Military Engineer Services-MES has published Tender For Repairs And Maintenance To Flooring, Roofing, Tiling In Otm Accommodation Of Various Unit At Age Br-Ii Under Ge Dinjan. Submission Date for this Tender is 24-05-2024. Shed Construction Tenders in dinjan Assam. Bidders can get complete Tender details and download the document.
| FileName | File Description | File Size |
| 1201006f-96ff-4493-9921-a959848fd00c.html | Tender Notice | 0 KB |
| BOQ_730167.xls | Tender Document | 0 KB |
| CREDIT8672.pdf | Tender Document | 0 KB |
| TENDERDOCUF8672.pdf | Tender Document | 0 KB |
| Tendernotice_1.pdf | Tender Document | 0 KB |
| Sl. No. | Item Description |
| 1 | Demolition of brickwork or stone/ boulder masonry, built in Cement mortar or cement lime mortar including all quoins, arches, pillars, etc, but excluding ashlars facings, dressed stonework and precast concrete articles complete all as specified and as directed. |
| 2 | M&L for brick work with sub class "B" bricks straight or curved on plan exceeding 6 m mean radius built in cement mortar (1:6) complete all as specified and as directed. |
| 3 | M&L for brick work with sub class ‘B’ bricks, straight or curved on plan to any radius in half brick thick walls built in cement mortar in (1:4) complete all as specified and as directed |
| 4 | Demolition of unreinforced cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed |
| 5 | M&L for plain cement concrete (1:4:8),type D2 (using 40 mm graded stone aggregate) as in foundation, filling and mass concrete complete all as specified and as directed. |
| 6 | M&L for 75 mm thick plain cement concrete (1:3:6), type C2 (using 40mm graded stone aggregate) as in sub base of floor, etc complete all as specified and as directed. |
| 7 | M&L for 75 mm thick plain cement concrete (1:3:6), type C1, (using 20mm graded stone aggregate) as in plinth protection, finishing surface even and smoothwithout using extra cement, complete all as specified and as directed |
| 8 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed |
| 9 | M&L for non-skid coloured ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm, as in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15 mm thick screed bed or bedding layer of cement mortar in (1:6) for laying floor finishes complete all as specified and as directed |
| 10 | M&L for non-skid coloured ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, as in skirting etc. over 10 mm thick back coat of cement mortar in (1:4),set and jointed in neat cement slurry and pointed in white or colour cement to match over complete all as specified and as directed. |
| 11 | M&L for coloured glazed ceramic tiles in vertical surface of size 450X 300X 7 mm thick over 10 mm thick back coat of cement mortar in (1:4)set and jointed in neat cement slurry and pointed in white or colour cement to match complete all as specified and as directed. |
| 12 | M&L for vitrified ceramic tiles light shade, 10mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 Sqm, in floors etc, set and jointed in neat cement slurry and pointed in white or colour cement to match over 15 mm thick screed bed or bedding layer of cement mortar in (1:6) for laying floor finishes complete all as specified and as directed. |
| 13 | M&L for vitrified ceramic tiles light shade, 10mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 Sqm, in skirting etc, set and jointed in neat cement slurry and pointed in white or colour cement to match over 10 mm thick back coat of cement mortar in (1:4) complete all as specified and as directed. |
| 14 | M&L for prepolished, chequered cement concrete tiles of size 25cmx25cmx22mm thick, as in floors etc,including 15 mm thick screed bed or bedding in cement mortar (1:6) and set and jointedin neat cement slurry and pointed in grey cement and pigments to match with the shade of tiles complete all as specified and as directed. |
| 15 | M&L for Machine Cut Kota Stone Slab 20-25mm thick as in Floor, etc. over and including Screed Bed or Bedding Layer 20mm thick in Cement Mortar (1:6), Laid and Jointed with Grey Cement Slurry mixed with Pigment to match the Shade of the Slab including Rubbing and Polishing, complete all as specified and as directed by the Engr-in-Charge. |
| 16 | M&L for machine pressed precast conctete interlocking paver block, design & shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade with grey cement and pigment including 50 mm thick average compacted bed of coarse sand, filling the joints with fine sand etc. complete all as specified and as directed. |
| 17 | M&Lfor granite (of any type) tiles 18-20mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete over 15mm thick screed bedin cement mortar (1:4) complete all as specified and as directed. |
| 18 | Taking down cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc complete all as specified and directed. |
| 19 | M&L for rendering 15 mm thick in cement mortar (1:6) on other than fair faces of brick masonry or concrete surfaces and finishing the surfaces even and smooth without using extra cement complete all as specified and as directed. |
| 20 | M&L for rendering 15 mm thick on fair faces of external wall of brick work or stone surfaces in two layers (10 mm and 5 mm thick) in cement mortar (1:4) using water proofing compound in top layer (water proofing compound measured as separately) andfinished even and smooth without using extra cement complete all as specified and directed. |
| 21 | Supply only water proofing compound complete all as specified and directed. |
| 22 | Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed |
| 23 | M&L for Reinforced Cement Concrete (1:2:4), type B-1 (Using 20 mm graded stone aggregate) as in slab supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves etc complete all as specified anddirected. (Note : reinforcement shall be measured and paid separately against respective item). |
| 24 | S&F TMT steel bars 10 mm dia., and over cut to length, bend to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips quality complete all as specified and directed. |
| 25 | Use and waste form work to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200 mm thick (Horizontal or sloping) for flat rough finished surfaces of concrete complete all as specified and directed. |
| 26 | Use and waste formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs and sides of RCC/PCC bands in walls, horizontal or sloping and similar work exc 5cm but n exc 10cm wide Rough finished surface of concrete, flat complete all as specified and as directed. |
| 27 | Dismantling of framework timber scantling 40Sqcm and over in section, fixed in any position complete all as specified and as directed. |
| 28 | M&L for second class hard wood timber scantling, clean swan as in frame work, fixed with nails complete all as specified and directed. |
| 29 | Dismantling of timber boarding, any description, fixed in any position with nails complete all as specified and as directed. |
| 30 | S&F for 18/19mm thick prelaminated particle board, interior grade, one side with decorative choice lamination and other side balancing white lamination, fixed with screws to timber frame works complete all as specified and as directed. |
| 31 | S&F in repairs curtain rails, Harrison rail, aluminium alloy chromium plated with fixing brackets, stops, rollers etc complete all as specified and as directed. |
| 32 | S&F for Stainless steel wire cloth of 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and as directed. |
| 33 | S&F in repairs Stainless steel wire cloth of 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and as directed. |
| 34 | Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or steel frames, concrete or brick surrounds, glazed with putty or fixed with beads complete all as specified and as directed. |
| 35 | S&F for 3 mm thick sheet glass,ordinary quality and glazing with oil puttyin square not exceeding 0.5 Sqm in each pane complete all as specified and as directed. |
| 36 | Dismantling asbestos cement (corrugated or semi corrugated) sheet in roof covering complete all as specified and as directed. |
| 37 | Dismantling of plain or corrugated steel sheeting, any gauge, thickness, in roof covering including ridges and keeping serviceable sheets in safe custody for reuse in the work complete as directed. |
| 38 | S&F 0.63mm thick Galvanised, corrugated mild steel sheeting with two corrugations side lap, fixed with L-type or J-type or cranked hook bolts, in roofs, walls etc. with grade of zinc coating 275 complete all as specified and as directed. |
| 39 | S&F 0.63mm thick, Plain, galvanised, mild steel sheeting, in ridges, hips, valley gutters, drip and straight flashings (length and girth as fixed) with grade of zinc coating 275complete all as specified and as directed. |
| 40 | S&F 6mm thick asbestos cement, two piece adjustable plain angular ridge fixed with L-type or J-type or cranked hook bolts complete all as specified and as directed. |
| 41 | S&F 6mm thick asbestos cement, corrugated sheet or semi-corrugated sheets fixed with L-type or J-type hook in roofs covering complete all as specified and as directed. |
| 42 | S&F 20 mm thick, second class hard wood boarding, clean sawn, planed one side with butt joints and fixed with nails in any situation as in eaves board, etccomplete all as specified and directed. |
| 43 | S&F for pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of profile as approved, any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed. |
