Bharat Sanchar Nigam Limited-BSNL has published Tender For Repair And Maintenance Works To Bsnl Staff Qtrs At P And T Colony, Binakhandi, Sambalpur. Submission Date for this Tender is 13-05-2024. Building Work Tenders in sambalpur Odisha. Bidders can get complete Tender details and download the document.
| Sl. No. | Item Description |
| 1 | SH:-Concrete Work |
| 2 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : |
| 3 | 1:2:4 (1 Cement : 2 coarse sand(zone-III) derived from natural sources : 4 graded stone aggregate 40 mm nominal size derived from natural sources). |
| 4 | SH:-Wood and PVC Work |
| 5 | Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length ( hold fast lugs or dash fastener shall be paid for separately). |
| 6 | Sal wood |
| 7 | Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows fixing with butt hinges of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge. (Note:- Butt hinges and necessary screws shall be paid separately) |
| 8 | Kiln seasoned and chemically treated hollock wood |
| 9 | 35 mm thick shutters |
| 10 | 30 mm thick shutters |
| 11 | Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick : |
| 12 | Ply wood 7 ply, 9 mm thick : |
| 13 | Decorative plywood one side decorative veneer and commercial veneer on other face (Type 1) conforming to IS 1328 BWR Type |
| 14 | Providing and fixing aluminium tower bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade with necessary screws etc. complete : |
| 15 | 250x10 mm |
| 16 | Providing and fixing aluminium handles ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete : |
| 17 | 125 mm |
| 18 | 100 mm |
| 19 | Providing and fixing 37 mm thick factory made PVC door shutter, styles and rails made of PVC hollow section of size 100 mm x 37 mm with wall thickness 2 mm (± 0.2 mm), with inbuilt bead on one side, styles and rails mitered cut and joint at the corners by means of 2 nos of plastic brackets of size 75 mm x 220 mm at each corner and stainless steel screws, reinforcing the hinge side of style by inserting PVC profile of size 28 mm x 30 mm, with wall thickness 2 mm ( ± 0.2 mm). Lockrail of size 100 mm x 37 mm, wall thickness 2 mm (+ 0.2 mm) will be fixed to the vertical styles. Providing with PVC snapfit beads and panel of size 100 mm x 20 mm, and inserting 2 nos tie bar of 6 mm dia and fastening with nuts and washers complete, all as per manufacturer"s specification and direction of Engineer-in-charge. |
| 20 | Providing and Fixing factory made PVC door frame made of PVC extruded sections of size 75 mm x 53 mm, having wall thickness 2.0 mm (± 0.2 mm). Both verticalssides of the frame reinforced with PVC profile of cross section size 28 mm x 30 mm x 2 mm thickness (± 0.2 mm) and 75 mm x 200 mm long, including reinforcing both ends of the top frame with PVC profile. PVC Door Frame and PVC reinforcement profile to be mitred cut, jointed and fusion welded together, including providing and fixing 3 nos of 125 mm long stainless steel hinges to frame, fixing the frame with jamb with required nos & sizes of anchor dash fastener, all complete as per manufacturer"s specification and direction of engineer-in- charge. |
| 21 | SH-Flooring |
| 22 | Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc. complete. |
| 23 | 40 mm thick with 20 mm nominal size stone aggregate |
| 24 | Cement plaster skirting up to 30 cm height, with cement mortar 1:3 (1 cement : 3 coarse sand), finished with a floating coat of neat cement. |
| 25 | 18 mm thick. |
| 26 | Providing and laying Ceramic glazed floor tiles of size 300x300 mm(thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement :4 Coarse sand), jointing with grey cement slurry @ 3.3kg/sqm including pointing the joints with white cement and matching pigment etc.,., complete. |
| 27 | SH:-Roofing |
| 28 | Providing gola 75x75 mm in cement concrete 1:2:4 (1 cement :2 coarse sand : 4 stone aggregate 10 mm and down gauge) including finishing with cement mortar 1:3 (1 cement : 3 fine sand) as per standard design |
| 29 | In 75x75 mm deep chase |
| 30 | Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, |
| 31 | 110 mm diameter (i)Single socketed pipes. |
| 32 | Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A including jointing with seal ring conforming to IS :5382 leaving 10 mm gap for thermal expansion. |
| 33 | 110 mm bend Bend 87.5° |
| 34 | Providing and fixing unplasticised -PVC pipe clips of approved design to unplasticised - PVC rain water pipes by means of 50x50x50 mm hardwood plugs, screwed with M.S. screws of required length including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the wall etc. complete. |
| 35 | 110 mm |
| 36 | SH:-Finishing |
| 37 | White washing with lime to give an even shade : |
| 38 | Old work (two or more coats) . |
| 39 | Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : |
| 40 | One or more coats on old work. |
| 41 | Distempering with 1st quality acrylic washable distemper (ready made) having VOC content less than 50 gm per ltr. of approved manufacturer and of required shade and colour complete as per manufacturer"s specification. |
| 42 | One or more coats on old work. |
| 43 | SH:-Repairs to building |
| 44 | Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq. meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground , all complete as per directions of Engineer-In-Charge. |
| 45 | With cement mortar 1:4 (1cement: 4 coarse sand). |
| 46 | Renewing glass panes, with putty and nails wherever necessary including racking out the old putty: |
| 47 | Float glass panes of nominal thickness 4 mm (weight not less than 10kg/sqm). |
| 48 | Cleaning and de-silting of gully trap chamber, including removal of rubbish mixed with earth etc. and disposal of same, all as per the direction of Engineer-in-charge. |
| 49 | Dismantling W.C. Pan of all sizes including disposal of dismantled materials i/c malba all complete as per directions of Engineer-in- Charge. |
| 50 | Taking out existing wooden door shutter, repair by cutting, painting etc. and refixing of repaired door shutters to existing door frames, including replacement of hinges with screws, etc. as required, all complete as per the direction of the Engineer-in-charge. |
| 51 | SH:-Dismantling and Demolishing |
| 52 | Dismantling G.I. pipes (external work) including excavation and refilling trenches after taking out the pipes, manually/ by mechanical means including stacking of pipes within 50 metres lead as per direction of Engineer-in-charge : |
| 53 | 15 mm to 40 mm nominal bore |
| 54 | SH:-Sanitary Installation |
| 55 | Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings andfixtures complete, including cutting and making good the walls and floors wherever required : |
| 56 | W.C. pan with ISI marked white solid plastic seat and lid |
| 57 | Providing and fixing white vitreous china water closet squatting pan (Indian type) : |
| 58 | Orissa pattern W.C. pan of size 580x440 mm |
| 59 | Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible tube upto 1 metre long with S.S. triangular plate to Eureopean type W.C. of quality and make as approved by Engineer - in - charge. |
| 60 | Providing and fixing P.V.C. low level flushing cistern with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete. |
| 61 | 10 litre capacity - White |
| 62 | Providing and fixing solid plastic seat with lid for pedestal type W.C. pan complete : |
| 63 | White solid plastic seat with lid |
| 64 | Providing and fixing G.I. inlet connection for flush pipe connecting with W.C. pan. |
| 65 | Providing and fixing white vitreous china wash basin including making all connections but excluding the cost of fittings : |
| 66 | Flat back wash basin of size 630x450 mm. |
| 67 | Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. |
| 68 | 40 mm dia Flexible pipe |
| 69 | Providing and fixing 100 mm sand cast Iron grating for gully trap. |
| 70 | Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. |
| 71 | Providing and fixing 600x120x5 mm glass shelf with edges round off, supported on anodised aluminium angle frame with C.P. brass brackets and guard rail complete fixed with 40 mm long screws, rawl plugs etc., complete. |
| 72 | Providing and fixing PTMT Waste Coupling for wash basin and sink, of approved quality and colour. |
| 73 | Waste coupling 38 mm dia of 83 mm length and 77 mm breadth, weighing not less than 60 gms. |
| 74 | Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour. |
| 75 | 450 mm long towel rail with total length of 495 mm, 78 mm wide and effective height of 88 mm, weighing not less than 170 gms. |
| 76 | SH: Water Supply |
| 77 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. : Internal work - Exposed on wall |
| 78 | 15 mm nominal outer dia. Pipes. |
| 79 | 20 mm nominal outer dia. Pipes. |
| 80 | 25 mm nominal outer dia .Pipes. |
| 81 | 40 mm nominal outer dia. Pipes. |
| 82 | 50 mm nominal outer dia. Pipes. |
