Haryana Urban Development Authority-HUDA has published Annual Maintenance Of Hsvp Building In Sector -1 To 21, I/A, Ph-I & Ii, Panchkula (Repair And White Washing Of House No. 340-G, Sector-15, Panchkula).. Submission Date for this Tender is 20-05-2024. Building Work Tenders in panchkula Haryana. Bidders can get complete Tender details and download the document.
| FileName | File Description | File Size |
| 2711f0ff-d9be-49ed-8c0c-340188234a52.html | Tender Notice | 0 KB |
| AD0080475.pdf | Tender Document | 0 KB |
| BOQ_447555.xls | Tender Document | 0 KB |
| OT0080475.pdf | Tender Document | 0 KB |
| Tendernotice_1.pdf | Tender Document | 0 KB |
| Sl. No. | Item Description |
| 1 | 9.32.2:-Providing and fixing UV stabilised fibreglass reinforced plastic sheet roofing up to any pitch,including fixing with polymer coated `J` or `L` hooks, bolts and nuts 8mm dia. G.I plain/bitumen washers complete but excluding the cost ofpurlins, rafters, trusses etc. The sheets shall be manufactured out of 2400 TEX panel rovigs incorporating minimum 0.3% ultra-violet stabiliser inresin system under approximately 2400 psi and hot cured. They shall be of uniform pigmentation and thickness without air pockets and shallconform to IS 10192 and IS 12866.The sheets shall be opaque or translucent, clear or pigmented, textured or smooth as specified. 2 mm thick flat |
| 2 | 13.29.2:-Steel work welded in built up sections/ framed work, includingcutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works |
| 3 | 6.1.2:-Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work below plinth level and up to Floor IV level: 1:2:4 (1 cement : 2 coarse sand (zone-III) : 4 graded stone aggregate 20 mm nominal size) |
| 4 | 5.7.4:-Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge. In cement mortar |
| 5 | 7.22.1:-Brick work with common burnt clay non-modular bricks of class designation 7 .5 in superstructure above plinth level up to floor IV level in all shapes and sizes in : Cement mortar 1:4 (1 cement: 4 coarse sand) |
| 6 | 10.100.2 Cement Concrete 1:8:16 with Over burnt (Jhama) Brick Aggregate:40 mm size in foundation and plinth. |
| 7 | 10.61:-Providing and laying rectified Glazed Ceramic floor tiles of size 300x300 mm sqm or more (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick Cement Mortar 1 :4 (1 Cement : 4 Coarse sand), jointing with grey cement slurry @ 3.3 kg/ including pointing the joints with white cement and matching pigments etc., complete. |
| 8 | 5.43.2:-Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead. For thickness of tiles 1 O mm to 40 mm |
| 9 | 18.26:-Providing and fixing factory made Kitchen Cabinet Shutter/Partition 20 mm nominal thickness of approved shade, quality and make, made from rigid foam sheets (Single extruded) having density 600 kg/cum and laminated on both side by laminate SheeUPVC foil lamination. The exposed edges shall be sealed with PVC edge beading of same shade and colour. The shutter shall be fire retardant having necessary screw holding capacity. Shutter shall be fixed to frame using approved hinges with necessary stainless steel screws, all complete as per direction of Engineer-in-charge. |
| 10 | 11.58:-Providing and applying two coats white cement based putty of approvedbrand and manufacturer, over plastered surface and grinding the surface smooth with sand paper to get en even and smooth finish including cost and carriage of all material , labour charges, scaffolding, sundries etc. complete |
| 11 | 30.37.2:-Finishing walls with Acrylic Smooth exterior paint of required shade :Old work (Two or more coat applied @ 1.67 litre/ 10 sqm) on existing cement paint surface |
| 12 | 30.27.1:-Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade: 1 One or more coats on old work |
| 13 | 30.28.1:-Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : 1 One or more coats on old work |
| 14 | 30.22:-Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete. |
| 15 | 22.181:-Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. |
| 16 | 22.105.1:-Providing and fixing C.P. brass long nose bib cock of approved quality conforming to IS standards and weighing not less than 810 gms.15 mm nominal bore |
| 17 | 22.104.1:-Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931. 15 mm nominal bore |
| 18 | 22.1.1:-Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: White vitreous chinaware Wash basin size 630x450 mm with a pair of 15 mm C. P. brass pillar taps |
| 19 | 11.5.3:- 12 mm cement plaster of mix : 1 :4 (1 cement: 4 fine sand) |
| 20 | 9.22:-Providing corrugated G.S. sheet roofing including vertical / curved surface f ixed with polymer coated J or L hooks, bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (up to any pitch in horizontal/ vertical or curved surfaces), excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.1.00 mm thick with zinc coating not less than 275 gm/m2 |
| 21 | 12.7.1.1:-Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows, including ISi marked M.S. pressed butt hinges bright finished of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge. (Note:- Butt hinges and necessary screws shall be paid separately} Second class teak wood 35 mm thick shutter |
| 22 | 10.58:-Providing and fixing 1st quality ceramic glazed wall tiles conforming to IS : 15622(thickness to be specified by the manufacturer ) of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:3 (1 cement: 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
