Bharat Sanchar Nigam Limited-BSNL has published Tender For Miscellaneous Day To Day Repair And Maintenance Works Of Staff Quarters, T.E. Buildings, I.Q. Etc, In Main T.E. Compound Amu Road, Cto Compound And Avantika, Under Aligarh Oa During 2023-24 (Phase-1).. Submission Date for this Tender is 10-05-2024. Building Work Tenders in aligarh Uttar Pradesh. Bidders can get complete Tender details and download the document.
Sl. No. | Item Description |
1 | All items Contained in Delhi schedule of Rates 2023 for Civil works with Upto date correction slips. As per DSR-2023 (Read with all correction slips issued till the date of issue of work order) |
2 | P/F fly proof galvanized M.S. wire gauge to window / door shutter using galvanized. M.S. wire gauge with avg. width of aperture 1.4mm in both directions with wire of dia. 0.63 mm with required nails, screws etc. complete as per direction of EIC. |
3 | Providing and fixing bright finished brass pivot to aluminum door i/c removing unserviceable pivot existing at site, fixing new pivot with required screws etc. All complete as per direction of E-I-C. |
4 | Repairs to side hung steel window leaves of size 450x1200mm approx. against improper functioning including replacing the existing faulty hinges by box type hinges, making good the jambs and soffits for free movement of window leaves complete as per of direction Engineer in charge. |
5 | Removal of chockage of floor trap, Nahani trap, water closet and associated C.I.pipe and bend to effect smooth flow of wastes by pressure pushing, flexible wire and taking out refuses and dispose off etc. all complete as per direction of Engineer in charge. |
6 | Cleaning of all manhole/chambers of all size in the compound,&complete removal of earth, silt slush, brick bats, garbage"s and other refuses, disposing off the same to the dumping site in township complete as per the direction of the Engineer - in - charge . ( Sweeping cleaning of manhole / chamber shall be done once in a three month normally but the frequency may be changed as per site requirement ). Note : Rate including the cost of cleaning of manhole / chamber, dewatering, if required including removing of manhole/chamber cover and keeping the same back in position will be made for each cleaning of manhole. |
7 | Cleaning of open surface drain of cross sectional area up to 0.10 Sqm including complete removal of earth, silt, slush, brick bats, garbage and other refuses, disposing of the same to the dumping ground in township all complete as per direction of Engineer in charge. |
8 | Cleaning of sewer line of S.W pipe/R.C.C pipe including complete, removal of earth, silt, slush, brick bats, garbage and other refuses, disposing off the same to dumping site in township complete as per the direction of the Engineer-in- Charge. Note : Rate including the cost of cleaning of manhole / chamber, dewatering, if required including removing of manhole/chamber cover and keeping the same back in position will be made for each cleaning |
9 | Supply of a labour for miscellaneous civil works in T.E. and staff quarters compound of BSNL such as uprooting vegitation, leveling the earth, cleaning the roofs & khurras, gully trap minor urgent civil works whenever required all complete as per direction of engineer -in - charge (The item included all labour, T&P required) |
10 | Credit of old un- serviceable materials recovered from dismantling / demolishing from work: ( NOTE :It shall be ensured that material are in broken / damaged and completely unserviceable condition for which test check shall be carried out by the Engineer - in -charge before effecting payment ) (a)Brass / CP Brass items such as bib cock, stop cock ,pillar cock gate valve and other fitting etc. |
11 | Credit of old un- serviceable materials recovered from dismantling / demolishing from work: ( NOTE :It shall be ensured that material are in broken / damaged and completely unserviceable condition for which test check shall be carried out by the Engineer - in -charge before effecting payment ) (b)Old Unserviceable C.I./G.I./M.S. Items |
12 | Credit of old un- serviceable materials recovered from dismantling / demolishing from work: ( NOTE :It shall be ensured that material are in broken / damaged and completely unserviceable condition for which test check shall be carried out by the Engineer - in -charge before effecting payment )(c )Old Unserviceable Aluminium Items |
13 | Credit of old un- serviceable materials recovered from dismantling / demolishing from work: ( NOTE :It shall be ensured that material are in broken / damaged and completely unserviceable condition for which test check shall be carried out by the Engineer - in -charge before effecting payment ) (d) Old Unserviceable wooden door shutters |
14 | Credit of old un- serviceable materials recovered from dismantling / demolishing from work: ( NOTE :It shall be ensured that material are in broken / damaged and completely unserviceable condition for which test check shall be carried out by the Engineer - in -charge before effecting payment ) (e ) PVC Items, Water storage Tanks |
15 | Credit for recovery of old serviceable bricks recovered after dismantling: (a) Old Bricks |
16 | Taking out existing aluminium door shutter, repair by adjusting floor spring, brass pivot necessary screws etc. all complete as per the direction of the Engineer-in-charge. |
17 | Providing and fixing 110X110 mm P.V.C. P Trap of good and approved quality for Indian type W.C seat, fixing it after dismantling existing SCI/P.V.C. trap and W.C seat and fixing in position by embedding in C.C 1:2:4 ( 1 Cement: 2 Coarse Sand : 4 Graded stone aggregate 10 mm nominal size) all complete as per direction of Engineer-in-Charge. |
18 | Hiring of Electric Welding Machine at site for miscellaneous repairs including carriage, electrode etc. for a full working day with one assistant black smith and one beldar all complete as per direction of Engineer-in-charge. |
19 | Providing and fixing precast RCC Gully trap cover of approved quality light duty of size 300 x 300 mm including fixing with cement mortar 1:6 (1 Cement: 6 Coarse Sand) all complete as per the direction of Engineer-in-Charge |
20 | Providing and fixing 75X75 mm P.V.C. P Trap of good and approved quality for Indian type W.C seat, fixing it after dismantling existing SCI/P.V.C. trap and W.C seat and fixing in position by embedding in C.C 1:2:4 ( 1 Cement: 2 Coarse Sand : 4 Graded stone aggregate 10 mm nominal size) all complete as per direction of Engineer-in-Charge. |
21 | Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means viz. tractor trolley of about capacity including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all loads including all lifts involved. |
22 | Providing and fixing door seal of approved quality with screws all complete as per direction of engineer in charge. |
23 | Taking out the large peepal tree at roof and walls including root which was embedded in roof at all heights by demolishing the roof tiles or brick wall if required including disposal the tree material and malba out of municipal limit including repair of roof with cement concrete 1:2:4 (1 cement: 2 coarse sand: 4 graded stone aggregate 20 mm nominal size) all complete as per direction of engineer-in-charge.(The item included all labour,T&P,material in above operation |
24 | Providing and fixing 0.5mm thickaluminium sheet onwooden doorshutter with screw, nails etc all complete as per direction of engineer in charge |
25 | Repair of curtain rod by providing and fixing missing parts such as brackets, side lattoo, pvc sleevs screws etc all complete as per directin of enginee in charge. |
26 | Providing and fixing 20 mm PVC coated M.S curtain rod with brackets sleeves and side fixtures etc. all complete as per direction of engineer in charge.( Length of curtain rod shall be measured for payment) |
27 | Repair of under ground pipe line by earth work in excavation /dismantling of floor whichever is required upto required depth and replacing the unservisiable /damaged pipe by new and finishing the same all complete as per direction of E-I.C .( Note:-New Material like GI/CPVC Pipe , MTA, Elbow , Tee etc shall be paid in relevant items) |
28 | Providing and fixing brass spendle/face to CP brass fitting all copmlete as per direction of Engineer in charge. |
29 | Providing and fixing 20 or 25 mm dia G.I tank nipple of approved qwality all complete as per direction of Engineer in charge. |
30 | Providing and fixing 15mm dia G.I tank nipple of approved qwality all complete as per direction of Engineer in charge. |
31 | Providing and fixing G.I circular tank cover for monkey protection 200 to 1000 liter capacity with G.I screws all complete as per direction of E-IN C. |
32 | Repair of PVC cistern for smooth functioning by replacing internal parts e.g. handle, lever, float valve, rubber washer etc. all complete as per direction of Engineer in charge. |
33 | Providing & fixing various sanitary/ water supply fittings/ items of approved and ISI quality as decided by the Enginner in charge for day to day maintenance works.(a) Washing Jet spray.(i) PTMT (Prayag or equivalent) with 1.0 metre long tube. |
34 | Providing & fixing various sanitary/ water supply fittings/ items of approved and ISI quality as decided by the Enginner in charge for day to day maintenance works. (b) C.I brackets for wash basin/ sink. Including cutting walls and making good the same all complete |
35 | Providing & fixing various sanitary/ water supply fittings/ items of approved and ISI quality as decided by the Enginner in charge for day to day maintenance works. (c) C.P/ P.V.C bend for flushing cistern. Including cutting floors and making good the same all complete (i) P.V.C bend 32 mm dia. |
36 | Providing & fixing various sanitary/ water supply fittings/ items of approved and ISI quality as decided by the Enginner in charge for day to day maintenance works. (i) C.P/ P.V.C bend for flushing cistern. Including cutting floors and making good the same all complete (ii) C.P flush bend 32 mm dia. |
37 | Providing & fixing various sanitary/ water supply fittings/ items of approved and ISI quality as decided by the Enginner in charge for day to day maintenance works. (d) G.I Nipple, 15 mm nominal bore.(i) Up to 75 mm long. |
38 | Providing & fixing various sanitary/ water supply fittings/ items of approved and ISI quality as decided by the Enginner in charge for day to day maintenance works. (e ) G.I Socket.(i) 15 mm nominal bore. |
39 | Providing & fixing various sanitary/ water supply fittings/ items of approved and ISI quality as decided by the Enginner in charge for day to day maintenance works. (i) G.I Socket.(ii) 20 mm nominal bore. |
40 | Providing & fixing various sanitary/ water supply fittings/ items of approved and ISI quality as decided by the Enginner in charge for day to day maintenance works. (f) G.I Elbow.(i) 15 mm nomibal bore. |
41 | Providing & fixing various sanitary/ water supply fittings/ items of approved and ISI quality as decided by the Enginner in charge for day to day maintenance works. (g) P.V.C cover for PVC water storage tanks.(i) For tanks below 500 litre capacity. |
42 | Providing & fixing various sanitary/ water supply fittings/ items of approved and ISI quality as decided by the Enginner in charge for day to day maintenance works. (i) P.V.C cover for PVC water storage tanks.(ii) For tanks 500 litres upto 1000 litre capacity. |
43 | Providing & fixing various sanitary/ water supply fittings/ items of approved and ISI quality as decided by the Enginner in charge for day to day maintenance works. (h) CPVC Union of supreme or equivalent make.(i) for 20 mm outer dia pipes. |
44 | Providing & fixing various sanitary/ water supply fittings/ items of approved and ISI quality as decided by the Enginner in charge for day to day maintenance works. (i) CPVC Union of supreme or equivalent make.(ii) For 25 mm outer dia pipes. |
45 | Providing & fixing various sanitary/ water supply fittings/ items of approved and ISI quality as decided by the Enginner in charge for day to day maintenance works. (ii) CPVC Union of supreme or equivalent make.(iii) For 32 mm outer dia pipes. |
46 | Providing & fixing various sanitary/ water supply fittings/ items of approved and ISI quality as decided by the Enginner in charge for day to day maintenance works. (iii) CPVC Union of supreme or equivalent make.(iv) For 40 mm outer dia pipes. |
47 | Providing & fixing various sanitary/ water supply fittings/ items of approved and ISI quality as decided by the Enginner in charge for day to day maintenance works. (j) CPVC Ball valves.(i) 20 mm nominal bore. |
48 | Providing & fixing various sanitary/ water supply fittings/ items of approved and ISI quality as decided by the Enginner in charge for day to day maintenance works. (i) CPVC Ball valves.(ii) 25 mm nominal bore. |
49 | Providing & fixing various sanitary/ water supply fittings/ items of approved and ISI quality as decided by the Enginner in charge for day to day maintenance works. (ii) CPVC Ball valves.(iii) 32 mm nominal bore. |
50 | Providing & fixing various sanitary/ water supply fittings/ items of approved and ISI quality as decided by the Enginner in charge for day to day maintenance works. (iii) CPVC Ball valves.(iv) 40 mm nominal bore. |
51 | Providing & fixing various sanitary/ water supply fittings/ items of approved and ISI quality as decided by the Enginner in charge for day to day maintenance works. (k) CPVC Female/Male thread Brass Elbow / Socket (MT/FT) of Size 15x20 mm |
52 | Providing & fixing various sanitary/ water supply fittings/ items of approved and ISI quality as decided by the Enginner in charge for day to day maintenance works. (l) Clampfor P.V.C. Pipes. (i) for 110 mm dia pipes. |
53 | Providing & fixing various sanitary/ water supply fittings/ items of approved and ISI quality as decided by the Enginner in charge for day to day maintenance works.(m) Clampfor P.V.C. Pipes. (i) for 75 mm dia pipes. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail