Bharat Sanchar Nigam Limited-BSNL has published Tender For Miscellaneous Day To Day Repair And Maintenance Works To The Staff Quarters, T.E. Buildings Etc. In Noida Ba During 2023-24 (Phase-2).. Submission Date for this Tender is 10-05-2024. Building Work Tenders in noida Uttar Pradesh. Bidders can get complete Tender details and download the document.
Sl. No. | Item Description |
1 | All items Contained in Delhi schedule of Rates 2023 for Civil works with Upto date correction slips. Rates: As per DSR-2023 (Read with all correction slips issued till the date of issue of work order) |
2 | P/F fly proof galvanized M.S. wire gauge to window / door shutter using galvanized. M.S. wire gauge with avg. width of aperture 1.4mm in both directions with wire of dia. 0.63 mm with required nails, screws etc. complete as per direction of Engineer-in-Charge. |
3 | Providing and fixing bright finished brass pivot to aluminum door i/c removing unserviceable pivot existing at site, fixing new pivot with required screws etc. All complete as per direction of Engineer-in-Charge. |
4 | Repairs to side hung steel window leaves of size 450x1200mm approx. against improper functioning including replacing the existing faulty hinges by box type hinges, making good the jambs and soffits for free movement of window leaves complete as per of direction Engineer-in-Charge. |
5 | Removal of chockage of floor trap, Nahani trap, water closet and associated C.I. pipe and bend to effect smooth flow of wastes by pressure pushing, flexible wire and taking out refuses and dispose off etc. all complete as per direction of Engineer-in-Charge. |
6 | Cleaning of all manhole/chambers of all size in the compound including adjoining sewer line & complete removal of earth, silt slush, brick bats, garbage"s and other refuses, disposing off the same to the dumping site in township complete as per the direction of the Engineer - in - charge . ( Sweeping cleaning of manhole / chamber shall be done once in a three month normally but the frequency may be changed as per site requirement ). Note : Rate including the cost of cleaning of manhole / chamber and its adjoining sewer line, dewatering, if required including removing of manhole/chamber cover and keeping the same back in position will be made for each cleaning of manhole. |
7 | Labour work for attending and rectifying day to day plumbing maintenance complaints by engaging a plumberfor one month, for various buildings including technical building and staff quarters. The rate is inclusive of all T&P required, scaffoldings, jhula, ladder etc., and all necessary safety measures for working on external surface. All materials required for maintenance works shall be paid in separate item. The complaints shall be attended at once during working hours or at any time as per requirement. No transportation charges will be paid for attending the complaints at various locations under Noida BA. All complete as per direction of Engineer-in-Charge. |
8 | Labour (Beldar) Supply for miscellaneous works such as cleaning of terrace, help to plumber etc. on daily basis as per requirement and direction of Engineer-in-Charge. The rate is inclusive of all T&P required, scaffoldings, jhula, ladder etc., and all necessary safety measures for working on external surface. All materials required for maintenance works shall be paid in separate item. The complaints shall be attended at once during working hours or at any time as per requirement. No transportation charges will be paid for attending the complaints at various locations under Noida SSA |
9 | Credit of old un- serviceable materials recovered from dismantling / demolishing from work: ( NOTE :It shall be ensured that material are in broken / damaged and completely unserviceable condition for which test check shall be carried out by the Engineer - in -charge before effecting payment )(a) Brass / CP Brass items such as bib cock, stop cock, pillar cock gate valve and other fitting etc. |
10 | Credit of old un- serviceable materials recovered from dismantling / demolishing from work: ( NOTE :It shall be ensured that material are in broken / damaged and completely unserviceable condition for which test check shall be carried out by the Engineer - in -charge before effecting payment )(a) Old Unserviceable C.I./G.I./M.S. Items |
11 | Credit of old un- serviceable materials recovered from dismantling / demolishing from work: ( NOTE :It shall be ensured that material are in broken / damaged and completely unserviceable condition for which test check shall be carried out by the Engineer - in -charge before effecting payment )(a) Old Unserviceable Aluminium Items |
12 | Credit of old un- serviceable materials recovered from dismantling / demolishing from work: ( NOTE :It shall be ensured that material are in broken / damaged and completely unserviceable condition for which test check shall be carried out by the Engineer - in -charge before effecting payment )(a) Old Unserviceable aluminium floor spring |
13 | Credit of old un- serviceable materials recovered from dismantling / demolishing from work: ( NOTE :It shall be ensured that material are in broken / damaged and completely unserviceable condition for which test check shall be carried out by the Engineer - in -charge before effecting payment )(a) Old Unserviceable wooden door shutters i/c fittings |
14 | Credit of old un- serviceable materials recovered from dismantling / demolishing from work: ( NOTE :It shall be ensured that material are in broken / damaged and completely unserviceable condition for which test check shall be carried out by the Engineer - in -charge before effecting payment )(a) P.V.C. Items, Water storage Tanks |
15 | Credit for recovery of old serviceable bricks recovered after dismantling:(a) Old Bricks |
16 | Taking out existing aluminium door shutter, repair by adjusting floor spring, brass pivot necessary screws etc. all complete as per the direction of the Engineer-in-charge. |
17 | Providing and fixing 110X110 mm P.V.C. P Trap of good and approved quality for Indian type W.C seat, fixing it after dismantling existing SCI/P.V.C. trap and W.C seat and fixing in position by embedding in C.C 1:2:4 ( 1 Cement: 2 Coarse Sand : 4 Graded stone aggregate 10 mm nominal size) all complete as per direction of Engineer-in-Charge. |
18 | Providing and applying cement slurry mixed with water proofing cement compound consisting of applying slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound @ 0.253 kg/ sqm. all complete as per the direction of Engineer-in-Charge. |
19 | Hiring of Electric Welding Machine at site for miscellaneous repairs including carriage, electrode etc. for a full working day with one assistant black smith and one beldar all complete as per direction of Engineer-in-charge. |
20 | Providing and fixing precast RCC Gully trap cover of approved quality light duty of size 300 x 300 mm including fixing with cement mortar 1:6 (1 Cement: 6 Coarse Sand) all complete as per the direction of Engineer-in-Charge |
21 | Providing and fixing Stainless Steel fancy curtain rod 20 nn dia with necessary brackets, nuts, bolts, screws, designer end caps etc. complete as per direction of Engineer-in-Charge: |
22 | Providing at site of work various sanitary/ water supply fittings/ items of approved and ISI quality as decided by the Engineer-in-Charge for day to day maintenance works. (Note: Labour shall be covered in the relevant agreement item.)(a) P.V.C. 10 Litre White, low level flushing cistern with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete. |
23 | Providing at site of work various sanitary/ water supply fittings/ items of approved and ISI quality as decided by the Engineer-in-Charge for day to day maintenance works. (Note: Labour shall be covered in the relevant agreement item.)(a) White solid plastic seat with lid for pedestal type W.C pan complete. |
24 | Providing at site of work various sanitary/ water supply fittings/ items of approved and ISI quality as decided by the Engineer-in-Charge for day to day maintenance works. (Note: Labour shall be covered in the relevant agreement item.)(a) 600x450 mm size 5 mm thick beveled edge mirror of superior glass |
25 | Providing at site of work various sanitary/ water supply fittings/ items of approved and ISI quality as decided by the Engineer-in-Charge for day to day maintenance works. (Note: Labour shall be covered in the relevant agreement item.)(a) White Vitreous china flat back wash basin of size 550x400 mm. |
26 | Providing at site of work various sanitary/ water supply fittings/ items of approved and ISI quality as decided by the Engineer-in-Charge for day to day maintenance works. (Note: Labour shall be covered in the relevant agreement item.)(a) White Vitreous china flat back wash basin of size 450x300 mm. |
