Military Engineer Services-MES has published Tender For Welcome Maintenance And Certain Misc Repair To Pocket 5 And 6 Under Age B/R-Ii Of Ge Roorkee. Submission Date for this Tender is 23-05-2024. miscellaneous tender Tenders in roorkee Uttarakhand. Bidders can get complete Tender details and download the document.
| Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
| 1 | 11-May-2024 | Revised BOQ | BOQ | 23-05-2024 |
| FileName | File Description | File Size |
| 37c3daed-484f-4e98-b6f3-9590a4a49a5e.html | Tender Notice | 0 KB |
| 375TENDERDOCS.pdf | Tender Document | 0 KB |
| BOQ_729857.xls | Tender Document | 0 KB |
| Tendernotice_1.pdf | Tender Document | 0 KB |
| Sl. No. | Item Description |
| 1 | Taking down shutters of any description exc 1.00 Sqm and n.exc 2.00 Sqm each complete all as specified and directed . |
| 2 | S&F Factory made 35 mm thick 2nd class H.W plain framed paneled shutters( two panel) with lock rail and panel of 9mm thick B.W.P commercial ply or 12mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS 1003 (part I) kiln seasoned and chemically pressure treated complete all as specified and directed. |
| 3 | S & F Factory made 35 mm thick 2nd class HWglazed skeleton shutter divided into square with plain chamfered or rounded with sash barsopen rebated and prepared to receive glass/gauge etc. withplain chamfered rounded fitted with cut and mitred beads size of members ofwindow, ventilator shutters, etc. are provided with stiles and rails as specified in SSR Part I, Section 8 clause 8.24 (a) and fitted to chowkhat complete all as specified and directed . |
| 4 | S & Fstainless steel wire cloth 0.36mm nominal dia of wire nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks, or stainless steel wire staples, complete all as specified and directed . |
| 5 | S&F Stainless steel butt hinges 100 mm size, medium weight , having flap size 100 mm X 58 mm X 1.90 mm thick and dia of hinge pin 5.6 mm fixed with 8 nos stainless steel screws as per IS 12817 of 2013 complete all as specified and directed. |
| 6 | S&F 200 mm size Stainless steel barrel tower bolt, with width of barrel 33 mm and thickness 0.70 mm having dia of bolt 10 mm as per IS-15833 of 2009 complete all as specified and directed. |
| 7 | S&F 300 mm size Stainless steel sliding door bolt, hasp & staple type with 16 mm dia rod, for use with Pad lock, with and including minimum06 nuts and bolts, 4 on bolt plate and two on staple plate as per IS-15834 (2008) complete all as specified and directed. |
| 8 | S&F 150 mm Stainless steel handlesfabricated type bright finish having metal thickness 3 mm complete fixed with 4 nos stainless stell screws complete all as specified and directed. |
| 9 | S&F mild steel 100 mm size of butt hinges, (ISI Marked) medium weight cold rolled and welding to steel door chowkhats at any floor up to four storied bldgs complete all as specified and directed. |
| 10 | S & F 300mm in mild steel ordinary rat tail rod pattern door spring closer (Helical door spring) incl roller and roller plate incl fixing to steel frame or to wooden frame complete all as specified and directed. |
| 11 | M & L for preparation of newly surface of wood and wood based surfaces by knotting, stopping etc of any description exc 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed. |
| 12 | Taking down chowkhat or frames with shutters (without taking off shutter from the frame) exc 1.50 Sqm but n.exc 4.00 Sqm each complete all as specified and directed . |
| 13 | Taking down chowkhat or frames with shutters (without taking off shutter from the frame) n.exc 1.50 Sqm each complete all as specified and directed . |
| 14 | S&F MS framed work such as grills, gratings, hold fast etc with ends of bars shouldered and or riveted or forged into spikes, framed guard bar, barred iron door, ladders, framed balusters, walk way, railings frame work of water tank and similar work confirming to Fe 290 Gde E165 complete all as specified and directed. |
| 15 | M&L for PCC (1:2:4) Ty B-0 using 12.5mm thick course aggregate as in hold fast etc of size 230mmx150mmx150mmcills/steps/coping etc complete all as specified and directed. |
| 16 | S&F factory made solid PVC door frame of size 50x47mm, made out of 5mm thick plain colour PVC sheet, reinforced with MS square tube fixed with screws/plugs to brick walls complete all as specified and directed. |
| 17 | S&F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails, MS frame shall be covered with heat moulded plain colour PVC "C" channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; paneling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, supplying & fixing in the frame at site as per specification & drawing complete all as specified and directed. |
| 18 | S&F 100mm size PTMT butt hinges and fixed complete all as specified and directed. |
| 19 | S&F 200mm size PTMT tower bolt and fixed complete all as specified and directed. |
| 20 | S&F 125mm size PTMT door handles and fixed complete all as specified and directed. |
| 21 | S&F Factory made Steel windows with side hung shutters incl box type hinges with steel handles and steel peg staywith glazing bars dovetailed or welded complete all as specified and directed. |
| 22 | S&F Factory made Steel windows with side hung shutters incl box type hinges with steel handles and steel peg stay without glazing bars dovetailed or welded including stainless steel wire cloth 0.36mm nominal dia of wire nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks, or stainless steel wire staples complete all as specified and directed. |
| 23 | M&L for preparation of new steel and iron surfaces of any description exc 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed. |
| 24 | S&F 3 mm thick plain, ordinary quality sheet glass and glazing with oil putty or fixed with wooden beads in square not exc. 0.5 sqm in each pane complete all as specified and directed. |
| 25 | S&F 3 mm thick figured glass, pin head type and glazing with oil putty or fixed with wooden beads in square not exc. 0.5 sqm in each pane complete all as specified and directed. |
| 26 | Dismantling and taking down existing water tank and S&F Rotational moulded polyethylene water storage tanks (ISI marked) (cylindrical vertical with closed top) triple layer of 500 Ltrs capacity including 20mm dia bore PTMT ball valve, hoisted and fixed in position and making all necessary connections with and including connectors of suitable size complete all as specified and directed. |
| 27 | Disconnecting existing water storage tank of any description (PVC, Cemented, AC or GI) n.exc 500 Ltrs capacity, cleaning and removing all scale and dirt etc from bottom & walls of tank and washing down including cleaning the mouth of inlet & outlet pipes etc, re-fixing in the same position and marking date of cleaning and next due date of cleaning with synthetic enamel paint using stencil cut letters & figures complete all as specified and directed. |
| 28 | Disconnecting existing water storage tank of any description (PVC, Cemented, AC or GI ) exc 500 Ltrs but n.exc 1000 ltrs capacity, cleaning and removing all scale and dirt etc from bottom & walls of tank and washing down including cleaning the mouth of inlet & outlet pipes etc, re-fixing in the same position and marking date of cleaning and next due date of cleaning with synthetic enamel paint using stencil cut letters & figures complete all as specified and directed. |
| 29 | M&L for Coloured non-skid ceramic joint free coloured tiles 7 to 8 mm thick (Square / rectangular), area of each tile exc 0.18 Sqm but not exc 0.36 Sqm in floors etc, laid over and including 15mm thick screed bed or bedding layer in cement mortar (1:6) in flooring, set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed. |
| 30 | M&L for glazed coloured(Digital colour) ceramic joint free tiles of size 350x 250x 7 mm/ 450X 350X 7mm thick as required, laid in vertical surfaces as in dodo, skirting etc over and including 10mm thick screed bed/backing in cement mortar (1:4), set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed. |
| 31 | M&L Coloured (Digital colour) Non - skid Ceramic colouredjoint free tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and incl 15 mm thick screed bed in CM 1:6 complete all as specified and directed. |
| 32 | M&L for brick work with sub class "B" bricks straight or curved on plan exc 6 m mean radius built in cement mortar (1:6) using course sand ccomplete all as specified and directed. |
| 33 | All as per item No 32.00 above but except bricks complete all as specified and directed. |
| 34 | M&L for 15 mm thick rendering in cement mortar (1:6) on fair faces of brick work of concrete surfaces of walls, finished even and smooth (without using extracement) complete all as specified and directed. |
| 35 | M & L for 15 mm thick rendering on other than fair faces of brick work surface with cement mortar 1 : 4 finished even and smooth (without using extracement) complete all as specified and directed. |
| 36 | M&L for preparation of newly plastered surfaces of walls and applying 1.00mm thick wall care putty of approved makes as on wall surfaces and a coat of wall primer and two coats of oil bound distemper(White or tinted) complete all as specified and directed. |
| 37 | M&L for preparation of newly plastered surfaces of walls and applying two coats of cement base paintcomplete all as specified and directed. |
| 38 | S&F in repairs, 15mm bore GI tubing (ISI marked), medium grade with all fittings and fixed to walls and ceilling or laid in flooring including connection complete all as specified and directed. |
| 39 | S&F in repairs, 20mm bore GI tubing (ISI marked), medium grade with all fittings and fixed to walls and ceiling or laid in floor complete all as specified and directed. |
| 40 | Demolition of cement concrete etc (un-reinforced) of any description along with sub base in ground floors and paving n exc. 15cm thickness (below or above ground level) un-reinforced concrete & removal of rubbish beyond defense land complete all as specified and directed. |
| 41 | M&L 25mm thick PCC type B-1, 1:2:4 (20mm graded stone aggregates) as in sub floor complete all as specified and directed. |
| 42 | M&L for 75mm thick cement concrete (1:3:6) type C-2 (using 40 mm graded stone aggregate) as in flooring, path, plinth protection and the like, laid in alternate bays n.exc 2.50 Sqm and joints filled withmastic filling including finishing even and smooth without using extra cement complete all as specified and directed. |
| 43 | S&F in repairs,3 mm thick plain, ordinary quality sheet glass and glazing with oil putty or fixed with wooden beads in square not exc. 0.5 sqm in each pane complete all as specified and directed. |
| 44 | S & F in repair stainless steel wire cloth 0.36mm nominal dia of wire nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks, or stainless steel wire staples, complete all as specified and directed . |
| 45 | M&L for built in steel cup board with pressed steel frame of size 75mm x 45mm x 1.25mm th with pressed steel shutter 1mm th Godrej pattern fixed to masonry wall by hold fast made out of 25x3 mm flat iron including ms hanging rod of 10 mm dia with bracket fixed on inner side of one leaf of shutter and on other leaf provision of ms peg set of 3 pegs including spray including locking arrangement painting with two coats of synthetic enamel paint over one coat of red oxide primer with two coats of synthetic enamel paint over one coat of red oxide primer all around on steel surface of frame & shutter and making good disturbed portion in cm 1:3 or pcc 1:2:4 complete all as specified and directed. |
| 46 | S&F in repairs brass chromium plated bib tap for iron pipe of 15mm borefancy type with crutch or butterfly handle, screwed down high pressurecomplete all as specified and directed. |
| 47 | S&F in repairs 15mm dia brass chromium plated pillar tap with fly nuts capastan head screwed down high pressure with or without lettered hot or cold with long scewed shankcomplete all as specified and directed. |
| 48 | S&F in repairs stop cock 15 mm bore ISI marked fancy type (Concealed) cast copper alloy, screw down high pressure with crutch or butterfly handle screwed both ends suitable for iron pipe of 15mm borecomplete all as specified and directed. |
| 49 | S&F in repairs stop/angle cock 15 mm bore ISI marked fancy typechromium plated, screw down high pressure with crutch or butterfly handle screwed both ends suitable for iron pipe of 15mm borecomplete all as specified and directed. |
| 50 | S&F in repairs CP brass shower rose 125mm size shower with 300mm arm suitable for 15mm bore pipecomplete all as specified and directed. |
| 51 | S&F in repairs, PVC connection 450/600mm long with brass check nuts & washers at both ends suitable for 15mm bore pipe complete all as specified and directed. |
| 52 | S&F in repairs 10 ltrs PVC (White) valve less syphonic action type, flushing cistern low level with inlet ball valve float, handle, Aluminium brackets forbottom support fixing with gitties embeded in wall with drilling machine etccomplete all as specified and directed. |
| 53 | S&F in repairs, plastic water closet (EWC) seat cover white closed pattern with flat bottom and cover including mild steel chromium plated hinging device complete all as specified and directed. |
| 54 | S&F in repairs, vitreous china wash down water closet pan (Pedestal pattern) white incl "P" or "S" trap and making good the disturbed surface to match with the existing flooring complete all as specified and as directed. |
| 55 | S&F in repairs, health faucet 8 mm dia 1.20 mtr long flexible tube and wall hook complete all as specified and directed. |
| 56 | vitreous china squatting pan "Orissa pattern" long pan of size 580x440mm white, with integral footrest & "P" or "S" trap including connection to trap, flushing pipe, anti-syphonage pipe etc and making good the floor to match with the existing surfaces complete (excludingflushing cistern and flush pipe)complete all as specified and directed. |
| 57 | S&F in repairs, vitreous china wash hand basin, white flat back size 550 x400 mm excluding pillar tap but including waste coupling, waste pipe and a pair of MS bracket painted with 02 coats of synthetic enamel paint over 01 coat of red oxide primer etc complete all as specified and directed. |
| 58 | S&F in repairs, looking mirror 600 x 450 x 5 mm thick with aluminium channel frame, selected quality, mounted on 6 mm thick commercial ply wood (BWR grade) back and fixed with chromium plated brass screws and cup washers complete all as specified and directed. |
| 59 | S&F in repairs Grating doom 75/100 mm dia of PTMT( with or wihout hole) (Minimum weight 25 gms) complete all as specified and directed. |
| 60 | S&F in repairs ball valves of 20 mm bore high pressure of PTMT with epoxy coated aluminium rod & high-density plastic ball including required sockets screwed for iron pipe and fixed complete all as specified and directed. |
| 61 | Dismantling wall and ceiling board (fibre, pulp , insulation etc) or insulation boards/ slabs any thickness complete all as specified and directed |
| 62 | M&L for Providing and fixing tiled false ceiling of designer tiles(high pressure steam Cured) of 4mm thickness (as per IS:14862) of size 595x595mm and any one of the design ( Cascade or Electra or equivalent) in true horizontal level, suspended on inner locking metal grid of hot dipped galvanized steel sections ( galvanized @ 120 grms, both side inclusive and black painted groove on all T webs) consisting of main “T” runner with suitably spaced joints to get required length and 15x32mm made from 0.3mm thick sheet, 1200mm long spaced between main “T” at 600mm C/C to form a grid of 1200x600mm and secondly cross “T” of length 600mm and size 15x32mm made of 0.30mm thick sheet to be interlocked at middle of 1200x600mm panel to form grids of 600x600mm and wall angle 15x20x0.36mm and laying false ceiling tiles in the grid including, required cutting / making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main “T” runners to be suspended from ceiling using GI soffit cleats fixed to existing RCC lintel with dash fasteners, GI adjustable rods of 3mm dia with galvanized butterfly level clips, spaced at 1200mm c/c along main “T”, bottom exposed width of 15mm of all “T” sections shall be pre-painted with polyester paint and black painted groove at center of size 4mm depth and 4.5 mm width, all complete at all heights as per directions. |
| 63 | S&F in repair Aluminium anodised barrel tower bolt of extruded section, 150mm long complete all as specified and directed. |
| 64 | S&F in repair Aluminium anodised barrel tower bolt of extruded section, 200mm long complete all as specified and directed. |
| 65 | S&F in repair 100mm long aluminium handle, cast type, anodised complete all as specified and directed. |
| 66 | S&F in repair 150mm long aluminium handle, cast type, anodised complete all as specified and directed. |
| 67 | Taking down shutters of any description exc 1 sqm and not exc 2 sqm each and refixing same openingcomplete all as specified and directed. |
| 68 | Taking down shutters of any descriptionnot exc 1 sqm each and refixing same openingcomplete all as specified and directed. |
| 69 | S&F in repair Gun-metal globe or gate valves 20mm bore with iron wheel head, screwed both ends for ironcomplete all as specified and directed. |
| 70 | S&F in repairs HDPE PVC lid (cover) for 500/1000 Ltrs capacityPVC tank complete all as specified and directed. |
| 71 | S&F in repairs, 25 mm dia stainless steel fancy type curtain rod in suitable size with and including stainless steel fancy type brackets, stops of matching colour and necessary curtain rings, side caps etc complete all as specified and directed. Note: The quoted rate is deemed to be included for 01 pair of brackets for each length of door/window/opening where fixed. |
| 72 | S&F in repairs, 18mm thick Particle board, medium density, flat pressed,single layer type or three layer type with BWR type adhesive, fixed with screws to timber frame work 3mm thick te4qak wood lipping on edges including dismantling of boarding, any description fixed in any position with nails complete all as specified. |
| 73 | M&L for complete removal of existing decorative treaatment of any description on walls including washing, rubbing down etc and applying 1.5 mm thick layer of wall care putty of approved quality to obtain smooth finishes surfaces for applying one coatof oil emulsion distemper using rollers on walls over a coat of primer complete all as specified and directed. |
| 74 | M&L for 15 mm thick rendering in cement mortar (1:6) on fair faces of brick work of concrete surfaces of walls, finished even and smooth (without using extracement) including, racking out joints, hacking for key scrubbing down with water complete all as specified and directed. |
| 75 | M&Lpreparation of newly plaster surface of wall applying 2 mm thick white cement base wall care putty to obtain smooth finishes and applying two coatsof distemper oil bound emulsion usingrollers over a coat of primercomplete all as specified and directed. |
| 76 | M&L Rendering 15 mm thick in CM 1:4 on external fair faces of brick/concrete work surfaces finished even and smooth (without using extra cement) including, racking out joints, hacking for key scrubbing down with water complete all as specified and directed. |
| 77 | M&L for preparation of newly plastered surface on walls and applying two coat of colour wash over a coat of white wash complete all as specified and directed. |
| 78 | M&L for preparation of old decorated surfaces (plastered/ un-plastered) of walls incl cornices by brooming down with steel brush, scrapping down smoke soot, moulds, moss andefflorescent salts and trading oil and greasy spotsand applying One coat of colour wash on walls complete all as specified and directed. |
| 79 | M&L for 5 mm thick rendering on ceiling with cement mortar 1:3 finished even and smooth (without using extracement) complete all as specified and directed. |
| 80 | M&L for preparation of newly plastered surface on ceiling and applying three coat of white wash complete all as specified and directed. |
| 81 | M&L for preparation of old decorated plastered surfaces of ceiling and applying one coat of white wash complete all as specified and directed. |
| 82 | M&L for preparation of old painted surface of wood and wood based surfaces by knotting, stopping etc of any description exc 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed. |
| 83 | M&L for preparation of old painted steel and iron surfaces of any description exc 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed. |
| 84 | M&L for preparation of old decoratedwall surfaces by complete removal of existing treatment on walls including cornices by broming down with steel brush, scrappingdown smoke soot, moulds moss and efflorescent salts and trading oil and grease spots andapplying one coat of cement base paint complete all as specified and directed. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
