Military Engineer Services-MES has published Tender For Comprehensive Maintenance Of Temp Bldgs In Upper And Lower Camp At Khundru Under Ge 861 Ews. Submission Date for this Tender is 22-05-2024. Building Work Tenders in Anantnag Jammu And Kashmir. Bidders can get complete Tender details and download the document.
| FileName | File Description | File Size |
| 9a5e08a5-67df-4baf-a370-e455a1ff3015.html | Tender Notice | 0 KB |
| BOQ_729281.xls | Tender Document | 0 KB |
| Tender06-24-25.pdf | Tender Document | 0 KB |
| Tendernotice_1.pdf | Tender Document | 0 KB |
| Sl. No. | Item Description |
| 1 | Dismantling floor hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to store complete all as specified and directed. |
| 2 | Dismantling of stone slabs and tiles of any description or thickness in floors, aprons etc, laid, bedded and pointed in any mortar, complete all as spcified and directed.. |
| 3 | Demolition of cement concrete (unreinforced) in ground floors & paving n.exc15 cm thick (below or above ground level) complete all as specified and directed. |
| 4 | Taking down chowkhats or frames with shutters (without taking off shutters from the frames) n.exc 1.5 sqm complete all as specified and directed. |
| 5 | Taking down chowkat or frame with shutters (without taking shutter from the frame) exceeding 1.5sqm and not exceeding 4.00 sqm each complete all as specified and directed. |
| 6 | Taking down of shutter any description area exceeding 1 sqm but not exceeding 2 sqm each complete all as specified and directed. |
| 7 | Dismantling wall and ceiling boards (fibre, Pulp, insulation etc) or insulation board/slabs/blankets, any thickness, including cover fillets & snap grid frame etc, complete all as specified and directed. |
| 8 | Dismantling timber scantling framed work 40 sq cm and over in section in any position, complete all as specified and directed. |
| 9 | Dismantlingplain or corrugated steel sheeting , any gauge and thickness,including Nainital or similar pattern roof coverings, complete all as specified and directed. |
| 10 | Taking up or down 15mm bore steel tubing and connection, including cleaning for refixing or removal from site, complete all as specified and directed. |
| 11 | Taking up or down 20mm bore steel tubing and connection, including cleaning for refixing or removal from site, complete all as specified and directed. |
| 12 | Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads, complete all asspecified and directed. |
| 13 | M&L for non-skid coloured ceramic tiles 7 to 8 mm thick (square / rectangular) area of each tile n.exc. 0.11 sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15 mm thick screed bed in CM 1:6, complete all as spcified and directed. |
| 14 | M&L for non-skid coloured ceramic tiles 7 to 8 mm thick (square / rectangular) area of each tile exc. 0.11 sqm but not exc 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15 mm thick screed bed in CM 1:6, complete all as spcified and directed. |
| 15 | M&L for non-skid coloured ceramic tiles 7 to 8 mm thick (square / rectangular) area of each tile exc. 0.11 sqm but not exc 0.18 sqm, as in skirting/dado etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10 mm thick rendering in CM 1:4 to receive tiles complete all as spcified and directed. |
| 16 | M&L for glazed ceramic coloured tiles 450mm x 300mm x 6mm thick as in vertical surfaces such as skirting dado etc set and jointed in neat cement slurry,pointed in white or coloured cement to matchover and including 10mm thick renderingin cement mortar 1:4 to receive tiles, complete all as specified and directed. |
| 17 | M&L for non-skidcoloured ceramic tiles 7 to 8 mm thick (square / rectangular) area of each tile exc. 0.18 sqm but not exc 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15 mm thick screed bed in CM 1:6, complete all as spcified and directed. |
| 18 | M&L for chequered coloured cement concrete tiles of size 300 x 300 x 18-20mm thick, with grey cement and pigment, set, jointed and pointed in neat cement slurry, laid in floors, over and including 15 mm thick screed bed in cement mortar 1:6, complete all as specified and directed. |
| 19 | M&L for machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing, including 15 mm thick screed bed in cement mortar 1:6 complete all as specified and directed. |
| 20 | M&L for machine cut kota stone slab 20-25mm thick in riser of steps, skirting, dado and pillar laid over cement screed and jointed and including 10mm thick renderingin cement mortar 1:4 to receive, complete all as specified and directed. |
| 21 | M&L for 60mm thick factory made machine pressed precast concrete coloured interlocking paver blockwith grey cement and pigment, any shape,size and design as approved by Engr-in charge confirming to IS 15658-2006, M-35 grade, complete all as specified and directed. |
| 22 | M&L for providing 80 mm thick factory made machine pressed precast concrete interlocking coloured tiles with grey cement and pigment of any shape and size confirming to IS 15658-2006, of grade M-40 (compressive strength) of mixed colour complete all as specified . |
| 23 | M&L for 50 mm thick sand filling under floors or in foundation including watering and consolidation, complete all as specified and directed. |
| 24 | M&L for 50mm thick PCC 1:4:8 type D-2 (40mm graded stone aggregate) as in sub-floor, sub-base, floor and pavings, etc., complete all as specified and directed. |
| 25 | M&L for plain cement concrete M-10, 1:3:6, type C-2, using 40mm graded mechanically crushed stone aggregate, 50mmthick, as in plinth protection etc., surface finished even and smooth without using extra cement and laid to a slope of 1 in 24 in alternate panels n.exc. 1.20 Sqm each, 12mm wide and 5 cms deep joints shall be formed between the bays and shall be filled with mastic filling comprising a mixture of one part of heated blown bitumen VG-10 and two parts of heated coarse sand (by volume), all as specified and directed. Note:- The unit rate include for use of form work (straight or curved). |
| 26 | M&L for factory made solid PVC door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, supplying & fixing in opening as per specification & drawing shown in SSR Part-II, complete all as specified and directed. |
| 27 | M&L for factory made solidpanel PVC door shutter 30mm thick (stile) consisting of frame made out of MS tubes for top and bottom rails. MS frame shall be covered with heat moulded plain colour PVCchannel having a PVC sheet strip of 20mm width struck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail and bottom rail on either side and as gap insert for top rails and bottom rail, panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to in stiles & rails with suitable PVC sheet beading and joinned together with solvent cement supplying & fixing in frames at site as per specification and drawing shown in SSR Part -II, complete all as specified and directed. |
| 28 | M&L for 35mm thick, 2nd class softwood factory made, plain framed, panelled shutters (two panels) with lock rail and panel of 9mm BWP commercial ply or 12mm veneered particle board with commercial veneers on both faces. The size of rail and stile as per IS-1003(Part-I), kiln seasoned and chemically pressure treated, fitted to chowkats, complete all as specified and directed. |
| 29 | M&L for 35mm thick, 2nd class softwood factory made glazed and skeleton shutters,open rebated and prepared to receive glass or gauge,etc. (without sash bars) edges offraming plain, chamfered or rounded, fitted with cut &mitred beads for securing gauge sizes of members of shutters as specified in SSR Part-ISection-8,clause 8.24 (a) for door shutter supplying and fitted to chowkats, complete all as specified and directed. |
| 30 | M&L for 2nd class softwood, plain, solid, straight chowkats and frames, wrought, framed, worught, framed rebated on the solid, rounded of chamfered, put together with glue pinned at joints, supplied and fixed complete all as specified and directed. |
| 31 | M&L for 6mm thick plywood, grade BWR, type BB, fixed in ceiling flat and sloping with nails to timber frame, complete all as specified and directed. |
| 32 | M&L for 6mm thick plywood, grade BWR, type BB, fixed in walls with nails to timber frame, complete all as specified and directed. |
| 33 | M&L for 4mm thick veneered decorative plywood, grade 1 (with BWR resin) with decorative face veneers on one face, fixed in ceiling flat and sloping with nails to timber frame, complete all as specified and directed. |
| 34 | M&L for 4mm thick veneered decorative plywood, grade 1 (with BWR resin) with decorative face veneers on one face, fixed in walls with nails to timber frame, complete all as specified and directed. |
| 35 | S&F solid PVC Wall Lining consisting of 5mm thick Plain colour PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC Frame as per specification and drawing complete all as specified and directed. |
| 36 | S&F 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC Frame as per specification and drawing. 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC Frame as per specification and drawing complete all as specified and directed. |
| 37 | M&L for 2nd class softwood, as in scantling and similar work, clean sawn, timber fixed in position, complete all as specified and directed. |
| 38 | All as per the description of item No. 37 here-in- before but except timber. |
| 39 | M&L for 2nd class softwood plain fillets square/rectangular or triangular in section of sectional area exc 13 Sqcm but n exc 25 Sqcm, complete all as specified and directed. |
| 40 | M&L for 2nd class softwood plain fillets bull nosed splayed chamfered or rounded on one edge or face in section of sectional area exc 3 Sqcm but n exc 6 Sqcm complete all as specified and directed. |
| 41 | M&L for 2nd class softwood plain fillets bull nosed splayed chamfered or rounded on one edge or face in section of sectional area n.exc 3 Sqcmcomplete all as specified and directed. |
| 42 | M&L for 0.63mm thick galvanised, corrugated mild steel sheeting with two corrugations side lap with zinc coating of 275, fixed with "L" or "J" type or cranked hook bolts in roofs, walls etc. complete all as specified and directed. |
| 43 | All as per srl item No-42 here in above but except sheets, complete all as per specified and directed. |
| 44 | M&L for 0.80mm thickplain galvanized mild steel sheeting in ridges, hips valley gutters, drip and straight flashings (length and girth as fixed)with grade of zinc coating 275 complete all as specified and directed. |
| 45 | M&L for pre-painted galvalume aluminium zinc coating GIbased corrugated steel sheet 0.50 mm thick of ancolour having tensile strength of 550 Mps as in roof covering /cladding to wall, fixed with self tapping screws as specified and directed. |
| 46 | M&L for pre-painted galvalume aluminium zinc coating GIbased plaind steel sheet 0.50 mm thick of ancolour having tensile strength of 550 Mps as in roof covering /cladding to wall, fixed with self tapping screws as specified and directed. |
| 47 | M&L for steel water tubing, 15mm bore, galvanised, "medium grade" with all fittings and fixtures and short lengths, fixed to wall and ceiling or laid in floor, complete all as specified and directed. |
| 48 | All as per the description of item No. 47 here-in- before but except tubing. |
| 49 | M&L for steel water tubing, 20mm bore, galvanised, "medium grade" with all fittings and fixtures and short lengths, fixed to wall and ceiling or laid in floor, complete all as specified and directed. |
| 50 | M&L for 250mm size mild steel sliding door bolts, plate type, stove enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed, complete all as specified and directed. |
| 51 | M&L for 150mm long mild steelbarrel tower bolts, stove enamelled black, with bright bolts fixed, complete all as specified and directed. |
| 52 | M&L for 100mm long mild steelbarrel tower bolts, stove enamelled black, with bright bolts fixed, complete all as specified and directed. |
| 53 | M&L for 150mm long, mild steel pressed handles, oval type, stove enamelled black, complete all as specified and directed. |
| 54 | M&L for 100mm long, mild steel pressed handles, oval type, stove enamelled black, complete all as specified and directed. |
| 55 | M&L for 100mm long, mild steel cold rolled butt hinges, medium weight, complete all as specified and directed. |
| 56 | M&L for 75mm long, mild steel cold rolled butt hinges, medium weight, complete all as specified and directed. |
| 57 | M&L for 3mm thick sheet glass ordinary quality, and glazing with oil putty or fixed with bead/glazing pins in squares n.exc 0.50 Sqm in each pane, complete all as specified and directed. |
| 58 | M&L for 3mm thick figured glass pin headed typeand glazing with oil putty or fixed with bead/glazing pins in squares n.exc 0.5 Sqm in each pane complete all as specified and directed. |
| 59 | M&L for galvanised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm & fixed with stainless steel wire staples, complete all as specified and directed. |
| 60 | M&L for galvanised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm & fixed with stainless steel wire staples (fixed in repair), complete all as specified and directed. |
| 61 | M&L for rotational moulded polythylene 500 litres capacity water storage tank (Cylindrical vertical with closed top), 3 layer hoisted , white in colour and fixed in position including 20mm brass ball valve high pressure with brass rod & high density plastic ball including dismantlling of existing tank, complete all asspecified and directed.NOTE Write CA NO along with year with using black paint on water storage tank before fixing which will be monitor by executive staff. |
| 62 | M&L for rotational moulded polythylene 1000 litres capacity water storage tank (Cylindrical vertical with closed top), 3 layer hoisted and fixed in position including 20mm brass ball valve high pressure with brass rod & high density plastic ball including dismantlling of existing tank, complete all asspecified and directed. NOTE Write CA NO along with year with using black paint on water storage tank before fixing which will be monitor by executive staff. |
| 63 | S&F in repairs vitreous china squatting pan water closet, orissa pattern, size 580x440mm white with integral foot rests (excluding flushing cistern and flush pipe) but including PVC (SWR) "P" trap 110mm bore jointing to flush pipe complete and making good to floor in cement concrete M-5 (1:5;10), type E-2 using 40mm graded crushed stone aggregate, complete all as specified and directed. |
| 64 | S&F in repairs vitreous china wash down water closet pan (pedestal pattern), white, including "P" or "S" trap, seat cover and fixing bolts, flushing cistern and flush pipe & making good to floor in cement mortar M-15 (1:2:4) type B-1 (using 20mm graded crushed stone aggregated), complete all as specified and as directed. |
| 65 | S&F in repair 10 litre capacity PVC valveless, low level, synphonic action type, flushing cistern, with inlet, ball valve, float valve, handle including brackets,complete all as specified and directed. |
| 66 | S&F in repair PVC connection 15mm size with PTMT nuts of length 450mm,complete all as specified and directed. |
| 67 | S&Fin repair 15mm bore bib tap, fancy type, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or brass ferrule, complete all as specified and directed. |
| 68 | S&F in repairs 15mm bore Stop valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed. |
| 69 | S&F in repair 15 mm borebrass CP mixer for mixing hot and cold waterscrewed down for iron pipe and fixeds, complete all as specified and directed. |
| 70 | S&F in repair 110mm bore dia PVC (SWR) pipes, single socketed, in any length with rubber ring joints fixed to walls, complete all as specified and directed. |
| 71 | S&F in repair 75mm bore dia PVC (SWR) pipes, single socketed, in any length with rubber ring joints fixed to walls, complete all as specified and directed. |
| 72 | S&F 110mm bore dia PVC (SWR) bends, complete all as specified and directed. |
| 73 | S&F 75mm bore dia PVC (SWR) bends, complete all as specified and directed. |
| 74 | M&L for preparation of new wooden surfaces of any description not otherwise described, exc 10 cm width or girth and applying two coats of synthetic enamel paint over one coat of pink primer, complete all as specified and directed. |
| 75 | M&L for preparation of new CGI/PGI steel surfaces of any description not otherwise described, over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer over a coating of mordant solution including washing the surfaces, complete all as specified and directed. |
| 76 | M&L for preparation of old surfaces of walls, plastered or unplastered including brooming down or steel wire brushing scraping down smoke soot, moulds moss and efflorescent salts and trading oil and greasy spots and applying one coat of white wash on wall, complete all as specified and directed. |
| 77 | All as per item No 76 above but applying one coat of white or tinted oil bound distemper on wall, complete all as specified and directed. |
| 78 | All as per item No 76 above but applying one coat of cement based paint on wall, complete all as specified and directed. |
| 79 | M&L for preparation of old painted wooden surfaces of any description not otherwise described, over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed. |
| 80 | M&L for preparation of old painted GI/steel surfaces of any description not otherwise described over 10cm width or girth as in roof and applying one coat of synthetic enamel paint specified and directed. |
| 81 | Taking down cement plaster on brick/stone or cement concrete walls including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed. |
| 82 | M&L for 15mm thick rendering on fair faces of brick work or concrete surfaces in CM 1:4, finished the surface even and smooth without using extra cement complete all as specified and directed. |
| 83 | M&L for preparation of new plastered or unplastered surfaces of wall and applying two coats of cement base paint over a coat of alkali-resistant priming coat, complete all as specified and directed. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
