Sales : +91-777 804 8217
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 14-05-2024 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 21-05-2024 |
| Sl. No. | Item Description |
| 1 | Dismantling Asbestos cement corrugated or semi corrugated sheets in roof covering complete all as specified and as directed by Engg-in-Charge. |
| 2 | S&F Steel work as in tubular trusses, purlins, rafter, vertical post and similar works including special shaped washer etc complete using ERW or induction butt welded tubes confirming to IS- 1161 Gde-YST-240 including one shop coat of zinc chromate primer paint incl prepartion of surface at contractor workshop before fabrication complete all as specified and directed. |
| 3 | S & F plain MS plate incl cutting / welding & drilling (Fe 410- w Gde-E 250 Quality A) complete all as specified & directed. |
| 4 | S&F Mild steel screw bolts (machine made) dia of neck 10mm with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, n exc 5cm long complete all as specified. |
| 5 | Supply and fixing in position galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, Chajja etc fixed with self tapping screws as specified high tensile alloy steel trap sheet having 55 MPA yeild strength and zinc (galvanized ) + Aluminum combined, coating of 150 GSM /PM2(AZ-150) of 50mm TCT having top colour coat of regular modified polyester/silicon modified polyester/HDEP polyester of 18 to 20 micron and back coat of 5 to7 micron Epoxy primer fixes. RMR 1040 profile width 1125 mm complete all as specified & directed. |
| 6 | Demolition/dismantling of Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/blankets, any thickness, including cover fillets |
| 7 | S & F plain gypsum board panel 12 mm thick on ceiling with and including necessary GI frame work for seamless ceiling used with \" T \" , channel or any section including screws , cleats ,fasteners, clips and all required accessories , hangers etc of galvanized steel all as per manufacturer design conforming to IS-2095 and 2542(1981) the weight of the board shall be not less than 7 kg per sqmetc ( Any Design & patternas approved by GE)complete all as specified and directed. |
| 8 | S&F Solid PVC Wall lining consisting of 5mm thick wood grain printedPVC sheet inclusive of solvent cement and fixing at site on PVC frame complete all as specified and directed. |
| 9 | S&F 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive offixing on to wall to make PVC Frame acomplete all as specified and directed. |
| 10 | S & F in Repair powder coated aluminium anodised section 40 x 44mm x14 gauge for aluminium partition wall in wall in panel 1m x1m covered with 5mm thick plain/frosted tinted glass on top half portion and 5 mm thick Aluminium Composite panel fixed in half bottom portion complete all as specfied and directed. |
| 11 | S&F aluminium powder coated door frame with partially glazed shutters single/ double leaf divided into two glazed panels including aluminium anodised snap beading and rubber gasket/lining for fixing of glass as directed. The frame shall be fixed with aluminium anodised bolt by drilling in the existing wall and with thrust bolt of suitable size all as directed. The frame and shutter will be made out of the following section and fittinga) Aluminium anodised door frame 101.60 mm x 44.75 mm x 2mmfixed with aluminium thrust bolt in walls by drilling as directed. b) Aluminium anodised sides rail of shutter section 83.5mmx 44.5mm x 2mm c) Aluminium anodised bottom rail of shutter section 150mm x 44.5 mm x2mm.d) Aluminium anodised top and middle rail of shutter section 100mm x 44.5 mm x 2mm.e) Aluminium anodised tower bolt 200 mm long - 02 Nos in each leafAluminium anodised handle 250 mm long of approved Make Classic/Argent 02. No’s in each leaf. h) Glass Pane shall be 5.5 mm thick tinted glass. j) 5 mm thick Aluminium Composite panel and lock including complete all as specified and directed |
| 12 | Supply, fabricating and fixingwindows with frame of aluminium powder coated of extruded aluminium section two track with two sliding shutters with following sections (a) Framesection shall be63.50 mmx38.10 mmx2 mm thick. (b) Two track bottom rail for sliding of shutters 61.85mm x 31.75mmx2mm thick. (c) Two tracktop section shall be 61.85mmx31.75mmx2mm thick(d) for sliding shutter handle& \"H\" bottom section should be 40mmx(18mm+9)mmx1.45mm thick(e) sliding shutter to be provided with 5.5mm thick sheet glass( Modi/Saint gobain/tinted, plain, frosted(f)stainless steel wire clothes 0.36mm nominal dia of wire and average width ofaperature 1.40mmcomplete all as specified and as directed |
| 13 | Supply andfabrication & fixing of Modular wardrobe,cupboards, cabinets, drawers , shelfs, vanity , dressing table including shutters ( depth of 45 Cm up to 70 Cm)etc , all front side, bottom, top, two sides and partions etcmade out of 15-18 mm thickHDHMRboard and back side made out of 8 - 10 mm thick HDHMRboard (Action tesa or equivalent ) with machine pressed 0.5 to 0.8 mm thickfabric/glossy colourlaminateon all exposed front sideand other sidesdecorative laminations. All exposededges ofboardswith machine pressededge band 0.8mm from rehau Germanetc(colour of laminates , design& paterns ofpartations/ etc as approved by GE) including all accessories of fittings -Auto/soft closing hinges for shutters , C/J gola profile for handel less, telescopic channels 18\"\" / 20\"\" long , rollers for smooths sliding of drawers, etc as required complete all as specified and as directed. (Note :Overall net size front sideincluding frame will be measured for payment purpose) |
| 14 | M&L for 18-20 mmthick of approved shade granite stoneZ Black (superior Quality) slab (table rubbed and polished as in floors, jambs, steps, cooking platform etc and the like, over & including 15 mm thick screed in CM 1:6, pointed in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including two strip of line make on (tread of stair case) granite complete all as specified and directed |
| 15 | M&L for Granite stone (of any type) 18-20mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stonegrinding and polishing completeincluding Screed bed or bedding layer of mortar 15 mm thick in CM 1:4 for laying floor/wall finishes etc and the like including round cutting etc complete all as specified and directed. |
| 16 | S&F in Repair Stainless steel 20 mm dia curtain rod of medium weight including fixingSS brackets, curtain ring @ 7 nos/Rm and decorative end/Latto supportsetc complete all as directed. |
| 17 | Demolition of brick work built in cement mortar of any description and including PCC Coping etc anddisposal of all debris out side Mod land completeall as specified and directed. |
| 18 | M&L for brick work with sub class ‘B’ bricks straight or curved on plan exceeding 6 M mean radius, using old size bricks built in CM 1:6 all as specified and directed. |
| 19 | M&L for plastering 15 mm thick in CM 1:4 on fair faces ofbrick or concrete surfaces, finished the surface even and fair with using WPC @ 2% by weight of cement(If Required) (Note- WPC shall be measured and paid separately) |
| 20 | M&L for 15mm thick cement plaster on other than fair faces of brick work or concrete surfaces in CM 1:6 finished even andfair complete all as specified and directed |
| 21 | M&L for 25 mm thick PCC 1:2:4 type B-0 using 12.5mm graded stone aggregates as in sub base of floors, finished the surface even and rough complete all as specified and directed. |
| 22 | M&L for Non skidceramic tiles7mm to 8mm thick Ist quality ceramiccoloured ofarea exc 0.11 Sqm but nexc 0.18 Sqm (400x400mm) in flooring set and jointed in neat cement slurry and pointed in coloured cement to match with tiles all as specified and directed |
| 23 | M&L for glazed ceramic coloured tiles of size 300x600x8mm thick on vertical surfaces such as skirting, dados and risers to steps etc set and jointed in neat cement slurry and pointed with white cement and coloured pigment to match the tile over 10mm thick cement plaster in CM 1:4 and finished the surface of plaster rough complete all as specified and directed |
| 24 | M&L for Virified Ceramic tiles double charged /ultra charged 10 mm thick (square/ rectangular) polished, area of each tiles exc 0.42 Sqm but not exceeding 1.00 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15 mm thick Screed bed or bedding layer in cement mortar 1:6for laying floor finishes complete all as specified and directed |
| 25 | M & L for preparation of new plaster surfaces and applying two coat distemper oil emulsion over 3 mm thick wall care putty on walls as levelling course complete all as specified and directed. |
| 26 | Taking down steel tubing including conction 15 mm bore fixed in any position. |
| 27 | Taking down steel tubing including conction 20 mm bore fixed in any position. |
| 28 | S&F 20 mm bore GI Tubes,medium grade\" galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors,complete |
| 29 | Supplying and laying of 20 mm (Outer Diameter) CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ ceiling or laying in floors complete all as specified |
| 30 | S&F 20 mm bore Brass Elbow for fixing of cpvc pipe |
| 31 | S&F Brass Elbow (3/4 X ½) mm for fixing of cpvc pipe |
| 32 | S&F 20 mm Brass Tee for fixing of cpvc pipe |
| 33 | S&F 20 mm Male Brass Threaded Adaptor (MTA/ MBTA) ) for fixing of cpvc pipe |
| 34 | S&F in Repair Wash down water closet (Pedestal pattern) using vitreous China squatting pan of pattern “long pan”, size 580 mm white with ‘P’ or ‘S” trap, front or back inlet and foot rests, any pattern including PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets, Flush pipe of polyethylene of low or high density or PVC 32 mm dia, for low level cistern, Plastic water closet seat, white, recessed bottom patternand cover and mild steel chromium plated or aluminised hinging device complete. |
| 35 | S & F in repairs Vitreous china floor mounted WC( Cascade) one piece type (off white) including connecetion in drain etc incl water closet seat cover, flushing cistern, with P or S trapwith all fitting and fixturecomplete all as specified and as directed. |
| 36 | S&F as in repair oval type wash hand basin chinaware of 560 x410 mm size, fixed on counter type platform complete all as specified and as directed. |
| 37 | S&F in Repair 15 mm bore Brass CP wash hand besin mixer for mixing hot & cold water screwed down complete all as specified and directed. |
| 38 | S & F in repairs ready made wall / floor mounted Vanity box made of HDHMR board, both side laminated and front side melamine surface, consisting of the following combination :-(a) Wash Hand Basin 620 mm x 460 mm including brass waste cupling & Waste pipe(b) Base Cabinet 585 mm x 445 mm x 480 mm. |
| 39 | S&F in Repair PVC low level 10 lit capacity valve less syphonic action type flushing cistern with inlet ball valve and handle including brackets complete all as specified and directed |
| 40 | S&F in Repair PVC connections of 15mm size with PTMT nuts of 600mm long complete all as specified and directed. |
| 41 | S&F in Repair bib taps chromium plated 15mm alloy with crutch or butter fly handle screwed down screwed for iron pipe 15mm bore complete all as specified and directed |
| 42 | S&F in Repair 15 mm bore angle stop valves cast copper alloy chromium plated screwed down high pressure with crutch or butterfly handle screwed withr iron pipe of union. |
| 43 | S&F in Repair for CP soap dish compete all as specified and directed. |
| 44 | S&F in Repairfor CP 600 mm long towel rail compete all as specified and directed. |
| 45 | S&Fin Repair for CP health faucet with 1 mtr flexible tube and hook compete all as specified and directed . |
| 46 | S&F in Repair for CP paper holder fixing to wall with ss screw compete all as specified and directed. |
| 47 | M&L 75mm dia of outlet, PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified and directed. |
| 48 | S & F in repair 75 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wall/Floor, complete all as specified and directed. |
| 49 | S & F for 75 mm bore PVC (SWR) bends any radius with oval access doors complete all as specified and directed. |
| 50 | S&F 75 mm dia PVC (SWR) junction (single ‘T’) equal or un-equal complete all as specified and directed |
| 51 | S & F in repair 110 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints, laid in trenches or in floorscomplete all as specified and directed. |
| 52 | S & F for 110 mm bore PVC (SWR) bends any radius complete all as specified and directed. |
| 53 | S & F PVC (SWR) vent cowl suitable for 110 mm bore of pipe complete all as specified and directed. |
| 54 | S&F 110 mm dia PVC (SWR) junction (single ‘T’) equal or un-equal complete all as specified and directed |
| 55 | S&F grating dome 100 mm dia of PTMT (minimum weight 25 gms) complete all as specified nad directed. |
| 56 | S & F in repair 150 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints, laid in trenches or in floorscomplete all as specified and directed. |
| 57 | S & F for 150 mm bore PVC (SWR) bends any radius complete all as specified and directed. |
| 58 | Taking down of chowkhat or frame (without taking off shutter from frame) area not exc 1.50 Sqm eachincluding builder hardware fitting complete all as specified and as directed. |
| 59 | All as above but area exc 1.50 Sqm & not exc 4.00 Sqm each complete all as specified and as directed. |
| 60 | S&F solid PVC moulded door frame of size 50x47mm, made out of 5mm thick one side prelaminated and other side plain colour PVC sheet & edges will be painted to match with prelaminated sheet, reinforced with MS square tube fixed with screw/plugs to brick walls complete all as specified and as directed. |
| 61 | S&F Factory madeSolid PVC Moulded Door Shutter 28 to 30mm thick (stiles),with 2, 4or 6 raised panel design with 2mm thick Moulded Prelam PVC Sheet on the front face & 2mm prelam PVC Sheet on back face, supplying & fixing in frame at site as per specification & drawing, supplying & fixing in the frame at site as per specification & drawing complete all as specified and as directed. |
| 62 | S&F 100mm size, stainless steel butt hinges, fixed with Stainless steel screws complete all as specified and as directed. |
| 63 | S&F 200 mm long aluminium anodised barrel tower bolts of extruded section complete all as specified and as directed. |
| 64 | S&F 150mm size extruded aluminium alloy handles, cast type anodised complete all as specified and as directed. |
| 65 | S&F in Repair of 4 mm thickAluminium Composite panel cladding of approvedquality and colour as approved by GE,fixing in MS frame at any height and including MS frame of size not exc 0.36 sqm (used in rect angular tubes of size 50.8mmx 25.4mm x 2.9mm thick or square tubes 38mm x38mm x 2.9 mm thick are used in frame) and filling the joints with all weather siliconsealant including all mouldings, cuttings, etc complete all as specified and directed. |
| 66 | M&L complete removal of existing water proofing treatment of roof, cleaning with wire brushes etc including removal of Plant, Roots, Vegetation etc and removal to outside MD landcomplete all as specified and as directed. |
| 67 | M&L for roof treatment with polymeric membrance (APP based) with non woven polyster mat as reinforcement with following:- (a) M&L for cleaning the new plastered surface and providing & laying a coat of cold applied bitumen 85/25 based primer on entire surface @ 0.30 Ltr/Sqm on dry and clean surface. (b) M&L for providing & laying APP based polymeric membrane of 3 mm thickness of weight not less than 3.0 Kg/Sqm with non woven polyster fibre as reinforcement on primed surface by torch application with 15 cm end over laps & 10 cm side over laps etc as per manufacturers instruction. M&L for finishing of top surface by applying two coats of aluminium paint complete all as specified and directed. |
| 68 | Cutting grooves 75 mm wide & 65 mm deep in brick wall/ RCC surfaces at any location shaping horizntal face with mechanical cutter and grooves filled with PCC 1:2:4 type B-0 (using 12.5 mm gradded stone aggregate) mixed with chemical compound approved by E-in C\"s Br. till last date of bid submission mixed with proportion 200 ml per 50 kgs cement as per manufactures instruction all as specified & directed. |
| 69 | M & L for washed stone grit plaster on exterior walls in two layers, under layers 12 mm thick cement plaster 1:4 (1 cement :4 coarse sand) following the under layer with scratching tool, applying cement slurry on the under layer @ 3 Kg of cement per square metre, top layer with 15 mm thick cement plaster 1:1/2:2 (1 cement: 1/2 coarse sand:2 coloured marble stone chipping 10mm nominal size) including using Colour pigment & marble powder as required in ground in panels with groove all around as per approved pattern includingscrubbing and washing the top layer with wire brushes and water to expose the stone chippings includind forming groove of uniform size 15mm wide and 15mm deep as per approved pattern complete all as specified and as directed. |
| 70 | Excavation in trenches not exceeding 1.5 M wide and not exceeding 1.5 M in depth for foundation etc or for shafts, wells, cess pits, manholes, pier holes etc not exceeding 10 Sqm on plan and not exceeding 1.5 M in depth and getting out in soft/loose soil. |
| 71 | Removing of excavated materials to a distance not exceeding 50 M and deposing where directed at a level not exceeding 1.5 M above the starting point |
| 72 | Returning filling in, including spreading, leveling, watering and well ramming in layers not exceeding 25 cm in soft/loose soil |
| 73 | M&L RCC 1:2:4 Type B1, Using 20 mm stone aggregate as Foundations, including rafts,footings, foundation beams; plinth beams; bases for columns, etc and similer items, balconies, canopies, deck slabs and in shelves etc complete. |
| 74 | M&L for mild steel 10 mm dia tmt bar and over as in reinforcement cut to length, bent in shape required including cranking, bending, spirally hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips etc. |
| 75 | Description all as per item No 74 above but mild steel tmt bar 6mm to 8 mm dia. |
| 76 | Use and waste of formwork to sides ofconcrete foundations, plinth beams, footings, base of columns, pile caps, Lintel and similar work, vertical or to batter, complete all as specified and as directed for rough finished surfaces |
| 77 | S&F1000 litres capacity rotational moulded polyethylene water storage tanks triple layer (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part-I including one 20mmball brass valve with polythene float and fly nut including dismantling old brocken tank complete all as specified and directed. |
| 78 | S&F stop/Gate valves, cast copper alloy, screwed down, high pressure with crutch or butter fly handles, screwed both ends for iron pipe 20 mm dia, fixedcomplete all as specified and directed |
| 79 | Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and as directed. |
| 80 | M & L providing PCC 1:4:8 type D-2 using 40mm graded aggregate as in foundation,filling and mass concrete. |
| 81 | Form work to sides of pillars,posts,strutscolumns etc. |
| 82 | M & L for RCC M-25 (Design mix)using 20mm graded aggregate as in foundation including rafts,footing,foundation beam,plinth beams,bases for columns etc. |
| 83 | M & L for RCC M-25 (Design mix) using 20mm graded aggregate as in columns,pillars,post and struts. |
| 84 | Mild steel bars 5mm dia and over up to including 10mm in stirrups spacers and binders., cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips |
| 85 | S&F Framed work as in doors or gates of angle or other section with gasset plates,rails,braces etc complete drilled for fixing of steel sheeting or other covering Door etc to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings ( exclusive of steel, sheeting or other covering, running rails and guides) and hanging, also fastening and fixing, Fe 290 (Gde E-165) complete. |
| 86 | M & L for applying two coats of synthetic enamel paint over one coat of red oxide primer over new steel surface including preparation etc complete. |
| 87 | Removal of surface surplus soil to a distance of 250m and not exceeding 500m and depositing where directed at the level n.exc. 1.5m above the starting point. |
| 88 | M & L for PCC 1:3:6 type C-2 using 40mm graded stone aggregate as in foundation, filling and mass conc. etc complete all as specified and directed. |
| 89 | M & L for brick work with sub class B brick straight or curved on plan exc 6m mean radius built in cement mortar 1:4 complete all as specified and directed. |
| 90 | M & L for PCC 1:2:4 type B-1 using 20mm graded stone aggregate as in coping / bed blocks incl. weathering rounded or chamfered angles and throating incl. necessary form work req. as in specified and directed |
| 91 | Extra for forming fair finished drain or channel up to 30 cm of girth in cement concrete using extra cement including forms moulds etc. |
| 92 | M & L rendering15mm thick in cement mortar 1:4 on fair surfaces of brick work or concrete surfaces finished even and smooth without using extra cement complete all as specified and directed. |
| 93 | S&F steel fiber reinforcement concrete (SFRC) drain cover with perforated holes factory made of size 0.50m x 1m x 0.075mm thick complete all as specified & directed. |
| 94 | M&L for RCC (nominal mix) Type B1 1:2:4 (20 mm graded aggregate) for Columns, pillars, piers, posts and strutscomplete. |
| 95 | M&L for Use and waste of form work to sides and soffits of floor or roof beams, beam haunching, girders, bressumers, lintel beams/lintel band , cantilever and similar work rough finished surface of concrete complete all as specified and directed. |
| 96 | M&L for RCC (nominal mix) Type B1 1:2:4 (20 mm graded aggregate) for Beams, cantilevers, bressummers, lintels over 1.5m span complete. |
| 97 | M&L for 15 mm thick rendering in CM 1:6 on stone masonry surfaces or surfaces other than fair faces of brick work, finished fair and even by applying 3 mm thick wall care putty complete all as specified and directed. |
| 98 | M&L for 15 mm thick rendering consisting of two layers, first layer 10 mm thick in CM 1:4 and top layer 10 mm thick in CM 1:4 mixed with WPC on fair faces of brick work or concrete surfaces finished fair and even complete all as specified and directed. |
| 99 | M&L for prepration of new plastered surfaces of wall and applying of Birla/JK white wall putty approx 2 mm thickas per manufacturer\"s instruction on existingprepared surface and make the surface smooth by rubbing with sand papers etc and applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new/ Old surfaces.complete all as specified and directed. |
| 100 | M&L for preparing new plasteres surfaces and applying of Birla/JK white wall care putty approx 2 mm thickas per manufacturer\"s instruction on existingprepared surface and make the surface smooth by rubbing with sand papers etc and applying two coats of Plastic emulsion paint overa coat of primer of walls Surfaces of any description over 10cm girth or width, not otherwise described complete all as specified and directed. |
| 101 | M&L for 75 mm thick cement concrete 1:3:6 type C-2 (using 40 mm graded stone aggregate) as in floor sub base complete all as specified and directed. |
| 102 | M&L Machine cut kota stone slab flooring 18 to 20mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing including 15mm screed bed in CM 1:6 completeall as specified and directed. |
| 103 | M&L Machine cut kota stone slab 18 to 20 mm thick as inriser of steps, skirting, dado and pillar laid over and including12mm thick backing coat in CM 1:4 and jointed with grey cement slurry mixed with pigment to match the shade of the slab incl rubbing and polishing including Complete all specified and directed. |
| 104 | S&F for steel windows / Ventilators fabricated from roll formed sections made of galvanized steel colourcoated powder coated (Base steel as per IS-513 D quality galvanized asIS 277 with zinc coating of 120 GSM with total coated thickness of 0.60mm. The coated section shall be with primer coated of primer of -7 microns thick, finish painted with a polyster paint of 12.16 microns thick and back coated with alkyd backer of 5-7 microns or powder coated with pure plyster powderupto 50-60microns thick with the following specifications (a)Main frame 72mm x 55mmx0.58mm (b) Mullion 72mmx50mm x0.58mm(c)Glazed /guazed shutter frame 47mmx20.20mmx0.58mm (d) Glass beads size 12mmx12mmx0.58mm Accessories. Each shutter shall be provided the following fittins (a) Stainless steel pipe of hinges01 set (b) Alumminium powder coated handle-04 Nos . Glass panes Glazed shutter and fixed glass provided with glass of 5.00mm thick float glass . WIRE MESH –Stainless steel wire mesh of 0.3 mm nominal dia of wire and average width of aperature 1.40mm. Grills window shall be provided with grill made of 10mm square MS bars welded to 12mmx6mm thick MSplate .Distance between bars should not be more than 12cm c/c. Total grill unit shall be enamel painted and fixed to window frame with screw .Note: The glazed/Guaged shutter includingguard bars shall be measure once i.e.as per area of opening. No separate payment of separate shutteri.e. glazed and fly proof and guard bars shall be made. Area of shutter shall bethe area of opening.The rate quoted by the contractor is deemed to inclusive of all aspects as specified in Drg No CEDZ/TD/289 sheet 1 R/2 and 2R/2. |
| 105 | M&L for 75 mm thick inPlain cement concrete type C2 ( 1:3:6)( using 40 mm graded aggregate ) as in plinth protection laid in alternate bays (not exceeding 2 Sqm each) finished even and smooth at top without using extra cement and providing joints throughout the thickness of plinth protection, filled with mastic filling comprising one part of bitumen 85/25 grade and three parts of sand by weight all as directed at site. |
| 106 | Provn of E-board 4mmthick self design type tiles ceiling on GI Powder coated channel/Tee/Grid of frame work with the following specification including cutting holes to brick wall built in cement mortar & making good in cm1:3 of cement concrete 1:2:4 type BO as required :-(a) Plugging to wall around the rooms & supplying & fixing GI Powder coatedangle of size 25x25x1.0 mm (b)S&F of 1.60 mm dia GI wire suspenderswith adjustable clamps including fixing to ceiling dash free fasterers(c) S&F 25 x25 x1.5mm GI Powder coatedtee as in main & cross members at 595mm c/c supported suspenders alongwith adjustable clamp to maintain level . ( d)S&F E-board 4mmthick self design type ceiling tiles of size 610mm x610mm confirming to relevant IS in squares of GI Powder coatedTee with clips made to shape. Shade and pattern of E- board shall be as approved by GE |
| 107 | S&F 35mm thick flush shutter, solid core construction, with block board core and plywood face panel commercial type on both sides. |