| 83 | Providing and fixing G.I. pipes complete with G.I. fittings and clamps, i/c cutting and making good the walls etc. : Internal work – Exposed on wall. |
| 84 | 15 mm dia. nominal bore |
| 85 | 25 mm dia. nominal bore |
| 86 | Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc. : External work |
| 87 | 40 mm dia. nominal bore |
| 88 | Making connection of G.I. distribution branch with G.I. main of following sizes by providing and fixing tee, including cutting and threading the pipe etc. complete : |
| 89 | 25 to 40 mm nominal bore |
| 90 | Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete : |
| 91 | 25 mm nominal bore |
| 92 | Providing and fixing uplasticised PVC connection pipe with brass unions : |
| 93 | 15 mm nominal bore 30 cm length |
| 94 | Providing and fixing C.P. brass shower rose with 15 or 20 mm inlet : |
| 95 | 100 mm diameter |
| 96 | Providing and fixing PTMT bib cock of approved quality and colour. |
| 97 | 15mm nominal bore, 86 mm long. Weighing not less than 88 gms. |
| 98 | Providing and fixing PTMT stop cock of approved quality and colour. |
| 99 | 15 mm nominal bore, 86 mm long. Weighing not less than 88 gms. |
| 100 | Providing and fixing PTMT pillar cock of approved quality and colour . |
| 101 | 15mm nominal bore, 107 mm long. Weighing not less than 110 gms. |
| 102 | SH_Water Proofing |
| 103 | Grading roof for water proofing treatment with |
| 104 | Cement mortar 1:3 (1 cement : 3 coarse sand) |
| 105 | SH:- MARKET RATED ITEMS |
| 106 | Cleaning and disinfectingunder ground sump/Syntex tankby bailing / pumping out dirty water , brushing the inside surface for removing mush, algae etc effectively with the help of bleaching powder, washing and flushing the inside with sufficient water including disposal of waste within a lead of 50 metre all complete as per direction of Engineer-in-charge. |
| 107 | Engaging labour (sewerman / beldar / coolie) for cleaning ofdrains of any size / roof terrace ,chajja gully trap at any floor including removal of debrishes, sullage & disposal with in a lead of 50 m all complete as per direction of Engineer-in-charge. |
| 108 | Cleaning of of OHT with independent staging having 25000.00 Liters capacity and height 90 ft. of silt saping fungi etc i/c its disposal beyond municipal area or as directed by the EIC ,Washing tank with cleanwater and disfetching with bleaching power using @ 0.5 gm/Ltr etc. complete as per direction direction of EIC . The rate shallbe inclusive of material cost,Labour charge ,tools equpiment, Insurance charge for safty of labour and incidential all complete and nothing shall be paid on any account unless otherwise specially mentioned in the item |
| 109 | Cleaning of manholes along sewer line including removing the waste , sludge deposits along with flushing with sufficient water all complete as per direction of Engineer-in-charge. |
| 110 | Uprooting trees & plants from roof and walls or other building parts including applying acid and making good the damages with cement concrete or mortar so as to match with the surrounding surface. The rate includes all materials, labour, T&P, scaffolding & disposal of debrishes in the municipal dumping ground. |
| 111 | Cleaning of open surface drain from all garrabage & disposal of the removed waste materials out side of the campous beyound residential area as per direction po EIC. |
| 112 | Providing and fixing SWR PVC Soil, Waste and Vent pipes of SKIPPER, SUPREME, ASHIRVAD or equivalent make conforming to IS:13592 (Type-B) including jointing with seal ring conforming to IS:5382 or solvent cement as per site condition including testing of joints etc. complete as per direction of Engineer-in-Charge. |
| 113 | 100 mm |
| 114 | Providing and fixing PVC gate valve with PVC handle of approved quality. |
| 115 | 25 mm nominal bore |
| 116 | 40 mm nominal bore |
| 117 | 50 mm nominal bore |
| 118 | Easing & adjusting doors, windows & ventilators by sawing including oiling the hinges etc. complete as per direction of Engineer-in-Charge. |
| 119 | Providing & fixingPVC Water tank coverapproved quality all complete as per the direction of EIC. |
| 120 | Deduction for taking into possession of dismantled damaged unserviceable material in all complete as per directiion of Engineer-in-charge. |
| 121 | CP Brass/ brass bib cock / stop cock/pillar cock/ angle valve etc. |
| 122 | 15 to 65 mm nominal bore G.I pipes |
| 123 | Gate valve |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
