Military Engineer Services-MES has published Tender For Repair To Joinery, Plumbing Sunken Treatment And Connected Items In Officers Md Accn And Mt Line Of Stn Wksp Eme In The Area Of Age B/R-Ii Under Ge (West) Delhi Cantt-10. Submission Date for this Tender is 25-05-2024. Building Work Tenders in delhi Delhi. Bidders can get complete Tender details and download the document.
| FileName | File Description | File Size |
| 95cc205d-7844-4848-885a-08b069d34e6c.html | Tender Notice | 0 KB |
| BOQ_729726.xls | Tender Document | 0 KB |
| PS15.pdf | Tender Document | 0 KB |
| Tendernotice_1.pdf | Tender Document | 0 KB |
| Sl. No. | Item Description |
| 1 | Dismantling of floor, hearth or wall tiling including internal layer of terrazzo dado and mortar bedding removing rubbish of the premises complete all as specified and directed. |
| 2 | Demolition of Brickwork or stone/ boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articlescomplete all as specified and directed. |
| 3 | Demolition of cement concrete (un-reinforced) as in sunken floors, paving and any in position and any thickness upto seven story building including removal of rubbish out side complex (MOD land) , complete all as specified and directed. |
| 4 | Demolition of reinforced cement concrete of any description andin anypositionnot otherwise specifically provided for complete all as specified and directed. |
| 5 | Taking down cement plaster or any description including raking outjoints, hacking for key, scrubbing down with water etc and removal of debris to a distance not exc 50 mts and depositing where directed complete all as specified and directed. |
| 6 | M&L for light shade vitrified joint free tiles 7 to 8mm thick (square/rectangular) polished, area of each tile n exc 0.36 sqm, in floor set and jointed in neat cement slurry and pointed in coloured cement to match over and including 15mm thick screed bed in CM 1:6 etccomplete all as specified and directed. |
| 7 | All as per item No 6 above but on vertical surfaces of wall over & incl CM (1:4) 10mm thick cement plaster etc. complete all as specified and directed. |
| 8 | M&L for coloured glazed ceramic tiles in vertical surfaces 600x300X7-8 mm thick joint free as in vertical surfaces of wall as dado/skirting, set and jointed in neat cement slurry and pointed in white or coloured cement to match and including rendering 10mm thick in cement mortar 1:4 on brick wall of concrete surfaces and finished fair and even complete all as specified and directed. |
| 9 | M & L for coloured non-skid ceramic tiles7 to 8 mm thick ( square / rectangle) area of each tile exc 0.06 sqm but not exc 0.11 sqm in floors etc set andset and jointed in neat cement slurry and pointed in white or coloured cement to match the work including 15 thick screed bed in CM ( 1:6) complete all as specfied and directed. |
| 10 | M&L for coloured joint free non skid ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floorsset and jointed in neat cement slurry and pointed in white or coloured cement, laid over and including cement screed bed 15mm thick in CM 1:6 complete all as specified and directed. |
| 11 | M&L for precast cement concrete type B-1 (1:2:4) using 20mm graded stone aggregates as in lintels, landings, coverslabs (for man holes etc.) chullah hoods, chajjas, water troughs, mangers, shelves and similar articles with plain faces set in CM 1:4 complete all as specified and directed. |
| 12 | M&L for 18-20 mm thick black granite (of any type) work (table rubbed and polished) in window-cills, cooking platforms and like in including15mm thick screed in CM (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite incl polishing and rounding of edges complete all as specified anddirected. |
| 13 | M&L for Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, ending spirally for hooping forcolumns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified & directed. |
| 14 | Dismantling of 100 mm dia Cast Iron pipe(Soil/waste/vent) with fittings from walls, on floors & from trenches if required including taking out any type of joints complete all as specified and directed. |
| 15 | All as per item No. 14 above but 75mm dia. |
| 16 | Taking up or down GI tubing 15mm bore and connections including all fittings complete all as specified and directed. |
| 17 | All as per item No. 16 above but 20 mm bore . |
| 18 | All as per item No. 16above but 25 mm bore . |
| 19 | Supply and apply a glass fibre reinforced acrylic modified cementitious coating system.Prepration of surface of sunken portion and M & L for glass fibre reinforced acrylic modified cementitious coating system as top coat over reinforcement over base coat etc supply and apply a protection plaster (12-15 mm) admixed withappropriate integral waterproofing compound@ 0.10 kg per bag of cement. The product should conforms to IS 2645. Cleaning of RCCsurface to remove dust, loose particles grinding any sharp edges including M&L for sealaing of pipe penetration of toilets core cutting in the following stages:- Supply and apply solvent free, moisture insensitive epoxy resin based patch repair putty on pipe penetration surfaces. The putty shall be applied to a groove thickness of minimum 20mm on pipe penetration joint to concrete complete all as specified and directed. |
| 20 | Labour only for demolition of cement concrete (un-reinforced) as in sunken floors and refilling of same material in sunken floors complete all as specified and directed. |
| 21 | M&L for Cement concrete 1:5:10 type E2 (using 40mm graded aggregate) as in filling in sunken floors of toilets complete all as specified and directed. |
| 22 | M&L PCC (1:4:8) type D-2 using 40mm graded stone aggregate as infoundations, mass filling, sub base and the like all as specified. |
| 23 | M&L for25mm thick PCC 1:2:4 type B0 (using 12.5 mm gradedstone aggregate) as in levelling course complete all as specified and directed. |
| 24 | S&F 100 mm dia (bore of pipe) cast iron (sand cast) soil,waste and vent pipe in any length , with or without ears with cement joints and laid in trenches/floor complete all as specified and directed. |
| 25 | All as per item No 24 but fixed to walls. |
| 26 | S&F 75 mm dia (bore of pipe) cast iron (sand cast) soil,waste and vent pipe in any length , with or without ears with cement joints and laid in trenches/floor complete all as specified and directed. |
| 27 | All as per item No 26 but fixed to walls. |
| 28 | S&F 100 mm dia (bore of pipe) cast iron bends,Tee, diminishing pieces or tapers with cement jointfixed complete all as specified and directed. |
| 29 | All as per item No. 28above but 75mm dia (bore of pipe) |
| 30 | S&F 100 mm dia (bore of pipe) cast iron with oval access door bends ,Tee, diminishing pieces or tapers with cement jointfixed to walls complete all as specified and directed. |
| 31 | All as per item No. 30 above but 75mm dia (bore of pipe) |
| 32 | S&F 100mm bore cast iron branch pieces, single (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branches with cement joint complete all as specified and directed. |
| 33 | S&F 100mm bore cast iron branch pieces, double (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branches with cement joint complete all as specified and directed. |
| 34 | S&F 75mm bore cast iron branch pieces, single (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branches with cement joint complete all as specified and directed. |
| 35 | S&F 100mm bore cast iron socket (double) collars with cement joint complete all as specified and directed. |
| 36 | S&F 75mm bore cast iron socket (double) collars with cement joint complete all as specified and directed. |
| 37 | S&F 100mm bore cast iron sanitary connection socket to fit WC out-let complete all as specified and directed. |
| 38 | S&F in repairs Cast iron floor trap with 75mm dia outlet, with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) complete all as specified and directed. |
| 39 | S&F in repair stack clamps for 75mm bore CI pipe out of 50mm by 5mmflat iron and 16mm dia round iron stays , including bolts and nuts and securing ends of stays to wall complete all as specified and directed. |
| 40 | All as per item No. 39above but 100 mm bore CI Pipe. |
| 41 | Taking down PVC pipe, eaves and gutters(any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc., including cleaning or refixing or removal to store (measured overall as fixed along the centre line over fittings and accessories) complete all as specified and directed. |
| 42 | S & F 110 mm bore PVC (SWR) pipes single socketed,inanylength with rubber ring joints,fixed to wallsincluding all necessary fitting,extra joints and stack clamps stay including bolts and nuts complete all as specified and directed |
| 43 | S & F 110 mm bore PVC (SWR)bendsany radius complete all as specified and directed. |
| 44 | M & L for cutting chases, pinning in brick wall for concealed GI pipe , cutting n.exc 10cm girth and making good to facings where required and pointing in cement mortar 1:3, complete all as specified and directed. |
| 45 | S&F GI tubing 15mm bore medium grade galvanised with all fitting and fixed complete to walls and ceiling or laid in floors complete all as specified and directed. |
| 46 | S&F GI tubing 20 mm bore medium grade galvanised with all fitting and fixed complete to walls and ceiling or laid in floors complete all as specified and directed. |
| 47 | All as per item no. 46 above but except pipe. |
| 48 | S&F GI tubing 25 mm bore medium grade galvanised with all fitting and fixed complete to walls and ceiling or laid in floors complete all as specified and directed. |
| 49 | S&F 20 mm outer dia CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings including all fitting on walls/ceiling or laying in floors complete all as specified. |
| 50 | S&F25 mm outer dia CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings including all fitting on walls/ceiling or laying in floors complete all as specified and directed. |
| 51 | S&F in repair 20mm Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixedcomplete screwed for pipe complete all as specified and directed. |
| 52 | S&F in repair ball valve high pressure of PTMT with epoxy coatedaluminium rod & high density plastic ball screwed for iron pipe20 mm diacomplete all as specified and directred. |
| 53 | S&F 500 ltrs capacity rotationally moulded polythene water storage tanks (cylindrical vertical with closed top) multilayers layers of approved make hoisted & fixed at position and dismantling of old tank complete all as specified and directred. |
| 54 | S&F in repair 20mm bore GI tank nipple suitable for HDPE water tank complete all as specified and directred. |
| 55 | M&L for brick workwith sub class "B" straight or curved on plan exc 6m mean radius and built in CM 1:6 complete all as specified and directed. |
| 56 | M&L Brick work with sub class "B" brick staight or curved on plan to any radius in half brick thick wall built in CM 1:4 etc complete all as specificed and directed. |
| 57 | M&L for15mm thick rendering on concrete surface/brick surface in cement mortar (1:4) surface finished even and fair without using extra cement and complete all as specified and directed. |
| 58 | M&L for rendering 15mm thick cement plaster in cement mortar (1:6) finished even & fair withoutusing extra cement on brick/concrete surfaces complete all specified and directed. |
| 59 | M&L for rendering 10mm thick cement plaster in cement mortar (1:3) finished even & fair withoutusing extra cement on brick/concrete surfaces complete all specified and directed. |
| 60 | M&L for preparation of newsurfaces of walland applying twocoats of Oil bound distemper with roller completeover and including a coat of wall care putty (minimum thickness 1 mm) all as specified and as directed. |
| 61 | M&L for preparation of newsurfaces of ceiling and applying twocoats of Oil bound distemper with roller completeover and including wall care putty (minimum thickness 1 mm) all as specified and as directed. |
| 62 | M&L for preparation of new plastered surfaces of walland applying two coats of exterior emulsion paint with roller over and including a coat of wall care putty (minimum thickness 1 mm) completeall as specified and as directed. |
| 63 | M & L for complete removal of existing treatment from walls applying a coat of primer and applying two coats of Oil Bound distemper with rich matt finish with roller over a coat of wall care putty (minmum thickness 1mm) complete all as specified and directed. |
| 64 | M&L for preparation of old surfaces of ceiling and applying one coat of Oil bound distemper with roller completeall as specified and as directed. |
| 65 | S&F in repairs 10 ltrs capacityPVCvalveless syphonic action typelow level flushing cistern complete with syphone handle lever PVC bend including connecting to WC and fixing on walls with bracket complete all as specified and directed. |
| 66 | S&F in repair vitreous china wash hand basin (flat black) white of size 550x400mm excluding taps, waste chain and plug and porcelain stopper including a pair of mild steel angle iron brackets, waste pipe and coupling of suitable size complete all as specified and directed. |
| 67 | S&F in repair vitreous china wash hand basin (flat black) white of size 550x400mm with pedestal excluding taps, waste chain and plug and porcelain stopper including a pair of mild steel angle iron brackets, waste pipe and coupling of suitable size complete all as specified and directed. |
| 68 | S&F in repair 15mm dia brass chromium plated centre hole mixer for mixing hot and cold water screwed down for iron pipe and fixed to WHB including connection pipecomplete all as specified and directed. Make : Shakti Cat No. DES-7513 or Prayag Cat No. PIS-50H or Kerovit Cat no. KB511027 |
| 69 | S&F in repair 15mm dia wall mixer with conversion bend 2 in 1 chromium plated brass fancy type with all connection slieves, Capstain head, screwed down complete all as specified and directed. Make : Shakti Cat No. DES 7517or Prayag Cat No. 9375Nor Kerovit Cat no. KB511019 |
| 70 | S&F in repair 15mm dia wall mixer non telephonic type chromium plated brass fancy type with all connection slieves, Capstain head, screwed down complete all as specified and directed. Make : Shakti Cat No. DES 7515 or Kerovit Cat no. KB511021 or equivalent of prayag |
| 71 | S&F in repair angle valve 15mm bore dia brass chromium plated fancy type, screwed down, new high pressure with lever type , chromium plated for iron pipe or unions complete all as specified and directed.Make : Shakti Cat No. DES 7506 or Kerovit Cat no. KB511003 or Prayag Cat No. 9310 N |
| 72 | S&F in repair brass CP bib taps longbody 15mm bore with lever type handle complete all as specified and directed . Make : Shakti Cat No. DES 7503 or Kerovit Cat no. KB511004 or Prayag Cat No. 9306 N |
| 73 | S&F in repair 15mm dia Pillar taps fancy type, cast copper alloy, with lever type, chromium plated, screwed down high pressure, with or without lettered "Hot" or "Cold" with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and directed.Make : Shakti Cat No. DES 7501 or Kerovit Cat no. KB511001 or Prayag Cat No. 9302 N |
| 74 | S&F in repair brass CP 2 in 1 bib taps 15mm bore with lever type handle complete all as specified and directed . Make : Shakti Cat No. DES 7511 or Kerovit Cat no. KB511005 or Prayag Cat No. 9312 N |
| 75 | S&F in repair arcylic glass shelf size 450mmx100mm with stainless steel railing fixed to wall with wooden plug and screws complete all as specified and directed . |
| 76 | S&F in repair 5.5mm thick sheet glass corner shelf 300 mm size in toilet and bath including stainless steel railing and CP bracket complete all as specified and directed. |
| 77 | S&F in repair 600x450mm frameless bevelled edge of 5 mm thick selected quality glass for wall and fixed with wooden plugs and 04 Nos CP brass screw and cup washer complete all as specified and directed. |
| 78 | S&Fin repair brass chromium plated soap dish fancy type fixed to wall with CP brass screws complete all as specified and directed. Make : Shakti Cat No. SB-9812 or Prayag Cat No. GBA-135 |
| 79 | S&F in repairs chromium plated brass overhead shower rose 100 mm size swivel type with 225mm long chromium plated arm rod including fixing to steel pipe or union complete all as specified and directed . |
| 80 | S&F in repair Brass chromium plated toilet paper holder fancy type with flap fixed to wall with CP brass screws of standard size complete all as specified and directed. Make : Shakti Cat No. SB-9975 or Prayag Cat No. GBA-118S |
| 81 | S&F in repair brass chromium plated health faucet with 1.0 mtr SS flexile pipe 15 mm dia fixed to angle valve complete all as specified and and directed as per sample approved by GE . Make : Shakti Cat No. SB-9853 or Prayag Cat No. GBEA-1006 |
| 82 | S&F in repair vitreous pedestal pattern (European type) water closet pan white cast iron P orS trap type including provn of fixing bolt and plastic seat cover heavy duty with hinging device including 32mm dia flush pipe complete all as specified and directed. |
| 83 | S&F in repairs PVC Connection 15mm size with PTMT nuts of length 450mm complete all as specified and directed. |
| 84 | S&F in repair brass chromium plated steel tubular towel rail 20mm dia "D" type 60cm long between flanges including a pair of CP brass bracket, complete all as specified and directed. |
| 85 | S&F in repairs Vitreous China squatting pan, ‘Orissa’ pattern" size 580 x 440 mm white with integral foot rests (excluding flushing cistern), including flush pipe of polyethylene of low or high density, connection to trap, and to flushing pipe, anti-syphonage pipe, etc. complete trap set in concrete and including supply and fixing 100mm cast iron sanitary connection socket to fit WC out-let complete all as specified and directed. |
| 86 | S&F in repair 100mm bore cast iron "P" Traps complete all as specified and directed. |
| 87 | S&F in repair brass chromium plated grating 100 mm dia with or without waste hole, complete all as specified and directed |
| 88 | S & F in repairs plastic water closet seat cover white (Heavy duty), closed pattern with flat bottom, with mild steel chromium plated or aluminised hinging device suitable for existing WC complete all as specified and directed. |
| 89 | Taking down door/window frames with shutters with shutters (without taking off shutters from the frames)n.exc 1.5 sqm each complete all as specified and directed. |
| 90 | Taking down door/window frames with shutters exc 1.50 sqm but not exc 4.00 sqm each (without taking off shutters from frame) complete all as specified and directed. |
| 91 | Taking down shutters of any description exc 1 sq. m and n exc 2 sq. m each complete all as specified and directed. |
| 92 | S&F fibre glass reinforced plastic (FRP) door frame shall be three legged of cross section 90mmx45mm having single rebate of 32mmx15mm to receive shutter of 30mm thickness. The laminate door frame moulde with fire retardant grade unsaturated polyester resin and chopped mat.Door frame laminate shall be 2mm thick and shall be filled with suitable wooden block in all the three legs.The frame shall be covered with fibre glass from all sides. MS stay shall be provided at the bottom to steady the frame as per specification & complete all as specified and directed. |
| 93 | S&F FRP door shutter 30mm thick glass fibre reinforced plastic (FRP) moulded door shutter of required colour and approved brand and manufacturer made with retardant grade unsaturated poyester resin moulded to 3mm thick FRP laminate for forming hollow rails and styles with wooden frame and suitable blocks of seasoned wood inside at required places for fixing of fittings, cast monolithically with 5mm thick FRP panels and confirming to IS 14856-2000 supply and fixing in the frame at site complete all as per specified and as directed. |
| 94 | S & F solid PVC door frame of size 50 mm x 47 mm made out of 5mm thickPVC sheetreinforced with mild steel square tube complete all as specified and directed. |
| 95 | S & F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixingcomplete all as per specification and directed. |
| 96 | S&F 100 mm Stainless steel butt hinges medium weight cold rolledfixed to PVC/FRP doors with SS screws complete all as specified and directed. |
| 97 | S&F 150mm long aluminum anodized barrel tower bolt of extruded section complete all as specified and directed. |
| 98 | S&F 125mm long aluminium handles cast type anodised ISI Marked complete all as specified and directed. |
| 99 | S&F 2nd class hardwood 35mm thick factory made Plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated complete all as specified and directed. |
| 100 | M&L for 35 mm thick 2nd class hard wood glazed and skelton door shutter,open rebated and prepared to receiveglass/guage etc. (with sash bar) edge of frames plain, chamfered or rounded, fitted with cut & mitred beads for securing glass /wire clothcomplete all as specified and directed. |
| 101 | M&L Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing conforming Fe.290.Gde-E-165complete all as specified and directed. |
| 102 | M&L Framed work such as grills,gratings with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and directed. |
| 103 | S&F mild steel work as in hold fast of flat iron and similar articles conforming to Fe-410-0 complete all as specified and directed. |
| 104 | M&L for cement concrete 1:2:4 type B1 (using20mm graded stone aggregate) as in blocks for hold fast, coping,benching etc. including weathering, slightly rounded or chamfered angles or throating including form work to concrete surfaces complete all as specified and directed. |
| 105 | S&F 100 mm butt hinges medium weight cold rolled mild steel fixed with screws or welded complete all as specified and directed. |
| 106 | S&F anodised aluminium barrel tower bolt extruded sections 200 mm size complete all as specified and directed. |
| 107 | S&F 150mm long, Aluminium handles, cast type,anodised complete all as specified and directed. |
| 108 | S&F Aluminium alloy, anodised, sliding door bolt 250mm long with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed. |
| 109 | M&L for preparing previously untreated wood and wood based material of any description over 10cm width/girth and applying two coats of synthetic enamel paint over one coat of pink primer including preparation of surface complete all as specified and directed. |
| 110 | M&L for preparing previously untreated steel surfaces of any description over 10cm width/girth and applying two coats of synthetic enamel paint over one coat of redoxide primer including preparation of surface. |
| 111 | Dismantling boarding and description (board/plywood) fixed in any position with screw, complete all as specified and directed. |
| 112 | S &F 19/20 mm thick Medium Density Fibre Board(MDF), Pre Laminated exteriorgrade both side laminated board fixed to frame as in shutters to cup board and kitchen cabinet etc including 19/20x 2mm lipping /beading all around shutters and fixing complete to wall with fasteners complete all as specified and directed . |
| 113 | S&F Stainless steelauto closing hinges openable at 0 degree for kitchen cabinet shutters complete all as per specified and directed. |
| 114 | S&F stainless steel handles 100 mm sizefor kitchen cabinet shutters complete all as per specified and directed. |
| 115 | S&F for 18-19mm Prelaminated particle board, exterior grade, prelaminated one side with decorative choice lamination & other side balancing white laminationas in CB shutter, lipping and necessary rebating for double shutter where required and polishing to lipping fixing complete to wall with fasteners complete all as specified. |
| 116 | S & F in repair Continuous (piano) hinges, mild steel bright finished or electrogalvanised, width of flap (when open) 30 mm complete all as specified and directed. |
| 117 | S&F Magnetic Catcher of standard size and quality as in kitchen cabinet complete all as specified and directed. |
| 118 | S&F40mm dia cupboard knobs fixed with nuts, screw and washer of mild steel, bright finished, complete all as specified and directed. |
| 119 | M&L for powder coating (minimum thickness of powder coating 50 micron) aluminium frame section for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and directed. |
| 120 | M&L for powder coating (minimum thickness of powder coating 50 micron) aluminium window and ventilator shutters, side hung/top hung type without sash bars, partly fixedtype, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, powder coated aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1 no.) complete all as specified and directed. |
| 121 | M&L powder coated aluminium 50 micron anodised three way track sliding windows of frame size 92 mm x 31.75 mm x 1.5 mm thickness weight of 1.07 Kg/m (section No. 20831 of JINDAL) and of shutter size 40mm x 18 (with 9.00 mm interlocking legs) x 1.45 mm thick ( section No. 20737 of JINDAL) section, including 95mm aluminium handle with spring lock, stainless steel wire cloth, 0.45 mm nominal dia of wire and average width of aperature 1.4 mm and fixed with steel wire stapples 5mm thick plain glass including necessary fitting/fixture/aluminium snap beads complete all as specified. (Note : Measurement shall be taken clear opening ie out to out of window frame as a whole including all fittings and fixtures and no extra shllabe apid separately. Cost of glass and wire cloth included herein complete all as specified and directed. |
| 122 | Hacking out old broken glass (any thickness,size,quality or description) from wooden frames metal frames or stone,concrete or brick surrounds,glazed with putty or fixed with beads complete all as specified and directed. |
| 123 | S & F 4mm thick Figured glass ,pin head type and glazing with rubber gasket in sqr n exc 0.5 sqm in each pane etc complete all as specified and directed. |
| 124 | S & F 4mm thick ordinary sheet glass fixed with clips and puttyor with aluminium snap beadingcomplete all as specified and directed. |
| 125 | S&F stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperature 1.40 mm and fixed with stainless steel wire staples, etc complete all as specified and directed. |
| 126 | S & F in repair stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40mm fixed with tinned tack or stainless steel wire staples including wooden beading complete all as specified and directed . |
| 127 | S&F in repair 15mm dia sink mixer chromium plated brass fancy type with all connection slieves, Capstain head, screwed down complete all as specified and directed.Make : Shakti Cat No. DES-7514 or Prayag Cat No. 9355-N or Kerovit Cat no. KB511024 |
| 128 | S&F in repair kitchen plate rack with four shelves made out of stainless steel sheet minimum1 mm thick overall size 90x90x25cm including taking out old plate rack complete all as specified and directed. |
| 129 | S&F in repair sinks made of stainless steel 1 mm thick in kitchen with plugs, washers includingcoupling and waste pipe, fixed inRCC slab in kitchen and connecting to trap, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm complete all as specified and directed. |
| 130 | S&F in repair Stainless steel sink with draining board, made of stainless steel 1 mm thick for kitchen or laboratory with plug, washers waste pipe and coupling, cast iron cantilever brackets,connecting union overall size 915mmx460mm with bowl size 410mm x330mm x 160mmcomplete all as specified and directed. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
