Military Engineer Services-MES has published Tender For Provn Of Over Head Shed Both Gates At External Platform Of Bldg No P-34 (Sugar Storage Shed) And Storage Shed Of Coy Asc (Sup) Type G And Provn Of Certain Rev And Minor Works Under Ge Missamari. Submission Date for this Tender is 25-05-2024. Shed Construction Tenders in missamari Assam. Bidders can get complete Tender details and download the document.
| Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
| 1 | 10-May-2024 | BOQ CORRIGENDUM | BOQ | 25-05-2024 |
| FileName | File Description | File Size |
| a9a93d21-4029-4612-8584-05a6135c9418.html | Tender Notice | 0 KB |
| BOQ_729217.xls | Tender Document | 0 KB |
| Tender.rar | Tender Document | 0 KB |
| Tendernotice_1.pdf | Tender Document | 0 KB |
| Sl. No. | Item Description |
| 1 | Surface dressing 15cm deep and getting outin soft/loose soil complete alland directed. |
| 2 | Excavating in trenches n.exc. 1.5 m width and n.exc. 1.5 m in depth for foundation in soft/loose soil & getting out, complete all as directed. |
| 3 | Returning filling in, including spreading, levelling, watering & well ramming in layers not exc 25 cm, complete all as specified and directed. |
| 4 | Removing excavated material (soil) n exc 50 m & depositing where directed at a level n exc 1.5 m, complete all asdirected. |
| 5 | M&L PCC type D2 1:4:8 using 40mm graded aggregate as in foundation, complete all as specified and directed. |
| 6 | M&L forRCC design mix M25 using 20 mm graded aggrgate for Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete, complete all as specified and directed. |
| 7 | M&L forRCC designmixM25 using 20 mm graded aggregate for columns, pillars,posts and struts, complete all as specified and directed. |
| 8 | M & L Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including sup- ports, overhangs, etc. also splays between floors and beams, etc flat, rought finished surfaces of concerete complete all as specified and directed. |
| 9 | M&L for RCC design mix M25 using 20 mm graded aggregate for slab complete all as specified and directed. |
| 10 | M&L for RCC design mix M25 using 20 mm graded aggregate for chajjascomplete all as specified and directed. |
| 11 | M&L for precast RCC design mix M25 ( using 20mm graded aggregate) set in cement mortar 1:4 as in drain cover, manhole cover, etc, complete all as specified and directed. |
| 12 | M & LTMT reinforcement 10 mm dia and over cut to length bent to shape including cranking, banding spirally for hooping columns, hookingend and binding with and includingmild steel wire not less than 0.90 mm dia (annealed) complete all as specified anddirected . |
| 13 | S & F mild steel TMT bar 5 mm dia and over upto and including 10mm dia in strrups as inincluding cutting, bending and binding with and including mild steel not less than 0.9 mm dia (annealed)complete all as specified anddirected . |
| 14 | M&L Form work for Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter, flat, rought finished surfaces of concerete complete all as specified and directed. |
| 15 | M & L Form work for sides of pillars, posts, columns & similar works, square rectangular or polygonal flat, rought finished surfaces of concerete complete all as specified and directed. |
| 16 | M & L Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including sup- ports, overhangs, etc. also splays between floors and beams, etc flat, rought finished surfaces of concerete complete all as specified and directed. |
| 17 | M & L Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) flat, rought finished surfaces of concerete complete all as specified and directed. complete all as specified and directed. |
| 18 | M&L for brick work with burnt old size bricks built in cement mortar 1:6 straight or curved on plan exceeding 6mtr mean radius and all as directed. |
| 19 | M&L for brick work with burnt old size bricks built in cement mortar 1:4 straight or curved on plan to any radius in half thick walls andcomplete all as specified and directed.. |
| 20 | M&L for 40 mm thick Damp proof course to horizontal or vertical surfaces including necessary form work in cement concrete 1:2:4 type B-0 (Using 12.5 mm graded stone aggregate) mixed with WPC as per manufactures instruction with a coat of hot blown bitumen of Grade VG-10 @ 1.5 Kg/Sqm and blended with clean dry sand @ 0.05Cum/Sqm complete all as specified and directed. Note:- WPC shall be measured & paid separately |
| 21 | M&L rendering 15mm thick on other than fair faces of brick or concrete Surfaces in cement mortar 1:6 finished even and fair (without using extra cement), complete all as specified and directed.. |
| 22 | M&L rendering 20mm thick with cement mortar 1:4on fair faces of brick workin two layers (10mm and 10mm) sperately mixed with and including water proofing compund in top layer as per manufacturers instruction and finishing the surfaces even and smooth without using extra cement complete all as specified and directed. |
| 23 | Supply only integral Water Proofing Compund complete all as specified and directed. |
| 24 | M&L for rendering 5 mm thick on ceiling or concrete Surfaces in cement mortar 1:3 finished even and smooth without using extra cement, complete all as specified and directed. |
| 25 | M&L 75mm thick cement concrete (1:3:6) type C-2( using 40mm graded crushed stone aggregate) as in plinth protection laid in alternatebays (not exceeding 2 Sqm each)and finished even and smooth without using extra cement and providing jointsthroughout the thickness of the plinth protection filled with mastic filling comprising one part of bitumen 85/25 grade and three parts of sand by weight complete all as specified and as directed. |
| 26 | M&L Sand filling under floors or in foundations including watering and conosoldiation complete all as specified and directed. |
| 27 | M&L Hardcore of gauge n exc. 63 mm, Broken stone or boulders, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface,complete all as specified and directed. |
| 28 | M&L 100mm thick cement concrete with PCC type D2 1:4:8 using 40mm graded aggregate as in sub base/floor, complete all as specified and directed. |
| 29 | M&L Glazed ceramic coloured tiles in vertical surfaces 600x 300x 7 mm thick set and jointed in neat cement slurry & pointed in white or colour cement to match including backing coat 10 mm thick in Cement Mortar 1:4,complete all as specified and directed. |
| 30 | M&LNon - skidcoloured Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured including 15 mm thick Screed bed or bedding layer of cement mortar 1:6,for laying floor finishes,complete all as specified and directed. |
| 31 | S&F for anodised powder coated aluminium ventitator with frame of weight not less than 0.75 Kg/RM and shutter of weight not less than 0.55 kg/ RM lowers type including nessary fittings and 4 mm thick frosted glass complete all as specified and directed. |
| 32 | S&F framed work such as grills, gratings, etc with ends of bars shouldered and/or revited, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work confirming to Fe.290. Gde-E-165, including necessary prepration of surface and applying a coat of red oxide zinc chrome primercomplete all as specified and directed. |
| 33 | S&F forsolid PVC door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet rainforced with MS square tube in opening as per specification & as directed. |
| 34 | S & F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails, M.S. .frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail,; Paneling of plain colour PVC sheet to be fitted in the M.S.frame welded/ sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, as per specificationdrawing as shown in SSR Part -II section 08 complete all as specified and as directed. |
| 35 | S&F 150mm long aluminium anodised barrel tower bolts of extruded section,omplete all as specified and as directed. |
| 36 | S&F aluminium alloy 250mm anodised sliding door bolts with hasp, staple (bolt type) & fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded section or cast - aluminium alloy and fixed,complete all as specified and as directed. |
| 37 | S&F 100 mm long stainless steel butt hinges with SS screws,complete all as specified and as directed. |
| 38 | S&F aluminium handle cast type anodised 150mm size,complete all as specified and as directed. |
| 39 | M&L three coat ofwhite wash onceiling surface including preparation of new surface complete all as specified and directed. |
| 40 | M&L forpreparation of new plastered surfaces of walls and applying two coat of cement base paint over a coat of primer,complete all as specified and as directed. |
| 41 | M & L for preparation of newly plastered surfaces of wall and apply three coats of white wash, complete all as specified and directed. |
| 42 | M&L providing 25 mm thick cement concrete PCC Type B0 1:2:4 (using 12.5 mm graded aggregate), rendering 10 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:4 mixed with WPC, applying 3mm thick APP based polymeric membrane minimum weighingand reinforced with polyster non woven laid fabric (wt. not less than 150 gms/sqm) on primed surface by forced applicationincluding coating the surface with water based bituminous primer blow bitumen of 85/25at 1.2 Kg/Sqm both at bottom and top of the membrance and finally finished with one coat of bitumenous aluminium paint at 100 gm per sqm complete all as specified and as per manufacturer"s instrcutions. Note : (i) Work shall be carried out by manufacturer or his Authorised applicator of manufacturer. (ii) Water Proof Compound measured seperately |
| 43 | Supply and laying 20 mm dia CPVC pipes SDR 11 & plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified and directed. |
| 44 | Supply and laying 25 mm dia CPVC pipes SDR 11 & plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified and directed.. |
| 45 | S&F 25 mm Gun metal globe or gate valves with iron wheel head screwed both ends for iron pipe and fixed,complete all as specified and directed. |
| 46 | S&F 500 Ltrs. Capacity rotational moulded polyethylene water storage tanks (cylinder vertical with class top) hoisted and fixed in position all as specified including 20mm bore ball brass valves, high pressure, with polythene float and flynut complete screwed for iron pipe or brass ferrule and fixed,complete in all respect as specified. |
| 47 | S & F 15 mm bore chromium plated bib taps, cast copper alloy, with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule,complete all as specified and directed. |
| 48 | S&F 15mm bore stop cock/Stop valves, castcopper alloy,screwed down,high pressure,with crutch or butterfly handle,screwed both ends for ironpipe or for unions and fixed,complete all as specified and directed. |
| 49 | S&F PVC connection15mm size600mm long with brass coupling in both ends screwed down for iron pipe,complete all as specified and directed. |
| 50 | S&F10 Ltrs. Capacity PVC flusing cisternlow level float and handle including brackets, flush pipe, whitewith inlet ball valve with all accessories,complete all as specified and directed. |
| 51 | S&F Towel Rail 600mm long of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats. (Minimum weight 190gms) complete all as specified and as directed. |
| 52 | S&FWash down water closet (Pedestal pattern), includingPlastic water closet seat cover , white, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device complete all as specified. |
| 53 | S&F15 mm bore Fancy type pillar taps, Cast Copper alloy, with capstan heads, chromium plated, screwed down high pressure with or without lettered Hot or Cold with long screwed shanks and fly nuts, screwed for iron pipe and fixed,complete all as specified and directed. |
| 54 | S & F in repairs Vitreous China Ware Wash hand basin white, flat back, size 550 x 400 mm sizeincluding cutting for and pinning ends of brackets or erecting stand, with and including 32mm bore Waste coupling of PTMT (half or full threaded) (Minimum weight 32mm-45gms), 32mm bore PVC solid waste pipe 800mm long complete all as specified and directed. |
| 55 | S&F 125mm size Chromium plated shower rose with or without swivel joints, any size, including fixing tosteel pipe or union,complete all as specified and directed. |
| 56 | S&F 600mm x 450 mm bevelled edge mirror of selected quality glass, mounted on 6 mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers,complete all as specified and directed. |
| 57 | S&F grating doom 100mm dia of PTMT (minimum weight 25gms)complete all as specified and directed. |
| 58 | S&F 75mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors,complete all as specified and directed. |
| 59 | M&L 100 mm bore for cast iron Nahani trap with grating incl jointing to waste pipe fixed in cement concrete type B-1 (1:2:4),complete all as specified and directed. |
| 60 | S&F 100mm bore PVC (SWR) Soil, waste and vent pipes single socketed in any length with rubber ring joints fixed to walls,complete all as specified and directed. |
| 61 | S&F 100 mm bore PVC (SWR) bends of any radius,complete all as specified and directed. |
| 62 | S & F 110 mm bore PVC (SWR) Vent Cowl,complete all as specified and directed. |
| 63 | Supplying, laying and testing of 150 mm internal dia of double wall corrugaed (DWC) high density polythylene pipe (HDPE) and stiffness classes 8 (SN-8) with ISI marked (With CML No ) with and including all fittings & jointing materials for connection of inspection chamber/WC to first manhole of the sewage line complete all as specified and directed.. |
| 64 | Cutting into existing manhole for connecting new drain of 150 mm bore pipe making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 rounds of ¾ section) in cement concrete 1:2:4 type B1 smooth finished reforming benching as required, complete all as directed |
| 65 | S&F in repairs health faucent (ABS Body) mild steel chromium plated suitable for 15mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connection and fixed in position complete in all respect as specified. |
| 66 | M&L for Roughening surfaces of old concrete by picking, sweeping clean and washing down with water to remove dust, etc.complete all as specified and directed. |
| 67 | M&L Machine cut kota stone slab flooring 18-20mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing incl Screed bed or beddinglayer of mortar 20 mm thick in cement mortar 1:6 for laying floor finishes complete all as specified and directed. |
| 68 | M&L Kota stone slab 20-25mm thick in riser of steps, skirting, dado and pillar laid over cement screed and jointed with including Screed bed or bedding layer of mortar 15 mm thick in cement mortar 1:4 for laying floor finishes complete all as specified and directed. |
| 69 | M&L cement concrete with PCC type D2 1:4:8 using 40mm graded aggregate as in foundation, complete all as specified and directed. |
| 70 | M&L for 100mm thick cement concrete typec C-2 (1:3:6) using 40 mm graded stone aggregate as in path/hardstanding/sub base, complete all as specified and directed. |
| 71 | M&L Machine pressed precastconcrete interlocking paverblock any shape and sizeconfirming to IS 15658-2006of 80 mmthickness M-40 Grade complete all as specified and directed.. |
| 72 | S&F pre painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall fixed with self tapping screws complete all as specified and directed. |
| 73 | S&F pre painted galvalume aluminium zinc coating GI based plain steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall fixed with self tapping screws complete all as specified and directed. |
| 74 | Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161- 1979 grade St.-240,including prepration of surface and applying a coat of red oxide zinc chrome primer complete all as specified and as directed. |
| 75 | S&FRolled sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates confrming to Fe-290 (Gde E- 165) including necessary prepration of surface and applying a coat of red oxide zinc chrome primer complete all as specified and directed. |
| 76 | Preparation of newsurfaces of any description, over 10 cm width or girth, not otherwise described appling applying two coat of synthetic enamel paint, complete all as specified and directed. |
| 77 | M&L plain cement concrete with type C2 1:3:6 using 40mm graded aggregate as in foundation, complete all as specified and directed. |
| 78 | M&L plain cement concrete with in surface chanels and draintype C2 1:3:6 using 40mm graded aggregate complete all as specified and directed. |
| 79 | M&L for 15mm thick plaster on fair faces of brick work or concrete surface in cm (1:6) to wall surface and the surface is finished even and smooth without using extra cement ,complete all as specified and directed. |
| 80 | M&L for brick work with Sub -Class "B" bricks in bricks on edge walls (less than 1/2 brick thick)built in cement mortar 1:4complete all as specified and directed. |
| 81 | Excavation in post holes or simillar hole eachn exc. 0.5 cum, getting out, in soft/loose soil and all as directed. |
| 82 | M&L Cement Concrete 1:2:4(40mm graded aggregate) in Foundations, Filling and Mass Concrete including use and waste Formwork as ordered/required at Site, complete all as specified and as directed. |
| 83 | M&L 25mm thick plain Cement Concrete type B1, 1:2:4(20mm graded aggregate),as in floor finished even and fair without using extra cement complete all as specified and as directed. |
| 84 | Material & Labour for preparation of new wall surface applying Two or more coats of 100% Premium acrylic exterior emulsion paint with silicone additives of required shade additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @2.20 litre/ 10 sqm over new surface over 1 mm thick wall care putty,complete all as specified and as directed. |
| 85 | M & Lfor preparation of new wall surface applying Two or more coats of 100% Premium acrylic exterior emulsion paint with silicone additives of required shade additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @2.20 litre/ 10 sqm complete all as specified and directed. |
| 86 | M&L for concealed point wiring with two single core 1.5 Sq.mm size FRLSH multistranded copper conductor PVC insulated cables and one single core 1.5 Sq.mm size green FRLSH colour PVC insulated,multistranded copper conductor PVC cable as earth continuity conductor,1100 volts grade, complete drawn in and including 20mm(minimim) medium grade rigid PVC CONDUIT and conduit accessories i.e. joint boxes, terminal boxes for mounting or housing switches, socket outlets, fan regulators, etc. confirmingto IS specifications, including Mild Steel Pressed Terminal Box 1.22mm thick of suitable size duly painted with red oxide metal primer with 3.0mm thick Plastic Laminated Sheet Top Cover for mounting Switches, Sockets, etc. with including cutting chases for conduits & sinkings for MS Sunken boxes & making good to walls, floors etc for One light point controlled by one, one way switch 5/6 Amps. complete all as specified & as directed. |
| 87 | S & F Switch piano (White)flush type single pole one way 5 Amp, 230 Volts complete all as specified. |
| 88 | S&F ceilling rose (White)three terminal surface bakelite type AC 50 Hz 230 Volt of size 65x50mm complete all as specified and as directed. |
| 89 | S&F sheet metal enclosure MCB DBSPN 2 way with 200 amps rated bus bar 230 volts double doorfixed in wall complete all as specified and directed. |
| 90 | S&F MCB Double Pole 10 Amps 240Volt, confirms to IS/IEC 60898 Breaking Capacity of 10 kA, B-curve, complete all as specified and directed. |
| 91 | S&F LED lights fitting 1x 20W, 220V, AC decorativeultra slim round profile LED lighting fixture with extruded polycarbonate , environmental friendlyenergy efficiebt ready to use packwith driver, holder including LED tube lightconnecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed. |
| 92 | S&F Energy saving new generation environmental friendly long life versatile presure die cast aluminium IP 66 security light fitting luminaire with high power LEDs as light source and PC Cover having TOP opening seperate driver compartment with IP 66 Protection and impact resistance of IK07 with electronic driver of capacity 20 watts with pre wired andnecessary mounting arrangements, provision of new 3 core multistrandedcopper conductor of size 23/0.193 to fitting with 32mm bore GI pipe, Light grade, bracket of 1.5 mtr long bend to required shape, and fixing with MS clamps, nuts bolts including applying a coat of red oxide zinc chrome primer on clamps and applying two coats of syntheic enamel paint complete all as specified and as directed |
| 93 | M & L sand cushioning in trenches for cable protection with coarse sand laid dry in trenches with uniform thickness including consolidation complete all as directed. |
| 94 | Supply & Laying well burnt brick , locally available best quality (sub class "B" bricks ) laid in trences perpendicular to UG Cable protection complete all as specified. |
| 95 | Supply & Laying XLPE LT heavy duty UG Cable of size 6 Sqmm 2 Core laid in trences /floor/on wall/service connection PVC Insulated, sheathing and armoured 1100 Volts grade with aluminium conductor including connection to the main switch/cut out MCB/MCCB with necessary lugs after cutting to required length complete all as specified and directed. |
| 96 | S&F GI Tubing light grade of size 32mm bore as in protection of cable at road crossing /hard standing/pole protection fixed with clampnuts, bolts as requried including applying a coat of red oxide zinc chrome primer and finishing the surfaceswith two coat of synthetic enamel painton clampas per site requirement etc all as specified and directed. |
| 97 | M&L earthing with GI earth plate electrode 600x600x6mm thick buried directly in ground vertically to depth not less than 2.25m below the ground level with top edge of earth plate at a depth not less than 1.5m below the ground level connected to galvanized iron wire 4mm dia earth lead by means ofbolts & nuts,check nuts & washers made of galvanised steel, earth wire protected by and including PCC (1:2:4) type B1 precast RCC cover slab(1:2:4) reinforced with 8mm dia TMT bars 100mm center to center bothways including one handle made of 10 mm dia round bar, including necessary excavation and earthwork in any type of soil, 20 mm dia medium grade galvanized steel tube for watering with one end fixed with cast iron funnel and wire mesh, 15 mm bore medium grade galvanized steel tubing for drawing earth wire GI strip protection & common salt, charcoal in alternate layers etc. complete all as shown in EP No 3 of SSR Part 1 and testing on completion complete all as specified and as directed. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
