Military Engineer Services-MES has published Tender For Certain Repair To Otm Accommodation Of Sata Bty, Asc Bn, Mdc, And 91 Fd Regt In The Area Of Age Br-Ii Under Garrison Engineer Amritsar Cantt. Submission Date for this Tender is 24-05-2024. Building Work Tenders in amritsar Punjab. Bidders can get complete Tender details and download the document.
| FileName | File Description | File Size |
| 52d91e40-003e-40c9-85c5-6dc5d82a5476.html | Tender Notice | 0 KB |
| BOQ_730058.xls | Tender Document | 0 KB |
| TENDER26.pdf | Tender Document | 0 KB |
| Tendernotice_1.pdf | Tender Document | 0 KB |
| Sl. No. | Item Description |
| 1 | Taking down cement plaster of any description on brick walls, etc including raking out joints, hacking for key scrubbing down with water etc ; Complete all as specified and directed by Engineer-in-charge. |
| 2 | Material and Labour for rendering 15 mm thick on fair faces of brick work or concrete surfaces on walls in CM 1:6 finishing even and smooth without using extracement ; Complete all as specified and directed by Engineer-in-charge. |
| 3 | Material and Labour for rendering 15 mm thick on fair faces of brick work or concrete surfaces on walls in CM 1:4 finishing even and smooth without using extracement ; Complete all as specified and directed by Engineer-in-charge. |
| 4 | Material and Labour for rendering 10 mm thick on fair faces of brick work or concrete surfaces on ceiling in CM 1:3finishing even and smooth without using extracement; Complete all as specified and directed by Engineer-in-charge. |
| 5 | Demolitionof brickwork, built in cement mortar including all quoins, arches, pillars, etc.; Complete all as specified and directed by Engineer-in-charge. |
| 6 | Material and Labour forbrick work with sub class "B" bricks (old size) straight or curved on plan exc 6 m mean radius, built in CM1:4; Complete all as specified and directed by Engineer-in-charge. |
| 7 | All as per Srl item No 6 above but except bricks (old dismantled serviceable bricks obtained from Srl item No 5 shall be reused after necessary cleaning of mortar). |
| 8 | Material and Labour forbrick work with sub class "B" bricks (old size) straight or curved on plan exc 6 m mean radius, in half brick thick walls and built in CM1:4; Complete all as specified and directed by Engineer-in-charge. |
| 9 | Material and Labour for applying two coats of whitewash on wall including preperation of newly plastered/old decorated surfaces; Complete all as specified and directed by Engineer-in-charge. |
| 10 | Material and Labour for applying two coats of whitewash on ceiling including preperation of newly plastered/old decorated surfaces; Complete all as specified and directed by Engineer-in-charge. |
| 11 | Material and Labour preparation of newly plastered surface of wall and applying two coats cement base paint over a coat of primer to match the existing treatment; Complete all as specified and directed by Engineer-in-charge. |
| 12 | Material and labour preparation of newly plastered/old decorated surface of wallandapplying two coats of oil bound distemper with necessary putty filling; Complete all as specified and directed by Engineer-in-charge. |
| 13 | Material and labour preparation of newly plastered/old decorated surface of ceilingandapplying two coats of oil bound distemper with necessary putty filling; Complete all as specified and directed by Engineer-in-charge. |
| 14 | Taking down Chowkats or frames from the opening of size not exceeding 1.5 sqm each with shutters ( without taking off shutters from the frames); Complete all as specified and directed by Engineer-in-charge. |
| 15 | Taking down Chowkats or frames from the opening of size exceding 1.5 Sqm but not exceding 4 Sqmeach with shutters ( without taking off shutters from the frames); Complete all as specified and directed by Engineer-in-charge. |
| 16 | Taking down Shutters of any description of size not exc 1sqm each; Complete all as specified and directed by Engineer-in-charge. |
| 17 | Taking down Shutters of any description of size exceeding 1 sqm and not exceeding 2 sqm each; Complete all as specified and directed by Engineer-in-charge. |
| 18 | Taking down Wooden Shutters of any description of size exceeding 1 sqm and not exceeding 2 sqm each and refixing in the same opening after necessary easing and resucring with new SS butt hinges and new screws; Complete all as specified and directed by Engineer-in-charge. |
| 19 | Materialand Labourfor Boxtypesteelwindowmade ofERW tube P- sectionof size 60 mmx25mm double rebated outer frame,comprises glazedskelton &gauzed shutterof ERW tube P-Section size 50mm x 20mmwith one/two Nos openable leaffor each shutter consisting of two Nos Sashbar of T-section 20 x 3 mmwelded to frame with one No verticle mullion of ERW box type T Section of size 60mm x 25mm and FI 2mm thick welded/screwed to frame for fixing of glass including fittings and fixture like as Handle, Tower Bolt, Stopper, Cleat, Pintal hinges, holdfast etc as given belowall as shown on drg No CEJZ/TD-1020/08Sh 1/3 to 3/3 dt 01 May 2008 complete all as specified and directed.(a) Hold fast 150mm long of 12mm x 3mm MS flat- 4 Nos per Window.(b) Handle of Z section 20mm x 25mm, 100mm long- 01 No per leaf.(c) MS tower bolt 150mm long - 02 Nos/leaf.(d) Z Section stopper 20mm x 25mm, 100mm long - 01 No per leaf.(e) Cleat 55mm long of hollow square 15mmx12mm - 02 Nos per leaf.(f)MS pintol hinges size 75mmx12mm - 2 Nos per leaf Note :- Sheet glass, wire mesh and painting shallbe measured and paid sperately. |
| 20 | Material and Labour for Box type steel ventilator made of ERW tube P-section of size 60mmx25mmouterframe ( single rebated), comprisesglazed shutter, frame of ERW tube and FI 2mm thick welded/screwed to frame for fixing ofsheet glassincluding fixture and fittingslike as Stopper, Cleat, Pintal hinges, holdfast etc all as shown on drg No CEJZ/TD1019/08 sheet 1/3 to 3/3 dt 01 May 2008; Complete all as specified and directed by Engineer-in-charge. NOTE:-Sheet glass and painting shall be measured and paid Separately. |
| 21 | Supply and Fixing pressed steel frames 1.25mm thick for door size of frame 125 x 60mm with one or more rebates including necessary fixing lugs, hinges, lock strike plate and tarring to inner surface (surface in contact with concrete/brick surface) of chowkats and hinges; Complete all as specified and directed by Engineer-in-charge. |
| 22 | Material and Labour for PCC 1:2:4 type B-0 (using 12.5 mm graded stone aggregate) in bed blocks for hold fast & similar work etc complete all as specified and directed |
| 23 | Supply and Fixing solid PVC door frame of size 50 x 47 mm made out of 5 mm plain colour PVC sheet reinforced with MS square tube incl taking down old frame any type; Complete all as specified and directed by Engineer-in-charge. |
| 24 | Supply and Fixing Factory made solid panel PVC door shutter 30 mm thick (style)consisting of frame made out of MS tubes for top & bottom rails MS frame shall be convered with heat moulded plain colour PVC `C"channel having a PVCsheet strip of 20 mm width stuck inside with solvant cement for stiles and plain colour PVC sheet top rail, lock rail and bottom rail on either side and as gap insert of top rail and bottom rail; paneling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles and raials with suitabale PVC sheet beading, and jointed together with solvant cement, fixing in the frame at side as per specification and drawingcomplete all as specified and directed; Complete all as specified and directed by Engineer-in-charge. |
| 25 | Supply and Fixing framed work as door, chowkhats, andGrill gates of angle frame work fixed with Nut & bolt to wall or other section complete drilling or fixing welding be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittingsand hanging also festering and fixing; Complete all as specified and directed by Engineer-in-charge. |
| 26 | Supply and Fixing Steel rolling shutters(1.25mm thick sheet), with ball bearing, as specified including top cover, anchoring rod, hasp and staple and one shop coat of primer; erected in position as indicated,push pull or manual type; Complete all as specified and directed by Engineer-in-charge. |
| 27 | Supply and Fixing Ball bearing for rolling shutters; Complete all as specified and directed by Engineer-in-charge. |
| 28 | Supply and Fixing Safety lever locks mild steel with 4 levers; Complete all as specified and directed by Engineer-in-charge. |
| 29 | Supply and Fixing IInd class hard wood Glazed and skeleton shutters 35mm thick divided into square, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc., sizes of members of shutters as specified in SSR Part I, Section 8 clause 8.24 (a) ; supplied and fitted to chowkats; Complete all as specified and directed by Engineer-in-charge. |
| 30 | Supply and Fixing factory made 35 mm thick flush shutters solid core construction with block board core and plywood face panels; Complete all as specified and directed by Engineer-in-charge. |
| 31 | Supply and Fixing powder coatedaluminium frame for doors ,windows, ventilators with one or more rebates including joining cleats for fixing complete all as specified and directed by Engineer-In-Charge.( Min. thickness of powder coating 50 micron) |
| 32 | Supply and Fixing Providing and fixing powder coated(Min thickness of powder coating shall be 50 micron) aluminum windows shutter of size min 18mmx50mm for sliding type windows of standard tubular sections of approved make having glazed panels or glazed and gauzed panels of appropriate size running on seperate tracks in the channel conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth,rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. All the panels shall be of appropriate size having overlaps as required and including all required beadings, clips, rollers, rubber gaskets, cleats, etc. complete and powder coating in approved shade and colour. Note:- Each panel shall be measured separetely. Glass pane and wire mesh shall be measured and paid separetely; Complete all as specified and directed by Engineer-in-charge. |
| 33 | Supply and Fixing Aluminiumpowder coated (of any colour) window and ventilator shutters, fixed type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc.; Complete all as specified and directed by Engineer-in-charge. .(Min. thickness of powder coating 50 micron) |
| 34 | Supply and Fixing powder coated aluminium glazedshutter(for doors) Al-section weighing 0.55 kg/ m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading. ( Min. thickness of powder coating 50 micron); Complete all as specified and directed by Engineer-in-charge. |
| 35 | Supply and Fixing Sheet glass, 5.5mm thick ordinary quality, in squares,exceeding 0.50 sqm in each pane including rubber packing and aluminium beading with and incl solar control film 25 Micron reflective type sticked to glass panes as per instructions of manufacturer; Complete all as specified and directed by Engineer-in-charge. |
| 36 | Supply and Fixing 10mm thick PVC insulation panels with EPS stuck to 1mm printed PVC sheet suitably placed in aluminium door as per specification and drawing; Complete all as specified and directed by Engineer-in-charge. |
| 37 | Supply and Fixing Helical door spring 300mm, ordinary rat tail rod pattern springs, including roller and roller plate fixed to iron chowkats with weilding; Complete all as specified and directed by Engineer-in-charge. |
| 38 | Supply and Fixing in repairs door closer hydraulically regulated, (Alminium die cast body) designation No. 3, universal type, suitable for door shutters of 851 to 1000mm in width and of weightbetween 61 to 80 Kg and fixed; Complete all as specified and directed by Engineer-in-charge. |
| 39 | Supply and Fixing Double actionfloor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloysheet foundation box,main body with stainless steel cover, governing pivot made of brass,other parts made of mild steel heavy duty and fixed; Complete all as specified and directed by Engineer-in-charge. |
| 40 | Supply and Fixing Floor door stopper of aluminium alloy body and tongue anodised with hard drawn steel spring fixed to door shutter of size 140mm; Complete all as specified and directed by Engineer-in-charge. |
| 41 | Supply and FixingBrass mortice lock, 4 levers, verticle type, size 100 mm,; Complete all as specified and directed by Engineer-in-charge. |
| 42 | Material and Labour two coats of synthetic enamel painting on steel surfaces of any description over 10 cm in width or girth not otherwise described above priming coat of red oxide including prepration of previously untreated surfaces; Complete all as specified and directed by Engineer-in-charge. |
| 43 | Material and labour for preparation of old painted steel surfaces of any description, exceeding 10 CM width or grithand applying one coat of synthetic enamel paint; Complete all as specified and directed by Engineer-in-charge. |
| 44 | Material and Labour two coats of synthetic enamel painting on wooden surfaces of any description over 10 cm in width or girth not otherwise described above pink primer including prepration of previously untreated surfaces; Complete all as specified and directed by Engineer-in-charge. |
| 45 | Material and labour for preparation of old painted wooden surfaces of any description, over 10 centimetre width or girth and applying one coat of synthetic enamel paint; Complete all as specified and directed by Engineer-in-charge. |
| 46 | Supply and Fixing Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples ; Complete all as specified and directed by Engineer-in-charge. |
| 47 | Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads in wooden/steel window; Complete all as specified and directed by Engineer-in-charge. |
| 48 | Supply and Fixing clear glass, 3mm thick ordinary quality, in any shape, not exceeding 0.50 sqm in each pane includingand glazing with oil putty. ; Complete all as specified and directed by Engineer-in-charge. |
| 49 | Supply and Fixing figured glass pin head type, 3mm thick ordinary quality, in any shape, not exceeding 0.50 sqm in each pane includingand glazing with oil putty; Complete all as specified and directed by Engineer-in-charge. |
| 50 | Supply and Fixing 300mm long Aluminium alloy, Anodised, sliding door bolt with hasp, staple ( bolt type) and fixing clips of sheet , cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed; Complete all as specified and directed by Engineer-in-charge. |
| 51 | Supply and Fixing Aluminium, anodised, barrel tower bolts 150mm of extruded section and fixed; Complete all as specified and directed by Engineer-in-charge. |
| 52 | Supply and Fixing 150mm longAluminium handles, cast type anodised. ; Complete all as specified and directed by Engineer-in-charge. |
| 53 | Supply and Fixing stainless steel butt Hinges, 100mm size, medium weight, cold rolled mild steel; Complete all as specified and directed by Engineer-in-charge. |
| 54 | Dismantling floor, hearth or wall tiling including cement mortar bedding ( but not backing), removing serviceable tiles to store and rubbish off the premises; Complete all as specified and directed by Engineer-in-charge. |
| 55 | Supply and Fixing non skid ceramic light coloured tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm in floors etc set and jointed in neat cement slurry and pointed in white or colour cement to match the colour of tiles over and including 15mm thick screed bed in CM 1:6 &; Complete all as specified and directed by Engineer-in-charge. |
| 56 | All as per Ser item No 55 here-in-before but as in skirting over 10mm thick cement plaster in 1:4; Complete all as specified and directed by Engineer-in-charge. |
| 57 | Material and Labour for Vitrified ceramic light shade tiles 10mm thick (Square/ rectangular) polished, area of each tiles n.exc 0.36 sqm in floors and skirting etc set and jointed in neat cement slurry and pointed in white or coloured cement to match including screed bed or bedding layer of cement mortar(1:6) 15mm thick for laying floor finishes; Complete all as specified and directed by Engineer-in-charge. |
| 58 | All as per Ser item No 57 here-in-before but as in skirting over 10mm thick cement plaster in 1:4; Complete all as specified and directed by Engineer-in-charge. |
| 59 | Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust , etc. and Brushing neat cement slurry with 3.0 Kg of cement per Sqm; Complete all as specified and directed by Engineer-in-charge. |
| 60 | Material and Labour for Machine cut Kota stone slab flooring 20-25 mm thick (size not less than 0.5 sqm each) over cement screed baseof 20mm thick in CM 1:6 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified |
| 61 | All as per srl Item No 60 here-in-before but as skirting/dado over rendering 15mm thick in CM 1:4; Complete all as specified and directed by Engineer-in-charge. |
| 62 | Supply and Fixing glazed ceramic coloured tiles 450x300mmx6mm thick, etc. on vertical surfaces such as skirting , dados and risers to steps etc. set and jointed in neat cement slurry and pointed in white cement mixed with pigment to match over and including 10mm thick rendering plaster in CM 1:4 on brick surface; Complete all as specified and directed by Engineer-in-charge. |
| 63 | Supply and Fixing in repairs vitreous ChinaSquatting pan "Orrisa" pattren size 580x440mm white with integral foot rest and PVC(SWR) "P" trap 110/110mm bore complete. Note:-Rate of supply for Flushing cistern, flush pipe, seat cover etc have been taken separately; Complete all as specified and directed by Engineer-in-charge. |
| 64 | Supply and Fixing of Vitreous china wash down water closet pan( pedestal pattern), white; Complete all as specified and directed by Engineer-in-charge. Note:-Rate of supply for Flushing cistern, flush pipe, seat cover etc have been taken separately. |
| 65 | Supply and Fixing in repairs 10 Ltr capacity PVC valveless symphonic action type flushing cistern white low level with ball valve flote handle including bracket and flush pipe of polythylene of low or high density or PVC,32mm dia; Complete all as specified and directed by Engineer-in-charge. |
| 66 | Supply only Plastic water closet seat,white/ivory,closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device (Toilet Seat Cover); Complete all as specified and directed by Engineer-in-charge. |
| 67 | Supply and Fixing in repairs PVC Jet spray suitable for EWC. Make-Prayag/Polytuf; Complete all as specified and directed by Engineer-in-charge. |
| 68 | Supply and fixing Chromium plated Health faucet in repairs with 1.5 metre long chain; Complete all as specified and directed by Engineer-in-charge. |
| 69 | Supply and Fixing in repairs vitreous China wash basinwhite,flat back size550x400mm including PTMT waste coupling 32mm bore,waste PVC pipe complete,CP brass Pillar Tap 15mm bore; Complete all as specified and directed by Engineer-in-charge. |
| 70 | Supply and Fixing in repairs glass shelve assembly 60cm in oval shape consisting 5.5mm to 8mm thick glass including CP guard railing with double rail; Complete all as specified and directed by Engineer-in-charge. |
| 71 | Supply and Fixing PVC connection 15mm size with PTMT nuts of length 600mm; Complete all as specified and directed by Engineer-in-charge. |
| 72 | Supply & Fixing vitreous china urinal half stall type with CP spreader white incl CP waste coupling with grating and union fordischarge pipe, including providing and fixing plug, bedding urinal against wall in cement mortar 1:2 securing urinal to plugs with and including 60 mm long brass screws, pointing around urinal back in cement fixing with brackets, flush pipe, grating and union for discharge pipe; Complete all as specified and directed by Engineer-in-charge. |
| 73 | Supply & Fixing rotational moulded polythene water storage tanks of 1000 litre capacity (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part-1 including Ball valves high pressure PTMT with epoxy coated Aluminium rod & High density plastic ball screwed for iron pipe and fixed to GI pipe of 20mm bore including taking down; Complete all as specified and directed by Engineer-in-charge. |
| 74 | Supply & Fixing rotational moulded polythene water storage tanks of 500 litre capacity (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part-1 including Ball valves high pressure PTMT with epoxy coated Aluminium rod & High density plastic ball screwed for iron pipe and fixed to GI pipe of 20mm bore including taking down; Complete all as specified and directed by Engineer-in-charge. |
| 75 | Supply and Fixing 15mm bore tubes (medium grade) galvanised with all fittings and fixed to walls and ceiling or laid in floors complete including taking down; Complete all as specified and directed by Engineer-in-charge. |
| 76 | Supply and Fixing 20mm bore tubes (medium grade) galvanised with all fittings and fixed to walls and ceiling or laid in floors complete including taking down ; Complete all as specified and directed by Engineer-in-charge. |
| 77 | Supply and Fixing in repairs15mm bore Concealed type stop cock cast copper alloy CP screweddown high pressure with crutch or butterfly handle; Complete all as specified and directed by Engineer-in-charge. |
| 78 | Supply and Fixing in repairs15mm bore type anglecock cast copper alloy CP screweddown high pressure with crutch or butterfly handle; Complete all as specified and directed by Engineer-in-charge. |
| 79 | Supply and Fixing in repairs of brass cromium brass plated fancy type bib taps 15 mm bore long nose screwed down screwed for iron pipe or for brass; Complete all as specified and directed by Engineer-in-charge. |
| 80 | Supply and Fixing in repairs Pillar taps 15mm bore, cast copperalloy , with capstan heads, chromium plated , screwed down high pressure , with or without l"ettered " "HOT" or "COLD" with long screwed shanks and fly-nuts , screwed for iron pipe and fixed; Complete all as specified and directed by Engineer-in-charge. |
| 81 | Supply and Fixing in repairs PVC wastepipe32mm dia fixed to WHB/Urinals; Complete all as specified and directed by Engineer-in-charge. |
| 82 | Supply and Fixing in repairs 100mm dia CP grating with or without hole type; Complete all as specified and directed by Engineer-in-charge. |
| 83 | Supply and Fixing in repairs 600mmx450mm bevelled edge mirror of selected quality glass,mounted on 6mm thick commercial plywood incl all around teak wood beading and fixed to wall; Complete all as specified and directed by Engineer-in-charge. |
| 84 | Supply and Fixing in repairs CP brass towel rail of 20mm dia and 600mm long; Complete all as specified and directed by Engineer-in-charge. |
| 85 | Supply and Fixing in repairs 125mm CP shower rose fancy type with CP arm; Complete all as specified and directed by Engineer-in-charge. |
| 86 | Taking down eaves gutters and rain water pipes ( any size or pattern) , including all fittings , heads, shoes, bends, swan necks, etc., including cleaning or refixing or removal to store ( measured overall as fixed along the centre line over fittings and accessories; Complete all as specified and directed by Engineer-in-charge. |
| 87 | Supply and Fixing 110mm bore PVC(SWR) pipes single socketed in any lengthfixed to walls with dash true nut and bolt at every 2mtr length including)includingall fittings complete all as specified and directed by Engineer-in-charge |
| 88 | Supply and Fixing 110mm bore PVC(SWR) pipes single socketed in any lengthlaid in trenches with dash true nut and bolt at every 2mtr length including)includingall fittings complete all as specified and directed by Engineer-in-charge |
| 89 | Supply and Fixing 75mm bore PVC(SWR) pipes single socketed in any lengthfixed to walls with dash true nut and bolt at every 2mtr length including)includingall fittings complete all as specified and directed by Engineer-in-charge |
| 90 | Supply and Fixing 75mm bore PVC(SWR) pipes single socketed in any lengthlaid in trenches. with dash true nut and bolt at every 2mtr length including)includingall fittings complete all as specified and directed by Engineer-in-charge |
| 91 | Supply and Fixing 110mm PVC (SWR) bends any radius with access door; Complete all as specified and directed by Engineer-in-charge. |
| 92 | Supply and Fixing 75mm PVC (SWR) bends any radius with access door; Complete all as specified and directed by Engineer-in-charge. |
| 93 | Supply and Fixing 75mm PVC floor trap; Complete all as specified and directed by Engineer-in-charge. |
| 94 | Demolition reinforced roofs, floors (other than ground floors), beams staircases, landing, chajjas and similar suspended work (reinforcement cut as required to facilitate demolition); Complete all as specified and directed by Engineer-in-charge. |
| 95 | Material and Labour for reinforced Cement concrete 1:2:4 type B-1 (using 20mm graded stone aggregates) as in chajjas, fascia, slab and the like; Complete all as specified and directed by Engineer-in-charge. |
| 96 | Use and waste of formwork to Chullah hoods, chajjas, weather shades, corbels, water troughs and similar items including edges rough finished surfaces of concrete; Complete all as specified and directed by Engineer-in-charge. |
| 97 | Supply and Fixing mild steel TMT bars 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire ( annealed) not less than 0.90 mm dia. Or securing with clips; Complete all as specified and directed by Engineer-in-charge. |
| 98 | Demolition of Stone slabs and tiles of any description or thickness in floors, aprons etc.Laid, bedded and pointed in any mortar; Complete all as specified and directed by Engineer-in-charge. |
| 99 | Material and Labour Granite (of any type) work (table rubbed and polished) 20 mm thick in steps , jambs, pillars, window cills, cooking plateforms and like in cemnet mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite over and including 15mm thick rendering in CM 1:4; Complete all as specified and directed by Engineer-in-charge. |
| 100 | Material and Labour green Marble work 18 to 20mm thick (table rubbed and polished) in steps, jambs, pillars, windowcills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble shade over and including 15mm thick cement screed bed in CM (1:4), set and jointed with grey cement slurry mixed with pigment to match with shade of marble including grinding, rounding to edges and polishing; Complete all as specified and directed by Engineer-in-charge. |
| 101 | Dismantling Brick tiles or terracing tiles, single layer on roofs; Complete all as specified and directed by Engineer-in-charge. |
| 102 | Demolition mud in roofs, any thickness, including plastering and leeping (whether full thickness removed or only a part thereof) complete all as specified and directed by Engr-in-Charge |
| 103 | Material and Labour for PCC 1:2:4 type B-1 (using 20mm graded stone aggregates) as in padding concrete fair finish avg 50mm thick, roof kerbs or mud stops, rounded or chamfered on edges and like including weathering slight rounded and throating; Complete all as specified and directed by Engineer-in-charge. |
| 104 | Material and Labour for applying evenly a tack coat of industrial bitumen 85/25 grade @ 1.2 Kg/Sqm including cleaning surfaces etc; Complete all as specified and directed by Engineer-in-charge. |
| 105 | Supply and Fixing (minimum) 3mm thick APP film based poly meric membrance minimum weighing 3Kg per Sqm reinforced with polyester non wove fabric (weight not less than 150 gms/sqm) land on primed surface by forced applicationalong the length of100mm lapping strip to either sides and sealed in after cleaning down the roof by brooms; Complete all as specified and directed by Engineer-in-charge. |
| 106 | Material and Labour for 40 mm thick brick tiles laid on 15mm thick cement mortar 1:6 and joints grouted flush in cement mortar ( 1:3) mixed with 5 % of crude oil by weight of cement; Complete all as specified and directed by Engineer-in-charge. |
| 107 | All a per Srl item no 106 here-in-before but except tiles (old serviceable tiles obtained from dismantling) shall be reused after necessary cleaning of mortar) ; Complete all as specified and directed by Engineer-in-charge. |
| 108 | Demolition of cement Concrete in sunken floors exc 15cm thick ( above ground level) and disposing the rubbish to a distance exceeding 50 Mtr but not exceeding 100 Mtr away to low lying areas; Complete all as specified and directed by Engineer-in-charge. |
| 109 | Material and Labour for rendering 15 mm thick on fair faces of brick work or concrete surfaces on walls in CM 1:4 with water proofing compound @2% weight of cement and, finishing even and smooth without using extracement; Complete all as specified and directed by Engineer-in-charge. (WPC shall be measured and paid separatly). |
| 110 | Supply only integral water proofing compound; Complete all as specified and directed by Engineer-in-charge. |
| 111 | Material and Labour for Cement concrete 1:7:12 type F-2 (using 40mm graded brick aggregates) asin foundations, filling and mass concrete; Complete all as specified and directed by Engineer-in-charge. |
| 112 | Material and Labour for 25mm thick PCC 1:2:4 type B-0 (using 12.5mm graded stone aggregates) as in sunken portion; Complete all as specified and directed by Engineer-in-charge. |
| 113 | Material and Labour for cleaning of dust & dirt , Removal of all loose existing bituminous material or with chipper & applying heat torch gun to get smooth plain finished surface. repairs all joints & cracks with Highly Elastic bituminous Cold applied Putty-Tarplast- having penetration after setting upto 8mm & confirming to IS 1580:1991. Any annular space between drain pipe and concrete should be filled with mortar admixed with Shali SBR latex of STP Ltd. Making necessary Gola 75x75 mm with rich cement mortar admixed with ShaliSBR latex of STP Ltd at the interface of horizontal & Vertical junctions; Complete all as specified and directed by Engineer-in-charge. |
| 114 | Demolition of cement concrete in ground floors and paving not exceeding 15 cm thickness ( below or above ground level) and disposing the rubbish to a distance exceeding 50 Mtr but not exceeding 100 Mtr away to low lying areas; Complete all as specified and directed by Engineer-in-charge. |
| 115 | Material and Labour for 50mm thick PCC 1:3:6 type C-1(using 20mm graded stone aggregate as in plinth protection Finishing fair and even; Complete all as specified and directed by Engineer-in-charge. |
| 116 | Dismantling boarding , any description , fixed in any position with screws. ; Complete all as specified and directed by Engineer-in-charge. |
| 117 | Supply and Fixing GI frame work for seameless ceiling comprising of GI perimeter channel 0.55 mm thick with two unequal flanges of 20 and 30mm and web of 27mm fixed to surrounding wall using nylon sleeves and screws as 450mm centre to centr/ intermediate channel 0.9mm thick having two equal flanges of 15mm each and web of 45 mm suspended from soffit at approx 900mm centre to centre with GI cleat and steel expansion fasteners with and including ceiling section (not exc 1.2m length) of 0.55 mm thickness having kurled web of 50mm and flange of 26mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457mm centre to centre and Material and Labour forProviding and fixing Gypsum board 12 mm thick in ceiling fixed with screw as per manufacturers instructions incl preparation of new surfaces & applyingtwo coat of OBD on ceiling over chalk whitening ; Complete all as specified and directed by Engineer-in-charge. |
| 118 | Supply and Fixing in repairs 25mm dia stainless steel Curtain rods/ rails,with brackets, stops, rollers, finials, 1 pair of decorative knobs for each curtain rod etc; Complete all as specified and directed by Engineer-in-charge. |
| 119 | Taking down aluminium door shutters of area exc 1 sqm but n.exc 2 sqm each and replacement of necessary jointing cleats glazing clips, rubber packing, anodised aluminium snap beading screws etc and refixing in the same opening; Complete all as specified and directed by Engineer-in-charge. |
| 120 | Taking down aluminium door shutters of area not exc 1 sqm each window shutters and replacement of necessary jointing cleats glazing clips, rubber packing, anodised aluminium snap beading screws etc and refixing in the same opening; Complete all as specified and directed by Engineer-in-charge. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
