Bharat Sanchar Nigam Limited-BSNL has published Tender For Miscellaneous Civil Repair Works Of Type-Iv Qtr No-1And2 And Replacement Of Water Supply Line Of Type-Ii Staff Quarters At Nalco Nagar, Angul.. Submission Date for this Tender is 08-05-2024. Building Work Tenders in angul Odisha. Bidders can get complete Tender details and download the document.
Sl. No. | Item Description |
1 | Sub-Head : Dismantling and Demolishing |
2 | Demolishing R.C.C. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 metres lead as per direction of Engineer - in- charge. |
3 | Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead : |
4 | Of area 3 sq. metres and below |
5 | Taking out doors, windows and clerestory window shutters (steel or wood) including stacking within 50 metres lead: |
6 | Of area 3 sq. metres and below |
7 | Sub-Head : Concrete Work |
8 | Providing and laying cement concrete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, sunken floor, etc., up to floor five level, excluding the cost of centering, shuttering and finishing : |
9 | 1:2:4 (1 Cement : 2 coarse sand derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources) |
10 | Sub-Head : Reinforced Cement Concrete |
11 | Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) : 3 graded stone aggregate 20 mm nominal size). |
12 | Smooth finishing of the exposed surface of R.C.C. work with 6 mm thick cement mortar 1:3 (1 Cement : 3 fine sand). |
13 | Sub-Head : Wood and PVC Work |
14 | Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length ( hold fast lugs or dash fastener shall be paid for separately). |
15 | Sal wood |
16 | Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows fixing with butt hinges of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge. (Note:- Butt hinges and necessary screws shall be paid separately) |
17 | Kasi/ Acacia wood |
18 | 30 mm thick shutters |
19 | Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick : |
20 | Float glass panes |
21 | 4 mm thick glass pane (weight not less than 10 kg/sqm) |
22 | Providing and fixing ISI marked oxidised M.S. sliding door bolts with nuts and screws etc. complete : |
23 | 250x16 mm |
24 | Providing and fixing ISI marked oxidised M.S. tower bolt black finish, (Barrel type) with necessary screws etc. complete : |
25 | 250x10 mm |
26 | 150x10 mm |
27 | Providing and fixing ISI marked oxidised M.S. handles conforming to IS:4992 with necessary screws etc. complete : |
28 | 100 mm |
29 | 75 mm |
30 | Providing and fixing factory made P.V.C. door frame of size 50x47 mm with a wall thickness of 5 mm, made out of extruded 5mm rigid PVC foam sheet, mitred at corners and joined with 2 Nos of 150 mm long brackets of 15x15 mm M.S. square tube, the vertical door frame profiles to be reinforced with 19x19 mm M.S. square tube of 19 gauge, EPDM rubber gasket weather seal to be provided through out the frame. The door frame to be fixed to the wall using M.S. screws of 65/100 mm size, complete as per manufacturer’s specification and direction of Engineer-in-Charge. |
31 | Providing and fixing factory made panel PVC door shutter consisting of frame made out of M.S. tubes of 19 gauge thickness and size of 19 mm x 19 mm for styles and 15x15 mm for top & bottom rails. M.S. frame shall have a coat of steel primers of approved make and manufacture. M.S. frame covered with 5 mm thick heat moulded PVC ‘C’ channel of size 30mm thickness, 70 mm width out of which 50 mm shall be flat and 20 mm shall be tapered in 45 degree angle on both side forming styles and 5 mm thick, 95 mm wide PVC sheet out of which 75 mm shall be flat and 20 mm shall be tapered in 45 degree on the inner side to form top and bottom rail and 115 mm wide PVC sheet out of which 75 mm shall be flat and 20 mm shall be tapered on both sides to form lock rail. Top, bottom and lock rails shall be provided both side of the panel. 10 mm (5 mm x 2 ) thick, 20 mm wide cross PVC sheet be provided as gap insert for top rail & bottom rail, paneling of 5 mm thick both side PVC sheet to be fitted in the M.S. frame welded/ sealed to the styles & rails with 7 mm (5 mm+2 mm) thick x 15 mm wide PVC sheet beading on inner side, and joined together with solvent cement adhesive. |
32 | An additional 5 mm thick PVC strip of 20 mm width is to be stuck on the interior side of the ‘C’ Channel using PVC solvent adhesive etc. complete as per direction of Engineer-in-charge, manufacturer’s specification & drawing. |
33 | 30 mm thick plain PVC door shutters. |
34 | Providing and fixing 12 mm thick panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick. |
35 | Marine plywood conforming to IS: 710 |
36 | Sub-Head : Steel Work |
37 | Providing and fixing carbon steel galvanised ( minimum coating 5 micron) dash fastener of 10 mm dia double threaded 6.8 grade (yield strength 480 N/mm2), counter sunk head, comprising of 10 mm dia polyamide PA 6 grade sleeve, including drilling of hole in frame , concrete/ masonry, etc. as per direction of Engineer-in-charge. |
38 | 10 x 120 mm |
39 | Sub-Head : Finishing |
40 | Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : |
41 | Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture. |
42 | Sub-Head : Repairs to Buildings |
43 | Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq. meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground , all complete as per directions of Engineer-In-Charge. |
44 | With cement mortar 1:4 (1cement: 4 coarse sand). |
45 | Dismantling 15 to 40 mm dia G.I. pipe including stacking of dismantled pipes (within 50 metres lead) as per direction of Engineerin-Charge. |
46 | Internal Work- Exposed on wall |
47 | Weeding out trees/ plants/ vegetations growth from wall, roof, chajja or any part of the building at any height by uprooting with application of acid for complete removal to prevent further growth all complete as per direction of Engineer-in-charge. |
48 | Provoding and fixing scaffolding system on the exterior side upto seven storey height made with best quality bamboo ballies 1.5 m centre to centre, horizontal and vertical ballies joining with best quality coir ropes, 38 mm thick local hard wood planks for working platform/ suspended polypropylene ropes with bamboo twined and maintaining it in a serviceable condition for the required duration as approved and removing it there after. The scaffolding system shall be stiffened with bracings, runners, connection with the building etc wherever required for inspection of work at required locations with essential safety features for the workmen etc complete as per direction of Engineer-in-charge. The elevational area of the scaffolding shall be measured for payment. The payment will be made once irrespective of duration of scaffolding. |
49 | Engaging labour for cleaning of open surface drains of any size, roof, terrace, chajjas at any floor at any height including all T & P, removal of debrishes, sullage and disposal all complete as per direction of Engineer-in-charge. |
50 | Cleaning of drainage manholes alongwith connecting sewer lines including removing the soil, waste, sludge deposits, earth, rubbish etc and disposal of same including flushing with sufficient water all complete as per direction of Engineer-in-charge. |
51 | Repairing of flushing cistern by replacing damaged parts such as float/ siphon etc. with new parts as per requirement all complete as per direction of Engineer-in-charge. |
52 | Sub-Head : Sanitary Installations |
53 | Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. |
54 | Semi rigid pipe |
55 | 32 mm dia |
56 | 40 mm dia |
57 | Providing and fixing PTMT Waste Coupling for wash basin and sink, of approved quality and colour. |
58 | Waste coupling 31 mm dia of 79 mm length and 62 mm breadth weighing not less than 45 gms. |
59 | Waste coupling 38 mm dia of 83 mm length and 77 mm breadth, weighing not less than 60 gms. |
60 | Sub-Head : Water Supply |
61 | Providing and fixing UPVCpipes, having thermal stability for hot & cold water supply, including all UPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step UPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. : Internal work - Exposed on wall |
62 | 20 mm nominal outer diameter pipe |
63 | 25 mm nominal outer diameter pipe |
64 | 32 mm nominal outer diameter pipe |
65 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings. This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge : External work |
66 | 32 mm nominal outer dia .Pipes. |
67 | Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) : |
68 | 40 mm nominal bore |
69 | Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (New work) |
70 | 40 mm nominal bore |
71 | Providing and fixing PTMT bib cock of approved quality and colour. |
72 | 15mm nominal bore, 86 mm long. Weighing not less than 88 gms. |
73 | Providing and fixing PTMT stop cock of approved quality and colour. |
74 | 20mm nominal bore, 89 mm long. Weighing not less than 88 gms. |
75 | Providing and fixing PTMT pillar cock of approved quality and colour . |
76 | 15mm nominal bore, 107 mm long. Weighing not less than 110 gms. |
77 | Providing and fixing Stainless Steel grating 0.60mm thick grating for floor traps complete as directed. |
78 | 100mm dia Circular with 25 mm waste hole |
79 | Providing and fixing PTMT angle stop cock 15 mm nominal bore. Weighing not less than 85 gms. |
80 | Providing and fixing PTMT swivelling shower, 15mm nominal bore. Weighing not less than 40 gms. |
81 | Providing and fixing PTMT soap Dish Holder having length of 138 mm, breadth 102 mm, height of 75 mm with concealed fitting arrangements. Weighing not less than 106 gms. |
82 | Providing and fixing unplasticised P.V.C. connection pipe with PTMT Nuts, collar and bush of approved quality and colour. |
83 | 15 mm nominal bore with 45 cm length. |
84 | Cutting holes up to 30x30 cm in walls including making good the same: |
85 | With common burnt clay F.P.S. (non modular) bricks. |
86 | Providing and fixing CPVC Union in CPVC pipe line including cutting the pipe etc complete as per direction of Engineer-in-charge |
87 | 25 mm diameter |
88 | 32 mm diameter |
89 | Providing and fixing CPVC Ball valve approved quality with handle in CPVC pipe line etc complete as per direction of Engineer-in-charge: |
90 | 25 mm diameter |
91 | 32 mm diameter |
92 | Sub-Head : NEWTECHNOLOGIES AND MATERIALS |
93 | Providing, mixing and applying bonding coat of approved adhesive on chipped portion of RCC as per specifications and direction of Engineer-In-charge complete in all respect. |
94 | Epoxy bonding adhesive having coverage 2.20 sqm/kg of approved make. |
95 | Sub-Head : Credit Items |
96 | Deduct for taking into possession the unserviceable dismantled materials including carriage: |
97 | Gun metal gate valves 25 mm to 40 mm |
98 | Brass/ CP brass bib cock/ stop cock/ angle cock/ pillar tap |
99 | GI pipes with fittings |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail