Military Engineer Services-MES has published Tender For Certain Repairs To Bldg (Otm Accn) Of Asc Bn, Armd Regt And Tk Tp Pi Asc Under Age B/R-Ii Of Ge (East) Ferozepur Cantt. Submission Date for this Tender is 29-05-2024. Building Work Tenders in ferozepur Punjab. Bidders can get complete Tender details and download the document.
| Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
| 1 | 14-May-2024 | Corrigendum | Other | 22-05-2024 |
| 2 | 22-May-2024 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 29-05-2024 |
| FileName | File Description | File Size |
| 6660b73b-61c9-4003-b565-c5ed9ed9c502.html | Tender Notice | 0 KB |
| BOQ_729948.xls | Tender Document | 0 KB |
| CA8014.pdf | Tender Document | 0 KB |
| Tendernotice_1.pdf | Tender Document | 0 KB |
| Sl. No. | Item Description |
| 1 | M&L flush pointing to brick laid flat or brick tiles in roofs and pavingin cement mortar (1:3)including racking out joints/ pointing to brick work or brick tilesin roofs etc. work built in cement mortar complete all as specified and directed. |
| 2 | M&L Glazed ceramic coloured tiles in vertical surfaces 300x450x7mmthickset and jointed in neat cement slurry and pointed in white or coloured cement to match over including 10 mm thick rendering in cement mortar (1:4)on fair faces of brick work or concrete surfaces including dismentling of wall tiling with cement mortar bedding (but not backing) removing seviceable tiles to store and rubbish off the premises ccomplete all as specified and directed. |
| 3 | M&L Non skid ceramic coloured tiles7 to 8 mm thick (square)area of each tiles exceeding 0.06 Sqm but nexc 0.11 sqm,in floor etc set and jointed in neet cement slurryand pointed in white or coloured cement to match overincluding 15 mm thickscreed bed in cement mortar (1:6)including dismentling of floor tiling with cement mortar bedding (but not backing) removing seviceable tiles to store and rubbish off the premises complete all as specified and directed. |
| 4 | M&L Non skid ceramic coloured tiles7 to 8 mm thick (square)area of each tiles exceeding 0.11 Sqm but nexc 0.18 sqm,in floor etc set and jointed in neet cement slurryand pointed in white or coloured cement to match overincluding 15 mm thickscreed bed in cement mortar (1:6) including dismentling of floor tiling withcement mortar bedding (but not backing) removing seviceable tiles to store and rubbish off the premises complete all as specified and directed. |
| 5 | M&L for Glazed ceramic tiles, coloured (light colour as approved),7 to 8 mm thick (square)area of each tiles exceeding0.11 Sqm but nexc 0.18 sqm, on vertical surfaces such as in skirting/dado etc set and jointed in cement slurry over 10mm thick rendering in cement mortar (1:4) and pointed in white cement with pigment to match the colour of tilesincluding dismentling of floor tiling incl cement mortar bedding (but not backing) removing seviceable tiles to store and rubbish off the premises complete all as specified and directed. |
| 6 | M&L for Vitrified Ceramic tiles 10 mm thick (square/ rectangular)polished, area of each tiles not exceeding 0.36 sqm, infloors etc set and jointed in cement slurry over 10mm thick rendering in cement mortar (1:4) and pointed in white cement with pigment to match the colour of tiles including 15 mm thickscreed bed in cement mortar (1:6)including dismantling of floor tiling with cement mortar bedding (but not backing) removing seviceable tiles to store and rubbish off the premises complete all as specified and directed. |
| 7 | Demolition of un-reinforced cement concrete in any position complete all as specified and directed. |
| 8 | M&L for 40 mm thickPCC (1:2:4) type B-1 using 20 mm gradedcrushed stone agg.as in floor finished complete all as specified and directed. |
| 9 | Taking down cement plaster & rendering 15 mm thickin cement mortar (1:4) on any face of brick walls or concrete surfaces, finished fair & even and applying two coats of cement based paint on walls incl preparation of new surfaces complete all as specified and directed. |
| 10 | Taking down cement plaster & rendering 15 mm thickin cement mortar (1:6) on any face of brick walls or concrete surfaces, finishedeven and smooth without using extra cement and applying two coats of white lime wash (white washing) incl preparation of new surfaces on walls complete all as specified and directed. |
| 11 | Taking down cement plaster on ceiling surfaces &rendering 5 mm thickin cement mortar (1:3) finished even &smooth without using extra cement and applying two coats of white wash incl preparation of surfaces complete all as specified and directed. |
| 12 | Demolition of brick work built in cement mortar of any specification and in any position complete all as specified and as directed. |
