Sales : +91-777 804 8217
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 28-05-2024 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 04-06-2024 |
| 2 | 20-05-2024 | CORRIGENDUM NO 03 | BOQ | 28-05-2024 |
| 3 | 16-05-2024 | CORRIGENDUM NO 02 | Date | 28-05-2024 |
| 4 | 09-05-2024 | CORRIGENDUM NO 01 | Date | 21-05-2024 |
| Sl. No. | Item Description |
| 1 | Excavating loose/soft soil over areas, n exc 1.5 m deep and getting out all as specified and as directed by Engineer-in-charge |
| 2 | Removing excavated material n exc. 250m and depositing where directed at a level n exc. 1.5 m above the starting point as specified and directed |
| 3 | Demolition of cement Concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) all as specified and as directed |
| 4 | M&L for 25mm thick Cement concrete type B- 1, 1:2:4 (20mm graded aggregate) as in floors all as specified and as directed by Engineer-in-charge |
| 5 | Taking down cement plasterincluding raking out joints, hacking for key,scrubbing down with water built in cement mortar complete all as specified and as directed. |
| 6 | M & L for rendering 15 mm thick in CM 1:4 on fair faces of brick work or concrete surfaces finished fair and even without using extra cement. |
| 7 | M&L for preparing surfaces plastered or unplasted surface of wall by applying two coat of cement base paint over a coat of cement primerall as specified and directed |
| 8 | M & L for rendering 15 mm thick in CM 1:6 on fair faces of brick work or concrete surfaces finished fair and even without using extra cement. |
| 9 | M & L for preparation of newly plastered surface ofwalls and applying two coats of oil bound distemper(white or tinted) over a coat of chalk whiting primer and putty complete all as specified and as directed by Engr-in-Charge. |
| 10 | Material and Labour for Keyed pointing to brick walls in cement mortar 1:4 complete all as specified and as directed by Engineer-in-charge |
| 11 | Dismantling wall and ceiling board, fibre, pulp insulation etc or insulation boards any thickness including cover fillets complete all as specified and as direced by the Engr-in-Charge |
| 12 | Demolition of brick work or stone/boulder masonry built in cement mortar or cement limemortar including all quoins, arches, pillars etc but excluding ashlar facing dressed stone work and precast concrete articles all as spd and directed |
| 13 | M&L for brickwork with subclass \"B\" size bricks, straight or curved on plan exc 6 cm mean radius , built in cement mortar 1:6 |
| 14 | Dismanteling Asbestos cement (corrugated, semicorrugated, etc.) sheets in roof coverings as specified |
| 15 | Supply and fixing Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm of an colour having tensile strength of 550Mpa with powder coating 150gm/Sqm as in roof covering/cladding to wall, fixed with self tapping screws as specified |
| 16 | Supply and fixing Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm of an colour having tensile strength of 550Mpa with powder coating 150gm/Sqm as in roof covering/cladding to wall, fixed with self tapping screws as specified |
| 17 | Dismantling wrought iron or mild steel work of any description not otherwise provided for all as specified and as dirceted by Engineer-in-charge |
| 18 | Fabrication onlyTrussed (framed), trussed, purlins, crane gantries, rails and fasteningsand heavy bracket framing (Beam, tee, angle, channel or flat sections) includingdistance pieces, cleats etc confirming to FE 410-W (Gde E-250) quality. |
| 19 | S&FTrussed (framed), trussed, purlins, crane gantries, rails and fasteningsand heavy bracket framing (Beam, tee, angle, channel or flat sections) includingdistance pieces, cleats etc confirming to FE 410-W (Gde E-250) quality. |
| 20 | M&L for preparation of new steel surfaces & applying two coat of synthetic enamelpaintover a coat of red oxide. |
| 21 | M&L for preparation of old steel surfaces & applying one coat of synthetic enamelpaintover a coat of red oxide. |
| 22 | Demolition of floor hearth or wall tiling including cement mortar bedding (not backing) removing serviceable tiles to store and rubbish of the premises |
| 23 | Material and labour for vitrified ceramic tiles 10mm thick, light shade, polished area of each tiles n. exc 0.36 Sqm(square / rectangular) in floor etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles with & including screed bed 15mm thick in cement mortar (1:6) finished rough to fix tiles complete all as specified and directed. |
| 24 | M&L for vitrified ceramic tiles 10mm thick, light shade, polished area of each tiles n. exc 0.36 Sqm(square / rectangular)as in vertical surfaces i.e. skirting/dado set and jointed in neat cement slurry and pointed in white or coloured cement to match the existing surface with & including rendering 10mm thick in cement mortar (1:4) finished rough to fix tiles complete all as specified and directed. |
| 25 | M&L for non-skid ceramic colouredtiles 7 to 8mm thickarea of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm in floors set and jointed in neat cement slurry and pointed in white or colored cement to match over and incl 20mm thick bedding layer CM 1:6complete all as specified. (Colour and shade as approved by Engr-In-Charge) |
| 26 | M&L for coloredglazed tiles of size 450x350x7 mm thick in dados/wall set and jointed in neat cement slurry and pointed in white or colour cement to match including 10 mm thick rendering in CM 1:4 complete all as specified and directed. (Colour and shade as approved by Engr-In-Charge) |
| 27 | Material and labour for Chequered cement concrete tiles in grey cement with pigment, 20cm x 20cm x 25mm thick, set, jointed and pointed in neat cement slurry in floors laid over 20mm screed bed in CM 1:6 all as specified and as directed by Engineer-in-charge |
| 28 | M&L forProviding cement concrete type B0 1:2:4 (using 12.5mm graded aggregate) in roof kerbs or mud stops, rounded or chamfered on edges complete all as specified and directed. |
| 29 | M&L for 125x 60 mm pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete, as specified, supplied and fixed complete all as specified and directed. |
| 30 | S&F steel window 1.25mm thick box type (primer coated) ERW hollow P section of size 60x25mmsingle rebated comprises gauged skelton shutter ERW sec 50x20mm and 1mm thick with two open able leaf consisting two Nos sash bars of T section 20x3mm completed welded to frame with one vertical mullion of ERW box type T section of size 60x25mm and 1.25mm thick incl cutting holes and making good dismantled portion PCC 1:2:4 type B1 four Nos for each window incl following fittings weld to frame shutter (a) hold fast, 150mm long of 12mmx3mm made to shape-04 Nos per window (b) handle of Z section 20x25mm, 100mm long 01 Nos per leaf (c) MS Tower bolt 150mm long of 12x3mm made to shape-04 Nos per window (b) handle of Z section 20x25mm, 100 long stoper-01 No per leaf () MS pintal of hinges of size 75mmx12mm-02 Nos per leaf (g) fabrication & fixing arrangement as per Drg No. CEJZ/TD-06-07 , Note : wire mesh and painting shall be measured and paid separately under appropriate item. |
| 31 | ditto above but as in glazed windows.Note : wire mesh and painting shall be measured and paid separately under appropriate item. |
| 32 | Supply and fixing mild steel framed work for such as guard bars/ grills, grating etc with end of bars shouldered and/ or riveted forged into spikes, framed guard bars barred iron door, railings and similar work complete conforming to Fe-290 Gde E 165 including one shop coat of zinc chromate primer complete all as specified & directed. |
| 33 | M&L for sheet glass 3mm thick ordinary quality and glazing with oil putty or wooden beads not exceeding 0.5 Sqm in each pane. |
| 34 | S&F galvanized mild steel wire cloth 0.56 mm nominal dia and average width of aperture 1.18 mm and fixed with tinned tacks. |
| 35 | Taking down chowkhats or frame with shutter without taking off shutter from the frames exc 1.5 Sqm but n exc 4.00 sameach all as specified. |
| 36 | S&F glazed and skelton shutters 35mm thick open rebatedand prepared to receive glass,gauge etc (without sash bars) edging of framing plain, chamfered or rounded with cut and mitred beads for securing glass etc. sizes of members of shutters as specified in SSR Pt-I, Section 8, Clause 8.24(a). |
| 37 | S&F 30 mm thick flush shutter, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed. |
| 38 | Supply & Fixing 100mm size butt hinges extruded aluminum alloy with galvanised mild steel hinge plate complete all as specified. |
| 39 | S&F Aluminum anodized barrel tower boltof extruded section of size 150mm complete all as specified. |
| 40 | S&Fextruded Aluminum alloy handle fabricated of size 150mm all as specified and directed |
| 41 | S&F 250 mm long Mild steel sliding door bolts, plate type, stove enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed complete all as specified. |
| 42 | S&F 150mm longMild steel barrel tower bolts, stove enamelled black, with bright bolt and fixed complete all as specified and directed. |
| 43 | Mild steel Helical door spring 300mm long including roller plate, complete all as specified and directed. |
| 44 | Demolition of reinforced cement concrete of any description and in any position complete all as specified and directed. |
| 45 | M&L for RCC B0 1:2:4 (12.5mm graded stone aggregate) in Beams, cantilevers, bressummers, lintels over 1.5m span all as complete as directd by Engineer-in-charge |
| 46 | M&L for RCC B0 1:2:4 (12.5mm graded stone aggregate) in Chajjas all as complete as directd by Engineer-in-charge |
| 47 | M&L for Plain Cement Concrete Type B1 1:2:4 (using 20 mm gradedstone aggregate) cast in situ inkerbs or mud stops, rounded or chamfered on edges of paving blocks as directed including use and waste of form work. |
| 48 | M&L for PCC Type B0-1:2:4 using 12.5mm graded aggregate as in filling of pressed steel frame, hold fasts and similars articles |
| 49 | M&L Hardcore (broken stone/ boulders) of guage exc 63mm but n exc. 100 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rolled/rammed to a true surface |
| 50 | M&L for 75 mm thick cement concrete (1:3:6) type C-2, using 40mm graded crushed stone aggregate as in plinth protection, path and floor complete all as specified and as directed. |
| 51 | M&L sand cushioning to under concrete interlocking paver block including watering & consolidation complete all as specified and directed |
| 52 | M&L 60 mm thick machine pressed precast concrete interlocking paver block any shape & size confirming to IS-15658-2006 of 60mm thickness, M-35 grade with grey cement & pigment |
| 53 | S&Fvitreous china wash down water coset pan pedestal pattern white incl fixing bolts incllow level PVC flushing cistern10litre capacity syphonic action typewith all fitiing completeand flush pipe etc complete all as specified and directed. |
| 54 | S&F toilet paper holder CP fixed to walls complete all as specified. |
| 55 | S&F Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including makingconnections and fixed in position complete in all respect as specified |
| 56 | S&F Vitreous china wash hand basin (Oval shape) under counter type bowl type including waste coupling and pipe all as specifed and directed. Make: Cera/Hindware |
| 57 | S&F in repairs Hot and cold basin mixer fancy typesingle ordoublelegged cast copper alloy screwed down high pressure with crutch or butterfly handlescrewed both ends iron pipe suitable for 15mm bore pipe fixed to wash hand basin complete all as specified. Make: Prayag/Cera/Marc |
| 58 | S&F in repair 15mm angular stop valves, fancy type chromium plated, with long shank and cup(concealed) screwed down, high pressure with crutch or butter fly handlescrewed both endsforiron pipe or for unionsand fixed . Make: Prayag/Cera/Marc |
| 59 | S&F in repairBib tap fancy type (Long body)cast copper alloy suitable for 15mm bore iron pipe with long body fancy type complete fixed in repairs . Make: Prayag/Cera/Marc |
| 60 | S&F PVC valve less symphonic action type flushing cistern, low level white with inlet ball valve float and handle with flush pipe 10 Ltrcapacity complete allas specified fixed in repairs. Make: Prayag/Hindware/Cera |
| 61 | S&F connection pipe braided with wires (reinforced) 45cm long with brass check nut and PVC washers at both ends complete all as specified and directed. |
| 62 | Supply and fixing in repairs vitreous china bowl urinal, half stall, white complete including providing and fixing plugs, bedding urinal against wall in cement mortar (1:2) securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement, etc all as specified and directed. |
| 63 | Demolition and breaking up drain pipesAC/PVC pipe in event n.exc 150 mm dia including all fittings. |
| 64 | S&F for 110 mm PVC (SWR)Rain water pipessingle socketedin any length with rubber ring joints fixed towalls all as specified and directed |
| 65 | S&F 110mm bore PVC (SWR) bends in any radius complete all as specified and directed. |
| 66 | S&F PVC (SWR) junction single (single tee)equal or unequal, dia of pipe 110 mm completeall as specified and directed. |
| 67 | S & F 75 mm bore PVC (SWR) pipe of pressure rating 4kgf/cm2 single socketed in any length with rubber ring joints jointing with adhesive fixed in repair to wall/laid in trenches complete all as specified and directed. |
| 68 | S&F 75 mm bore PVC (SWR) bends in any radius complete all as specified and directed. |
| 69 | S&F PVC (SWR) junction single (single tee)equal or unequal, dia of pipe 75 mm completeall as specified and directed. |
| 70 | S&F 75mm dia PVC (SWR) floor trap with grating including joining to waste pipe fixed in solvent cementincl taking down damaged floor trap in any positioncomplete all as specified and directed. |
| 71 | Taking up or down existing steel 15 mm tubing and connections including cleaning for refixing or removal to store complete all as specified and as directed |
| 72 | Taking up or down existing steel 20 mm tubing and connections including cleaning for refixing or removal to store complete all as specified and as directed |
| 73 | Supplying, fixing, 15 mm jointing and testing galvanised iron tubing medium grade with all fitting such as bends, elbow, socket, reducer etc and fixed to wall or laid in floor complete all as specified and as directed . |
| 74 | Supplying, fixing, 20 mm jointing and testing galvanised iron tubing medium grade with all fitting such as bends, elbow, socket, reducer etc and fixed to wall or laid in floor complete all as specified and as directed |
| 75 | S&F looking mirrorsize 600mmx450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified and as directed by Engr-in-charge |
| 76 | M&L for 25 mmthick granite machine cut as in window cills, cooking platform bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone laid over bedding layer or screed 15 mm thick in cement mortar 1:4 including cutting , grinding, rounding edges, rubbing and polishing complete all as complete all as specified and directed by Engr-in-Charge. |
| 77 | M&L for Roughening surfaces of old concrete floor by wire brushing, picking, sweeping cleanand washing down with water to remove dust, etc. |
| 78 | M&L for Brushing neat cement slurry with 3.0 kg of cement per sq. metre over cleaned concrete surfaces all as specified and directed |
| 79 | M&L for P.C.C 1:2:4 type B-0 using 12.5 mm graded stone aggregate as in padding over roof finished and laid to required slope complete all as specified and as directed. |
| 80 | M&L, for cement concrete 1:2:4 type B-0 using 12.5mm graded stone aggregate as in coping of parapets and or roof kerbs on roof chamfered on edge incl troweling slightly complete all as specified and directed. |
| 81 | M&L for 10 mm thick rendering in cement mortar 1:4 on concrete surfaces when concrete is stillgreen finished even and fair including mixing ofwater proofing compound as per manufacturer instructionetc complete all as specified and as directed. Note :- Water proofing compound shall be measured separately. |
| 82 | Supply only Liquid water proofing compound complete all as specified and as directed of as per manufacturer instruction. |
| 83 | Providing and applying liquid Polyurea-PU based hybrid elastomeric water proofing membrane at existing/newly constructed roofs, RCC structure like basement raft, retaining wall, water retaining structure, tunnels/subways and bridge deck etc. in two or more coats.The product must have pot life of >90 mins., tensile strength > 12.6 Mpa, elongation of > 500% conforming to ASTM D 2370 & puncture resistance of >200 N as per ASTM E 154 with min. consumption of 1.5 Kg per sqm for 1.2mm DFT in two- three coats.The surface needs to be primed with water soluble self impregnated epoxy primer in two coats to be applied @ 200-250 gms/sqm/coat prior to Polyurea -PU application.Furthermor, (in case the substrate is not suitable) 15mm plaster is advisable for surface prepration before application of the water proofing membrane to avoid pinholes or functional difficulties of the system (Make - Asian Paints, BASF & SIKA) Note:- The application shall be done by the authorised applicator of the manufacture with a letter of proof stating the authenticity of the applicator firm. |
| 84 | Material and labour for B0, 1:2:4 type Cement concrete (12.5mm graded aggregate)in surface channels and drains complete all as specified and as directed |
| 85 | Providing & fixing false ceiling at all heights with GRG (Glass Fibre Reinforced Gypsum) false ceiling tiles of Size 595 x 595 mm of approved texture, design and patterns having moisture content less than 2%, humidity resistance of 99%, NRC0.50 to 0.75 as per IS 8225:1987, Noncombustible as per BS 4 76 (part 4 )-1970 and light reflectance of 85% (minimum) to be laid in true horizontal level suspended on interlocking metal T-Grid of hot dipped galvanized iron section of 0.33mm thick (galvanized @ 120 grams per sqm including both sides) comprising of main-T runners of size 15 x 32 mm of length 3000mm,cross-T of size 15x 32mm of length 1200mm and secondary intermediate cross-T of size 15 x 32 mm of length 600mm to form grid module of size 600x 600mm, suspended from ceiling using galvanized mild steel items (galvanizing @ 80 grams per sqm) i.e 50mm long, 8mm outer diameter M-6 dash fasteners, 6mm dia fully threaded hanger rod upto 1 OOOmm length and Lshape level adjuster of size 85x25x2mm. Galvanised iron perimeter wall angle of size 24x 24x0.40mm of length 3000 mm to be fixed on periphery wall I partition with the help of plastic rawl plugs at 450 mm center to center and 40mm long dry wall wood screws. The work shall be carried out as per specifications, drawing and as per directions of the Engineer-in-Charge. |
| 86 | S&F 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive offixing on to wall to make PVC Frame as per specification and drawing. |
| 87 | S&F Solid PVC Wall Lining consisting of 5mm thick Plain colour PVC sheetinclusive of solvent cement and fixing at site on PVC frame as per specifications and drawing . |
| 88 | Material and labour in repairs for 12mm Perforated particle board/ tiles for insulation and accoustic purposes, 60x60 cm in size,to match with existing tiles fixed with nails to timber framework or with staples on snap grid all as specified and as directed by Engr-in-charge |
| 89 | Dismanteling Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillets |
| 90 | S & F for4 mm thick of size 600x600mmHSPC (high pressure Steam Cured) pre-primetered self embossed, textured designer boardE-Board Classic to be fixed GI powder coated grid/section size 600mmx600mm with main runner 38x24x0.9mm thick ,cross tee 28.6x24x0.9 mm and wall angle 19x19x0.9 mmduly suspended with 4mm dia GI bar hangers 1200mm centre to centre both ways fixed with steel dash fasteners or from purlin from the roof with alignment clip including providing provisions for light fixtures of any size complete all as specified and as directed by the Engr-in-Charge. Model- Lake & Hill ofEverest |
| 91 | Dismanteling Asbestos cement (corrugated, semicorrugated, etc.) sheets in roof coverings as specified |
| 92 | Supply and fixing Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm of an colour having tensile strength of 550Mpa with powder coating @ 150gm/sqm as in roof covering/cladding to wall, fixed with self tapping screws as specified |
| 93 | Supply and fixing Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa with powder coating @ 150gm/sqm as in roof covering/cladding to wall, fixed with self tapping screws as specified and as directed |
| 94 | Dismantling wrought iron or mild steel work of any description not otherwise provided for all as specified and as directed |
| 95 | Supply and fixing Trussed (framed), trussed, purlins, crane gantries, rails and fasteningsand heavy bracket framing (Beam, tee, angle, channel or flat sections) includingdistance pieces, cleats etc confirming to FE 410-W (Gde E-250) quality. |
| 96 | M&L for prepration of old steel surfaces of any description not otherwise described over 10 cm width or grith and applying one coat of synthetic enamel paint over red oxide primer complete all as specified and directed by Engr-in-charge. |
| 97 | Demolition of brick work or stone/boulder masonry built in cement mortar or cement limemortar including all quoins, arches, pillars etc but excluding ashlar facing dressed stone work and precast concrete articles all as spd and directed |
| 98 | M&L for brickwork with subclass \"B\" size bricks, straight or curved on plan exc 6 cm mean radius , built in cement mortar 1:6 |
| 99 | Taking down cement plaster of any description on brick or stone masonary, including raking out joints, hacking for key, scrubbing down with water etc. complete all as specified and directed. |
| 100 | M & L for rendering 15 mm thick in CM 1:4 on fair faces of brick work or concrete surfaces finished fair and even without using extra cement. |
| 101 | M&L for preparing surfaces plastered or unplasted surface of wall by applying two coat of cement base paint over a coat of primerall as specified and directed |
| 102 | Complete removal of existing treatment on wall and Material and labour for preparation of old plastered surfaces on walls and applying two coats of cement base paintover a coat of cement primer complete all as specified. and as directed by Engineer-in-Charge. |
| 103 | M & L for rendering 15 mm thick in CM 1:6 on fair faces of brick work or concrete surfaces finished fair and even without using extra cement. |
| 104 | M & L for preparation of newly plastered surface ofwalls and applying two coats of oil bound distemper(white or tinted) over a coat of chalk whiting primer complete all as specified and as directed by Engr-in-Charge. |
| 105 | Plain Cement Concrete Type B1 1:2:4 (using 12.5 mm gradedstone aggregate) cast in situ inkerbs or mud stops, rounded or chamfered on edges of paving blocks as directed including use and waste of form work. |
| 106 | S&F 75mm dia PVC (SWR) floor trap with grating including joining to waste pipe fixed in solvent cement in any positioncomplete all as specified and directed. |
| 107 | S & F 75 mm bore PVC (SWR) pipe single socketed in any length with rubber ring joints jointing with adhesive to wall/laid in trenches complete all as specified and directed. |
| 108 | S & F 110 mm bore PVC (SWR) pipe single socketed in any length with rubber ring joints jointing with adhesive fixed in repair to wall/laid in trenches complete all as specified and directed. |
| 109 | S&F 110mm bore PVC (SWR) bends in any radius complete all as specified and directed. |
| 110 | S&F 75mm bore PVC (SWR) bends in any radius complete all as specified and directed. |
| 111 | S&F 75 mm PVC (SWR) branch piece, single (single Y) equal or unequal complete all as specified and directed. |
| 112 | S&F 110 mm PVC (SWR) branch piece, single (single Y) equal or unequal complete all as specified and directed. |
| 113 | S&F for 75mm PVC (SWR) junction single, (Single T) equal or unequalcomplete all as specified and directed. |
| 114 | Taking up or down existing steel 15 mm tubing and connections including cleaning for refixing or removal to store complete all as specified and as directed |
| 115 | Taking up or down existing steel 20 mm tubing and connections including cleaning for refixing or removal to store complete all as specified and as directed |
| 116 | S&F 15mm bore galvanized iron tubes medium grade with all fitting and fixed complete to walls, ceiling or laid in floor complete all as specified. |
| 117 | ditto as per description of item abovebut for 20mm bore tube |
| 118 | Supply and fixing pillar tap, fancy type, CP mixer for mixing hot & cold water screwed down for iron pipe and fixed all as specified and directed. |
| 119 | S&Fvitreous chinawash hand basin, white, flat back size 550mmx400mm including cast iron or mild steelbrackets including cutting for and pinning in brackets complete all as specified and as directed. |
| 120 | S&F beveled edge looking mirror size 450mm x600mm of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and aluminium frame, fixed with PVC gutties with chromium plated brass screws and cup washers complete all as specified. |
| 121 | S&F brass chromium plated towel rail 20 mm dia, 600mm long fixed with chromium plated brass screws wooden/plastic gutties complete all as specified and directed. |
| 122 | S&F 15mm PVC connection 450mm long with PTMT nuts of superior quality as specified |
| 123 | S&F 15mm stop valves/Angle cock , chromium plated fancy type, screwed down, high pressure with crutch or butter fly handlescrewed both endsforiron pipe or for unions |
| 124 | Supply, hoist and fix in position; 1000 litres capacity rotational moulded polythene water storage tank (cylindrical, vertical with closed top) ISI marked (Name of firm embossed or engraved on the body of tank) conforming to IS 12701, double layered including dismantling the existing tank complete all as specified. |
| 125 | S&F 20mm bore ball valve high pressure of PTMT with epoxy coated aluminium rod and high density polythene ball screwed for iron pipe (Min for 20mm – 210 gm) complete all as specified and directed. |
| 126 | S&F 20mm Gun metal globe or gate valves, with iron wheel headscrewed both ends for iron pipe and fixed. |
| 127 | M&L Granite 25mm thick (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite laid over 15mm thick screed bed in CM 1:4 complete all as specified and as directed. |
| 128 | Demolition of floor hearth or wall tiling including cement mortar bedding (not backing ) removing serviceable tiles to store and rubbish of the premises |
| 129 | M&L coloured glazed ceramic tiles 450x300 x7mm thick on verticle surfacesset and jointed in neat cement slurry and pointed in white or coloured cement to match the surface over 10 mm thick cement plaster in CM 1:4. |
| 130 | M & L for Machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete and rounding of edges . Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations including 15 mm thick screed bed cement mortar 1:6 complete all as specified and as directed |
| 131 | M&L for non-skid ceramic colouredtiles 7 to 8mm thickarea of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm in floors set and jointed in neat cement slurry and pointed in white or colored cement to match over and incl 15mm thick bedding layer CM 1:6complete all as specified. (Colour and shade as approved by Engr-In-Charge) |
| 132 | Taking down chowkhats or frame with shutter w/o taking off shutter from the framearea exc 1.5 Sqm but n exc 4.00 sameach all as specified. |
| 133 | S&F 30 mm thick flush shutter, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed. |
| 134 | Supply & Fixing 100mm size butt hinges extruded aluminum alloy with galvanised mild steel hinge plate complete all as specified. |
| 135 | S&F Aluminum anodized barrel tower boltof extruded section of size 100mm complete all as specified. |
| 136 | S&Fextruded Aluminum alloy handle fabricated of size 150mm all as specified and directed |
| 137 | S&F 250 mm long Mild steel sliding door bolts, plate type, stove enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed complete all as specified. |
| 138 | S&F 150mm longMild steel barrel tower bolts, stove enamelled black, with bright bolt and fixed complete all as specified and directed. |
| 139 | Mild steel Helical door spring 300mm long including roller plate, complete all as specified and directed. |
| 140 | Demolition of reinforced cement concrete of any description and in any position reinforcement cut as required for demolished complete all as specified and directed. |
| 141 | M&L for RCC B0 1:2:4 (12.5mm graded stone aggregate) in Chajjas all as complete as directd by Engineer-in-charge |
| 142 | M&L for 75 mm thick cement concrete (1:3:6) type C-2, using 40mm graded crushed stone aggregate as in plinth protection, surfaces finished even and fair without using extra cement complete all as specified and as directed. |
| 143 | S&F steel window 1.25mm thick box type (primer coated) ERW hollow P section of size 60x25mmsingle rebated comprises gauged skelton shutter ERW sec 50x20mm and 1mm thick with two open able leaf consisting two Nos sash bars of T section 20x3mm completed welded to frame with one vertical mullion of ERW box type T section of size 60x25mm and 1.25mm thick incl cutting holes and making good dismantled portion PCC 1:2:4 type B1 four Nos for each window incl following fittings weld to frame shutter (a) hold fast, 150mm long of 12mmx3mm made to shape-04 Nos per window (b) handle of Z section 20x25mm, 100mm long 01 Nos per leaf (c) MS Tower bolt 150mm long of 12x3mm made to shape-04 Nos per window (b) handle of Z section 20x25mm, 100 long stoper-01 No per leaf () MS pintal of hinges of size 75mmx12mm-02 Nos per leaf (g) fabrication & fixing arrangement as per Drg No. CEJZ/TD-06-07 , Note : wire mesh and painting shall be measured and paid separately under appropriate item. |
| 144 | ditto above but as in glazed windows. |
| 145 | Supply and fixing mild steel framed work for such as guard bars/ grills, grating etc with end of bars shouldered and/ or riveted forged into spikes, framed guard bars barred iron door, railings and similar work complete conforming to Fe-290 Gde E 165 including one shop coat of zinc chromate primer complete all as specified & directed. |
| 146 | M&L for sheet glass 3mm thick ordinary quality and glazing with oil putty or wooden beads not exceeding 0.5 Sqm in each pane. |
| 147 | S&F galvanized mild steel wire cloth 0.56 mm nominal dia and average width of aperture 1.18 mm and fixed with tinned tacks. |
| 148 | M&L for preparation of new steel surfaces & applying two coat of synthetic enamelpaintover a coat of red oxide. |
| 149 | S&F 75mm dia PVC (SWR) floor trap with grating including joining to waste pipe fixed in solvent cement in any positioncomplete all as specified and directed. |
| 150 | M&L 25 mm thickcement concrete type B-1, 1:2:4, (20mmgraded stone aggregate) as in floor finishesetc. |
| 151 | Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing |
| 152 | supply and fixing factory made solid panel PVC door shutter 30 mm thick (style)consisting of frame made out of MS tubes for top and bottom rail MS frame shall be covered with heat moulded plain colour PVC \"C\" channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail ; panelling of plain colour PVC sheet to be fitted in the M.S frame welded/sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement, suppling & fixing in the frame at site complete all as specified and directed. |
| 153 | Supply and fixing in repairs 10 litres capacity PVCvalveless syphonic action type, low level flushing cistern ISI Marked white with inlet, ball valve, float and handle including brackets fixed complete all as specified and as directed. |
| 154 | Supply and fixing in repairs vitreous china wash down water closet pan (pedestal pattern), white,and connection to drain (or outgoing pipe) and connection to flushing pipe, anti-syphonage pipe,(excluding flusing cistern and flush pipe) etc complete all as specified and as directed. |
| 155 | Supply and fixing in repair vitreous china bowl urinal, half stall, white complete including providing and fixing plugs, bedding urinal against wall in cement mortar (1:2) securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement, etc all as specified and directed. |
| 156 | M & L for preparation of old surface ofwalls and applying one coats of cement base paint complete all as specified and as directed by Engr-in-Charge. |
| 157 | M&L for preparation of new wooden surface of any description exc 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed by Engr-in-Charge. |
| 158 | Taking down carefully aluminium / copper point wiring (light / fan / socket or power) complete including fitting such as switches, ceiling roses, socket, light fittings, regulators etc complete and making good disturbed surfaces of walls, floors |
| 159 | Taking down main switch / DB as directed by Engineer-In-Charge. |
| 160 | Taking down unserviceable submain/ cable of any size as directed by Engineer-In-Charge. |
| 161 | M & L for concealed point wiring complete with 2.5 sqmm single core multistranded copper conductor FRLS, PVC insulated and unsheathed cable 650 /1100 volts grade drawn through & including PVC conduit ,medium grade with accessories like bends, tees, junction boxes etc fix on wall or ceiling surfaces all as specified including 2.5 sqmm , FRLS type , copper multistrandedcable as earth wire including switch/sockets and regulator and including cover plate white colour all as specified and directed for: |
| 162 | supply and fixing piano/flush type switch 1 way 16A, |
| 163 | supply and fixing piano /flush socket 1 way 16 amp |
| 164 | M & L for concealed point wiring complete with 1.5 sqmm single core multistranded copper conductor FRLS, PVC insulated and unsheathed cable 650 /1100 volts grade drawn through & including PVC conduit ,medium grade with accessories like bends, tees, junction boxes etc fix on wall or ceiling surfaces all as specified including 1.5 sqmm , FRLS type , copper multistrandedcable as earth wire includingswitch/sockets and regulator and including cover plate white colour all as specified and directed for: |
| 165 | One light /fan/cell bell point controlled by one one way switch as directed engineer-in-charge |
| 166 | One 3 pin piano /flushsocket outlet, 5Amps, independent with other switch |
| 167 | one 3 pin piano/flushsocket outlet 5 amps on same board with other switches. |
| 168 | supply and fixing piano/flush type switch 1 way 6A, |
| 169 | supply and fixing piano/flush type socket 1 way 6 amp |
| 170 | Supply , installation & commissioning MCB Load Distribution board VTPN/TPN 4 way double door, for mountingMCCB/DP/ SP/TP/ MCBs as Incoming / outgoing, factory made, confirming to IS, fabricated out of CRCA sheet , fitted with DIN channel, neutral link and suitable rated bus bar, DBs shall be semi glossyfinished with epoxy polyester based powder paint sprayed and backed at high temperature, between powder paint process the sheet steel having to go through the anti rust conditioning in not less than seven tank process to ensure smoothfinish and protection against corrosion atmosphere. The DBs shall be double door type with hinged door with locking arrangement. The DP/SP/TP MCB shall be of same make as DB. DB shall also be provided with label marking indicating the incoming and outgoing circuits on all way as specified. The DBs shall be of IP 43 - IK 09 with metal door complete all as specified and directed at site . |
| 171 | Supply and Fix4 Pole MCCBadjustable type 100 Amp, 50 Hz, 415 V with rupturing capacity 36 KA. |
| 172 | supply and fixing SHEET METAL ENCLOSURESFOR DB\"SSPN WHEN MCBs TO BE USED 8 way double door |
| 173 | S/F MCB SPN40 to 63 Ampsrating 240 volts ,10KA\"c\" curve miniature circuit breaker (MCB) of following poles and current carrying capacity in the MCB DB complete with connection testing and commisioning |
| 174 | M & L for sub main wiring with TWOcore PVC insulated and unsheathed cable 6 sqmm with multi stranded copper conductor , FRLS type cable drawn throughand including PVC concealed conduit of suitable size complete with all accessories alongwith provn of 2 run of 6 sqmm PVC insulated and unsheathed ,multi stranded copper conductor , FRLS type cable as earth wire. (2 runs of cable and one run of conduit shall be measured as one length) |
| 175 | M & L for sub main wiring with TWOcore PVC insulated and unsheathed cable 4 sqmm with multi stranded copper conductor , FRLS type cable drawn throughand including PVC concealed conduit of suitable size complete with all accessories alongwith provn of 2 run of 4 sqmm PVC insulated and unsheathed ,multi stranded copper conductor , FRLS type cable as earth wire. (2 runs of cable and one run of conduit shall be measured as one length) |
| 176 | Single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB of cap 20 amp complete all as directed and specified. |
| 177 | M & L ceiling rose surface bakelite 65 x 50 mm three terminals complete all as specified. |
| 178 | Earthing complete with galvanised steel earth plate electrode 60cm×60cm.× 6mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less\"than 1.5 metres below normal ground level, connected to galvanised earth lead wire 4.0mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No. 3 connected to earthing test point all as specified or indicated including testing on completion |
| 179 | Supply and fix exhaust fan, steel body AC single Phase. 230V of size 300m sweep with, blades, and frame and louvers |
| 180 | supply and fixing M & L Lamp holder, PVC/Polycarbonate type with back plate suitable for batten fittings |
| 181 | S&F LED tube light fitting 20W (Double side) including LED lamp 20W with 2100 lumen output with internal surge protection device of 4KV with voltage band of 140-280V CRI-6500K (White light) fixtures box type and connecting electrically to ceiling rose using PVC insulated and overall sheathed flexible copper conductor of size 0.50mm 3 core complete all as specified and directed. |
| 182 | Supply and fixing pvc wall mounted fans copper woundcompletewith blades, down rods, electronic regulator and accessories, 230 V, 450 mm sweep. Min air delivery 210 CFM with service value make cromtion,bajaj,surya. |
| 183 | supply and fixing recess /ceiling mounting LED light 1x36 watt cool white light of 6500k complete all as specified and directed . |
| 184 | supply and fixing S/F MCB SP 6-32 Amps 240 volts |
| 185 | Supply and fix electric water heater storage type steel body with copper inner tank and heating element upto 2 KW capacity 25 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostate,NRV, connection piece etc. |
| 186 | supply and fixing PVC insulated, amoured cable, heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 10 sq. mm 2 core |
| 187 | Taking down carefully aluminium / copper point wiring (light / fan / socket or power) complete including fitting such as switches, ceiling roses, socket, light fittings, regulators etc complete and making good disturbed surfaces of walls, floors |
| 188 | Taking down unserviceable Submain/ Cable/ Service wire of any size as directed by Engineer-In-Charge. |
| 189 | Taking down main switch / DB as directed by Engineer-In-Charge. |
| 190 | Taking down MCCB/MCB of any type/capacityas directed by Engineer-In-Charge. |
| 191 | M & L for concealed power wiring complete with 2.5 sqmm single core multistranded copper conductor FRLS, PVC insulated and unsheathed cable 650 /1100 volts grade drawn through & including PVC conduit ,medium grade with accessories like bends, tees, junction boxes etc fix on wall or ceiling surfaces all as specified including 2.5 sqmm , FRLS type , copper multistrandedcable as earth wire including pressed steel sunken boxes for mounting of switch/sockets and including cover plate white colour all as specified and directed. |
| 192 | S & F switch Piano 1 5 Amps, flush button type, SP, one way, 230 Volts, AC |
| 193 | S & Fsocket combination ,6 pin ,15 amps, flush type, multipurpose, 230 / 250 volts , ACwith ISI marked |
| 194 | M & L for sub main wiring with two single core PVC insulated and unsheathed cable 6 sqmm with multi stranded copper conductor , FRLS type cable drawn throughand including PVC concealed conduit of 25mm in size complete with all accessories alongwith provn of 6 sqmm PVC insulated and unsheathed ,multi stranded copper conductor , FRLS type cable as earth wire. |
| 195 | Supply and fix MCCB 63 Amps 4 pole415 Volt,25 KA breaking capacity . |
| 196 | S & F distribution board VTPN, double door, 4 way 440 Volts with sheet metal enclosure 200 Amps busbar suitable for fixing MCCB as incommer. |
| 197 | S/F MCB SP 6-32 Amps 240 volts |
| 198 | S&F steel tubes Light grade galvanized with all fitting and fixed completes to wall and ceiling or laid in floor of pipe 40 mm dia. |
| 199 | Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size: 25 sqmm 4 core |
| 200 | Excavation in trenches in soft/lose soil not exceeding 1.5 Mtr wide and not exc 1.5M depth for laying of UG cables and getting out all as specified and directed |
| 201 | Returning, filling, including spreading, levelling, watering and well ramming in layers not exc 25cms thick of soil complete all as specified and directed. |
| 202 | M & L river sand in trenches as cable cushioning 8 cm below the cables and 15cm above the cable which is to be punned down to 10m all as specified and directed.only punned thickness will be measured. |
| 203 | Removing the surplus excavated materisl/soil to a distance not exc 50Mtrs and depositing, where directed at a level not exceeding 1.5 Mtr above the starting point all as specified and directed. |
| 204 | Supply and lay burnt bricks sub class \"B\" standard size laid across the cable in trenches as protection to the cable all as specified and directed. |
| 205 | M&L for earthing complete with GI steel earth plate electrod 60x60cmx6.00mm thick bouried directly in ground /earth pit not less than 2.25m deep below the ground level with top edge of the plate not less than 1.5 m below the normal ground level connected to test point by using GI wire of dia 4 mm as earthing lead soldering/revated to earth plate at one end and connected DBby means of nut, bolts etc complete with PCC pit (1:3:6) type GI cover with handle funnel with watering pipe wire mess GI protection pipe for earthing lead all complete as specified and as per electric plate No.5 of SSR Part I |
We are a group of professionals specializing in custom software development, web development, mobile app development, IOT base solutions, web design, graphics & Enterprise solutions provid.
Copyright © 2025 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