| 108 | Material and labour for second class hardwood glazed and skeleton door shutters 35mm thick, open rebated and prepared to receive glass gauge etc ,devidedin to squares, with plain chamfered or rounded mitred and rebated sash bars any numbers. edges of framing plain, chamfered or rounded fitted with cut and mitred beads for securing glass, etc complete all as specified and directed. |
| 109 | M&L for butt hinges Medium weight cold rolled mild steel 100mm long complete |
| 110 | M&L Aluminium alloy anodised sliding door bolt with hasp, stape (bolt type) and fixing clips of sheet cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy of 250mm long |
| 111 | S&F Extruded Aluminium alloy handle fabricated type, anodised of size 150mm. complete all as specified & directed. |
| 112 | M&L for 150mm length of Aluminium anodised barrel tower boltes of extruded section complete. |
| 113 | S&F mild steel300mm,ordinary rat tail rod pattern springs including roller and roller plate complete. |
| 114 | M&L forS/S wire cloth 0.56mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned tacks, galvanisedwire staples all as specified and as directed complete.. |
| 115 | M&L for Preparing new surfaces of wood and wood based materials of any description over 10 cm in width or girth and applying two coats of synthetic enamel paintover a coat of pink primer complete. |
| 116 | Taking down carefully copper/ aluminium point wiring (light, fan, socket or power) complete (fitting such as switches, ceiling roses, pendent, regulator socket etc shall be measured and paid separately) and making good disturbed surfaces of wall floor etc complete all as specified and as directed. |
| 117 | Taking down old and unserviceable sub main wiring and removing from the site and making good the disturbed surface complete all as specified and directed. |
| 118 | M&L point wiring for modular switches with 1.5 sqmm , single core , multi stranded copper conductor PVC insulated and unsheathed (FRLS) cable 1100 Volts grade, drawn throughconcealed Conduit 25 mm as requirement of siteincluding cadmium plated screws as per ISI,size pvc insulated unsheathed copper earth continuity conductor to common earth and connecting to earth dolly for One light/ fanpoint controlled by one switch 5 Amps one way single polecomplete all as specified and directed.Make- Polycab/Havells/Finolex. |
| 119 | All as above but additional light on same point controlled by same switch (3 runs of 1.5 sqmm wire shall be measured as one run ) |
| 120 | All as per item No 118 here in before but for one three pin, 5 Amp, socket out let on independent board completeall as specified and as directed. |
| 121 | All as per item No 118 here in before but for one three pin, 5 Amp, socket out let on same board completeall as specified and as directed. |
| 122 | All as per item No 118 here in before but point wiring with 2.5 Sqmm,multistranded, copper conductor cable, for 15 Amps socket outlet on independent board with 2.5 Sqmm size earth conductor completeall as specified and as directed. |
| 123 | All as per item No 118 here in before but point wiring with 2.5 Sqmm,multistranded, copper conductor cable, for 15 Amps socket outlet on Same board with 2.5 Sqmm size earth conductor completeall as specified and as directed. |
| 124 | All as per item No 118 here in before but point wiring with 4 Sqmm,multistranded, copper conductor cable, for AC point on independent board with 4 Sqmm size earth conductor completeall as specified and as directed. |
| 125 | S&F in replacement modular cover plate with frame, 3 modules completeall as specified and as directed. Make - Anchor Roma/ Indioasian/ legrand. |
| 126 | S&F in replacement modular cover plate with frame, 4 modules completeall as specified and as directed.Make - Anchor Roma/ Indioasian/ legrand. |
| 127 | S&F in replacement modular cover plate with frame, 6 modules completeall as specified and as directed. Make - Anchor Roma/ Indioasian/ legrand. |
| 128 | S&F in replacement modular cover plate with frame, 12 modules completeall as specified and as directed.Make - Anchor Roma/ Indioasian/ legrand. |
| 129 | S&F in replacement modular metal flush box, 3 modules completeall as specified and as directed. |
| 130 | S&F in replacement modular metal flush box, 4 modules completeall as specified and as directed. |
| 131 | S&F in replacement modular metal flush box, 6 modules completeall as specified and as directed. |
| 132 | S&F in replacement module metal flush box, 12 modules completeall as specified and as directed. |
| 133 | S&F in replacement modular switch, 1 way, 6 Amp, 1 Module, completeall as specified and as directed. Make - Anchor Roma/ Indioasian/ legrand. |
| 134 | S&F in replacement modular Socket, 6Amp, 2/3 Pin, combined, 2 modulecompleteall as specified and as directed.Make - Anchor Roma/ Indioasian/ legrand. |
| 135 | S&F in replacement modular switch, 1 way, 16 Amp, 1 Module, completeall as specified and as directed.Make - Anchor Roma/ Indioasian/ legrand. |
| 136 | S&F in replacement modular Socket, 16/6 Amp, 3/5 Pin, combined, 2 modulecompleteall as specified and as directed.Make - Anchor Roma/ Indioasian/ legrand. |
| 137 | S&F in replacement modular Fan step regulator, 120W - 1 module completeall as specified and as directed.Make - Anchor Roma/ Indioasian/ legrand. |
| 138 | S&F in replacement Ceiling rose, PVC/ polycarbonate, isolated body type, three terminal, 240 volt,fixed in position & connecting completeall as specified and as directed. |
| 139 | S&F in replacement sub main wiring with 2 runs of4 Sqmm, single core, PVC insulated & unsheathed cable, 1100 Volts grade, with multi stranded, copper conductor, drawn through and including 20 mm dia, concealed,PVC rigid, non metallic conduit, medium grade, as per IS, with all fittings and one run of 4 Sqmm size PVC insulated copper conductor complete all as specified and as directed.Note:- Two run of cable along with earth conductor including PVC rigid conduitshall be measured as one RM length). |
| 140 | M&L in replacementfor sub main wiring with 2 runs of10 sqmm single core, PVC insulated & unsheathed cable 1100 Volts grade with multi stranded, copper conductor drawn through concealed conduit including PVC rigid conduit 32mm medium grade as per ISS and one run of 10 sqmm sizeearth wire PVC insulated copper conductor complete all as specified and directed.(Note Two runs of 10 sqmm copper FRLS cable & one run of 10 sqmm copper cable in and including 32 mm PVC conduit medium grade will be measured as one unit. Make : Finloex/Havells/Polycab |
| 141 | S&F in replacement load line, distribution board, double door type, TPN, vertical, 8 way,suitable for accomodating upto 125 Amps MCCB with incomming frame three pole, including 250 Amp copper bus bar, neutral link, blanking plates etc complete all as specified and as directed.Make : Legrand Model: 5077 47 or equivalent model of Make mentioned in PS. |
