Military Engineer Services-MES has published Tender For Petty Repairs To Otm And Md Accn Of Med Line, Vk Line, Makronia Complex, Engrs, 536 Asc, Rou, Hawk Hill Area Etc Under Ge Saugor. Submission Date for this Tender is 27-05-2024. Building Work Tenders in Saugor Madhya Pradesh. Bidders can get complete Tender details and download the document.
| Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
| 1 | 20-May-2024 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 27-05-2024 |
| FileName | File Description | File Size |
| efa39bc9-c774-4b3f-a862-d55dbc67d572.html | Tender Notice | 0 KB |
| BOQ_729505.xls | Tender Document | 0 KB |
| PARTICULARSPECIFICATIONS.pdf | Tender Document | 0 KB |
| TENDERDOCUMENTS.pdf | Tender Document | 0 KB |
| Tendernotice_1.pdf | Tender Document | 0 KB |
| Sl. No. | Item Description |
| 1 | Checking & attending complaints pertaining to joinery (wooden/ aluminum/) iron/ aluminium mongery, pelmet box, door springs, etc requiring carpentry work and carrying out minor repairs such as tightening/replacing of screws/nails, minor adjustment/easing of joinery, door etc. including petty repairs and material like screws/nails, plug, butt hinges 50/75mmetc. to make it functionalby providing minimum one carpenter/aluminium fabricator and one helper as per time to time requirement as intimated by JE concerned/ Engr-in-Charge (with necessary tools)complete all as specified and directed. Note : Any builders hardware items except mentioned above required to be replaced shall be paid seperatly under respective item. |
| 2 | Checking and attending to welding repairs works to steel windows, handles, door springs, iron frame of doors, rolling shutter of garages and other misc iron repair works by welding (run or spot welding as per site requirement) by providing minimum one welder and one helper alongwith welding machine, gloves, welding glass, welding rod etc or any other tools required, as per time to time requirement as intimated by JE concerned/ Engr-in-Chargeand whenever required complete all as specified and directed. |
| 3 | Checking of floor, plinth, plaster etc requiring masonary work and carrying out minor repairs such as broken edges patches etc, including petty repairs, material like sand, cement & stoneaggregates to make it functionalby providing minimum one mason and one helper as per time to time requirement as intimated by JE concerned/ Engr-in-Charge (with necessary tools) etc. complete all as specified and directed .Note:- Any items required to be replaced or major repair shall be paid under respective items. |
| 4 | Checking and attending to water leakage from taps, flushing cisterns, wash hand basins and other sanitary fittings/fixtures and any obstruction to water supply, requiring plumbing work and carryout minor repairs such as replacement of washers, check nuts, tightening of fittings of flushing cistern etc including petty materials like washers of all sizes, thread(shoot), caps/spindle for taps, M-seal, screws, nails etc to make water supply/ plumbing lines functional and leak proof by providing minimum one plumber and one helper as per time to time requirement as intimated by JE concerned/ Engr-in-Charge (with necessary tools) etc. complete all as specified and directed . Note : The complaints intimated to contractor shall be completed to the entire satisfaction of Engr-in-Charge within a period of maximum 02 days and an amount of Rs. 200.00 will be recovered for un-attended complaints. |
| 5 | Cleaning of blocked WC/ BATH//WHB/Sinktraps and CI /PVC pipe up to 1st manhole and removing all silt, residue sludge both organic and inorganic nature including any type of foreign material and removing waste material sludge etc to a distance exceeding 50 m any damage caused during cleaning shall be made good by the contractor to the entire satisfaction of Engr-in-Charge complete all as specified and directed Note : The complaints intimated to contractor shall be completed to the entire satisfaction of Engr-in-Charge within a period of maximum 24 Hrs. |
| 6 | M&L for treatement for sunken portion is as follows :- (a) Demolition of lean concrete and other type of filling in sunken portion & cleaned the sunken portion incl vertical wall surface complete as directed.(b) M&L for water proofing plaster for sunken portionin CM 1:3, 20 mm thick in two coats with water proofing compound at the rate of 2% by weight of cement and finishing the surface even and smooth without using extra cement.(c) M&L for applying two coats of Dr fixit compound suitable for sunkun treatment as per manufacturer instructions over vertical surfaces and floors of sunken of toilet including cleaning of surfaces. (d) M&L for PCC 1:7:12 type D2 using 40 mm graded stone aggregate as in filling (sunken portion)(e) M&L for PCC 1:2:4 type B0 using 12.50 mm graded stone aggregate, mixed with WPC @ 2% by wt. of cement, as sub base, 75mm thick on top. Note :- Above quoted rate includes (a) Test again of water tightness by pounding for 72 hours & rectify defects if any till total elimination of defect.(b) The sunken portion shall be tested for leakage / seepage / dampness by ponding with water for 72 hours. In case any defect is noticed the portion shall be grouted with Dr fixit suitable chemical & tested again. The process of grouting and testing shall be repeated till leakage / seepage / dampness is eliminated (c) Horizontalflat area to be measured. |
| 7 | M&L for cleaning and removing all scale and dirt, etc from water tanks of capacity exceeding 250 ltrs but not exceeding 500 ltrs and from mouth of circulating pipes, etc including disconnecting, reconnecting & refixing water tanks in position complete all as specified and directed. |
| 8 | M&L for cleaning and removing all scale and dirt, etc from water tanks of capacity exceeding 500 ltrs but not exceeding 1000 ltrs and from mouth of circulating pipes, etc including disconnecting, reconnecting & refixing water tanks in position complete all as specified and directed. |
| 9 | S&F 500 litres capacity rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top hoisted) three layered with cover and GI tank nipple and fixed in position including dismantling existing water tank etc complete all as specified and directed. |
| 10 | S&F 1000 litres capacity rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top hoisted) three layered with cover and GI tank nipple and fixed in position including dismantling existing water tank etc complete all as specified and directed. |
| 11 | Fixing only 500 litres capacity rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top hoisted) three layered with cover and GI tank nipple and fixed in position including dismantling existing water tank etc complete all as specified and directed. Note:- PVC water tank shall be issued under Sch "B" as free for fixing. |
| 12 | Fixing only 1000 litres capacity rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top hoisted) three layered with cover and GI tank nipple and fixed in position including dismantling existing water tank etc complete all as specified and directed. Note:- PVC water tank shall be issued under Sch "B" as free for fixing. |
| 13 | Taking down chowkats or frames with shutters (without taking off shutter from frames) of any type not exc. 1.5 Sqm each and removing from site complete all as specified and directed. |
| 14 | Taking down chowkhats or frames with shutters (without taking off shutters from the frame)of any type exc 1.5 Sqm and not exc 4 Sqm each and removing from site complete all as specified and directed. |
| 15 | Taking down shutters of any description not exc 1 Sqm including removing from site complete all as specified and directed. |
| 16 | Taking downshutters of any description exc 1 Sqm but not exc. 2 Sqm each including removing from site complete all as specified and directed. |
| 17 | M&L for second class hardwood plain, solid, straight chowkhat and frames, wrought framed rebated on the solid, rounded on the solid or chamfered put together with glue pinned at joints, supplied and fixed complete all as specified and directed. |
| 18 | M&L for 35mm thick second class hardwood rail and style plain framed panelled shutters (in two panels) locally fabricated with lock rails and panel of 9mm thick BWP comercial ply or 12mm veneered particle boad with comercial veneering on boath faces. The size of rail and stile as per IS-1003complete all as specified and directed |
| 19 | M&L for 35mm thick second class hardwoodglazed & skelton shutters locally fabricated open rebated and prepared to receive glass or gauge etc edges of framing plain chamfered or rounded fitted with cut and mitred beads rebated for securing glass etc.size of members of shutters as specified in SSR Part - 1, Section 8, clause 8.20 ( a ) complete all as specified and directed. |
| 20 | M&L for 30mm thick second class hardwoodglazed & skelton shutters open rebated locally fabricated and prepared to receive glass or gauge etcprovided with stiles and rails as specified in SSR Part I edges of framing plain chamfered or rounded fitted with cut and mitred rebated for securing glass etc.size of members of shuttersas per clause 8.24 (b) of SSR Part-I complete all as specified and directed. |
| 21 | M&L for30mm thick flush shutters, solid core construction with particle board core & plywood face panels, commercial type on both sidescomplete all as specified and directed. |
| 22 | M&L for preparing of surfaces of wood and wood based materils, steel or iron work, new or old and description and treating with tar, black paint etc ends of posts backs of chowkhatsarea tarred exc 0.10 Sqm but n. exc 0.50 Sqm each complete all as specified and directed. |
| 23 | S&F solid PVC frame (single rebated) of size 50mmx47mm made out of 5mm plain colour PVC sheet reinforced with mild steel square tube complete all as specified and directed. |
| 24 | S&F factory made solid PVC moulded door shutter, 28 to 30mm thick (stiles), with 2, 4, or 6mm raised panel design with 5 mm thick moulded PVC sheet on the front face & 5 mm prelam PVC sheet on back face, complete all as specified and as directed. |
| 25 | S&F mild steelplain angle cleats for securing purlins ,and similar small articles conforming to Fe 290Gde E 165 as in hold fasts complete all as specified and directed. |
| 26 | M&L for PCC 1:3:6type C-1 using 20mm graded stone aggregates) as in bed blocks for hold fastcomplete all as specified and directed. |
| 27 | S&Fmild steel tower bolt 200 mm long stove enamelled black with bright bolt fixed with screw complete all as specified and directed. |
| 28 | S&F mild steel tower bolt 150 mm long stove enamelled black with bright bolt fixed with screw complete all as specified and directed. |
| 29 | S&F mild steel pressed handles, oval type stove enamelled black 125 mm long fixed with screw complete all as specified and directed. |
| 30 | S&F mild steel butt hinges, 100 mm size, medium weight, cold rolled fixed with screws/welding to wooded/steel frames or chowkats, complete all as specified and directed. |
| 31 | S&F butt hinges "medium weight", cold rolled mild steel 75 mm size, complete all as specified and directed. |
| 32 | S&FAluminium anodised barrel tower bolt 150 mm long of extruded section cast aluminium alloy complete all as specified and directed.. |
| 33 | S&F floor door stopper of aluminium alloy body and tongue, anodized, with hard drawn steel fixed in floor with over all length of cover plate 140 mm complete all as specified and directed |
| 34 | S&F150 mm, ordinary rat tail rod pattern springs of brass including roller and roller plate complete all as specified and directed |
| 35 | S&F aluminium alloy, anodised, sliding door bolt 300 mm long, with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts & sliding bolts of extruded sections or cast aluminium alloy complete all as specified and directed |
| 36 | S&FAluminium handles, cast typeanodised 150 mm long of extruded section cast aluminium alloy complete all as specified and directed. |
| 37 | S&F stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed. |
| 38 | S&Fsheet glass, 3 mm thick, selected quality fixed with clips and putty complete in squares n.exc 0.50 Sqm each panecomplete all as specified and directed. |
| 39 | M&L for preparation of new wooden surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed. |
| 40 | S& F in repair glazed (5.0 mm thick plain /coloured glass)aluminum door powder coated consisting of frame of 63mm x 38 mm size with shutter fixed on frame both side openable on pivotal arrangement with including necessary cutting holes in wall & floorDoor shutter consists of top rail size is 83 x 44 mm , bottom rail &lock rail size is 110 x 44 mm & style of door shutter is 83mmx 44 mmwith handles 2 Nos in each door , hinges has fitted on frame as requiredfixed with rubber gasket & aluminum beading any No of panels with aluminum handle ,locking arrangement,floor spring and floor door stopperincl. necessary joining cleats , glazing clipsetc complete (Al. section thickness 2 mm} ) confirming to IS. Make - Jindal Aluminum / Man Industries or equivalent as approved by GE. |
| 41 | S&F in repair double action floor spring hydraulically regulated, made up of min 1.25mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governingpivot made of brass, other parts made of mild steel heavy duty and fixed complete all as specified and directed. |
| 42 | S&F in repair powder coated aluminium ventilators of Aluminium section weighing not less than 0.55kg/m, partially fixed and partially openable either top hung or side hung and bottom portion fixed having 4mm thick frosted glass and top portion having two shutters external shutter with 4mm thick frosted glass and interal shutter having stainless steel wiremesh 0.36mm diafor Bath / WC including rubber gasket and alumium beading with necessary cleats / locking arrangement complete all as per standard engineering practice including necessarycutting holes on wall and floorcomplete all as specified and directed. |
| 43 | S&Fin repair aluminium windowssliding type three track powder coated consisting of frame bottom with gutter of sizemin 92.34 X 39 mm,sideand top of size min 92.34X29.70, shutters vertical 39X20 mm,shutter top &bottom of size min 20X39 mm ,shutter interlock min size 39X20 mm with rollers and conceled locking arrangements with 4 mm thick tintedglass with rubber gasket,brush and aluminium beading , ,aluminium grill with fixing arrangement (wt. of grill not less then 2.50 kg/sqm),aluminium wire mess 0.45 mm diaetcincluding necessarycutting holes on wall and floor and confirming to IS complete all as directed (Al. section thickness 1.50 mm } |
| 44 | S&F in repairs hasp and staple 125 mm size, safety type, aluminium anodised including bolt to hinge plate, fixed in repairs with screws complete all as specified and directed |
| 45 | S&F in repair mild steel pressed handles, oval type, stove enamelled black, 150 mm size complete all as specified and directed |
| 46 | S&F in repair butt hinges "medium weight", cold rolled mild steel 75 mm size, fixed in repairs complete all as specified and directed. |
| 47 | S&F in repair continuous piano hinges mild steel bright finish or electro galvanized with open flap width 30 mmcomplete all as specified and directed |
| 48 | S&F in repair 150 mm, ordinary rat tail rod pattern springs of brass including roller and roller plate complete all as specified and directed. |
| 49 | S&F in repairsstainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm fixed with tinned tack or stainless steel wire staple complete all as specified and directed. |
| 50 | S&F in repair extruded aluminum alloy handle,fabricated type,anodized 125 mm size, complete all as specified and directed |
| 51 | S&F in repair aluminum, anodized, barrel tower bolts of extruded section 150 mm long,complete all as specified and directed |
| 52 | S&F in repair aluminum, anodized, barrel tower bolts of extruded section 100 mm long, complete all as specified and directed |
| 53 | S&F in repair butt hinges "medium weight", cold rolled mild steel 100 mm size, complete all as specified and directed |
| 54 | S&Fin repairs door closer hydraulically regulated designation No-3, (Aluminium die cast body) universal type,suitable for door shutters of 851 to 1000mm in width and weight between 61 to 80 kgs complete all as specified and directed. |
| 55 | Fixing only in repairs door closer hydraulically regulated, aluminium body, designation No. 3, universal type, suitable for door shutters of weight between 61 to 80 Kg,complete all as specified and directed. Note:- Door closer shall be issued under Sch "B" as free for fixing. |
| 56 | S&F in repair aluminium alloy, anodised, sliding door bolt 300 mm long, with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts & sliding bolts of extruded sections or cast aluminium alloy complete all as specified and directed |
| 57 | S&F in repair mild steel sliding door bolts 300 mm long, hasp staple type, stove enamelled black, with bright bolt not less than 12 mm dia with and including a minimum of 6 bolts and nuts, complete all as specified and directed |
| 58 | S&F in repair second class hardwood plain fillet sectional area not exceeding 3 Sqcm for glazed or gauged Joinery, ceiling including secured with nails,complete all as specified and directed |
| 59 | S&F in repair plain fillets of second class hard wood, square or rectangular in section, wrought, bull nosed, splayed, chamfered or rounded on one edge or face, fixed with screws; sectional area exceeding 6 Sqcm but not exceeding 13 Sqcm complete all as specified and directed |
| 60 | S&F in repair plain fillets of second class hard wood, square or rectangular in section, wrought, bull nosed, splayed, chamfered or rounded on one edge or face, fixed with screws; sectional area exceeding 13 Sqcm but not exceeding 25 Sqcm complete all as specified and directed |
| 61 | S&F in repairfloor door stopper of aluminium alloy body and tongue, anodized, with hard drawn steel fixed in floor with over all length of cover plate 140 mm complete all as specified and directed |
| 62 | S&F in repair rubber door seal 32 mm wide with Aluminiumstrip of size 19 mm wide fixed with machine steel screw with washer suitable for aluminium / wooden door shutters complete all as specified and directed. |
| 63 | Hacking out old broken glass of (any thickness, size ,quality or description) from metal frame /wooden frame fixed with clips and putty complete all as specified and directed. |
| 64 | S&Fsheet glass, 3mm thick, selected quality fixed with clips and putty complete in squares n.exc 0.50 Sqm each panecomplete all as specified and directed. |
| 65 | S&F 4mm thick Sheet glass ordinary quality frosted on side fixed wdn beads / oil putty in square n. ex 0.50 sqm in each pane complete all as speified |
| 66 | S&F in repairs of Plain Aluminium sheet 0.71mm thick as in wall / door cladding complete all as specified and directed |
| 67 | S & F in repair framed work such as grills,gratings /doors etc with ends of bars shouldered and/or riveted or forged into spikes,framed guard bars,barred iron doors, angle iron chowkhats, AC stand/chajja, ladders,framed balusters,walk ways,railings,framework of water tanks, and similar work conforming to Fe-410-0 including dismantling old wrought iron or mild steel work of any description not otherwise provided complete all as specified and directed. |
| 68 | S&F in repairs18mm/19 mm prelaminated particle board,interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work or angle iron chowkhat complete all as specified and directed. |
| 69 | M&Lsecond class hardwood plain fillets square, rectangular in section clean sawn, secured with nails or brads area exc. 13 but n exc. 25 sqcm complete all as specified and directed. |
| 70 | S&F in repairs PVC connection 15mm dia and 45 cm long with 2 Nos PTMT check nuts with washers complete all as specified and directed. |
| 71 | S&F in repairs 32/40mm dia and 80 cm long PVC waste pipe complete all as specified and directed |
| 72 | S&Fin repair 32mm/40mm dia Sink/Wash hand basin waste coupling of PTMT of ISI Markedcomplete all as specified and directed. |
| 73 | S&F in repairs 20mm Ball valves, high pressure of PTMTwith high density plastic ball screwed for iron pipe and fixed(min wt 20mm - 210 gms) complete all as specified and directed |
| 74 | S&F in repairs 25mm Ball valves, high pressure of PTMTwith high density plastic ball screwed for iron pipe and fixed(min wt 25mm - 455 gms) complete all as specified and directed |
| 75 | S&F in repairs 15mm Ball valves, high pressure of PTMTwith high density plastic ball screwed for iron pipe and fixed(min wt 15mm - 142 gms) complete all as specified and directed |
| 76 | S&F in repairs vitreous China wash hand basins,white with pedestal flat size 550x400mm excluding taps, chain and plug and porcelain stopper but including CP Brass waste coupling, waste pipe & brackets) complete all as specified & directed. |
| 77 | S&F in repairs 15mm Bib tap standard of PTMT any colour screwed, for iron pipe and fixed (Minimum weight 15mm - 90 gms / 20 mm - 125 gms) complete all as specified and directed |
| 78 | S&F in repairs 15mm dia bib tap with capstan head, screwed down, screwed for iron pipe, fancy type, cast copper alloy, chromium plated complete all as specified and directed. |
| 79 | S&F in repairs15 mm dia pillar taps, cast copper alloy fancy type with capstan heads, chromium plated,screwed down high pressure,with or without lettered Hot or Cold with long screwed shanks and fly nuts screwed for iron pipe & fixed complete all as specified & directed. |
| 80 | S&F in repair 15 mm bore angle valve/ stop cock , cast copper alloy fancy type screwed down high pressure with capstain head with long shank & cup complete all as specifed and directed. |
| 81 | S&Fin repair 15 mm bore CP Basin mixer/Sink mixer for mixing hot & cold water screwed down for iron pipe & fixed complete all as specified & directed. |
| 82 | S&F in repairs brass chromium plated Wall mixer for mixing Hot & Cold water with arrangement of head shower ,high pressure, screwed down for 15mm bore iron pipe fixed in repairall as specified and directed. |
| 83 | Fixing only in repair 15 mm bore CP wall or WHB mixer for mixing hot & cold water screwed down for iron pipe & fixed complete all as specified & directed. Note:-CP mixer shall be issued under Sch "B" as free for fixing. |
| 84 | S&Fin repair CP Hand shower/Heath faucet with 8mm dia , I meter long flexible tube & wall hook complete screwed for iron pipe bore dia 15mm. Make :Jaquaror equvalent |
| 85 | S&Fin repair CP Jet spray with 8mm dia , I meter long flexible tube & wall hook complete screwed for iron pipe bore dia 15mm complete all as specified and directed. Make :Jaquaror equvalent |
| 86 | S&F in repairs vitreous China, wash down water closet pan (pedestal pattern) white (excludingflushing cistern and flush pipe) WC complete all as specified and directed. |
| 87 | S&F in repair vitreous China squatting pan “ORISSA” pattern size 580mm X 440mm, white with P or S trap front or back inlet with integral foot rest (excl flushing cistern & flush pipe) &including connection to trap & to flushing pipe anti syphonage pipe etc complete including making good to floor complete all as specified & as directed. |
| 88 | S& Fin repairs of 75mm dia PVC (SWR) multi floor trap with Hinge type SS grating including jointing with solvent cement complete all as specified and directed |
| 89 | Fixing onlyin repairplastic water closet seat cover for recessed or flat EWC/anglo indian type WC, white, with flat bottom and cover incl. PVC or chromium plated hinging device complete all as specified and directed. Note:- Seat cover shall be issued under Sch "B" as free for fixing. |
| 90 | S&F in repair PVC valve less syphonic action type flushing cistern 10 ltr capacity, low level, white with inlet, ball valve, float and handle including brackets and connection to pipes and fixing of chain and pull or lever if any complete all as specified and directed. |
| 91 | S&F in repair PVC covers suitable for 500/1000 ltr capacity water storage tank complete all as specified and directed. |
| 92 | S&F in repair 15 mm medium grade galvanised steel tubes with all fittings and fixed complete to walls and ceilings or laid in floors complete all as specified and directed. |
| 93 | S&F in repair 20 mm medium grade galvanised steel tubes with all fittings and fixed complete to walls and ceilings or laid in floors complete all as specified and directed. |
| 94 | S&Fin repair 15mm GI fittings like Socket, Nipple, Elbow, Tee or union etc complete all as specified and directed. |
| 95 | S&Fin repair 20mm GI fittings like Socket, Nipple, Elbow, Tee or union etc complete all as specified and directed. |
| 96 | Cutting chases, pinning in, in brick wall making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring. etc. and making good, in cement mortor 1:3 cutting not exceeding 10cm girth complete all as specified and directed. |
| 97 | M&L for vitrified light/Dark shade Ceramic tiles 8 to10 mm thickarea of each tile exc 0.18 sqm & not exeeding 0.36 sqm,in floors/Skirting etc set & jointed in neat cement slurry and pointed in white or coloured cement to match the shade/colour of tiles laid over & including rendering 15mm thick CM (1:6) screed bed or backing coat incl dismantling of old exisitng tiles or flooring of any description & removing rubbish outside MoD land complete all as specified and directed. |
| 98 | M&L for non skid coloured ceramic 7 to 8mm thick floor tiles(square/rectangular) area of each tile exc 0.11 sqm but n exc 0.18 sqm in floors etc set & jointed in neat cement slurry and pointed in white or coloured cement to match the shade/colour of tiles laid over & including rendering 15mm thick CM (1:6) screed bed or bedding layer incl dismantling of old existing tiles or flooring of any description, removing rubbish outside MoD land complete all as specified and directed. |
| 99 | M&L glazed ceramic coloured tiles in vertical surface size 300mm x 600mm or 300mmx450mmx7mm thick or 250mm x 330mm x 7 mm thick (As approved by user) set and jointed in neat cement slurry and pointed in in white or coloured cement to match theshade/colour of tiles laid over & including rendering 15mm thick in CM (1:4) as in backing coat incl dismantling of old existing tiles or terrazzo finish, removing rubbish outside MoD land complete all as specified and directed. |
| 100 | M & L for coloured designer tiles exterior grade ( ENDURA OR Equivalent ) 10 mm thick over and including 15 mm thick cement mortor 1:6 set and jointed in floor and pointed in neat cement slurry with grey cement and pigment in floorincl dismantling of old existing tiles or flooring of any description, removing rubbish outside MoD land complete all as specified and directed. |
| 101 | M&L for machine pressed precast cement concrete coloured chemically treated interlocking paver block any shape and size conforming to IS-15658-2006 of 60 mm thickness M-35 grade with grey cement and pigmentlaidover and including 40mm thick uniformly levelled surface ofstone dust cushioning including dismantling of floor tiles complete all as specified and directed. |
| 102 | Taking down cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water complete all as specified and directed |
| 103 | M&L for 15 mm thick plaster in CM ( 1:6 ) on fair faces of brick work or concrete surfaces finished top surface even and smooth without using extra cement complete all as specified and directed. |
| 104 | M&L for rendering 20mm thickcement plaster in CM 1:6onstone masonarysurfaces in two layers (10mm dubbing coat and 10mm finishing coat ) the surfaces fair and even etc complete all as specified and directed. |
| 105 | Demolition of brick work or stone/boulder masonry, built in cement mortar mortor incl all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed |
| 106 | M&L for brick work using sub class B bricks (old size) straight or curved on plan exceeding 6m mean radius built in CM (1:6 complete all as specified and directed. |
| 107 | M&L for walling of random rubble wall bonded, beddedand solidly hearted built in CM(1:6) complete all as specified and directed |
| 108 | All as per Srl item No.107 above but except stone. Note:-Serviceable stones obtained from Srl item No. 105 above shall be re-used in this item. |
| 109 | M&L for preparation of newly / plastered surface of wall an applying two coats of Acrylic washable distemper over a coat of primer with alkali resistant complete all as specified and directed. |
| 110 | M&L for applying three coats of white washincluding preparaion of newly plastered surfacecomplete all as specified and directed |
| 111 | M&L for applying two coats of cement base paint of approvedcolouredincluding preparation of newly plastered surfacecomplete all as specified and directed |
| 112 | M&L fortwo coat of synthetic distemper over a coat of Birla/JK wall care putty or equivalent, 1mm thick in two layers for levelling true surfaces over interior primer all as per manufacturer"s instruction on wall/ celing surfacesincluding completely removing existing treatment on surfacecomplete all as specified and directed |
| 113 | Demolition of cement concrete of any description and inany position etc completeall as specified and directed. |
| 114 | M&L for providing PCC 1:3:6 type C1 (using 20mm graded smechanically tone aggregates) as in window or door cills, lintels, bressumers, steps, quoin blocks (for use with masonry), string courses, copings. kneelers, apex stones, pier caps, columns, posts, boundary pillars, bed plates, pintle blocks, anchorage blocks, bonders (for stone wallin). corbels, brackets, etc. (of any section indicated), with plain fair faces, including chamfers, weatherings, throating etc. and setting in CM(1:6) complete with joints to match complete all as specified and directed |
| 115 | M&Lfor 75mm thick PCC 1:4:8, type D-2 (using 40mm graded stone aggregates) as in sub base of floors complete all as specified and directed. |
| 116 | M&L 25 mm thick PCC (1:2:4) type B1 (using 20 mm graded stone aggregate) as in sub base of floor to receive tiles or kota stone complete all as specified. |
| 117 | M&L for PCC 1:3:6 type C-2 (using 40mm graded mechanically crushed stone aggregate) as in foundation fillings and mass concrete complete all as specified and directed . |
| 118 | M&L for preparation of new steel surfaces of steel and iron work of any description over 10 cm width or girth and applying two coat of synthetic enamel paint over one coat of red oxide primer complete all as specified and directed. |
| 119 | Demolition of reinforced cement concrete of any description and inany position completeall as specified and directed. |
| 120 | M&L for providing pre cast Reinforced cement concrete type B1 1:2:4 (20mm graged aggregate)in window or door cills, lintels, bressumers, steps, quoin, blocks, cover slabs , shelves and set in cement mortar 1:4 (Reinforcement shall be measured and paid separately) completeall as specified and directed. |
| 121 | M&L for 10mm dia and over TMT bars cut to length, bent to shape required includingcranking bending spirally for hooping for columns hooking ends and binding with and including mild steelwire (annealed) not less than 0.9mm dia or securing with claps completeall as specified and directed. |
| 122 | M&L for 6 to 8mm dia and over TMT bars cut to length, bent to shape required includingcranking bending spirally for hooping for columns hooking ends and binding with and including mild steelwire (annealed) not less than 0.9mm dia or securing with claps completeall as specified and directed. |
| 123 | S&F in repair mild steel 19mm/20mm tubular rod, 1.6mm thick,fancy type including PVC golden colour brakets,latto and wall to wall socketcompleteall as specified and directed. |
| 124 | Fixing only in repairs curtain rodincluding PVC brackets, latto and wall to wall socketetc complete all as specified and as directed. Note:- Curtain rod shall be issued under Sch "B" as free for fixing. |
| 125 | S&F in repair sinks with drainage boardmade of stainless steel 1 mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm complete all as specified and directed. |
| 126 | Fixing only in repairs sinks made of stainless steel kitchenwith plugs, washers, Coupling& down take waste piple including bedding in CM onto dwarf wall or including fixing cantilever brackets & connecting union to pipe, etc complete all as specified and as directed.Note:- Kitchen sink shall be issued under Sch "B" as free for fixing. |
| 127 | S&F in repairs stainless steel kitchen rack plate rack over all size (36" x 30"x 10") made out of stainless steel sheet complete all as specified and as directed. |
| 128 | S &F corner Glass self with brackets of Jaquar or equivalent make as approved by GE complete all as specified and as directed. |
| 129 | S&Flooking mirror 600mmx450mm bevelled edge 6mm thick selected quality glass, mounted on 6mm thick commercial ply wood and aluminium frame around and fixed to wooden plug with CP brass screws and cup washers complete all as specified and directed. |
| 130 | S&F in repairs tubular towel rail, 20mm dia, ‘D’ type 60cm long between flanges of brass CP complete all as specified and directed. |
| 131 | S&F in repair toilet paper holder, box type of brass, chromium plated fixed to walls with chromium plated brass screws complete all as specified and directed. |
| 132 | Taking down old unservicable SWR pipe of any dia iclcuding fittings complete all as specified and as directed |
| 133 | S&F in repair 110 mm dia PVC(SWR) pipes single soketed in any length with adhesive jointed fixed to wall with mild steel clamps & laid intrenches or in floors. complete all as specified and directed. |
| 134 | S & F in repair75 mm dia PVC(SWR) pipes single soketed in any length with rubber ring jointed fixed to wall with mild steel clamps and laid in trenches or in floors.complete all as specified and directed. |
| 135 | S & F in repairPVC (SWR) bends 110 mm dia complete all as specified and directed. |
| 136 | S & Fin repairPVC (SWR) bends 75 mm dia complete all as specified and directed. |
| 137 | S & F in repairPVC (SWR) junction single ( single T ) equal or unequal 110mmdia complete all as specified and directed. |
| 138 | S & F PVC in repair(SWR) junction single ( single T ) equal or unequal 75mmdia complete all as specified and directed. |
| 139 | S & F in repairfor 75 mm dia PVC ( SWR) floor trap with grating including jointing with solvent cement complete all as specified and as directed |
| 140 | S&F in repairPVC (SWR) vent cowl 110mm dia complete all as specified and as directed |
| 141 | S & F GI ( cold rolled) snap grid size of 600mm x 600 mm frame work of 24 x 38 x 0.60 mm, Tee Section ( bottom pre coated ) and 24 x 24 x 0.5 mm thick angle rung along the wall incl GI suspenders wire of dia 4mm as per manufacturer instruction as in ceiling with and including S&F whitenon asbestos designer ceiling cement boards 4 mm thick complete all as specified and directed. |
| 142 | Demolition of existing ceiling boards (fiber, pulp, insulation, etc.) or insulation board/slabs/blankets, any thickness, including frames complete all as specified and directed. |
| 143 | M&L for18-20 mm thick Graniteof any shade( table rubbed and polished ) in steps, jambs, pillars, window cills, cooking plateforms and like including rendering 10mm thick in cement mortar (1:4)including pointing in whitecement 1:2 using marble dust with admixture of pigment to match shade of the slabsincl dismantling of old exisitng granite complete all as specified and directed |
| 144 | M&L for rounding/ chamferringto edges of stone slabss one edge, such as in steps, cooking plateform and othersimilar situations complete all as specified and directed |
| 145 | Dismantling of Asbestos cement ( corrugated, semi corrugated, ec) sheets roofing complete all as specified and as directed |
| 146 | S&F 6mm thick Asbestos cement, corrugated or semi corrugated sheets in roof walls etc fixed with J / L bolts complete all as specified and as directed |
| 147 | All as per Srl itemNo. 146.00 above but except sheetsNote:- Serviceable AC sheets obtained from Srl item No. 145.00above shall be re-used in this item completeall as specified and directed. |
| 148 | S&F Asbestos cement two piece adjustable plain wing ridge 6mm thickfixed with J / L bolts complete all as specified and directed |
| 149 | S&F pre-painted galvatume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering fixed with self tapping screws complete all as specified and directed |
| 150 | S&F Rolled sectionsor Hollowtubesas in main and cross beams, hip and jack rafters, Posts,purlins where connected to common raftersfixedd with angle cleats or other connecting plates (Fe 290 Gde E 165) |
| 151 | Dismantling framed timber scantlings 40 sq. cm & over in section, in any position completeall as specified and directed. |
| 152 | S&Fin repairsplastic water closet seat cover for recessed or flat EWC/Anglo Indian type WC, white, with flat bottom and cover incl. PVC or chromium plated hinging device complete all as specified and directed. |
| 153 | S&F in repair vitreous china Half stall urinal make jaquar or equivalent colour white or Ivory complete with connecting all fitment including CP waste coupling ,waste pipe etc completeall as specified and directed. |
| 154 | S&F in repair vitreous china floor mounted closet single piece (including flushing cistern) P or S trap colour white or Ivoryof complete with connecting all fitment including UFseat cover with all accessories of jaquaror equivalent all as specified and directed. Make : Jaquar cat No. ARS-WHT-0920BP or equivalent |
| 155 | S&F in repair purposely moulded looking mirror 5 mm thick glass fixed with studs completeall as specified and directed. |
| 156 | S&F in repair vitreous china table top basin of size 360X510X120 jaquar cat no- FLS-WHT-5931or equivalent and half pedestaljaquar cat no- CNS-WHT-305or equivalent colour white or Ivory complete with connecting all fitment including CP waste coupling ,waste pipe etc complete all as specified and directed. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
