Military Engineer Services-MES has published Repair/Maintenance Of Steel And Wooden Furniture For Offrs/Jcos/Ors For Md Accn/Otm Accn At Af Stn Sarsawa And Repair, Polishing To Wooden/Steel Furniture & Connected Items At 1Afsb Dehradun Under Ge (Af) Sarsawa. Submission Date for this Tender is 18-05-2024. Brackets and Braces Tenders in sarsawa Uttar Pradesh. Bidders can get complete Tender details and download the document.
Sl. No. | Item Description |
1 | Notes:- Applicable for all items hereinunder wherever applicable as directed by Engr-in-Charge (i) Removal of existing components of following MES pattern furniture item"s shall be done carefully without disturbing the adjoining parts and S&F new componantsofsamepatternas perdrgin lieu of dismantled /discardedcomponents including tightening the joints, pinning ,screwing, welding, gluing, providing hinges & placing every part intact condition.(ii). Cleaning,derusting of stain/dirt withgrinder machine /sand paper, making the surface smooth, filling the holes with putty whereever required and applying two coats of French Polish for wooden items and one coat of synthetic enamelled paint by spray painting(olive Green,white,Grey) for steel items shall be done complete as directed.(iii) Replaced/ changed parts shall befinished seperately first upto the level /extent so that the painting /polishing on whole items shall be matched and desired finishes shall be obtained.(iv) Work shall be executed for the furniture items existing in different user"s units of BSO, GE (AF) Sarsawa including Furniture yard of BSO"s Sub Division complete all as specified & directed by Engineer-in-Charge. Chair Dining(Drg No - FD-228/279) Removing of following old unserviceable parts and S&F new parts of chair dining made from first class teak wood to the shape & size duly french polished, complete all as per specified and shown on drawing. Front leg. |
2 | Rear leg. |
3 | Side/front/rear rail. |
4 | Stiffener. |
5 | S&F new GI "L" shaped bracket duly painted with Black colour synthetic enamel of size 50mm x 50mm x 3mm with suitable screws to tighten the wooden frame of Chairs as required and as directed by Engineer-in-charge. |
6 | PVC Rings at bottom of legs |
7 | Recanning: Removing of old unsv cane and canningof all type of wooden Chair Dinning with using 2.00mmwide 0.4 mm thick half round PVC cane and border with 4.00 mm PVC cane as per Godrej pattern shown on drawing and as specified. |
8 | Chair Easy (Drg No - FD-229) Removing of following old unserviceable parts and S&F new parts of chair Easy made from first class teak wood to the shape & size duly french polished, complete all as specified and shown on drawing. Front leg. |
9 | Rear leg. |
10 | Side/front/rear rail . |
11 | Arm Rest |
12 | PVC Rings at bottom of legs |
13 | Recanning: Removing of old unsv cane and canningof all type of wooden Chair Easy with using 2.00mmwide 0.4 mm thick half round PVC cane and border with 4.00 mm PVC cane as per Godrej pattern shown on drawing and as specified. |
14 | Chair Writing (Drg No - FD-280) Removing of following old unserviceable parts and S&F new parts of chair writing made from first class teak wood to the shape & size duly french polished, complete all as per specified and directed by Engineer-in-charge. Front leg. |
15 | Rear leg . |
16 | Side/front/rear rail |
17 | Arm Rest. |
18 | Stiffener |
19 | S&F new GI "L" shaped bracket duly painted with Black colour synthetic enamel of size 50mm x 50mm x 3mm with suitable screws to tighten the wooden frame of Chairs as required and as directed by Engineer-in-charge . |
20 | PVC Rings at bottom of legs. |
21 | Recanning: Removing of old unsv cane and canningof all type of wooden Chair writting with using 2.00mmwide 0.4 mm thick half round PVC cane and border with 4.00 mm PVC cane as per Godrej pattern shown on drawing and as specified. |
22 | Peg Table (Drg No - FD-236, 277, 384) Removing of old unserviceable top of table & S&F new table top of 18-19 mm thick particle board exterior grade (Make:- Wrown, Archid/Action Tesa/Century/Greenlam)colour/shade as approved by GE with 4 mm thick teakwood half round beading in allsides with strong bonded chemical adhesive as specified and directed. |
23 | Removing of old unsv legs and S&F of new legs of first class teak wood. |
24 | Removing of old unsv top long rail and S&F of new top long railof first class teak wood. |
25 | Removing of old unsvshort rail and S&F of new short railfirst class teak wood. |
26 | S&F new GI "L" shaped bracket duly painted with Black colour synthetic enamel of size 50mm x 50mm x 3mm with suitable screws to tighten the wooden frame of Table as required and as directed by Engineer-in-charge. |
27 | Removing of old unsv PVC rings and S&F new PVC rings. |
28 | Table Center (Drg No -FD 235, 274) Removing of old unserviceable top of table & S&F new table top of 18-19 mm thick particle board exterior grade (Make:- Wrown, Archid/Action Tesa/Century/Greenlam)colour/shade as approved by GE with 4 mm thick teakwood half round beading in allsides with strong bonded chemical adhesive as specified and directed. |
29 | Removing of old unsv legs and S&F of new legs of first class teak wood . |
30 | Removing of old unsv top long rail and S&F of new top long railof first class teak wood . |
31 | Removing of old unsv top short rail and S&F of new top short railfirst class teak wood. |
32 | Removing of old unsv stiffner and S&F of new stiffner of first class teak wood. |
33 | S&F new GI "L" shaped bracket duly painted with Black colour synthetic enamel of size 50mm x 50mm x 3mm with suitable screws to tighten the wooden frame of Table as required and as directed by Engineer-in-charge . |
34 | Removing of old unsv PVC rings and S&F new PVC rings. |
35 | Teapoy (Drg No. 278, 382) Removing of old unserviceable top of table & S&F new table top of 18-19 mm thick particle board exterior grade (Make:- Wrown, Archid/Action Tesa/Century/Greenlam)colour/shade as approved by GE with 4 mm thick teakwood half round beading in allsides with strong bonded chemical adhesive as specified and directed. |
36 | Removing of old unsv legs and S&F of new legs of first class teak wood. |
37 | Removing of old unsv top long rail and S&F of new top long railof first class teak wood. |
38 | Removing of old unsv short rail and S&F of new short railfirst class teak wood. |
39 | S&F new GI "L" shaped bracket duly painted with Black colour synthetic enamel of size 50mm x 50mm x 3mm with suitable screws to tighten the wooden frame of Table as required and as directed by Engineer-in-charge. |
40 | Removing of old unsv PVC rings and S&F new PVC rings. |
41 | Table Writing (Drg No. FD-275) Removing of old unserviceable top of table & S&F new table top of 18-19 mm thick particle board exterior grade (Make:- Wrown, Archid/Action Tesa/Century/Greenlam)colour/shade as approved by GE with 4 mm thick teakwood half round beading in allsides with strong bonded chemical adhesive as specified and directed. |
42 | Removing of old unsv legs and S&F new legs of first class teak wood. |
43 | Removing of old unsv top long rail and S&F new top long railof first class teak wood. |
44 | Removing of old unsv top short rail and S&F new top short railfirst class teak wood. |
45 | Removing of old unsv stiffner and S&Fnew stiffner of first class teak wood. |
46 | Removing of old unsv lock and S&F new brass lock size 50 mm make:-godrej/link/harrison as approved and directed |
47 | Removing of old unsv knobs and S&F new stainless steel knobs as approved and directed. |
48 | Removing of old unsv sides of box S&F new sides of box of 18-19 mm thick particle board exterior grade (Make:- Archid/Action Tesa/Century/Greenlam) with 4mm thick Teakwood Beadingshall be fixed on four sides with strong bonded chemical adhesive through hot pressed machine complete all as per specified and directed by Engineer-in-charge. |
49 | Removing of old unsv door and S&F new door of 18-19 mm thick particle board exterior grade (Make:- Archid/Action Tesa/Century/Greenlam) with 4mm thick Teakwood Beadingshall be fixed on four sides with strong bonded chemical adhesivecomplete all as per specified and directed by Engineer-in-charge. |
50 | Removing of old unsv back ply of box and S&F new back ply 12 mm BWR grade both side commercialas approved as directed. |
51 | Removing of old unsv sides of Drawer and S&F new sides of drawer of 18-19 mm thick particle board exterior grade (Make:- Archid/Action Tesa/Century/Greenlam) with 4mm thick Teakwood Beadingshall be fixed on four sides with strong bonded chemical adhesiveas specified and directed. |
52 | S&F new GI "L" shaped bracket duly painted with Black colour synthetic enamel of size 50mm x 50mm x 3mm with suitable screws to tighten the wooden frame of Table as required and as directed by Engineer-in-charge. |
53 | Removing of old unsv PVC rings of legs and S&F new PVC rings. |
54 | Table Dinning 06 person/Table Dinning 08 person/Table 3x3 (Drg No. FD-239,273,376, FD/MAP-II/03) Removing of old unserviceable top of table dinning 6 person & S&F new table top of 18-19 mm thick particle board exterior grade (Make:-Wrown, Archid/Action Tesa/Century/Greenlam)colour/shade as approved by GE with 4 mm thick teakwood half round beading in allsides with strong bonded chemical adhesive as specified and directed. |
55 | All as per Item No 8.00 but Table dinning 08 person |
56 | All as per Item No 8.00 but Table3x3 |
57 | Removing of the old unsv legs & S&F new legs of teak wood for table dinning 06 person to the shape & size, duly french polished complete all as specified and shown on drawing :- |
58 | All as per item No 8.03 but table dinning 08 person |
59 | All as per Item No 8.03 but Table3x3 |
60 | Removing of the old unsv upper long rail & S&F new upper long rail of teak wood for table dinning 06 person to the shape & size, duly french polished complete all as specified and shown on drawing :- |
61 | All as per item No 8.06 but table dinning 08 person |
62 | All as per Item No 8.06 but Table3x3 |
63 | Removing of the old unsv upper short rail & S&F new upper short rail of teak wood for table dinning 06 person to the shape & size, duly french polished complete all as specified and shown on drawing:- |
64 | All as per item No. 8.09 but table dinning 08 person |
65 | All as per Item No. 8.09but Table3x3 |
66 | S&F new GI "L" shaped bracket duly painted with Black colour synthetic enamel of size 100mm x 100mm x 5mm with suitable screws to tighten the wooden frame of Table as required and as directed by Engineer-in-charge. |
67 | Removing of old unsv PVC ringes and S&F new PVC shoes. |
68 | Sofa Set Single Seater,three Seater, Five Seater complete (Drg No. FD-281,373) Removing of old unsv front legs and s&f new front legs made from first class teak wood as per drg. |
69 | Removing of old unsv rear legs and s&f new rear legs made from first class teak wood as per drg. |
70 | Removing of old unsv front rail of three seater sofa and s&f new front rail made from first class teak wood as per drg. |
71 | Removing of old unsv front rail of single seater sofa and s&f new front rail made from first class teak wood as per drg. |
72 | Removing of old unsv side rail of single seater,three seater,five seater sofa and s&f new side rail made from first class teak wood as per drg. |
73 | Removing of old unsv wooden bearear of single seater sofa and s&f newwooden bearear made from first class teak wood as per drg. |
74 | Removing of old unsv wooden bearear of three seater sofa and s&f newwooden bearear made from first class teak wood as per drg. |
75 | Removing of old unsv wooden batten of single seater/three seater sofa and s&f newwooden batten made from first class teak wood as per drg. |
76 | Removing of old unsv arm rest of sofa set and s&f new arm rest made from first class teak wood as per drg. |
77 | Replcing of existing old cushion foam size 22""x21""x4"" from sofa set 3/5 seater and S&F of new cushion foam size 22""x21""x4"" of 40 density (Make- Sleepwell/Curlon or equivalent) and covered with tapestry cloth as per sample approved by GE. (Cost of tapestry cloth not less then Rs-350/-) all as specified & directed by Engr-in-charge |
78 | Replcing of existing old tapestry clothfrom old cushion foam of sofa set 3/5 seater and S&F new tapestry cloth as per sample approved by GE. (Cost of tapestry cloth not less then Rs-350/-) all as specified & directed by Engr-in-charge |
79 | Bed Ply Top (Drg No. FD-213, 246) Removing of old unsv long rail of bed ply top and S&F new long rail made from first class teak wood as per drg. |
80 | Removing of old unsv short rail of bed ply top and S&F new short rail made from first class teak wood as per drg. |
81 | Removing of old unsv ply of bed ply top and S&F new ply 12 mm thick BWR grade both side commercialMake:- Wrown, Archidply/Greenply/Century/Kit Ply as per drg. |
82 | Removing of old unsv stiffner of bed ply top and S&F new stiffner made from first class teak wood as per drg. |
83 | Removing of old unsv leg of bed ply top and S&F new leg made from first class teak wood as per drg. |
84 | Removing of old unsv teak ply of head board of bed ply top and s&f new teakply size 4mm thick including teak wood beading as required make of ply :-Archidply/Greenply/Century of head boardas per drg. |
85 | Removing of old unsv teak ply of foot board of bed ply top and s&f new teak ply size 4mm thick including teak wood beading as requiredmake of ply :-Archidply/Greenply/Century of foot board as per drg. |
86 | S&F new GI "L" shaped bracket duly painted with Black colour synthetic enamel of size 100mm x 100mm x 5mm with suitable screws to tighten the wooden frame of Table as required and as directed by Engineer-in-charge. |
87 | Table Bed Side (Drg No. FD-248, 276) Removing of old unsv Sides /Top/Bottom S&F new Sides /Top/Bottomof 18-19 mm thick particle board exterior grade (Make:-Wrown, Archid/Action Tesa/Century/Greenlam) with4 mm thick Teakwood Beading shall be fixed whereever required all as per Drg. |
88 | Removing of old unsv shelf S&F new shelfof 18-19 mm thick particle board exterior grade (Make:- Wrown,Archid/ActionTesa/Century/Greenlam) with 4 mm thick Teakwood Beading shall be fixed whereever required all as per Drg. |
89 | Removing of old unsv back ply and S&F new back ply 06 mm BWR grade both side commercialas approved as directed. |
90 | Table 3" x 2" with/ without Drawer (Drg No. FD-55/284/283/291/288 or simillar) Removing of old unserviceable top of table & S&F new table top of 18-19 mm thick particle board exterior grade (Make:- Wrown, Archid/Action Tesa/Century/Greenlam)colour/shade as approved by GE with 4 mm thick teakwood half round beading in allsides with strong bonded chemical adhesive as specified and directed. |
91 | Removing of old unsv legs and S&F new legs of first class teak wood. |
92 | Removing of old unsv top long rail and S&F new top long railof first class teak wood. |
93 | Removing of old unsv top short rail and S&F new top short railfirst class teak wood. |
94 | Removing of old unsv stiffner and S&Fnew stiffner of first class teak wood. |
95 | Removing of old unsv knobs and S&F new stainless steel knobs as approved and directed. |
96 | Removing of old unsv sides of Drawer and S&F new sides of drawer of 18-19 mm thick particle board exterior grade (Make:- Archid/Action Tesa/Century/Greenlam) with 4mm thick Teakwood Beadingshall be fixed on four sides with strong bonded chemical adhesiveas specified and directed. |
97 | S&F new GI "L" shaped bracket duly painted with Black colour synthetic enamel of size 50mm x 50mm x 3mm with suitable screws to tighten the wooden frame of Table as required and as directed by Engineer-in-charge. |
98 | Removing of old unsv PVC rings of legs and S&F new PVC rings. |
99 | Table Dressing Gents :FD-230 Mirror 5mm thick (Make-Modiguard/Atul/Saintgobbain) & 6 mm thick Back ply BWP grade (Make: Century Ply/ Greenply/ Archidply)as per drg. |
100 | Frame for mirror assembly, complete as per drg. |
101 | Complete Cabinet including drawer shall bemade of 18 mm thick Plywood (Make-Century ply/Greenply/Archidply) complete with telescopic channel (make -Ebco/Ozone/Hettich) complete . Rest all as per drg. |
102 | 6 mm thick back ply BWP gradeof table dressing box as per drg. |
103 | Hat stand: FD-233 a) Hat stand shall be made of 18 mm thick BWP plywod with 1 mm thick sunmica complete as directed by EIC |
104 | b) Mirror 5mm thick with other componentsas per drg (Make-Modiguard/Atul/Saintgobbain) |
105 | c) Brass pegs as per sample held at BSO yard. |
106 | Table computer: MAP/TP Removing of old unserviceable top of table & S&F new table top of 18-19 mm thick particle board exterior grade (Make:- Wrown, Archid/Action Tesa/Century/Greenlam)colour/shade as approved by GE with 4 mm thick teakwood half round beading in allsides with strong bonded chemical adhesive as specified and directed. |
107 | Sides with made of 18-19 mm thick particle board exterior grade (Make:- Archid/Action Tesa/Century/Greenlam) complete rest all as per drg. |
108 | Complete key board made of 18-19 mm thick particle board exterior grade (Make:- Archid/Action Tesa/Century/Greenlam) with telescopic channel (make-Ebco/Ozone/Hettich) complete rest all as per drg & as directed by EIC |
109 | Complete mouse board made of 18-19 mm thick particle board exterior grade (Make:- Archid/Action Tesa/Century/Greenlam) with telescopic channel (make-Ebco/Ozone/Hettich) complete rest all as per drg & as directed by EIC |
110 | Polishing of Furniture (i)M&L for melamine polish with spray Machine after removing of existing polish by scraping and smoothing of sufrace bvy girnder machline wherever required or as idricected b;ly EICto the following furniture articles all aare of MES pattern viz DB/FD/MAP series or similadr items including applying wax for deporessed surface as well as washling swilth cvaustilv sodas wdherever required before polishing all as specified and shown on drg and as direceted by Engineer in charge. (ii) Work will be execuded where the fruniture exist indiffrent user units at OTM8/MD Accn under the jurisdiction of GE (AF) Sarsawa including BSO"s furniture yard as directed by Engineer in charge Chair Dining(Drg No - FD-228/279) |
111 | Chair Easy (Drg No - FD-229) |
112 | Chair Writing (Drg No - FD-280) |
113 | Peg Table (Drg No - FD-236,277,384) |
114 | Teapoy (Drg No. 278, 382) |
115 | Table Writing (Drg No. FD-275) |
116 | Table Center (Drg No. 235 , 274) |
117 | Sofa Set single seater (Drg No. 281 , 373) |
118 | Sofa Set Three Seater (Drg No. 281 , 373) |
119 | Bed ply Top (Drg No. FD-213, 246) |
120 | Table Dinning 06 person (Drg No. FD-239,273,376, FD/MAP-II/03) |
121 | Table Dinning 08 person (Drg No. FD-239,273,376, FD/MAP-II/03) |
122 | Table Dinning 3x3 |
123 | Table 3" x 2" with/ without Drawer (Drg No. FD-55/284/283/291/288 or simillar) |
124 | Hat stand: FD-233 |
125 | Table Office officer Steel :FD-84/ FD 1003 Legs, as per drg A) Removal of following existing unserviceable components of various MES F/DB/FD/TP/MAP furniture items carefully without disturbing the adjoining parts and S&F new components in lieu of dismantled components including tightening the joints, screwing, weldging, glueing, providing hinges,denting,placing everypart in-tact , as applicable as per drgs.B) Work will be executed where the furniture exist in different User Units/ Married Accn of GE(AF) SARSAWA including BSO Furniture Yard as directed by Engineer-in-Charge |
126 | Lock of drawer(Make- Godrej/Harrison/Ebco/mydas) as per drg |
127 | Repairs to Drawer/shutter by replacing old u/s parts with new parts including tinkering/denting, welding, etc. all as shown, as specified & as directed by Engr-in-Chg. |
128 | Stiffeners as per drg |
129 | PVC Shoes std quality all as per drg |
130 | Welding the joints of legs / square tube as per drg |
131 | Removing of old unserviceable top of table & S&F new table top of 18-19 mm thick particle board exterior grade (Make:- Archid/Action Tesa/Century/Greenlam)colour/shade as approved by GE with 4 mm thick teakwood half round beading in allsides with strong bonded chemical adhesive as specified and directed. |
132 | Table Office Clerk Steel :FD-84/381 FD 1004 Legs, as per drg |
133 | Lock of drawer(Make- Godrej/Harrison/Ebco/mydas) as per drg |
134 | Repairs to Drawer/shutter by replacing old u/s parts with new parts including tinkering/denting, welding, etc. all as shown, as specified & as directed by Engr-in-Chg. |
135 | Stiffeners as per drg |
136 | PVC Shoes std quality all as per drg |
137 | Welding the joints of legs / square tube as per drg |
138 | Removing of old unserviceable top of table & S&F new table top of 18-19 mm thick particle board exterior grade (Make:- Archid/Action Tesa/Century/Greenlam)colour/shade as approved by GE with 4 mm thick teakwood half round beading in allsides with strong bonded chemical adhesive as specified and directed. |
139 | Almirah Large Steel / (1/2 h & 1/2 S ): FD-67 / 1031/ TP S/S 6 lever locks (Make-Godrej/Hettich/Harrison/mydas/Rina ) as per drg |
140 | CP Handle as per sample/as per drg |
141 | Legs as per drg |
142 | Repairs to door as specified including replacement of hinges |
143 | Repair/adjustment to existing shelf including welding as per drg |
144 | Shutter/door as per drg. |
145 | Shelf as per drg |
146 | Almirah Medium / Small Steel: FD-1032/FD-104(m) S/S 6 lever locks (Make-Godrej/Hettich/Harrison) as per drg |
147 | CP Handle as per sample/as per drg |
148 | Legs as per drg |
149 | Repairs to door as specified including replacement of hinges |
150 | Repair/adjustment to existing shelf including welding as per drg |
151 | Shutter as per drg. |
152 | Shelf as per drg |
153 | BED HARD STEEL (Drg No. FD/E6/MAP/08 (R) Removing of old and unsv Ply top from Hard Bedand S&F new 12 mm thick plywood of suitable size, ISI marked, (Make:- Wrown, Greenply/Archid ply/Duro/Kitply)BWR phenol bonded commercial plywood with suitable size nut and bolts all as shown on drawing and as directed. |
154 | Removing of old unsv particle board from Head and Foot board of bed and S&F newHead and Foot board made from 18 mm thick pre laminated particle board Exterior Grade Type Make:- Greenply/Archid ply/Duro/Action Tesa/Kitply) with suitable size screw all around side of board shall be covered with 1mm thick PVC beading /Edging fixed with suitable adhesive complete all as directed. |
155 | Removing of old unsv stiffner of Hard Bed and S&F New stiffner made from 25mmx25mm sq MS Pipe 18 Gauze dully painted with synthetic enamel black all as directed |
156 | Removing of old unsv Rusted Legs and S&F new Legsmade from 38mmx38mm sq MS Pipe 18 Gauze dully painted with synthetic enamel black all as directed |
157 | Welding to broken joints of Hard Bed complete all as directed . |
158 | Removing of old unsv Rubber Shoes and S&F new Hard Rubber Shoes as per sample approved restall as directed. |
159 | Removing of old unsv Nuts of long rail and S&F New Nuts all as specified in drawing and directed. |
160 | TABLE BED SIDE (MAP) (Drg No. FD/E6/MAP/15 (R) Removing of old unsv particle board from Top/Bottom/sides/ Front side of Drawer and S&F new Top/Bottom/sides/ Front side of Drawer made from 18 mm thick pre laminated particle board Exterior Grade Type(Make:- Greenply/Archid ply/Duro/Action Tesa/Kitply ) with suitable size screw all around side of board shall be covered with 4 mm thick wooden beading /Edging fixed with suitable adhesive complete all as directed. |
161 | Removing of old unsv BackPly of Table Bed Side and S&F New Ply 8 mm thick BWR grade (Make:- Greenply/Archid ply/Duro/Century/Kitply) of suitable size dully fitted with screw and adhesive complete all as directed. |
162 | Removing of old unsv Ply of Drawer Table Bed Side and S&F New Ply 6 mm BWR grade(Make:- Greenply/Archid ply/Duro/Century) of suitable size dully fitted withscrew and adhesive complete all as directed. |
163 | Removing of old unsv Teakwood runner and S&F New Teakwood runnerwith suitable size screw and adhesive complete all as directed. |
164 | Removing of old unsv Telescopic channel and S&F New Stainless Steel Telescopic ChannelISI Marked as approved by Garrisson Engineer) with suitable size screw and adhesive complete all as directed. |
165 | Removing of old unsv Handle and S&F New Stainless Steel handle dully fixed with suitable size screwcomplete all as directed. |
166 | Removing of old unsv Legs and S&F New Legs made from 18 mm MSSquare Pipe 18 Gauze dully painted with black colour synthetic enamelcomplete all as directed. |
167 | Removing of old unsv rubber shoe and S&F New Hard Rubber/PVC Shoe complete all as directed. |
168 | Shoe Rack Steel FD/E6/MAP/02® Welding including bar whereverrequiredas directed by E-in-Incharge |
169 | Replacement of unserviceable Jaliwherever requiredas per drg |
170 | Hard rubber shoes std quality as per drg |
171 | Chair Verandah :FD-19, FD-256, FD-359 Welding joints of leg of 19/20mm MS tube & other jointsas per drg as directed by EIC |
172 | Hard rubber shoes as per drg and as directed by EIC |
173 | Removing old unserviceable cane from chair verandah & recaning the chairsetc with approved new plastic cane4 mm wide half round as per Matt Pattern all as specified(colour of cane shall approved by EIC/GE) |
174 | Locker Steel: FD-1029/257/SKD-562 S/S Hasp & Staple ,restas per drg |
175 | Repairs to door/sidesincluding replacement of hinges including welding |
176 | Shutter/door as per drg |
177 | Legs as per drg. |
178 | CP Conduit pipe as per drg |
179 | Shelf as per drg. |
180 | Charpoy IP Ply Top: FD/MAP-II/01 12 mm thickplywood top BWP grade(Make- Wrown,Century ply/Greenply/Archidply/Duroply) as per existingshape and size withshunken nut/bolts ,appropriate hole shall be made with elecrtic drill machine complete rest all as drg and as directed by EIC |
181 | Hard rubber shoe std quality as per drg |
182 | Welding work wherever required as directed by EIC |
183 | Chair School with hard board :FD/E6/MAP/05 One piece seat and back (Make: Blowplast/Supreme or equivalent ) as per drg. |
184 | Removing of old unserviceable top of table & S&F new table top of 18-19 mm thick particle board exterior grade (Make:- Archid/Action Tesa/Century/Greenlam)colour/shade as approved by GE with 4 mm thick teakwood half round beading in allsides with strong bonded chemical adhesive as specified and directed. |
185 | Welding work wherever required as directed by EIC. |
186 | Hard rubber shoe std quality as per drg |
187 | Charpoy GI pipe ply top: FD-220 12 mm thickplywood top BWP grade(Make- Wrown, Century Greenply/Archidply/ Duroply) as per existingshape and size withshunken nut/bolts ,appropriate hole shall be made with elecrtic drill machine complete rest all as drg and as directed by EIC |
188 | S& F 895 mm long stifnner made FI of size 40x5 mm thickduly paintedwith red oxide primercomplete all asdirected by EIC. |
189 | S&F in replacement of long rail of 32 mm dia Medium grade GI pipes ISI Markedincluding cutting threading etc as required all as specified and shown on drg Make of pipe JINDAL/Prakash/TATA complete all as specified and directed. |
190 | Replacement of unserviceable short rail from charpoy GI pipe 32mm bore but "except pipe" including cutting threading etc as required and directed.Note : Pipe shall be used from unserviceable long rail obtained from item No 13.03here in before. |
191 | Replacement of unservicable legs from charpoy GI pipe 32mm dia but "except pipe" including cutting threading etc as required and directed with bottom plug made of MS Round disc complete all as specified and directed. Note :Pipe obtained from ser item No 13.04 above shall be used for this items. |
192 | S&F in replacement ofGI 3 way elbow 32 mm dia complete all as specified and directed. |
193 | S&F in replacement of32mm check nutscomplete all as specified and directed. |
194 | Charpoy IP folding :FD-388(R ) 08 mm thickplywood top BWP grade(Make- Wrown, Century ply/Greenply/Archidply/Duroply) ISI marked as per existingshape and size withshunken nut/boltscomplete rest all as drg and as directed |
195 | Hard rubber shoe std quality as per drg |
196 | Welding work wherever required with FI as directed by EIC |
197 | CHAIR COMPUTER (Drg No. FD/E6/MAP/01) Removing of old unsv Tapestry Cloth from chair and S&F new Tapestry Cloth rate of Tapestry cloth should be not less than 120/- per meter with new PVC Lipping all around itcomplete all as specified and directed. |
198 | Removing of old unsv Handle and S&F New Black PU Handleall as specified and directed by the Engineer-in-Charge |
199 | Removing of old unsv seat and back PU foam and S&F New seat& back PU Foamall as specified and directed. |
200 | Removing of old unsv seat and backply and S&F New seat& back Ply 12 mm Hot pressedall as specified and directed . |
201 | Removing of old unsv Pedestral Assembly complete with castor wheel and S&F New Metalic Pedestral Assembly complete with castor wheel all as specified and directed . |
202 | Removing of old unsv Castor Wheel and S&F New Castor Wheel made from superior quality as per approved sample by Garrisson Engineer all as specified and directed . |
203 | Removing of old unsvPVC back Sheet cover and S&F New PVC back Sheet cover including setting the tilting Mechanism of Chairall as specified and directed . |
204 | Removing of old unsv Hydralic System and S&F New Hydralic System of ISI Marked as approved by Garrisson Engineer all as specified and directed . |
205 | CHAIR WRITING (Drg No. FD/E6/MAP/12) Removing of old unsv Tapestry Cloth from chair and S&F new Tapestry Cloth rate of Tapestry cloth should be not less than 120/- per meter with new PVC Lipping all around itcomplete all as specified and directed. |
206 | Removing of old unsv Handle and S&F New Black PU Handleall as specified and directed . |
207 | Removing of old unsv seat and back PU foam and S&F New seat& back PU Foamall as specified and directed . |
208 | Removing of old unsv seat and backply and S&F New seat& back Ply 12 mm Hot pressedall as specified and directed. |
209 | CHAIR DINNING (Drg No. FD/MAP-II/05) Removing of old unsv/broken Front Legsand S&F New First ClassTeak WoodFront Legs dully polishedcomplete all as directed. |
210 | Removing of old unsv/broken Rear Legsand S&F New First ClassTeak Wood Rear Legs dully polishedcomplete all as directed. |
211 | Removing of old unsv/broken Stiffner and S&F New First ClassTeak Wood Stiffner dully polishedcomplete all as directed. |
212 | Removing of old unsv/broken Front/Rear/sides Rail and S&F New First ClassTeak Wood Front/Rear/sides Rail dully polishedcomplete all as directed. |
213 | Removing of old unsv/broken ply of seat and S&F New ply of seat 12 mm thick BWR Grade complete all as directed. |
214 | Removing of old unsv Foam of seat and S&F New Foam of seat 75 mm thick Density 40( Make:- Sleepwell/Kurlon/Reliance) dully covered with superior quality rexine cover rate not less than 120/-per meter sample as approved by Garrisson Engineer complete all as directed. |
215 | Removing of old unsv Cover of seat and S&F New Cover of seat of superior quality rexine cover rate not less than 120/-per metersample as approved by Garrisson Engineercomplete all as directed. |
216 | Removing of old polish from wooden surface of chair with Grinder machine and suitable type sand paper filling the holes with putty making the surface smooth then apply two coat of French polishcomplete all as directed. |
217 | Table 3 x 3Steel Legs, as per drg |
218 | d) Stiffeners as per drg |
219 | e) PVC Shoes std quality all as per drg |
220 | f) Welding the joints of legs / square tube as per drg |
221 | g) Removing of old unserviceable top of table & S&F new table top of 18-19 mm thick particle board exterior grade (Make:- Archid/Action Tesa/Century/Greenlam)colour/shade as approved by GE with 4 mm thick teakwood half round beading in allsides with strong bonded chemical adhesive as specified and directed. |
222 | Table with drawer 3 x 2 Steel Legs, as per drg |
223 | Lock of drawer(Make- Godrej/Harrison/Ebco/mydas) as per drg |
224 | Repairs to Drawer/shutter including tinkering/denting, welding, etc. all as shown, as specified & as directed by Engr-in-Chg. |
225 | Stiffeners as per drg |
226 | PVC Shoes std quality all as per drg |
227 | Welding the joints of legs / square tube as per drg |
228 | Removing of old unserviceable top of table & S&F new table top of 18-19 mm thick particle board exterior grade (Make:- Archid/Action Tesa/Century/Greenlam)colour/shade as approved by GE with 4 mm thick teakwood half round beading in allsides with strong bonded chemical adhesive as specified and directed. |
229 | A) M&L for painting two coat of synthetic enamel paintwithshade as approved by EIC/GE over a coat of primer through spray machine , both internally & externally to the following furniture articles, all are of MES pattern viz F/FD/DB/MAP series or Similar items including removing of dust, dirts,dents etc and removing of existing paint both internally & externally , applying putty to level the surface before primer/painting, all as specified and shown on drgs and directed by Engineer-in-Charge. B) Work will be executed where the furniture exist in different User Units/Md accns of GE(AF) Sarsawaincluding BSO"s Furniture Yard as directed by Engineer-in-Charge Table office officer steel: FD-1003 |
230 | Table Clk steel: FD-1004 |
231 | Almirah Steel Large: FD-67/351, 1031, |
232 | Almirah Steel Medium/Small: FD-1032 |
233 | BED HARD STEEL (Drg No. FD/E6/MAP/08 (R) |
234 | TABLE BED SIDE (MAP) (Drg No. FD/E6/MAP/15 (R) |
235 | Rack Shoe Steel FD-FD/E6/MAP/02 R |
236 | Chair Verandah: MAP/FD |
237 | Locker Steel :FD-1029/257/127 |
238 | Charpoy IP Hard Top: MAP |
239 | Chair School with hard board |
240 | Charpoy IP folding: FD-388 (R) |
241 | CHAIR WRITING (Drg No. FD/E6/MAP/12) |
242 | Table 3 x 3Steel |
243 | Table with drawer 3 x 2 Steel |
244 | Trestle Store Room Steel |
245 | Rack steel any type/Book Shelf open large all type :FD-1038 & 1023/69 |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail