Military Engineer Services-MES has published Tender For Welcome Maintenance Of Offers Md Accommodation Under Age Br-Ii At Amritsar Cantt. Submission Date for this Tender is 20-05-2024. Building Work Tenders in amritsar Punjab. Bidders can get complete Tender details and download the document.
| FileName | File Description | File Size |
| 7a8aa477-e814-4fda-9572-e7068a1f3f9a.html | Tender Notice | 0 KB |
| BOQ_729219.xls | Tender Document | 0 KB |
| TENDER11.pdf | Tender Document | 0 KB |
| Tendernotice_1.pdf | Tender Document | 0 KB |
| Sl. No. | Item Description |
| 1 | Taking down shutter and removing from site of any description size but exc 1 sqm and n.exc 2 sqm ; Complete all as specified and directed by Engineer-in-Charge. |
| 2 | Taking down chowkhats or frame without taking of shutter and removing from siteexc 1.5sqmbut not exceeding 4 sqm each; Complete all as specified and directed by Engineer-in-Charge. |
| 3 | Taking down chowkhats or frame (w/o taking off shutters) and removing from site n.exc 1.5sqm each; Complete all as specified and directed by Engineer-in-Charge. |
| 4 | Taking down shutters of any descriptionexc 1.00 sqm & not exc 2sqm each. and refixing in the same opening ; Complete all as specified and directed by Engineer-in-Charge. |
| 5 | Material and labour PCC 1:2:4 type B-0 using 12.5mm graded crushed stone aggregate as in hold fast block, roof kerbs or mud stop, coping,rounded or chamfered on edges andlike including weathering, slightly rounded or chamfered angles and throating etc incuding necessary form work ; Complete all as specified and directed by Engineer-in-Charge. |
| 6 | Material and Labour for brick work with sub Class "B" old size bricks, straight or curved on plan exceeding 6 Metre mean radius, built in cement mortar 1:6including demolition of brickwork; Complete all as specified and directed by Engineer-in-Charge. |
| 7 | Material and labour for 15mm thick cement plaster in CM (1:6) onfair faces of brick or concrete surfaces and finishing the surface even and smooth (without using extra cement) etc.Including taking down cement plaster. ; Complete all as specified and directed by Engineer-in-Charge. |
| 8 | Material and Labour for preparation of new plastered surfaces and applying two coatsof oil bound distemperon walls; Complete all as specified and directed by Engineer-in-Charge. |
| 9 | Supply and Fixing solid PVC door frame of size 50 x 47 mm made out of 5mm plain colour PVC sheet reinforced with MS square tube including taking down old frame any type; Complete all as specified and directed by Engineer-in-Charge. |
| 10 | Supply and Fixing Factory made solid panel PVC door shutter 30 mm thick (style)consisting of frame made out of MS tubes for top & bottom rails MS frame shall be convered with heat moulded plain colour PVC `C"channel having a PVCsheet strip of 20 mm width stuck inside with solvant cement for stiles and plain colour PVC sheet top rail, lock rail and bottom rail on either side and as gap insert of top rail and bottom rail; paneling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles and raials with suitabale PVC sheet beading, and jointed together with solvant cement, fixing in the frame at side as per specification and drawing ; Complete all as specified and directed by Engineer-in-Charge. |
| 11 | Materialand Labourfor Boxtypesteelwindowmade ofERW tube P- sectionof size 60 mmx25mmsingle rebated,comprises glazedskeltonshutterof ERW tube P-Section size 50mm x 20mmwith one/two Nos openable leaf consisting of two Nos Sashbar of T-section 20 x 3 mmwelded to frame with one No verticle mullion of ERW box type T Section of size 60mm x 25mm and FI 2mm thick welded/screwed to frame for fixing of glass including fittings and fixture like as Handle, Tower Bolt, Stopper, Cleat, Pintal hinges, holdfast etc as given belowall as shown on drg No CEJZ/TD-1019/08 & Sh 1/3 to 3/3 dt 01 May 2008 complete including cutting holes, making good dismentled portion in PCC 1:2:4 type B-1,; Complete all as specified and directed by Engineer-in-Charge.. (a) Hold fast 150mm long of 12mm x 3mm MS flat- 4 Nos per Window. (b) Handle of Z section 20mm x 25mm, 100mm long- 01 No per leaf. (c) MS tower bolt 150mm long - 02 Nos/leaf. (d) Z Section stopper 20mm x 25mm, 100mm long - 01 No per leaf. (e) Cleat 55mm long of hollow square 15mmx12mm - 02 Nos per leaf. (f)MS pintol hinges size 75mmx12mm - 2 Nos per leaf Note :- MS guard bars, sheet glass wire mesh and painting shallbe measured and paid sperately |
| 12 | Supply and Fixing in repairs mild steel box type ventilator fixed type with glazing bar with mesh & glass as per drg No. CEJZ/TD-06/07 dt 07.06.07 primer coated; Complete all as specified and directed by Engineer-in-Charge. |
| 13 | Supply and fixing 30mm thick flush shutter, soild core construction with block board core and plywood face panels commercial type on both side ; Complete all as specified and directed by Engineer-in-Charge. |
| 14 | Supply and Fixing 35mm thick 2nd class hard wood glazed and skeleton shutter’s open rebated prepare to receive glass gauge etc edges of framing plain chamfered or rounded fitted with Cut and mitered bead’s for securing glass gauge etc size of mamber of shutters as per SSR Part-I Section-8 clause 8.2 (a); Complete all as specified and directed by Engineer-in-Charge. |
| 15 | Hacking out old broken glass any thickness, size, quality or description from steel frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads; Complete all as specified and directed by Engineer-in-Charge. |
| 16 | Supply and fixing 3mm thick ordinary sheet glass and glazing with oil putty or fixed on steel frame, in squares not exc 0.50 Sqm in each panes; Complete all as specified and directed by Engineer-in-Charge. |
| 17 | Supply and fixing stainless steel wire cloth 0.56mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks or stainless steel wire staples; Complete all as specified and directed by Engineer-in-Charge. |
| 18 | All as per Srl item No 17here-in-before but fixed in repairs |
| 19 | Supply and fixing 300 mm size, aluminiumalloy,anodized sliding door bolt, clip type,and fixing clips of sheets or extruded section and fixing of bolts and sliding bolts of extruded section fixed with stainless steel screw ; Complete all as specified and directed by Engineer-in-Charge. |
| 20 | Supply and fixing butt hinges 100mm size medium weight cold rolled mild steel fixed with stainless steel screw; Complete all as specified and directed by Engineer-in-Charge. |
| 21 | Supply and fixing in repairs 150mm size aluminium anodized barrel tower boltof extruded section fixed with stainless steel screw; Complete all as specified and directed by Engineer-in-Charge. |
| 22 | Supply and fixing 200mm size extruded aluminium anodized tower boltof extruded section; Complete all as specified and directed by Engineer-in-Charge. |
| 23 | Supply and fixing in repairs 300mm mild steel ordinary rat tail rod pattern spring including roller plateincluding fixing with nailsd/ bolts or welded; Complete all as specified and directed by Engineer-in-Charge. |
| 24 | Supply and fixingin repairs150mm size extruded aluminium anodized handle cast type fixed with stainless steel screw; Complete all as specified and directed by Engineer-in-Charge. |
| 25 | Supply and Fixing in reapair 25mm dia stainless steel Curtain rods/ rails,with brackets, stops, rollers, finials, 1 pair of decorative knobs for each curtain rod etc. ; Complete all as specified and directed by Engineer-in-Charge. |
| 26 | Material & Labour for Preparation of new wooden surface over 10 cm width or girth and applying two coat of synthetic enamel paint over a coat of pink primer; Complete all as specified and directed by Engineer-in-Charge. |
| 27 | Material and labour for applyingtwo coat of synthetic enamel paint over a coat of red oxide, zinc chrome primer on steel surfaces exceeding 10 cm width or girthincludingpreparation ofnew surfaces; Complete all as specified and directed by Engineer-in-Charge. |
| 28 | Supply and Fixing floor door stopper 125mm length Coated brown aluminium alloy body fixed; Complete all as specified and directed by Engineer-in-Charge. |
| 29 | Supply and fixing 40mm long box type stainless steel hinges spring action , ; Complete all as specified and directed by Engineer-in-Charge. |
| 30 | Supply and fixing stainless steel rolling drawer pull type suitable for kitchen cabinets with all fixing arrangement area of each drawer n exc 0.30sqm of vertical face having depth 450mm to 600mm; Complete all as specified and directed by Engineer-in-Charge. Note:- Net area of front finished surface will be measured. |
| 31 | Supply and Fixing mild steel continuous piano hinges with 30mm width of flap bright finished; Complete all as specified and directed by Engineer-in-Charge. |
| 32 | Supply and fixing galvanized iron steel tubing medium grade 15mm bore with all fittings and fixedto walls, ceiling or laid in floor includingtaking up or down steel water tubing and connectionsincluding removal of unserviceable pipe, bore of pipe 15mm ; Complete all as specified and directed by Engineer-in-Charge. Note :- The quoted rates shall be include for necessary excavation andearth work, cutting/ chasing in wall/ floor and making good in CM1:3 all as directed. |
| 33 | Supply and fixing galvanized iron steel tubing medium grade 20mm bore with all fittings and fixedto walls, ceiling or laid in floorincludingtaking up or down steel water tubing and connectionsremoval of unserviceable pipe, bore of pipe 20mm ; Complete all as specified and directed by Engineer-in-Charge. Note :- The quoted rates shall be include for necessary excavation andearth work, cutting/ chasing in wall/ floor and making good in CM1:3 all as directed. |
| 34 | Supply and Fixing in repairs 125mm CP shower rose fancy type with CP arm; Complete all as specified and directed by Engineer-in-Charge. |
| 35 | Supply and fixingin repairs PVC connection 450mm long of 15mm size with PTMT nutson both sides; Complete all as specified and directed by Engineer-in-Charge. |
| 36 | Supply and Fixing in repairs bib taps cast copper alloy chromium plated fancy type 15mm bore withcrutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed; Complete all as specified and directed by Engineer-in-Charge. |
| 37 | Supply and Fixing in repairs Angle valves, cast copper alloy, chromium plated, fancy type with long shank and cup, screwed down high pressure, screwed both ends for 15mm bore dia iron pipe or for union, ISI marked,complete all as specified and as directed by Engineer-in-Charge. |
| 38 | Supply and fixingin repairsplastic water closet seat coloured closed pattern with flat bottom cover and mild steel chromium plated or aluminized hinging device; Complete all as specified and directed by Engineer-in-Charge. |
| 39 | Supply and Fixing in repairs for 15mm bore stop valves, cast copper alloy, concealed type, chromium plated with long shank and cup ,screwed down,handles, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed by Engr-in-Charge. |
| 40 | Supply and fixingvitreous china squatting pan ( Orissa Pattern) size 580 x 440 mm (white), with PVCP or S trap, integral foot rest including water connection to trap and flushing pipe, flushing cistern etc complete andbedding in PCC 1:7:12 type F-2includingtaking down/dismantling old unserviceableWC; Complete all as specified and directed by Engineer-in-Charge. Note :-Flush pipe and flushing cistern to be measured and paid separately. |
| 41 | Supply & fixing vitreous china wash down water closet pan (padestal pattern) white with flush pipe for low level flushing cistern including plastic water closet seat white withjet, closed pattern with flat bottom and cover and mild steel chromium plated or aluminized hinging device fixed in repairs; Complete all as specified and directed by Engineer-in-Charge. |
| 42 | Supply and fixing in repairs PVC Mirror bathroom cabinet with shelves fancy type of size 350x450mm includingfixing arrangement; Complete all as specified and directed by Engineer-in-Charge. |
| 43 | Supply and fixing whitePVC valveless syphonic action type low level flushing cistern of 10 ltrs capacity with inlet ball valve, float valve, push button type handle includingpipe 32mm dia of PVC(Heavy duty) flush pipeincluding brackets andtaking down/dismantling old unserviceable cistern; Complete all as specified and directed by Engineer-in-Charge. |
| 44 | Supply and fixing in repairs viterous chinaware wash hand basin light colour/white of size 550x 400cm flat back or angle stay, brass chromium plated waste coupling, chain, plug, porcelain rubber stopper, brackets,32mm bore PVC waste pipe of appropriate length ilcluding taking out of old WHB & making necessary connections; Complete all as specified and directed by Engineer-in-Charge. |