27 | Providing at site of work various sanitary/ water supply fittings/ items of approved and ISI quality as decided by the Engineer-in-Charge for day to day maintenance works. (Note: Labour shall be covered in the relevant agreement item.)(a) White vitreous china Orissa pattern W.C pan of size 500x400 mm. |
28 | Providing at site of work various sanitary/ water supply fittings/ items of approved and ISI quality as decided by the Engineer-in-Charge for day to day maintenance works. (Note: Labour shall be covered in the relevant agreement item.)(a) Flexible P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete.(i) 32 mm dia. |
29 | Providing at site of work various sanitary/ water supply fittings/ items of approved and ISI quality as decided by the Engineer-in-Charge for day to day maintenance works. (Note: Labour shall be covered in the relevant agreement item.)(a) Flexible P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete.(i) 40 mm dia. |
30 | Providing at site of work various sanitary/ water supply fittings/ items of approved and ISI quality as decided by the Engineer-in-Charge for day to day maintenance works. (Note: Labour shall be covered in the relevant agreement item.)(a) PTMT Waste coupling for wash basin and sink, of approved quality and colour.(i) 31 mm dia. |
31 | Providing at site of work various sanitary/ water supply fittings/ items of approved and ISI quality as decided by the Engineer-in-Charge for day to day maintenance works. (Note: Labour shall be covered in the relevant agreement item.)(a) PTMT Waste coupling for wash basin and sink, of approved quality and colour.(i) 38 mm dia. |
32 | Providing at site of work various sanitary/ water supply fittings/ items of approved and ISI quality as decided by the Engineer-in-Charge for day to day maintenance works. (Note: Labour shall be covered in the relevant agreement item.)(a) Internal fitting kit, complete for 10 litre low level P.V.C. flushing cistern |
33 | Providing at site of work various sanitary/ water supply fittings/ items of approved and ISI quality as decided by the Engineer-in-Charge for day to day maintenance works. (Note: Labour shall be covered in the relevant agreement item.)(a) Washing Jet spray.(i) PTMT (Prayag or equivalent) with 1.0 metre long tube. |
34 | Providing at site of work various sanitary/ water supply fittings/ items of approved and ISI quality as decided by the Engineer-in-Charge for day to day maintenance works. (Note: Labour shall be covered in the relevant agreement item.)(a) C.I brackets for wash basin/ sink. |
35 | Providing at site of work various sanitary/ water supply fittings/ items of approved and ISI quality as decided by the Engineer-in-Charge for day to day maintenance works. (Note: Labour shall be covered in the relevant agreement item.)(a) C.P/ P.V.C. bend for flushing cistern.(i) P.V.C. bend 32 mm dia. |
36 | Providing at site of work various sanitary/ water supply fittings/ items of approved and ISI quality as decided by the Engineer-in-Charge for day to day maintenance works. (Note: Labour shall be covered in the relevant agreement item.)(a) C.P/ P.V.C. bend for flushing cistern.(i) C.P flush bend 32 mm dia. |
37 | Providing at site of work various sanitary/ water supply fittings/ items of approved and ISI quality as decided by the Engineer-in-Charge for day to day maintenance works. (Note: Labour shall be covered in the relevant agreement item.)(a) G.I. Union.(i) 15 mm nominal bore. |
38 | Providing at site of work various sanitary/ water supply fittings/ items of approved and ISI quality as decided by the Engineer-in-Charge for day to day maintenance works. (Note: Labour shall be covered in the relevant agreement item.)(a) G.I. Nipple, 15 mm nominal bore.(i) Up to 75 mm long. |
39 | Providing at site of work various sanitary/ water supply fittings/ items of approved and ISI quality as decided by the Engineer-in-Charge for day to day maintenance works. (Note: Labour shall be covered in the relevant agreement item.)(a) G.I. Socket.(i) 15 mm nominal bore. |
40 | Providing at site of work various sanitary/ water supply fittings/ items of approved and ISI quality as decided by the Engineer-in-Charge for day to day maintenance works. (Note: Labour shall be covered in the relevant agreement item.)(a) G.I. Socket.(i) 20 mm nominal bore. |
41 | Providing at site of work various sanitary/ water supply fittings/ items of approved and ISI quality as decided by the Engineer-in-Charge for day to day maintenance works. (Note: Labour shall be covered in the relevant agreement item.)(a) G.I. Elbow.(i) 15 mm nominal bore. |
42 | Providing and fixing fancy curtain rod with necessary brackets, nuts, bolts, screws, designer end caps etc. complete as per direction of Engineer-in-Charge:(a) P.V.C. cover for P.V.C. water storage tanks.(i) For tanks below 500 litre capacity. |
43 | Providing at site of work various sanitary/ water supply fittings/ items of approved and ISI quality as decided by the Engineer-in-Charge for day to day maintenance works. (Note: Labour shall be covered in the relevant agreement item.)(a) P.V.C. cover for P.V.C. water storage tanks.(i) For tanks 500 litres & Upto 1000 litre capacity. |
44 | Providing at site of work various sanitary/ water supply fittings/ items of approved and ISI quality as decided by the Engineer-in-Charge for day to day maintenance works. (Note: Labour shall be covered in the relevant agreement item.)(a) Unplasticised P.V.C. Connection pipe with PTMT nuts, collars and bush of approved quality and colour.(i) 15 mm nominal bore and 45 cm long. |
45 | Providing at site of work various sanitary/ water supply fittings/ items of approved and ISI quality as decided by the Engineer-in-Charge for day to day maintenance works. (Note: Labour shall be covered in the relevant agreement item.)(a) PTMT Pillar cock of approved quality and colour.(i) 15 mm nominal bore, 107 mm long, weighing not less than 110 gms. |
46 | Providing at site of work various sanitary/ water supply fittings/ items of approved and ISI quality as decided by the Engineer-in-Charge for day to day maintenance works. (Note: Labour shall be covered in the relevant agreement item.)(a) PTMT bib cock of approved quality and colour.(i) 15 mm nominal bore, 86 mm long, weighing not less than 88 gms. |
47 | Providing at site of work various sanitary/ water supply fittings/ items of approved and ISI quality as decided by the Engineer-in-Charge for day to day maintenance works. (Note: Labour shall be covered in the relevant agreement item.)(a) PTMT stop cock of approved quality and colour.(i) 15 mm nominal bore, 86 mm long, weighing not less than 88 gms. |
48 | Providing at site of work various sanitary/ water supply fittings/ items of approved and ISI quality as decided by the Engineer-in-Charge for day to day maintenance works. (Note: Labour shall be covered in the relevant agreement item.)(a) PTMT grating of approved quality and colour.(i) Circular type, 100 mm nominal dia. |
49 | Providing at site of work various sanitary/ water supply fittings/ items of approved and ISI quality as decided by the Engineer-in-Charge for day to day maintenance works. (Note: Labour shall be covered in the relevant agreement item.)(a) PTMT Ball cock of approved quality, colour and make complete with Epoxy coated aluminum rod with L.P/ H.P.D plastic ball.(i) 15mm nominal bore, 105 mm long, weighing not less than 138 gms. |
50 | Providing at site of work various sanitary/ water supply fittings/ items of approved and ISI quality as decided by the Engineer-in-Charge for day to day maintenance works. (Note: Labour shall be covered in the relevant agreement item.)(a) PTMT Ball cock of approved quality, colour and make complete with Epoxy coated aluminum rod with L.P/ H.P.D plastic ball.(i) 20 mm nominal bore, 120 mm long, weighing not less than 198 gms. |
51 | Providing at site of work various sanitary/ water supply fittings/ items of approved and ISI quality as decided by the Engineer-in-Charge for day to day maintenance works. (Note: Labour shall be covered in the relevant agreement item.)(a) PTMT Ball cock of approved quality, colour and make complete with Epoxy coated aluminum rod with L.P/ H.P.D plastic ball.(i) 25 mm nominal bore, 152 mm long, weighing not less than 440 gms. |
52 | Providing at site of work various sanitary/ water supply fittings/ items of approved and ISI quality as decided by the Engineer-in-Charge for day to day maintenance works. (Note: Labour shall be covered in the relevant agreement item.)(a) PTMT Swivelling shower, 15 mm nominal bore, weighing not less than 40 gms. |
53 | Providing at site of work various sanitary/ water supply fittings/ items of approved and ISI quality as decided by the Engineer-in-Charge for day to day maintenance works. (Note: Labour shall be covered in the relevant agreement item.)(a) PTMT Extension nipple for water tank pipe, fittings of approved quality and colour.(i) 15 mm nominal bore, weighing not less than 32 gms. |
54 | Providing at site of work various sanitary/ water supply fittings/ items of approved and ISI quality as decided by the Engineer-in-Charge for day to day maintenance works. (Note: Labour shall be covered in the relevant agreement item.)(a) PTMT Extension nipple for water tank pipe, fittings of approved quality and colour.(i) 20 mm nominal bore, weighing not less than 40 gms. |
55 | Providing at site of work various sanitary/ water supply fittings/ items of approved and ISI quality as decided by the Engineer-in-Charge for day to day maintenance works. (Note: Labour shall be covered in the relevant agreement item.)(a) PTMT Extension nipple for water tank pipe, fittings of approved quality and colour.(i) 25 mm nominal bore, weighing not less than 48 gms. |
56 | Providing at site of work various sanitary/ water supply fittings/ items of approved and ISI quality as decided by the Engineer-in-Charge for day to day maintenance works. (Note: Labour shall be covered in the relevant agreement item.)(a) C.P. Brass bib cock.(i) 15 mm nominal bore. |
57 | Providing at site of work various sanitary/ water supply fittings/ items of approved and ISI quality as decided by the Engineer-in-Charge for day to day maintenance works. (Note: Labour shall be covered in the relevant agreement item.)(a) C.P. Brass bib cock 2-in-1.(i) 15 mm nominal bore. |
58 | Providing at site of work various sanitary/ water supply fittings/ items of approved and ISI quality as decided by the Engineer-in-Charge for day to day maintenance works. (Note: Labour shall be covered in the relevant agreement item.)(a) C.P brass long body bib cock.(i) 15 mm nominal bore. |
59 | Providing at site of work various sanitary/ water supply fittings/ items of approved and ISI quality as decided by the Engineer-in-Charge for day to day maintenance works. (Note: Labour shall be covered in the relevant agreement item.)(a) C.P brass pillar cock.(i) 15 mm nominal bore. |
60 | Providing at site of work various sanitary/ water supply fittings/ items of approved and ISI quality as decided by the Engineer-in-Charge for day to day maintenance works. (Note: Labour shall be covered in the relevant agreement item.)(a) CPVC Pipes.(i) 20 mm outer dia. |
61 | Providing at site of work various sanitary/ water supply fittings/ items of approved and ISI quality as decided by the Engineer-in-Charge for day to day maintenance works. (Note: Labour shall be covered in the relevant agreement item.)(a) CPVC Pipes.(i) 25 mm outer dia pipes. |
62 | Providing at site of work various sanitary/ water supply fittings/ items of approved and ISI quality as decided by the Engineer-in-Charge for day to day maintenance works. (Note: Labour shall be covered in the relevant agreement item.)(a) CPVC Pipes.(i) 32 mm outer dia pipes. |
63 | Providing at site of work various sanitary/ water supply fittings/ items of approved and ISI quality as decided by the Engineer-in-Charge for day to day maintenance works. (Note: Labour shall be covered in the relevant agreement item.)(a) CPVC Pipes.(i) 40 mm outer dia pipes. |
64 | Providing at site of work various sanitary/ water supply fittings/ items of approved and ISI quality as decided by the Engineer-in-Charge for day to day maintenance works. (Note: Labour shall be covered in the relevant agreement item.)(a) CPVC Union of supreme or equivalent make.(i) for 20 mm outer dia pipes. |
65 | Providing at site of work various sanitary/ water supply fittings/ items of approved and ISI quality as decided by the Engineer-in-Charge for day to day maintenance works. (Note: Labour shall be covered in the relevant agreement item.)(a) CPVC Union of supreme or equivalent make.(i) For 25 mm outer dia pipes. |
66 | Providing at site of work various sanitary/ water supply fittings/ items of approved and ISI quality as decided by the Engineer-in-Charge for day to day maintenance works. (Note: Labour shall be covered in the relevant agreement item.)(a) CPVC Union of supreme or equivalent make.(i) For 32 mm outer dia pipes. |
67 | Providing at site of work various sanitary/ water supply fittings/ items of approved and ISI quality as decided by the Engineer-in-Charge for day to day maintenance works. (Note: Labour shall be covered in the relevant agreement item.)(a) CPVC Union of supreme or equivalent make.(i) For 40 mm outer dia pipes. |
68 | Providing at site of work various sanitary/ water supply fittings/ items of approved and ISI quality as decided by the Engineer-in-Charge for day to day maintenance works. (Note: Labour shall be covered in the relevant agreement item.)(a) CPVC Ball valves.(i) 20 mm nominal bore. |
69 | Providing at site of work various sanitary/ water supply fittings/ items of approved and ISI quality as decided by the Engineer-in-Charge for day to day maintenance works. (Note: Labour shall be covered in the relevant agreement item.)(a) CPVC Ball valves.(i) 25 mm nominal bore. |
70 | Providing at site of work various sanitary/ water supply fittings/ items of approved and ISI quality as decided by the Engineer-in-Charge for day to day maintenance works. (Note: Labour shall be covered in the relevant agreement item.)(a) CPVC Ball valves.(i) 32 mm nominal bore |
71 | Providing at site of work various sanitary/ water supply fittings/ items of approved and ISI quality as decided by the Engineer-in-Charge for day to day maintenance works. (Note: Labour shall be covered in the relevant agreement item.)(a) CPVC Ball valves.(i) 40 mm nominal bore |
72 | Providing at site of work various sanitary/ water supply fittings/ items of approved and ISI quality as decided by the Engineer-in-Charge for day to day maintenance works. (Note: Labour shall be covered in the relevant agreement item.)(a) C.P brass towel rod of good and approved quality of 600x20 mm |
73 | Providing at site of work various sanitary/ water supply fittings/ items of approved and ISI quality as decided by the Engineer-in-Charge for day to day maintenance works. (Note: Labour shall be covered in the relevant agreement item.)(a) CPVC Female thread elbow of Size 20x15 mm |
74 | Providing at site of work various sanitary/ water supply fittings/ items of approved and ISI quality as decided by the Engineer-in-Charge for day to day maintenance works. (Note: Labour shall be covered in the relevant agreement item.)(a) CPVC Female thread Tee of Size 20x15 mm |
75 | Providing at site of work various sanitary/ water supply fittings/ items of approved and ISI quality as decided by the Engineer-in-Charge for day to day maintenance works. (Note: Labour shall be covered in the relevant agreement item.)(a) P.V.C. clamp for 20 mm dia CP.V.C. pipes |
76 | Providing at site of work various sanitary/ water supply fittings/ items of approved and ISI quality as decided by the Engineer-in-Charge for day to day maintenance works. (Note: Labour shall be covered in the relevant agreement item.)(a) CPVC Female thread Tee of Size 20x20 mm |
77 | Providing at site of work various sanitary/ water supply fittings/ items of approved and ISI quality as decided by the Engineer-in-Charge for day to day maintenance works. (Note: Labour shall be covered in the relevant agreement item.)(a) CPVC elbow of Size 32x32 mm |
78 | Providing at site of work various sanitary/ water supply fittings/ items of approved and ISI quality as decided by the Engineer-in-Charge for day to day maintenance works. (Note: Labour shall be covered in the relevant agreement item.)(a) CPVC elbow of Size 25x25 mm |
79 | Providing at site of work various sanitary/ water supply fittings/ items of approved and ISI quality as decided by the Engineer-in-Charge for day to day maintenance works. (Note: Labour shall be covered in the relevant agreement item.)(a) CPVC elbow of Size 20x20 mm |
80 | Providing at site of work various sanitary/ water supply fittings/ items of approved and ISI quality as decided by the Engineer-in-Charge for day to day maintenance works. (Note: Labour shall be covered in the relevant agreement item.)(a) CPVC Tee of Size 25x25x25 mm |
81 | Providing at site of work various sanitary/ water supply fittings/ items of approved and ISI quality as decided by the Engineer-in-Charge for day to day maintenance works. (Note: Labour shall be covered in the relevant agreement item.)(a) CPVC Tee of Size 20x20x20 mm |
82 | Providing at site of work various sanitary/ water supply fittings/ items of approved and ISI quality as decided by the Engineer-in-Charge for day to day maintenance works. (Note: Labour shall be covered in the relevant agreement item.)(a) CPVC Socket of Size 20x20 mm |
83 | Providing at site of work various sanitary/ water supply fittings/ items of approved and ISI quality as decided by the Engineer-in-Charge for day to day maintenance works. (Note: Labour shall be covered in the relevant agreement item.)(a) CPVC Socket of Size 25x25 mm |
84 | Providing at site of work various sanitary/ water supply fittings/ items of approved and ISI quality as decided by the Engineer-in-Charge for day to day maintenance works. (Note: Labour shall be covered in the relevant agreement item.)(a) G.I. Elbow. 50 mm nominal bore. |
85 | Providing at site of work various sanitary/ water supply fittings/ items of approved and ISI quality as decided by the Engineer-in-Charge for day to day maintenance works. (Note: Labour shall be covered in the relevant agreement item.)(a) UPVC Union of supreme or equivalent make. i) for 75 mm dia pipes. |
86 | Providing at site of work various sanitary/ water supply fittings/ items of approved and ISI quality as decided by the Engineer-in-Charge for day to day maintenance works. (Note: Labour shall be covered in the relevant agreement item.)(a) UPVC Socket of supreme or equivalent make. (i) for 75 mm dia pipes. |
87 | Providing at site of work various sanitary/ water supply fittings/ items of approved and ISI quality as decided by the Engineer-in-Charge for day to day maintenance works. (Note: Labour shall be covered in the relevant agreement item.)(a) UPVC Socket of supreme or equivalent make. (i) for 110 mm dia pipes. |
88 | Providing at site of work various sanitary/ water supply fittings/ items of approved and ISI quality as decided by the Engineer-in-Charge for day to day maintenance works. (Note: Labour shall be covered in the relevant agreement item.)(a) Clampfor P.V.C. Pipes. (i) for 110 mm dia pipes. |
89 | Providing at site of work various sanitary/ water supply fittings/ items of approved and ISI quality as decided by the Engineer-in-Charge for day to day maintenance works. (Note: Labour shall be covered in the relevant agreement item.)(a) Clampfor P.V.C. Pipes. (i) for 75 mm dia pipes. |
90 | Providing at site of work various sanitary/ water supply fittings/ items of approved and ISI quality as decided by the Engineer-in-Charge for day to day maintenance works. (Note: Labour shall be covered in the relevant agreement item.)(a) Brass Spendle / face for brass / CP brass Bib Cock/Angle Valves/Pillar Cocks etc. |
91 | Providing and fixing 75X75 mm P.V.C. P Trap of good and approved quality for Indian type W.C seat, fixing it after dismantling existing SCI/P.V.C. trap and W.C seat and fixing in position by embedding in C.C 1:2:4 ( 1 Cement: 2 Coarse Sand : 4 Graded stone aggregate 10 mm nominal size) all complete as per direction of Engineer-in-Charge. |
92 | Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means viz. tractor trolley of minium capacity 50 Cu.ft. including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all loads including all lifts involved. |
93 | Providing and fixing door seal of approved quality with screws all complete as per direction of Engineer in charge. |
94 | Taking out the large peepal tree at roof and walls including root which was embedded in roof at all heights by demolishing the roof tiles or brick wall if required including disposal the tree material and malba out of municipal limit including repair of roof with cement concrete 1:2:4 (1 cement: 2 coarse sand: 4 graded stone aggregate 20 mm nominal size) all complete as per direction of engineer-in-charge.(The item included all labour,T&P,material in above operation |
95 | Providing and fixing 0.5mm thickaluminium sheet onwooden doorshutter with screw, nails etc all complete as per direction of Engineer in charge |
96 | Repair of curtain rod by providing and fixing missing parts such as brackets, side lattoo, pvc sleevs screws etc all complete as per directin of Enginee in charge. |
97 | Providing and fixing 20 mm PVC coated M.S curtain rod with brackets sleeves and side fixtures etc. all complete as per direction of engineer in charge.( Length of curtain rod shall be measured for payment) |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail