}

Tender For Finishing Of 01 No.S 120 Men Jawan Barrack Being Used By Sector Hq Udaipur Of 156 Bn Bsf Under Shq Bsf Udaipur., udaipur-Tripura

Border Security Force-BSF has published Tender For Finishing Of 01 No.S 120 Men Jawan Barrack Being Used By Sector Hq Udaipur Of 156 Bn Bsf Under Shq Bsf Udaipur.. Submission Date for this Tender is 13-05-2024. Barrack Tenders in udaipur Tripura. Bidders can get complete Tender details and download the document.




Tender Notice

43321960
Tender For Finishing Of 01 No.S 120 Men Jawan Barrack Being Used By Sector Hq Udaipur Of 156 Bn Bsf Under Shq Bsf Udaipur.
Open Tender
Indian
Tripura
udaipur
13-05-2024

Tender Details

Tender For Finishing Of 01 No.S 120 Men Jawan Barrack Being Used By Sector Hq Udaipur Of 156 Bn Bsf Under Shq Bsf Udaipur.

Key Value

Document Fees
Refer document
EMD
INR 5118.0 /-
Tender Value
INR 2.55 Lakhs /-

BOQ Items

Name of Work:Finishing of 01 No.s 120 Men Jawan Barrack (being used by Sector HQ Udaipur) of 156 Bn BSF Under SHQ BSF Udaipur.
Sl. No. Item Description
1Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level : 1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources)
2Centering and shuttering including strutting, propping etc. and removal of form for Columns, Pillars, Piers, Abutments, Posts and Struts
3Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level. Cement mortar 1:4 (1 cement :4 coarse sand)
4Steel work in built up tubular (round, square or rectangular hollow tubesetc.)trussesetc.,includingcutting,hoisting,fixingin position and applying a priming coat of approved steel primer, including welding andbolted withspecial shaped washers etc. complete. Hot finished welded type tubes
5Providing and fixing mild steel round holding down bolts with nuts and washer plates complete.
6Providing & fixing fly proof wire gauze to windows, clerestory windows & doors with M.S. Flat 15x3 mm and nuts & bolts complete. Stainless steel (grade 304) wire gauze of 0.5 mm dia wire and 1.4 mm aperture on both sides
7Providing & fixing glass panes with putty and glazing clips in steel doors, windows, clerestory windows, all complete with : 4.0 mm thick glass panes
8Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.
9Distempering with 1st quality acrylic distemper, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre, of approved brand and manufacture, including applying additional coats wherever required, to achieve even shade and colour. One coats.
10Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : One or more coats on old work
11Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq.meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground, all complete as per direction of Engineer-in-Charge. With cement mortar 1:4 (1 cement : 4 fine sand)
12Providing & fixing UV stabilised fiberglass reinforced plastic sheet roofing up to any pitch including fixing with polymer coated "J" or "L" hooks, bolts & nuts 8mm dia. G.I plain/bitumen washers complete but excluding the cost of purlins, rafters, trusses etc. The sheets shall be manufactured out of 2400 TEX panel rovigs incorporating minimum 0.3% Ultra-violet stabiliser in resin system under approximately 2400 psi and hot cured. They shall be of uniform pigmentation and thickness without air pockets and shall conform to IS 10192 and IS 12866.The sheets shall be opaque or translucent, clear or pigmented, textured or smooth as specified. 2mm thick flat
13Add for revised GST @18% in place of 12% ie 0.0633%item No. 01 to 11
14Add Cost Index@ 64% on DSR 2021 including GST Amount. Item no. 01 to 11
Disclaimer :
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
Tell us about your Product / Services,
We will Find Tenders for you

Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy

For Tender Information Services Visit : TenderDetail