| 44 | S&F for pre-painted galvalume aluminium zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in ridges/valley gutter, fixed with self tapping screws complete all as specified and as directed. Note : Colour of ridge shall be same colour as that of sheet used for roof. |
| 45 | Dismantling of wall and ceiling boards (fibre pulp, insulation etc) or insulation boards/slabs of any thickness including cover fillets complete all as specified and as directed. |
| 46 | S&F for 4mm thick, Asbestos cement plain building boards, fixed to timber framework with screws in ceiling surfacecomplete all as specified and directed. |
| 47 | S&F for false ceiling with exposed metal (PPGI) framework/ "Tee" grid providing and fixing of suspended Tee grid false ceiling using "T" grid system - powder coated GI (PPGI) exposed grid false ceiling suspension system in grid size 600mmx600mm with main runner 32mm x 24mm x 0.3mm thick, cross tee 26mm x 24mm x 0.3mm thick and wall angle 24mm x 24mm x 0.40 mm thick using 4mm thick non asbestos fiber cement board of size 595mm x 595mm, and asbestos free fiber cement board manufacturer using high pressure system curing technology. T grid framing is suspended using 4mm GI/MS bar hanger fixed with steel dash fasteners or iron purlin from the roof with adjustment clip, also providing provisions for light fixtures, air conditioning diffusers and ducts, sprinklers, smoke detectors etc. The main runners to be secured to structural soffit by hanger @ 1220mm maximum c/c. The last hanger at the end of each main runner should not be placed at not more than 300mm from the adjacent wall. 1220mm/600mm cross tee to be interlocked between main runners @ 600mm c/c, so as to form 600mm x 600mm or 1200mm x 600mm grid, confirming IS 14862 and type B category III of ISO 8336, tested as per AS 1530 Part-3 & B. S-476 Part 4, 5, 6, 7 & 8 should be placed in grid module to form after and including dismantling of existing false ceiling of any type complete all as specified and as directed. |
| 48 | Taking down the chowkhats or frames not exceeding 1.5 Sqm each (without taking off shutters from the frames) complete all as specified and as directed |
| 49 | Taking down the chowkhats or frames exceeding 1.5 Sqm but not exceeding 4 Sqm each(without taking off shutters from the frames) complete all as specified and as directed |
| 50 | Taking down the shutters of any description not exceeding 1.00 Sqm each complete all as specified and as directed |
| 51 | Taking down the shutters of any descriptionexceeding 1.00 Sqm and not exceeding 2.00 Sqm each complete all as specified and as directed |
| 52 | Taking down shutters of any descrption not exceeding 1.00 Sqm each and refixing in the same opening complete all as specified and directed. |
| 53 | Taking down shutters of any description exceeding 1.00 Sqm but not exceeding 2.00 Sqm each and refixing in the same opening complete all as specified and as directed |
| 54 | Resecuring or easing and adjusting without taking down the shutter of size exceeding 1 Sqm and not exceeding 2 Sqm complete all as specified and as directed. |
| 55 | S&F for second class hard wood plain, solid, straight chowkat and frames, wrought, framed, rebated on the solid rounded or chamfered, put together with glue pinned at joints complete all as specified and as directed. |
| 56 | S&Fpressed steel frames for doors local work shop made of size 105x60mmwith one or more rebates using cold rolled commercial mild steel sheet of 1.2mm thick including providing and fixing necessary lugs, 100mm butt hinges, lock strike plate,shock absorber etcand including PCC filling of hollow section using plain cement concrete (1:3:6) type C1 complete all as specified and as directed. |
| 57 | S&Fpressed steel frames for doors local work shop made of size 125x60mmwith one or more rebates using cold rolled commercial mild steel sheet of 1.2mm thick including providing and fixing necessary lugs, 100mm butt hinges, lock strike plate,shock absorber etcand including PCC filling of hollow section using plain cement concrete (1:3:6) type C1 complete all as specified and as directed. |
| 58 | S&F 35 mm thick, second class hard wood, glazed and skeleton shutters with open rebated and prepared to receive glass, gauze, etc (without sash bars)edges of framing plain, chamfered or rounded, fitted with cut mitered beads for securing glass, etc, sizes of members of shutters as specified in SSR Part I, Section -8, clause 8.24 (a). |
| 59 | S&F 30 mm thick, second class hardwood glazed and skeleton shutters open rebated and prepared to receive glass, gauge, etc, divided in to squares, with plain, chamfered or rounded, mitered and rebated sash bars, any numbers, edges of framing plain, chamfered or rounded as in SSR Part I Section 8 clause 8.24 (b) complete all as specified and as directed.. |
| 60 | S&F35 mm thick, second class hardwood, plain, framed, panelled shutters (any number of panels), with lock rail and panels of 9mm BWR commercial Ply or 12mm thick veneered particle board medium density, with commercial face veneering on both faces. the size of rail and styles 150 & 100mm, kiln seasoned and chemically pressure treated complete all as specified and as directed. |
| 61 | S&F for solid PVC door frames of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube complete all as specified and as directed. |
| 62 | S&F for factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of MS tubes for top & bottom rails.MS frame shall be covered with heat moulded, plain colour PVC "C" channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail, panelling of plain colour 5mm thick PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading and jointed together with solvent cement, complete all as specified and as directed by Engr-in-Charge. |
| 63 | S&F for 100mm size butt hinges, medium weight, cold rolled mild steel complete all as specified and as directed. |
| 64 | S&F 75 mm size stainless steel, butt hinges, medium weight, cold rolled, complete all as specified and as directed. |
| 65 | S&F 150 mm long mild steel pressed handle, oval type, stove enameled blackcomplete all as specified and as directed. |
| 66 | S&F 200mm long mild steel, barrel tower bolts, stove enamelled black, with bright bolt and fixed complete all as specified and as directed. |
| 67 | S&F 150mm long mild steel, barrel tower bolts, stove enamelled black, with bright bolt and fixed complete all as specified and as directed. |
| 68 | S&F 150 mm long, aluminium handles, cast type, anodised complete all as specified and as directed. |
| 69 | S&F 150mm long aluminium, anodised, barrel tower boltsof extruded section complete all as specified and as directed. |
| 70 | S&F for mild steel sliding door bolts, 250mm long, plate type, stove enamelled black, with bright bolts not less than 12mm dia with & including a minimum of 6 boltsand nuts, four on bolt plate and two on staple plate etc complete all as specified and as directed. |
| 71 | S&F for mild steel small articles usingflat iron of size 25x3mm thicksuch asband, strap, hold fast, cleat, support, hook, hinges, base tie for door frame etc and other similar items conforming to Fe-290 (Gde E-165) complete all as specified and as directed. |
| 72 | M&L for plain cement concrete (1:2:4) type B-1 (using 20mm graded stone aggregate) for embedding hold fast, bed block, cills, etcincluding necessary form work complete all as specified and as directed. |
| 73 | Dismantling of wrought iron or mild steel work of any description not otherwise provided for complete all as specified and as directed. |
| 74 | M&L for Mild steelframed work such as grills, gratings, gates etc., with ends of bars shouldered and/or riveted, or forged into spikes, framed guard bar, barred iron doors, ladders, framed balusters, walk ways, railings, framework of water tanks and similar work conforming to Fe-410-0 Gde E-250 complete all as specified and directed. |
| 75 | S&F in repair steel windows with side hung shutters including projecting/box type hinges with steel handle, and steel peg stay complete with glazing bars, devotailed or welded complete all as specified and as directed. |
| 76 | S&F in repair steel windows with side hung shutters including projecting /box type hinges with steel handles and steel peg stay complete without glazing bars, dovetailed or welded complete all as specified and as directed. |
| 77 | S&Fin repair steel ventilators with top hung shutter including two pairs of brass cup pivots, catch spring and pulley wheel complete all as specified and as directed. |
| 78 | Supply and fixing of Anodised aluminium sliding window, three track including following components / specification complete all as specified and directed.(i) Thickness and weight per metre length of aluminium frame and section of shutter all as shown on drawing. (ii) All vercal/ horizontal joint shall be of extruded aluminium section so as to avoid any play between jointed members. (iii) all other accessories such as jointing cleats, glazing clips, rubber neoprene packing, anodised aluminium snap beading, srews, etc. (iv) Stainless steel wire cloth, 036 mm nominal dia of wire and average width of aparture 1.40 mm and fixed with stainless steel wire staples, etc. (v)Sheet glass 4 mm thick selected quality and glazing with oil putty or fixed with wooden beads in square not exceeding 0.5 Sqm in each pane (vi) Rest all as specified in drawing no CEZ/2015/TD/007 Sheet no 1R/5, 2R/5, 3R/5, 4R/5, 5R/5. |
| 79 | Supply and fix infor anodized aluminium frame for door of size 65 X 38mm with anodized aluminium push/ pull glazed type shutter with lock rail , top rail and stiles of size 84 x 44mmand size 115 X 44 for bottom rails and necessary jointing cleats, glazing clips, rubber packing, anodized aluminium snap beading, screws, anodized aluminium handles, including supply and fixing of 5.5mm thick sheet glass, tinted and minimum 4 Nos 100mm size aluminium hinges per shutter complete all as specified and as directed. |
| 80 | S&F for aluminium (extruded section body) door closer hydraulically regulated, designation No.3, universal type suitable for shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed complete all as specified and as directed. |
| 81 | Supply and fixing as in repair double action floor spring hydraulically regulated made up of minimum 1.25mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty all as directed by the Engineer-in-Charge. |
| 82 | M&L for repair of aluminium door including taking down and refixing in same opening with change of broken glass pane etc. necessary jointing cleats, glazing clips, rubber packing, anodized snap beading, screw, complete all as specified and as directed. Note: Glass pane shall be measured and paid separately under relevant items. |
| 83 | S&F for 4 mm thick tintedglass,ordinary quality and glazing with oil puttyin square not exceeding 0.5 Sqm in each pane complete all as specified and as directed. |
| 84 | Taking up or down 15 mm bore steel water tubing galvanised including connections from trenches/wall/floor/ceiling etc and keeping serviceable quantity in safe custody for reuse at same site or other site complete all as specified and as directed. |
| 85 | Taking up or down 20 mm bore steel water tubing galvanised including connections from trenches/wall/floor/ceiling etc and keeping serviceable quantity in safe custody for reuse at same site or other site complete all as specified and as directed. |
| 86 | Supply, laying, connection and testing, 15mm bore, steel water tubing, galvanised, medium grade conforming to IS 1239 (Part -1):2004 with all fittings conforming to IS 1239 (Part -2):2011 and fixturesfixed to walls and ceilings or laid in floors, etc complete all as specified and as directed. |
| 87 | Supply, laying, connection and testing, 20mm bore, steel water tubing, galvanised, medium grade conforming to IS 1239 (Part -1):2004 with all fittings conforming to IS 1239 (Part -2):2011 and fixturesfixed to walls and ceilings or laid in floors, etc complete all as specified and as directed. |
| 88 | Cutting chases, pinning in, making good to facings where required and pointing in cement mortar (1:3) to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth complete all as specified and directed. |
| 89 | S&F in repairs,plastic water closet seat, black, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device complete all as specified and directed |
| 90 | S&F in repairs,PVC low level flushing cistern, 10 litre capacity, valveless, symphonic action type with inlet, ball valve, float and handle incl bracket, PVC conection pipe andflush pipe of polyethylene of low or high density or PVC 32 mm dia complete all as specified and directed |
| 91 | S&F in repairs 20 mm bore, ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed. (minimum weight 20 mm - 210 gms ) complete all as specified and as directed. |
| 92 | S&F in repairs PVC water tank top cover suitable for 250 to 1000 Ltrs capacity complete all as specified and as directed. |
| 93 | S&F in repairs vitreous china wash down water closet pan (pedestal pattern), white, including connection to outgoing drain andflushing pipe, anti syphonic pipe including PVC seat and cover complete but excluding flushing cistern & flush pipe including making good to disturbed surfaces of floor using concrete (1:4:8) type D2 and to match with existing specifications complete all as specified and as directed. |
| 94 | S&F in repairs vitreous China squatting pan, "Orissa"pattern, size 580 x 440 mm white with integral foot rest and "P" or "S" trap, including provision of lime concrete bedding, connection to trap and flushing pipe etc complete including making good to disturbed surfaces of floor using concrete (1:2:4) type B0 and to match with existing specifications complete all as specified and as directed. |
| 95 | S&F in repairs, 32mm /40mm dia x 800mmwaste pipe for sink/wash basin/ uninal hand basin etc complete all as specified and as directed. |
| 96 | S&F in repairs, PTMT(half or full threaded) waste coupling 40mm for sink (min weight 32mm - 45gms/40mm - 60gms) complete all as specified and as directed. |
| 97 | S&F in repair 75mm dia, PVC (SWR) floor trap, plain with gratingincluding jointing with solvent cement to waste pipe fixed in cement concrete type B-1 (1:2:4) complete all as specified and as directed. |