| 142 | S & F inreplacementfor load line distribution board double door type, TPN, vertical, 4 way,complete suitable for accomodating upto 125 Amps MCCB with incomming frame three pole , including bus bar, neutral link, blanking plates etc complete all as specified and directed.Make : Legrand Model: 507740/Havells/ ABB |
| 143 | S & F inreplacementfor distribution board double door type, SPN, 12 way,completeincluding 200 Amps rated bus bar, neutral link, blanking plates etc complete all as specified and directed.Make-Legrend/ Havells/ ABB |
| 144 | S & F inreplacement or distribution board double door type, SPN, 8 way,completeincluding 200 Amps rated bus bar, neutral link, blanking plates etc complete all as specified and directed.Make-Legrend/ Havells/ ABB |
| 145 | S&F in replacementBldgsecurity light fitting LED 25 Watt, highly efficient IP66 LED,high power having aluminium pressure die cast housing and PC cover in the front and high power lens for batwing light distribution withelectric connection with suitable size of PVC insulated copper wireincluding GI bracket 1.5 Mtr with clamps and bolts complete all as specified and directed.Make : ORIENT Model No :- LSFS-25-CF-PC / Philps/ wipro |
| 146 | Supply, fixing and connecting in replacement recessed mounting back- lit LED 2X2, 36 watttile in CRCA housing with full opal diffuser suitable for Armstrong/ Grid Ceilings Type, size 595X595mm (Nominal),High lumen efficacy LED with viewing angle of 120 degree used to enhance the luman output Height suitable forWhite Housing & Isolated Electronic Driver, with Output Short-circuit protection, Surge Voltage protection minimum 2.5KV, safety & performance test as per IS:15885 Total system Lumen not less than 3600, in Cool day Light (6500K), Power factor>0.95, CRI (Ra) >80 with Average life of 50000 Burning hours complete with all accessories as required complete all as specified and as directed.Make : ORIENT Model No :- LTRAQ-36-C-VO/ Havells/ wipro |
| 147 | Supply, fixing and connecting in replacement of Slim LED Batten 10 watt with Surface/Wall Mounted integrated LED 2 feet Fitting Polycarbonate housing and diffuser with viewing angle of 120 degree used to enhance the luman output Height suitable forWhite Housing & Isolated Electronic Driver, with Output Short-circuit protection, Surge Voltage protection up to2.5KV . Total system Lumen of 10W Led should be 1000 or above in Cool day Light(6500K), Power factor>0.9, CRI (Ra) >80, System with Average life of 50000 Burning hours complete with all accessories as required complete all as specified and as directed.Make : ORIENT / Philps/ wipro |
| 148 | Supply, fixing and connecting in replacement of Slim LED Batten 20 watt with Surface/Wall Mounted integrated LED 4 feet FittingPolycarbonate housing and diffuser with viewing angle of 120 degree used to enhance the luman output Height suitable forWhite Housing & Isolated Electronic Driver, with Output Short-circuit protection, Surge Voltage protection up to2.5KV . Total system Lumen of 20W Led should be2000 or above in Cool day Light(6500K), Power factor>0.9, CRI (Ra) >80, System with Average life of 50000 Burning hours complete with all accessories as required complete all as specified and as directed.Make : ORIENT Model No :- LBLN-20-C- SQ/ Philps/ wipro |
| 149 | M&L Earthing complete with galvanised Iron earth plate eletrode 600x600x6mm thick, burried directly in ground (earth pit not less than 2.25mtrdeep below GL) with top edge of the plate not less than 1.5 metre below normal grond level, surrounded with adequate quantity of charcoal dust mixed with salt to a packed thickness of 15cm all round the plate with using 4mm dia GI wire as earth wire electrode welded and revetted to earth plate at one end connected to main DBs of Building at another end GI earth wire encased in and including 15mmbore GI light grade pipe through upper end of earth plate upto main DB of bldg, with 20mm bore GI pipe light grade as water pipe from earth chamber to upperedge of earth plate, MS funnel with wire mesh fixed on water pipe including execvation earth work, Provn ofPCC pit in PCC 1:2:4 type B-1 chamber and RCC pit cover 50mm thick precast RCC 1:2:4 type BI duly reinforeced with MS bars 8mm dia @ 150 mm centre to centre, both ways complete with lifting handle all as shown in electrical plate No 3 of SSR of part-I complete all as specified and as directed. |
| 150 | S&F in replacement modular blanking plate, 1 Module complete all as specified and as directed. |
| 151 | Supply and fix in repair for PVC T-COVER complete all as specified and as directed. |
| 152 | Cutting chases, pinning in, including making good in cement mortar 1:3 including painting to match with the existing surface as in edges of landings, steps, cills, sunshades, shelves, lintels, etc; and for concealed conduit wiring, etc, cutting not exc 10 cm girth complete all as specified and as directed. |
| 153 | S& F PVC Ventilation250 mm sweep 240 Volt, 1325RPM , Air delivery 500 CMM connection with self closing louver frame flexible PVC copper wire from ceiling rose to exhaust fan including provn of opening of hole on brick wall and grouting nut and bolt of suitable size complete all as specified and directed. Make:-Havells/Bajaj / CG |
| 154 | S& F Exhaust fan 300 mm sweep 240 Volt Heavy duty (Iron),1375 RPM , 600 CMM Air delivery , 42 watt with suppoting frame connection with flexible PVC copper wire from ceiling rose to exhaust fan including provn of opening of hole on brick wall and grouting nut and bolt of suitable size complete with minimum two year warranty on Productall as specified and directed.MAKE- BAHAR 300 MM METALLIC GREY EXHAUST FAN BAJAJ/ Havells/ CGNote :- Old unserveciable exhaust fan will be deposited to MES store yard. |
| 155 | S& F Wall fan400 mm sweep 240 Volt Heavy duty (Iron),1350 RPM , 75 CMM, Power 60 wattwith with all connected accessories five star rated complete all as specified and as directed.nd bolt of suitable size complete with minimum two year warranty on Productall as specified and directed.MAKE- BAJAJ/ Havells/ CG |
| 156 | Supply & fixing of ceiling fan(White colour) 230 V, 1200 mm sweep,speed 340 RPM , having rod length 300 mm complete all as specified and directed by Enggr in charge.Make- Havells/Bajaj/Orient. Note :- Old unserveciable exhaust fan will be deposited to MES store yard. |
| 157 | Supply and FixingGeysers of cap. 25 Ltr, five star BEE rating , Electric Driven, Single phase, 240 V, Storage vertical type and heating element 2 KW, inner shell Glass lined enamel coated incoloy heating elements , temperature indicating dial , tank design is suitable to withstand 8 bar pressure, shock resistant ABS outer bodyautomatic cutoff , including electrical and water connection with hot and cold water connection pipe (PVC type) and fixed on the wall with mild steel fastner 150 mm long and 10 mm dia with pin and bolts completewith minimumtwo year warranty on Product all as specified and directed. Make: BAJAJ (CALENTA )/ HAVELLS/ /USHA.Note :- Old unserveciable Geyser will be deposited to MES store yard. |
| 158 | Supply and Fixingof five star rated Geysers of cap. 10 Ltr, Electric Driven, Single phase, 240 V, Storage vertical type and heating element 2 KW, inner shell made up of copper, automatic cutoff , including electrical and water connection with hot and cold water connection pipe (PVC type) and fixed on the wall with mild steel fastner 150 mm long and 10 mm dia with pin and bolts complete all as specified and directed. Make: HAVELLS/V GAURD /USHA. Note :- Old unserveciable exhaust fan will be deposited to MES store yard. |
| 159 | S&F sheet metal enclosure with socket plug top, single pole and neutral enclosure with a two pin earth plug and socket complete with one MCB of capacity 20 Amps , 240 Volts complete all as specified and directed. Make:-Legrand/Havells/ indoasian. |
| 160 | S & Fin replacement MCCB 415 V, 125 Amps, 25 KA, 4 Pole complete all as specified and directed.Make -Legrend / ABB / Havells |
| 161 | S & F in replacement MCB DP, 240 Volts, 40 Amps complete all as specified and directed. Make-Legrend / ABB / Havells |
| 162 | S & Fin replacement MCB DP, 240 Volts, 63 Amps complete all as specified and directed. Make-Legrend / Havells / Seimens |
| 163 | S & Fi in replacement MCB SP, 240 Volts, 10 Amps complete all as specified and directed.Make-Legrend / ABB / Havells |
| 164 | S & Fin replacement MCB SP, 240 Volts, 16 Amps complete all as specified and directed.Make-Legrend / ABB / Havells |
| 165 | S & Fin replacement MCB SP, 240 Volts, 32Amps complete all as specified and directed.Make-Legrend / Havells / Seimens |
| 166 | S & F in replacement MCB SP, 240 Volts, 63 Amps complete all as specified and directed.Make-Legrend / ABB / Havells |
| 167 | Dismantaling and Shifftingthe steel tubeler pool near by 8 to 10 mtr through mainpower/ JCB with Under ground cables of suitable sizes in ground, joints , insulation proper and digging the pole other side properly with all connected items complete all as specified and as directed. |
| 168 | S& F in replacement Ultra Slim surface mounting round Led down light 12 watt designed with excellent thermally managed aluminum pressure die cast housing with heat dissipating fins for large surfacearea complete all as specified and as directed. Make - ORIENT Model No :-LDSER-12C-V1 / Philps/ wipro- |
| 169 | Supplying, installation, testing & Commissioning of LED Post top 30 watt ,I P65 elegantly designed spun aluminium and high grade aluminium , heat sink for efficient thermal managment , pole mounted posttop 30W withMS base provided to support the housing Power coated black treatment.Make model no :-ORIENT Model No :- LLAS 30 C / Havells/ wipro |
| 170 | S& Fin replacement Bedside/ Comet wall Lightwith 20watt led bulb holder typecolour ( white) , premium finish complete all as specified and as directed. Make - Philips. |
| 171 | Supply , assembly and erection of GI Ducting with C & SS rectangular/square duct made out of \"L\" shaped hollow profile, duly boxed, including all accessories such as Corner, Cleat, Carriage bolt, Gasket and appropriate sealant on longitudinal joints etc complete including necessary MS Channels, gurder supports as approved by Engg -in-charge including making of hole in any type of wall and making good with plastering work, mesonary work and necessary MS channel supports complete all as specified and directed. |
| 172 | (a) 24 Gauge |
| 173 | (b) 22 Gauge |
| 174 | Supply & erection in replacement 25 mm thick nitrile duct thermal insulation with Aluminium foil, non - fibrous, fire retardant, closed cell, tri-dimensional, chemically cross linked polyethylene foam , confirm to class O\" for fire propation and class 1 for surface spread of flame & factory laminated aluminium foil complete all as specified and as directed. |
| 175 | S&F in replacement acousting lining of supply air ductung complete with GI frame , tissue paper, 26 Gauge perforatedAluminium Sheet thick , ofdensity 32 Kg/cum fiber glass insulation complete complete all as specified and as directed. |
| 176 | Supply, installation, testing and commission of UL-555 motorized fire dampers complete with smoke detector/ thermister linkage etc in AHU Room Supply Air Ducts as required for operation complete all as specified and directed. |
| 177 | Supply, installation, testing and commission of Actuator with control panel in AHU Room Supply Air Ducts as required for operation complete all as specified and directed. |
| 178 | M & L in replacement under deck insulation for metal roof with bonded fibre glass wool of density 24 Kg/Cum, 50 mm thick, suitably factory laminated with aluminium foil backed up by scrim and Kraft paper (FSK), facing with 50 mm projection for overlap and buttingin following operations complete all as directed and specified:-(a) S&F in replacement 6 mm dia M S rods between purlins suitably for supporting the required thickness of insulation material beneath the metal roof.(b) S&F in replacement 22 SWG GI/ Aluminium wires supports for insulation.(c) S&F in replacement chicken wiremesh 12.5 mm x 22 SWG of hexagonal construction below the insulation for supporting the same.(d) S&F in replacement under deck insulation with bonded fibre glass wool of density 24 Kg/Cum, 50 mm thick, suitably factory laminated with aluminium foil backed up by scrim and Kraft paper (FSK), facing with 50 mm projection for overlap and butting.Note:- Insulating material shall be conforming to BS - 476, Part 4, 5, 6 & 7. |
| 179 | Supply and installation, testing, commissioning Outdoor type feeder piller Box made out of 3.15 mm thick CRCA sheet , 415 Volt, 3 phase , 50 HZ supply factory made & MS angle section 40 x40x 5mm frame with front and back openable double door with provision of locking arrangement dust & varmin proof , gasket, TPN busbar shall be insulated with colour coated heat shrinkable sleeves and shall be mounted on proper insulator, gland, welding hinges of dust proof duly spray painted inside and outside of panel with one coat of red oxide primer and two coat of synthetic enamel paint grey completeall as specifed abd directed& Connisting of the followingequipments:-(i) MCCB, 4 pole , 25 KA , 400 Amps adjustable to thermal MagneticRelease-01 No ( Incomming)(ii) MCCB , 4 pole ,16 KA, 63 Amps -03 No (Out going) (iii) ML-3 Contactor, 40 Amp - 02 Nos (III) Indication Lamp 22.5 mm dia LED type 240Volts AC to show three phase availability- 01 set MAKE : L & T/Secure/Conserv(v) Solid aluminium bus bar 400 Amp for 3 phase , 200 Amp for neutral(vi) PCC and block Mesonry work for grouting of panel complete all as specified and directed |
| 180 | M&L for Earth continuity conductorfixed to wall on batten or recess or chases or buried in ground or drawn in conduit/pipe or fixed to poles or any other indicated situation for loop earthing etc. as required 32 x 6 mm dia galvanised iron strip |
| 181 | Earthing complete with galvanised steel earth plate electrode 60×60cm.× 6mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less\"than 1.5 metres below normal ground level, connected to galvanised earth strip 32x6 mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No. 3 connected to earthing test point all as specified or indicated including testing on completion includingprovision of 40 mm GI Tubing, light grade and watering pipe shall be 20 mm bore GI light grade including excavation & earth work, PCC pit with CI cover, Charcol, salt, funnel, wire mesh, GI strip Up to 7.5 mtrs length complete all as specified and directed. |
| 182 | Supply, installation ,testing and balancing in repaire square shape supply air diffuser with removable core and antismudge ring and volume control dampers , power coated , extruded aluminium construction complete all specified and as directed. |
| 183 | Supply, installation ,testing and balancing in repaire square shape supply Return air diffuser with removable core and antismudge ring and withoutcontrol dampers , power coated , extruded aluminium construction complete all specified and as directed. |
| 184 | Supply and fixing GI Pipe 50 mm dia heavy class fixing on wall for ducting supports including making of hole in any type of wall and making good with plastering work, masonry work complete all as specified and directed. |
| 185 | S&F in replacement Acoustic treatment/ lining of area of AHUroom with 22 Gauge, GI channels of 50x50 mm size fitted at 600x600mm girds, fitted with 50mm thick, 32 Kg/cum fibber glass insulation, covered with fibber glass tissue and 24 Gauge Aluminium perforated sheet as required, The joint shall be with minimum overlapping of 75mm with 30mmx 3mmaluminium strip covering, All corners shall be provided with 20x20x2mm aluminium angle with stainless steel counter sunk screws complete all as specified and as directed. |
| 186 | Supply, installation, testing and commissioning, Ultra Sonic (Mist) Humidifier Model- RM-3 Capacity- 3 LPH, Type :- Horizontal (Indoor Unit),Construction:- Tank made from 1.5mm thick stainless sheet 304L grade sheet, Electrical panel constructed in 18 Gauge CRC Sheet,Controls:- (a) Low Level Cut-out- Mini Float Switch (b) Auto Drain System - Timer with Motorized valve for auto flushing (c) Filter Assembly - 5-10 micron air filter and 5-10 micron water filter. Mist Outlet fan with throw type bladeElectrical panel:- Power Supply (S.M.P.S), Contactor, MCB Relay card, connectors, On/off switch with Light, Auto Drain System, Indication for Drain valve / Humidity off/ Supply On/ Low Level. Paint:- Tank - Phiroza blue enamel paint complete all as specified and as directed. |
| 187 | Dismantling and taking out the old GI/AL ducting, grill, Supply air diffuser and return air diffuser etc with out disturbing the adjecent and making good the disturb surfaces |
| 188 | S & F of Ceiling rose,3 terminal , pvc/polycabonate, isulated body all as specified and directed. |
| 189 | M&L of submain wiring complete with 2 x6.0 Sqmm(nominal area) FRLS, PVC insulated, unsheathed and multistranded copper conductor cable ISI marked, and 1 x 6.0 Sqmm( same specification ) as earth wire complete all as specified and asdirected. |
| 190 | Supply and fixingof LED ceiling light fitting 15 watt, in round shape, surface/recess type cool/warm white with inbuilt driver as per site requirement and making all electric connections complete all as directed. |
| 191 | Supply and fixingof LED ceiling light fitting 10/12 watt, in round shape, surface/recess type cool/warm white with inbuilt driver as per site requirement and making all electric connections complete all as directed. |
| 192 | S&Fof energy efficicent LED fittings 45W LED 6K suitable for builing security light pressure die cast aluminium roadway luminaire with high power LEDs and HF electronic driver complete all as specified and asdirected. |
| 193 | S & F of street light bracket incl clamp, nut and anchor bolt etc make to shape for street light fitting made out of GI pipe light grade 25 mm bore 1.0 mtr long on bend to shapethe top of wall of existing building complete all as specified and directed. |
| 194 | S & Fof MCB B Curve type suitable for 240 volts AC supply, SP with over load and short circuit protection and rupturing capacity not less than 10 KA of capacity 6 to 16amps complete all as specified and directed. |
| 195 | S & F of Isolator suitable for 240 volts AC supply, SPN of capacity 32/40 Amps complete all as specified and directed. |
| 196 | S&F of wall mounted fan of pvc body 400mm sweep,Copper winding, 240 Volts. 50 Hz and depositing the old u/s to messtore yard,complete all as specified and as directed. |
| 197 | S&F BLDC (Brushless Direct Current) Ceiling Fan, 1200 mm suitable for regulator, not less than 6 service value , voltage 220V,having full copper motor winding & ribbed 3 Nos A/M blades.. The fan shall have BEE 5 star ratingand making necessary electric connection of suitable PVC copper wire from ceiling rose to ceiling fancomplete all as specified and directed. |
| 198 | S&Fof rigid non metallic PVC conduit 25 mm dia inclusive of all tees, bends, elbows, reducers, bell mouth tube ends and fixing accessories such as couplers, lock nuts, saddles, pipe hook etc complete surface mounted / concealed and making good the surface all as specified and and as directed. |
| 199 | Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 16 Sqmm 2 core. |
| 200 | M&L for sand cushioning to under ground cable provided with layers of snad(8 cms deep before laying the cable and 15 cms deep after laying) complete allas specified and directedat site by Engineer-in-Charge. |
| 201 | Supply and layingburnt bricks class - B for protection of cable complete all asspecified and directed at site. |
| 202 | M & Lfor laying of Galvanised Iron tubes light grade 80 mm dia for cable protection at site complete all as specified and directed. |
We are a group of professionals specializing in custom software development, web development, mobile app development, IOT base solutions, web design, graphics & Enterprise solutions provid.
Copyright © 2025 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
