Military Engineer Services-MES has published Tender For Repair Replacement Of Flooring Tiling Roofing Ceiling And Other Misc Br Works At Hq Nc Cp Colony Camp Hrdc A Mess And Ta Gp Ta Coy Ncib And Aor Of Age Br Ii Ge South Udhampur. Submission Date for this Tender is 18-05-2024. Shed Construction Tenders in udhampur Jammu And Kashmir. Bidders can get complete Tender details and download the document.
| FileName | File Description | File Size |
| 62d3e56e-d84d-4f16-a5cb-7bf159e99331.html | Tender Notice | 0 KB |
| BOQ_729107.xls | Tender Document | 0 KB |
| TENDER.pdf | Tender Document | 0 KB |
| Tendernotice_1.pdf | Tender Document | 0 KB |
| Sl. No. | Item Description |
| 1 | Taking down chowkhat or frames with shutters (without taking off shutters from the frames)n.exc 1.5 Sqm each including cutting holes for taking out hold fasts, dismentaling brick work (holes cut and any other damages to jambs, walls for taking out hold fast shall be finished identical to existing finish without any extra cost) complete all as specified and as directed. |
| 2 | Taking down chowkhat or frames with shutters (without taking off shutters from the frames)exc 1.5 Sqm but not exc 4.0 Sqm each including cutting holes for taking out hold fasts, dismentaling brick work (holes cut and any other damages to jambs, walls for taking out hold fast shall be finished identical to existing finish without any extra cost) complete all as specified and as directed. |
| 3 | Taking down shutters of any description exceeding 1 square metre each and n. exc 2 Sqm complete all as specified and as directed. |
| 4 | Demolition of cement concrete, unreinforced, in ground floors and pavings not exceeding 15cm thickness below or above ground level, complete all as specified and as directed. |
| 5 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed. |
| 6 | Dismantling wrought iron or mild steel work of any description not otherwise provided for etc.complete all as specified and as directed. |
| 7 | Factory made, 2nd class hard wood (sal/hollock),plain framed, panelled shutters (two panels) with lock rail and panel of 9 mm BWP commercial ply or 12 mm veneered particle board with commercial veneering on both sides, the side of rail and stile as per IS-1003 (Part-I), kiln seasoned and chemically pressure treated, 35 mm thick completeincluding fixing only iron mongery such as tower bolt, handle, hinges,aldrop bolt etc complete all as specified and as directed. |
| 8 | 2nd class hard wood (sal/hollock), glazed and skelton shutters 35mm thick open rebated and prepared to receive glass, gauge,etc. (without sash bars), edges of framing palin, chamfered or rounded, fitted with cut &mitred beads for securing glass etc. sizes of members of shutters as specified in SSR Pt-I Section 8.24(a) supplied and fitted to chowkhats completeincluding fixing only iron mongery such as tower bolt, handle, hinges, aldrop bolt etc complete all as specified and as directed. |
| 9 | Solid mouled PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. square tube and fixed in opening as per specification and drawingcomplete all as specified and as directed. |
| 10 | Factory made solid PVC moulded door shutter with particle board core, 28 to 30mm thick (stiles), with 2, 4 or 6 raised panel design with 2mm thick moulded PVC sheet on the front face & 2mm thick plain colour PVC sheet on back face, fixing in frame at site as per specification & drawing complete all as specified and as directed. |
| 11 | Anodised aluminium door shutters with frame powder coating of any colour (Thickness or powder coating not less than 50 micron ) , aluminium sectionweighing 0.55 kg/m including with suitable locking arrangement with lock (Make: Godrej) 4 lever, 5.5mm thick tinted glass, 5mm thick aluminium push plate, hydrolic door closer-01 No, pivet with standard floor spring and pivot on top frame, aluminium tower bolts 300 mm long-01 No, glazing clips, rubber packing for locking purpose with aluminium snap beading screws, handles 2 Nos in each door, hinges,etc complete all as specified and as directed. |
| 12 | Powder coated (50 micron of approved colour) Aluminum anodisedshutter window (glazed or wire gauge) fixed type with aliminium window frame or chowkat 1.50 mm thick sheet & section aluminium anodised of size 100 mm x 44.50 mm and window shutter frames made of (middle, top rail, bottom) and styles 1.5 mm thick aluminium anodised sheet & section of size 44.5 x 44.5 mm includingall fittings such as rubber gasket aluminum glazing clips locking cabinet and 75 mm handle and including 4 mm thick tinted glass pane in panes glazed shutter fixed with rubber gasket and glazing clip/aluminium beads and with stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel staples on gauge shutterincluding all accessories complete all as specified and as directed. |
| 13 | Venetian blinds of approved make, vertical/horizontal type using 100mm wide fabric blinds of approved colour/ shade and pattern including operating arrangement such as chord/ thread, counter weight, connecting chain etc., and necessary fittings complete all as specified and as directed. |
| 14 | Aluminum handles cast type, anodised, 150mm size complete all as specified and as directed. |
| 15 | Aluminum anodised barrel tower bolts of extruded section with 150 mm long bolt complete all as specified and as directed. |
| 16 | Mild steel cold rolled butt hinges mediumweight 100 mm long, including fixing to pressed steel/wooden/PVC door framecomplete all as specified and as directed. |
| 17 | Galvanised mild steel wire cloth cut to size, 0.56 mm nominal dia wire and average width of aperture 1.18 mm and fixed with tinned tacks or galvanised wire staple complete all as specified and as directed. |
| 18 | Repair galvanised mild steel wire cloth cut to size, 0.56 mm nominal dia wire and average width of aperture 1.18 mm and fixed with tinned tacks or galvanised wire staple complete all as specified and as directed. |
| 19 | 10 ltr capacity PVC low level flushing cistern symphonic action type white with inlet valve float and handle including brackets,fixed in repairs complete all as specified and as directed. |
| 20 | Steel water tubing medium grade galvanised with all fittings including short lengths, fixed to walls, concealed in wall and ceiling or laid in floor complete with all fittings (such as bends, elbows, Tee, short pieces, connectors, back nuts, diminishing pieces, caps and plugs, unions etc.) of nominal bore 15 mm including taking down steel tubing with connections complete all as specified and as directed. |
| 21 | Steel water tubing medium grade galvanised with all fittings including short lengths, fixed to walls, concealed in wall and ceiling or laid in floor complete with all fittings (such as bends, elbows, Tee, short pieces, connectors, back nuts, diminishing pieces, caps and plugs, unions etc.) of nominal bore 20 mm including taking down steel tubing with connections complete all as specified and as directed. |
| 22 | Repair Vitreous china squatting pan "Orissa" pattern size 580x440 mm white with integral foot rest including connection to trap and flushing pipe complete all as specified and as directed. |
| 23 | Repair ball valves of size 20mm bore dia high pressure of PTMT (Make-Prayag) with epoxy coated aluminium rod and high density plastic ball (Minimum weight not less than 210 gms) screwed for iron pipe and fixedincluding necessary fitting as reqd at site complete all as specified and as directed. |
| 24 | Fixing in repair ball valves of size 25 mm bore dia high pressure of PTMT (Make-Prayag) with epoxy coated aluminium rod and high density plastic ball (Minimum weight not less than 210 gms) screwed for iron pipe and fixedincluding necessary fitting as reqd at site complete all as specified and as directed. |
| 25 | Repair angle valve of brass fancy type,chromimum plated with long shankcast copper alloy screwed down high pressurewith capstan head for iron pipe 15mm bore, complete all as specified and as directed. Jaquar Cat No FON-40053 or its equivalent in Hindware/Cera |
| 26 | Repair PVC connection 15 mm size with PTMT nuts600mm long,complete all as specified and as directed. |
| 27 | Repair Single piece Water closet wall mounted pattern coloured of size : 370x695x795 mm as approved with connected accessories complete all as specified and as directed. Jaquar Cat No KUS-WHT-35851S300UF or its equivalent in Hindware/Cera |
| 28 | Repair WHB coloured 420mm x 420 mm x 155mm with connected accesories as approved and complete all as specified and as directed. Jaquar Cat No CNS-WHT-905 or its equivalent in Hindware/Cera |
| 29 | 15 mm bore centre hole basin mixerwith round spout with 450 mm long copper pipes and brass nuts with out Pop up in repair complete all as specified and as directed.Jaquar, Cat Part No CON 167KNB and equivalent in CERA. |
| 30 | 15 mm bore wallmixer/sink mixer fixed in repair complete all as specified and as directed. |
| 31 | 125 mm dia brass chromium plated shower rose with swivel joints in repair complete all as specified and as directed. |
| 32 | 15 mm bore long body Bib tap in repair complete all as specified and as directed. Jaquar Cat Part No CON-037KN and equivalent in CERA. |
| 33 | Health faucet ABS body with wall hook and 1 mtr chrome plated PVC hose pipe in repair complete all as specified and as directed.CERA Cat Part No F8030103 and equivalent . |
| 34 | Chromium plated toilet paper holder in repair complete all as specified and as directed.Jaquar Cat Part No ACN 1153N and equivalent in CERA. |
| 35 | 600 mm long brass chromium plated towel rail fancy type in repair complete all as specified and as directed. Jaquar Cat Part No ACN-1111NM and equivalent in CERA. |
| 36 | Soap dish in repair complete all as specified and as directed. Jaquar Cat Part No ACN 1131N and equivalent in CERA. |
| 37 | Taking down cement plaster, any description on brick or stone or cement concrete walls including raking out joints, hacking for key, scrubbing down with water complete all as specified and as directed. |
| 38 | 15 mm thick rendering on fair faces of brick or stone/concrete surfacesin cement mortar 1:4 and finished surfaceeven and smooth without using extra cement complete with water proofing compound complete all as specified and as directed. |
| 39 | 15 mm thick rendering on fair faces of brick /concrete surfacesin cement mortar 1:6 and finishedeven and smooth without using extra cement complete all as specified and as directed. |
| 40 | Rendering 5mm thick in cement plaster 1:3 on fair faces of brick work or concrete surfaces as on ceiling complete all as specified and as directed. |
| 41 | Roughening surfaces of old concrete surfaces by picking up, sweeping, cleaning and washing down with water to remove dust etc including taking down tarfelt and brushing neat cement slurry @ 3 kg/Sqm including 15mm thick screeding in CM (1:3) finished even and smooth mixed with water proofing compound (WPC shall be measured and paid separately). Applying bituminous primer on roof surfaces @ 0.40 ltr/Sqm and applying one coat of hot blown bitumen of grade 85/25 @ 1.20 Kg/Sqm and provide modified polymeric APP (Atactic Polypropylene) Modified Polymeric Membrane with 100 micron high molecular high density polyethylene film. Min wt of membrane will be 3.50 Kg/Sqm and bonded completely to the surfaces with min end overlap of 15 cms and side lap 75 mm (overlaps to be bounded with thermo fused by flame) and over APP applying one coat of hot blown bitument 85/25 @ 1.2 Kg/Sqm blinded with fine sand in dry condition @ 0.5 Kg/Sqm, complete all as specified and as directed. |
| 42 | 50 mm thick cement concrete 1:4:8 type D-2 (40mm grade aggregate) as in sub base complete all as specified and as directed. |
| 43 | Providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand complete all as specified and as directed. |
| 44 | Stainless steel (Grade 304) railing made of hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangemen complete all as specified and as directed. |
| 45 | Granite stone 18-20mm thick (table rubbed and polished) inwindow cills, cooking platformsand the like, laid over cement mortar 1:3 after roughening of existing concrete surface and applying a layer of neat cement slurry @ 3Kg/Sqm including pointing in white cement 1:2 using marble dust with admixture of pigments to match with shade of stone, including demolition of stone slabs and tiles of any description or thickness in floors etc. laid, bedded and pointed in any mortar complete all as specified and as directed. |
| 46 | Vitrified tile (Dura stone tiles)of size 300 x 300 x 10mm thick or 400 x 400 x 10mm thick as in floors and over & including 20mm thick screed bed or bedding layer in cement mortar 1:6, including jointed with neat cement slurry and pointed in coloured cement to match the surface of tiles, complete all as specified and as directed. |
| 47 | Machine cut kota stone slab flooring 18-20mm thick over cement screed base 15 mm thick in CM 1:6, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishingcomplete all as specified and as directed. |
| 48 | Light shade double charged glossy finish vitrified tile 10 mm thick (Square / rectangular) polished, area of each tiles not exceeding 0.36 Sqmas in floors set and jointed in neat cement slurry and pointed in coloured cement to match over 15 mm thick screed bed or beddding layer in cementy mortar 1:4complete all as specifed and as directed. |
| 49 | Light shade double charged glossy finish vitrified tile, 600x1200/800x800 or size as approved by Engr in charge of 10 mm thick (Square / rectangular) polished , area of each tilesexceeding 0.42 Sqm but n exc 1.00 Sqm as in floors set and jointed in neat cement slurry and pointed in coloured cement to match over 15 mm thick screed bed or beddding layer in cementy mortar 1:4 complete all as specifed and as directed. |
| 50 | Light shade double charged vitrified tile 10 mm thick (Square / rectangular) polished , as in vertical surface/skirting set and jointed in neat cement slurry and pointed in coloured cement to match over 10 mm thick screed bed or beddding layer in cementy mortar 1:4complete all as specifed and as directed. |
| 51 | Non skidceramic coloured floor tiles 7-8mm thick, area of each tiles exceeding 0.11 Sqm but not exceeding 0.18Sqm or of size as approved as in floors set and jointed in neat cement slurryand pointed in white cement with pigments to match over and including the provision of 15 mm thick bedding layer in cement mortar 1:4 complete all as specified and as directed. |
| 52 | Glazed ceramic coloured tiles 300mm x 600mm x 7mm thickas in vertical surfaces of walls, set and jointed inneat cement slurry and pointed in white or coloured cement to match over 10mm cement rendering in cement mortar 1:4 complete all as specified and as directed. |
| 53 | Wall cladding coloured tiles 300x450x7mm or 300x600x7mm for external surfaces size and design as approved by Engr in Charge as in vertical surfaces of walls, set and jointed inneat cement slurry and pointed in white or coloured cement to match over 10mm cement rendering in cement mortar 1:4 complete all as specified and as directed. |
| 54 | Chequred cement concrete tiles( glosy finish premium quality) 300mm x 300mm x 30-40mm thick, set jointed and pointed in neat cement slurry in floor with grey cement and pigment including 15mm thick screed bed in CM 1:4 complete all as specified and as directed. |
| 55 | Rolled sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates to Fe-290 (Gde E- 165) complete all as specified and as directed. |
| 56 | 0.50mm thick prepainted galvalume aluminium zinc coated GI based semi corrugated/profile steel sheeting of any colour, having tensile strength of 550MPA as in roof covering, wall cladding with self tapping screws or "L" type of "J" type or cranked hook bolts in lieu of screws as per manufacturers instructions including dismantling translucent PVC or Asbestos cement corrugated sheets including ridges as in roof coverings, complete all as specified and as directed. |
| 57 | 0.50mm thick prepainted galvalume aluminium zinc coated GI based plain steel sheeting of any colour, having tensile strength of 550 Mpa as in roof covering, wall cladding with self tapping screws or "L" type or "J" type or cranked hook bolts in lieu of screws as per manufacturers instructions, including dismantling translucent PVC or Asbestos cement corrugated sheets including ridges as in roof coverings, complete all as specified and as directed. |
| 58 | Repairs solid PVC wall lining (wall panelling design and colour shall be approved by Engr in Charge) consisting of 5mm thick wood grainprinted PVC sheet inclusive of solvent cement & PVC framework/beading as required and fixing at site on PVC frame, complete all as specified and as directed. |
| 59 | 4mm thick Cement fibre board (designer ceiling) of size 600mm x 600mm panel conforming to IS 14862 type B category three including GI frame work with size of grid 605mm x 605mm including all accessories and GI suspensions, the fibre sheet should be fire resistant, water resistant, termite resistant, environment friendly & 100% asbestos free, including dismantling existing wall and ceiling boards (fibre pulp, insulation etc) or insulation boards / slabs / blankets, any thickness, including cover fillets, complete all as specified and as directed. |
| 60 | 10-12mm thick perforated gypsum boards seemless as in ceiling as approved, moisture resistant, including intermediate, perimeter channel wall channel, along with nuts and bolts connecting plates for gypsum boards, dry wall screws soffits cleats, ceiling section, rowel plugs fixtures and screwsand applying two coats of emulsion paint over a coat primer on exposed surface, including dismantling wall and ceiling boards (fibre pulp, insulation etc) or insulation boards / slabs / blankets, any thickness, including cover fillets of complete all as specified and as directed.Note: (a) Design of paneling board as approved by Engr-in-Charge/Accepting Officer(b) GI grid, hanhing system shall be of same manufacture. |
| 61 | Brickwork with subclass `B` bricks, in straight or curved on plan exc 6m mean radius, built in CM 1:6 including demolition of brick work complete all as specified and as directed |
| 62 | Preparing newly plasteredsurfaces of walls and applying two coats of oil bound distemper over a coat of primercomplete all as specified and as directed. |
| 63 | Preparation of new wooden surfaces and applyingtwo coat of synthetic enamel paint over a coat of pink primer onwooden surfaces of any description, not otherwise described over 10cm width or girth, complete all as specified and as directed. |
| 64 | Preparation of old wall surfaces with washing, rubbing down and stopping of distempered wall surfaces and applying one coat of OBD, white/ coloured complete all as specified and as directed. |
| 65 | Applying one coats of weather proof exterior emulsion paint (Asian Ultima APEX or Berger Weather Allguard or equivalent) over a coat of exterior weatherproof wall care putty up to G+2 floor height etc including preparation of surface complete all as specified and as directed. |
| 66 | Preparation of old decoarated wall/ceiling surfaces and applying one coat of wall care putty (Make: Birla or equivalent) up to G+2 floor height complete all as specified and as directed. |
| 67 | Mild steel framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted or forged into spikes, framed guard bar; barred iron doors; ladder; framed balusters; railing;frame work for water tanks staging and similar work conforming to Fe 410-0 or Fe 310-0, complete all as specified and as directed. |
| 68 | Three layered heavy duty blow moulded Rotational moulded polyethene water storage tank 500 ltr capacity hoisted and fixed in position having 20mm dia PVC float valve and tank nipple, including dismantling of existing tank, complete all as specified and as directed. |
| 69 | Three layered heavy duty blow moulded Rotational moulded polyethene water storage tank 1000 ltr capacity hoisted and fixed in position having 20mm dia PVC float valve and tank nipple, including dismantling of existing tank, complete all as specified and as directed. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
