Military Engineer Services-MES has published Tender For Repair Maintenance Of Joinery, Flooring, Plastering And Misc Works In Offers Md Accommodation At Aor Of Ge Sgnr. Submission Date for this Tender is 24-05-2024. Building Work Tenders in ganganagar Rajasthan. Bidders can get complete Tender details and download the document.
| Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
| 1 | 17-May-2024 | Amd in BOQ | BOQ | 24-05-2024 |
| FileName | File Description | File Size |
| cfafdb67-5936-4140-aa45-51933ca7cf35.html | Tender Notice | 0 KB |
| BOQ_729893.xls | Tender Document | 0 KB |
| GenPage1.pdf | Tender Document | 0 KB |
| GenPage2.pdf | Tender Document | 0 KB |
| Tendernotice_1.pdf | Tender Document | 0 KB |
| Sl. No. | Item Description |
| 1 | Dismantling floor,hearth or wall tiling including cement mortar bedding (but not backing), terrazo dado/wall tiling and skirting. etc on brick or stone walls etc including racking out joints hacking for key and scrubbing and removing rubbish off the premisescomplete all as specified & directed by Engineer-in-Charge. |
| 2 | M&L forglazed ceramic coloured tiles, interior grade(600x300)x7mm thick as on vertical surfaces like dados or skirting laid over and including 10mm thick rendering in CM 1:4, set & jointed in neat cement slurry and pointed in white cement mixed with pigment to match the shade of tiles complete all as specified and directed by Engineer - in -Charge. |
| 3 | M&L for non-skid joint free coloured ceramic tile 7 to 8mm thick area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm, in floor etc. set & joined in cement slurry and pointed in coloured cement to match the shade of tile,laid over & including 15mm thick screed bed in cement mortar 1:4 complete all as specified and directed by Engineer-in-charge. |
| 4 | M&L forvitrified tiles 10 mm thick(square/rectangular), polished, coloured (light shade as approved), area of each tile not exceeding 0.36 sqm, in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles laid over & including 15mm thick screed bed in cement & sand mortar 1:4 complete all as specified & directed by Engineer-in-Charge. |
| 5 | M&L for vitrified ceramic tiles double charged10mm thick (square/rectangular), polished, coloured (light shade as approved), area of each tile not exceeding 0.36 sqm,as in as in vertical surface like dado/ skirting etc , set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles laid over & including 15mm thick screed bed in cement & sand mortar 1:4 complete all as specified & directed by Engineer-in-Charge. |
| 6 | M&L for 18 to 20 mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and including 10mm thick screed bed in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified & directed by Engineer-in-Charge. |
| 7 | Taking down and Refixing old 500 Ltrs capacity Rotational moulded polyethylen water storage tankafter cleaning and removing all scale and dirt etc from tanks and from mouths of cirulating pipes etc complete all as specified & directed by Engineer-in-Charge. |
| 8 | Dismantling PVC water tanks and removing for capacity exceedin 250 litres & not exceeding 500 litres etc., complete all as specified & directed by Engineer-in-Charge. |
| 9 | Dismantling of water tanks of capacity exc 500 Ltr & n.exc 1000 Ltr and complete all as specified & directed by Engineer-in-Charge. |
| 10 | S&F 1000 Litre capacity Rotational moulded polyethylene water storage tanks two layered(white coloured) (cylindrical, vertical with closed top) ISI marked, hoisted & fixed in position & making necessary arrangements for fixing inlet, outlet & over flow pipe & provision of wash out pipe etc. complete,complete all as specified & directed by Engineer-in-Charge. |
| 11 | S&F 500 Litre capacity Rotational moulded polyethylene water storage tanks two layered(white coloured)(cylindrical, vertical with closed top) ISI marked, hoisted & fixed in position & making necessary arrangements for fixing inlet, outlet & over flow pipe & provision of wash out pipe etc. complete all as specified & directed by Engineer-in-Charge. |
| 12 | S&F20 mm bore ball valve high pressure of PTMT with apoxy coated aluminium rod and high density plastic ball screwed for iron pipe,complete all as specified & directed by Engineer-in-Charge. |
| 13 | S&Fin repairs 20 mm bore ball valve high pressure of PTMT with apoxy coated aluminium rod and high density plastic ball screwed for iron pipe,complete all as specified & directed by Engineer-in-Charge. |
| 14 | S&F in repairs gun metal globe or gate valve with iron wheel head, screwed both ends for iron pipe and fixed of 20 mm bore,complete all as specified & directed by Engineer-in-Charge. |
| 15 | Taking up or down GI tubing 15 mm bore pipe and connections including cleaning for re-fixing complete all as specified & directed by Engineer-in-Charge. |
| 16 | Ditto- but refixing 15 mm dia ,old steel tubing and connections in new or old possition (wall,ceiling and floors etc) complete all as specified & directed by Engineer-in-Charge. |
| 17 | S&FGI tubing 15 mm bore medium grade galvanise with all fitting and fixed to walls & ceilings or laid in floors, bore of pipe complete all as specified & directed by Engineer-in-Charge. |
| 18 | Taking up or down GI tubing 20 mm bore pipe and connections including cleaning for re-fixing or removal to store complete all as specified & directed by Engineer-in-Charge. |
| 19 | Ditto- but refixing 20 mm dia ,old steel tubing and connections in new or old possition (wall,ceiling and floors etc) complete all as specified & directed by Engineer-in-Charge. |
| 20 | S&F GI tubing 20 mm bore medium grade galvanise with all fitting and fixed to walls & ceilings or laid in floors, bore of pipe complete all as specified & directed by Engineer-in-Charge. |
| 21 | M&L for Cutting chases, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth.In brick walls complete all as specified & directed by Engineer-in-Charge. |
| 22 | S & F in repairs stainless steel sink with drainage board made out of 1.00 mm thick sheet for kitchen with plug, washers, waste fitting, waste pipe, cast iron cantilever brackets, connecting unions over all size 915mmx 460mm with bowl size 410mmx 330mmx 160mm. complete all as specified & directed by Engineer-in-Charge. |
| 23 | S & F in repairs stainless steel Kitchen plate rack of overall minimum size 900mm x 750 mm x 250mm deep, with partitions for small/large plates etc made out of stainless steel 0.80 mm thick sheet fixed with rawl plug and CP steel screws complete all as specified & directed by Engineer-in-Charge. |
| 24 | S&F in repairs vitreous china wash down water closet pan (Pedestal pattern), white, including connection to drain (or outgoing pipe) and to flushing pipe, anti-sypohonage pipe etc., with plastic WC seat cover (white) closed pattern with flat bottom and cover and mild steel chromium plated or aluminized hinging device,complete all as specified & directed by Engineer-in-Charge. |
| 25 | S&F in repairs vitreous china squatting pan (Orissa pattern) water closet (white) of size 580x440mm with integral foot rests, CI 100mm bore "P" or "S" trap, including connection to trap and flushing pipe, antisyphonage pipe etcincluding provision of PCC (1:5:10) type E2 in filling, making good to floor, complete all as specified & directed by Engineer-in-Charge. |
| 26 | S & F in repairs plastic water closet seat cover black/white, closed pattern with flat bottom and cover and mild steel chromium plated or aluminium hinging device complete all as specified and directed by Engineer-in-charge. |
| 27 | S&F in repairs PVC valveless symphonic action type low level flushing cistern (ISI marked) of 10 litre capacity including32 mm dia PVC flush pipeconnected to water closet with inlet, ball valve, float and handle complete all as specified & directed by Engineer-in-Charge. |
| 28 | S&F in repairs vitreous china wash hand basin, white, flat back of size 550mm x 400mm with & including a pair of cast iron brackets embedded in PCC 1:3:6 type C1 blocks of size 10x7.5x15cm, 32 mm dia PVC waste pipe and 32mm bore chromium plated brass waste fitting with long screwed shanks and fly nuts, flange end bedded in red lead cement & other end fixed, (excluding tap, waste chain & plug), complete all as specified & directed by Engineer-in-Charge. |
| 29 | S&F in repairs PTMT grating 125mm dia with waste hole (Minimium weight 40 grams) complete all as specified & directed by Engineer-in-Charge. |
| 30 | S&F in repairs PTMT grating 100mm dia without hole (Minimium weight 25 grams) complete all as specified & directed by Engineer-in-Charge. |
| 31 | S&FPVC connection suitable for 15 mm bore 450mm long GI pipe including CP brass nuts on both sides, complete all as specified & directed by Engineer-in-Charge. |
| 32 | S&F in repairs 15mm bore bib tap(long body), cast copper alloy, chromium platedwith capstan head, screwed down, screwed for iron pipe or for brass ferrule,complete all as specified & directed by Engineer-in-Charge. |
| 33 | S&F in repair cast copper alloy CP angle valve for 15 mm bore pipe with capstan head long screwed shank including cp cover plate fancy type fixed as in repair complete all as specified & directed by Engineer-in-Charge. |
| 34 | S&F in repair 15mm bore concealed type, stop valve cast copper alloy screwed down high pressure with capstan head and cup, screwed both ends for iron pipe or for union complete all as specified & directed by Engineer-in-Charge. |
| 35 | S&F in repairs 15mm bore cast copper alloy spindel for bib tap,stop valve,concealed valve with capstan head and cup, screwed both ends for iron pipe or for union complete all as specified & directed by Engineer-in-Charge. |
| 36 | S & F in repairs swan neck pillar cock 15mm bore cast copper alloy with capston heads, chromium plated, fancy type with long screwed shanks and fly nuts, screwed down high pressure with or without lettered "Hot" or "Cold" screwed for iron pipe complete all as specified and directed by Engineer-in-charge. |
| 37 | S&F in repair central hole wash basin mixer 15mm bore brass waste with 10mm dia 450mm long copper pipes complete all as specified and directed by Engineer-in-charge. |
| 38 | S&F in repairs chromium plated brass L-Bend mixture non telephonic with fancy knob with hot and cold arrangements with long shank and cup complete all as specified & directed by Engineer-in-Charge. |
| 39 | S&F in repairs sink mixer 15mm bore brass waste with 10mm dia 450mm long copper pipes complete all as specified and directed by Engineer-in-charge. |
| 40 | S&F in repairs shower health faucet to EWC ,CP brass with minimum 1000 mm long CP flexible pipe, connection etc., complete all as specified & directed by Engineer-in-Charge. |
| 41 | S&F in repairs PTMT any colour (15mm bore) Jet spray for EWC with all fixing arrangements complete all as specified and directed by Engineer in charge. |
| 42 | S&F in repairs toilet paper holder, brass chromium plated fixed to walls with chromium plated (CP) brass screws complete all as specified and directed by Engineer-in-charge. |
| 43 | S&F in repairs CP brass soap dish of fancy type, complete all as specified and directed by Engineer-in-charge |
| 44 | S&F in repairs glass corner self assembly, fancy type,made of 5 mm thick sheet toughened glass of size 250x250mm,fixed with CP brackets,complete all as specified & directed by Engineer-in-Charge. |
| 45 | S&F in repair5 mm thick and 450 mm long glass shelves fancy typeand fixed over CP brass brackets all as specified and directed by Engineer-in-charge. |
| 46 | S&F in repairs CP brass tubular towel rail,20mm dia, ‘D’ type, 60cm long between flanges, fixed to PVC rawl plugs with chromium plated brass screws, complete all as specified & directed by Engineer-in-Charge. |
| 47 | S&F in repairs brass chromium plated shower rose 125 mm size without swivel joint including fixing to steel pipe of 15mm bore with 45cm length or union complete all as specified & directed by Engineer-in-Charge. |
| 48 | S&Fin repair 600mmx450mm bevelled edge mirror of selected quality glass mounted on 6mm thick AC building board or commercial Ply wood backing and teakwood polished beading of 50x20mm size and fixed to wooden plugs with chromium plated brass screws and cup washer, complete, all as specified. |
| 49 | S&F in repairs cabinet of PTMT with looking mirrorof size 450x600mm complete all as specified and directed by Engineer-in-charge. |
| 50 | S & Fwaste couplings of stainless (half or full threaded) of40 mm complete all as specified and directed by Engineer in charge. |
| 51 | S & F in repairs32mm bore waste fittings brass chromium plated for glazed ware sink,basins etc with long screwed shanks and fly nuts flange and bedded in red lead cement and other end fixed complete all as specified and directed by Engineer - in -Charge. |
