Bids Are Invited For Washeries Mse Procurement Of Bucket Elevator Spares For Ccl -1 Bucket Elevator , Size: 1250Mm. Unit No. 208, Bucket & Chain Link Assembly :Each Set Consist Of 57 Sub-Sets And Each Sub-Set Consists Of The Following: ( A ) Bucket, Matl.Is:226 -1No. ( B ) Outer Links, En-45, Forged And Heat Treated - 14 Nos. ( C ) Link Riveted With Bucket, En-45, Forged And Heat Treated -2 Nos. ( D ) Tie Rod, En-8 -2Nos. ( E ) Bush, En-8 -4Nos. ( F ) Split Pin-4 Nos. The Holes Of The Link Should Be Core Hardened. Material Is To Be Supplied In Assembled Condition Of 5 Subset. 1 Set 2 Head Tumbler Assy. Complete Set Fitted With Bearing Block & Bearing No. 22240Cc / W33 For Bucket Elevator Unit No. 208, Size: 1250Mm. 1 Set 3 Complete Liner Set ( Front & Back ) ( Angle + Liner ) For Bucket Elevator Unit No. 208 F / S Length= 51.9 Mtrs., W= 200 Mm X 16 Mm Thickness, B / S Length = 51.9 Mtrs., W = 150 Mm X 16 Mm Thickness, Base Angle F / S 200 Mm X 100 Mm X 10 Mm, B / S 150 Mm X 80 Mm X 10 Mm, Length Similar To Liner Length And Holes To Be Provided For Fastening In Set ( For 1250 Mm Be ) 1 Set 4 Tail Tumbler Assy. Complete Set Fitted With Side Covers & Brass Bush For Bucket Elevator Unit No. 208 , Size: 1250Mm. 1 Set 5 Bucket Elevator, Size:800Mm. Unit No. 207, Bucket & Chain Link Assembly: Each Set Consist Of 58 Sub-Sets And Each Sub-Set Consists Of The Following: ( A ) Bucket, Matl.Is:226 -1No. ( B ) Tie Rod, En-8 - 2 Nos. ( C ) Link Riveted With Bucket , En-45, Forged And Heat Treated - 2 Nos. ( D ) Outer Links, En-45, Forged And Heat Treated - 6 Nos. ( E ) Bush, En-8 -4 Nos. ( F ) Split Pin - 4 Nos. The Holes Of The Link Should Be Core Hardened. 1 Set 6 Head Tumbler Assy. Complete Set Fitted With Bearing Block & Bearing No. 22228 For Bucket Elevator Unit No. 207, Size: 800Mm. 1 Set 7 Fine Coal Jig Bucket Elevator , Size:630Mm, Unit No. 222 & 223, Bucket & Chain Link Assembly :Each Set Consist Of 52 Sub-Sets And Each Sub-Set Consists Of The Following: ( A ) Bucket, Matl.Is:226 - 1 No. ( B ) Tie Rod, En-8 - 2 Nos. ( C ) Link Riveted With Bucket , En-45, Forged And Heat Treated - 2 Nos. ( D ) Outer Links, En-45, Forged And Heat Treated- 6Nos. ( E ) Bush, En- 8 -4Nos. ( F ) Split Pin - 4 Nos.The Holes Of The Link Should Be Core Hardened. 2 Set 8 Head Tumbler Assy. Complete Fitted With Bearing, Bearing Block & Duplex Sproket, Teeth – 36, Pitch - 2.5 / 63.5 Mm For Unit No. 223 ( 630 Mm Be ) 2 Set 9 Complete Liner Set ( Front & Back ) ( Angle + Liner ) For Bucket Elevator Unit No. 222 & 223, F / S Length= 40 Mtrs., W= 100 Mm X 16 Mm Thickness, B / S Length = 40 Mtrs., W = 60 Mm X 16 Mm Thickness, Base Angle F / S 125 Mm X 75 Mm X 8 Mm, B / S 90 Mm X 75 Mm X 8 Mm, Length Similar To Liner Length And Holes To Be Provided For Fastening In Set ( For 630Mm Be ) Material : Triscal / Sailma 2 Set 10 Complete Liner Set ( Front & Back ) ( Angle + Liner ) For Bucket Elevator Unit No. 207 Width 800 Mm, F / S Length= 45 Mtrs., W= 100 Mm X 16 Mm Thickness, B / S Length = 45 Mtrs., W = 60 Mm X 16 Mm Thickness, Base Angle F / S 125 Mm X 75 Mm X 8 Mm, B / S 90 Mm X 75 Mm X 8Mm, Length 1 Set Similar To Liner Length And Holes To Be Provided For Fastening In Set ( For 800Mm Be ) Material : Triscal / Sailma 11 Tail Tumbler Assy. Complete Set Fitted With Side Covers & Brass Bush For Bucket Elevator Unit No. 207 , Size: 800Mm. 1 Set B. Sawang Washery 12 Bucket& Chain Link Assy For Bucket Elevator ( 630X340 X435mm ) One Dewatering Bucket Elevator Capacity 70 Tph Inclination 69Deg, Length Of Elevator 1400 Mm Center To Center Bucket& Chain Link Assy. Complete. One Set Consisting Of 50 Subsets And Each Subset Consisting Of The Following. Bucket, Matl. Is:226 -1 No.; Inner Link, En-19- 2 Nos.; Outer Link, En-19 - 6 Nos.; Tie Rod, En-8 - 2 Nos;Bush, En 8, - 8Nos 1 Set 13 Lower Tumbler Bush 4 No. C. Kedla & Sawang Washery 14 Tail Tumbler With Shaft ( Tail Sproket Assy. ) For 630Mm Be Consisting Of I. Tumbler - 02 Nos. Ii. Shaft - 01 No. And Both Side Covers ( 2 Sets For Kedla Ws ) 2 Set 15 Tail Tumbler With Shaft ( Tail Sproket Assy. ) For 630Mm Be Consisting Of I. Tumbler - 02 Nos. Ii. Shaft - 01 No. And Both Side Covers ( 1 Set For Sawang Ws ) Total Quantity : 22
