Military Engineer Services-MES has published Tender For Special Repair To Bldg No P10 Office Complex Of Ge Danapur And Special Repair Works To Bldg No P18 Lp Stores At Mh Danapur Under Ge Danapur Cantt. Submission Date for this Tender is 23-05-2024. Building Work Tenders in danapur Bihar. Bidders can get complete Tender details and download the document.
| FileName | File Description | File Size |
| e1461451-fa40-4d8e-8693-6abfcdcda3d5.html | Tender Notice | 0 KB |
| BOQ_730042.xls | Tender Document | 0 KB |
| Credit8769.pdf | Tender Document | 0 KB |
| ParticularSpecification87_1.pdf | Tender Document | 0 KB |
| TenderDocument8769.pdf | Tender Document | 0 KB |
| Tendernotice_1.pdf | Tender Document | 0 KB |
| Sl. No. | Item Description |
| 1 | Dismantling of floor, walls tiles, roof tile, kota stone including bedding but not backing and rubbish off permises all as specified. |
| 2 | M&L for Coloured glazed ceramic tiles (450 x 300)x 6 to 7mm thick on vertical surfaces such as skirting, dados and risers to steps etc set and jointed in neat cement slurry and pointed in white or colored cement to match complete including 10 mm thick rendering on fair faces of brick work or concrete surfaces, in cement mortar 1:4 all as specified and directed for shade, pattern and laying of tiles complete all as specified and directed. |
| 3 | Taking down cement plaster on brick or stone walls etc. including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed. |
| 4 | M&L rendering 15 mm thick on fair faces ofbrick wallincement mortar (1:6) finished surface even and smooth without using extra cement, complete all as specified and directed. |
| 5 | M&L for rendering 15 mm thick in cement mortar 1:4, in two layers (1st layer 10 mm thick rendering coat and 2nd layer 5 mm thick finishing coat) on brick work or concrete surfaces,second layer (finishing coat)mixed with liquid water proofing compound @ 200 ml / 50 Kg bag of cement as per manufacturer"s instructions and finished the surfaces even and fair without using extra cement complete all as specified and directed. Note:Liquid WPC will be measured and paid separately. |
| 6 | Supply only water proofing compound (liquid),ISI marked complete all as specified and directed. |
| 7 | M&L Cement concrete work in pavement/hard-standing of flexural strength 40kg/per square centimetre in field using400 kg of cement per cubic metre,thickness of concrete 25 cm or less? in floor etc complete |
| 8 | M&L for forming 12mm thick expansion joints(slab thickness 100mm) filled with pre-formed bituminous filler and top 30mm primed and sealed with sealing compound, Grade "A" ? in floor etc complete |
| 9 | M&L PCC 1:4:8 type D-2 (40mm graded stone agg) in fdn, sub base, mass concrete& cinder concrete etc. complete. |
| 10 | Dismantling of timber scantling 40 Sqcm and over in section, in any position as in Unframed work complete all as specified and directed. |
| 11 | M & L for Hardcore of gauge not exc. 63 mm, deposited, spread and leveled in layers not exc. 15 cm thick, watered and rammed to a true surface using broken bricks complete all as specified and directed. |
| 12 | M&L demolition of Reinforced brickwork in suspended slabs, beams, lintels etc. in cement concrete workmortar or cement concrete(reinforcement cut as required to facilitate demolition)etc complete |
| 13 | M & L for providing reinforced cement concrete M-25 Design Mix using 20 mm graded stone aggregate as in foundation including rafts, footing, foundation beams, plinth beams, bases for columns, basement slabs, under-reamed piles and mass concrete complete all as specified and directed. (Note :- Reinforcement shall be measured and paid separately under respective item) |
| 14 | Use and waste of formwork to sides of concrete foundation, footing, bases of columns, raft & raft beams, sides and soffits (if any) of foundation and plinth beams; and similar works; in rough finished flat surface of concrete complete all as specified and directed. |
| 15 | M & L for mild steel TMT bars 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed. |
| 16 | M & L for mild steel TMT bars 5 mm dia and over upto as in stirrups, spacers and binders, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed.. |
| 17 | Demolition of brick work built in cement mortar including all quions, arches, pillars, etc complete all as specified and directed. |
| 18 | M&L Brick work with sub class "B" bricks straight or curved on plan exc 6m mean radius built in CM (1:6) complete all as specified and directed |
| 19 | ~Ditto~ all as per item Ser No 18.00 above but except bricks complete all as specified and directed. |
| 20 | Taking down chowkats or frame with shutters (without taking off shutters from the frames) n. exc 1.5 Sqm each complete all as specified |
| 21 | Taking down chowkats or frames exc 1.5 Sqm but n.exc. 4 Sqm each with shutters (without taking off shutter from the frame) complete all as specified and directed. |
| 22 | S & Fpressed steel frame of size 125 X 60 mm and 1.25 mm thick MS sheet for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plates etc.,complete all as specified and directed. |
| 23 | S & F of 35 mm thick (Batten thickness) factory made plain, framed, panelled shutters (Two panels) with lock rail and panel of 9 mm thick BWP commercial ply or 12 mm thick veneered particle board with commercial veneering on both faces and size of the members of shutter are as per IS – 1003 (Part – I) made of kiln seasoned & chemically pressure treated 2nd class hardwood complete all as specified and directed. |
| 24 | S&F 2nd class hard wood 35 mm thick glazed and gauzed skelton shutters, open rebated and prepared to receive glass, gauze etc (with sash bars) edges of framing plain, chamfered or rounded, fitted with cut and shutters as specified in SSR Part I, complete all as specified and directed |
| 25 | S & Fpowder coated aluminium window sliding shutter three track with following specification:- (a)chowkhat frame of size 81.25 x 38.10 x1.25 mm @ 0.781Kg/RM (b)Style/Vertical member of size 47.62 x 44.45 x 1.18 mm @ 0.667Kg/RM (c)Top and bottom rail of size 47.62 x 44.45 x 1.18 mm @ 0.667Kg/RM (d)Partialy 0.36 mm dia stainless steel wire netting mosquito proof with fixing arrangment. (e)Partialy 5.00 mm thick tinted glass fixing with rubber gasket. (f) Aluminum and PVC beading as per requirment as in fixing for paticle board & Glass, joing cleat including locking arrangement. etc Make : Jindal/Hindalco |
| 26 | S & F steel window with side hung shutters including projecting or box stype hinges with steel handle peg stay and divided into square with glazing bars dovetailed or welded, to receive glazing, or gauzing including one coat of primer with including fixing of hold fast of size 25 x 5 mm flat iron etc complete all as specified and directed. |
| 27 | S&F 4 mm thick figured sheet glass pin head type fixed in aluminium ventiliators with necessary rubber and powder coated aluminium snap beading complete all as specified. Make : Modi Float, Saint Gobin |
| 28 | S&Fstainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staple complete all as specified. |
| 29 | Demoliton of cementconcrete in ground floor paving n exc 15cm thickness (below or above ground level) complete all as specified and directed. |
| 30 | M&L for 75mm thick PCC 1:3:6 type C2 using 40mm graded stone aggregate/plinth protection laid in suitable panels finished even and fair all as spd .6mm Joints should be filled with bitumen mastic filling comprising of one part of heated bitumen 85/25 or 80/100 gde and three part of sand ( all by weight) complete all as specified and directed. |
| 31 | M&L forpreparation of newly plastered surfaces and applyingtwo coats of oil bound distemper over a coat of primer over and including 2 mm thick Birla/ JK wall puttycomplete all as specified and directed. |
| 32 | M&L for preparation of newly plastered surfaces of wall & applying two coats of cement base paint over a coat of primer complete all as specified and directed. |
| 33 | M&L for preparation of old painted wooden surfaces of any description, not otherwise described, over 10cm width or girthand applying one coat of synthetic enamel paint complete all as specified and as directed |
| 34 | M&L for preparation of new or untreated steel surface of any description exc. 10 cm. in width or girth and applying two coats of synthetic enamel paints, over a coat of red oxide primer, complete all as specified. |
| 35 | Cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels etc., and cutting chases for concealed water tubing or concealed conduit wiring, etc and making good, cutting not exc 10 CM girth all as specified and directred |
| 36 | Taking up or down steel tubing and connections, of 15 mm dia complete all as specified and as directed. . |
| 37 | Taking up or down steel tubing and connections, 20 mm dia complete all as specified and as directed. |
| 38 | Re-fixing old 15 mm bore old steel water tubing and connection in new or old position (wall, ceiling, floors etc) including cleaning of old pipes and provision of new GI fittings as required complete all as specified and directed. Note: - Old steel water tubing obtained from dismantling shall be used under this item. |
| 39 | Re-fixing old 20 mm bore old steel water tubing and connection in new or old position (wall, ceiling, floors etc) including cleaning of old pipes and provision of new GI fittings as required complete all as specified and directed. Note: - Old steel water tubing obtained from dismantling shall be used under this item. |
| 40 | S&F 15 mm bore GI Tubing medium grade with GI fittings such as elbow, union, socket fixed to walls, ceilings or laying in floors incomp all as spd and directed |
| 41 | S&F 20 mm bore GI Tubing medium grade fixed with GI fittings such as elbow, union socket to walls, ceilings or laying in floors incomp all as spd and directed |
| 42 | S&FGIwire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staple complete all as specified. |
| 43 | S&F 150mm long aluminum anodised barrel tower bolts of extruded section complete all as specified and directed.. |
| 44 | S&F Aluminium handles, extruded fabricated type, anodized 125 mm size comp ISI Marked complete all as specified and directed |
| 45 | S & F 250 mm longAluminium alloy, anodised, sliding door bolt with hasp,staple (bolt type and fixing clips of sheet, cast or extruded section or cast aluminium alloy etc all complete all as specified and as directed.. |
| 46 | S&F 100 mm size butt hinges extruded aliminium alloy with galvanised MS hinge pin Type B-21 complete all as specified and as directed. |
| 47 | M&L cutting holes in brick walls built in cement mortar superfacial area nexc 150 Sq cm complete all as specified and as directed. |
| 48 | S & F of steel work as in tubular rectangular/square trusses including special shaped washers etc. complete using ERW or induction butt welded tubes conforming to IS – 1161 – 1979 grade St – 240 complete all as specified and directed. |
| 49 | S&F Mild Steel Plate girder or single stanchions, built up of one beam or channel section with flange plates, caps, bases, splices, angle bracket, cleat and other connection conforming to Fe-410-W (Grade E-250) "A" quality complete all as specified and as directed by Engr-in-Charge. |
| 50 | S&F pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of colour having tensile strength of 550 Mps as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed by E-in-Charge |
| 51 | Dismantling of corrugated or semi corrugated Asbestos Cement (AC) sheets in roof covering complete all as specified and directed. |
| 52 | M & L for 15 mm thick screed bed or bedding layer in cement mortar 1:6 for laying floor finishes finished even and rough complete all as specified and directed. |
| 53 | M&L forMachine cutkota stone slab flooring 20-25mm thick over and including 15 mm thick in CM 1:4 cement screedbase laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing, grinding and mirror polishing completeall as specified & directed. |
| 54 | M&L Preparing old wooden surfaces exceeding 10Cm in width or girth and applying one coat of synthetic enamel paint complete. |
| 55 | M&L Preparing old steel surfaces exceeding 10Cm in width or girth and applying one coat of synthetic enamel paint complete. |
| 56 | M&L for applying two coats of oil bound distemper on ceiling over a coat of primer on prepared surfaces including, rubbing with sand paper complete all as specified and directed. |
| 57 | M&L Preparing old painted surfaces of walls, chajjas etc by washing rubbing down and stopping and applying two coat of cement base paint white or tinted complete all as specified as directed. |
| 58 | M&L Felling of tree exc. 30 cm girth including cutting of trunk, and branches and stacking of serviceable material and disposal of unserviceable material to a distance n exc. 50 m andclearing site ®complete all as specified as directed. |
| 59 | M&L for durastone heavy duty coloured vitrified tiles 300x300x9-10 mm thick with 15mm thick 1:6plaster exterior grade set and jointed with neat cement slurry and painted in coloured or white cement to match complete all as specified. |
| 60 | M&L for two coats of Apex weather paint on newly plastered surfaces over a coat of primer including preparation of surface complete all as specified and as directed by Engr-in-Charge. |
| 61 | M & L for Non skid ceramic colour tiles (square / rectangular) of 7 to 8mm thick, area of each tile exceeding 0.11 sqm but not exc. 0.18sqm as in floor etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface overand including 15 mm thick screed bed (1:6) etc complete all as specified and directed. |
| 62 | M&L 25mm thick PCC 1:2:4 type B-0(using 12.50mm graded stone aggregate), as in floor including finishing the surface rough & even for receiving kota/tiles complete all as specifiedand directed . |
| 63 | M & L for brick work with sub class ‘B’ old size bricks, in half brick thick wall built in cement mortar 1:4 complete all as specified and directed. |
| 64 | S&F for powder coated(minimum thickness of powder coating 50 micron) aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified. |
| 65 | S & F Powder coated aluminium (minimum thickness of powder coating 50 micron) for shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/neoprene gasket required (Tower bolt shall be paid for separately) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws all complete as per architectural drawings and the directions of Engineer-in-charge. |
| 66 | Solid PVC door frame of size 50mm x47mm made out of 5mm plain clour PVC sheet reinforced with MS square tube, supplying and fixing in opening as per specification and drawing complete all as specified and directed. |
| 67 | S&F Factory Made Solid PVC Moulded Door Shutter, & kitchen cupboard shutters with particle board core 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing all as spd.. Make approved by GE.. |
| 68 | S&F aluminum alloy anodised sliding door bolts with hasp & staple & fixing clips of sheet cast extruded section & fixing bolts & sliding bolts of extruded section 150 mm long complete all as specified and directed. |
| 69 | S&F 150 mm extruded aluminium alloy handles, fabricated type anodised complete all as specified. |
| 70 | M & L double action floor spring for aluminium doors hydraulically regulated made up of minimum1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed including necessary cutting & making good to floor as per existing complete all as specified and directed. Make - Kelwyn / Amar |
| 71 | S&FGI wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with stainless steel wire staple complete all as specified. |
| 72 | S & F 3 mm thick ordinary glass pin head type and glazing with oil putty in squaresexc 0.5 Sqm in each pane etc complete all as spd and directed. |
| 73 | S & F 5 mm thick figured glass pin head type and glazing with oil putty in squaresn exc 0.5 Sqm in each pane etc complete all as specified and directed. |
| 74 | S&F in repair vitreous china WHB size 550x400 mm white flat back including pvc waste pipe but excluding taps, waste, chain & plug & porcelain stopper but including mild steel brackets with two coats of synthetic enamel painting over a coat of red oxide primer etccomplete all as specified and directed. |
| 75 | S&F in repairs white vitreous china wash down water closet pan pedestal pattern (white) excluding fixing bolts, flushing cistern and flush pipe complete all as specified and directed. |
| 76 | S&F in repair 10 Ltr capacity PVC valveless shyphonic action type low level flushing cistern white with inlet, ball valve, float valve and handle incl bracket and flush pipe fixed to wall ,complete all as specified and directed. |
| 77 | S&F in repair plastic water closet seat cover, Cream / whitecolour, closed pattern with flat bottom and cover and mild steel chromium plated aluminium hinging device for pedestral pattern WC complete all as specified and directed. |
| 78 | S&Fin repair cast copper alloy CP two way angle valvewith wall flanges 15 mm bore, screwed down, screwed for iron pipe or for brass ferrule complete. |
| 79 | S&F in repairs PVC connection 15 mm dia size and 450 mm long with 2 Nos brass check nuts its washers complete all as specified and as directed. |
| 80 | S&F in repair 5.5mm thick looking mirror selected quality glass n.exc 0.50Sqm each and fixed to wall with brass screws, cup and washers including polishing, rounded off edges of glass and drilling holes in glass complete all as specifed and as directed. |
| 81 | S & Fbib tap 15mm cast copper alloy chromium platedwith crutch butterfly handle, screw down screwed for iron pipe or for brass ferrule etc complete all as specified and directed by the Engineer-in-Charge. |
| 82 | S&F 15mm bore pillar tap cast copper alloy fency type with capastan head chromium plated screwed down high pressure with or without lettered “HOT or “COLD” with long screwed shanks and fly nuts, screwed for iron pipe. |
| 83 | S&F in repair angle cock 15 mm bore fancy type brass chromium plated, screwed down, screwed for iron pipe or for brass ferrule fixed to iron pipe. |
| 84 | Taking down AC/PVCpipes (including all fittings), with spigot and socket ends and lead joints including burning out joints of 100 mmdia pipe. |
| 85 | S&F PVC (SWR) pipes 110mm bore single socketed in any length with rubber ring joints laid in floors, trenches complete all as specified and directed. |
| 86 | M & L PVC(SWR) bend of110 mm dia of any radius etc complete all as specified and directed. |
| 87 | S&F PVC (SWR) vent cowl of 110 mm dia complete all as specified and directed. |
| 88 | S&F PVC (SWR) nahani/ floor trap, plain with grating with or without waste hole including jointing with solvent cement 75mm dia etc complete |
| 89 | Taking down carefully copper / aluminium point wiring (light, fan, switch,socket or power, Bell & Two way point) complete with fitting such asswitches, sockets, ceiling rose,sketch light fittings etc, and making good the disturbed surface ofwalls and floors etc complete all as specified and directed. |
| 90 | Taking down carefully main switches DB"s/ MCB DB"s and making good the disturbed surfaces of wallsetc complete all as specified and directed. |
| 91 | Taking down carefully copper / aluminium sub mainwiring including teak wood batten / conduit and making good the disturbed surface of walls as directed. |
| 92 | M & L for Point wiring with PVC insulated and PVC unsheathed electric FRLS cable of 1100V single core having multi stranded copper conductor of size 1.5 Sqmm nominal cross sectional area & including non metallic rigid PVC conduit ISI marked medium grade not less than 20 mm dia with all conduit accessories in concealed wiring system by cutting of wall and making good disturbed surface of wall (cutting except on ceiling for fan point only, on ceiling instead of PVC conduit on surface will be used) & 1.5 sqmm green PVC insulated unsheathed copper conductor as a earth wire connected to earth dolly by providing lugs including 1.6mm thick anodised pressed steel sunken box covered with 3mm thick hylum sheet for mounting switches, sockets, fan regulators etc for one light/fan controlled by one switch complete all as specified and directed. |
| 93 | All as per item no 92 above but one bell point controlled by one bell Push |
| 94 | All as per item no 92 above but one 5 Amps socket out let point controlled by one switch on same board with other switches. |
| 95 | All as per item no 92 above but one 5 Amps socket out let point on independent board controlled by one switch. |
| 96 | All as per item no 92 above but wiring with 2.5 sq mm single core copper conductor for one socket out let 15/16 amps point on the independent board. Make of cable: Polycab/Havell"s/Finolex and Make of PVC conduit: Plaza/Harsh/Kalinga Premium/AKG. |
| 97 | Supply and fixing in repair modular Switch6 Amps single pole, one waycomplete all as specified and directed . |
| 98 | Supply and fixing in repair Modular Socket outlet, multi purpose, 5 Pin 6 Amps flush typecomplete all as specified and directed . |
| 99 | Supply and fixing in repairModularSwitch 16 Amps single pole, one waycomplete all as specified and directed . |
| 100 | Supply and fixing in repair Modular Socket outlet, multi purpose, 6 pin 16 Amps universal socketcomplete all as specified and directed . |
| 101 | Supply and fixingfor modular Fan regulator 120 watt 2 module complete all as specified and directed. |
| 102 | Supply and fixing switch piano flush button single pole one way 5 amps, 240 Volts complete all as specified and directed. |
| 103 | Supply and fixing in repair Modular Switch 16 Amps single pole, one way complete all as specified and directed. |
| 104 | Supply and fixing in repair Modular Scoket outlet, multi purpose, 6 pin 16 Amps universal socket complete all as specified and directed. |
| 105 | Supply and fixingsocket outlet flush type 5 Amps, 5 pin, 240 Volts complete all as specified and directed. |
| 106 | Supply and fixing switch piano flush button single pole one way 15 Amp 240 volt complete all as specified and directed. |
| 107 | Supply and fixing in socket outlet flush type multipurpose 2 in1, 3 pin 5 and 15 Amp, 240 volts complete all as specified and directed. |
| 108 | Supply and fixing bell push single pole, 6 Amps, 240 Volts, flush type complete all as specified and directed. |
| 109 | Supply and fixingfor electronic Fan regulator 450 watt step type complete all as specified and directed. |
| 110 | Supply and fixing Ceiling rose surface bakelite 63.5 mm dia three terminal complete all as specified and directed. |
| 111 | Supply and fixing for batten/angularfittings complete all as specified and directed. |
| 112 | Supply and fixing double door Vertical TPN DBs four way of powder coated DB"s suitable for MCCB upto 125 Amps incomer and MCB"s fitted with bus bar,Neutral link,Earth bar and din ral & DB"s will be fitted concealed in wall / surface as per site required complete all as specified and directed. Make : L&T, Cat No: DBVTL004DD/ Legrand/Siemens. |
| 113 | Supply and fixingdouble door SPN DBs eight wayof powder coated DB"s suitable for MCB"s fitted with bus bar,Neutral link,Earth bar and Din ral as per existing finishing complete all as specified and directed . |
| 114 | Supply and fixing with MCB SPN 5 to 40 amps 10 KA ,C-series including connection with suitable size aluminium / copper lugs complete all as specified and directed . |
| 115 | Supply and fixingMCB SP 240 volts 5 to 32 Amps, 10 KA breaking capacity,"C" type including connection with suitable size aluminium / copper lugs complete all as specified and directed . |
| 116 | Supply and fixing MCCB 63 amps 16 KA, 4 pole including connection with suitable size aluminium / copper lugs complete all as specified and directed. Make: Legrand/Schneider/L&T. |
| 117 | S&F in LED tube light fitting batten type single tube 1x 18/20 watt 230 voltwall/ ceiling mountedluminaireindustrial type made of sheet metal box type suitable for T- 8 tube complete with electric electronic driver and bipin holder includingone no tube 18/20 wattfixed with wall/ceiling incl fittings accessories and connecting with all accessories internally pre wired and incl connecting up with twin core twisted flexible copper conductor cable suitable size all as specified. Make- Bajaj/Surya/ Havells / Crompton Greaves |
| 118 | Supply and fixing LED bulk head 10 watt fittings environmental friendly ultra modern energy saving surface mounted decorataive bulk head fitting with electronic driver and prewired and necessary electric connection with PVC insulated twin twisted flexible copper wire of size 0.75 Sqmm complete all as specified and as directed. Make: Crompton, Cat No: LBHP-10-CDL or equivalent model of Bajaj/Havells. |
| 119 | S&F surface/recessed mounting fitting 36 watt ultra modern design architectural LED luminaire which provides soft-light and glare free symmetrical illumination suitable for Armstrong / Grid Ceiling including LED driver and 36 watt lamp incl all accessories complete all as specified and as directed. Make, Havells / Philips / Bajaj / Crompton Greaves |
| 120 | Supply and fixing metal body air fan / ventilator with louver 300 mm sweepand grouting withnut , bolts & Fastenaron the wall and make good the disturbed surface and electric connection with 1.5 Sqmmthree core PVC insulated round flexible copper conductor and sheathed cable upto ceiling rose complete all as specified and directed . |
| 121 | Supply and fixing LED light fitting for bldg security lighting energy saving & environmental friendly long life versatile pressure die-cast housing with individual high power LED as light source and lens embedded PC cover of capacity 25 watt 240 volts AC 50 Hz , IK 07 and IP 66 protection suitable for 40 mm dia GI pipe bracket including complete all as specified and directed. Make:Havells Cat No: ENDURAPEARLSL25WLED757SASYTOPCMP /CG/PHILIPS/BAJAJ |
| 122 | M & L for security wall light bracket made out of GI pipe light grade 25 mm dia 1.2 metre length bent to shape and reduced to required size at top upto 1.5 metre length by cutting, welding and well finishing including MS clamp of flat iron of size 40x6 suitable length 2 sets complete with drilling, hole, fixing with nuts bolts and washers including painted with two coats of aluminium paints over a coat of red oxide primer including dismantling one complete all as specified and as directed. |
| 123 | Taking down ceiling fan of any sweep, keeping with safe custodyand refixing the same with replacement of unsv3 corePVC insulatedPVC sheated 3 core multistrandedcopper conductor cable of size 23/ 0.193 from ceiling rose to fan terminal over hauling the fan complete all as specified and as directed. |
| 124 | Supply and fixing ofdown rod for ceiling fan made out of 15 mm dia MS pipe complete with holes, and MS strip clamp with slotted or threaded upto 1.0 mlong all as per site requirement specified and directed by Engg-in-charge. |
| 125 | M&L for Sub main wiringtwo single core PVC insulated unsheathed cable 1100 volts grade, 4 Sqmm size with multistranded copper conductor, drawn in but excluding non metallic rigid PVC conduit including PVC insulated unsheathed 2.5 Sqmm cable with multistranded copper conductor green PVC insulated as contineous earth conductor cable connected to earth dolly complete. |
| 126 | Supply & fixingin repair Sheet metal earth plug, socket, single pole and neutral with single pole MCB 32 Amps 240 volts fixed in repairs complete. |
| 127 | Supply and fixing ofEarthing to panel with galvanised steel earth plate electrode60cm x 60cm x 6mm thick, buried directly in ground (earth pit not less than 2.25m below normal ground level) with top edge of earth plate not less than 1.5m below normal ground level connected to galvanised earth lead wire 4.0mm dia by means of bolts, nut, check nuts and washers of galvanized iron or steel all as shown in electrical plate No.3 of MES Schedule pt-I 2009, GI earth lead strip protected by GI pipe 40 mm dia light grade and connected to earth test point includingexcavation in any type of soil,returning filling, disposal of soil, providing charcoal dust and common salt upto top edge of earth plate, construction of PCC pit with RCC cover, funnel, watering pipe of 20mm dia GI light grade and provision of earth test point including testing on completion complete |
| 128 | Supply and fixing MCB TPN40amps 10 KA ,C-seriesincluding connection with suitable size aluminium / copper lugs complete all as specified and directed . |
| 129 | Supply and fixingLED tube light batten box type with decorative end caps suitable single tube 1x 18/20 watt T8 lamps type complete with both end bi-pin holder including one no. of LED tube rod 18/20 Watt and all accessories internally pre wired and fixed to wall/ceiling incl fittings accessories and connecting with all accessories internally pre wired and incl connecting up with twin core twisted flexible copper conductor cable suitable size all as specified. Make-Havells/ Bajaj/Philips/ CG. |
| 130 | Supply and fixing high performance metallicbody exhaust fan 300 mm sweep size, 240 volts AC 50 Hz, 1400 RPM with connecting up to ceiling rose/ connector by three core sheathed copper conductor cable of suitable size including cutting wall and making hole in round shape of suitable size making good the disturbed surface to its original specification from both inner and outer side of wall and four nos suitable size nuts, bolts and washer with proper grouting in wall complete all as specified and directed. Make : Havells, Cat No: Turbo Force SP or equivalent model ofBajaj/Usha/Crompton Greaves. |
| 131 | Supply and fixingof GI tubing, light grade, 40 mm bore with all fitting lais in ceiling / wall for hanging of ceiling fan complete all as specified by EIC. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