| 45 | Supply and Fixing rotational moulded polythene, triple layers, water storage tank 500 Litre capacity, closed top, cylindrical, hoisted and fixed in position including 20mm bore PTMT ball valve epoxy coated minium weight 210gms with aluminium rod includingdismantling water tanks Exc 250 Ltr and not exceeding 500 Ltr; Complete all as specified and directed by Engineer-in-Charge. |
| 46 | Supply and Fixing rotational moulded polythene, triple layers, water storage tank1000 Ltr capacity, closed top, cylindrical, hoisted and fixed in position including, 20mm bore PTMT ball valve epoxy coated minium weight 210gms with aluminium rod dismantling water tanks Exc 500 Ltr & not exceeding 1000 Ltr ; Complete all as specified and directed by Engineer-in-Charge. |
| 47 | Supply and Fixing repairs 20 mm bore dia gate valve,gun metal with iron wheel head,screwed both ends and fixed; Complete all as specified and directed by Engineer-in-Charge. |
| 48 | Supply and fixing in repairs stainless steel kitchenplate rack size 90cm X 90cm ,25cm deep made of 1mmstainlessweight not less than 7.5 kg sheet fixed to wall; Complete all as specified and directed by Engineer-in-Charge. |
| 49 | Supply and fixing sink with drainage board made of stain less steel 1mm thick with plugs, washers and wastes pipe including bedding in cement mortar to dwarf wall or including fixing cantilever brackets of angle iron 50x50x6mm including two coats of synthetic enamel paint over coat of primer and connecting union to pipe over all minimum size 915mm x460mm bowel size 410mm x 330mm x160mm; Complete all as specified and directed by Engineer-in-Charge. |
| 50 | Supply and Fixing in repairs CP brass towel rail of 20mm dia and 600mm long; Complete all as specified and directed by Engineer-in-Charge. |
| 51 | Dismantaling floor hearth or wall tiling including cement mortar bedding (but not backing ) removing serviceable tiles to store and rubbish off the premises; Complete all as specified and directed by Engineer-in-Charge. |
| 52 | Supply and Fixing glazed ceramic coloured tiles 450x300mmx6mm thick, etc. on vertical surfaces such as skirting , dados and risers to steps etc. set and jointed in neat cement slurry and pointed in white cement mixed with pigment to match over and including 10mm thick rendering plaster in CM 1:4 on brick surface; Complete all as specified and directed by Engineer-in-Charge. |
| 53 | Supply and Fixing Coloured/printed non skid ceramic tiles 7 to 8 mm thick (Square/rectangular) area of each tile exceeding 0. 11 sqm but notexceeding 0.18 sqm, in floors etc, set and jointed in neat cement slurry and pointed in white or Coloured cement to match over 15 mm thick screed bed or bedding layers in CM 1:6.; Complete all as specified and directed by Engineer-in-Charge. |
| 54 | Supply and Fixing Coloured/printed non skid ceramic tiles 7 to 8 mm thick (Square/rectangular) area of each tile exceeding 0. 11 sqm but notexceeding 0.18 sqm, in vertical surface etc, set and jointed in neat cement slurry and pointed in white or Coloured cement to match over 10mm thick cement plaster in CM 1:4; Complete all as specified and directed by Engineer-in-Charge. |
| 55 | Supply and Fixing PVC (SWR) pipes 110mm dia single socketed in any length with rubber ring joints fixed to walls including taking down ; Complete all as specified and directed by Engineer-in-Charge. |
| 56 | Supply and Fixing PVC(SWR)single socketed in any length with rubber ring joint fixed with wall of 75mm including taking down ; Complete all as specified and directed by Engineer-in-Charge. |
| 57 | Supply and Fixing PVC (SWR) pipes 110mm dia bend any radius; Complete all as specified and directed by Engineer-in-Charge. |
| 58 | Supply and fixing in repairs sheet glass shelf assembly 60cm long consisting of 5.5mm thick sheet glass shelf 12cm wide with aluminum alloy bracket and CP guard railing with double rail; Complete all as specified and directed by Engineer-in-Charge. |
| 59 | Material and labour for repairingRCC projection, chajjas, facia,bands, shelves, beams, RCC railing, balcony and similar works by dismantling of loose/ disintegrated portion RCC at any height and in any sitution floor (including provn of support,formwork and welding of reinforcement if required with wire mesh of eight 1.5 kg/ sqm and dubbing/ fillingwith PCC (1:2:4), type B-0, using 12.5 mm graded aggregate,15 to 25 mm thickafter applying cement slurry @ 3 kg/sqm, finished even and smooth to desired shapeand applyingtwo coats of wheater proof emulsion paint to match with existing surfacesincompeteincludingdemolation of RCC; Complete all as specified and directed by Engineer-in-Charge. |
| 60 | Material and Labour for Granite (of any type) work (table rubbed and polished) 20 mm thick in steps , jambs, pillars, window cills, cooking plateforms and like in cemnet mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite over and including 15mm thick rendering in CM 1:4; Complete all as specified and directed by Engineer-in-Charge. |
| 61 | Supply and Fixing framed work such as grills ,framed guard bars barred iron doors ;ladders framed balusters railings and similar work conforming to Fe 410-0or Fe 310-0; Complete all as specified and directed by Engineer-in-Charge. |
| 62 | Supply and Fixing in repairs CIfloor trap( long nose) 75mm bore with grating including Jointing to waste pipe fixed in PCC 1:2:4 type B-1 (using 20mm graded stone aggregate); Complete all as specified and directed by Engineer-in-Charge. |
| 63 | Material and Labour for 19mm particle board medium density flat pressed single layer type or three layer type with BWR type adhesive fixed with screws to frame work as in shelves; Complete all as specified and directed by Engineer-in-Charge. |
| 64 | Material and Labour for 18mm Prelaminated particle board, interior grade ,prelaminated one sidewith decorated choice lamination & other side balacing white lamination fixed with screws to timber fram work as in shutter.; Complete all as specified and directed by Engineer-in-Charge. |
| 65 | Material and Labour for Mild steel bar’s 6 to 8mm dia cut to length bent to shape required including cranking bending and binding with wire (annealed) not less than 0.9mm or scouring with clips quality conforming to Fe-410 or Fe 410.0; Complete all as specified and directed by Engineer-in-Charge. |
| 66 | Supply and fixing light shade vitrified ceramic tiles 10mm thick ( square/ rectangular )polished, area ofeach tiles not exceeding 0.36 sqm as in floorset jointed in neat cement slurry and pointed in white/colour cement to match with the colour of tiles over and including15mm thick bedding layer in cement mortar 1:6 ; Complete all as specified and directed by Engineer-in-Charge. |
| 67 | All as per ser item No 66 here-in-before buton vertical surfaces |
| 68 | Material and labour forpreparation of old decorated,plastered surfaces of walls, pillars cornices by steel wire brushing, scrapping down smoke soot, moulds, moss and efforescent salts and trading oil and greasy spots ofand applying Two coat of white wash on walls,pillars.cornices etc; Complete all as specified and directed by Engineer-in-Charge. |
| 69 | Material and labour forpreparation of old decorated plastered surfaces and applying two coat of white wash with lime on ceiling surface for even shade; Complete all as specified and directed by Engineer-in-Charge. |
| 70 | Material and labour forpreparation of old decorated plastered surfaces of walls, pillars cornices,scrapping down smoke soot,moulds,moss and efflorescent slats and trading oil and greasy spots and applying one coat of oil bound distemper on wall ; Complete all as specified and directed by Engineer-in-Charge. |
| 71 | Material and labour forpreparation of old decorated plastered surfaces of walls, pillars cornices,scrapping down smoke soot,moulds,moss and efflorescent slats and trading oil and greasy spots and applying two coat of oil bound distemper on wall ; Complete all as specified and directed by Engineer-in-Charge. |
| 72 | Material and labour for washing ,rubbing down/complete removal of existing coloured/Textured treatment from old surfaces of walls, pillars cornices and scrapping down smoke soot, moulds, moss and efforescent salts and trading oil and greasy spots and applying Two coats of oil bound distemper with one coat primer; Complete all as specified and directed by Engineer-in-Charge. |
| 73 | Material and Labour for 2mm thick birla wall care putty applying on walls,pillars and cornices making the edges smooth; Complete all as specified and directed by Engineer-in-Charge. |
| 74 | