Military Engineer Services-MES has published Tender For Special Repairs To Bldg No P 89 And Toilet Block Urinal Adjacent Of Bldg No P 94 2 And Provision Of Stores At Mil Stn Dhrangadhra. Submission Date for this Tender is 21-05-2024. Building Work Tenders in dhrangadhra Gujarat. Bidders can get complete Tender details and download the document.
| Sl. No. | Item Description |
| 1 | Excavating in trenches not exceeding 1.5m wide and not exceeding 1.5 m in depth n.exc 10 sqm on plan for foundation of pole, laying of cables etc in soft/disintegrated rock and getting out complete all as specified and directed. |
| 2 | Excavating in trenches not exceeding 1.5m wide and not exceeding 1.5 m in depthfor foundation of pole,laying of cables etc in hard and dense soiland getting out complete all as specified and directed. |
| 3 | Returning fillingin including spreading, leveling, watering and well ramming in layer not exc 25 cm in soft/distengrated rock complete all as specified and directed. |
| 4 | Returning filling in, including spreading, leveling, watering and well ramming in layer not exc 25 cm with soil obtained from excavation complete all as specified and directed. |
| 5 | M&L for providing dry river sand as in sand cushioning to UG cable including punning gently complete all as specified and directed.Note: Depth after punning shall be measured and paid separately. |
| 6 | Removing excavated material (Soil) not exc 50 mtr and depositing where directed at a level not exc. 1.5m above the starting point complete all as specified and directed. |
| 7 | Removing excavated material exc. 1.50 km but n exc. 5 km and depositing where directed in Soft/ disintergrated rock complete all as specified and directed. |
| 8 | M&L for hard core of gauge exc 63mm but n exc 100mm deposited, spread and levelled in layers n exc 15cm thick watered and rolled/rammed to a true surface completed all as specified and directed. |
| 9 | M&L for Treating the backfill in contact with foundation at the rate of 7.5 litres of emulsion per square metre of vertical surface (Area of the sub structure in contact with backfill to be measured) complete all as specified and directed. |
| 10 | M&L forTreating the top surface of filled earth at the rate of 5 litres of emulsion per square metre of surface complete all as specified and directed. |
| 11 | M&L PCC (1:4:8) C-2 using 40mm graded stone aggregate as in foundation filling and mass concrete as in foundation filling and mass concrete all as completed as directed. |
| 12 | M&L cement concrete 1:4:8 type D-2(using 40mm graded crushed stone aggregate) as in foundations filling and mass concrete complete all as specified and directed. |
| 13 | M&L for Cement Concrete type B-2, 1:2:4 using 40 mm graded crushed stone graded agg as in fdn filling and mass concrete (water storage tank platefom) complete all as completed as directed. |
| 14 | M&L for plain cement concrete 1:2:4 type B-1 using 20mm graded stone aggregate for padestal/coping around poles, including necessary form work, finishing even and smooth without using extra cement, all as specified and directed. |
| 15 | M&L, precast cement concrete Block Masonary with solid blocks type C1, 1:3:6(20mm graded stone aggregate) exc 10 cm in width and setting in mortar 1:6 complete all as specified and directed . |
| 16 | M&L for 1:2:4 type B0 (suing 20 mm graded stone aggregate) for Beams, cantilevers, bressummers, lintels over 1.5m span complete all as specified and directed. |
| 17 | M&L for RCC 1:1:5:3 type A-1 as in slabs supported on walls, beams and columns in floors, roofs, landings, fixed with tined tacks or galvanized wire staples complete all as specified and directed. |
| 18 | M&L for old size fly ash Brick work with sub class "B" bricks, straight or curved on plan exc. 6m mean radius built in cement mortar 1:6 complete all as specified and directed. |
| 19 | Supply and laying sub class old "B" burnt bricks, laid as cable protection cover complete all as specified and directed. |
| 20 | Rough finished flat form work to soffits of suspended slabs such as roof slabs, floor slabs and similar worknot exce 200 mm thick complete all as specified and directed. |
| 21 | Use & Waste Form workfor rough finished surfaces of concrete measured flat for Lintel Bends complete all as specified and directed. |
| 22 | Taking down chowkats or frames with shutters (without taking off shutters from the frames) not exc. 1.5 sqm each complete all as specified and directed. |
| 23 | Taking down chowkats or frames with shutters (without taking off shutter from the frames) exc. 1.5 sq.m but not exc. 4 sq.m each complete all as specified and directed. |
| 24 | S&F, factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of MS tube for top and bottom rails. MS frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail, panelling of plain colour PVC sheet to be fitted in the M.S. frame welded/ sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, supplying and fixing in the frame at site complete all as specified and directed. |
| 25 | S&F, solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS Square tube, supplying and fixing in opening as per specifications complete all as specified and directed. |
| 26 | S&F, aluminium anodised, barrel tower bolts of extruded section with length of bolt 200 mm and fixed complete all as specified and directed |
| 27 | S&F, butt hinges, 100 mm long extrucded aluminium alloy withgalvanized mild steel hinge pin, anodized and fixed, complete all as specified and directed. |
| 28 | S & F Aluminium handles, cast type, anodised 150 mm long complete all as specified and directed. |
| 29 | S&F extruded aluminium alloy handles, fabricated type, anodised of size 150 mm complete all as specified and directed. |
| 30 | S&F Hat pegs, solid body 125mm to 175mm cast iron or mild steel fixed with brass screw and wooden/plastic cleats complete all as specified and directed. |
| 31 | S&F, Harrison rails, mild steel, chromium plated with fixing brackets, stops, rollers etc. complete all as specified and directed. |
| 32 | S&F galvanised mild steel wire cloth 0.56 mm nomonal dia of bar and 1.18 mm avrage width of aperture ,fixed with tined tacks or galvanised wire staples complete all as specified and as directed. |
| 33 | S&F M.S Framed work such as grills gratings etc with ends of bars sholdered and/or riveted into spikes ,framed guard bars /railings all as directed . |
| 34 | M&L for TMT 10mm dia bar and over, as in stiffeners, cut to length, bent to shape required, including cranking, bending, hooking ends, binding with and incluing mild steel wire(annealed) not less than steel wire 0.9mm dia or securing with clips complete all as specified and directed. |
| 35 | M&L for TMT bar 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders of Grade-500d incl cutting, bending, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed0 not less than 0.9mm dia or securing with clips complete all as specified and directed. |
| 36 | Fixing only rolled mild steel section as in main and cross beams hip and jack rafters, purlins where connected to common rafters and running rails and guides for sliding door fixed with angle cleats or other connecting plates conforming to Fe-290, Gde E-165 all as specified and directed. |
| 37 | S&F, rolled mild steel section as in main and cross beams hip and jack rafters, purlins where connected to common rafters and running rails and guides for sliding door fixed with angle cleats or other connecting plates conforming to Fe-290, Gde E-165 all as specified and directed. |
| 38 | S&F, compound girders and stanchions, lattice girders, aerial masts, staging for water tanks and the like including caps, bases, splices etc. built up from two or more beam or channel sections or angles with plates, including all lattice bars, stiffeners, gusset plates, etc. conforming to Fe-410 W complete all as sepcifeid and directed. |
| 39 | S&F mild steel work in weather shed posts, main and cross beams, hip and jack rafters, purlins, including special shaped washer etc. complete using ERW or induction butt welded tubes, conforming to IS 1161-1979, Gde St-240 complete all as specified and directed. |
| 40 | S&F powder coated aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified. |
| 41 | S&F standard aluminium section powder coated any colour as approved for three track window/door frames/shutters sliding/ partitions etc including jointing cleat and rubber eading/linning, Pivot ,locking aragement and all hardwareetc and fixed in position with stainless steel screws all as specified and as directed. |
| 42 | S&F, plain aluminium sheeting 0.56mm thick, alloy 31000 H4 in ridges, hips, valley gutter, drip and straight flashing (length and girth as fixed) complete all as specified and directed. |
| 43 | S&F, in repair, pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet, 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed. |
| 44 | M & L Pre- painted galvalume aluminum zinc coating GI based plain steel sheet 0.50 mm thick of an colour (as approved by GE) having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws all as specified and directed. |
| 45 | S&F, in repair, false ceiling, at any height, 600 x 600mm grid with Armstrong "Prelude XL 32" grid system and 16mm thick mineral fibre acoustic tile "RH - 99 Classic lite" with suspension system complete all as specified and per manufacturer"s instruction. Make : Armstrong or equivalent as approved by GE. |
| 46 | S&F, in repair 10mm thick PVC insulation panel with EPS stuck to 1mm plain PVC sheet suitably placed in false ceiling grid made of anodised Aluminium snap grid frame work size 605 x 605 mm as pr specification and drawing complete all as specified and directed. |
| 47 | S&F standard aluminium section powder coated any colour as approved forwindow frames/shutters sliding/ partitions etc including jointing cleat and rubber eading/linning, Pivot, locking aragement and all hardwareetc and fixed in position with stainless steel screws all as specified and as directed. |
| 48 | S&F anodized aluminium door & frame powder coating (minimum thickness of powder coating 50 micron)2 mm thick incl 5.50mm thick tinted glass, fixed with anodized aluminium snap beading, glazing clips, joining clips, screws and 02 Nos of aluminium handle on each door shutter, aluminium anodized tower bolt 200mm long 02 Nos on each shutter and mortice lock device complete with double keys for each lock, 01 No floor spring for each shutter complete all as specified and directed with following specifications :- (a) Aluminium door frame =101.50x44.45mm (b) Aluminium style/top & middle rails of shutter=83.5x44.45mm (c ) Aluminium bottom rail of shutter=114.50x44.45mm (d) Aluminium door frame with shutters shall be fixed in position in brick wall opening as required according to site conditions including all fastening arrangements etc complete all as specified and directed. |
| 49 | S&F, 8mm thick of size 605 x 605mm HSPC (high pressure Stem Cured) pre-primetered self embossed, textured disigner board E-board classic to be fixed anodised alunimium snap grid/section size 605mm x 605mm with main runner, fross tee and wall angle duly suspended with 4mm dia GI bar hangers 1200mm centre to centre both ways fixed with steel dash fasteners or from purlin from the roof with alignment clip including providing procisions for light fixtures of any size complete all as specified and directed. |
| 50 | M&L for 12mm thick prelaminated particle board, interior grade, prelaminated both side with decorative choice laminations fied with screws to timber frame and etc. work complete all as specified and directed. |
| 51 | M&L in repair to Granite (of any type/colour) work (table rubbed and polished) 10 to 20mm thick in steps, jambs, pillars, window cills, cooking platform and like in CM (1:4) including pointing in white cement (1)2( using marble dust with admixture of pigment to match with shade of granite over 15mm thick screed bed in CM 1:6 incl moulding, chamgering of edges complete all as specified and directed. |
| 52 | M&L for 75mm thick cement concrete 1:3:6 type C2, using 40mm graded stone aggregate as in sub base, finishing cement concrete surfaces even and smooth without using extra cement, Joints of plinth protection shall be filled with bitumen mastic (1:3)complete all as specified and as directed. |
| 53 | M&L for 75mm thick cement concrete 1:3:6 type C1, using 40mm graded stone aggregate as in plinth protection, finishing cement concrete surfaces even and smooth without using extra cement, Joints of plinth protection shall be filled with bitumen mastic (1:3)complete all as specified and as directed. |
| 54 | M&L for 75mm Thick Cement Concrete Type D-2, 1:4:8 (40mm Graded Aggregate) complete all as specified and directed. |
| 55 | M&L for 25mm Thick Cement Concrete Type B-1, 1:2:4 (20mm Graded Aggregate) complete all as specified and directed. |
| 56 | M&L for glazed ceramic coloured tiles joint free, any coloured / shedof size 450mm x 300mm x 7mm on vertical surface such as skirting, dados, risers to steps etc set &jointed in neat cementslurry and pointed inwhite or coloured cementto match the colour oftiles, laidover and includingrendering10mm thick in cement mortar (1:4), complete all as specified and directed. |
| 57 | M&L, Non-skid coloured ceramic tiles 7 to 8 mm thick joint free tiles, (square/rectangular), area of each tiles exceeding 0.11 sqm but not exceeding 0.18sqm, in floors etc. set & jointed in net cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed in CM 1:6 complete as specified and directed. |
| 58 | M&L, Non-skid coloured ceramic tiles 7 to 8 mm thick (square/rectangular), area of each tiles exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set & jointed in net cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed in CM 1:4 complete as specified and directed. |
| 59 | M&L, Non-skid coloured ceramic tiles 7 to 8 mm thick (square/rectangular), area of each tiles exceeding 0.18 sqm but not exceeding 0.38 sqm, in skirting etc. set & jointed in net cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed in CM 1:4 complete as specified and directed. |
| 60 | M&L for rubber moulded exterior grade joint less coloured tiles, 10mm thick, area exc 0.06 sqm but n.exc 0.38 sqm with grey cement and pigments set & jointed and pointed in neat cement slurry over and including 15mm thick cement screed bed in cm 1:6 with grey cement and pigments in floors including taking down old tile complete all as specified and directed. |
| 61 | M&L for dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as sepcified and directed. |
| 62 | M&L for rendering cement plaster 10mm thick in cement mortar 1:4 on fair faces of concrete in ceilings, chajjas, fins facia etc. complete all as specified and directed. |
| 63 | M&Lfor15mmthickcement plaster on fair faces of birck work or concrete surfaces on wall in CM1:6 finished the plaster surface fair and even complete all as specified and directed. |
| 64 | M&Lfor15mmthickcement plaster on fair faces of birck work or concrete surfaces on external surface of wall in CM1:4 finish the plaster surfacefair and even complete all as specified and directed. |
| 65 | M&L 15 mm thick renderingin in two layers10mm thick cement plaster in CM 1:6 and 5mm thick in CM 1:4 on fair face of brick work/Stone or concrete surface to be finished even and smooth without using extra cement complete all as specified and directed. |
| 66 | Taking down cement plaster on brick or stone wall etc. including raking out joints, hacking for key, scrubbing down with water etc. complete all as specified and directed. |
| 67 | M&L for preparation of plastered or unplastered old decorated surfaces of walls by complete removal of existing treatment, moulds, moss and efflorescent salt and treating oil and greasy spot and applying three coat of white wash on walls including cornices etc. complete all as specified and directed. |
| 68 | M&L preperation of new surfaces of walls and applying two coats of oil bound distemper over a coat alkali-resistant primer etc completed all as directed and specified. |
| 69 | M&L for preparingof new plastered or un-plastered surfaces and applylng two coats of oil bound distemperovera coat of primerover and including wall care pulty completeall as specified and directed |
| 70 | M&L for preparing new plastered or un-plasteredceilingsurfaces and applying three coats of white wash complete all as specified and directed. |
| 71 | M&L for preparing old plastered or un-plastered surfaces and applying two coat of white wash on ceilings complete all as specified and directed. |
| 72 | M&L for two coats of exterior emulsion paint (weather coat ,anti dust of Berger or equivelent ) over a coat of primer over a thin layer of external wall putty to achive a smooth finish surface overnewly plastered surface of wall complete all as specified and as directed. |
| 73 | M&L for two coats of exterior emulsion paint (weather coat ,anti dust of Berger or equivelent ) over a coat of primer over a thin layer of external wall putty to achive a smooth finish surface after complete removal of existing treatment complete all as specified and as directed. |
| 74 | M&L for preparation of new plasteredsurfacesand applying two coat of oil bound distemper over and including a layer of wall care putty (average thickness 2 mm) complete all as specified and directed. |
| 75 | M&L for preparation of old plastered surfaces by complete removal of existing treatment and applying two coat of oil bound distemper over and including a layer of wall care putty (average thickness 2 mm) complete all as specified and directed. |
| 76 | S&F, 4.8 mm thickplain sheet glass, ordinary quality and glazing not exceeding 0.8 Sqm in each pane fixed with glass putty complet all as specified and directed. |
| 77 | 5.50 mm thick Sheet glass, ordinary quality and glazing with oil putty in square exc 0.5 sq. m in each pane complete all as specified and directed. |
| 78 | M&L for preparation of old wooden surface of any description, over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed. |
| 79 | M&L for preparation of new steel surface of any description exc. 10cm width or girth and applying two coats of synthetic enamel paint over a coat of primer complete all as specified and directed. |
| 80 | M&L, preparation old previously treatedsteel Surfaces of any description, over 10cm in width or girth, not otherwise described and applying one coat of synthetic enamel paint on thesteel surfaces, complete all as specified and directed. |
| 81 | S&F, GI tubing, 25mm bore, medium grade, ISI marked with all necessary fittings, laid in trenches/floors complete all as specified and directed. |
| 82 | Taking up or down steel tubing and connections for 15mm bore of pipe complete all as specified and directed. |
| 83 | Taking up or down steel tubing and connections for 20mm bore of pipe complete all as specified and directed. |
| 84 | S&F steel water tubes, medium grade, galvanized, with all fittings and fixed to walls and ceilings or laid in floorsfor 15mm bore of pipe complete all as specified and directed. |
| 85 | S&F steel water tubes, medium grade, galvanized, with all fittings and fixed to walls and ceilings or laid in floorsfor 20mm bore of pipe complete all as specified and directed. |
| 86 | S&F steel water tubes, medium grade, galvanized, with all fittings and fixed to walls and ceilings or laid in floorsfor 25mm bore of pipe complete all as specified and directed. |
| 87 | Refixing old serviceable steel tubing and connections in new or old position (walls, ceilings, floors etc.) for 15mm bore of pipe complete all as specified and directed. |
| 88 | Refixing old serviceable steel tubing and connections in new or old position (walls, ceilings, floors etc.) for 20mm bore of pipe complete all as specified and directed. |
| 89 | M&L for RCC NP3 150mm dia pipes laid on 150mm thick PCC Cradle PCC 1:4:8 bed with excavation in depth 0.70m - 1.65m in any type of soil, including manholes/drop manhole of standard size made of Brick masonry/RCC/Precast RCC with DFRC ventilating cover and frame includes all items and activities to execute and make sewer line functional. |
| 90 | S&F rotational moulded polyethylene water storage tanks of capacity 1000 Litres (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR-Part-Icomplete all as specified and directed. |
| 91 | S&F rotational moulded polyethylene water storage tanks of capacity 1000 Litres (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR-Part-Icomplete all as specified and directed. |
| 92 | S&F 15mm diaBrass CP bib cock cast copper alloy fancy type with long shank capstain head serewed down high pressure pipe in repairs complete all as specified and directed. |
| 93 | S&F, in repair, pillar taps fancy type cast copper alloy with capstan heads, chromium plated, screwed down high pressure with or without lettered hot or cold with long screwed shanks and fly nuts screwed for iron pipe and fixed 15 mm bore dia complete all as specified and directed. |
| 94 | S&F inchromium plated Stop Valves (Angle type) fancy type 15 mm bore Stop valves, cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions complete all as directed. |
| 95 | S&F, in repair, 15mm, stop valve/angle valve, cast copper alloy, chromium plated, fency type with crutchor butterfly handle screw down, serewed for iron pipe or brass ferrule complete all as specified and directed. |
| 96 | S&F, in repair, 15mm dia stop valvescast copper alloyfancy type chromium plated with long shank and cup (conceled type)screwed down, high pressure with capstain head , screwed both ends, fixed complete all as specified and directed. |
| 97 | S&F, Gun metal globe or gate valve,with iron wheel head, screwed both ends for iron pipe for 25 mm bore of pipe complete all as specified and directed. |
| 98 | S&F, in repair, Gun metal globe or gate valve,with iron wheel head, screwed both ends for iron pipe for 25 mm bore of pipe complete all as specified and directed. |
| 99 | S&F 25 mm bore brass ball valves, high pressure,with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed in repairs complete all as specified and directed. |
| 100 | S&F, 20mm bore, ball valves high pressure of PTMT with epoxy coated aluminium rod & high-density plastic ball screwed for iron pipe and fixed complete all as specified and directed.(Minimum weight -210 Gms)complete, all as specified and directed. |
| 101 | S&F, Towel Rail 600mm long of PTMT fixed with and including chromium plated brass screws and wooden/plastic cleats (Minium weight 190 gms) complete all as specified and directed. |
| 102 | S&F PVC connection 15 mm size with PTMT nuts of length 600 mm complete all as specified and directed. |
| 103 | S&F, 75mm bore PVC (SWR) pipes, single socketed in any length with rubber ring joints fixed to walls including stack "Z" clamp complete all as specified and directed. |
| 104 | S&F, 110mm bore PVC (SWR) pipes, single socketed in any length with rubber ring joints fixed to walls including "Z" clamp complete all as specified and directed. |
| 105 | S&F, 110mm bore PVC (SWR) bend, any radius complete all as specified and directed. |
| 106 | S&F, 75mm PVC (SWR) vent cowl complete all as specified and directed. |
| 107 | S&F in repairs, 125/110mm bore PVC (SWR) "P" trap complete all as specified and directed. |
| 108 | S&F PVC (SWR) nahani trap, with chromium plated grating including jointing with solvent cement, dia of outlet 75mm complete all as specified and directed. |
| 109 | S&F, in repair, vitreous china wash down water closet pan (pedestal pattern), white (excluding flushing cistern) including connection to drain (or outgoing pipe) and to flushing pipe, antisyphonage pipe, etc. including seat cover in same colour etc. complete all as specified and directed. |
| 110 | S&F in repair vitreous China squatting pan "Orissa pattern" size 580x440 mm, white with integral foot rest including "P" or "S" trap front or back inlet excluding flushing cistern and flush pipe including connection to trap and flushing pipe etc and making good to floor complete all as specified and directed. |
| 111 | S&F, in repairs, Two way bib taps cast copper alloy chromium plated fancy type with crutch or butterfly handle screw down screwed for iron pipe or brass ferrule for 15mm bore of pipe complete all as specified and directed. |
| 112 | S&F, in repair vitreous china counter top wash basin oval shape, size 550 x 400mm including PVC waste couplingfixed complete all as specified and directed. |
| 113 | S&F, chromium plated brass peg set of six fixed with brass screw and wooden/plastic cleats. |
| 114 | S&F, in repairs, vitreous china urinal, Half stall type, white (excluding flushing pipe) incl providing and fixing plug, bedding urinal against wall in CM (1:2), securing urinal to plugs with and incl 60mm long brass screws, pointing around urinal back in cement, fixing flush pipe, gratings and union for discharge pipe incl supply and fixing of 32mm bore 60mm long discharge pipe complete all as specified and directed. |
| 115 | S&F, in repair, 10 litres capacity, valveless, syphonic action type, flushing cistern,including 32mm dia PVC flush pipe complete all as specified and directed. |
| 116 | S&F, in repair Toilet paper holder with flat recessed type stainless steel complete all as specified and directed |
| 117 | S&F, 1800mm x 450mm beveled edge mirror of selected quality glass, mounted on 6mm thick AC building boardand fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified and directed. |
| 118 | S&F, in repair, 600mm x 450mm beveled edge mirror of selected quality glass, mounted on 4mm thick AC building boardand fixed to wooden plugs with chromium plated brass screws and cup washers with PVC frme complete all as specified and directed. |
| 119 | S&F, Soap dish, approximate size 160 x 160 x 90mm, fixed with screws complete all as specified and directed. |
| 120 | S&F,Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in allas specified and directed. |
| 121 | Demolition of brick work or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars etc. complete all as specified and directed. |
| 122 | Demolition of cement concrete (un-reinforced) in ground floors and pavings not exc. 15cm thickness (below or above ground level) all as specified and directed. |
| 123 | M&L for demolition of concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed. |
| 124 | Demolition of reinforced cement concrete in any positionnot exc 15 cm thickness (below or above ground level) complete all as specified and directed. |
| 125 | Dismantling structural steel work including door , gatesbut excluding framed truss etc complete all as specified and directed. |
| 126 | Dismantling of Asbestos cement (corrugated, semi corrugated, etc) sheet in roof covering |
| 127 | Dismantling wall and ceiling boards, partitions of any description or in any position (fibre, pulp, insulation etc.) any thickness, or insulation boards/ slabs/ blankets of any thicknessincluding cover fillets complete all as specified and directed. |
| 128 | Taking down carefully copper/aluminum point wiring (light, fan,socket or power) complete,including fixture and fitting such asas switches, ceiling roses, pendants, regulators, sockets,etc excluing light fittings etc,removing materials to store for keeping in safe custudy or for taking credit ( credit for above items should be made as per conditions separately) and making good disturbed surface of walls, ceiling, floor etc to match with the existing surface complete all as specified and directed. |
| 129 | M&L for point wiring for one light/fan/bell point controlled by one switch one way in & including PVC conduit concealed in brick or stone wall using FRLS PVC unsheathed multistrand copper conductor wire 1.5 sqmm single core for one light/fan point controlled by one switch including modular white cover plate with frame of suitable modules over modular metal flush box concealed type for earth continuity insulated PVC unsheathed (green colour) 1.5 sqmm copper earth wire connected to common earth dolly using complete all as specified and directed by Engr-in-charge. Note : (a) wiring shall be done by using proper colour coding. |
| 130 | M&L for point wiring for one 3pin, 5 Amps socket outlet in independent board in & including PVC conduit concealed in brick or stone wall using FRLS PVC unsheathed multistrand copper conductor wire 1.5 sqmm single core for one light/fan point controlled by one switch including modular white cover plate with frame of suitable modules over modular metal flush box concealed type for earth continuity insulated PVC unsheathed (green colour) 1.5 sqmm copper earth wire connected to common earth dolly using complete all as specified and directed by Engr-in-charge for 6 Ampsocket outlet on same board complete all as specified. |
| 131 | M&L for point wiring for one light/fan/bell point controlled by one 3 pin, 5 Amps socket outlet on the same board controlled by another switch in & including PVC conduit concealed in brick or stone wall using FRLS PVC unsheathed multistrand copper conductor wire 1.5 sqmm single core for one light/fan point controlled by one switch including modular white cover plate with frame of suitable modules over modular metal flush box concealed type for earth continuity insulated PVC unsheathed (green colour) 1.5 sqmm copper earth wire connected to common earth dolly using complete all as specified and directed by Engr-in-charge for 6 Ampsocket outlet on independent board complete all as specified. |
| 132 | M&L for point wiring for one light/fan/bell point controlled by one switch one way in & including PVC conduit concealed in brick or stone wall using FRLS PVC unsheathed multistrand copper conductor wire 2.5 sqmm single core for one light/fan point controlled by one switch including modular white cover plate with frame of suitable modules over modular metal flush box concealed type for earth continuity insulated PVC unsheathed (green colour) 2.5 sqmm copper earth wire connected to common earth dolly using complete all as specified and directed by Engr-in-charge for for 6/16 Ampindependent socket. |
| 133 | M&L for poing wiring with and including multistranded copper conductor 2.5 Sqmm (nominal cross sectional area) single core, PVC insulated, unsheathed FRLS cable 1100 Volts grade, ISI marked with valied CML number drawn in and including medium grade PVC casing and capping double lock type 25mm in size, ISI marked including with its fittings and fixtures such as tees, bends, elbows, junction boxes, etc. including multistranded copper conductor 2.5 Sqmm (nominal cross sectional area) single core, PVC insulated, unsheathed FRLS cable 1100 Volts grade, ISI marked with valied CML number as continuity earth wire and includingpressed steel sunken concealed terminal boxwith 3mm thick industrial laminated sheet cover for mounting switches, sockets and fan regulators etc. for one 3 pin, 15 Amps socket outlet point on independent board complete all as specified and directed. |
| 134 | M&L for poing wiring with and including multistranded copper conductor 4 Sqmm (nominal cross sectional area) single core, PVC insulated, unsheathed FRLS cable 1100 Volts grade, ISI marked with valied CML number drawn in and including medium grade PVC casing and capping double lock type 25mm in size, ISI marked including with its fittings and fixtures such as tees, bends, elbows, junction boxes, etc. including multistranded copper conductor 4Sqmm (nominal cross sectional area) single core, PVC insulated, unsheathed FRLS cable 1100 Volts grade, ISI marked with valied CML number as continuity earth wire and includingpressed steel sunken concealed terminal boxwith 3mm thick industrial laminated sheet cover for mounting switches, sockets and fan regulators etc. for AC/Geyser point on independent board complete all as specified and directed. |
| 135 | S&F,in repair, lamp holder,insulated body with back plate for batten fittings complete all as specified and directed. |
| 136 | S&F modular switch piano, flush type 6 Ampsone way 230 volts complete all as specified. |
| 137 | S&F modular switchone way 16 Ampsflush type 230 volts complete all as specified. |
| 138 | S&F modular socket outlet2-3 pin 6 & 16 Ampsflush type 230 volts complete all as specified. |
| 139 | S&F, modular fan step type regulator, suitable for 1200mm/1400mm sweep ceiling fan, 2 module complete all as specified and directed. |
| 140 | S&F Socket outlet3 pin 6 Ampsflush type 230 volts complete all as specified. |
| 141 | S&F Ceiling rose 3 terminal size 50x65mm surface type 230 volts complete all as specified. |
| 142 | S&F LED Adore Lamp 9W, B22 base 6500K CDL typecomplete all as directed by Engr-In-charge. Make: Havells/Crompton/Bajaj |
| 143 | S&F 30W New generation energy saving and environmental friendly long life LED street light made up of pressure die cast aluminium housing with high efficient LED as lighting source and PC cover having TOP Opening seperate driver compartment with IP66 protection and impact resistance of IK07 for bldg security light with GI pipe bracket of suitable size for fitting completeall as specified and directed by Engineer-in-charge. Make : Havells/Bajaj/Philips/Crompton |
| 144 | S & F LED 24 wattrecess mounting 2 x 2 luminaire of 24 watt, white powder coated CRCA housing with highpower LEDs. Aluminium front frame with flat white high transmission acrylic cover prewired and all accessoriesMake:Bajaj 24 watt or equivalent in Havells/philiphs |
| 145 | S&F security light luminaries 35 watt with wall mounting bracket of suitable size and clamps, nut bolts etc.having pressure die cast housing with epoxy power coated dark graphite grey colour finish,prismatic polycarbonate cover with individual LED lenses-IP65 prewired Conforming to Crompton of equivalent make of wipro/Havells/Bajaj/ wipro. |
| 146 | S&F, LED compact fitting/batten for single LED tube of 1x20W, 220 V AC decorative box type 4 ft with integral LED driver including 20W, T8 tube rod connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed. |
| 147 | S&F, LED flat panel of size 2" x 2" luminaire of 34 watt, environmental friendly, new generation, aesthetically designed, ultra modern recess mounting luminaire with high brightness SMD LEDs as light source, suitable for Armstrong/Grid Ceiling complete all as specified and directed. |
| 148 | S&F, sheet metal enclosures, single pole & neutral with a two pin & earth plug and socket complete with one single pole, MCB of 20 Amps, 10 KA, 240 voltscomplete all as specified and directed. Make ;Legrand / Havells/ standard. |
| 149 | S&F,DB with metal plug and socket double pole with MCB SP 20 Amps 230V, 10 KA complete all as specified and directed. |
| 150 | S&F Sheet metal enclosure double door for DB"s SPN 8 way 240 V having200 A rated bus bar complete all as specified and directed by Engr-Incharge. |
| 151 | S&F, in repair, Distribution Board SPN 4 way, 240 volts, factory made powder coated, double door with neutral and earth link, suitable for fixing MCB,s complete including connecting all as specified and directed. |
| 152 | S&F, ceiling fans 1200mm sweep energy efficient five star rated 230 volts with brushless direct current motor (BLDC) with blades, down rods, electronic regulator control type and accessoried and connecting up with 3 runs of suitable size single phase PVC insulated unsheathed, FRLS cable with multistanded copper conductors from ceiling rose to fan complete all as specified and directed. |
| 153 | Supply and fix of exhaust fan, 230 mm sweep, 1400 rpm, MS body heavy duty, AC single phase, 230 volts with, blades, and frame and louvers including connection with 0.5 sqmm multistranded copper conductor flexible wire from ceiling rose, necessary fixing arrangement i.e anchor nut, bolt, washer, grouting and making good to disturbed surface complete all as specified and as directed.Make : Crompton/Havells/Khaitan/Almonard/Bajaj |
| 154 | Labour only for cutting opening through brick walls for fixing of exhaust fan, including providing fixing and removing shoring cleaning and stacking bricks, removing surplus serviceable bricks, hard core etc. rubbish not exc 50m. forming jambs etc. to opening for 250/380mm exhaust fan including cutting tin wall for cement mortar 1:6 toothing and properly bonding into old work, also facing, jointing and pointing to match the existing work complete all as specified and directed |
| 155 | Supply and fix of exhaust fan, 250 mm sweep, PVC body, AC single phase, 230 volts with, alongwith louvers and blades including connection with 0.5 sqmm multistranded copper conductor flexible wire from ceiling rose, necessary fixing arrangement i.e anchor nut, bolt, washer, grouting and making good to disturbed surface complete all as specified and as directed.Make : Crompton/Havells/Khaitan/Almonard/Bajaj |
| 156 | S&F, wall mounting fan, oscillating type, single phase with speed regulator step type 400mm sweep, complete all as specified and direted as per make Havells, Model : D"zire or quigalent make of Crompton/Bajaj/Orient etc. |
| 157 | S&F MCB SPN 40A, 240 V -10 KA all as specified and as directed by Engineer-in-charge. |
| 158 | Taking down carefully old unserviceable main switches/ Distribution board any type including fuses MCB etc after removing all connection and making good the disturb surface allas directed by Engineer-in-charge. |
| 159 | Taking down carefully old UNSV submain wiring of any type/any size removing material to store for keeping in safe custody or for taking creditsand making good the disturbed surfaces of walls, floors, etc complete all as specified and directed. |
| 160 | S&F, in repair, Distribution Board Power line VTPN , 4 way, 415 volts, factory made powder coated, double door with neutral and earth link, including with 4 pole MCCB 63 Amps rating ,16KA breaking capacity for incoming supply and provn of MCB SP/TP for out going supply complete all as specified and directed. |
| 161 | Supply, installing, testing and commissioning factory made and tested (including CPRI type test certified) LT bus bar panel box of size 0.6x0.6x0.4mtr, outdoor type, mounted on 40x40x6mm thick MS angle iron frame 0.3mtr buried in the ground and 0.5mtr above the GL, suitble for 415 volts, 3 phase, 4 wire, 50 hz AC supply system having bus bar chamber with insulated aluminium bus bar of rating 200 Amps rating installed on porcelain insulator in steped type manner.The panelshall be dust and vermin proof.IP-65 class protection and made of 3.15mm CRCA MS Sheet and powder coated finish over one coat of red oxide primer on outside surface and painted inside with two coats of red oxide primer, front & back side opening type, with apron for cable entry with double door setter and locking arrangement complete all as specified and directed. |
| 162 | M&L for pipe chemical earthing with GI Pipe electrode 2.25m long having outer pipe nominal dia 80mm & inner pipe noinal dia 50mm duly filled with highly conductive and anti corrosive compound of requried quantity having chemical composition Betonite 40%, Copper sulphate 20%, Gypsum 5%, Graphite 10%, Alum 5% Zine sulphate 10%, Aluminium sulphate 10% burried in ground by digging a bore of 150mm dia surrounded by soil freindly backfill compound non soluble in water including connection with and including GI strip 32 x 6mm upto 7.5m PCC pit with RCC cover etc. complete and testing on completion complete all as specified and directed.Note : Rate quoted by tenderers shall be deemed to include for following provisions:-[i] Excavation & earth work in any type of soil including removing of surplus material upto 50m[ii] PCC 1:3:6 type C1 using 20mm graded stone aggregate in pit & 40mm thick precast RCC 1:2:4 type B1 cover 50 x 50 cm with 8mm TMT bars " 10cm C/C both ways with handles. [iii] GI protection pipe of size 40mm bore light grade 7.5m and testing on completion complete all as specified and directed. |
| 163 | Supply, laying in trenches or passing through pipes and testing cable XLPE insulated screened PVC bedded, galvanized steel strip or wire armored, electric power cables (Heavy duty) 1100 Volts grade with stranded aluminium conductor of size 4 Sqmm 2 Core complete all as specified and directed. |
| 164 | M&L for sub main wiring complete with FRLS PVC insulated unsheathed stranded copper conductor wire 4.0 Sq mm 02 runs (for Phase & Neutal)alongwith earth wire FRLS PVC insulated unsheathed stranded copper conductor wire of size 4.0 sq mm wire drawn through in & including PVC concealed conduit as per site requirement complete all as directed by Engr-In-charge. |
| 165 | M&L for Sub main wiring complete with FRLS PVC insulated unsheathed stranded copper conductor wire 2.5 Sq mm 02 runs (for Phase & Neutal)alongwith earth wire FRLS PVC insulated unsheathed stranded copper conductor wire of size 2.5 sq mm wire drawn through in & including PVC casing capingcomplete all as directed by Engr-In-charge. Note: (i). 2 run of main conductor and one run of earth conductor shall be measured as one length. |
| 166 | S&F MCB SPN 32A, 240 V -10 KA all as specified and as directed by Engineer-in-charge. |
| 167 | S&F MCB SP 6-32A, 240 V -10 KA all as specified and as directed by Engineer-in-charge. |
| 168 | M&L for earthing complete with galvanized steel earth plate electrode of 60 cm x 60 cm x 6mm thick buried directly in ground [earth pit not less than 2.25 metre deep below normal ground level] with top edge of the plate not less than 1.5 m below normal ground level, connected to galvanized earth Lead 4 mm by means of bolts, nuts, check nuts and washers of galvanized iron or steel all as shown in electrical plate No. 3 of MES SSR Part I connected to earth test point using earth strip of 25x4mm as earth lead all as specified and testing on completion includingprovisionof earth lead protected by 20 mm dia light grade GI pipe & watering pipe shall be 15 mm bore medium grade GI pipe including all excavation and earth work in any type of soil, PCC pit with RCC cover, char coal, salt, funnel etc complete. Note : Rate quoted by tenderers shall be deemed to include for following provisions:-[i]. Excavation & earth work in any type of soil including removing of surplus material upto 50 M.[ii]. PCC 1:3:6 type C1 using 20mm graded stone aggregate in pit & 40mm thick precast RCC 1:2:4 type B1 cover 50x50 cm with 8mm TMT bars @ 10 cm C/C both ways with handles.[iii]. Main earthing lead from earth electrode to test point upto 7.5 mtr.[iv]. Funnel with watering pipe [GI pipe] 15 mm bore [ISI marked] medium grade & copper lugs, charcoal & salt as reqd.[v]. GI protection pipe of size 20 mm bore light grade 7.5m. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
