Military Engineer Services-MES has published Tender For Provision Of Retaining Wall From Main Office To Main Gate At Postal Klp Occupied By Hq Mtn Div Pro Unit And Special Repair Of Bldg No T568 At Engr Regt Rear Location Tenga Of Age B/R Under Ge 859 Ews. Submission Date for this Tender is 18-05-2024. Building Work Tenders in Tenga Valley Arunachal Pradesh. Bidders can get complete Tender details and download the document.
| Sl. No. | Item Description |
| 1 | Rough excavation not exceeding 1.5 m deep and getting out in hard/dense soil with complete all as specified and directed by Engr-in-Charge. |
| 2 | Excavating over areas, n exc 1.5 m deep and getting out in hard/dense soil with complete all as specified and directed by Engr-in-Charge. |
| 3 | M&L for PCC type D-2, 1:4:8 (40mm graded aggregate) as in foundation filling and mass concrete with complete all as specified and directed by Engr-in-Charge. |
| 4 | M&L for walling of random rubble, uncoursed, well bonded, bedded and solidly hearted, built in retaining wall, abutments and similar work in CM 1:6 with complete all as specified and directed by Engr-in-Charge. |
| 5 | Extra over stone walling for hammer dressing to face stones and dressing with maximum depression from straight edge held against the dressed surface to face beds and joints, as specified, of random rubble walling, uncoursed or brought upto courses with complete all as specified and directed by Engr-in-Charge. |
| 6 | M&L for Raised pointing to random or polygonal rubble, uncoursed or brought upto courses in cement mortar 1:3 with complete all as specified and directed by Engr-in-Charge. |
| 7 | M&L for Precast PCC bonders (for stone walling) type B-1, 1:2:4 (20mm graded stone agg) in Cm 1:6 as in bond stone with complete all as specified and directed by Engr-in-Charge. |
| 8 | M&L for PCC type B-1, 1:2:4 (20mm graded stone agg) as in coping, roof kerbs or mud stops, rounded or chamfered on edgeswith complete all as specified and directed by Engr-in-Charge. |
| 9 | S&F 75mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls with complete all as specified and directed by Engr-in-Charge. |
| 10 | M&L for Hand packing (any thickness) at back of walls over arches etc. and raising (or lowering) to the required with broken stone or boulders with complete all as specified and directed by Engr-in-Charge. |
| 11 | Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm as in hard/dense soil. |
| 12 | Removing excavated material n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point with complete all as specified and directed by Engr-in-Charge. |
| 13 | Dismantling plain or corrugated steel sheeting of any thickness as in roof coverings with complete all as specified and directed by Engr-in-Charge. |
| 14 | Supply and Fix 0.80 mm thick plain, galvanised, mild steel sheeting, in ridges, hips, valley gutters, drip and straight flashings ( length and girth as fixed) with grade of zinc coating 120 gsm complete all as specified and as directed. |
| 15 | M & L for applying two coat of synthetic enamel paint over a coat of red oxide primer to steel and iron surfaces of any description over 10 cm in width or girth not otherwise described including preparation of new steel surfaces. |
| 16 | Material and labour for preparation of old painted steel surfaces of any description over 10 cm width or girth and applying one coat of synthetic enamel paint all as specified and directed. |
| 17 | Hacking out old broken glass (any thickness, size quality or description) from metal frame including punching or drilling out old glazing pins/spring clips and providing and fixing new ones. |
| 18 | S&F sheet glass 3mm thick ordinary quality and glazing with oil putty in squares n exc0.50 Sqm in each pane.(Make: Trivani/Modi Float/Gold Fish) |
| 19 | Demolition of cement concrete (unreinforced) in ground floors and paving’s not exc 15 cm thickness (below or above ground level) |
| 20 | M&L for 25 mm thick PCC 1:2:4 type B1 (using 20 mm graded stone aggregate) as in sub floor finishing cement concrete surface even and smooth using extra cement |
| 21 | M&L for 15 mm thick screed bed in CM 1:6 for laying floor tiles with complete all as specified and directed by Engr-in-Charge. |
| 22 | M&L for Non-skid ceramic coloured tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.18 sqm but not exceeding .38 sqm,etcin floors set and jointed in neat cement slurry and pointed in white/coloured cement to match the shade. (Make; Kajaria/ Johnson/ Somany). |
| 23 | Dismantling of wall and ceiling board or insulation boards/slabs/blanckets/any thickness including cover fillets |
| 24 | M & L for 50 mm thick II nd class Hard wood clean sawn boarding with butt joints fixed with nails in any situation with complete all as specified and directed by Engr-in-Charge. |
| 25 | S&F 6 mm thick ply wood, grade BWR, type BB, fixed with nails to timber frame work on wall surfaces with complete all as specified and directed by Engr-in-Charge. |
| 26 | S&F 4 mm thick ply wood, grade BWR, type BB, fixed with nails to timber frame work on ceiling surfaces with complete all as specified and directed by Engr-in-Charge. |
| 27 | M & L for 2 nd class Hard wood plain fillets, square, rectangularor triangular in section,wrought, secured with nails or brads, sectional area exc 3 but n.exc 6 sq.cm. |
| 28 | M&L for preparation of new wooden surfaces of any description, not other wise described, over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer. |
| 29 | Material and labour for preparation of old painted wooden surfaces of any description over 10 cm width or girth and applying one coat of synthetic enamel paint all as specified and directed. |
| 30 | Taking down chowkats or frames with shutters (without taking off shutters from the frames) area exceeding 1.50 Sqm but not exc 4 Sqm. |
| 31 | Taking down chowkats or frames with shutters (without taking off shutters from the frames) area not exceeding 1.50 Sqm |
| 32 | S & F 2nd class hard wood plain solid straight chowkats and frames, wrought, framed rebated on the solid rounded or chamfered, put together with glue pinned at joints complete |
| 33 | S & F 2nd class hard wood plain framed panelled shutter 35mm thick (any number of panels) with panels of timber flat on both sides, feather edged or of veneered particle board medium density, wood particle board with commercial face veneer 30mm thick with complete all as specified and directed by Engr-in-Charge. |
| 34 | S & F 30mm thick 2nd class hard wood glazed and skeleton shutters open rebated and prepared to receive glass, gauze etc but divided into squares, edges of framing plain, chamfered or rounded, fitted with cut and mitred beads etc with complete all as specified and directed by Engr-in-Charge. |
| 35 | S&F MS window guard bars, window frames etc articles confirming to Fe 410-0 or Fe 310-0 with complete all as specified and directed by Engr-in-Charge. |
| 36 | S & F 100mm size mild steel butt hinges medium weight cold rolled and fixed. |
| 37 | S & F 75mm size mild steel butt hinges medium weight cold rolled and fixed. |
| 38 | S& F Aluminium anodised barrel tower bolts150mm long of extruded section and fixed |
| 39 | S& F Aluminium anodised barrel tower bolts100mm long of extruded section and fixed |
| 40 | S & F 150mm size extruded aluminium alloy handles, fabricated type anodised |
| 41 | S & F 100mm size extruded aluminium alloy handles, fabricated type anodised |
| 42 | S & F aluminium alloy, anodised, sliding door bolts 300mm size with hasp, staple (bolt type) and fixing clips of sheets, cast or extruded sections and fixing bolts and sliding bolts of extruded section or cast aluminium alloy and fixed |
| 43 | S&F pre coated mild steel floor door stopper ,tongue anodized 140mm length includingvulcanised rubber piece |
| 44 | S & F GI steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm etc all as specified. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
