Bharat Sanchar Nigam Limited-BSNL has published 05Nitbsnlcdhbl202425 Providing Additional Roof Top Pole Structure For Mounting New 4G Equipment At Eight Existing Tower Sites In Hubballi Ba. Submission Date for this Tender is 09-05-2024. Shed Construction Tenders in hubbali Karnataka. Bidders can get complete Tender details and download the document.
Sl. No. | Item Description |
1 | Demolishing R.C.C. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 metres lead as per direction of Engineer - in- charge. |
2 | Rebaring 12 mm TMT bar with following operation. 1.Drilling hole upto 13.5mm in dia.upto depth of 100mm in slab/150-200mm in columns and beams 2.Cleaningof hole by removing dust / concrete particles by suction.3.Injecting in hole Chemical Fischer FIS V 360 or equivalent chemical and inserting 25mm dia bar. |
3 | a)upto 100mm depth in slab |
4 | Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. |
5 | Galvanised Steel work in built up tubular ( round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. |
6 | Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement : |
7 | (a) 1:1.5:3 (1 cement : 1.5 coarse sand (Zone III) derived from natural sources: 3 graded stone aggregate 20 mm nominal size derived from natural sources) |
8 | Centering and shuttering including strutting, propping etc. and removal of form for : |
9 | (a) Lintels, beams, plinth beams, girders, bressumers and cantilevers. |
10 | (b) Columns, Pillars, Piers, Abutments, Posts and Struts. |
11 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level. |
12 | (a) Thermo-Mechanically Treated bars. |
13 | Errection of 6.00 Metre / 9.00 Metre highpre- fabricated pole structure for tower as per Departmental drawing with all its necessary components , nutsand spring washerincluding the fixtures like lightening arrester, avialtion lamp,antiena mount etccomplete in all respect as per direction of the E-in-C. ( Note: The rate shall include the cost of all operations invloved in hoisting and erection of pole tower , hire charges of tools, plants & machineries, labour charges,insurance premium of labour etc. and nothingextra shall be paid on any account. The agency shall produce insurance coverage certificate for workers, failing which the same shall be deducted from their bill ). |
14 | a) Pole structure 6.0 M high |
15 | Smooth finishing of the exposed surface of R.C.C. work with 6 mm thick cement mortar 1:3 (1 Cement : 3 fine sand) |
16 | Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade |
17 | a) Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture. |
18 | Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq.meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground within 50 metres lead : |
19 | a) With cement mortar 1:4 (1 cement : 4 Coarse sand). |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail