Public Works Department-PWD has published Tender For Construction Of Office Accommodation For District Consumer Dispute Redressal Commission In Kargil (Raising Of 1St Floor Over The Existing Building ). Submission Date for this Tender is 10-05-2024. Building Work Tenders in kargil Jammu And Kashmir. Bidders can get complete Tender details and download the document.
Sl. No. | Item Description |
1 | Dismantalling of steel truss including stacking of serviceable / un serviceable material. (The servuceble / un-servecable dismantled materialto hand over the concerned department in presence of JE incharge) |
2 | Dismantling of CGI Sheet roofing including ridges or hips, eves boarding /weather boardingand stacking of serviceable / un serviceable material.(The servuceble / un-servecable dismantled materialto hand over the concerned department in presence of JE incharge) |
3 | Dismantling of wooden planks including wood work in flase ceiling andmud pushka complete .(The servuceble / un-servecable dismantled materialto hand over the concerned department in presence of JE incharge) |
4 | Dismantaling of teakply ceiling including cornice complete.(The servuceble / un-servecable dismantled materialto hand over the concerned department in presence of JE incharge) |
5 | Demolishing RCC / PCC work manuallyincluding stacking of materials and disposal of unserviceable material within 50 meters lead as per direction of Engineer-in-charge.(The dismantled items to hand over the concerned department in presence of JE incharge) |
6 | Earth work in excavation by manual means in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10sqm on plan, including dressing of sides and ramming of bottoms lift up to 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed: |
7 | All kinds of soil : |
8 | Ordinary Rock |
9 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centering and shuttering. All work up to plinth level with:1:3:6 (1 cement: 3 coarse sand: 6 graded stone aggregate 20 mm nominal size).including all carriage . |
10 | Reinforced cement concrete work in walls (any thickness) including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts upto floor five level including curing but excluding cost of centering shuttering, finishing and reinforcement.M 20 grade 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size) . |
11 | Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15°, landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto five level including curing but excluding the cost of centering, shuttering, finishing and reinforcement with1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size). |
12 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth levelThermo-Mechanically Treated bars of grade Fe-500D or more. |
13 | Centering and shuttering including strutting, propping etc. and removal of form workfor:Walls (any thickness) |
14 | Foundation, footing ,bases of columns etc. |
15 | Walls (any thickness) including attached pilasters, buttresses, plinth and string courses etc. |
16 | Columns, pillars, piers, abutments, posts and struts. |
17 | Suspended floors, roofs, landings, balconies and access platforms. |
18 | Lintel, beams, plinth beams, girders, bressumers and cantilevers. |
19 | Edges of slabs and breaks in floors and walls |
20 | Providing and fixing up to floor five level precast cement concrete solid blocks including hoisting and setting in position with cement mortar M10 grade 1:3:6 with 20 mm nominal size stone aggregate. |
21 | Providing wood work in frames of doors, windows , clerestory windows,wrought frame and fixed in position of first class kail wood. |
22 | Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows fixing with butt hinges of required size with necessary screws, excluding panelling which will be paid for separately, all complete .35 mm thick 1st class kail wood. |
23 | Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick.of 1st class kail wood. |
24 | Providing & fixing 30mm thick wire gauze shutters using galvanized M.S wire gauze of average width for aperture 1.4mm with wire of dia.0.63mm for doors, windows and clerestory windows including ISI marked bright finished or / and black enameled M.S. butt hinges with necessary screws. of 1st class K-wood. |
25 | Providing 40x5 mm flat iron hold fast 40 cm long including fixing to frame with 10 mm diameter bolts, nuts and wooden plugs and embedding in cement concrete . |
26 | Filling of available excavated earth (excluding rock) in trenches, plinth, side of foundation etc. Layers not exceeding 20 cm in depth, consolidation each deposited layer by ramming and watering lead up to 50 mtr and left up to 1.5 m. |
27 | 15mm Cement plaster on the rough side of single or half brick wall of mix:1 : 4 ( 1 cement : 4 fine sand) |
28 | Cement concrete flooring 1:2:4 finished with floating coatof neat cement incld. Cement slurry, but excluding the cost of nosing of steps etc. complete 50mm thick with 20mmnominal size stone aggregate. |
29 | Providing and applying plaster of Paris putty of 2mm thickness overplastered surface to prepare the surface even and smooth complete. |
30 | Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade . New work two or more coat including priming coat with cement primer. |
31 | Finishing walls with acrylic smooth exterior paint of required shade on New work (Two or more coats applied @ 1.67 liter/10sqm over and including priming coat of exterior primer applied @ 2.20kg/10sqm). |
32 | Applying priming coat with ready mixed pink or grey primer of approved brand and manufacture on wood(hard and soft surface). |
33 | Painting with synthetic enamel paint of approved brand and manufacture to given an even shade two or more coats on new wood surface. |
34 | Providing / Fixing 4mm thick glass panes for windows including 1st class kail wood bending. |
35 | Providing and fixing flat iron3 35 x 5mm including nuts and bolts for wooden truss. |
36 | Providing hoisting and fixing trusses/purlins /rafters/posts/ post-plates or like components including cost of screws etc.First class Budloo/Fir wood |
37 | P/F pre coated galvanized iron profile sheet (size , shape and pitch of corrugation as approved by Engineer0.5mm thickness etc including all accessories etc coloredprofile sheet. |
38 | Providing and fixing ridges/ hips width 60mm over all width plane G.S Sheet fixed with polymer coated screw etc. |
39 | Providing and fixing whether boarding of 20 mm thick 2nd class kail wood planks ( plained on one side ) overlap 20 mm minimum. Complete including nail etc. |
40 | Providing and fixingeves boarding of 1st class kail wood(300x35) mm nominal size including nail complete.. |
41 | Providing and laying vitrified floor tiles in different sizes (thickness tobe specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622 of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1cement :4 coarse sand) including grouting the joints with white cement and matching pigments etc. complete i.e Size of tile 600x600 mm (Kajaria/Somany/Cera or Any approved Brand as per Engineer In charge) |
42 | P/F 1st quality ceramic glazed wall tiles conforming to IS:15622 (thickness to be specified by the manufacturer) of approved make in colours, shades except burgundy bottle green, black of any size asapproved by engineer-in-charge in Skirting, risers of steps, and dados, over 12 mm thick bed of cement mortar 1:3 ( 1 cement : 3 course sand) and jointing with grey cement slurry @3.3kg/sqm including pointing the joint with white cement and matching pigments etc., complete. |
43 | Providing and fixing white vitreous china pedestal type water closet (European type W.C . .pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern including flush pipe with manually controlled device (handle lever) conforming to IS:7231, with all fittings and fixtures, complete including cutting and making good the walls and floors wherever requied: |
44 | W.C. pan with lSI marked white solid plastic seat and lid. JAGUAR/CERA Make |
45 | Providing and fixing wash basin with C.I./M.S. brackets, 15mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever required: |
46 | White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar taps JAGUAR / CERA/HINDWARE Make |
47 | P/F of mirrors of superior glass with plastic moulded frame(of approved quality) and of required size and shape. With 6mm thick hard board backing. Rectangular Shape 1500 x 450 mm |
48 | Providing and fixing soil waste & vent pipe (Prince or any other appoved brand as per Engineer In Charge |
49 | PVC Pipe. 110mm dia (10 feet unit Length) |
50 | PVC Pipe. 75mm dia (10 feet unit Length) |
51 | P/F of PPR pipeincld. All bend, tee, elbow,reducer,gate value as required at site etc |
52 | 32mm |
53 | 45/50mm |
54 | Insulation of internal pipings with heat cable inulation. |
55 | P/F of bathroom accessories incld all fixtures |
56 | Gyzer(25Ltr) |
57 | Stop cock |
58 | Bib cock |
59 | Greeting |
60 | sintex |
61 | 1.5HP motor with all accessories |
62 | Providing and fixing 4layer syntax 1000ltr of Pufincld. All necessary fixture complete |
63 | Providing and fixing Door windows accessories. |
64 | L-Drop 250mm long(brass) |
65 | Handle (6”) long |
66 | Handle (4”) long |
67 | Tower Bolt (6”) long |
68 | Tower Bolt (4”) long |
69 | P/F CP brass toilet paper holder including cost of wodden, PVC, Play etc. |
70 | P/F of PTMT Towel rail. |
71 | P/F and fixing wall mount Liquid Soap Dispenser of approved brand. |
72 | Providing and fixing angle iron stand include welding, cutting all. |
73 | Providing and fixing stainless steel railing including all fixture complete job. |
74 | Providing and fixing of laminated flooring including laying of thermalcole etc (Action Tessa) |
75 | Flooring of Marble stone of specified thickness as per sample of marble approved by Engineer in charge over 20mm average thick base of cement. |
76 | Wiring for light point/fan point/exhaust fan point/call bell point with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable in Existing surface/recessed medium class PVC conduit ,with modular switch,modular plate,suitable GI Box and earthing the point with 1.5 sq. mm FR PVC insulated copper conductor single core cable etc. as required. |
77 | Wiring for circuit/sub mains wiring along with earth wire of the following size of FR PVC insulated copper conductor single core cable in surface/recessed medium class PVC conduit as required. |
78 | 2x2.5 sq.mm +1x2.5 sq.mm earth wire. |
79 | 2x4 sq.mm + 1x4 sq.mm earth wire. |
80 | 2x 10 sq.mm + 1x6 sq.mm earth wire. |
81 | S/F following specification of surface/recessed LED lighting fixtures: |
82 | Batten holder including 12W LED lamp with Square Block with complete accessories. |
83 | LED 12W surface panel of lumen more than 1100 Round Shape |
84 | S/F of 1200mm sweep 3 blades,energy efficient 5 star ceiling fan complete with assembling of blades,down rod,shackle insulator,canopy etc,including 2 modular stepped type modular fan rugulator |
85 | P/F of exhaust fan shutter type of sweep 250mm in the existing opening, including making the hole to suit the above fan, making good the damage as required. |
86 | S/F following size/module, GI box along with modular base and cover plate for modular switches/sockets in recess etc. as required: |
87 | 3 module (100mm x 75mm) |
88 | 4 module (125mm x 75mm) |
89 | 6 module (200mm x 75mm) |
90 | 8 module (1500mm x 150mm) |
91 | S/F following modular switch/socket on the existing modular plate and switch box including connection but excluding modular plate etc. as required. |
92 | 6 amp switch |
93 | 16 amp switch. |
94 | 3 pin, 6 amp socket outlet |
95 | 6 pin, 16 amp socket outlet |
96 | Indicator lamp |
97 | MCB Distribution Board: S/F Double door MCB distribution boards, 240V/415V, Sheet steel, Powder coated DB’s suitable for MCB’s fitted with Bus Bar, Neutral link, Earth Bar and Din bar of following no. of ways : |
98 | 16 Way double door SP&N |
99 | S/F of 5 Amps to 63 Amps, 240/415V, “B series, ISI Mark” miniature circuit breakers suitable for lighting and other loads of following poles in the existing MCB DB complete with connections, testing and commissioning etc as required: |
100 | Single pole 6A, SP MCB |
101 | Single pole 16A, MCB |
102 | Double pole 40A, DP MCB |
103 | Double pole 63A, DP MCB |
104 | 63A DP MCB C/O |
105 | Supplying and laying following size and specification of XLPE insulated PVC sheathed armored cable with aluminum conductor for working voltage 1100 V grade as per IS: 7908, including thimble/lugs, double compression glands etc.of respective size. |
106 | 2CX 16 Sq.mm Un- Armored Al. cable |
107 | Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required. |
108 | 25mm |
109 | Supply anmd fixing of MS fan box |
110 | Supplying and fixing of 10 x 10 x 10 cm of concealed box |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail