime plaster of any description including racking out joints, hacking for keys, scrubbing down with water etc, complete all as specified and directed. |
| 10 | M&L for Rendering 15mm thick on fair faces of concrete/ brick interior surfaces in cement mortar 1:6 as per manufacturer"s instruction, finished fair and even without using extracement complete all as specified and directed. |
| 11 | M&L for Rendering 15mm thick on fair faces of brick work or concrete exterior surfaces in cement mortar 1:4 and finished even and smooth without using extra cement including mixing of water proofing compound wherever required. |
| 12 | M&L for Rendering 10 mm thick on fair faces of brick work or concrete surfaces of ceiling, chajja in CM 1:3 surface finished even and smooth without using extra cement complete all as specified and directed. |
| 13 | M&L for preparation of new surfaces pf plastered of walls and applying Two coat of distemper oil emulsion incl priming the surface and incl one coat of birla white wall putty all as directed by Engr-in-Charge . |
| 14 | M&L for preparing new surfaces of walls and applying two coat of cement based paint complete all as specified and as directed. (Note : Rate shall be included for necessary scaffolding and safety measures where required at site ) |
| 15 | M&L for preparation of newly plastered surface and applying three coats of white wash on ceiling complete all as specified and as directed. |
| 16 | M&L for preparation of old plaster surfaces of ceiling and applying one coat of white wash all as directed by Engr-in-Charge. |
| 17 | M&L preparation of old plaster surfaces of ceiling and applying one coat of distemper all as directed by Engr-in-Charge . |
| 18 | M&L for applying one coat of synthetic enamel paint on old wooden surfaces of any description, not otherwise, described, over 10cm width or girth including preparation of old painted surface. |
| 19 | M&L for applying one coat of synthetic enamel paint on old steel & iron surfaces of any description, not otherwise, described, over 10cm width or girth including preparation of old painted surface. |
| 20 | Preparing old painted surfaces by washing, rubbing down and stopping of distempered and painted surfaces and applying a coat of distemper oil emulsion on surfaces of walls upto any height. (Note : Rate shall be included for necessary scaffolding and safety measures where required at site) |
| 21 | M&L for preparation of surfaces and applying one coat Acrylic emulsion with roller on old treated surfaces of wall etc complete all as specified and directed (Note:- Contractor shall furnish gaurantee of four year against service rendered) (Note:- primer and emulsion paint shall be carried out through air less spray machine (Mechanical means). |
| 22 | M&L for complete removal of existing treament and preparation of surfaces and applying two coat Acrylic emulsion with roller over applying minimum 1mm thick birla white wall care putty over prepared surface to achive the surface even and smooth for painting complete all as specified and directed (Note:- Contractor shall furnish gaurantee of four year against service rendered) (Note:- primer and emulsion paint shall be carried out through air less spray machine (Mechanical means). |
| 23 | M&L for complete removal of existing treament and preparation of wall, washing, scrubbing down and stopping old treatment and painted surface of plastered / decorated surface and applyingtwo coat of Premium Acrylic smooth exterior paint and including priming coat of exterior primer and incl one coat of birla white wall care putty complete all a specified and as directed. (Note : painting will be done by brush / spray / roller of building upto the height G+3) all as per directed by Engr -in-Charge) (Note : Rate shall be included for necessary scaffolding and safety measures where required at site) |
| 24 | M&L for preparation of old surface of wall, washing, scrubbing down and stopping old treatment and painted surface of plastered/ decorated surface and applyingone coat of Premium Acrylic smooth exterior paint complete all a specified and as directed. (Note : painting will be done by brush/ spray/ roller of building upto the height G+3) all as per directed by Engr -in-Charge) (Note : Rate shall be included for necessary scaffolding and safety measures where required at site) |
| 25 | M&L for preparation of old plaster surfaces of wall and applying one coat of white wash all as directed by Engr-in-Charge. |
| 26 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing debrish and rubbish off the premises and stacking serviceable tiles. |
| 27 | M&L for Vitrified Ceramic tiles 10mm thick light shade (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15mm thick screed bed in CM 1:6 |
| 28 | All as per item No 27 but on verticalsurfaces such as skirting incl including 10mm thick rendering in cement mortar 1:4 rough finish to receive the tiles complete all as specified and directed. |
| 29 | M&L for non skid ceramic coloured tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm , in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15 mm thick screed bed in CM 1:6 |
| 30 | All as per item No 29 but on verticalsurfaces such as skirting incl including 10mm thick rendering in cement mortar 1:4 rough finish to receive the tiles complete all as specified and directed. |
| 31 | M&L for non skid ceramic coloured tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.09 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15mm thick screed bed in CM 1:6 |
| 32 | All as per item No 31 but on vertical surfaces such as skirting incl including 10mm thick rendering in cement mortar 1:4 rough finish to receive the tiles complete all as specified and directed. |
| 33 | M&L for glazed coloured ceramic tiles, first quality (or approved class, colour and design/shade) of300 x 200 x 7mm thick in vertical surfaces, as in dado/skirting etc set & jointed in neat cement slurry & pointed in coloured cement to match with coloured tiles, over and including 10mm thick rendering in cement mortar 1:4 rough finish to receive the tiles complete all as specified and directed. |
| 34 | M&L for glazed coloured ceramic tiles, first quality (or approved class, colour and design/shade) of300 x 450 x 7mm/ 300 x 600 x 7mm thick in vertical surfaces, as in dado/skirting etc set & jointed in neat cement slurry & pointed in coloured cement to match with coloured tiles, over and including 10mm thick rendering in cement mortar 1:4 rough finish to receive the tiles complete all as specified and directed. |
| 35 | Demolition of stone slabs of any description or thickness in floors/ walls laid bedded and pointed in any mortar etc. complete removal of debris outside MD land. |
| 36 | M & L for Machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete including 15mm thick screed bed in CM 1:6 |
| 37 | All as per item No.36 but on verticalsurfaces such as skirting incl including 10mm thick rendering in cement mortar 1:4 rough finish to receive the tiles complete all as specified and directed. |
| 38 | M&L for 16 to 18mm thick Granite (of any type) work (table rubbed and polished and exposed visible edge moulding/ rounding) in steps, jambs, pillars, window cills, cooking platforms and like in 15mm thick cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite. |
| 39 | Demolition of un-reinforced Cement Concrete of any description and in any position not otherwise specifically provided for, separation of serviceable materials from the unserviceable, stacking the serviceable materials within 100 M and disposal of unserviceable materials, debris and rubbish to a distance not exceeding 100 M as directed by the Engineer in Charge. |
| 40 | M &L for Cement concrete type B2, 1:4:8 (using 40mm graded stone aggregate) in foundation filling and mass concrete complete all as specified and as directed. |
| 41 | M & L for coloured Rubber Moulded Chequered Cement Concrete tiles 300 x 300 x 30mm thick, setjointed and pointed in neat cement slurry in floors with grey cement and pigment over and including 15mm thick screed bed in CM 1:6 |
| 42 | M&L for Providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 40mm thick compacted bed of sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand. |
| 43 | M&L for providing Precast cement concrete in type B-1, 1:2:4 (20mm graded aggregate) in Kerbs and edging to road , divider and foothpath etc incl necessary earthwork with plain fair faces, incl chamfered whethereing, throating etc and setting in cement mortar 1:4 complete with joints to match. |
| 44 | M&L for PCC 75mm thick type B2 (1:2:4) using 40 mm graded stone aggregate) in plinth protection, joints should be filled with bitumen primer etc, complete all as specified and as directed. |
| 45 | M&L for preparation of new concrete surface of any description over 10cm girth or width, not otherwise described and applying two coats of synthetic enamel paint compete all as spcified and directed. |
| 46 | S&F in repair Stainless steel curtain rod/ rail25mm dia medium weight with premium quality incl SS brackets with decorative caps as approved by Engr-in-Charge complete all as specified & directed. |
| 47 | S & Fixed in repair Vitreous china, wash down water closet pan (pedestal pattern), white, including plastic water closet seat cover, closed pattern with flat bottom,connection to drain (or outgoing pipe) and to flushing pipe, antisiphonage pipe etc, complete. |
| 48 | S&F in repair vitreous china squatting pan (orissa pattern) size 580mm x 440mm, white with integral foot rest, any pattern including provision of cement concrete bedding (excluding fulshing cistern and flush pipe) with S or P trap, Fixed in repairs, complete all as specified and directed |
| 49 | S&F in repairs low level Flushing cistern 10 ltr capacity, PVC valveless syphonic action type, white with inlet, ball valve, float valve and handle, flush pipe, incl brackets and flushing pipe fixed in repairs complete all as specified and directed |
| 50 | S&F in repairs vitreous china,white, wash hand basin, flat back size 550 x 400mm "including MS brackets including cutting for and pinning in, including waste pipe complete all as specified and directed |
| 51 | S&F in repair 600 x 450mm size and 5.5mm thick looking mirror, bevelled edge of selected quality glass with aluminium frame made of channel alround,mounted on 6mm thick commercial ply or AC building board, fitted to wooden plug with CP screws.complete all as specified and directed |
| 52 | S&F in repair chromium plated brass wall mixer 3-in-1 fancy type with provison for both hand shower and overhead shower complete with wall flange (without hand &over head Shower screwd down for15 mm GI bore pipe complete all as specifed and directed |
| 53 | S&F in repair chromium plated brass Central hole basinmixer without popup waste system complete screwd down for15 mm GI bore pipe complete all as specifed and directed |
| 54 | S&F in repair 20mm dia brass chromium plated tubular towel rails,D type,60cm long between flanges,complete all as specified. |
| 55 | S&F in repairs Health Faucet ABS with Rubbit Cleaning System, 1.25 m Long PVC Flexible Tube & ABS Wall Hook . |
| 56 | S&F in repair 110mm dia Cast iron nahani trap with CP grating including including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4)complete all as specified and directed |
| 57 | S&F in repair stainless steel kitchen plate rack size 600 x 900 x150 mm of approved patternmade out of stainless steel sheet 0.63 mm thick sheet with round 8mm dia rods including hangine arrangements complete all as specified and as directed. |
| 58 | S&F in repair 15mm size PVC connections internally threaded with PVC washer, PTMT nuts of length 450mm complete all as specified and directed. |
| 59 | S&F Grating 100mm dia of CP with or without hole complete all as specified and directed. |
| 60 | S&F in repair 15mm dia bib tap long body cast copper alloy (fancy type), chromium plated, with crutch or butterfly handle, screwed down for iron pipe or for brass ferrule complete all as directed. |
| 61 | S&F in repair 125mm size Brass Chromium plated shower roses with or without swivel joints, any size, including fixing to steel pipe or union complete all as specifed and directed. |
| 62 | S&F in repair 15mm dia brass chromium plated pillar tap, fancy type with or without lettered "Hot" or "Cold" ,with long screwed shanks and fly nut, capstan head, screwed for 15mm dia pipe complete all as directed. |
| 63 | S&F in repairs 15mm dia bore fancy type chromium plated swan neck pillar tap, cast copper alloy, with capstan heads,screwed down high pressure with long screwed shanks and fly-nuts, screwed for iron pipe and fixed, complete all as specified and directed. |
| 64 | S&F in repairs of waste couplingof any size and dia forstainless steel sink with drain board or without drain board. |
| 65 | S&F in repair heavy duty wall mixer legs, brass elbow,brass socket ,short pices, for pillar cock, CP stop cock, CP bib cock, concealed stop cock, wall mixer, sink mixer in any size etc complete all as specified and directed. |
| 66 | S&F, in repair brass spindles, heavy duty, for pillar cock, CP stop cock, CP bib cock, concealed stop cock, wall mixer, sink mixer in any size etc complete all as specified and directed. |
| 67 | S&F, in repair brass concealed spindles, heavy duty, for pillar cock, CP stop cock, CP bib cock, concealed stop cock, wall mixer, sink mixer in any size etc complete all as specified and directed. |
| 68 | S&F, in repair brass mixer spindles, heavy duty, for pillar cock, CP stop cock, CP bib cock, concealed stop cock, wall mixer, sink mixer in any size etc complete all as specified and directed. |
| 69 | S&F in repairs plastic water closet seat cover, white, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminized hinge device |
| 70 | S&F in repair CP paper holder fixed with screws complete all as specified and as directed. |
| 71 | S&F in repairs PVC syphon kit (any type/ any pattern) suitable for 10 ltrs capacity "Slimline" low level flushing cistern and make functional complete all as specified and directed by Engineer-in-Charge. |
| 72 | S&F in repair jet spray for pedestal pattern water closet complete all as specified and as directed. |
| 73 | M&L for in repair 12mm thick plywood, commercial quality, BWR grade, type BB, 5 ply, fixed with screws to timber frame work complete all as specified and directed. |
| 74 | S&F, in repair mild steel helical door spring 300mm long stove enamelled black incl roller and roller plate complete fixed with screws to wooden frames or with welding to steel frames complete all as specified and directed. |
| 75 | S&F in repairs Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with CP bracket guard & railing 60cm long complete all as directed. |
| 76 | S&F in repair sinks with drainage board made of stainless steel 1 mm thick kitchen or laboratory with all plugs, washers, fittingsand wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm, complete all as specifed and directed. |
| 77 | Taking up or down 15mm bore steel tubing and connections, including cleaning for re fixing complete all as specifed and directed |
| 78 | S&F, laying and testing for 15 mm bore GI tubing medium grade galvanised steel tubing including all fittings such as union, reducer, sockets, reducing bends elbows tee, checknuts, caps, plugs etc fixed to wall and ceilling or laid in floors complete all as specifed and directed. |
| 79 | Taking up or down 20mm bore steel tubing and connections, including cleaning for re fixing complete all as specifed and directed |
| 80 | S & F 20mm bore Galvanized Steel tubes, medium grade for flush pipes, water supply pipes etc., fixed to walls and ceilings or laid in floors. |
| 81 | S & F in repairs Stop/angle cock 15mm bore cast copper fancy type chromium plated alloy screwed down high pressure with crutch or butter fly handle serwed both ends for iron pipe or for unions. |
| 82 | S & F in repairs two way Stop/ angle cock 15mm bore cast copper fancy type chromium plated alloy screwed down high pressure with crutch or butter fly handle serwed both ends for iron pipe or for unions. |
| 83 | S & F in reparis Stainless Steel Wall Mount Case with Soap Holder & Bruch Holder fixed to wall all as specified and directed by Engr-in-Charge. |
| 84 | S & F in repairs Hand shower 1.5 m CP Flexible SS Tube, 5 flow Hand Shower, adjustable wall hook, rubbit cleaning system all as specified and directed. |
| 85 | S & F in reparis Flexible waste pipe for wash hand basin fittled to Wash Hand Basin incl all necessary brackets etc all as specifed and directed by Engr-in-Charge. |
| 86 | S & F in repairs 32/40 mm PVC downpipe for kitchen sink fittled to Kitchen Sink incl all necessary brackets etc all as specifed and directed by Engr-in-Charge. |
| 87 | S& F in repairs Flush Pipe of polyethylene of low or high density or PVC, 32mm dia, for low level cistern |
| 88 | S & F in repairs Corner Glass Shelf of Size 320 x 320 mm with Silver chromium finished border Oval Rangepremium quality all as specifed and directed by Engr-in-Charge . |
| 89 | Hacking out old broken glass (any thickness, size, quality or description) from metal frame incl punching or drilling out old glazing pins/spring clips and providing and fixing new ones. |
| 90 | M&L for 4mm thick sheet glass, ordinary quality and glazing with oil putty and fitted in wooden/ steel window in square n exc 0.5 Sqm in each pane. |
| 91 | M&L for 4mm thick sheet figured glass, pin headed type and glazing with oil putty in square n exc 0.5 Sqm in each pane. |
| 92 | S&F in repairs Galvanised mild steel wire cloth, 0.63mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks, or galvanised wire staples |
| 93 | M & L in fixed in repairs 18/19mm thick Prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work |
| 94 | S&F in repair PVC water tank covers premium quality fitted to tank. Make : Syntex or equivalent water tanks of Cap 500 ltrs to 1000 ltr complete all as specified and directed. |
| 95 | S&F in repair 1000 litres capacity Rotational moulded polyethylene water storage tanks (Cylindrical vertical with closed top) hoisted and fixed in position including removing the existing water tank all as specified in SSR Part-I |
| 96 | S&F in repair 500ltr capacity rotational moulded polythyiene water storages tanks (cylindrical vartical with closed top) hoisted and fixed in position including removing the existing water tankall as specified in SSR Part-I (complete all as specified and as directed). |
| 97 | Dismantling wrought iron or mild steel work of any description not otherwise provided for |
| 98 | M&L for Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 |
| 99 | Taking down chowkats or frame of any description exc 1.5 Sqm each and n.exc 4Sqm (without taking off shutters from the frames) & remove off the premises complete all as specified and directed. |
| 100 | Taking down Shutters of any description exc 1 sqmbut n. exc 2 sq. m each of any description complete all as specified and directed. |
| 101 | Taking down chowkats or frame of any description n.exc. 1.5 Sqm each (without taking off shutters from the frames) & remove off the premises complete all as specified and directed. |
| 102 | Taking down Shutters of any description n. exc 1 sq. m each of any description complete all as specified and directed. |
| 103 | S&F Pressed steel door frame for single door, size 105 x 60 x 1.25mm thick with one rebates incl necessary fixing lugs, hinges, lock strike plate, holdfast (size 25mm x 3mm) of length 30 cm) etc., including Cutting holes in brick walls built in cement mortor for inserting holdfasts and making good dismantled portion in cement mortor 1:3 or cement concrete 1:2:4 Type B-1, depth of embedded portion of holdfasts exc. Half brick but not exc. One brick from the face of the jamb intl the wall complete all as specified and as directed. |
| 104 | S&F Pressed steel door frame for single door, size 165 x 60 x 1.25mm with one rebates incl necessary fixing lugs, hinges, lock strike plate, holdfasts (size 25mm x 3mm) of length 30 cm) etc., including Cutting holes in brick walls built in cement mortor for inserting holdfasts and making good dismantled portion in cement mortor 1:3 or cement concrete 1:2:4 Type B-1 , depth of embedded portion of holdfasts exc. Half brick but not exc. One brick from the face of the jamb intl the wall complete all as specified and as directed.complete all as specified and as directed. |
| 105 | M & L for PCC 1:2:4 type B0 (12.5mm graded) aggregate for filling in pressed steel door framed. |
| 106 | S & F Second class hard wood plain, solid, straight chowkats and frames, wrought, framed, rebated on the solid, rounded or chamfered, put together with glue pinned at joints. |
| 107 | S & F 35mm thick second class hardwood rail and style, Plain, framed, panelled shutters Plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated |
| 108 | S&F Solid PVC door frame of size 50mm 47mm made out of 5mm plain colour PVC sheet rinforced with MS Square tube suppling and fixing in opening as per specification and drawing on SSR Part-II. |
| 109 | S&F Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S tubes for top & bottom rails.M.S frame shall be covered with heat moulded plain colour PVC "C" channel having a PVC sheet strip if 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bootom rail on either side & as gap insert for top rail and bottom rail ; Panelling of plain colour PVC sheet to be fitted in the MS frame welded / sealed to the stiles. & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling and fixing in the frame at site as per specification & drawing on SSR Part-II. |
| 110 | S&F 35mm thick Flush shutters, solid core construction, with block board core & plywood face panels, commercial type on both sides complete all as specified and directed. |
| 111 | S & F 30mm thick 2nd class hard wood glazed and skeleton shutters open rebated and prepared to receive glass gauge etc with cut and mitred beads for securing glass etc sizeof member of shutter as specified in SSR Pt-1 section 8 and clause 8.24 (a) |
| 112 | S & F 35mm thick 2nd class hard wood glazed and skeleton shutters open rebated and prepared to receive glass gauge etc with cut and mitred beads for securing glass etc sizeof member of shutter as specified in SSR Pt-1 section 8 and clause 8.24 (a) |
| 113 | S & F Powder coated Aluminium ventilator, fixed type without sash bar, aluminum section weighing 0.55 Kg/ RM including necessary joining cleats, glazing clips, rubber packing, anodised aluminum snap beading, screws etc. including 50% of bottom portion is fixed with & incl 4mm pin headed glass and balance 50% of top portion is fixed with 4mm thick pin headed glass louvers and cover with 0.36mm dia stainless steel wire mesh at top portion complete all as specified. |
| 114 | M&L for Framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 |
| 115 | S&F 150mm size aluminium, anodised barrel tower bolt of extruded section. |
| 116 | S&F 125mm size aluminium, anodised barrel tower bolt of extruded section. |
| 117 | S&F 300mm length, aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy. |
| 118 | S&F120mm size, butt hinges, heady weight, cold rolled mild steel. |
| 119 | S&F100mm size, butt hinges, medium weight, cold rolled mild steel. |
| 120 | S&F 150mm size extruded aluminium alloy handles, fabricated type. |
| 121 | S&F 125mm size extruded aluminium alloy handles, fabricated type. |
| 122 | M&L for Preparation of new wooden surfaces over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer all as specifed and directed. |
| 123 | Demolition of brick work or stone/ boulder masonry, built in cement mortar including all quoins, pillars etc., separation of serviceable materials from the unserviceable, stacking the serviceable materials within 100 M and disposal of unserviceable materials, debris and rubbish to a distance not exceeding 100 M as directed by the Engineer in Charge. |
| 124 | M&L for Brick work with flyash bricks, straight or curved on plan exceeding 6 M mean radius built in cement mortar 1:4 using flyash bricks, complete all as specified |
| 125 | Disconnecting existing tanks (exc 500 but n. exc 1000 ltrs capacity), setting aside (or lowering if required) for Cleaning and removing all scale and dirt, etc, from tanks. The complete tank be scrub to remove dirt, sediments, fungus & stains . The vacuumed tank is disinfected with anti-bacterial spray or liquid bleach. Tank is filled with water that is made to run through the taps to disinfect the water pipes , etc. and hoisting if required reconnecting and re-fixing in the same positiondate of cleaning should be write by erasing the previous date of cleaning with paint and further writing the current date of cleaning.Note. (i) cleaning shall be the responsibility of the contractor for the entore period of contract. |
| 126 | Disconnecting existing tanks (exc 250 but n. exc 500 ltrs capacity), setting aside (or lowering if required) for Cleaning and removing all scale and dirt, etc, from tanks. The complete tank be scrub to remove dirt, sediments, fungus & stains . The vacuumed tank is disinfected with anti-bacterial spray or liquid bleach. Tank is filled with water that is made to run through the taps to disinfect the water pipes , etc. and hoisting if required reconnecting and re-fixing in the same position incl writing the date of cleaning should be write by erasing the previous date of cleaning with paint and further writing the current date of cleaning.Note. (i) cleaning shall be the responsibility of the contractor for the entire period of contract. |
| 127 | S&F, solid PVC wall panelling consisting of 5mm thick wood grain painted PVC sheet fillet of wight 35mm inclusive of solvent cement and fixing at site on PVC frame complete all as specified and directed. |
| 128 | Material & Labour for providing and fixing stainless steel (Grade 304) railing made of hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangement.. (Incl: Cutting,welding,drilling holes in existing floor and welding ends on existing RCC columns.) |
| 129 | S&F in repair Retro reflective sign baord out of ACP sheets of 4mm thick, back ground should be any colour and writing materials should be in white or any colours as approved, including lettering of any size, colour and numbers as approved including welding or reveting with frameetc complete all as specified and directed. |
| 130 | Taking down existing waterproofing treatment of tar felt of any description from roof surfaces and removing rubbilsh to a distance not exc 100m complete all as specified and directed |
| 131 | Disconnecting existing tanks, setting aside for carrying water proofing treatment, reconnecting & refixing in positioncapacity exc 500 ltrs but not exc 1000 litres as directed by Engineer-in-Charge. |
| 132 | M&L for 10mm thick screed bed on concrete surfaces in CM(1:3) finished even and smooth without using extra cement complete. |
| 133 | M&L for PCC 25mm thick (1:2:4) type Bo using 12mm graded stone aggregates mixed with integral waterproofing chemical PIDI PROOF-LW mixed in proportion of 200ML/ 50Kg cement of approved make in proportion 200ML/ 50Kg cement as in padding on roof surfaces for correcting/ making proper slope on roof/ chajja and roof kerbs/ benching complete all as specified and directed. |
| 134 | Supply & providing & testing water proofing roof treatment with polymeric standard water proofing membrane, Aquaflex manufactured by M/s Bengal Bitumen, MULTIPLAS STANDARD, manufactured by STP TEXAS Ltd/ Hyperplas manufactured by IWL Ltd or equivalant approved having 10 years gaurantee for water tightness complete all as specified and described as under:- (a)Preparation of RCC roof surface andcleaning surface all as per manufaturer"s specification complete all as specified and directed. (b)Supply & providing water proofing with 3mm thick APP polymeric proofing membran of 3Kg/Sqm HYPERPLAS STANDARD/ MULTIPLAS STANDARD consisting of 100micron HMHDPE film centre core including coating the surface with compatible primer and torch application of membrane with 10cm overlaps as required thereof, complete all as specified and directed(c)Aluminium bituminous paint @1.10 Kg/Sqm shall be applied over the APP membrane surface. NOTE:- The work of water proofing treatment shall be got executed through expert team of manufacturers or authorised applicator of manufacturer. |
| 135 | M&L for water proofing treatment to sunken surfaces of the slab in following sequences including 10 year gaurantee & testing for water tightness:- |
| 136 | (a)Slope correction by using M-20 (Nominal Mix) concrete minimum 25mm thickness at one end and a slope of 1:20 by using 12.5mm graded stone aggregate with integral water proofing Chemical PIDI PROOF-LW mixed in proporation 200ml/ 50 Kg cement of approved make in proporation 200ml / 50 Kg cement or equivalentas per manufacturer instructions complete. |
| 137 | (b)PCC padding with cement concrete 1:1.5: 3 type A 0 (using 12.5mm graded stone aggregate) 25mm thick with integral water proofing compound of approved make . |
| 138 | (c)Vertical sides plastered in CM 1:3, 15mm thick with WPC and 72 hours testing for water tightness by ponding of water complete. |
| 139 | (d)Application of two coats waterproof black of approved make as per manufacturer instructions all over and testing again for water tightness by ponding of water for 72 hours complete. |
| 140 | S&F in repair 15mm bore PVC bib taps complete all as specified and directed. |
| 141 | S&F in repair rubber or PVC door seal 900mm long complete all as specified and directed. |
| 142 | S&F in repairs 18mm thick factory made PVC sheet one side pre-laminated sheet ktichen cabinet/ cupboard shutter. The 18mm thick sheet shutter bent at 90 degree and finish all edges at level for marking edge lipping bending for 0.5 mm thick PVC sheet lipping at all four edges using bonding tape etc complete all as per specified and directed by Engr-in-Charge manufactures specification. |
| 143 | S & F in repairs factory made PVC shelf/ partition of required size consisting of panel of 18 mm thick required size consisting of panel of 18 mm thick celuka PVC ply and for supporting the hold of shelf /partition and shall provided 3 edges in size 18mm x 18mm as per required lenght the front side of the edge visible in the front of the shelf/partition to be edge lipped by 18mm widht x 1mm thick PVC sheet of density 600 kg/cum manufactured by ISO 9001-2015 Certified Company, using solvent cement etc. |
| 144 | S&F stainless steel shelf closing hinges 75mm size for PVC door shutters complete all as specified and directed |
| 145 | S&F 50 x 15mm size magnet door catcher for closing for PVC door shutter complete all as specifid and directed. |
| 146 | S& F 100mm size MS mat/glossy finish handle complete all as specfied and directed. |
| 147 | S&F modular type stainless steel cutlery basket size 20 x 19 x 4 inches (dia of wire not less than 3.00mm) of any shape withside sliding roller clip and silding rails on both side fixed with steel screws incl all fixing arrangements complete all as specified and directed. |
| 148 | All as per item No 147 above but cup and saucer basket size 20 x 17 x 4 inches complete all as specified and directed. |
| 149 | All as per item No 147 above but plain basket size 20 x 19 x 6 inches complete all as specified and directed. |
| 150 | All as per item No 147 above but grain basket size 20 x 17 x 6 inches complete all as specified and directed. |
| 151 | All as per item No 147 above but thali basket size 20 x 19 x 8 inches complete all as specified and directed. |
| 152 | All as per item No 147 above but plain basket size 20 x 17 x 8 inches complete all as specified and directed. |
| 153 | M & L for Water proofing on roof/wall with the follwing steps including 10 year gaurantee & testing for water tightness:-STEP-1. Firstly to cleain the existing surface and make the surface dust free. STEP- II. Crackmore then 0.5mm the opening of crack in V grove and filling with epoxy mortor. STEP-III,Initial coat (mixed 1/2 liter of water in 1 liter of Roof/wall seal of Asian paint/ PIDILITE/ STP/ FOSROC/ACC/ L&T/MARUIT) as a primer (Area cover 1 liter=9-10 sqmtr) STEP-IV.After six hours of primer, apply first coat( one coat) of Asian paint/ PIDILITE/ STP/ FOSROC/ACC/ L&T/MARUIT. roof / wall seal in aparticular direction without mixing of water. Now left it for six hours (Area cover 1 liter= 1.2sqmtr).STEP-V. After again six hours of first coat and apply the second coat of Roof / wall seal in a other direction without mixing of water ( Area cover 1 liter= 1.2sqmtr). Now left it 24 hours. all as specified and directed byEngr-in-Charge Note:- The work of water proofing treatment shall be got executed through expert team of manufacturers of authorised applicator of manufacturer. Make Asian paint/ PIDILITE/ STP/ FOSROC/ ACC/ L&T/ MARUIT or equivalent approved by the GE. |
| 154 | S & F CPVC 20mm outer dia pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ ceiling or laying in floors incl taking up or down steel tubing pipes complete all as specified and directed. |
| 155 | S & F CPVC 25mm outer dia pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ ceiling or laying in floors incl taking up or down steel tubing pipes complete all as specified and directed. |
| 156 | S & F CPVC brass elbow (3/4" X ½") for 20mm outer dia CPVC pipe complete all as specified and directed. |
| 157 | S & F CPVC Male Brass Threaded Adaptor (MTA/ MBTA) for 25mm outer dia pipe complete all as specified and directed. |
| 158 | S & F CPVC Tank Adaptor for 25mm outer dia pipe complete all as specified and directed. |
| 159 | S & F CPVC union for 25mm outer dia pipe complete all as specified and directed. |
| 160 | S & F CPVC Ball Valve for 25mm outer dia pipe complete all as specified and directed. |
| 161 | S&F Powder coated Anodised aluminium frame of doors, windows, ventilators, partitions with one or more rebates including joining cleat for fixing etc. complete all as specified. |
| 162 | S&F of 12mm thick prelaminated particle board, exterior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws complete all as specified. |
| 163 | S&F Solar control film 25 micron reflective type sticked to glass panes as per manufacturers instructions, complete all as specified and as directed |
| 164 | S&F 5.5mm thick tinted or plain sheet glass selected quality and glazing with oil putty in squares n.exc 0.5sqm in each pane. |
| 165 | S&F Powder coated any colour (Thickness or powder coating not less than 50 micron) aluminium door shutters, aluminium section weighing 0.55 kg/ m including necessary joining cleats, glazing clips, rubber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc. complete all as specified (Note:- Glass Particale board & frame shall be measured separately). |
| 166 | S&F powder coated any colour aluminium window side hung type / sliding window shutters aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1no.) complete all as specified (Note:- Glass & frame shall be measured separately). |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
