Military Engineer Services-MES has published Tender For Special Repair To Certain Civil Works At Sag Bldg No P-176 Under Project Navkiran At Metcalfe House, Provision Of Venetian Blinds & Shed With Institute Name And Logo At Main Gate Inmas And Provision Of Electricals Points For Network Switches &. Submission Date for this Tender is 29-05-2024. Biometric Machine Tenders in delhi Delhi. Bidders can get complete Tender details and download the document.
| FileName | File Description | File Size |
| 34f050c3-27c4-421e-9f38-352cfcd9158c.html | Tender Notice | 0 KB |
| BOQ_730859.xls | Tender Document | 0 KB |
| TDR.pdf | Tender Document | 0 KB |
| Tendernotice_1.pdf | Tender Document | 0 KB |
| Sl. No. | Item Description |
| 1 | Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead.For thickness of tiles 08 mm to 25 mm complete all as specified and directed. |
| 2 | Providing and laying vitrified floor tiles 600X600mm size(thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours,shades and design, laid over and including 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., completeall as specified and directed. |
| 3 | Providing and laying Vitrified tiles of 600X 600 mm size (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours, shade & design, in skirting, riser of steps, over and including 12 mm thick bed of cement mortar 1:3 (1cement: 3 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joint with white cement & matching pigments etc. complete all as specified and directed. |
| 4 | Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50mm long with 6mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at every junction, including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre, with 25mm long dry wall screws @ 230 mm interval, including fixing of 12.5 mm thick tapered edge gypsum plain board conforming to IS: 2095- (Part I) :2011 (Board with BIS certification marks) to ceiling section and perimeter channel with the help of dry wall screws of size 3.5 x 25 mm at 230 mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the board with recommended jointing compound , jointing tapes , finishing with jointing compound in 3 layers covering upto 150 mm on both sides of joint and two coats of primer suitable for board, all as per manufacturer"s specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed, all complete as per drawings, specification and complete all as specified and directed. |
| 5 | Demolishing brick work built inIn cement mortar manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material outside MoD land at a municipal dumping site complete all as specified and directed. |
| 6 | M&L Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in Cement mortar 1:6 (1 cement : 6 coarse sand)complete all as specified and directed. |
| 7 | M&L 15 mm thick for cement plaster on brick walls of mix 1:6 (1 cement: 6 fine sand), plaster finished even and fair without using extra cement complete all as specified and directed. |
| 8 | M&L 15 mm thick for cement plaster on brick walls of mix 1:4 (1 cement: 4 fine sand) , plaster finished even and fair without using extra cement complete all as specified and directed. |
| 9 | M&Lfor distempering with one or more coats on new/old completely removed surface workon wall and ceiling surfaceswith 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour complete, as per manufacturer"s instructions all as specified and directed |
| 10 | M&L for Finishing walls with Acrylic Smooth exterior paint of required shade onNew work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) complete all as specified and directed |
| 11 | M&L for Finishing walls with Acrylic Smooth exterior paint of required shade on Old work (Two or more coat applied @ 1.67 ltr/ 10 sqm) on existing surface complete all as specified & directed. |
| 12 | M&L for Removing white / colour wash/distempering by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches complete all as specified and directed |
| 13 | M&L for Distempering with 1st quality acrylic distemper (Ready mix) having VOC content less than 50 grams/ litre of approved brand and manufacture to give an even shade with two coats on old works all as specified and directed |
| 14 | Dismantling stone slab flooring laid in cement mortar including stacking of serviceable material and disposal of unserviceable material within 50 metres lead.complete all as specified and directed |
| 15 | Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc Polished Granite stone slab of all colour and texture except Black, Cherry/Ruby Red.complete all as specified and as directed. |
| 16 | Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres leadOf area 3 sq. metres and below complete all as specified and directed |
| 17 | Providing and fixing Aluminium works For frame andshutters of doors, windows & ventilators,partitions including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately)Powder coated aluminium (minimum thickness of powder coating 50 micron)complete all as specified and directed |
| 18 | Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. With float glass panes of 5 mm thickness (weight not less than 12.50 kg/sqm) complete all as specified and directed. |
| 19 | S&F Toughned glass 10 mm thick fixed to windows frame work including cutting to shape,drilling holes required complete all as specified and directed. |
| 20 | Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete 200x10 mm complete all as specified and directed |
| 21 | Providing and fixing aluminium handles 150mm, , ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete all as specified and directed |
| 22 | S&F Black out rollerZebra blindsdouble layers consisting of aluminium head rail, with flip cover of approved tint and traverse cordand fabric of different size as per site requirments complete all as per manufactuer instruction complete all as specified and directed. |
| 23 | S&F12mm thick plain toughned glass door with all fittings as mentioned below including necessary cutting, making holes including groutinglogo embedded on glass (including taking down old glass doors) ,complete all as specified and directed.:- (a) Floor hydraulic machine- 1 Nos in each door shutter. (b) SS handle of size 300 mm- 2 Nos (Both side in each door shutter. (c) SS over panel set/connecting patch with pivot . (d) SS "L" Connector for wall to wall/ wall to glass - 8 Nos in each door shutters. (e)SS Centre lock- 1 Nos in each Shutter. |
| 24 | S&F 0.15 mm thick solar reflective pvc film (strip type plain and transparent) on glasses pasted with required adhesive complete all as specefied and directed |
| 25 | Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approvedout side the MOD land, for all leads including all lifts involved all as specified and directed |
| 26 | M&L for preparation of newly surface of wall applying 2mm thick wall care putty (in two layers of 1mm thick each) to give an even finished surface complete all as specified and directed. |
| 27 | Excavating in post holes soft/loose soil (or similar holes) not Exc 0.5 Cum getting out returning filling and reamming earth or broken rubble mixed with earth around in layers not exc 25 Cum watering and removing surplus soil to a distance no exc 50m and making good surfaces complete all as specified and directed. |
| 28 | M&L PCC 1:2:4 type B-2 (using 40m graded stone aggregate) in foundations filling and mass concrete complete all as specified and directed. |
| 29 | S&F Steel work in tubular trusses including special shaped washer etc xomplete using ERW or induction butt welded tubes conforming to I.S.1161-1979 grade St-240 complete all as specified and directed. |
| 30 | S&F for plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment Fe 410-W (Gde E-250) quality complete all as specified and directed. |
| 31 | M&L for MS framed work of angle, tee conforming to Fe-290 (Gde E-165) as in roof trusses including distance pieces, cleats etc welding or riveted complete all as specifeid and diected. |
| 32 | S&F 12mm thick multicell polycarbonate fiber glass reinforced translucent plain both side sheeting with four layer 3 cell fixed with self drilling screw and washer in roof in any shape including alimunium profile strip and suitable alumunium L shape clit for edges of roof sheet complete all as specified and directed. |
| 33 | M&L applying two coats of synthetic enamel paint over a coat of red oxide primer including preparartion of new steel or iron surfaces exc 10 cm width or grith complete all as specified and directed. |
| 34 | M&L for granite 25mm thick (of any type) work (table rubbed and polished) in steps jambs, pillars, window cills, cooking platforms and like in cement mortar 1:4 including pointing in white cement 1:2 sing marble dust with admixture of pigment to match with shade of granite complete all as specified and directed. |
| 35 | M&L for point wiring with PVC insulated unsheathed FRLS wire 1.5 sqmm multi stranded two run single core copper conductor cable passing through in and including medium grade PVC conduit pipe complete with all accessories and with 1.5 sqmm PVC insulated copper cable FRLSas continous earth wirewith recessed mounting GI sheet box suitable for modular switch of adequate size including cutting chases in wall where required for inserting new conduit and making good the distrubed surface to match with the existing completeincluding taking down existing old aluminium wiring all as specified and directed for followings :- |
| 36 | One light/ fan point/Exhaust fan point controlled by one switch |
| 37 | One 3 pin socket outlet on independent board |
| 38 | One 3 pin socket outlet on same board. |
| 39 | All as per item No 35.00 here in before but for one socket point out let 3 pin 15 Amp with 2.5 sqmm PVC copper conductor FRLSH and 2.5 sqmm PVC insulated copper conductor FRLSH as earth continuity conductor including taking down existing old aluminium wiring all as specified and directed |
| 40 | M&L for power point wiring concealed type with PVC insulated unsheathed copper cable FRLS 4 sqmm multi stranded two single copper conductor in Including PVC conduit pipe complete with all accessories and with 4.0 sqmm PVC insulated copper cable FRLS continous earth wire, recessed mounting GI sheet box suitable for modular switch/sockets/AC metal clad socket of adequate size complete all as specified and directed . |
| 41 | Supply and fixing in replacement of modular switch single pole one way6 Amps 1 module complete all as specified and directed |
| 42 | Supply and fixing in replacement of modular switch single pole one way 16/20 Amps 1 module complete all as specified and directed |
| 43 | M&L in replacement of modularsocket 6 A/16 amp -3/5 pin combined 2 module complete all as specified and directed. |
| 44 | M&L in replacement of modularsocket 6 A-2/3 pin combined 2 module complete all as specified and directed. |
| 45 | S&F in replacement of metal flush boxand cover plate for modular switches 4 module |
| 46 | S&F in replacement of metal flush box and cover plate for modular switches 3 module |
| 47 | S&F in replacement of metal flush box and cover plate for modular switches 6 module |
| 48 | S&F in replacement of metal flush box and cover plate for modular switches 8 module |
| 49 | S&F in replacement of metal flush box and cover plate for modular switches 12 module |
| 50 | S&F in replacement ofceiling rose, surface bakelite 65x50mm three terminals complete all as specified and as directed |
| 51 | S&F 4 way (4+12 way) double door surface/recess mounting TP&N vertical load line Distribution Board sheet steel dust protected duly powder coated inclusion of 200 Amps tinned copper bus bar, common neutral link , earth bar, din bar for mounting MCBs (but withoit MCBs & incommer) with provision of MCCB as Incomer, complete all as specified and directed.(Note: The cost of MCCB and MCBs shall be measured and paid under separate item) |
| 52 | S&F SP&N DB with 63 Amps rated bus bar, double door with 230 volts 12 way, 50 Hz complete all as specified and directed. |
| 53 | S&F for SP&N DB with 63 Amps rated bus bar, double door with 230 volts 8 way, 50 Hz complete all as specified and directed. |
| 54 | S&F MCB 6-32Amps,10 KA SP C-curve/Serving complete all as specified and directed. |
| 55 | S&F Isolators SPN 63 Amps C curve, 10 KA complete all as specified and directed. |
| 56 | S&F Isolators SPN 40 Amps C curve,10 KA complete all as specified and directed. |
| 57 | S&F MCCB of 04 pole 200 Amp 50Hz 415 volts with rupturing capacity 36KA complete all as specified and directed. |
| 58 | S&F sheet metal enclosure SPN type with 2 pin and earth plug and socket (industrial type with an including one MCB SP, C-curve type of capacity 25/32 Amp, 10 KA complete all as specified and directed |
| 59 | M&L for Wiring for circuit/submain wiring alongwith earth wire of FRLSH PVC insulated copper conductor,single core cable in surface/recessed of size 4X16 sq mm + 2X10 Sq mm earth wire including suitable size ofPVC conduit and lugs/thimble with nuts,bollts and washers etc complete including taking down of existing unserviceable wiring complete all as specified and directed. |
| 60 | M&L for Wiring for circuit/submain wiring alongwith earth wire of FRLSH PVC insulated copper conductor,single core cable in surface/recessed of size 2X6 sq mm + 1X6 Sq mm earth wire including suitable size ofPVC conduit and lugs/thimble with nuts,bollts and washers etc completeincluding taking down of existing unserviceable wiring. |
| 61 | Supply and fixing LED luminaire 600mmx600mm, 35/36Watt, 220V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete all as specified and as directed. |
| 62 | Supply and fixing round shape 12watt 220 volts AC recessed type with high efficiency PMMA diffuser soft glare free light complete with drivers, holders, LED lamp suitable for roof ceiling including connecting up with three core flexible copper conductor cable of suitable size complete. |
| 63 | Supply and fixing LED lights fitting 1x20 W 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete. |
| 64 | S&F wall mounted fan high speed 450mm sweep working on AC 240V, 50Hz, single phase copper winding complete all as specified and as directed. |
| 65 | M&L for Earthing complete with using copper plate 60x60cmx3.15mm thick electrode and 20x3mm copper strip as earthing lead, buried directly in ground (earth pit not less than 2.25metres deep below ground level) with top edge of the plate not less than 1.5meters below normal ground level, connected to galvanised earth lead wire 4.0mm dia by means of bolts, nuts, check nuts and copper washers all as shown in electrical plate No. 3 connected to earthig test point all as specified or indicated including testing on completion. |
| 66 | S&F in replacement earth continuity conductor or main earthing lead fixed to wallor batten or recess or chases or burried in ground or drawn in coduit/ any other indicated situation for loop earthing etc.As required of size 20x3mm copper strip complete all as specified and directed. |
| 67 | Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 70 sqmm 3.5 core complete all as specified and directed. |
| 68 | S&F DLP U PVC trunking system plastic adoptable type 150x50mm with two compartment duly covered installed with suitable support joints incl all accessories complete all as specified and directed. Make : AKG/Legrand/BEC. |
| 69 | Supply and install Cassette type units indoor/outdoor complete with cordless remote control unit ,twin rotary compressor, single phase units 220V - 240V, 50 Hz of capacity 2.0 TR 4 star rating complete all as specified and directed. |
| 70 | Supply and fix Voltage stablizer for automaticoperation, single phase naturally air cooled indoor type & designed for input variation 170V to 250V with accuracy of2.5% and of capacity 5 KVA complete all as specified and directed. |
| 71 | M&L for sheet metal enclosures with plug top and MCBs single pole and natural enclosures with two pin and earth plug and socket complete with one single pole MCB 32A capacity all as per directed. |
| 72 | S & F of electrolyte grade copper tubing of size 3/8" suitable for any type ofsplit type ACincluding synthetic rubber foam complete all as specified and directed. (Note - The quoted rate is inclusive of necessary T&P, Rope, Ladder etc with safety equipment for execution the work . |
| 73 | All as per ser item No. 69 here-in-before but size 5/8"complete all as specified and directed. |
| 74 | M&L for power point wiring using approved colour coding as per IS, with multistranded copper conductor 2.5 Sqmm (nominal area), two single core, PVC insulated and unsheathed FRLS cable 1100 volts grade, ISI-694 marked drwan thoough in and including heavy duty, PVC conduit/casing caping including all accessories etc, heavy duty ISI marked, concealed/surface, mounted as pr site requirement with modular switch, GI box/PVC surface mounted modular box with earthly dolly, covered with modular white cover plate with frame suitable for modular switches including PVC insulated multistranded copper conductor 2.5 Sqmm (nomial area) single core FRLS cable as earth continuity conductor to common earthing and connecting to earth dolly comlete all as specified and directed. |
| 75 | S&F modular switch 16A, SP one way 1 module complete all as specified and directed. |
| 76 | S&F modular socket 6/16A, 2/3 pin combine 2 module complete all as specified and directed. |
| 77 | M&L for sub main wiring complete with two single core 4sqmm, 1100 volts grade, PVC insulated, stranded copper, conductor cable with continous copper earth conductor of 4 Sqmm in and including caping casing including cutting chases, pining in making good to facing where required complete all as specified and directed. |
| 78 | S&F MCB DB 8 way, double door, with 200 amp rated bus bar 240V, SPN recess mounted/wall mounted complete all as specified and directed. |
| 79 | S&F MCB SPN 10-40 Amps, 10 KA, 240V "C" Series complete all as specified and directed. |
| 80 | Material and Labour for earthing complete with Steel earth plate electrode 600mmx600mmx6mm thick burried in ground vertically to a depth not less than 2.25meters below ground level with top edge of the earth plate at a depth not less than 1.5 meter below the ground level, earth plate surrounded by 15cm thick layers of common salt and charcoal dust starting from ground below 15 cm of earth plate and up to 15 cm above the same.GI plate connected with galvanised iron earth wire 4.00 mm dia by means of Copper nuts, bolts and washers.GI wire shall be laid in 20 mm dia light grade GI pipe as protection from top of the plate up to test point (cost of protection pipe up to 7.5 meters from earth electrode will be included in the rates quoted by the contractor) with following provisions complete all as specified and shown in electrical plate No 3 of SSR Part-I & including testing on completion and taking out old materials of earthing :- (a)GI wire of 4 mm dia. (b) Watering pipe GI light grade 20mm dia from top of the earth electrode up to MS funnel with wire mesh embeded in floor of PCC earth pit.(GI Funnel should properly tightned on GI watering pipe and embeded in PCC floor of earth pit with open top suitable for watering of earth pits) (c)Excavation & earthwork in any type of soil PCC earth pit 30x30x30cm constructed in PCC 1:2:4 type B1, exposed surfaces smoothly finished with 15mm thick cement mortar 1:6 plaster including RCC pit cover 50mm thick 1:2:4 type B1 reinforced with 8mm dia mild steel TMT bar 75mm centre to centre both ways with 2 Nos MS handles of 12mm diamild steel TMT bars suitable for carrying of pit cover. (d) All PCC work shall be in 1:2:4 type B-1 using 20mm graded stone aggregate. |
| 81 | M&L for fixing earth continuity conductor or main earth lead fixed to wall or buried in ground or drawn in GI pipe with 4 Sqmm GI wire complete all as specified and directed. |
| 82 | Supply and fixing Detectors Complying with and type certified to EN - 45 Addressable type multisensor detector with heat and smoke combination |
| 83 | Supply and laying of twisted 2 core 1.5sq.mm shieldedPVC insulated FPLP cable for fire alarms control cableISI Marked unsheathed multistranded cable copper conductor including make connection with existing Fire Alarm panel. |
| 84 | Supply and fixing of 25mm diaMS conduit concealed/Surface in wall/Ceiling/above false ceilingand all fixing accessories/ materials including taking down old MS conduit |
| 85 | Supply, installation, testing and commissioning of response indicator on surface/recessed MS box having two LED metallic cover complete with all connections etc complete all as directed. |
| 86 | Supply and fixing Remote response indicatorscomplete all as directed. |
| 87 | Supply, installation, testing and commissioning sector panel suitable for 06 zones, complete with visuals indications for short circuit, fault, open circuit fault fire condition and all other standard facilities as per IS-2189 with mimic diagram for all zones covered complete with all connections, interconnections as required. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
