Military Engineer Services-MES has published Tender For Special Repairs To Bldg No. P-35, P-36 And P-17 (Or Md Accn) At Lower Leimakhong Mil Stn. Submission Date for this Tender is 24-05-2024. Building Work Tenders in leimakhong Manipur. Bidders can get complete Tender details and download the document.
| Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
| 1 | 17-May-2024 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 24-05-2024 |
| Sl. No. | Item Description |
| 1 | Dismantling floor, hearth or wall tiling including cement mortar bedding, (but not backing) removing serviceable tiles to store and rubbish off the premises complete all as specified and directed. |
| 2 | Material and labour for 25mm thick PCC (1:2:4) type B0 (using 12.50mm graded stone aggregate) as in sub base of floor, finished the surface even and rough to receive the top layer complete all as specified and as directed. |
| 3 | Material & Labour fornon skid ceramic coloured tiles7 to 8mm thick (square /rectangular) of premium quality, area of each tile exceeding 0.18 sqm but not exc 0.38sqm in floors etc.set & jointed in neat cement slurry & pointed in white or coloured cement to match including screed bed of mortar 15 mm thick in Cement Mortar 1:4 complete all as specified and as directed. Note: The colour / shade / design of tiles shall be as approved by GE |
| 4 | Material & Labour for non skid ceramic coloured tiles7 to 8mm thick (square /rectangular) of premium quality, area of each tile exceeding 0.06 sqm but not exc 0.11sqm in floors etc.set & jointed in neat cement slurry & pointed in white or coloured cement to match including screed bed of mortar 15 mm thick in Cement Mortar 1:4 complete all as specified and as directed. Note: The colour / shade / design of tiles shall be as approved by GE |
| 5 | Material & Labour forglazed ceramic coloured tiles 300 x 450 x 7 mm thick of premium quality on skirting/dado, set & jointed in neat cement slurry & pointed with white/coloured to match over and including rendering of 10mm thick in Cement Mortar 1:4 complete all as specified and as directed. Note: The colour / shade / design of tiles shall be as approved by GE. |
| 6 | Demolition of Stone Slab laid, bedded and pointed in Cement Mortar of any thickness complete all as specified and as directed. |
| 7 | Material and labour for 20 mm thick granite (of any type) work (table rubbed and polished) in steps, Jambs, pillars, window cills, cooking platforms,corner shelf, flat shelf and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite and including 20 mm thick cement plaster (1:4)including rounded the exposed surfaces of granite complete all as specified. |
| 8 | Material & Labour for machine cut Cudappah stone slab flooring using 20 to 25mm thick slabs, laid and jointed with grey cement slurry mixed with a admixture of pigment to match shade of slab including rubbing and polishing to smooth mirror finish all to required sizes, the size and design / pattern of slabs shall be as directed, including diagonals, inlays, borders, margins in two or more shades of slabs including screed bed of mortar 15 mm thick in Cement Mortar 1:4 complete all as specified and as directed. |
| 9 | Dismantling of plain or corrugated steel sheeting,any gauge, thickness, including similar pattern roof covering complete all as specified and as directed. |
| 10 | Supply and fixing pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws as specified complete all as specified and as directed. |
| 11 | Supply and fixing pre-painted galvalume aluminium zinc coating GI based plain steel sheet0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall/ridges, fixed with self tapping screws as specified complete all as specified and as directed. |
| 12 | Supply & Fixing pre fabricated 0.5mm thick mild steel valley gutters, drip and straight flashing complete all as specified and directed. |
| 13 | Dismantling wall /ceiling board(fibre pulp insulation) or insulation boards any thickness including cover fillets complete all as specified and directed. |
| 14 | Supply& Fixing false ceiling with GRG (Glass Fibre Reinforced Gypsum) false ceiling tiles 12mm thick of Size 595 x 595mm of approved texture, design and patterns having moisture content less than 2%, humidity resistance of 99%, NRC 0.50 to 0.75 as per IS 8225:1987, Noncombustible as per BS tiles 4 76 (part 4) - 1970 and light reflectance of 85% (minimum) to be laid in true horizontal level suspended on inter locking metal T- Grid of hot ddipped galvanized iron section of 0.33mm thick ( galvanized @ 120 grams per sqm including both sides) comprising of main T runners of size 15 x 32 mm of length 3000mm, cross-T of size 15 x 32 mm length 1200mm and secondary intermediate cross-T of size 15 x 32 mm of length 600mm of form grid module of size 600 x600mm, suspended from ceiling using galvanized mild steel items (galvanizing @ 80 grms per sqm) i.e 50mm long, 8mm outer diameter M-6 dash fasteners, 6mm dia fully threaded hanger rod upto 1000mm length and L shape level adjuster of size 85x25x2mm. Galvanised iron perimeter wall angle of size 24x24x0.40mm of length 3000mm to be fixed on periphery wall/ partition with the help of plastic rawl plugs at 450mm center to center and 40mm long dry wall wood screws. The work shall be carried out as per sepcifications, drawing and as per directions of the Enginner -in- Charge. |
| 15 | Taking down chowkat with shutter without taking off shutter from the frame n.exc 1.50 Sqm each complete all as specified and as directed. |
| 16 | Taking down chowkat with shutter without taking off shutter from the frame exc 1.50 Sqm but n.exc 4.00 Sqm each complete all as specified and as directed. |
| 17 | Taking down chowkat with shutter without taking off shutter from the frame n.exc 1.50 Sqm each and refixing in same opening after easing and adjusting complete complete all as specified and as directed. |
| 18 | Taking down chowkat with shutter without taking off shutter from the frame exc 1.50 Sqm but n.exc 4.00 Sqm each and refixing in same opening after easing and adjusting complete complete all as specified and as directed. |
| 19 | S & F Second Class Hard Wood, plain, solid, straight Chowkats and Frames, wrought, framed, rebated on the solid, rounded or chamfered, put together with glue, pinned at joints complete all as specified and directed. |
| 20 | S & F Factory made, 30 mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and as directed. |
| 21 | S & F Factory made, 35mm thick, Second Class Hard Wood, Glazed and Skeleton Shutters, open rebated and prepared to receive glass, gauze, etc., divided into squares, with plain, chamfered or rounded, mitred and rebated Sash Bars, any numbers, edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc., sizes of members of shutters as specified in SSR Part – I, Section 8, Clause 8.24 [a] and fitted to Chowkats complete all as specified and as directed. |
| 22 | S & F Solid PVC door frame of size 50mmX47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube in opening, sizes of sections and other details as specified in SSR Part – I, Section 8, Clause 8B.3.1 complete all as specified and as directed. |
| 23 | S & F Factory made solid panel PVC door shutter 30 mm thick [Style] consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC "C" Channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail, Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement fixing in frame at site as per specification complete all as specified and as directed. |
| 24 | Supply and fixing factory made uPVC white colour fixed glazed window/ventilator made of (small series) frame 47 x 50 mm mullion 47x 68mm both having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension (Area upto 0.75 sqm.) comprising of uPVC multi-chambered frame and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, G.I. fasteners 100 x 8 mm size for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware"s and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, all complete as per approved drawing including Stainless Steel Wire Cloth of 0.36mm nominal dia of wire and average width of aperture 1.40mm, selected quality 5mm thick sheet glass, aluminium anodized grill DG-104, 10mmx 5.2mm thick fixed with "F" section complete all as specified and as directed. Note: (i) The unit rate quoted by contractor including cost of glass Stainless Steel Wire Cloth, selected quality 5mm thick sheet glass, aluminium anodized grill DG-104 and includes all other connected accessories. Net opening will be measured for payment purpose. (ii) The size of UPVC sections specified in the description of item is as per minimum requirement. If the same size of section is not available, next higher size shall be provided by the contractor without any extra cost to the Department. |
| 25 | S & F Factory made UPVC Sliding Window, Three Track, White Colour of area not exceeding 2.0 Sq.m, made of extruded profiles with wall thickness of 2.3mm±0.2mm, Window profile with hollow section with multi chamber, Frame of size 88mm X 52mm, Sliding Sash of size 42mm X 67mm, Sliding Mesh Sash of size 42mm X 57mm, Sliding Interlock [One vertical length in each shutter] of size 45.50mm X 28mm, Glazing Bead of size 24.50mm X 16mm shall be mitred cut and fusion welded at all corners, including drilling holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware, EPDM Gasket, 1.2mm±0.2mm thick Galvanized Steel Frame of size 30mmx 18mm, 2 Nos, Sliding Sash of size 30mm x 18mm, Sliding Mesh Sash of size 26mm x 10mm profile to be inserted in required profile, frame shall be fixed to the wall with 8mm X 100mm long fasteners,Hardware such as Touch lock of zinc alloyed [white powder coated], Steel roller system, Stainless Steel Wire Cloth of 0.36mm nominal dia of wire and average width of aperture 1.40mm, selected quality 5mm thick glazing with sheet glass, aluminium anodized grill DG-104 and required accessories shall be provided with proper operative and locking hardware mechanism, frame shall be fixed to wall with high quality fasteners and silicon glue shall be applied to fill up gap between frame and wall to make leak proof complete all as specified and as per Manufacturer instructions. Note: (i) The unit rate quoted by contractor including cost of glass Stainless Steel Wire Cloth, selected quality 5mm thick sheet glass, aluminium anodized grill DG-104 and includes all other connected accessories. Net opening will be measured for payment purpose. (ii) The size of UPVC sections specified in the description of item is as per minimum requirement. If the same size of section is not available, next higher size shall be provided by the contractor without any extra cost to the Department. |
| 26 | Supply and fixing Galvanised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.00mm and fixed with tinned tacks, or galvanised wire staplescomplete all as specified and as directed. |
| 27 | Supply and fixing 75mm size Butt hinges, medium weight, cold rolled mild steel, and fixed complete all as specified and as directed. |
| 28 | Supply and fixing 100mm size Butt hinges, medium weight, cold rolled mild steel, and fixed complete all as specified and as directed. |
| 29 | Supply and fixing aluminium anodized, barrel tower bolts, 150mm long of extruded section complete all as specified and as directed. |
| 30 | Supply and fixing aluminium anodized, barrel tower bolts, 200mm long of extruded section complete all as specified and as directed. |
| 31 | Supply and fixing 150mm long extruded aluminium alloy handles, cast type, anodised complete all as specified and as directed. |
| 32 | Supply and fixing Floor Door Stopper of size 140 mm ofaluminium alloy body and tongue, anodised, with hard drawn steel spring complete all as specified and as directed. |
| 33 | Supply and fixing Aluminium alloy anodised Sliding Door Bolt with hasp and staple [Bolt Type] of size 300 mm and fixing clips of sheet cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy complete all as specified and as directed. |
| 34 | Material & Labour for Cupboard Shutter in required size at site, made out of 20mm rigid PVC sheet consisting of carcass & provision of shutter are required brackets, 5.5 screws etc. The panels shall be fabricated using adhesive and screws where ever required. All the edges shall be covered with 1mm edge bend type or 90 degree edge bend finish as per make and specification mentioned as per drawings. Various thickness of PVC celuka sheet manufactured by ISO 9001-2015 satisfied company termite proof water proof and flame retardant PVC sheet. PVC cabinet of required sizes fabricated by joining for 20mm thick rigid PVC sheet fixed with each other using solvant cement adhesive and screws and 6mm thick PVC sheet as backing of cabinet fixed with screws and solvent cement adhesive etc. PVC shelf/partition of required size consisting of panedl 20mm rigid PVC sheet and for supporting the hold of shelf, partition and shall provided 3 edges in sizes 20mm x20mm as per required length. The front side of the edge visible in the fornt of the shelf. Partition to be edge lipped by 20mm width into 1mm edge bend tape of desnity 600 kg per Cum with necessary connected items like handle, hinges etc complete all as specified and directed by Engr-in-charge and as per manufactures specifications and drawings. |
| 35 | Supply & fixing in repair of fancy type decorative Drapary MS rod of 20mm dia suitable for window and doors with decorating doom holders fixed to wall with screwscomplete all as specified and as directed. |
| 36 | Dismantling timber boarding of any description fixed in any position with nails complete all as specified and directed. |
| 37 | Material and labour well-seasoned second class hard wood Weather boarding, clean sawn, plain both side, fixed with butt joints with nails, 20mm thick or feather edged 15 mm to 20mm thick and fixed with 30mm laps complete all as specified and as directed. |
| 38 | Demolition of brick work or stone/boulder masonry, built in cement mortar including all quions, arches, pillers etc complete all as specified and as directed. |
| 39 | Material and labour forbrick work with sub class `B` bricks, old size,straight or curved on plan exc 6m mean radius built in cement mortar (1:6) complete all as specified and as directed. |
| 40 | Materials and labour for half brick thick brick work with sub class "B" bricks straight or curved on plan to any radius built in cement mortar(1:4) complete all as specified andas directed. |
| 41 | Taking down cement plaster of any description built in cement mortar on brick or stone walls etc including raking out joints, hacking for Key, scrubbingdown with water etc. complete all as specified and as directed. |
| 42 | Material and labour for 15mm thick rendering in CM (1:4) onbrick work or concrete surface as on wall in two separate coat (10mm thick backing coat and 5mm thick as finishing coat mixed with integral water proofing compound @ 3% by wt of cement,finished the surface even and fair complete all as specified and directed. (Note:Water proofing compound shall be measured & paid separately) |
| 43 | Materials and labour for 10 mm thick rendering on other than fair faces of brick work or concrete surface as on wallin cement mortar (1:6) andfinished the surfaces even and smooth without using extra cementcomplete all as specified and as directed. |
| 44 | Supply only integral water proofing compound (WPC) of best quality (ISI marked on packet) completeall as specified and as directed. |
| 45 | Materials and labour for 5 mm thick rendering onconcrete surfaces as on ceilingin cement mortar (1:3) andfinished the surfaces even and smooth without using extra cementcomplete all as specified and as directed. |
| 46 | M&L for waterproof cement based putty @ 1 Kg(undiluted) per sq mtr. of average thickness 3 mm over the plastered/old painted wall after scrapping to prepare the surface even and smooth complete and sanding of the putty surface with mechanical wall sander (having mechanical vacuum mechanism) having RPM not less than 1500, sanding pad of 240 Grit or above to make the surface free from dust etc. by skilled labour as per following steps:- Step 1) Mix the putty powder by adding water as per manufacturer instructions and mix it with putty mixer with the mixing capacity of min 2.5 kg putty per minute. Step 2) Apply the first coat the prepared mixer with the help of fully automatic airless spray machine of putty application having flow speed of max 6 ltrs per minutes with a maximum pressure 3300 PSI Step 3) Allow 6-8 hrs time to dry the putty surface. |
| 47 | M&L for waterproof cement based putty @ 1 Kg(undiluted) per sq mtr. of average thickness 3 mm over the plastered/old painted ceiling after scrapping to prepare the surface even and smooth complete and sanding of the putty surface with mechanical wall sander (having mechanical vacuum mechanism) having RPM not less than 1500, sanding pad of 240 Grit or above to make the surface free from dust etc. by skilled labour as per following steps:- Step 1) Mix the putty powder by adding water as per manufacturer instructions and mix it with putty mixer with the mixing capacity of min 2.5 kg putty per minute. Step 2) Apply the first coat the prepared mixer with the help of fully automatic airless spray machine of putty application having flow speed of max 6 ltrs per minutes with a maximum pressure 3300 PSI Step 3) Allow 6-8 hrs time to dry the putty surface. |
| 48 | Material and labour for applying two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (company Depot Tinted) with silicon additives @ 1.43 litre/ 10 Sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 Sqm as per manufacturer guidelines using Airless spray technology with max working pressure of 3300 PSI and capable of operating single spray gun with a max material hose length of 30 mtr the spray machine should be of reputed manufacturer with pro guard technology and capability of tracking pressure and paint usage and certified by paint manufacturer and as mentioned in PS and accessories for applying exterior paint should be able to spray in hard to reach areas and penetration of paint on the surface complete all as specified and directed. Note :-(a) Sanding of surface to be done by mechanical sander with 1500 - 2700 rpm, with internal dust extraction system for clean environment certified by paint manufacturer. |
| 49 | M & L for complete removal of existing Treatment on Wall by Scrapping with mechanical sander (having mechanical vaccum mechanism ) with sanding pad of appropriate grit to make surface clean, free from dust, loose paint etc by skilled labour and applying two coats of oil bound distemper including primer as per manufacturer guidelines using Airless spray technology with max working pressure of 3300 PSI and capable of operating single spray gun with a max material hose length of 30 mtr the spray machine should be of reputed manufacturer with pro guard technology and capability of tracking pressure and paint usage and certified by paint manufacturer and as mentioned in PS and accessories for applying distemper should be able to spray in hard to reach areas and penetration of distemper on the surface complete all as specified and directed. Note :-(a) Sanding of surface to be done by mechanical sander with 1500 - 2700 rpm, with internal dust extraction system for clean environment certified by paint manufacturer. |
| 50 | Notes for Serial Item No. 46 to 49: (a) The work pertaining to periodical servicesincluding removal of existing treatment shall be executed through authorized applicator of manufacturer of the materials .i.e. Paint, Distemper, Putty etc. proposed to be used by the contractor and approved by Garrison Engineer. (b) Cost of scafolding upto 10m hight of building is included in this item. (c) The work shall be executed by authorized reps of the approved manufacturer. The contractor shall submit the ‘Memorandum ofunderstanding’ (MOU) with one of the approved manufacturer before placing the work order. (d) 05 years guarantee of painting work will be admissible after date of completion and 15% amount will be retained against painting work after date of completion for a period of 05 years. |
| 51 | M & L for two coats of synthetic enamel paint over one coat of pink primer to newly untreated wooden surfaces over 10cm width or girth including preparation of surfaces complete all as specified and as directed. |
| 52 | M & L for two coats of Synthetic Enamel paint over one coat of Red Oxide / Zinc Chrome Primer on new steel surfaces over 10cm width or girth including preparation of surfaces complete all as specified and as directed. |
| 53 | M & L for preparation of old painted wood and wood based surfaces of any description not other wise described over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed. |
| 54 | M & L for preparation of old painted steel surfaces of any description not other wise described over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed. |
| 55 | Demolition of cement concrete (unreinforced) of any description and in any position not otherwise specifically provided for and removal of rubbish from the site complete all as specified and as directed. |
| 56 | Material and labour for PCC (1:3:6) type C-1 (using 20mm graded stone aggregate) as in surface channel and like etccompleteall as specified and as directed. |
| 57 | Materials and labour for Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/stopped ends etc.completeall as specified and as directed. |
| 58 | Material and labour for Plain cement concrete Type B1 [Nominal Mix] 1:2:4 using 20mm graded stone aggregate cast in situ in plinth courses, string courses, lacing courses, parapets and railings up to 60 cm in height, copings, kneelers, apex stones, bed plates including weathering, slightly rounded or chamfered angles and throating as directed including use and waste of form work, complete all as specified and as directed. |
| 59 | Demolition of cement concrete (unreinforced) in ground floors and paving n.exc.15cm thick (below or above ground level) and removal of rubbish from the site complete all as specified and as directed.. |
| 60 | Material & Labour for 75mm thick, PCC 1:3:6, Type C-1, using 20mm graded aggregate as in Plinth protection etc surface finished even and smooth without using extra cement and providing necessary joints 12mm wide to the full depth of PCC at every 3 meters and every change of directions and the joints duly filled with mastic filling comprising of 01 Part of heated bitumen blown grade any penetration and 3 parts of sand [all by weight] complete all as specified and as directed. |
| 61 | M & L for Forming Contraction Joint [Dummy], 65mm deep X 10mm wide, filled with sealing compound and sealed with Sealing Compound Grade "A" complete all as specified and directed. |
| 62 | Dismantling of Mild Steel or Wrought Iron Work of any description not otherwise provided for complete all as specified and as directed. |
| 63 | Material and labour for rolled mild steel for roof trusses ( framed), trussed, purlins, crane grantries, rails and fastenings and heavy bracket framing (beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. conforming to Fe 410-W (Gde-E-250) quality-A complete all as specified and directed. |
| 64 | S & F Mild Steel framed work conforming to Fe - 290, Grade E-165, as inGrills, Gratings etc with ends of bars shouldered and/or riveted, or forged into spikes, framed Guard Bars, Barred Iron Doors, Ladders, framed Balusters, Walk Ways, Railings, framework of Water Tanks and similar work complete all as specified and as directed. |
| 65 | S & F Mild Steel work confirming to Fe - 290, Grade E-165 as in Hand Rails, half round or other stock section or core for wooden hand-rail straight portion, drilled and countersunk for Balusters Running Bars, for Doors, Balusters, Nosing to Steps including embedding in concrete and screwing etc., Wind Ties for roof including securing bolts, Posts and Struts in Fencing including cutting tops to shape as directed, bendingto shape, notching for wire, drilling holes or as in flat iron fillets [forsecuring wire mesh and barbed wire etc.] including all necessary drilling, bolting or riveting, etc. and similar work complete all as specified and directed. |
| 66 | Taking up or down steel tubing 15mm bore and connections including cleaning for refixing and deposited to stores complete all as specified and directed. |
| 67 | Supply and fixing 15mm bore galvanised steel water tubing medium grade including all fittings and fixed complete to walls/ceiling or laid under floors complete all as specified and as direcetd. |
| 68 | All as per Serial Item No. 66 but except 15mm bore galvanised steel water tubing medium grade complete all as specified and as direcetd. Note: The serviceable pipes obtained from taking down vide serial No. 65 shall be re-used. |
| 69 | Taking up or down steel tubing 20mm bore and connections including cleaning for refixing and deposited to stores complete all as specified and directed. |
| 70 | Supply and fixing 20mm bore galvanised steel water tubing medium grade including all fittings and fixed complete to walls/ceiling or laid under floors complete all as specified and as direcetd. |
| 71 | All as per Serial Item No. 69 but except 20mm bore galvanised steel water tubing medium grade complete all as specified and as direcetd. Note: The serviceable pipes obtained from taking down vide serial No. 68 shall be re-used. |
| 72 | Supply and fix in repair PVC connection 15mm size with PTMT nuts of length 450mm complete all as specified and directed. |
| 73 | Supply and fixing in repairs 15mm bore fancy type chromium plated bib taps with crutch of butterfly handle screwed down for iron pipes complete all as specified and directed. |
| 74 | Supply and fix in repairs 15mm bore stop valve fancy type,chromium plated , screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions complete all as specified and directed. |
| 75 | Supply and fix in repair pillar taps 15mm dia bore fancy typewith capstain heads, chromium plated, screwed down high pressure, with or without lettered "Hot" or "Cold" with long screwed shanks and fly-nuts, screwed for iron pipe complete all as specified directed. |
| 76 | Supply and fixing in repairs 20 mm bore Ball Valves, 20 mm Bore, high pressure of PTMT with epoxy coated Aluminium rod & high-density plastic ball screwed for iron pipe [Minimum Weight 20mm - 210 Grams] etc. complete all as specified and as directed. |
| 77 | Supply and fixing in repairs looking mirror ofsize 600mm x 450mm x 5mm thick bevelled edge of selected quality glass, decorative type mounted on 6mm thick commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers completeall as specified and as directed. |
| 78 | Supply and fixing in repairs of size 125 mm brass chromium plated shower rose with or without swivel joints, any size including fixing to steel pipe or union complete all as specified. |
| 79 | Supply and fixing in repairs Vitreous China Ware Wash Hand Basin, white, Flat Back of size 630 mm X 450 mm including 32mm dia PTMT waste coupling with long screw shanks and fly nuts, flange end bedded in red led cement and other end fixed, rubber plug with rings including CI Brackets, cutting for and pinning in ends of brackets or erecting strand, 32mm bore PVC flexible Waste Pipe, PVC Connection of 15mm Bore and 450mm long with PTMT check nut and union etc. complete all as specified and as directed. |
| 80 | Fixing only in repairs of Vitreous China Ware Wash Hand Basin, white, Flat Back of size 630 mm X 450 mm including 32mm dia PTMT waste coupling with long screw shanks and fly nuts, flange end bedded in red led cement and other end fixed, rubber plug with rings including CI Brackets, cutting for and pinning in ends of brackets or erecting strand, 32mm bore PVC flexible Waste Pipe, PVC Connection of 15mm Bore and 450mm long with PTMT check nut and union etc. complete all as specified and as directed. |
| 81 | S & F in repairs Vitreous China Wash Down Water Closet [Pedestal pattern], White, including 10 Litres capacity, PVC Valve less, Syphonic action type, low level flushing cistern, white, with inlet ball valve, float, handle, flush pipe of polyethylene of lowor high density of PVC, 32mm dia, PVC Connection of 15mm Bore and 600mm long with PTMTcheck nut and union etc. including brackets and connections to pipe and flush pipe including plastic water closet seat back closed pattern with flat bottom and cover and mild steel chromium plated or aluminium hinging device and "P" or "S" trap complete all as specified and as directed. |
| 82 | S & F in repairs white Vitreous China Squatting Pan "Orissa Pattern" of size 580 mm X 440 mmwith integral foot rests and "P" or "S" Trap includingprovision of lime concrete bedding and 10 Litres capacity, PVC Valve less, Syphonic action type, low level flushing cistern, white, with inlet ball valve, float, handle, flush pipe of polyethylene of lowor high density of PVC, 32mm dia, PVC Connection of 15mm Bore and 600mm long with PTMTcheck nut and union etc. including brackets and connections to pipe complete all as specified and as directed. |
| 83 | Supply and fixing in repairs 15mm bore Stop valve of PTMT any colour high pressure screwed for iron pipe and fixed (Minimum weight 15mm-90gms) complete all as specified and directed. |
| 84 | Supply and fixing in repairs Brass Chromium Plated Tubular Towel Rail, 20mm dia, D Type, 600 mm long between flanges complete all as specified and as directed. |
| 85 | Supply and fixing in repairs Soap dish, any type of approx size 160x160x90mm,fixed to plugs with chromium plated brass screws complete all as specified and as directed. |
| 86 | M&L for cutting chases, pinning in, making good to facing where required and pointing in cement mortar 1:3 tro ends or edges of landings, steps, cills, sunshades, shelves, lintels etc and cutting chases for concealed water tubing or concealed conduit wiring etc and making good, cutting not exc. 10 cm girth complete all as specified and directed. Note: Cutting of holes will be carried out by using mechanical means like Groove cutter/ wall chaser. |
| 87 | Demolition and breaking up 100 mm dia internal dia bore drain pipes (Salt glazed ware, AC or Reinforced concrete) set in cement mortar complete all as specified and directed. |
| 88 | M & L for 150 mm dia RCC Pipes, Class NP 2, laid and jointed with collars laid in trenches and jointed complete all as specified and as directed. |
| 89 | M & L for concrete bed to drain pipes of size 150 mm bore packing under and haunching against the sides of pipes after they are laid and fitted in cement concrete, Type D2, 1:4:8, using 40mm graded stone aggregate complete all as specified and as directed. |
| 90 | Supply and fixing in repairs 75 mm bore dia PVC (SWR) pipes single socketed, in any length with rubber ring loints, fixed to walls complete all as specified and directed. |
| 91 | Supply and fixing in repairs 110 mm bore dia PVC (SWR) pipes single socketed, in any length with rubber ring loints, fixed to walls complete all as specified and directed. |
| 92 | Supply and fixing in repairs 110mm bore PVC [SWR] pipes single socketed, in any length with rubber ring joints, laid in trenches or infloors complete all as specified and as directed. |
| 93 | Supply and fixing in repairs 75mm bore PVC [SWR] pipes single socketed, in any length with rubber ring joints, laid in trenches or infloors complete all as specified and as directed. |
| 94 | S & F 75 mm bore PVC [SWR] Bends of any radius including jointing with solvent cement complete all as specified and as directed. |
| 95 | S & F 110 mm bore PVC [SWR] Bends of any radius with access door including jointing with solvent cement complete all as specified and as directed. |
| 96 | Supply and fixing 110 mm bore PVC [SWR] Branch Piece, Single [Single "Y"] equal or unequal with access door including jointing with solvent cement complete all as specified and as directed. |
| 97 | Supply and fixing 75 mm bore PVC [SWR] Branch Piece, Single [Single "Y"] equal or unequal with access door including jointing with solvent cement complete all as specified and as directed. |
| 98 | Supply and fixing 110 mm bore PVC [SWR] Branch Piece, Single [Single "T"] equal or unequal with access door including jointing with solvent cement complete all as specified and as directed. |
| 99 | Supply and fixing 75 mm bore PVC [SWR] Branch Piece, Single [Single "T"] equal or unequal with access door including jointing with solvent cement complete all as specified and as directed. |
| 100 | Supply and fixing 110 mm bore PVC (SWR) vent cowlincluding jointing with solvent cement complete all as specified and as directed. |
| 101 | Supply and fixing 75 mm bore PVC (SWR) vent cowlincluding jointing with solvent cement complete all as specified and as directed. |
| 102 | Roughening surfaces of old concrete floor by picking, sweeping clean & washing down with water to remove dust etc complete all as specified and as directed. |
| 103 | Material and labour for 15mm thick rendering in CM (1:3) on sides and bottom of sunken floor surfaces, mixed with integral water proofing compound @ 3% by wt of cement,finished the surface even and fair complete all as specified and directed. (Note:Water proofing compound shall be measured & paid separately) |
| 104 | Material and labour for 25mm thick PCC (1:2:4) type B0 (using 12.50mm graded stone aggregate) as sunken floor and M & L for preparing surfaces of sunken floor and applying a coat of Brush Bond of M/s Fosroc Chemicals or equivalent approved water proofing coating as per manufacturer"s instructions, finished even and rough to receive the top layer complete all as specified and as directed. |
| 105 | Material and labour for PCC (1:4:8) type B1 (using 20mm graded stone aggregate) mixed with water proofing compound @ 3% weight of cement as in concrete padding, laid in required slopes, finished the surface even and smooth complete all as specified and as directed. |
| 106 | Supply and fixing GI spouts 40mm dia projecting at least 25 cm clear from the wall for connecting inlet, outlet, over flow and washout pipes complete all as specified. complete all as specified and as directed. |
| 107 | M & L for one coat of hot bitumen of industrial grade 85/25 conforming to IS: 702 @ of 1.7 Kg/ Sqm over vertical surfaces or sunken including necessary preparation of surfaces complete all as specified and as directed. |
| 108 | Material and labour for PCC (1:7:12) type F2 (using 40mm graded stone aggregate) as in sunken slab complete all as specified and as directed. |
| 109 | S & F in repairs Stainless steel kitchen sink with drainage board, made of stainless steel sheet of 1 mm thick, with plugs, washers, Waste Fittings, 32 mm dia, Brass, Chromium plated,and 32mm dia PVC flexible Waste Pipe, 750 mm long, including bedding in Cement Mortar to dwarf wall or including fixing cantilever CI Brackets and connecting union to waste pipe, over all size 915 mm x 460 mm bowl size 410 mm x 355 mm x 165 mm complete all as specified and as directed. |
| 110 | Fixing only in repairs Stainless steel kitchen sink with drainage board with plugs, washers, Waste Fittings including bedding in Cement Mortar to dwarf wall or including fixing cantilever CI Brackets and connecting union to waste pipe complete all as specified and as directed. |
| 111 | Supply and Fixing in repairs of Stainless Steel wall mounted modular Kitchen Plate Rack of size 750mmx900mmx250mm, rectangular shape, glossy finish, having 5 shelves, made of stainless steel 0.6mm thick complete all as specified and as directed |
| 112 | Fixing only in repairs of Stainless Steel Kitchen Plate Rack of any size complete all as directed. Note: The cost of screws/ required assessories shall be deemed to included in unit quoted rate. |
| 113 | Supply and fixing in repair 75 mm dia PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified and as directed. |
| 114 | S & F in repairs Salt Glazed Stoneware Gully Trap, Square 150x150mm size including jointing and set in cement mortar complete all as specified and as directed. |
| 115 | Supply and fixing in repair Rotational Moulded Polythene [HDPE] triple layered Water Tanks, ISI Marked, Cylindrical & Vertical Type 500 Litres Capacity hoisted and fixed in position complete all as specified and as directed. |
| 116 | Disconnecting existing tanks, setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position. and cleaning and removing all scales, dirt, deposited sediments from HDPE Tank of capacity exceeding 250 Litres but not exceeding 500 litres, from mouths of circulating pipes of water tanks using wire brushes and other means and washing internal surfaces, cleaning with fresh water mixed with bleaching powder including draining of water through drain pipe line complete all as specified and as directed. |
| 117 | S & F 160mm bore PVC [SWR] pipes single socketed, in any length with rubber ring joints, fixed to walls/ laid in trenches including necessary brackets, clamps as in rain water down pipes complete all as specified and as directed. |
| 118 | Demolition of Reinforced Cement Concrete [reinforcement cut as required to facilitate demolition] of any description and in any position not otherwise specifically provided complete all as specified and as directed. |
| 119 | Material and labourfor reinforced cement concrete (1:2:4) type B-1 using 20mm graded aggregate (nominal mix)for slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves, chajjas complete all as specified and directed. |
| 120 | Material and labour for mild steel TMT bars of 10mm dia and over, cut to length, bent to shape required including cranking, bending, spirally for hooping, hooking ends and binding with annealed mild steel wire not less than 0.9mm dia or securing with clips or welded complete all as specified and as directed. |
| 121 | Material and labour for mild steel TMT bars 8mm dia and over, cut to length bent to shape required, including cranking bending spirally for hooping for columns , hooking ends and binding with and including mild steel wire (annealed) not less than 0.90mm dia or securing with clips complete all as specified and as directed. |
| 122 | Material and labour for 25mm thick PCC (1:3:6) type B1 (using 20mm graded stone aggregate) as roof covering finished even and rough to receive the top layer complete all as specified and as directed. |
| 123 | Material and labour for use and waste of form work tochullah hoods, chajjas, troughs and similar items including edges fair finished surfaces complete all as specified and as directed. |
| 124 | Material and labour for 10mm thick rendering in CM (1:3) on RCC chajja, mixed with integral water proofing compound @ 3% by wt of cement,finished the surface even and smooth complete all as specified and directed. (Note:Water proofing compound shall be measured & paid separately) |
| 125 | M & L for Making good under cills [or over arches, lintels and bressummers] including all pinning as necessary complete built in Cement Mortar 1:4 complete all as specified and directed. |
| 126 | M & L for Forming jambs etc to openings, including cutting, toothing and properly bonding in to old work including facing and pointing [if necessary] to match existing work, complete built in Cement Mortar 1:4 complete all as specified and directed. |
| 127 | Supply and fixing 5.5mm thick sheet Glass ordinary quality and fixed with aluminium beading and gasket suitable for aluminium frame in squares not exceeding 0.5 Sq.m in each pane complete all as specified and as directed. |
| 128 | Supply and fixing 5.5mm thick sheet Glass ordinary quality and fixed with aluminium beading and gasket suitable for aluminium frame in squares exceeding 0.5 Sq.m in each pane complete all as specified and as directed. |
| 129 | Taking down copper/ aluminium point wiring (light, fan, socket or power) complete, (including unscrewing from boards/out-let boxes, fittings and fixtures such as switches, sockets, ceiling roses, lamp holders, brackets, ceiling fittings, bulk head fittings, tube light fittings and regulators, etc.), removing materials off the site of work and making good disturbed surfaces of walls, floors, etc.all as directed. |
| 130 | Material and labour forpoint wiring complete as specified with 1100 volt grade 1.5 sqmm (Nominal area) single core PC insulated unsheathed cable multi stranded copper conductor drawn through and including rigid non metalic PVC casing caping it of suitable size but not less than 20mm/25mm, with all fitting on wall/roof/floor including decorative modular cover plates (inner and outer) suitable for housing modular pattern switches/sockets/regulators etc. along with necessary metal boxes flush mounting in the wall duly earthed with same cable as for wiring above but green in colour as continuous earthing wire complete all as specified and as directed. (i)Cost of cutting of wall, if any, for housing of GI box, ceiling rose, etc and also making good the disturbed surfaces are deemed to be included in unit rate. (ii) Cost of GI box of suitable size shall be deemed to be included in the qouted rate. |
| 131 | .-Ditto- all as per item No 129.00 here-in-before butfor 3 pin 6 amps switch socket outlet on the independant boardwith 1.5 Sqmm cable and -ditto-. |
| 132 | .-Ditto- all as per item No 129.00 here-in-before butfor 3 pin 6 amps switch socket outlet on the same board with 1.5 Sqmm cable and -ditto-. |
| 133 | .-Ditto- all as per item No 129.00 here-in-before butfor one 3 pin 15 Amps socket outlet on independent boardwith 2.5 sqmmPVC (FR-LSH) insulated un-sheathed copper conductor cable multistranded conductor 1100 volts grade and 2.5 Sqmm PVC (FR-LSH) copper conductor cable as earth continuity conductor. |
| 134 | Supply and fixing modular switch, 1 way, 6 A, 1 module complete all as specified and as directed. |
| 135 | Supply and fixing modular socket,6 A, 2/3 pin, 2 module complete all as specified and as directed. |
| 136 | Supply and fixing modular socket,16 A, 2/3 pin combined, 2 module complete all as specified and as directed. |
| 137 | Supply and fixing ceiling rose, PVC/polycarbonate, isolated body surface bakelite, 65mm x 50mm,ISI marked three terminals complete all as specified & directed. |
| 138 | Supply and fixing modular switch, 1 way, 16 A, 1 module complete all as specified and as directed. |
| 139 | Supply and fixingBell Push, Modular Type, One Module, Single Pole, One Way, 6 Amps, 230 Volts complete all as specified and as directed. |
| 140 | Supply and fixing Bell, Ding Dong, AC, 230 Volts, Single Pole complete all as specified and as directed. |
| 141 | Supply and fixing modular fan regulator 120 watt step type AC 220 Volt complete all as specified and as directed. |
| 142 | Supply and fixing of MCB DB SPN 8 ways double door including bus bar of rating 200 Amps, neutral link, earth bar and din rail,recessed with wall surfaces by chase cutting and making good surfaces of wall including taking down of existing unserviceable DB complete all as specified and as directed. |
| 143 | Supply and fixing of MCCB DB VTPN four way double door, for incomming MCCB and outgoing MCBs), 415 Volts, powder paintedincluding bus bar of rating 200 Amps, neutral link, earth bar and din rail,recessed with wall surfaces by chase cutting and making good surfaces of wall including taking down of existing unserviceable DB complete all as specified and as directed. |
| 144 | Supply and fixingMCCB, four pole, 415 volts, Adjustable type, 100 Amps with breaking capacity 16 KAcomplete all as specified and as directed. |
| 145 | Supply and fixing of MCB 40 Amps, SPN, 240 Volt "C" series, breaking capacity 10 KA complete all as specified and as directed. |
| 146 | Supply and fixing of MCB 6 to 32 Amps, SP, 240 Volt "C" series, breaking capacity 10 KA complete all as specified and as directed. Note for serial Item No. 141 to 145: MCB, MCCB and MCB DB shall be of same make as approved by GE. |
| 147 | S & F in repairs Surface & wall mounted Energy efficient LED Tube Light Fitting, of not less than 20 W, 5700 K of cool white, with extruded aluminium / CRCA housing and robust construction with necessary acrylic diffuser & integrated electronic driver, all accessories internally prewired and connecting up with twin core PVC insulated, sheathed flexible copper conductor cable of size 1.5 Sq.mm and making good the disturbed surfaces to match with existing complete all as specified and as directed. Note: Light fitting shall be of PF>0.95 |
| 148 | Taking down ceiling fan carefully of any size from its original position, kept in safe custody and refixing the fan in same position or at new place after cleaning preparation of oldsurface applying one coats of synthetic enamel paintcomplete all as specified and directed. |
| 149 | Taking down exhaust fan carefully of any size from its original position, kept in safe custody and refixing the fan in same position or at new place after preparation cleaning of oldsurface applying one coats of synthetic enamel paintcomplete all as specified and directed. |
| 150 | Supply & Fixing Energy efficient & Long life Building Security Light Luminaire, of 20 watt, 6500 K with Pressure Die Cast Aluminium Housing, IP66 protection, heat resistant glass cover, high power LEDs as light source, electronic driver including GI Bracket made out of 25 mm bore GI Tube, Medium Grade of size not exceeding 1.20 m in length and bent to shape required and fixed including drilling in wall of required hole with 2 Nos of wall fitting Clamps made out of MS Flat of size 50 X 6mm, bolts, nuts, washers and painting with two coats of aluminium paint over a coat of primer red oxide zinc chrome primer and connecting up with three core PVC insulated, sheathed flexible copper conductor cable of size 1.5 Sq.mm complete all as specified and as directed. Note: Light fitting shall be of PF>0.95 |
| 151 | M & L for surface sub main wiringwith two single core PVC insulated unsheathed 1100 volt grade multi stranded FRLSH Copper conductor cable of size 6.0 sqmm (Nominal area) drawn through in and including PVCCasing/ Caping with all fittings and accessories alongwith one single core green colour PVC insulated unsheathed 1100 volt grade multi stranded FRLSH Copper conductor cable of size 6.0 sqmm as earth lead and connected to earth dolly and making good to disturbed surfaces inculdingtaking down the old unserviceable one all as specified as directed. Note : (i) 3 Runs of 6.00 Sqmm cable and one run of PVC Casing/ Caping shall be measured as one unit length. (ii) The cost of making good the disturbed surfaces is deemed to be included in the quoted rate. |
| 152 | Excavating in trenches, n exc 1.5 m wide or n exc 10 sq m on plan and n exc 1.5 m in depth for laying of cable etc. and getting out in soft and loose soil complete all as specified and as directed. |
| 153 | Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm in Soft/loose soil complete all as specified and as directed. |
| 154 | Removing excavated materials not exceeding 50m and depositing where directed at a level not exceeding 1.5m above the starting point complete all as specified and as directed. |
| 155 | Supply and laying XLPE insulated PVC sheathed (Heavy duty) armoured 1100 volts grade aluminium conductor cable of size 25 Sqmm 4 core laid in trenches or fixed to wall / pole / ceiling as per IS 7098 (Part I) including connection cable glands, aluminium lugs etc including taking down of existing unserviceable cable complete all as specified and as directed. Note : Earth work, brick protection and sand cushioning and GI Pipe will be measured and paid separately under respective item. |
| 156 | Supply and laying 40 mm bore dia GI tubing, light grade with all fittings under trenchesfor passing of cable or fixed to wall by necessary clamps / nuts / bolts etc as requiredincluding taking down of existing GI tubing complete all as specified and as directed |
| 157 | Materials and labour for sand filling around the cable with approved quality coarse sand for sand cushioning of Under ground cableincludingspreading and punning down to desired thickness complete all as specified and as directed.(Note: Punned thickness shall be measured for payment purpose) |
| 158 | Materials and labour for brick protection cover to underground cables with sub class ‘B’ over burnt brick of size 23 X 11.5 X 7.5 cm, (locally available best quality), laid dry and flat abutting each other with gaps not exceeding 10mm complete all as specified and as directed. |
| 159 | Materials and labour for earthing complete with galvanised iron earth plate electrode 600 mm x 600 mm x 6 mm thick, burried directly and preferably vertically in ground, earth pit not less than 2.25 Mtr deep below ground level with top edge of the plate not less than 1.5 m below ground level connetced with galvanised wire of 4mm diaby means of nuts, bolts, check nuts and washers made of galvanised iron or steel earthing lead to be protected by galvanised iron pipe of 15mm bore (light grade) and other end connected to earthing test point or lightening arrestor or main controlling switch as directed including providing funnel with 20mm bore galvanised iron pipe (medium grade), wire mesh, charcoal or coke and common salt in alternate layer of 15cm (compacted thickness) all round the earth electrode, concrete earth pit in PCC (1:3:6) type C-1 (with 20mm graded aggregate), 50mm thick precast RCC (1:2:4) cover slab (re-inforced with 8mm dia TMT bar @ 15 cm C/C bothways and suitable handle made of 10mm dia) including necessary earth work in excavation, returning filling and removal of surplus earth upto a distance not exceeding 50 m etc all as shown on electrical plate No. 3 of MES Schedule Part-I(2009) complete including testing on completion including taking down old unserviciable earthing set all as specified and as directed. Notes:- (i) Main earthing galvanised wire from earth plate electrode to rest point upto length of 7.5 meters length shall deemed to be included in the unit rate quoted against this item. (ii) On testing after completion if the desired resistenance is not obtained the contractor shall redo the earthing without any extra cost to the department. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