| 98 | S&F for grating doom, circular type, 100mm dia of PTMT, (mimimum weigh 25 gms) complete all as specified and as directed. |
| 99 | S&F in repairs vitreous china wash basin, size 550x400mm, white, flat back, with PVC waste pipe, CP waste coupling, chain, plug and porcelain stopper & brackets including cutting for and pinning in ends of brackets but excluding tap complete all as specified and as directed. |
| 100 | S&F in repairs sheet corner glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and as directed. |
| 101 | S&F in repairs 15 mm bore, bib taps, cast copper alloy, chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and as directed. |
| 102 | S&F in repairs 15 mm bore dia cast copper alloy fancy type, chromium plated stop valves, crewed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and as directed. |
| 103 | S&F in repairs 15mm dia angular stop cock with flange complete all as specified and as directed. |
| 104 | S&F in repairs 15mmstop valves(concealed type),cast copper alloy fancy type chromium plated, long sunk and cup, screwed both ends for iron pipe or for unions and fixed complete all as specified and as directed. |
| 105 | S&F in repairs 15 mm bore, pillar taps, fancy type, cast copper alloy, chromium plated with capstan heads, screwed down high pressure with or without lettered "Hot or Cold" with long screwed shanks and fly nuts, screwed for iron pipe complete all as specified and as directed. |
| 106 | S&F in repair 15mm bore, PVC connection pipe 600mm long with PTMT nuts at both ends complete all as specified and as directed. |
| 107 | S&F in repair 600mmX450mm bevelled edge mirror of selected quality 5mm thick glass, mounted on PVC frame including key hole plates for hanging and fixed to wall with chromium plated cup washers and screws complete all as specified and as directed. |
| 108 | S&F in repair 500 litres capacityrotational moulded polyethylene water storage tanks (cylindrical or vertical with closed top) as per IS 12701:1996, hoisted and fixed in position including provision of 20/15mm bore medium grade pipe for connecting inlet, outlet, overflow and washout pipe incl 20 mm bore, ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed. (minimum weight 20 mm - 210 gms ) complete all as specified and as directed. |
| 109 | S&F in repair 1000 litres capacityrotational moulded polyethylene water storage tanks (cylindrical or vertical with closed top) as per IS 12701:1996, hoisted and fixed in position including provision of 20/15mm bore medium grade pipe for connecting inlet, outlet, overflow and washout pipe 20 mm bore, ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed. (minimum weight 20 mm - 210 gms )complete all as specified and as directed. |
| 110 | S&F in repairs sink with drainage board, made out of stainless steel 1.00mm thick, kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 915x460mm and bowl size 410X330X160mm complete all as specified and as directed. |
| 111 | S&F for stainless steel plate rack 1mm thick, standard quality, size 900 x 900 x 250mm complete all as specified and as directed. |
| 112 | S&F for brass chromium plated shower rose, 125 mm size, with or without swivel joint any size incl fixing to steel pipe or union complete all as specified and as directed |
| 113 | S&F in repair CP health faucet cast copper alloy with push button & 1m long flexible steel pipe with PVC lining suitable for 15mm bore pipe complete all as specified and directed. |
| 114 | S&F in repairs 50mm bore, high density poly-ethylene pipes (HDPE) of pressure rating 6 kgf/cm2 fixed to wall,ceiling or in floors complete all as specified and as directed. |
| 115 | S&F in repair 100 mm bore, CI branch piece, single (equal or unequal)complete all as specified and as directed. |
| 116 | S&F in repair brass chromium plated tubular towel rail, D type, 60cm long, 20mm dia with brackets complete all as specified and as directed. |
| 117 | M&L for preparation of new wooden surface of any description, not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed. |
| 118 | M&L for preparation of new steel surfaces of any description, over 10 cm in width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of zinc chrome red oxide primer complete all as specified and as directed. |
| 119 | M&L for preparation of new plastered surface of walls etc and applying two coats of cement based paints over a coat of alkali-resistant primer paintonwalls complete all as specified and directed. |
| 120 | M&L for preparing newly plastered surfaces ofwalls, etc and applying two coats of distemper oil emulsion over a coat of alkali resistant primer complete all as specified and as directed. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
