Military Engineer Services-MES has published Tender For Petty Repair Work In Officers Fafa Md Accn And Mt Line Of Stn Wksp Eme In The Area Of Age B/R-Ii Under Ge (West) Delhi Cantt-10.. Submission Date for this Tender is 30-05-2024. Building Work Tenders in delhi Delhi. Bidders can get complete Tender details and download the document.
| Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
| 1 | 23-May-2024 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 30-05-2024 |
| FileName | File Description | File Size |
| a0b51d78-24bf-4d43-9f5d-03bcfac50c64.html | Tender Notice | 0 KB |
| BOQ_729717.xls | Tender Document | 0 KB |
| PS18.pdf | Tender Document | 0 KB |
| Tendernotice_1.pdf | Tender Document | 0 KB |
| Sl. No. | Item Description |
| 1 | Dismantling of floor, hearth or wall tiling including internal layer of terrazzo dado and mortar bedding removing rubbish of the premises complete all as specified and directed. |
| 2 | Demolition of Brickwork or stone/ boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articlescomplete all as specified and directed. |
| 3 | Demolition of cement concrete (un-reinforced) as in sunken floors, paving and any in position and any thickness upto seven story building including removal of rubbish out side complex (MOD land) , complete all as specified and directed. |
| 4 | Demolition of reinforced cement concrete of any description andin anypositionnot otherwise specifically provided for complete all as specified and directed. |
| 5 | Taking down cement plaster or any description including raking outjoints, hacking for key, scrubbing down with water etc and removal of debris to a distance not exc 50 mts and depositing where directed complete all as specified and directed. |
| 6 | M&L for light shade vitrified joint free tiles 7 to 8mm thick (square/rectangular) polished, area of each tile n exc 0.36 sqm, in floor set and jointed in neat cement slurry and pointed in coloured cement to match over and including 15mm thick screed bed in CM 1:6 etccomplete all as specified and directed. |
| 7 | All as per item No 6 above but on vertical surfaces of wall over & incl CM (1:4) 10mm thick cement plaster etc. complete all as specified and directed. |
| 8 | M&L for coloured glazed ceramic tiles in vertical surfaces 600x300X7-8 mm thick joint free as in vertical surfaces of wall as dado/skirting, set and jointed in neat cement slurry and pointed in white or coloured cement to match and including rendering 10mm thick in cement mortar 1:4 on brick wall of concrete surfaces and finished fair and even complete all as specified and directed. |
| 9 | M & L for coloured non-skid ceramic tiles7 to 8 mm thick ( square / rectangle) area of each tile exc 0.06 sqm but not exc 0.11 sqm in floors etc set andset and jointed in neat cement slurry and pointed in white or coloured cement to match the work including 15 thick screed bed in CM ( 1:6) complete all as specfied and directed. |
| 10 | M&L for coloured joint free non skid ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floorsset and jointed in neat cement slurry and pointed in white or coloured cement, laid over and including cement screed bed 15mm thick in CM 1:6 complete all as specified and directed. |
| 11 | M&L for coloured joint free non skid ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floorsset and jointed in neat cement slurry and pointed in white or coloured cement, laid over and including cement screed bed 15mm thick in CM 1:6 complete all as specified and directed. |
| 12 | M&L for precast cement concrete type B-1 (1:2:4) using 20mm graded stone aggregates as in lintels, landings, coverslabs (for man holes etc.) chullah hoods, chajjas, water troughs, mangers, shelves and similar articles with plain faces set in CM 1:4 complete all as specified and directed. |
| 13 | M&L for 18-20 mm thick black granite (of any type) work (table rubbed and polished) in window-cills, cooking platforms and like in including15mm thick screed in CM (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite incl polishing and rounding of edges complete all as specified anddirected. |
| 14 | M&L for Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, ending spirally for hooping forcolumns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified & directed. |
| 15 | Dismantling of 100 mm dia Cast Iron pipe(Soil/waste/vent) with fittings from walls, on floors & from trenches if required including taking out any type of joints complete all as specified and directed. |
| 16 | All as per item No. 15 above but 75mm dia. |
| 17 | Taking up or down GI tubing 15mm bore and connections including all fittings complete all as specified and directed. |
| 18 | All as per item No. 17 above but 20 mm bore . |
| 19 | Supply and apply a glass fibre reinforced acrylic modified cementitious coating system.Prepration of surface of sunken portion and M & L for glass fibre reinforced acrylic modified cementitious coating system as top coat over reinforcement over base coat etc supply and apply a protection plaster (12-15 mm) admixed withappropriate integral waterproofing compound@ 0.10 kg per bag of cement. The product should conforms to IS 2645. Cleaning of RCCsurface to remove dust, loose particles grinding any sharp edges including M&L for sealaing of pipe penetration of toilets core cutting in the following stages:- Supply and apply solvent free, moisture insensitive epoxy resin based patch repair putty on pipe penetration surfaces. The putty shall be applied to a groove thickness of minimum 20mm on pipe penetration joint to concrete complete all as specified and directed. |
| 20 | M&L for Cement concrete 1:5:10 type E2 (using 40mm graded aggregate) as in filling in sunken floors of toilets complete all as specified and directed. |
| 21 | M&L PCC (1:4:8) type D-2 using 40mm graded stone aggregate as infoundations, mass filling, sub base and the like complete all as specified and directed.. |
| 22 | M&L for25mm thick PCC 1:2:4 type B0 (using 12.5 mm gradedstone aggregate) as in levelling course complete all as specified and directed. |
| 23 | S&F 100 mm dia (bore of pipe) cast iron (sand cast) soil,waste and vent pipe in any length , with or without ears with cement joints and laid in trenches/floor complete all as specified and directed. |
| 24 | All as per item No 23 but fixed to walls. (Note: work will be executed up to G+6 storey height building) complete all as specified and directed. |
| 25 | S&F 75 mm dia (bore of pipe) cast iron (sand cast) soil,waste and vent pipe in any length , with or without ears with cement joints and laid in trenches/floor complete all as specified and directed. |
| 26 | All as per item No 25 but fixed to walls. (Note : work will be executed up to G+6 storey height building) |
| 27 | S&F 100 mm dia (bore of pipe) cast iron bends,Tee, diminishing pieces or tapers with cement jointfixed complete all as specified and directed. |
| 28 | All as per item No. 27above but 75mm dia (bore of pipe) |
| 29 | S&F 100 mm dia (bore of pipe) cast iron with oval access door bends ,Tee, diminishing pieces or tapers with cement jointfixed to walls complete all as specified and directed. |
| 30 | All as per item No. 29 above but 75mm dia (bore of pipe) |
| 31 | S&F 100mm bore cast iron branch pieces, single (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branches with cement joint complete all as specified and directed. |
| 32 | S&F 75mm bore cast iron branch pieces, single (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branches with cement joint complete all as specified and directed. |
| 33 | S&F 100mm bore cast iron socket (double) collars with cement joint complete all as specified and directed. |
| 34 | S&F 75mm bore cast iron socket (double) collars with cement joint complete all as specified and directed. |
| 35 | S&F in repairs Cast iron floor trap with 75mm dia outlet, with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) complete all as specified and directed. |
| 36 | Taking down PVC pipe, eaves and gutters(any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc., including cleaning or refixing or removal to store (measured overall as fixed along the centre line over fittings and accessories) complete all as specified and directed. |
| 37 | S & F 110 mm bore PVC (SWR) pipes single socketed,inanylength with rubber ring joints,fixed to wallsincluding all necessary fitting,extra joints and stack clamps stay including bolts and nuts complete all as specified and directed. (Note : work will be executed up to G+6 storey height building) |
| 38 | S & F 110 mm bore PVC (SWR)bendsany radius complete all as specified and directed. |
| 39 | M & L for cutting chases, pinning in brick wall for concealed GI pipe , cutting n.exc 10cm girth and making good to facings where required and pointing in cement mortar 1:3, complete all as specified and directed. |
| 40 | S&F GI tubing 15mm bore medium grade galvanised with all fitting and fixed complete to walls and ceiling or laid in floors complete all as specified and directed. |
| 41 | S&F GI tubing 20 mm bore medium grade galvanised with all fitting and fixed complete to walls and ceiling or laid in floors complete all as specified and directed. (Note : work will be executed up to G+6 storey height building) |
| 42 | All as per item no. 41 above but except pipe. (Note : work will be executed up to G+6 storey height building) |
| 43 | S&F 20 mm outer dia CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings including all fitting on walls/ceiling or laying in floors complete all as specified and directed. |
| 44 | S&F in repair fitting for 20mm outer bore CPVC pipes SDR 11 such as sockets, elbow, nipple, tee, union, plugs, reducers(ISI marked)complete all as specified and directed. |
| 45 | S&F in repair 20mm Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixedcomplete screwed for pipe complete all as specified and directed. |
| 46 | S&F in repair ball valve high pressure of PTMT with epoxy coatedaluminium rod & high density plastic ball screwed for iron pipe20 mm diacomplete all as specified and directred. |
| 47 | S&F 500 ltrs capacity rotationally moulded polythene water storage tanks (cylindrical vertical with closed top) multilayers layers of approved make hoisted & fixed at position and dismantling of old tank complete all as specified and directred. |
| 48 | S&F in repair 20mm bore GI tank nipple suitable for HDPE water tank complete all as specified and directred. |
| 49 | M&L for brick workwith sub class "B" straight or curved on plan exc 6m mean radius and built in CM 1:6 complete all as specified and directed. |
| 50 | M&L Brick work with sub class "B" brick staight or curved on plan to any radius in half brick thick wall built in CM 1:4 etc complete all as specificed and directed. |
| 51 | M&L for 15 mm thick rendering in ready mix mortar on walls as whole or in patch on any faces of brick/concrete finished even and fair without using extra cement including necessary scaffolding and taking down old plastering complete all as specified and directed. (Note : work will be executed up to G+6 storey height building) |
| 52 | M&L for 5 mm thick rendering in ready mix mortar on ceiling as whole or in patch on any faces of brick/concrete finished even and fair without using extra cement including necessary scaffolding and taking down old plastering complete all as specified and directed. (Note : work will be executed up to G+6 storey height building) |
| 53 | M&L for preparation of newsurfaces of walland applying twocoats of Oil bound distemper with roller completeover and including a coat of wall care putty (minimum thickness 1 mm) all as specified and as directed. |
| 54 | M&L for preparation of newsurfaces of ceiling and applying twocoats of Oil bound distemper with roller completeover and including wall care putty (minimum thickness 1 mm) all as specified and as directed. |
| 55 | M&L for preparation of new plastered surfaces of walland applying two coats of exterior emulsion paint with roller over and including a coat of wall care putty (minimum thickness 1 mm) completeall as specified and as directed. |
| 56 | S&F in repairs spindle for 15mm CP / brass suitable for existing CP bib cock, stop cock & concealed stop valves, WHB mixers, wall mixers, pillar cocks etc complete all as specified and directed. |
| 57 | S&F in repairs 15mm dia small fittings galvanised iron medium grade such as sockets, elbow, nipple, tee, union, plugs, reducers(ISI marked), complete all as specified and directed |
| 58 | S&F in repairs 20mm dia small fittings galvanised iron medium grade such as sockets, elbow, nipple, tee, union, plugs, reducers(ISI marked), complete all as specified and directed |
| 59 | S&F in repairs brass CP 2 in 1 angle valve 15mm bore with lever type handle complete all as specified and directed . Make : Shakti Cat No. DES 7512 or Kerovit Cat no. KB511040 or Prayag Cat No. 9311 N |
| 60 | S&F in repairs internal fitting complete for 10 ltrs capacityPVCvalveless syphonic action typelow level flushing cistern 10 ltrs capacityPVCvalveless syphonic action typelow level flushing cistern complete all as specified and directed |
| 61 | S&F in repairs ball cock for 10 ltrs capacityPVCvalveless syphonic action typelow level flushing cistern complete all as specified and directed |
| 62 | S&F in repairs SS bracket (F bracket) for fixing of glass corner/glass shelf complete all as specified and directed. |
| 63 | S&F in repair 3D hydraulic L bihari/stainless steel autoclosing hinges (Al bihari Hinges) openable at 0 degree complete all as specified and directed. |
| 64 | S&F in repair 15mm bore Bib tap standard of PTMT any colour high pressure screwed for iron pipe and fixed complete all as specified and directed. Make : Shakti Cat No. SB-1123 or Prayag Cat No. 121-E |
| 65 | S&F in repair 15mm bore Angle stop valve of PTMT any colour high pressure screwed for iron pipe and fixed complete all as specified and directed. Make : Shakti Cat No. SB-1144 or Prayag Cat No. 144-E |
| 66 | S&F in repair 15mm bore pillar tap of PTMT any colour high pressure screwed for iron pipe and fixed complete all as specified and directed. Make : Shakti Cat No. SB-1130 or Prayag Cat No. 130-E |
| 67 | S&F in repairs 10 ltrs capacityPVCvalveless syphonic action typelow level flushing cistern complete with syphone handle lever PVC bend including connecting to WC and fixing on walls with bracket complete all as specified and directed. |
| 68 | S&F in repair vitreous china wash hand basin (flat black) white of size 550x400mm excluding taps, waste chain and plug and porcelain stopper including a pair of mild steel angle iron brackets, waste pipe and coupling of suitable size complete all as specified and directed. |
| 69 | S&F in repair vitreous china wash hand basin (flat black) white of size 550x400mm with pedestal excluding taps, waste chain and plug and porcelain stopper including a pair of mild steel angle iron brackets, waste pipe and coupling of suitable size complete all as specified and directed. |
| 70 | S&F in repair 15mm dia brass chromium plated centre hole mixer for mixing hot and cold water screwed down for iron pipe and fixed to WHB including connection pipecomplete all as specified and directed. Make : Shakti Cat No. DES-7513 or Prayag Cat No. PIS-50H or Kerovit Cat no. KB511027 |
| 71 | S&F in repair 15mm dia wall mixer with conversion bend 2 in 1 chromium plated brass fancy type with all connection slieves, Capstain head, screwed down complete all as specified and directed. Make : Shakti Cat No. DES 7517or Prayag Cat No. 9375Nor Kerovit Cat no. KB511019 |
| 72 | S&F in repair 15mm dia wall mixer non telephonic type chromium plated brass fancy type with all connection slieves, Capstain head, screwed down complete all as specified and directed. Make : Shakti Cat No. DES 7515 or Kerovit Cat no. KB511021 or equivalent of prayag |
| 73 | S&F in repair angle valve 15mm bore dia brass chromium plated fancy type, screwed down, new high pressure with lever type , chromium plated for iron pipe or unions complete all as specified and directed.Make : Shakti Cat No. DES 7506 or Kerovit Cat no. KB511003 or Prayag Cat No. 9310 N |
| 74 | S&F in repair brass CP bib taps longbody 15mm bore with lever type handle complete all as specified and directed . Make : Shakti Cat No. DES 7503 or Kerovit Cat no. KB511004 or Prayag Cat No. 9306 N |
| 75 | S&F in repair 15mm dia Pillar taps fancy type, cast copper alloy, with lever type, chromium plated, screwed down high pressure, with or without lettered "Hot" or "Cold" with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and directed.Make : Shakti Cat No. DES 7501 or Kerovit Cat no. KB511001 or Prayag Cat No. 9302 N |
| 76 | S&F in repair brass CP 2 in 1 bib taps 15mm bore with lever type handle complete all as specified and directed . Make : Shakti Cat No. DES 7511 or Kerovit Cat no. KB511005 or Prayag Cat No. 9312 N |
| 77 | S&F in repair sheet glass shelf size 450mmx100mm with stainless steel railing fixed to wall with wooden plug and screws complete all as specified and directed . Make : Shakti Cat No. SB-9842 or Prayag Cat No. BEA-45G |
| 78 | S&F in repair sheet glass corner shelf 300 mm size in toilet and bath including stainless steel railing and CP bracket complete all as specified and directed. Shakti Cat No. SB-9846 or Prayag Cat No. BEA-44G |
| 79 | S&F in repair 600x450mm frameless bevelled edge of 5 mm thick selected quality glass for wall and fixed with wooden plugs and 04 Nos CP brass screw and cup washer complete all as specified and directed. |
| 80 | S&Fin repair brass chromium plated soap dish fancy type fixed to wall with CP brass screws complete all as specified and directed. Make : Shakti Cat No. SB-9812 or Prayag Cat No. GBA-135 |
| 81 | S&F in repairs chromium plated brass overhead shower rose 100 mm size swivel type with 225mm long chromium plated arm rod including fixing to steel pipe or union complete all as specified and directed . |
| 82 | S&F in repair Brass chromium plated toilet paper holder fancy type with flap fixed to wall with CP brass screws of standard size complete all as specified and directed. Make : Shakti Cat No. SB-9975 or Prayag Cat No. GBA-118S |
| 83 | S&F in repair brass chromium plated health faucet with 1.0 mtr SS flexile pipe 15 mm dia fixed to angle valve complete all as specified and and directed as per sample approved by GE . Make : Shakti Cat No. SB-9853 or Prayag Cat No. GBEA-1006 |
| 84 | S&F in repair vitreous pedestal pattern (European type) water closet pan white cast iron P orS trap type including provn of fixing bolt and plastic seat cover heavy duty with hinging device including 32mm dia flush pipe complete all as specified and directed. |
| 85 | S&F in repairs PVC Connection 15mm size with PTMT nuts of length 600mm complete all as specified and directed. |
| 86 | S&F in repair brass chromium plated steel tubular towel rail 20mm dia "D" type 60cm long between flanges including a pair of CP brass bracket, complete all as specified and directed. |
| 87 | S&F in repairs Vitreous China squatting pan, ‘Orissa’ pattern" size 580 x 440 mm white with integral foot rests (excluding flushing cistern), including flush pipe of polyethylene of low or high density, connection to trap, and to flushing pipe, anti-syphonage pipe, etc. complete trap set in concrete and including supply and fixing 100mm cast iron sanitary connection socket to fit WC out-let complete all as specified and directed. |
| 88 | S&F in repair 100mm bore cast iron "P" Traps complete all as specified and directed. |
| 89 | S&F in repair brass chromium plated grating 100 mm dia with or without waste hole, complete all as specified and directed |
| 90 | S & F in repairs plastic water closet seat cover white (Heavy duty), closed pattern with flat bottom, with mild steel chromium plated or aluminised hinging device suitable for existing WC complete all as specified and directed. |
| 91 | S&F in repair 15mm dia sink mixer chromium plated brass fancy type with all connection slieves, Capstain head, screwed down complete all as specified and directed.Make : Shakti Cat No. DES-7514 or Prayag Cat No. 9355-N or Kerovit Cat no. KB511024 |
| 92 | S&F in repair kitchen plate rack with four shelves made out of stainless steel sheet minimum1 mm thick overall size 90x90x25cm including taking out old plate rack complete all as specified and directed. |
| 93 | S&F in repair sinks made of stainless steel 1 mm thick in kitchen with plugs, washers includingcoupling and waste pipe, fixed inRCC slab in kitchen and connecting to trap, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm complete all as specified and directed. |
| 94 | S&F in repair Stainless steel sink with draining board, made of stainless steel 1 mm thick for kitchen or laboratory with plug, washers waste pipe and coupling, cast iron cantilever brackets,connecting union overall size 1140mmx510mm with bowl size 510mm x 406mm x 203mmcomplete all as specified and directed. |
| 95 | S&F in repair32mm dia 125mm long sink coupling for Stainless steel sink complete all as specified and directed. |
| 96 | S&F in repair32mm dia Chromium plated brass coupling for WHB ccomplete all as specified and directed. |
| 97 | S&F in repair 32mm dia PVC waste pipe for WHB/sink with union complete all as specified and directed. |
| 98 | Taking down door/window frames with shutters with shutters (without taking off shutters from the frames)n.exc 1.5 sqm each complete all as specified and directed. |
| 99 | Taking down door/window frames with shutters exc 1.50 sqm but not exc 4.00 sqm each (without taking off shutters from frame) complete all as specified and directed. |
| 100 | Taking down shutters of any description exc 1 sq. m and n exc 2 sq. m each complete all as specified and directed. |
| 101 | S&F fibre glass reinforced plastic (FRP) door frame shall be three legged of cross section 90mmx45mm having single rebate of 32mmx15mm to receive shutter of 30mm thickness. The laminate door frame moulde with fire retardant grade unsaturated polyester resin and chopped mat.Door frame laminate shall be 2mm thick and shall be filled with suitable wooden block in all the three legs.The frame shall be covered with fibre glass from all sides. MS stay shall be provided at the bottom to steady the frame as per specification & a complete all as specified and directed. |
| 102 | S&F FRP door shutter 30mm thick glass fibre reinforced plastic (FRP) moulded door shutter of required colour and approved brand and manufacturer made with retardant grade unsaturated poyester resin moulded to 3mm thick FRP laminate for forming hollow rails and styles with wooden frame and suitable blocks of seasoned wood inside at required places for fixing of fittings, cast monolithically with 5mm thick FRP panels and confirming to IS 14856-2000 supply and fixing in the frame at site complete all as per specified and as directed. |
| 103 | S&F 100 mm Stainless steel butt hinges medium weight cold rolledfixed to doors with SS screws complete all as specified and directed. |
| 104 | S&F 150mm long aluminum anodized barrel tower bolt of extruded section complete all as specified and directed. |
| 105 | S&F 125mm long aluminium handles cast type anodised ISI Marked complete all as specified and directed. |
| 106 | Taking down rolling shutters incl hood and cover complete complete all as specified and directed. |
| 107 | M&L Framed work such as grills,gratings with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and directed. |
| 108 | M&L Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing conforming Fe.290.Gde-E-165complete all as specified and directed. |
| 109 | S&F 1.25 mm thick mild steel, plain, black sheet in wall cladding, steel gates and similar work, cut to size, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40 mm lap joints with riveted or welded seams, including bending or turning up, mitred angles, etc. as required complete all as specified and directed. |
| 110 | M&L for 2nd class hardwood plain, solid straight chowkats and frames, wrought, framed, rebated on the solid, rounded or chamfered, put together with glue, pinned at joints,including fixing in wall with screw/ hold fast/ cement concretecomplete all as specified and directed. |
| 111 | S&F 2nd class hardwood 35mm thick factory made Plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated complete all as specified and directed. |
| 112 | M&L for 35 mm thick 2nd class hard wood glazed and skelton door shutter,open rebated and prepared to receiveglass/guage etc. (with sash bar) edge of frames plain, chamfered or rounded, fitted with cut & mitred beads for securing glass /wire clothcomplete all as specified and directed. |
| 113 | S&F mild steel work as in hold fast of flat iron and similar articles conforming to Fe-410-0 complete all as specified and directed. |
| 114 | M&L for cement concrete 1:2:4 type B1 (using20mm graded stone aggregate) as in blocks for hold fast, coping,benching etc. including weathering, slightly rounded or chamfered angles or throating including form work to concrete surfaces complete all as specified and directed. |
| 115 | S&F 100 mm butt hinges medium weight cold rolled mild steel fixed with screws or welded complete all as specified and directed. |
| 116 | S&F anodised aluminium barrel tower bolt extruded sections 200 mm size complete all as specified and directed. |
| 117 | S&F 150mm long, Aluminium handles, cast type,anodised complete all as specified and directed. |
| 118 | S&F Aluminium alloy, anodised, sliding door bolt 250mm long with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed. |
| 119 | M&L for preparing previously untreated wood and wood based material of any description over 10cm width/girth and applying two coats of synthetic enamel paint over one coat of pink primer including preparation of surface complete all as specified and directed. |
| 120 | M&L for preparing previously untreated steel surfaces of any description over 10cm width/girth and applying two coats of synthetic enamel paint over one coat of redoxide primer including preparation of surface complete all as specified and directed. |
| 121 | Dismantling boarding and description (board/plywood) fixed in any position with screw, complete all as specified and directed. |
| 122 | S&F for 18-19mm Prelaminated particle board, exterior grade, prelaminated one side with decorative choice lamination & other side balancing white laminationas in CB shutter, lipping and necessary rebating for double shutter where required and polishing to lipping fixing complete to wall with fasteners complete all as specified and directed. |
| 123 | S & F in repair Continuous (piano) hinges, mild steel bright finished or electrogalvanised, width of flap (when open) 30 mm complete all as specified and directed. |
| 124 | S&F in repair Magnetic Catcher of standard size and quality as in kitchen cabinet complete all as specified and directed. |
| 125 | S&F in repair 40mm dia cupboard knobs fixed with nuts, screw and washer of mild steel, bright finished, complete all as specified and directed. |
| 126 | M&L for powder coating (minimum thickness of powder coating 50 micron) aluminium frame section for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and directed. |
| 127 | M&L for powder coating (minimum thickness of powder coating 50 micron) aluminium window and ventilator shutters, side hung/top hung type without sash bars, partly fixedtype, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, powder coated aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1 no.) complete all as specified and directed. |
| 128 | M&L powder coated aluminium 50 micron anodised three way track sliding windows of frame size 92 mm x 31.75 mm x 1.5 mm thickness weight of 1.07 Kg/m and of shutter size 40mm x 18 (with 9.00 mm interlocking legs) x 1.45 mm thicksection, including 95mm aluminium handle with spring lock, stainless steel wire cloth, 0.45 mm nominal dia of wire and average width of aperature 1.4 mm and fixed with steel wire stapples 5mm thick plain glass including necessary fitting/fixture/aluminium snap beads complete all as specified. (Note : Measurement shall be taken clear opening ie out to out of window frame as a whole including all fittings and fixtures and no extra shllabe apid separately. Cost of glass and wire cloth included herein complete all as specified and directed. |
| 129 | S&F in repair 20 mm dia stainless steel tube for curtain rod including pair of suitable S.S brackets and finials approved by GE including taking down old pelmet boxes with curtain rods complete all as specified and directed. |
| 130 | S&F in repair SScurtain rodbracket, holder,side wall bracket, wall to wall bracket suitable for 20mm bore curtain rod as per as per sample approved by Engr-In-Charge. |
| 131 | S&F in repair decorative curtain rod finials as per sample approved by Engr-In-Charge complete all as specified and directed. |
| 132 | S&F in repair aluminium door seal having Rubber strips (size 0.80m TO 1.2m and 50mm wide) complete all as specified and directed. |
| 133 | S&F in repair three lever interlock/centerlock for doors with set of 3 keys complete all as specified and directed. |
| 134 | S&F in repair 150mm steel handle for steel cupboard/almirah (inbuilt) complete all as specified and directed. (Sample will be approved by GE) |
| 135 | S&F in repair lock (four lever) for steel cupboard/almirah (inbuilt) complete all as specified and directed. (Sample will be approved by GE) |
| 136 | S&F in repairs 100 mm butt hinges medium weight cold rolled mild steel fixed with screws or welded complete all as specified and directed. |
| 137 | S&F in repairs 75 mm butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type C-21 fixed with screws or welded complete all as specified and directed. |
| 138 | S&F in repairs anodised aluminium barrel tower bolt extruded sections 150 mm size complete all as specified and directed. |
| 139 | S&F in repair 150mm long, Aluminium handles, cast type,anodised complete all as specified and directed. |
| 140 | S&F in repair 140mm floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor complete all as specified and directed. |
| 141 | S&F in repair Aluminium alloy, anodised, sliding door bolt 250mm long with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed. |
| 142 | S&F in repair 75 mm long aluminium anodised hasp and staple safety type including bolt to hinge plate fixed with screws complete all as specified and directed. |
| 143 | Hacking out old broken glass (any thickness,size,quality or description) from wooden frames metal frames or stone,concrete or brick surrounds,glazed with putty or fixed with beads complete all as specified and directed. |
| 144 | S & F 4mm thick Figured glass ,pin head type and glazing with rubber gasket in square n exc 0.5 sqm in each pane etc complete all as specified and directed. |
| 145 | S & F 4mm thick ordinary sheet glass fixed with clips and puttyor with aluminium snap beadingcomplete all as specified and directed. |
| 146 | S&F stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperature 1.40 mm and fixed with stainless steel wire staples, etc complete all as specified and directed. |
| 147 | S & F in repair stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40mm fixed with tinned tack or stainless steel wire staples including wooden beading complete all as specified and directed . |
| 148 | M & L in repair for40 mm upvc pipe fixed complete to walls, ceilings or in floors etc. including short lengths, with all pipe fittings such as ends, elbows,Y Shapeelbow,unions, tees, reducing tees, adoptors, sockets, plugs, hoseclips etc. and fixing to walls etc, complete with saddles (snap clips), wall clips, hooks,complete all as specified and directed.(The work shall be carried out in multistories bldgs upto 7th storeys and necessary sacffolding/safety measures be taken and no extra payments will be given for the scaffolding/safety measures.) complete all as specified and directed. |
| 149 | M&L in repair for 2nd class softwood fillets size exc 3 but n.exc 6 sqcm square, rectangular or triangular in section, bullnosed, splayed, chamfered or rounded on one edge or face clean sawn, secured with nails or brad complete all as specfied and directed. |
| 150 | S&F in repair 300mm, mild steel ordinary rat tail rod pattern springs including roller and roller plate complete all as specfied and directed. |
| 151 | Repairs to steel windows of size not exc 2.00 sqm by straightening, welding of damaged portions, greasing & oiling to make funcitional like easy for closing and opening etc complete all as specified and directed by Engineer-in-Charge |
| 152 | Repairs to inbuilt steel almirahs of size not exc 4.00 sqm by straightening, welding of damaged portions, greasing & oiling to make funcitional like easy for closing and opening etc complete all as specified and directed by Engineer-in-Charge |
| 153 | M&L for welding in repairs n. exc 2.5cm in length Thickness of Metal to be welded is not exc 6mm thick complete all as specified and directed by Engineer-in-Charge |
| 154 | Taking down existing steel rolling shutter incl hood cover pull & push type, not exc 12.00 sqm area of sides of clear opening and cleaning the sides of shutters ,suspension shafts, anti-guide channels and gearing all the moving parts rolling shutters and straightening rolling shafts and replacement of spare parts, locking arrangement, connecting rod, GI pipe, mild steel clips,bolts and nut as required and directed by Engr-in charge for smooth functioning of shutters and refixing the same including hood cover complete all as specified and directed by Engineer-in-Charge |
| 155 | M & L for full body vitrified tiles (sahara series of Orient bell or equivalent) of size (600 x 600) mm and approved shade and set and jointed in neat cement slurry and pointed in white or coloured cement to match the work including 15 thick screed bed in CM ( 1:6) complete all as specfied and directed. |
| 156 | M&L for glazed vitrified steps and riser tile (Inspire steps of Orient bell or equivalent) of approved shade punch, pattern and sizeandset and jointed in neat cement slurry and pointed in white or coloured cement to match the work including 15 thick screed bed in CM ( 1:6) complete all as specfied and directed. |
| 157 | M&L for Coloured Cement concrete Pre polishedchequered tiles 30cm X 30cm X 25mm thick machine pressed; set jointed and pointed in neat cement slurry in floors over 15mm thick screed bed in CM 1:6 and cut and pointed with white cement and pigment complete all as specified and directed. Make : Coral/Unistone |
| 158 | Providing and laying 60mm thick factory made chamfered edge cement concrete interlocking paver block of M-35 grade with approved colour, design & pattern as in footpath, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand and demolition of existing stone slabs complete all as specified and directed. Make : Coral/Unistone |
| 159 | Dismantling of plain or corrugated steel sheeting, any gauge, thickness, including Nainital orsimilarpattern roof coverings etc complete all as specified and directed. |
| 160 | S & F pre- painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified & directed. |
| 161 | All as per item no .160 above but except sheet. |
| 162 | Removal of Vegetation from wall and roof by cutting shrubs, wild growth/tree not exc 30cm girth and removing complete vegetation growth from walls including taking out roots from roof/brick walls and making good the disturbed surface with PCC 1:2:4 type B-0 or CM 1:3 as directed by Engr-in-charge and disposing the rubbish from site (MoD land) for upto eight storey block complete all as specified and directed |
| 163 | M & L for 75 mm thick plain cement concrete 1:3:6. type C-2 (using 40mm graded aggregate) as in plinth protection complete all as specified and directed. |
| 164 | M & L for Raking out joints/pointing to brick work or brick tiles laid flat on roofs in cement mortarandM&Lflush pointing in CM 1:4 to bricks laid flat or brick tiles in pavings, roof terracing etc complete all as specified and directed by Engineer-in-Charge |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
