Military Engineer Services-MES has published Tender For Special Repair Of Otm Accommodation Building No T-271 And T-257 Of Lt Regt And Other Sanctioned Works At Nams. Submission Date for this Tender is 23-05-2024. Building Work Tenders in Amritsar Punjab. Bidders can get complete Tender details and download the document.
| Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
| 1 | 07-May-2024 | Revised BOQ | BOQ | 23-05-2024 |
| 2 | 14-May-2024 | Tender corrigendum | Other | 23-05-2024 |
| FileName | File Description | File Size |
| 273b777e-3687-45c6-8cec-711929761645.html | Tender Notice | 0 KB |
| 01T.pdf | Tender Document | 0 KB |
| BOQ_729809.xls | Tender Document | 0 KB |
| Tendernotice_1.pdf | Tender Document | 0 KB |
| Sl. No. | Item Description |
| 1 | M&L for Excavating in post holes( or similar holes) in soft/loose soil each n exc 0.5 cu.m. getting out, returning,filling in and ramming earth of broken rubble mixed with earth around , in layers not exceeding 25 cm, watring, and removing surplus soil to a distance n.exc 50 m and making good surface |
| 2 | Surface excavation n exc 30 cm deep and averaging 15cm deep and getting out in soft/loose soil complete all as specified |
| 3 | Excavating in trenches, n exc 1.5m wide and n exc 1.5 m depth; for foundation, etc. or for shafts, wells, cesspits, manholes,pier holes, etc. for lying of cable n exc 10 sq m on plan and n exc 1.5m in depth and getting out in soft loose soil. |
| 4 | Excavating in trenches, n exc 1.5m wide and exc 1.5 m depth but n exc 3.0m depth; for foundation, etc. or for shafts, wells, cesspits, manholes,pier holes, etc. n exc 10 sq m on planand getting out in soft loose soil. |
| 5 | Excavating in trenches, n exc 1.5m wide and exc 3 m depth but n exc4.50m depth; for foundation, etc. or for shafts, wells, cesspits, manholes,pier holes, etc. n exc 10 sq m on planand getting out in soft loose soil. |
| 6 | Excavating in trenches, n exc 1.5m wide and exc 4.5 m depth but n exc 6.0m depth; for foundation, etc. or for shafts, wells, cesspits, manholes,pier holes, etc. n exc 10 sq m on planand getting out in soft loose soil. |
| 7 | Excavation over areasn.exc 1.5m in depth for foundation, etc or for shafts, wells exc 10 sqm on plan and getting out soft/loose soil complete all as specified and directed. |
| 8 | Excavation over areas exc 1.5mand n exc 3.0 m depth for foundation,soft/loose soil complete all as specified and directed. |
| 9 | Excavation over areas exc 3.0mand n exc 4.50 m depth for foundation,soft/loose soil complete all as specified and directed. |
| 10 | M&L Hardcore ofbrokan stones, gauge n exc. 63 mm, deposited , spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface |
| 11 | M&L Hardcore ofbrokan bricks, gauge n exc. 63 mm, deposited , spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface |
| 12 | M&L Cement concrete type D-2, 1:4:8 using 40mm graded agregate asin foundations, filling and mass concrete complete asll as specified and directed. |
| 13 | M&L for Cement concrete in foundations, filling and mass concrete in filling for post holes etc Type B2 1:2:4 ( 40 mm graded aggregate) complete asll as specified and directed. |
| 14 | M&L brick work with sub class "B" bricks straight curved on plan exc 6 mean radius built in CM 1:6 complete asll as specified and directed. |
| 15 | M&L, Brickwork including honeycomb brick work if any with old size subclass ‘B’bricks, straight or curved on plan n exc 6m mean radius brick fair cut and rubbedbuilt in Cement mortar 1:4 complete all as specified and directed. |
| 16 | M&L for brickwork with subclass "B" bricks (old size bricks), straight or curved on plan exc 6m mean radius, built in CM 1:6 complete incl demolition of brickwork /stone built in cement mortar etc complete all as specified and directed. |
| 17 | Description all as per srl itemNo 16.00 above here in before but except bricks complete all as specified and directed. |
| 18 | M&L for brick work with sub class "B" bricks, straight or curved on plan to any radius in half brick thick wall built in cement morter 1:4 , all as specified and directed. |
| 19 | M&L Damp proof course in Cement conrete 1:2:4type B-0 40mm thick to horizontal or vertical surfaces including necessary formwork |
| 20 | Returning, filling in, including spreading, levelling , watering and well ramming in layers not exc 25 cm.in soft/loose soil |
| 21 | Removing excavated soiln exc 50m and depositing where directed |
| 22 | M&L for rendering 15 mm thick on fair faces of brick work or concrete surfaces on walls in CM 1:3 mixed with wpc. finishing even and fair without using extracement complete all as specified and directed |
| 23 | Supply only liquid water proofing compound |
| 24 | M & L for RCC nominal mix type A-1 (1:1 1/2 : 3) (20 mm graded stones agrregate ) as in beams, cantilevers, bressummers, lintels over 1.5m span. |
| 25 | M&L for RCC nominal mix type A-1 (1 : 1 1/2 : 3 using 20mm graded stone aggregate as inbaffle wall complete all as specified and directed. |
| 26 | M & L for RCC nominal mixtype A-1 (1:1 1/2 : 3) (20 mm graded stones agrregate ) in slab as in supported on walls , beams and columns in floors , roofs landing balconis etcas specified and directed |
| 27 | M & L for RCC nominal mixtype A-1 (1:1 1/2 : 3) (20 mm graded stones agrregate ) in chajjasas specified and directed |
| 28 | M&L for precast RCC 1:1.2:4 type B-1 using 20mm graded stone aggregate as cover slab for manhole and similar work etc complete all as specified and directed. |
| 29 | Use and waste of form work to rough finished flat surfaces ofsides and soffits of floor or roof beams, beam haunchings, girders, bressumers, lintels, cantilevers, shelves, including supports, overhangs etc also splays between floors and beams etc complete all as specified. |
| 30 | Use and waste of formwork to sides and soffits of rough finished surfaces of faces of walls retaining walls, abutments parapets and staircese railings and similar work including attached pillasters buttresses etc vertical complete all as specified and directed. |
| 31 | Use and waste ofform work torough finished flat surfaces of soffits of suspended slab such as roof slab Floor slab, shelves and chajjas etc not cxc 200mmthick (Horizontal or sloping) complete. |
| 32 | Use and waste of form work rough finished surfaces of concrete to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, opening in concrete walls, floor and roofs n exc 20 cm wide and sides of RCC/PCC bands in walls , horizontal or sloping and similar work exc 10 cm but n exc 20 cm wide |
| 33 | S&F Mild steel TMT bars 10mm dia and over cut to length, bent to shape required, including cranking bending spirally for hooping for columns , hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or scouring with clips. |
| 34 | S&F Mild steel TMT bars 5mm dia and over upto and including 10mm dia in stirrups, spacers, and binderscut to length, bent to shape required, including cranking bending spirally for hooping for columns , hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or scouring with clips. |
| 35 | S & F cast iron work grade FG 150 unmachined , in brackets , gully traps, steps, gratings, railings, frames, manhole covers, fire and soot doors, dampers. Stopvalve boxes, gate stops, parts of ranges, balusters and similar workcomplete all as specified and directed. |
| 36 | Material and labour for filling in loose broken stone aggregate of size 40 to 60mm as in soakage well complete all as specified |
| 37 | Taking down cement plaster of any description on concrete surfaces such as soffit of RCC slab, chajjas and brick walls etc including raking out joints, hacking for key, scrubbing down with water etc. |
| 38 | M&L for rendering 15 mm thick on fair faces of brick work or concrete surfaces on walls in CM 1:4. finishing even and fair without using extracement complete all as specified and directed |
| 39 | M&L for rendering 15 mm thick on fair faces of reinforced concrete surfaces on walls in CM 1:6. finishing even and smooth without using extra cement complete all as specified and directed |
| 40 | M&L for rendering 10 mm thick on fair faces of brick work or concrete surfaces on ceiling in CM 1:3. finishing even and smooth without using extracement complete all as specified and directed |
| 41 | M&L for prepration of newly plastered/un plastered surfaces of wall and applying two coats of cement base paint of shade as approved over a coat of cement primer complete all as specified and directed. |
| 42 | M&L for preparation of new surface andapplying two coats of oil bound distemper on wallscomplete all as specified and directed |
| 43 | M&L for Prepration of newly plastered surface and applying three coat of white wash as on ceiling. |
| 44 | M and L for sand filling under floors or in foundation including watering and consolidation |
| 45 | M&L 75mm thick Cement concrete type D-2 , 1:4:8 using 40 mm graded aggregate as in floor complete all as specified |
| 46 | M&L 75mm thick Cement concrete type D-2 , 1:4:8 using 40 mm graded aggregate as in floor incl demolition complete all as specified |
| 47 | M&L 75mm thick Cement concrete type C-2 , 1:3:6 using 40 mm graded aggregate as in plinth protection / path complete all as specified |
| 48 | M & L for 75 mm thickPCC 1:3:6 type C-2 (using 40mm agg.) in plinth protection, path and pavingincl demolition and rubbish off the primisescomplete as specified and directed. |
| 49 | S&F non skid ceramiccoloured tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm in floors etc set and jointed in neat cement slurry and pointed in white or colour cement to match the colour of tiles over and including 15mm thick screed bed in CM 1:6 & complete all as specified and directed. |
| 50 | M&L Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust , etc and Brushing neat cement slurry with 3.0 Kg of cement per sq. Metre |
| 51 | S&F glazed ceramic coloured tilesthick, etc. on vertical surfaces such as skirting , dados and risers to steps etc. 350x250x7mm/450x350x7mm thick set and jointed in neat cement slurry and pointed in white cement mixed with pigment to match over and including 10mm thick rendering plaster in CM 1:4 on brick surface complete all as specified and directed. |
| 52 | M&L for heavy duty, exterior grade (Durastone of Somany/Enduraof jhonson or equivalent as approved by GE) of any size 10mm thick, as in floor (in trades, landing etc ),set, jointed and pointed in neat cement slurrywith white cement and pigment laid over and including screed bed or bedding layer of 15 mm thick in cement mortar(1:6) complete all as specified and directed. |
| 53 | Taking down Chowkats or frames from the opening of sizeexceeding 1.5 but n exc 4 sqm sqm each with shutters ( without taking off shutters from the frames) complete all as specified and directed |
| 54 | Taking down Chowkats or frames from the opening of size not exceeding 1.5 sqm each with shutters ( without taking off shutters from the frames) complete all as specified and directed |
| 55 | S&F MS framed work as in door or gates of angle or other section with gusset plates,rail, braces,etc and similar work incl primer conform-ing to Fe 290Gde E-165 complete all as specified and directed. |
| 56 | M & L Providing cement concrete type B0 1:2:4 (12.5 mm graded aggregate) in bed block for hold fast for doors/mud stops or roof kerbs all as specified and directed . |
| 57 | S & F Factory made solid panelpvc door shutter 30 mm thick ( style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC "C" channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rails & bottom rail;but wire gauzed i.e.panel will be wire guage in lieu of PVC sheet panel,the wire guage shall be wrapped on an additional square 8 mm M.S.solid tube and this tube shall be welded to MS tubes .the wire guage shall be streched to tighten firmly |
| 58 | S&F 35mm thick Flush shutters , solid core construction , with block board core and plywood face panels, commercial type on both sides Complete all as specified and directed. ISI Marked. |
| 59 | S&F IInd class hard wood Glazed and skeleton shutters 35mm thick divided into square, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc., sizes of members of shutters as specified in SSR Part I, Section 8 clause 8.24 (a) ; supplied and fitted to chowkats complete all as specified and directed |
| 60 | S&F steel window 1.25mm thick box type (primer coated) ERW hollow P section of size 60mmx25mm double rebated comprises of glazed& gaugedskelton shutterof (required no of gauged shutters andglazed shutters with or without AC opening) ERW section 50mmx20mm & 1mm thick with one or two openable leaf consisting of two number sash bars of T-Section 20mmx3mm complete welded to frame with one vertical mullion of ERW box type T-Section of size 60mmx25mm and 1`.25mm thick including cutting holes and making good dismantled portion in PCC 1:2:4 type B-1 (four Nos for each window) including following fittings welded to the frame shutter :- Ref Drg No CE JZ/TD-06/07 i)Hold fast 150mm long mild steel flat iron 12x3mm made to shape- 04 Nos per window ii)Handle of Z section 20mmx25mm, 100mm long – 01 No per leaf. iii)MS tower bolt 150mm long 2 No per leaf. iv) Z section 20mmx25mm, 100mm long stopper – 01 Nos per leaf.v)Cleat 55mm long of hollow square 15mmx12mm- 02 Nos per leafvi)Fabrication and fixing arrangements as per Drg No CE JZ/TD-06-07(vii) MS Guard bars 12mm square bars @ 12cm c/c fixed horizontally Note sheet glass , wire mess and painting shall be measured and paid separately |
| 61 | S&F MS box type window/ventilator fixed type with glazing bar without wire work and glass as per Drg No CE JZ-70/06-07 dated 07.06.07with guard bar including priming coat complete all as specified and directed Note sheet glass , wire mess and painting shall be measured and paid separately |
| 62 | S&F Sheet glass, 3mm thick ordinary quality, in squares, not exceeding 0.50 sqm in each pane including wooden beading fixed nails complete all as specified and directed |
| 63 | S&F Sheet glass figured, 3mm thick ordinary quality, in squares, not exceeding 0.50 sqm in each pane including wooden beading fixed nails complete all as specified and directed |
| 64 | S&F GI wire cloth, 0.56 mm nominal dia. of wire and average width of aperture 1.18 mm and fixed with tinned tacks, or galvanised wire staples complete all as specified and directed |
| 65 | S&F100mm long butt Hinges, medium weight, cold rolled mild steel and fixed. |
| 66 | S&F150 mm Aluminium, anodised, barrel tower bolts of extruded section and fixed |
| 67 | S&F200 mm Aluminium, anodised, barrel tower bolts of extruded section and fixed |
| 68 | S&F 150 mm Extruded aluminium alloy handles, fabricated type, anodised |
| 69 | S&F in repair 250mm long Aluminium alloy. Anodised, sliding door bolt with hasp, staple ( bolt type) and fixing clips of sheet , cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed |
| 70 | S&F 300 mm long mild steelordinary rat tail rod pattern spring, including roller and roller plate. |
| 71 | S&F Floor door stopper of aluminium alloy body and tongue anodised with hard drawn steel spring fixed to door shutter of size 140mm. |
| 72 | M&L for preparation of untreated steel/iron surfaces of any description ,over 10 cm in width or girth,not otherwise described and applying two coats of sythetic enamel paint over and incl one coat of red oxide primer complete all as specified. |
| 73 | M&L two coats of synthetic enamel painting on wooden surfaces of any description over 10 cm in width or girth not otherwise described abovepink primer including prepration of surfaces. |
| 74 | M&L for applying evenly a tack coat of industrial bitumen 85/25 grade @ 1.2 Kg/Sqm including cleaning surfaces etc complete all as specified and directed |
| 75 | S&F (minimum) 3mm thick APP film based poly meric membrance minimum weighing 3Kg per Sqm reinforced with polyester non wove fabric (weight not less than 150 gms/sqm) land on primed surface by forced application over entire roof area with over lapping 100mm to either sides and sealed in after cleaning down the roof by brooms complete all as specified and directed. |
| 76 | M&L for preparation of untreated APP membrane of any description ,over 10 cm in width or girth,not otherwise described and applying two coats of aluminium paint including preparation of durfacescomplete all as specified. |
| 77 | Supply and fixingvitreous china squatting pan ( Orissa Pattern) size 580 x 440 mm (white), with PVC (SWR) P or S trap, integral foot rest including water connection to trap and flushing pipe, flushing cistern etc complete andbedding in PCC 1:7:12 type F-2 all as specified. Note :-Flush pipe and flushing cistern to be measured and paid separately. |
| 78 | S&F 10 Ltr capacity PVC valveless symphonic action type flushing cistern white low level with ball valve flote handle including bracket and flush pipe of polythylene of low or high density or PVC,32mm dia complete all as specified and directed |
| 79 | S&F vitreous China wash basin white,flat back size550x400mm including PTMT waste coupling 32mm bore,waste PVC pipe and cast copper alloyPillar Tap complete |
| 80 | Supply & Fixing vitreous china urinal half stall type with CP spreader white with grating and union for discharge pipe, including providing and fixing plug, bedding urinal against wall in cement mortar 1:2 securing urinal to plugs with and including 60 mm long brass screws, pointing around urinal back in cement fixing with brackets, flush pipe, grating and union for discharge pipe complete all as specified and directed |
| 81 | S&F PVC connection 15mm size with PTMT nuts of length 450mm complete all as specified and directed |
| 82 | S&F rotational moulded polythene, triple layers, water storage tank 500 Ltr capacity, closed top, cylindrical, hoisted and fixed in position including S&F 20mm bore PTMT ball valve epoxy coated minium weight 210gms with aluminium rod complete all as specified and directed |
| 83 | S&F 15mm dia GI tubes medium grade with all fitting and fixed complete to walls and ceiling or laid in floors all as specified and directed. |
| 84 | S&F 20mm dia GI tubes medium grade with all fitting and fixed complete to walls and ceiling or laid in floors all as specified and directed. |
| 85 | S&F 20mm dia GI tubes medium grade with all fitting and fixed completelaid in trenches all as specified and directed. |
| 86 | S/F in40mm bore stop cock/gate valve cast copper alloy CP screweddown high pressure with crutch or butterfly handle including cutting existing pipe complete. |
| 87 | S/F 15mm bore stop cock cast copper alloy CP screweddown high pressure with crutch or butterfly handle complete. |
| 88 | S/F in20mm bore stop cock cast copper alloy CP screweddown high pressure with crutch or butterfly handle complete. |
| 89 | S&Fof brass cromium brass plated fancy type bib taps 15 mm bore long nose screwed down screwed for iron pipe or for brass complete all as specified and directed |
| 90 | S&F100mm dia CP grating with or without hinge type or hole type complete all specified and directed. |
| 91 | S&F600mmx450mm bevelled edge mirror of selected quality glass,mounted on 6mm thick commercial plywood and fixed to wooden plug with chromiuum matched brass screws |
| 92 | Supply and fixshelf of PTMT fixed with and including chromium plated brass scrws and wooden/plastic cleatsminimum weight 300gms (500mm long and 125mm weight |
| 93 | S&F 110mm bore PVC(SWR) pipes single socketed in any lengthfixed to floors or in trench complete all as specified and directed by Engineer-in-charge |
| 94 | S&F110mm bore PVC (SWR) bends any radius With access door complete all as specified and directed |
| 95 | S&F 110 mm bore( SWR) vent cowl complete all as specified and directed |
| 96 | S&F 75mm bore PVC(SWR) pipes single socketed in any lengthfixed to floors or in trenches complete all as specified and directed by Engineer-in-charge |
| 97 | S&F75mm bore PVC (SWR) bends any radius With access door complete all as specified and directed |
| 98 | S & F PVC (SWR) gully trap 125/110mm setting and jointing with solvent cement complete all as specified and directed |
| 99 | M&L 75mm bore PVC (SWR) floor trap ,plain with grating including jointing with solvent cement |
| 100 | M&L for PCC 1:4:8 type D2 (using 40mm graded stone aggregate) as concrete bed, laid to falls in trenches in any depth including packing under, and haunching against the sides of RCC /SGSW pipes 150mm bore, after the pipes have been laid and tested including complete all as specified and directed |
| 101 | M&L RCC drain pipes NP-2 of dia 150mm bore laid in trenches and jointed completed with collar complete allas specified and directed. |
| 102 | M&L for PCC 1:2:4 type B-1 using 20mm graded stone aggregates as in benching for manholes,bands, coping, bed plate etc including slightly chamfered or rounded angles including including necessary form work, if any, and finishing exposed surface even and smooth using extra cement complete. |
| 103 | S & F rolled sections as in main and cross beams, hip and jack rafters,truss, purlins where connected to common rafters and running rails, cleat or other connecting plates cutting, welding including Nut Bolts, Fe 410-W(Gde -E-250) quality A, including taking down old wooden truss of any type complete all as specified and directed. |
| 104 | S and F steel work in tubular trusses including special shaped washers etc complete using ERW or induction butt welded tubes confirming to I.S 1161-1979 grade St 240 complete all as specified |
| 105 | S&F Pre-painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws as specified. |
| 106 | S&F Pre-painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws as speci |
| 107 | Dismantling aesbestos cement (Corrugated , semi corrugated , etc ) sheets in roof coverings |
| 108 | M&L for 100mm thick PCC 1:4:8 type D-2 (using 40mm graded stone aggregate) in sub base of floor. |
| 109 | M&L for 75mm thick PCC 1:2:4 type B-2 (using 40mm graded stone aggregate) floor./hardstanding laid in alternet bays complete all as specified |
| 110 | M&L for machine cut kota stone slab flooring of size 550mm x 550mm 18-20 mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab as in floors including rubbing and pollishing completeincluding 15 mm thick screed bed in CM 1:4 all as specified and directed. |
| 111 | M & L for 18-20 mm thick machine cut kota stone slab laid over 15 mm thick screed bed of cm 1:6 as in flooring & riser and jointed with grey cement slurry mixed with pigment to match the shade, rubbing and polishing incl dismantling / demolition and rubbish off the primises etc complete all as specified and directed. |
| 112 | M&L for Machine pressed coloured precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60mm thickness, M-35 grade with grey cement and no pigments over and including 25mm thick sand cushioning complete all as specified and directed.make |
| 113 | S&Ffor MS curtain road powder coated of 18/20mm dia with finials and bracket with matchable complete all as specified and directed. |
| 114 | Material and labour for providing and fixing (i) Gl frame work for seamless ceiling comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre(ii).Hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I.flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete all as specified |
| 115 | Material and labour for providing and fixinggypsum board 12.mm thick on ceiling fixedwith screws as per manufacturer instructions |
| 116 | M and labour for applying 2mm thick wall care putty on ceiling incl applying two coats of oil bound distemper overone coat of primer complete all as specified and directedcomplete all as specified and directed |
| 117 | M & L machine pressed coloured chequered tiles of size 300 x 300 x 25 mm thick laid over 15 mm thick screed bed in CM 1:6 bedded and jointed in neat cement slurryincl dismantling / demolition and rubbish off the primises etc complete all as specified and directed. |
| 118 | M & L for Point wiring with 1.5 Sqmm(Nominal Area) 1100 Volt Insulated, FRLS unsheathed multi stranded flexible copper conductor cable in and incl new PVC concealed conduit not less than 20 mm dia 1.5 mm thick for one light / fanpoint or bell pointcontrolled by one switch (including cutting chases and making good the distributed surface ) and fixing new 3 mm thick hylem sheet top cover, sheet screws and 1.6 mm thick GI sunken boxes included 1.5 sqmm stranded copper conductor with green PVC insulation earth contunity conductor connected to comman earth dolly etc. complete all as specified and directed for the following:- NOTE : The cost of sunken boxes and bakelite sheet is included in the quoted rate) |
| 119 | One light point/Bell/Fan point controlled by one switch. |
| 120 | One 3 pin 5 amps switch socket on independent board. |
| 121 | One 3 pin 5 amps switch socket on same board. |
| 122 | Supply and fixing switch piano type 6 Amps one way 230 volts AC complete all as specified and as directed. |
| 123 | Supply and fixing of socket outlet two-in-one, 3 pin each suitable for 5Amperes flush type, 230 volts AC complete all as specified and directed. |
| 124 | Supply and fixing ceiling rose 65/50 mm two to three terminals complete all as specified. |
| 125 | Supply and MCB 32 Amps single pole with neutral, AC 230 Volts complete all As specified and directed. |
| 126 | Supply and fix MCBs single pole (SP) 6 to 32 Amps with 10 KA breaking capacity of "B" series in distribution boards complete all as specifiedand directed. |
| 127 | Supply and fixing Sheet metal enclosure for DB"s when MCB"s to be used doubledoor factory made flush fixed complete with 200 Amps rated busbar 240 Volts single phase 4 ways complete all as specified and directed. |
| 128 | Supply,laying & fixing double wall corrugated (DWC) pipes made of high density polyethylene (HDPE) with all accessories i.e. all type of joints,sockets,elbows,bends and end cap etc. of size 75 mm outer dia and 61 mm inner dia complete all as specified and directed. |
| 129 | Supply and fixing of LED T-8 tube light fitting with sinle side connection LED tube rod 18/20 W, 4 Feet made of CRCA sheet steel box type including bipin holder and connection with PVC insulated twin core 23/0.0076 twisted copper cable from ceiling rode to light fitting complete all as specified and directed. |
| 130 | Supply and laid in trenches/ on wall and floor LT UG XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 10 sqmm 2 core complete all as specified and directed. |
| 131 | Material and labour of lamp holder insulated body with back plate batten /angle type for batten fittings with LED bulb 230 V AC 9/10 Watt cool day light 6500 k having maximum height 1020 mm heavy duty complete all as specified. |
| 132 | Supply and fixing, testingSingle phase propeller type ventilating ( Exhaust fan) heavy duty AC 230 volts 250 mmsweep, PVC body complete with louvrers and shutters complete all as specified and directed. |
| 133 | M & L for service wire 10 sqmm 2 core pvc insulated and pvc sheathed1100 volt grade complete all as specified and directed. |
| 134 | M&L for earthing completewith galvanisedsteelearth plateelectrode of size 600 mm x 600 mm x 6 mm thick buried directly in ground (earth pit not less than 2.25 mtr deep below normal ground level) with top edge of the plate not less than 1.5 mtr below ground level, connected to galvanized earth lead wire 4.00 mm dia by means of bolts nuts check nuts & washers of galvanized iron or steel , procteded by GI pipe 15 mm bore( light grade)and watering pipe 20 mm bore GI pipe(light grade ) andchamber of pcc 1:4:8 type D2 using 40 mm graded stone aggregate and coping shall be in PCC 1:3:6 type C1 using 20mm graded stone agg.50 mm thick cover of RCC 1:2:4 type B1 using 20 mm graded stone agg. reinforced with 8 mm dia MS tor bar @ 80 mm c/c both ways including excvation and earth work and removal of surplus soil complete all as shown in electrical plate no 3 of SSR PART 1 , with charcoal dust and saltcomplete and earth leadconnected to earthing test point (up to main switche, DBs) completeall as specified &testing on completion. |
| 135 | Taking down carefully the existing aluminium/copper point wiring of any size and capacity and type by disconnecting from the either terminals complete including fittings and fixtures such as switches , sockets , ceiling rose , regilators and light fitting any type etc by unscrewing and taken away from site complete. |
| 136 | M & L for Point wiring in replacement with 1.5 Sqmm(Nominal Area) 1100 Volt Insulated, FRLS unsheathed multi stranded flexible copper conductor cable in existing PVC concealed conduit not less than 20 mm dia 1.5 mm thick for one light / fan point controlled by one switch (including cutting chases and making good the distributed surface ) and fixing new 3 mm thick hylem sheet top cover, sheet screws and 1.6 mm thick GI sunken boxes included 1.5 sqmm stranded copper conductor with green PVC insulation earth contunity conductor connected to comman earth dolly etc. complete all as specified and directed for the following:- NOTE : The cost of sunken boxes and bakelite sheet is included in the quoted rate) |
| 137 | One light / Fan point/ Exhaust fan point controlled by one 5 Amp switch one way. |
| 138 | Description all as per Srl item No 133.00 above but on the Indepedant board completeall as specified |
| 139 | Description all as per Srl item No 133.00 above but on the same board completeall as specified |
| 140 | Description all as per item No133.00 above but with 2.5 Sq mm size cable multi stranded FRLS copper wire unsheathed for one 3 pin socket outlet 15 Amps on independent board including continuous earth wire of PVC insulated 2.5 Sq mm copper solid conductor connecting to common earth dolly complete. |
| 141 | Supply and fixing in replacement switch piano type 6 Amps one way 230 volts AC complete all as specified and as directed. |
| 142 | Supply and Fixingin replacementsocket outlet 5 pin, 6 Amps flushtype 230 volts AC complete all as specified and as directed |
| 143 | Supply and Fixingin replacementswitch piano 16 Amps type one way 230 volts AC complete all as specified and as directed |
| 144 | Supply and Fixingin replacementsocket outlet 6 pin 6/16 Amps multi purpose flushtype 230 volts AC complete all as specified and as directed |
| 145 | Supply and Fixing in replacementswitchtype regulator 5 step230 volts ACcomplete all as specified and as directed |
| 146 | Supply and fixingin replacement ceiling rose 65/50 mm two to three terminals complete all as specified. |
| 147 | Supply and fixin replacementMCB 32 Amps single pole with neutral, AC 230 Volts complete all As specified and directed. |
| 148 | Supply and fixin replacementMCBs single pole (SP) 6 to 32 Amps with 10 KA breaking capacity of "B" series in distribution boards complete all as specifiedand directed. |
| 149 | Supply and fixingin replacementSheet metal enclosure for DB"s when MCB"s to be used double door factory made flush fixed complete with 200 Amps rated busbar 240 Volts single phase 12 ways complete all as specified |
| 150 | Supply , laying & fixing in replacement double wall corrugated (DWC) pipes in replacement made of high density polythylene(HDPE) with all accessories i.e. all types of joints, sockets, elbows, bends and end cap etc of size 75 mm outer dia and 61 mm inner dia complete all as specified and directed. |
| 151 | Supply and fixing in replacement of LED T-8 tube light fitting with sinle side connection LED tube rod 18/20 W, 4 Feet made of CRCA sheet steel box type including bipin holder and connection with PVC insulated twin core 23/0.0076 ywisted copper cable from ceiling rode to light fitting complete all as specified and directed. |
| 152 | Material and labour for replacement of lamp holder insulated body with back plate batten/angle type for batten fitting with LED Bulb230V AC10 watt cool day light 6500Kcomplete all as specified. |
| 153 | Supply & fix in replacement ofLED Street Light Luminaire 25 watt 6000K with .high power LED cool white,CRI 75,+/- 5% supply voltage 220/240/50 Hz, light engine driver base.pole adapter,powder coated pressure die cast aluminium with heat resistant toughened glass with lens. |
| 154 | Supply and fixingin replacement of security lightmounting bracket made out of GI pipe 40 mm dia medium Grade not less than with 1.2 m.long in any shape with 2 nos ofpole fitting clamps made out of MS flat of size 40 x 6 mm and nutsand boltsand painting with aluminium paint,all as direced by Engr in Charge |
| 155 | Suply, laying and testingin replacementXLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 10 sq. mm 4 core |
| 156 | M&L for earthing completein replacementwith galvanisedsteelearth plateelectrode of size 600 mm x 600 mm x 6 mm thick buried directly in ground (earth pit not less than 2.25 mtr deep below normal ground level) with top edge of the plate not less than 1.5 mtr below ground level, connected to galvanized earth lead wire 4.00 mm dia by means of bolts nuts check nuts & washers of galvanized iron or steel , procteded by GI pipe 15 mm bore( light grade)and watering pipe 20 mm bore GI pipe(light grade ) andchamber of pcc 1:4:8 type D2 using 40 mm graded stone aggregate and coping shall be in PCC 1:3:6 type C1 using 20mm graded stone agg.50 mm thick cover of RCC 1:2:4 type B1 using 20 mm graded stone agg. reinforced with 8 mm dia MS tor bar @ 80 mm c/c both ways including excvation and earth work and removal of surplus soil complete all as shown in electrical plate no 3 of SSR PART 1 , with charcoal dust and saltcomplete and earth leadconnected to earthing test point (up to main switche, DBs) completeall as specified &testing on completion. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
