Military Engineer Services-MES has published Tender For Special Repair Of Bldg No P-89 Of Certain Location At Binnaguri Mil Stn Under Ge(S) Binnaguri. Submission Date for this Tender is 21-05-2024. Building Work Tenders in binnaguri West Bengal. Bidders can get complete Tender details and download the document.
| Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
| 1 | 14-May-2024 | 8649-Date_1 | Date | 21-05-2024 |
| 2 | 16-May-2024 | 8655-Tech_3 | Technical Bid | 21-05-2024 |
| FileName | File Description | File Size |
| b7ded4d2-14e2-47ad-87d5-c7bfe5170dd4.html | Tender Notice | 0 KB |
| 8649.rar | Tender Document | 0 KB |
| BOQ_728670.xls | Tender Document | 0 KB |
| Tendernotice_1.pdf | Tender Document | 0 KB |
| Sl. No. | Item Description |
| 1 | Taking down chowkats or frames exc 1.5 Sqm and n.exc 4 Sqm (without taking off shutter from the frames) and removal from site complete all as specified and as directed. |
| 2 | All as item No 1 here-in before but n.exc 1.5 Sqm eachcomplete all as specified and as directed. |
| 3 | Taking down shutters and refixing in same openingof any description exc 1 Sqm but not exc 2 Sqm each complete all as specified and directed. |
| 4 | Dismantling floor hearth or wall tiling including cement mortar bedding (incl backing) removing serviceable tiles to store and rubbish off the premisescomplete all as specified and as directed. |
| 5 | Taking down cement plaster any description on brick or stone wall etc including racking out joints hacking for key scrubbing down with water etc complete all as specified and as directed. |
| 6 | Dismantling wrought iron or mild steel work of any description not otherwise provided for grils.rails etccomplete all as specified and as directed. |
| 7 | Demolition of brick wallingbuilt in cement mortar etc complete all as specified. |
| 8 | Demolition of cement concrete of any position and descriptioncomplete all as specified and as directed. |
| 9 | Taking town of steel windows/ventilators of any size anddescriptionand removal from sitecomplete all as specified and as directed |
| 10 | Hacking out of old broken glass any thickness size quality or description from metal frame including punching or drilling out old glazing pinscomplete all as specified and as directed. |
| 11 | Taking down tarfelt with cement plaster from roof surfaces and lowering and removing the same toa distance exc. 500m and n. exc.900m incl roughening ofold concrete suirface of roofby wire brushing and cleaning the surface to remove all loose dust etc complete all as specified and as directed. |
| 12 | Demolition of reinforcedcement concrete in any description and in any position (reinforcement cut as required to facilitate demolition)complete all as specified and as directed. |
| 13 | Dismantling old PGI/CGI/Asbestos sheeting any gauge, thickness, including Nainital. Sikkim or similar pattern roof/facia etc complete all as specified and as directed. |
| 14 | M& L vetrified ceramic tiles 10 mm thick (square/rectangular) light shade, area of each tiles not exceeding 0.36 sqm in floor etc set and jointed in neat cement sluury and pointed in white or coloured cement to match complete over 15mm thick screed bed in CM(1:6) all as specified and as directed. |
| 15 | All as per item no 14 but as in skirting 10 cm height. |
| 16 | M&L for glazed colouredceramic tiles (450x350x7mm thick)on vertical surfaces such as skirting/dado set and jointed in neat cement slurry pointed in white or coloured cement to match over 15mm thick rendering in CM(1:4) all as specified and directed . |
| 17 | M&L for joint freenon-skid ceramic tiles any selectedcolour(600x600x7 to 8 mm thick)tiles set and jointed in neat cement slurry pointed in white or coloured cementto match in floor over 15mm thick screed bed in CM(1:6) all as specified and directed. |
| 18 | M&L for providing machine cut polished Kota stone slab 18-20mm thick over cement screed bed and laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including 15mm thick screed bed complete. |
| 19 | All as per item No 18 but in narrow width of vertical surfaces. |
| 20 | M&L for pre-painted galvalume aluminium zinc coating GI based Corrugatedsteel sheet 0.50mm thick of an colour having tensile strength of 550mpa as in roof covering fixed with self tapping screws/J hooks as specified. |
| 21 | M&L for pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of an colour having tensile strength of 550mpa as in roof covering , eaves boards, velly gutter, and other similar works fixed with self tapping screws/J hooks complete all as specified and as directed. |
| 22 | M&L 75mm thick PCC (1:3:6) type C2 as in plinth protection/footpath using 40mm graded stone aggregate finishing cement concrete surface even & smooth without using extra cement including bitumen filling in two panel etc complete all as specified and as directed. |
| 23 | M&L for 25 mm thick PCC (1:2:4) type B1 ( 20mm graded stone aggregate) , finished concrete surfaces even androughto receive floor finishes. |
| 24 | M & L for providing plain cementconcrete type C-1, 1:3:6, (using 20 mm graded stone aggregate), as in copings, bed block for filing hollow space of steel chowkhats, fixing of hold fast, kneelers, apex stones, bed plates, water troughs and the like including weathering, Copping,slightly rounded or chamfered angles & throating as directed including necessary form work as required complete all as specified and directed. |
| 25 | M & LPCC (1:2:4) type B1 (20mm graded aggregate)as in roof kerbs, slightly rounded or chamfered on edges, mixed with water proofing compound 200 ml per beg of cement or as per manufacturer instructions finished even and smooth on exposed concrete surface without using extra cement all complete as specified and as directed.(Note: Water proofing compound shall be measured and paid perarately under relevant item of schedule "A"). |
| 26 | M & L for Plain Cement Concrete Type B1 1:2:4 (using 20 mm graded stone aggregate) in water tank platforms,filling and mass concrete. |
| 27 | M & L for reinforced cement concrete (nominal mix) type B-1 1:2:4 (20 mm graded stone aggregate) for chujjas. |
| 28 | Dismantling water tanks and removing to store of capacity exc 250 & n.exc 500 ltrs. |
| 29 | S & F500 ltrs rotational moulded polyethelene water storage tanks (cyclindrical vertical with closed top) incl connecting up pipes securing access covers etc as specified and as directed. |
| 30 | S&F 20 mm dia PVC ball cock (PVC floatvalves) complete high pressure with epoxy coated aluminum rod and high density plastic ball screwed for iron pipe and fixed as required to use reducer and check nut. |
| 31 | M&L for second class hard wood plain solid straight chowkats and frames wrought framed rebated on the solid rounded on chamfered put together with glue pinned and joints. |
| 32 | S&F for pressed steel frames for doors with one or more rebates including necessary lugs, hinges, lock strike plate, etc., complete, as specified, size of frame 105 x60 mm |
| 33 | S&F for pressed steel frames for doors with one or more rebates including necessary lugs, hinges, lock strike plate, etc., complete, as specified, size of frame 125 x60 mm |
| 34 | M&L for plain, framed, factory made panelled shutters 35 mm thick (any number of panels) , with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers; supplied and fitted to chowkats. |
| 35 | S&F second class hardwood, factory made glazed and skelton shutters 35 mm thick open rebated and prepared to receive glass, gauge etc (without sash bars), edges of framing plain chamfered or rounded, fitted with cut and mitred beads for securing glass etc sizes of members of shutters as specified in SSR Part-I Section8, Clause 8.20 (a) suppliedand fitted to chowkats. |
| 36 | S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing on SI page No 156 of SSR Part-II completed. |
| 37 | S&F Solid PVC door frame of size 50mm X 47mm made out of 5mm plain colour PVC sheet reinforced with MS Square tube, supplying and fixing in opening as per specification and drawing on SI page No.160 of SSR Part-II completed. |
| 38 | S&F of factory made steel windows with side hung shutters openable type including friction/projected typehinges steel handle and peg stay complete withoutglazing bars fixed to existiog opening and making to match as per existing surfaces. |
| 39 | S&F of factory made steel windows with side hung shutters openable type including friction/box type hinges steel handle and peg stay complete with glazing bars fixed to existiog opening and making good to match as per existing surfaces including taking out old/unserviceable steel windows. |
| 40 | S&F in repairs of factory made steel ventilator with top hung shutter including friction/ box typehinges ,steel peg stay complete including taking out old/unserviceable steel ventilator and making good to match as per existing surfaces etc complete all as specified and directed . |
| 41 | S&F Powder coatedaluminium window sliding type three track (2 glazed & one gauze shutter ) aluminium sections weighing not less than 1.67kg/m for frame and 0.55 kg/m for shutter including necessary jointing cleats, glazingcleats, rubber packing , screws, handle, locking arrangement and 5.5mm thick plain/tinted glass and aluminium mosquito proof gauge including taking down of old existing steel window and making good disturbed surface of wall complete all as specified and as directed. |
| 42 | S&F Powder coated aluminium louvered ventilators of size n exc 0.50 Sqm area with glass louvers, without sash bars of aluminium sections weighing not less than 0.605kg/m for frame of size 40x20x2mm including necessary jointing cleats, glazingcleats, rubber packing , anodised aluminium snap beading,screws, anodised aluminium fittings and 5.5mm thick tinted glass fixed in panels with suitable locking arrangementsincluding taking down of old existing steel ventilator and making good disturbed surface of wall complete all as specified and as directed. |
| 43 | S&Fof 3mm thick sheet glass panes ordinary quality n.exc 0.5sqm each fixed to steel frame complete with oil putty in square including steel pin. |
| 44 | All as per item No.43 here-in- above but 4mm thick figured glass pin headed type n.exc 0.5sqm each fixed to steel frame complete |
| 45 | S&F Framed work such as grills,gratings, etcwith ends of bars shouldered and/or riveted,or forged into spikes; framedguard bars; barred iron doors; ladders; framed balusters; walkways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 |
| 46 | M&L brickwork with sub class B bricks straight or curved on plan exc 6mtr mean radius built in cement mortar 1:6 by using old size bricks complete. |
| 47 | M&L for brick work with sub class "B" bricks using old size bricks, straight or curved on plan to any radius, built in CM 1:4 as in half brick thick wall complete all as specified and directed. |
| 48 | M&L for rendering 15mm thick on fair faces of brick or concrete surfaces in cement mortar (1:6) finished even & fair. |
| 49 | M&L for rendering 20mm thick in cement mortar 1:4 in two layers of 10mm each using WPC in finishing layer on brick or concrete surfaces finished even & fair (WPC for finishing layer will be paid seperately as supply only). |
| 50 | Supply only integral water proofing compound. |
| 51 | M&L for 5mm thick in CM 1:3 in ceiling finishing the surfaces even and smooth without using extra cement. |
| 52 | M&L for two coat of Oil boound distember on new wall surface including preperation of the surface all as directed and specified. |
| 53 | M&L for applying 1.0mm thick wall care putty on new or old wall surface all as directed and specified complete. |
| 54 | M&L applying two coats of weather proof exterior emulsion paint of standard quality and make ,over a coat of white primer including preparation of new /old wall surfaces complete all as specified and directed. |
| 55 | M&L for two coats of synthetic enamel painting to new wooden surfaces over a coat of pink primer including preparation of surfaces area exc 10cm width & girth. |
| 56 | Material & labour for preparation of old painted surfaces of wood & wood based materials over 10 cm width or girth and applying one coat of synthetic enamel paint completeall as directed by the Engr-in-Charge. |
| 57 | M&L for applying two coats of synthetic enamel paint over a coat of red oxide primer including preparation of new steel surface over 10cm width or girth |
| 58 | Material and labour for applying one coat of synthetic enamel paint on old painted steel and ironsurfaces of any description over 10 cm in width or girth includingnecessary preparation of surfaces. |
| 59 | Complete removal of existing treatment from plastered or unplastered surfaces of walls including cleaning with scrapers, any number of coats and any width or girth etc and applying two coats of oil bound distemper over a coat of primer oversuper fine Birla or altek putty finish as required and completeall as specified and as directed. |
| 60 | Material and labour for preparation of old plastered ceiling surfaces by brooming down or steel wire brushing: scrapping down smoke soot, mould, moss and efflorescent salts and trading oil and greasy spots and applying one coat of white wash complete all as directed. |
| 61 | M&L for applyingthree coat of white washing including preparation of new or previously untreated surface of ceiling. |
| 62 | M& L for form work to chajjas and similar items including edges ,rough finished surfaces of concrete flat. |
| 63 | M&L for mild steel TMT bars,10mm dia and over cut to length, bent to shape required including cranking ,bending spirally, hooping for columns,hookings/ends and binding with and including MS wire not less than 0.9 mm dia or securing with clips. |
| 64 | M&L for mild steel TMT bars 6mm to 8mm dia cut to length , bent to shape required,including cranking , bending and binding with MS wire , not less than 0.9 mm dia or securing with clip. |
| 65 | M&L for MS flat iron bent to shape, holes drilled etc complete as in hold fast & wind ties etc including one coat of red oxide paint. |
| 66 | M&L for 10mm thick screed bed or bedding layers in cement mortar (1:4) in order to maintain proper slope over existing roof surfaces for applying single componentacrylic polymer modified, finished even and smooth without using extra cement complete all as specified and as directed. (NOTE : Polymeric membrane shall be measured and paid separately under relevant item of this Schedule "A"). |
| 67 | M & L water proofing treatment to RCC roof slab including parapet comprising of the following course of treatement / specified from bottom to top (a) Applying Bituminous primer @ 0.40 Ltr per Sqm over plastered surfaces of roof including parpet surfaces. Bituminious primer shall be "Tar Mastic" manufactured by M/S STP LTD or "EMW FLATE" manufactured by M/S Texsa India Ltd. (b) Over the priming coat laying one layer APP based polymeric membrance of approved manufacturer, 3mm thick of weight not less than 3.60 Kgs/Sqm reinforced with non woven polyester fabric weight not less than 160 gms per Sqm. Polymeric members shall be taken to a height of 60cm (minimum) and then inserted inside the groove of parapet wall and shall be finished by a membrance flashing. (c)Application of two coat of bituminous aluminium paint over the polymeric membrane after necessary preparation and cleaning.Note :- (i) Laying APP based polymeric membrance shall be done by torch on method or as per manufacturers instructions. (ii) A minimum overlap of 100mm shall be made at the end and 75mm shall be made at the sides of the polymeric membrance respectively and sealed all ovelaps and joints as per Manufacturers instructions. (iii) APP based polymeric membrance shall be "SUPER THERMOLAY" manufactured by M/S STP LTD or MOPLYFP manufactured by M/S Texsa India Ltd. |
| 68 | M&L 25 mm thick PCC 1:2:4 type B0 (Using 12.5mm graded stone aggregate) as in floors as levelling course for roof treatment. |
| 69 | S&F of in repair stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.4mm and fixed with tinned tacks,or galvanised wire staples.or wooden beadings for doorscomplete all as specified and directed. |
| 70 | Taking up or downsteel water tubings and fittings etc complete and makinggood disturbed surfaces of walls/ceilings etc complete all as specified and as directedfor bore of tubing15mm |
| 71 | All as per Item No 70 but bore of tubing 20mm |
| 72 | M & L for steel tubing medium grade,galvanised fitting fixed complete to walls and ceiling or floor complete for this following. (a) Bore tubing 15mm |
| 73 | As per Item No 72 Bore tubing 20mm |
| 74 | All as per item No 72 here-in-above but fixing only. |
| 75 | Al as per item No 72 here-in-above but fixing only |
| 76 | S&F in repairs ofPVC low level flushing cistern, 10 ltr capacity, syphonic action type white body with inlet ball valve, float , handle,bracket, longflush pipe of PVC to suit flushing cistern ( long bend) etc complete & connecting to WC |
| 77 | S&FWater Closet (squatt pattern) of vitruous china squatting pan of pattern "ORRISA" pattern size 580 x 440 mm white with integral foot rests (excluding flushing cirstern and flush pipe) including connection to trap and flushing pipe anti syphon pipe etc complete including trap set in and incl concrete complete all as specified and directed. |
| 78 | S&F in repair wash hand basin, vitreous china, white, flat back (550x400mm) cutting for and pinning ends of brackets(Make:Parryware Code No.-0471,Indus Basin (white) or equivalent and waste fitting,brass chromium plated for glazed ware basin etc with long screwed shanks and fly nuts,flange end bedded in red lead cement and other end fixed 32mm including PVC waste pipe with CP /PTMTcoupling of required length. |
| 79 | S&Fof PVC connections 15 mm size with PTMT nuts of length 600 mm. |
| 80 | S&Fin repairs bib taps 15mm bore fancy type chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed. |
| 81 | S&F in repairs for 15 mm bore stop cocks fancy type, chromium plated reduce body, long shank, cap (concealed type) screwed down high pressure screwed both ends for iron pipe or for union etc as in repair. |
| 82 | S&F in repairs angle valve,fancy type chromium plated, brass, 15mm bore complete all as specified and directed. |
| 83 | S&Ffor PVC (SWR) (Bore of pipe 110mm) pipes single socketed, in any length with rubber ring joints fixed to walls with necessary clamps, bolts etc complete all as directed . |
| 84 | S&F for PVC (SWR) bends any radius fixed to PVC Pipes/Steel Gutters etc complete all as directed(Bore of pipe 110mm) |
| 85 | S&F 110mm dia PVC (SWR) branch piece single (single "Y"/T) equal or unequalwith acess door. |
| 86 | S&F 110mm dia PVC SWR vent cowl |
| 87 | M & L for 18 to 20 mm thick granite (of any type) work (table rubbed and polished) in steps, Jambs, pillars, window cills, cooking platforms,corner shelf,Flat shelf and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite and including 15 mm thick cement plaster (1:4)including rounded the exposed surfaces of granite complete all as specified. |
| 88 | All as per item no 87 butas in skirting ( 12 to 15 mm thick) but on 10 mm tkick rendering/ back coating in CM (1:4) complete all as specified and as directed. |
| 89 | M&L in repairs for CINahani trap with grating including jointing to waste pipe fixed in cement concrete (1:2:4) type B1(diameter of outlet75 mm) as in repair complete all as specified and as directed. |
| 90 | M&L for 150 mm size aluminium anodised cast type handles. |
| 91 | Taking down rolling shutter of any descriptionexc 2 sqm but n exc 5 sqm eachand removing to storefrom site. |
| 92 | S & Fof Steel rolling shutters 1.20 mm thick sheet Safety lever locks mild steel with 4 levers for rolling shutters, with out ball bearing with gear operated type with chain wheel and hand chainas specified including top cove withanchoring rod, hasp and staple and one shop coat of primer; erected in position as indicated, complete: complete all as specified and as directed. |
| 93 | S&F of 200mm long aluminium anodised,barrel tower bolt of extruded section. |
| 94 | S&F 300mm, ordinary rat tail rod pattern springs including roller and roller plate complete. |
| 95 | M & L in repair Vitreous China urinals, bowltype (back or corner wall type), complete including providingand fixing plugs, bedding urinalagainst wall in cement mortar1:2, securing urinal to plugs withand including 60mm long brassscrews, pointing around urinalback in cement; fixing automaticflushing cistern with brackets,flush pipe, grating and Union fordischarge pipe. (Inclusive of fixing supply pipe to flushing cistern, trap and waste pipe) |
| 96 | S&F in repairVitreous china wash down water closet pan (pedesatal pattern) (EWC)white including plastic water closet seat cover closed pattern with flat bottom, and cover and mild steel chromium plated hinging divice etc complete |
| 97 | S&F in repair PVC seat cover for pedestal pan, white closed pattern with flat bottom and cover and mild steel chromium plated or aluminiumisedhanging device complete all as directed. |
| 98 | Supply and fixin repair CP Health Faucet of premium quality and make Jaquar or equivalent including two way bib cock and PVC telephonic flexible tube fixed to 15mm bore pipe. |
| 99 | S& F of 140 mm Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor |
| 100 | M&L for mild steel rolled sections conforming to Fe - 410 (Gde E-250) as in main and cross beams, hip and jack rafters;verticals , purlins where connected to common rafter and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates. |
| 101 | M&L 100 mm thick PCC (1:3:6) type C2 as in plinth protection/footpath using 40mm graded stone aggregate finishing cement concrete surface even & smooth without using extra cement including bitumen filling in two panel etc complete all as specified and as directed. |
| 102 | S&F 100mm size mild steel butt hinges medium weight. |
| 103 | Material and labour for PCC (1:3:6) type C-2 using 40mm graded stone aggregate as in surface channels and drains complete all as specified and as directed. |
| 104 | Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc for taking credit ( credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc complete all as specified and as directed. |
| 105 | M&L for point wiring complete with 1.5 Sqmm multistranded copper conductor single core PVC insulated unsheathed FR-LS cable 1100 volts grade (ISI marked) with proper colour coding drawn through and including non-metallic rigid PVC medium grade conduit not less that 20mm dia and conduit accessories (ISI marked) concealed in wall/fixed to roof, ceiling etc including provision of 1.5 Sqmm PVC insulated multistranded unsheathed copper conductor cable FR-LS (ISI marked) as earth continuity conductor connected to common earth dolly, fabricated sundn terminal box made out of GI sheet steel not less than 1.22 mm thick for boxes upto a size of 200 x 300mm and above this size not less than 1.63 mm thick duly painted with aluminum inside and anticorrosive paint outside, concealed in walls, with 3mm thick bakelite/plastic laminated sheet top cover fixed with cadmium plated iron screwsfor housing switches, socket outlets, fan regulators etc duly earthed including cutting chases of existing wall for conduits and sinking for boxes and making good to the disturbed surface of wall/floor and matching with existing specifications.Connections of cable with MCBs or bus bar shall be done through proper size copper/brass thimbles. Where concealing of conduit is not feasible ie on surface of roof etc, conduit shall be fixed on surface with necessary saddles at no extra cost all as specified and as directed for the following :-(a) One light point controlled by one way switch 5/6 amps. |
| 106 | As per Item No 105One ceiling fan/Exhaut fan point controlled by one way switch 5/6 amps complete all as specified and as directed. |
| 107 | As per Item No 105One socket out let 5/6 amps point on the same board complete all as specified and as directed. |
| 108 | As per Item No 105One socket out let 5/6 amps point on the independent board complete all as specified and as directed. |
| 109 | As per Item No 105 One light point controlled by two- 2 way switches complete all as specified |
| 110 | All as per item No 105 above but wiring with 2.5 sq mm single core copper conductor for one socket out let 15/16 amps point on the independent board complete all as specified and directed. |
| 111 | All as per item No 2 above but wiring with 4 sq mm single core copper conductor for one metal enclosure point on the independent board complete all as specified and directed. |
| 112 | S&F switch piano flush type 5/6 amps single pole one way complete all as specified and directed. |
| 113 | S&F socket 2 in 1, 5 Pin, 5/6 amps, white ivory finish flash type complete all as specified and directed. |
| 114 | S&F of socket outlet 2 in 1, 5 Pin, 5/15 amp,multipurpose 230 volt flash type complete all as specified and directed . |
| 115 | S&F switch piano flush type 15/16 amps single pole one way complete all as specified and directed. |
| 116 | S&FCeiling rose, surface type with back plate, three terminal /PVC/ polycarbonate, isolated body complete all as specified and directed. |
| 117 | S & F deluxe fan electronic regulator 230 volts AC 50 Hzs rotary step white/ivory finish complete all as specified and directed. |
| 118 | S&F, IP 20, class I, LED tube light fittings 20W (or nearest next higher wattage) (4feet), wall/ surface mounted, integrated type with aluminium housing and decorative and caps with integrated high efficiency electronic driver and surge suppressor of 2KV or more, luminaire efficiency > 95 lumens/watt, power factor > 0.90, operating range - 140 to 270 V, 50 Hz fixed with 02 Nos of PVC round/ square blocks, screws etc complete with all accessories internally prewired and connecting upcomplete all as specified. |
| 119 | Fixing only fllod light/ high bay light of of any wattage with proper clamping/ welding to existing structure complete all as specified and as directed |
| 120 | S & F LED street light fittings 35 Watt ,230 VAC outdoor type with high pressure die cast aluminium housing, heat resistant, toughned glass cover with IP66 protection complete including GI Pipe lamp bracket all as spedified and as directed. |
| 121 | S&F Sheet metal enclosure for 8 way Distribution Boards (DB’s), double door, single pole & neutral (SPN) with din rail, IP-20 protection suitable for fixing MCB"S/lsolators completeincluding provision of blanking plates as required and taking down the old one complete all as specified and directed. |
| 122 | Complete all as item no 14 above but 4 Way double door Tripple pole & Neutral DB, 415 V complete all as specified and as directed. |
| 123 | Complete all as item no 14 above but 4 Way double door SPN DB complete all as specified and as directed. |
| 124 | Complete all as item no 14 above but 2 Way single door SPN DB complete all as specified and as directed. |
| 125 | Single pole and neutral enclosure with a two pin and earth plug and socket complete with one double pole MCB 20 AMP complete all as specified and directed . |
| 126 | Triple pole and earth encolsure with a three pin and earth plug with socket complete with one triple pole MCB 63 AMP complete all as specified and directed. |
| 127 | S&F MCB, Single pole & neutral 6 to32 amps, 240 volts, ‘C’ curve, 10 KAall completeincluding taking down the old one complete all as specified and directed. |
| 128 | S&F MCB, Single pole, 6 to32 amps, 240 volts, ‘C’ curve, 10 KAall completeincluding taking down the old one complete all as specified and directed. |
| 129 | S&F MCB, TPN 40 to100 amps, 415volts, ‘C’ curve, 10 KAall completeincluding taking down the old one complete all as specified and directed. |
| 130 | M &L for Earthing complete with GI earth plate electrode 600x600x6mm thick buried directly in ground (Earth pit not less than 2.25M deep below normal ground level) with top edge of the plate not less than 1.5m below normal GL. Connected to galvanized earth lead wire 4mm dia by means of nut, bolt, check nut and washersincluding necessary excavation and earth work in soft/loose soil, GI protection pipe light grade 15mm bore for protecting the GI wire mesh funnel alternate layer of charcoal dust, and saltPCC pit 1:3:6 type C1 using 20mm graded stone aggregate and 50mm thick RCC 1:2:4 type BO using 20mm graded stone aggregate cover re-inforced with 8 mm dia MS TMT bars 80mm C/C both ways complete all as specified and shown in Electrical plate No.3 SSR part-1 and connected to the earth point and testing complete including taking out the old one complete all as specified and directed. |
| 131 | M & L Sub main wiringconcealed type with two run single core cable PVC insulated cable with4.0Sqmm (Nominal area) multi stranded copper conductor FRLS cable 1100 volts gde incl earth continuity conductor using PVC insulatedcable of stranded copper conductor of size 4.0 Sqmm connected to common earth dolly anddrawing into rigidPVC conduitsof 25 mm dia medium gradesize,making good the disturbed surfacescomplete including taking down old submain wiring.(NOTE : Two run of submain wiring cable alongwith one run of earth wire shall be measured as one length. . |
| 132 | M & L Sub main wiringconcealed type with four run single core cable PVC insulated cable with4 x 6.0 sq. mm + 2 x 4.0 sq. mm earth wire (Nominal area) multi stranded copper conductor FRLS cable 1100 volts gde incl earth continuity conductor using PVC insulatedcable of stranded copper conductor of size 4.0 Sqmm connected to common earth dolly anddrawing into rigidPVC conduitsof 25 mm dia medium gradesize,making good the disturbed surfacescomplete including taking down old submain wiring.(NOTE : Four run of 6 sqmm wiring cable alongwith two run 4 sqmm wire shall be measured as one length. . |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