| 13 | M&L brick work with sub class "B" bricks, straight or curved on plan exceeding 6m mean radius built in CM (1:6) complete all as specified and directed. |
| 14 | All as per item 13here-in-before but using old bricks retrieved from demolitionincluding cleaning and removal of mortar from old bricks etc complete all as specified and directed. |
| 15 | M&Lrendering 15 mm thickin cement mortar (1:4) on any face of brick walls or concrete surfaces, finished fair & even and applying two coats of cement based paint on walls incl preparation of new surfaces complete all as specified and directed. |
| 16 | Taking downchowkhats or frames exc 1.50 Sqmbut n .exc 4 Sqm each, removing to or from store, including cutting holes in brick walls of appropriate size for insertion of cement concrete blocks for hold fasts,or otherwise as directed complete all as specified and directed. |
| 17 | Refixing wooden shutters of any description in same openingexc 1.00 Sqmbut n.exc 2.00 Sqm each, complete all as specified and directed. |
| 18 | Taking down chowkats or frames with shutters (without taking off shutters from the frames) of sizeexceeding 1.5 Sqm but n.exc 4 sqmeach including cutting holes in brick walls of appropriate size for insertion of cement concrete blocks for hold fasts or otherwise as directed complete all as specified. |
| 19 | S&F for Pressed Steel Frames for doors1.25 mm thick MS sheet of profile (105X60)mm for doors and windows frames with one or more rebates including necessary fixing lugs, hinges, lock, strike plates, shockabsorber 20mm dia,60mm MS conduit for housing of a drop bolt etc. treating of internal surfaces of chowkhats with coal tar or black paintccomplete all as specified and directed. |
| 20 | S&F for Pressed Steel Frames for doors1.25 mm thick MS sheet of profile (125X60)mm for doors and windows frames with one or more rebates including necessary fixing lugs, hinges, lock, strike plates, shockabsorber 20mm dia,60mm MS conduit for housing of a drop bolt etc. treating of internal surfaces of chowkhats with coal tar or black paintcomplete all as specified and directed. |
| 21 | M&L for PCC (1:3:6) type C-1 using 20 mm gradedstone agg .as in filling steel frames etc including necessary form work complete all as specified and directed. |
| 22 | Material and labour forPCC (1:2:4) type B1 with using 20 mm graded stone agg as inbed blockhold fast block complete all as specified and directed. |
| 23 | Taking down shuttersof any description exc 1 sqm and not exc 2 sqm each or otherwise complete all as specified and directed. |
| 24 | S&F 35 mm thick, 2nd class hard wood, plain framed, panelled shutters (any number of panels) with panels of timber flat on both sides (feather edged) or of veneered particles board medium density wood particle board with comercial face veneers, size of members as specified in clause 8.24 (a) of MES Schedule Part-I section-II complete all as specified and directed. |
| 25 | S&F 35 mm thick,2nd class hard wood, glazed and skeleton shutters open rebated and prepared to receive glass,gauge etc (without sash bars), edges of framing plain chamfered or rounded, fitted with cut and mitered beads for securing glass etc, size of members of shutters as specified in SSR part-I section 8, clause 8.24 (a) of MES Schedule Part-I Section-8, complete all as specified and directed. |
| 26 | S&F 200 mm Aluminium anodised, barrel tower bolts of extruded section and fixed complete all as specified and directed. |
| 27 | S&F 150 mm Aluminium handles, cast type, anodised complete all as specified and directed. |
| 28 | S&F for250 mm Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed. |
| 29 | S&F300mm, Mild steel ordinary rat tail rod patttern springs includding roller and roller plate complete all as specified and directed. |
| 30 | M&L for Preparation of new wooden surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed. |
| 31 | Taking down chowkats or frames with shutters (without taking off shutters from the frame) of size not exceeding 1.5 Sqm each including cutting holes in brick walls of appropriate size for insertion of cement concrete blocks for hold fasts or otherwise complete all as specified and directed. |
| 32 | S&F Solid PVC door frame of size 50mmx47mm made out of 5mm plain colour PVC sheetrainforced with MS square tube complete all as specified and directed. |
| 33 | S&F Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top and bottom rail MS frame shall be covered with heat moulded plain / coloured PVC "C"channel having a PVC sheet strip of20mm width stuck inside with solvent cement for styles and plain colour PVC sheets for top rail, lock rail & bottom rail;on either side & as gap insert for top rail;panelling of plain colour PVC sheet to be fitted in the MS frame welded/ sealed to the stiles & rails with suitable PVC sheet beading, and jointed together with solvent cement complete all as specified and directed. |
| 34 | S&F PTMT butt hinges, 100 mm long and fixed with steel screws complete all as specified and directed. |
| 35 | S&F PTMT tower bolts, 150 mm long and fixed with steel screws complete all as specified and directed. |
| 36 | S&FPTMT door handle, 150 mm long and fixed with steel screws complete all as specified and directed. Make Prayag/Polytuf or equivalent make as approved by GE. |
| 37 | S&F factory made box type steel window with glazed and mesh shutters with pintal hinges & 2 Nos 150 mm mild steel tower bolts to each shutter, steel handle two shutters withoutglazing bars and two shutters with glazing bars dovetailed or welded and with framed guard bars with one shop coat of zinc chromate primer complete all as specified and directed. |
| 38 | S&F factory made box type steel ventilator with with glazing bars dovetailed or welded and with one shop coat of zinc chromate primer complete all as specified and directed. |
| 39 | S&F 3 mm thick, plainsheet glass ordinary quality and glazing,with oil putty or with wooden beads, in squares n.exc 0.50 Sqm in each complete all as specified and directed. |
| 40 | S&F 3 mm thick, plainsheet glass ordinary quality and glazing,with oil putty or with wooden beads, in squares n.exc 0.50 Sqm in each including hacking out old broken glass (any thickness, size, quality or description) from wooden/ steel frames, complete all as specified and directed. |
| 41 | S&Fstainless steel wire cloth0.56 mm nominal dia of wire and average width of aperture not more than 1.18 mm and fixed with stainless steel wire staples complete all as specified and directed. |
| 42 | S&F in repairs stainless steel wire cloth0.56mm nominal dia of wire and average width of aperture not more than 1.18 mm and fixed with stainless steel wire staples complete all as specified and directed. |
| 43 | M&L for preparation ofnew steel surfaces of any description, over 10 cm width or girthand applyingtwo coats of synthetic enamel paint including one coat of red oxide primer complete all as specified and directed. |
| 44 | M&L for preparation ofnew steel surfaces of any description, over 10 cm width or girthand applyingtwo coats of synthetic enamel paint complete all as specified and directed. |
| 45 | S&F in repairs decorative mild steel coloured curtainrod of 20 mm dia PVC coated approved pattern & design including side cups, powder coated mild steel flat iron brackets fixed with steel screws & PVC rawl plugs, complete all as specified and as directed. |
| 46 | Dismantling wrought iron work or mild steel work of any description and S&F Framed mild steel work of grade E-165 (Fe-290) as in framed work such as doors, gates or frame for cooler stand with gusset plates, rails, braces etc, drilled for fixing of sheeting or other covering of door etc, to be prepared for hanging or sliding etc including either hooks and hinges or steel hanging door fittings and hanging and fixing complete all as specified and directed. |
| 47 | S&F 20 mm thick 2nd class hardwood boarding planed one side with butt joints fixed in shelves; Partitions and shelves of built-in cupboards, almirahs, book cases, toilet boxes, racks, pelmets and similar work, including dismantling boarding of any description complete all as specified and directed. |
| 48 | S&F 100mm long hasp and staple, safety type, aluminium anodised including bolt to hinge plate and fixed with screws and fixed complete all as specified and directed. |
| 49 | S&F Mild steel butt hinge, 100 mm long, medium weight, cold rolledfixed with steel screws or welded to steel frame where required complete all as specified and directed. |
| 50 | S&F Galvanised iron steel water tubing, 15mm bore, medium grade with all fittings and fixed to walls and ceilings or laid in floors includingtaking up or down existing steel water tubing complete all as specified and directed. |
| 51 | S&F Galvanised iron steel water tubing, 20mm bore, medium grade with all fittings and fixed to walls and ceilings or laid in floors including taking up or down existing steel water tubing complete all as specified and directed. |
| 52 | Taking up or down existing steel water tubing, 15mm bore alongwith connections fixed/laid in any situation and fixing only, after cleaning old steel water tubing in new or old position using new fittings complete all as specified and directed. |
| 53 | Taking up or down existing steel water tubing, 20mm bore alongwith connections fixed/laid in any situation and fixing only, after cleaningin new or old position using new fittings complete all as specified and directed. |
| 54 | S&F in repair PVC low level flushing cistern (white) of 10 liters capacity with inlet ball float valve, PVC flush pipe and necessary fixing arrangements and connecting to water pipe and WC etc complete all as specified and directed. |
| 55 | S&F Vitreous china white squatting pan orrissa pattern of size 580mm x 440 mm with integral foot rests including necessary lime concrete and 100 mm bore cast iron ‘P’ or "S" trap with 550 to 600 mm long neck for connecting WC to branch piece with cement joints, fixed as in repair, complete all as specified and directed. |
| 56 | S&F in repair Viterous China wash down water closet pan (pedestal pattern), white incl. Seat and cover(excluding fixing bolts, flushing cistern and flush pipe) complete all as specified and directed. |
| 57 | S&F in Repair seat cover For WC, any colour pattern with flat bottom and cover mild steel hinging device complete all as specified and directed. |
| 58 | S&F in repairs vitreous china wash basin,white flat back,size (450X300) mm including 15 mm brass CP Pillar taps,waste coupling PTMT 32 mm,low density polylethylene pipes (LDPE) 32 mm dia 80 cm long, PVC conection15 mm dia 450 mm long,and bracket complete all as specified and directed. |
| 59 | S&F in repair 600x450 mm bevelled edge mirror of selected quality mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plug with chromium plated brassscrews and cup washers complete all as specified and directed. |
| 60 | S&F in repair 15 mm bore Bip tap cast copper alloy chomium plated with crutch or butterfly handle, screwed down,screwed for iron pipe or for brass ferrule. complete all as specified and directed. |
| 61 | S&F in repairs15 mm bib tapstandard of PTMT any colour high pressure screwed for iron pipe (Min wt 90 Gms). complete all as specified and directed. |
| 62 | All as per item 61 here in before but with long body. (Minimum weight -120gms) complete all as specified and directed. |
| 63 | S&F in repairs 15 mm stop valve of PTMT any colour high pressure screwed for iron pipe(Min wt. 90 gms). complete all as specified and directed. |
| 64 | S&F in repairs 15 mm concealed Stop valve/Angle valve cast copper alloy screwed down, high pressure screwed for iron pipe complete all as specified and directed. |
| 65 | S&F in repair 500 ltr capacity rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position including 20mm bore ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball, 20 mm PTMTstop valve screwed for iron pipe all as specified in SSR Part-I complete all as specified and directed. |
| 66 | All as per item no 65 here in before but 1000 ltr capacity complete all as specified and directed. |
| 67 | S&F in repairs 15 mm pillar taps,cast copper alloy, with capastan heads, chromium plated, screwed down high pressure, with or without lettered "Hot" or"Cold" with long screwed shanks and fly nuts, screwed for iron pipe complete all as specified and directed. |
| 68 | S&F in repairs 15 mm pillar taps,PTMT any colour high pressure, screwed for iron pipe and fixed (Min wt- 110gm) complete all as specified and directed. |
| 69 | S&F in repairs 20 ballvalve, high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball, screwed for iron pipe(Min wt. 210 gms) complete all as specified and directed. |
| 70 | S&F in repairs 15 ball valve, high pressure, of PTMT with epoxy coated aluminium rod and high density plastic ball,screwed for iron pipe ( min wt 142 gms) complete all as specified and directed. |
| 71 | S&FPVC connections 15mm size with PTMT nuts of length 450mm complete all as specified and directed. |
| 72 | S&F in 110 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls including distance pieces and stack clamps as in rain water pipes including taking down eaves gutters and RWP complete all as specified and directed. |
| 73 | S&F in 75 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls including distance pieces and stack clamps as in rain water pipes including taking down eaves gutters and RWP complete all as specified and directed. |
| 74 | S&F 110 mm bore PVC (SWR) bends/shoe any radius fixed to walls including distance pieces and stack clamps complete all as specified and directed. |
| 75 | S&F 75 mm bore PVC (SWR) bends/shoe any radius fixed to walls including distance pieces and stack clamps complete all as specified and directed. |
| 76 | S&F PVC waste pipe, 32mm bore suitable to waste coupling pipe attach with rubber ring joints fixed to waste coupling of sinks/WHBs complete all as specified and directed. |
| 77 | S&F PVC (SWR) floor trap 75mm, plain with grating including jointing with solvent cement complete all as specified and directed. |
| 78 | S&F in repair PVC cover for tanks of capacity 500 to 1000 ltrs including taking out old broken covers with GI nuts and bolts 3/16" dia and 1" long bolts with washers (8 Nos with each cover and 2 Nos hing bolts and nuts 8 mm dia 50 mm long complete all as specified and directed. |
| 79 | Resecuring or eashing & adjusting, without taking down of shutters of any description of exc. 1 Sqm but n.exc. 2 Sqm each complete all as specified and directed. |
| 80 | Demolition of un-reinforced cement concrete and M&L for Cement concrete type D-2, 1:4:8 in foundations, filling and mass-concrete complete all as specified and directed. |
| 81 | M&L for Sand filling under floors or in foundationincluding watering and consolidation complete all as specified and directed. |
| 82 | M&L for Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658 -2006 of 60mm thickness, M-35 Grade with grey cement & no pigment complete all as specified and directed. |
| 83 | M&Lfor Chequered cement concrete tiles 30cm x 30cm x 25mm thick, set, jointed and pointed in neat cement slurry With grey cement and pigments in floors over 15 mm thick screed bed 1:6 including demolition of Stone slabs and tiles of any description laid bedded and pointed in any mortar complete all as specified and directed. |
| 84 | M&L Machine cut kota stone slab flooring 20-25mm thick over 15 mm cement screed bed or bedding layers in CM 1:6 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing polishingand rounded or chamfered for nosing including demolition of Stone slabs and tiles of any description laid bedded and pointed in any mortar complete all as specified and directed. |
| 85 | S&F Granite (of any type) work 18-20mm thick (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including demolition of Stone slabs and tiles of any descriptionlaid bedded and pointed in any mortar complete all as specified and directed. |
| 86 | S&F in Repair to Viterous China bowl urinal flat back, size of 465 x 355 x 265 mm white (miniumum), with grating and union for discharge pipe (excluding flushing cistern, flush pipe and waste pipe)including providing and fixing plugs, bedding urinal agianst wall in cement mortar 1:2 securing urinal to plugs with and including 60mm long brass screws, pointing aroiund urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipee. (Exclusive of fixing supply pipe to flushing cistern, trap and waste pipe) complete all as specified and directed. |
| 87 | M&L Cement concrete (1:5:10) type E-2 using 40mm graded stone aggregate in foundations, filling and mass concrete, as in filling under sunken floor portion includingDemolation of unreinforcement cement concrete complete all as specified and directed. |
| 88 | M&L for Rendering/plastering, 10 mm thick in cement mortar (1:3) on concrete surfaces of sunken floor with WPC compound and applying bitumen blown any grade applied two coats to concrete surface / rendering at the rate of 1.5 kg per sqm per coat and treating the sunken floor complete all as specified and directed. |
| 89 | M&L APP modified polymeric membrane with mineral finish on top min 3 mm thick & weighing n. less than 3.5kgs/sqm with mineral reinforced with polyster non-woven fabric(wt n.less than 150gm/m2) laid over cold bituminous primer by torch application method with min overlap of 75mm on longitudinal direction & 100m in the transverse direction complete all as specified and directed. |
| 90 | Supply only integral water proofing compound (ISI Marked)complete all as specified and directed. |
| 91 | Dismantling asbestos cement (corrugated or semi corrugated) sheets and S&F Pre painted galvalume aluminium Zinc coating GI based corrugated steel sheet 0.5mm thick of an colour having tensile strength of 550 Mpa as in roof covering /cladding to wall fixed with self tapping screwsin roofing complete all as specified and directed. |
| 92 | Dismentlling timber in fillets, rails, posts, rafters, purlins, etc. under 40 sq. cm in section complete all as specified and directed. |
| 93 | M&LSteel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161- 1979 grade St.-24 complete all as specified and directed. |
| 94 | Demolition of mud phuska in roofs, any thickness, including leeping plaster (whether full thickness removed or only a part thereof) complete all as specified and directed. |
| 95 | M & L for 80mm thick average consolidated thicknessmud phuska on flat roof ncluding 25mm thick mud plaster complete all as specified and directed. |
| 96 | M&L 15 mm thick screed bed or bedding layer of mortar in CM(1:6) with water proofing compound @3% by weight of cement or as per manufacturer instructions will be on surface to have a smooth surface and Supply & fixing Polythene film, 50 micron thick, laid on a coat of bitumen primer, @ 0.30 to 0.50 kg per sq. m bitumen and laid on roof, complete all as specified and directed. Note: WPC shall be measured and paid separately |
| 97 | S & F 40 mm thick brick tiles laid on mud mortar and joints grouted flush in cement mortar(1:3) mixed with 5% of crude oil by weightof cement on mud phuska including Dismantling of brick tiles in roofsinglelayer jointed & pointed in cement mortar including removal of grass vegitation including roots complete all as specified and directed. |
| 98 | All as item No 97 above but except tiles complete all as specified and directed. |
| 99 | S & F in repair to Hollow PVC wall lining consisting of 5mm thick single side prelam PVC sheet instead of plain colour sheet inclusive of solvent cement and fixing on PVC frame complete all as specified and directed. |
| 100 | S&F in repair grating doom 100 mm dia of PTMT (Minimum weight 25 gms) complete all as specified and directed. |
| 101 | S&F in repair 20 mm gun metal,globe or gate valve, with iron wheel head , screwed both ends for iron pipe complete all as specified and directed. |
| 102 | S&F in repair brass Chromium plated shower roses 125mm with or without swivel joints, any size, including fixing to steel pipe or union complete all as specified and directed |
| 103 | S&F in repairsbrass chromium plated tubular towel rail, 20 mm dia, D type, 60 cm long between flanges complete all as specified and directed. |
| 104 | S&F in repair of pressure CP Jet for EWC incl PVC connection and CP fitting and complete all as specified and directed. |
| 105 | Demolition RCC Roofs, floors (other than ground floors), beams staircases, landing, chajjas, and similar suspended work complete all as specified and directed. |
| 106 | M&Lfor use & waste wooden form work (rough finished surfaces ) to sides & soffits ofChajjas, parapets & facia and similar work n. exc 200 mm thick, complete all as specified and directed. |
| 107 | M&L for RCC type B1,1:2:4 (20 mm graded Stone agg) as in Chajja, parapets & facia etc complete all as specified and directed. |
| 108 | Mild steel TMT Mild steel bars 10mm dia and over,cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with theincluding mild steel wire (annealed) not less than 0.9mmdia or securing with clips complete all as specified and directed. |
| 109 | M&L for rendering 5 mm thickon RCC shelves and projections in cement mortar (1:3) finished fair and even, complete all as specified and directed. |
| 110 | Supply only integral water proofing compound (ISI Marked)complete all as specified and directed. |
| 111 | S&F in repair 200 mm mild steel barrel tower bolt, stove enamelled black, with bright bolt complete all as specified and directed. |
| 112 | S&F in repair 150 mm mild steel pressed handles, oval type stove enamelled black complete all as specified and directed. |
| 113 | S&F in repair for250 mm Mild Steel sliding door boltsplate type, stove enamelled black, with bright boltnot less than 12 mm dia with and including a minimum 6 bolts and nuts, four on bolt plate and two on staple plate complete all as specified and directed. |
| 114 | Repair of Alu doors/windows of any size including rubber gasket beading/glazing clip, rawl plug/ screws including 5mm thick or any thickness plane glass/frosted glass/toughened glass of any thickness dirn given by Engr-in-Charge and including repair of alu Channel/Frame/Shutter including suitable aluminium handle/ tower bolts size given by Engr-in-Charge all as specified and directed. |
| 115 | S&F in Repair 100 mm aliminium Mortice lock, vertical type 2 Levers complete all as specified and directed. |
| 116 | S&F in Repair Door closer hydraulically regulated, designation No. 3, universal type, suitable for door hutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed Aluminium(extrudedbody section body) complete all as specified and directed. |
| 117 | M &L for Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed in repair complete all as specified and directed. |
| 118 | Taking down cement plaster &rendering 10 mm thick in CM (1:4) mixed with integral water proofing compound as per mfg instr over the roof concrete(For roof treatment) complete all as specified and directed. |
| 119 | M&L for water proofing treatment to roof surface includingparapet wall comprising with the following course of treatment/ specifications form bottom to top:- (a) Applying evenly a tack coat of industrial bitumen 85/25 @ 1.2 kg per sqm over a coat of bitumen primer @ 0.30 ltr per sqm including preparation of roof surfaces complete all as specified and as directed. (b) One layer of APP based polymeric membrane minimum weighing 3kg/sqm and minimum 3mm thick reinforced with polyster non wove fabric (wt. not less than 150 gms/sqm) land on primed surface by forced application complete all as specified. Polymeric membrane shall be taken to a height of 60 cm (minimum) and then inserted inside the groove of parapet walls and shall be finished by a membrane flashing. Note: (i) Laying of APP based membranes shall be done by torch on method or as per manufacturer"s instructions. (ii) A minimum overlap shall be 75mm length wise and 100 mm width wise ofpolymeric membranes respectively and sealed all overlaps and joints as manufacturer"s instructions. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