| 52 | Dismentling of boarding any description fixed in any position with nails/ screws complete all as specified & directed by Engineer-in-Charge. |
| 53 | S& F 18 mm thick Block boards, grade 2 quality, interior grade,commercial type, fixed with screws to timber frame work as in Kitchen cabinet, cupboard shelfcomplete all as specified & directed by Engineer-in-Charge. |
| 54 | M&L for 0.9mm thick Decorative laminate type 1 of surface finish, colour and pattern as approved, fixed with approved adhesive as per manufacturer"s instructions complete all as specified & directed by Engineer-in-Charge. |
| 55 | S&F 25 mm size magnetic catches with Plastic body and striking plate including letting in and fixed complete |
| 56 | S&F continuous (piano) hinges 20mm & 12 MM width of flap, mild steel bright finish or electrogalvanised of complete all as specified fixed with CP steel screws |
| 57 | S&F butt hinges of size 100 mm medium weight, stainless steel ISI marked complete all as specified & directed by Engineer-in-Charge. |
| 58 | S&F in repair butt hinges of size 100 mm medium weight, stainless steel ISI marked complete all as specified & directed by Engineer-in-Charge. |
| 59 | S & F Stainless steel fancy type 150 mm handle complete all as specified & directed by Engineer-in-Charge. |
| 60 | S & F in repair Stainless steel fancy type 150 mm handle complete all as specified & directed by Engineer-in-Charge. |
| 61 | S&F 40 mm dia brass polishedcupboards knobs fixed with nut screw and washer of mild steel bright finished complete all as specified & directed by Engineer-in-Charge. |
| 62 | Repairing/ Easing door / window shutters of any size including taking down ,repairs,refixing in same and other opening type complete all as specified and directed by Engineer - in -Charge. |
| 63 | S&F in repair 3mm thick sheet glass ordinary quality and glazing with oil putty in square not exc 0.5 sqm in each pane including painting / oiling to new putty to match with the existing/new surfaces, complete all as specified & directed by Engineer-in-Charge. |
| 64 | S&F in repair stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples all complete all as specified & directed by Engineer-in-Charge. |
| 65 | Taking down chowkats or frame with shutter (without taking out shutter from the frame) not exceeding 1.50 sqm each as doors, windows & ventilators etc. and removal from site complete all as specified & directed by Engineer-in-Charge. |
| 66 | Taking down chowkhats or frame exc 1.5 Sqm but n.exc 4 Sqm each with shutters(W/out taking off shutters from the frames) complete all as specified & directed by Engineer-in-Charge. |
| 67 | Taking down shutters of any description exc 1 Sqm but not exc 2 Sqm each and removal complete all as specified & directed by Engineer-in-Charge. |
| 68 | Taking down shutters any description exc 1 Sqm but n.exc 2 sqm each, and refixing in the same openingincluding easing and adjusting complete all as specified & directed by Engineer-in-Charge. |
| 69 | S&F second class hardwood Plain, solid, straightchowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinnedat joints,suppliedandfixed complete all as specified & directed by Engineer-in-Charge. |
| 70 | S&F factory made Pressed steel frames of size 125 X 60 mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc, (thickness ofsheet shall be 1.25mm) and making good the wall with plaster in CM 1:6 complete all as specified & directed by Engineer-in-Charge. |
| 71 | S&F factory made pressed steel frames of size 105 X 60 mm for doors with one or more rebates including necessary fixing lugs hinges, locks strike plate etc, (thickness ofsheet shall be 1.25mm) and making good the wall with plaster in CM 1:6 complete all as specified & directed by Engineer-in-Charge. |
| 72 | M&L PCC 1:3:6 type C-1 using 20 mm graded stone aggregate for filling in back of pressed steel door frame/chowkhat and fixing of bed block of hold fast etc complete all as specified & directed by Engineer-in-Charge. |
| 73 | S&F factory made 2nd class HW factory made Plain, framed, pannelled shutters 35 mm thick (two panels), with lock rail and panel of 9mm BWP commercial ply or 12mm veneered particle board with commercial veneering on both faces.The size of rail and stile as per IS:1003 (Part I) Kiln seasoned and chemically pressure treated complete all as specified & directed by Engineer-in-Charge. |
| 74 | S&F factory made 2nd class hardwoodglazed skeleton shutters 35 mm thick open rebated and prepared to receive guage etc but divided into squares, with plain chamfered or rounded, metered and riveted sash bars any numbers including necessary beading used for protect the wire mesh also complete all as specified & directed by Engineer-in-Charge. |
| 75 | M&L for Rubber sheet 50mm wide and of thickeness not less than 3mm fixed with stainless steel screws at the bottom of the door shutters complete all as specified & directed by Engineer-in-Charge. |
| 76 | S&F in repairsPlain fillets or beading of sectional area Exc3 & n. exc 6sq.cm of 2nd class hard wood square, rectangular or triangular in section , clean sawn, se-cured with nails or brads for securing wiremesh or similar worksput together with glue pinned at joints incomplete all as specified & directed by Engineer-in-Charge. |
| 77 | S&F factory madefiber glass reinforced plastic (FRP) door frame (ISI marked) of cross-section 90mm x 45mm (minimum) having single rebate to receive shutter of 30mm thickness. The laminate door frame moulded with fire retardant grade unsaturate polyster resin and chopped mat, door frame laminate shall be 2mm thick, filled with core material and shall be filled with suitable wooden block for fixing hinges and other Hardware accessories, the frame shall be covered with fiber glass from all sides. MS stay shall be provided at the bottom to stand by the frame complete all as specified and directed by Engineer-in-Charge. |
| 78 | S & F factory made 30mm thick glass fiber reinforced plastic (FRP) panelled door shutter (ISI marked) of requiredcolour made with fire retardant grade unsaturated polyester resin moulded to 3mm thick FRP laminate for forming hollow rails and styles, filled with core material, wooden frame alround and suitable wooden block for fixing of hard ware accessories made out of seasoned wood inside as required, cast monolithically complete all as specified & directed by Engineer-in-Charge. |
| 79 | S&F aluminium handle, 150mm size, cast type, anodized (ISI marked) .(D type Handle and back side staple) complete all as specified & directed by Engineer-in-Charge. |
| 80 | S&F 200 mm long aluminium anodized barrel tower bolts of extruded section (ISI marked) complete all as specified & directed by Engineer-in-Charge. |
| 81 | S&Fin repairs 300 mm long mild steel sliding door bolts, plate type, stove enameled black, with bright bolt not less than 12mm dia and including a minimum of 06 bolts and nuts, four on bolt plate and two on staple plate and fixed, complete all as specified & directed by Engineer-in-Charge. |
| 82 | S&F in repair mild steel helical door spring 300mm ordinary rat tail rod pattern spring including roller and roller plate complete all as specified & directed by Engineer-in-Charge. |
| 83 | S&F in repair 150mm length floor door stopper of aluminium alloy body and tongue,anodised with hard drawan steel spring fixed in floor complete all as specified & directed by Engineer-in-Charge. |
| 84 | S&FAluminium frame for doors, window, ventilatorswith one or more rebates including joining cleat for fixing etc complete with powder coating on Aluminium minium thickness of powder coating 50 micron as per the specification the top and bottom horizontal members and vertical members adjacent walls shall be fixed with floor, ceiling walls and cills where required and fixing with the help of rawal plug and screw or with fixing clip or with expansion hold plate fasteners . Aluminium section shall be smooth, rust free, straight mitred and jointed mechanically where ever required all complete all as specified & directed by Engineer-in-Charge. |
| 85 | S&F Aluminium window(glazed and gauzed both),side hung type without sash bars, aluminum section weighing not less than 0.55 Kg/m including necessary joining cleats, glazing, clips, rubber packing, anodised aluminium snap beading screws,aluminium fitting such as peg stays 150mm long (01 nos), hinges type B-21 100mm long (02 Nos) suitable handle (01 No)with powder coating of any colour (thickness of powder coating not less than 50micron) etc complete all as specified & directed by Engineer-in-Charge. Note: Only Glass and wiremesh will be measured and paid seperately. |
| 86 | S&F) Alumunium powder coated50micron ventilator including frame and shutter and provision of neccessary rubber gasket for fixing glass panes etc complete all as shown in drawing No CEBT/SK-936 sheet 1/1. Note : Glass panes and wiremesh shall be measured and paid seperately under respectively Items . |
| 87 | S&F anodized aluminium grill powder coatedof approved pattern of mesh 80x80mm, 6mm dia bars using U channel 25x12mmfor windows / ventilators / doors complete, complete all as specified & directed by Engineer-in-Charge. |
| 88 | S&F 5.0 mm thick sheet glass ordinary quality in squarenot exceeding 0.5 sqm in each pane complete all as specified & directed by Engineer-in-Charge. |
| 89 | S&F in repair 5.0 mm thick sheet glass ordinary quality in squareexceeding 0.5 sqm in each pane complete all as specified & directed by Engineer-in-Charge. |
| 90 | Taking down cement plaster on brick wall including racking out joints, hacking for keys scrubbing down with water complete all as specified & directed by Engineer-in-Charge. |
| 91 | M&L 15mm thick, rendering in cement mortar 1:6 to brick/concrete wall surfaces finished even and smooth without using extra cement complete all as specified and directed by Engr-in-Charge. |
| 92 | M&L 15mm thick, rendering in cement mortar CM 1:4 to brick/concrete wall surfaces finished even & smooth without using extra cement complete all as specifiedand directed by Engr-in-Charge. |
| 93 | M&L 5mm thick, rendering in cement mortar1:3 to ceiling surfaces finished even and smooth without using extra cement complete all as specified and directed by Engr-in-Charge. |
| 94 | M&L two coats of white wash on new plastered surfaces of ceiling including preparation of surfaces complete all as specified anddirected by Engr-in-Charge. |
| 95 | M&L for prepration of New plastered Internalwall surface completeapplying the following :- (a) Applying 3mm thick wall care puttyon wall surface and smoothening the surfcae with sand papers / Mechanised sanding etc prepatory to paint as directedcoomplete all as specified (b)Applying a coat of primer by usingRoller over putty (c)Applying two coats of oil bound distemper by usingRoller over complete all as specified Note : Contractor may use manual scraping tools for complete removal and surface prepration with prior approval of Engr-in-chrge |
| 96 | M&L for prepration of New plastered external wall surface completeapplying the following :- (a) Applying 3mm thick wall care puttyon wall surface and smoothening the surfcae with sand papers / Mechanised sanding etc prepatory to paint as directedcoomplete all as specified (b)Applying a coat of primer by using Brush / Roller over putty (c)Applying two coat ofPremium exterior acrylic emulsion Apex paint by using Roller over complete all as specified Note : Contractor may use manual scraping tools for complete removal and surface prepration with prior approval of Engr-in-chrge |
| 97 | M&L complete removal of existing treatment on oldwall surface smoothening the surface with sand papers / Mechanized sanding completeapplying the following :- (a) Applying 3mm thick wall care puttyon wall surface and smoothening the surfcae with sand papers / Mechanised sanding etc prepatory to paint as directedcoomplete all as specified (b)Applying a coat of primer by usingRoller over putty (c)Applying two coats of acrylic Emulsion by usingRoller over complete all as specified Note : Contractor may use manual scraping tools for complete removal and surface prepration with prior approval of Engr-in-chrge |
| 98 | M&Lapplying two coats of premium acrylic smooth exterior weatherproof paint on external surfaces of wallon oldplastered surface of wall complete all as specified and directed by Engineer-in-charge |
| 99 | M&Lfor Preparation of old internal wall surface and applying one coat of interior acrylic Emulsionr of approved tint using Brush / Roller over complete all as specified & directed by Engineer-in-Charge. |
| 100 | M&L for preparation of old painted wooden surfaces of any description over 10cm width or girth not otherwise described and applying one coat of synthetic enamel paint complete all as specified & directed by Engineer-in-Charge. |
| 101 | M&L for preparation Newly wooden surfaces of any description over 10cm width or girth not otherwise described and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed by Engineer-in-Charge. |
| 102 | M&L for preparation of old painted steel surfaces of any description over 10cm width or girth not otherwise described and applying one coat of synthetic enamel paint complete all as specified and directed by Engr-in-Charge. |
| 103 | M&L for preparation of Newly steel surfaces of any description over 10cm width or girth not otherwise described and applying two coat of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed by Engr-in-Charge. |
| 104 | S&F factory made 40 mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides as in c fixed to steel/wooden frame complete all as specified and directed by E-in-Charge. |
| 105 | S&F in repairs mortice brass lock vertical type 4 levers size 100 mm complete all as specified and directed by Engineer in charge. |
| 106 | S&F in repairs Aluminium extruded body door closure hydraulically regulated, designation No 3 universal type suitable for door shutters of any size complete all as specified and directed by Engineer in charge. |
| 107 | Hacking out old broken glass (any thickness, size, quality or description) from metal frames, including punching or drilling out old glazing pins / spring clips and glazed with oil putty complete all as specified and directed by Engineer - in -Charge. |
| 108 | M&L for weldingof steel work & repairs to steel windows, handles, butt hinges, tower bolt and other steel work of any type & size complete all as specified and directed by Engineer in charge. |
| 109 | S & F hasp and staple, safety type stove enameled black,of mild steel 100mm size complete all as specified and directed by Engineer - in -Charge. |
| 110 | Taking down rain water pipe and eaves gutters(any size and pattern) including all fittings heads shoes bends swan necks etc including cleaning or refixing or removal to store(measured overall as fixed along the centre line over fittings and accessories) complete all as specified & directed by Engineer-in-Charge. |
| 111 | S & F 110 mm bore of pipe PVC (SWR) pipes single socket in any length with rubber ring joint fixed to walls with MS clamps complete all as specified & directed by Engineer-in-Charge. |
| 112 | S & F 110 mm bore of pipe PVC (SWR) bends of any radius / shoefixed to PVC pipes complete all as specified & directed by Engineer-in-Charge. |
| 113 | S & F in repair Stack clamps out of 50mm by 5 mm flat iron and 16mm dia round iron stays for 100mm bore of pipe, including bolts and nuts and securing ends of stays to wall or roof etccomplete all as specified and directed by Engineer - in -Charge. |
| 114 | S&F in repairs 100mm bore (sand cast) Cast Iron soil waste & vent pipes in any length with or without ears, with cement joints but fixed to walls & fixing with clamps complete all as specified & directed by Engineer-in-Charge. |
| 115 | S&F in repairs 75mm bore (sand cast) Cast Iron soil waste & vent pipes in any length with or without ears, with cement joints but laid in trenches / floors complete all as specified & directed by Engineer-in-Charge. |
| 116 | S&F in repairs stainless steel curtain rod 25 mm dia (minimum weight 0.36 Kg per RM) with brackets, fancy knobs and rings (20 cm c/c) etc complete all as specified & directed by Engineer-in-Charge. |
| 117 | S&Fin repairs 100 bore,CI bends (any radius), diminishing pieces or tapers (large bore measured) with oval access door as in repairs complete all as specified & directed by Engineer-in-Charge. |
| 118 | S&Fin repairs 75 bore, CI bends (any radius), diminishing pieces or tapers (large bore measured) with oval access door as in repairs complete all as specified & directed by Engineer-in-Charge. |
| 119 | M&L forin repairs 100mm dia of long neck CI floor trap with grating incluing jointing to waste pipe fixed in cement concrete 1:2:4 type B1 in repair complete all as specified & directed by Engineer-in-Charge. |
| 120 | M&L forin repair 75mm dia of long neck CI floor trap with grating incluing jointing to waste pipe fixed in cement concrete 1:2:4 type B1 in repair complete all as specified & directed by Engineer-in-Charge. |
| 121 | Demolition of Cement concrete (unreinforced) of any description and in any position not otherwise specifically provided complete all as specified & directed by Engineer-in-Charge. |
| 122 | Water proofing treatment to sunken slab and adjjoining vertical surfaces as specified under :- (a) M&L rendering 10 mm thick in cement plaster (1:3) using coarse sand mixed with integral water proofing compound trowel even and smooth with steel trowel on sunken surfaces (Note : WPC shall be measured and paid separately) (b) Applying first coat of chemical pidifin 2K(Dr Fixit) on cleared RCC surfaces @ 0.86 Kg/Sqm (Minimum) as recommended by manufacturer. (c) Provide a layer glass fibre mesh of size 2.25mm x2.25mm (45 GSM) over first coat of chemical Pidifin 2K as per manufacturers recommendation. (d) Applying second coat of chemical Pidifin 2K (Dr Fixit) @ 0.86 Kg/Sqm (minimum) layer glass fibre mesh of size 2.25mm x 2.25mm (45 GSM) as recommended by manufacturers. |
| 123 | Supply only Integral water proofing compound ISI marked confirming to IS 2645 - 2003 complete all as specified & directed by Engineer-in-Charge. |
| 124 | M&L for PCC 1:5:10, type E-2 (40mm graded stone aggregate) as in filling of sunken floors etc complete all as specified & directed by Engineer-in-Charge. |
| 125 | S&F in repairs 40 mm GI pipe medium grade, made to shape as in spout pipe in sunken/ verandah/ Balcony complete all as specified & directed by Engineer-in-Charge. |
| 126 | Demolition of cement concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level)complete all as specified & directed by Engineer-in-Charge. |
| 127 | M&L for 75mm thick Cement concrete type C-2 , 1:3:6 (40 mm graded stone aggregate) as in plinth protection finished even & smooth laid in alternate bay n.exc 2.5m length including necessary formwork all as specified and directed by engr-in-charge. |
| 128 | M&L for 75mm thick Cement concrete type C-2 , 1:3:6 (40 mm graded aggregate) as in sub base of floor complete all as specified & directed by Engineer-in-Charge. |
| 129 | M&L for PCC (1:2:4) type B-0, 25mm thick as in floors,pavings e.t.c finished even and fair complete all as specified & directed by Engineer-in-Charge. |
| 130 | S & F in repairs 18/19mm thick Particle Board, medium density, flat pressed single layer type or three layer type with BWR type adhesive, fixed with screws to timber framwork complete all as specified and directed by Engr-in-charge. |
| 131 | S&F forRolled mild steel in roof trusses, (framed), trussed purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee,angle,channel or flat sections) including distance pieces , cleats etc. conforming toFe-290 grade E-165 complete all as specified & directed by Engineer-in-Charge. |
| 132 | Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified & directed by Engineer-in-Charge. |
| 133 | Dismantling Asbestos cement ( corrugated, semicorrugated ,etc.) sheets in roof coverings complete all as specified & directed by Engineer-in-Charge. |
| 134 | S&FPPGL/PPGI based corrugated steel sheet 0.50mm thick of red colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws complete all as specified & directed by Engineer-in-Charge. |
| 135 | Demolition of RCC of any descrition such as Kitchen chimney, chajja, shelves, OHT Tanks. etc and in any position not other wise specially provided for complete all as specified and directed by Engineer in Charge (reinforcement cut as required to facilitate demolition) |
| 136 | M&L for reinforced cement concrete type B1 1:2:4 (20 mm graged aggregate) as in Slab supported on walls, beams and column in floors, roofs, landings, balconies, deck slabs and in shelves and etc. and setting in mortar complete with joints to match complete all as specified & directed by Engineer-in-Charge. |
| 137 | M&L for TMT bars 8mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with the including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified & directed by Engineer-in-Charge. |
| 138 | Use and waste of form work torough finished surfaces of soffits of suspended slab such as roof slabs, floor slabs, landings and similar work not exceeding 200mm thickcomplete all as specified & directed by Engineer-in-Charge. |
| 139 | Note :(i) Amount ofcredit for retrieved materials is mentionedin Sch "A" Section-II of tender documents in pdf form which will be deducted while acceptance of tender offline. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
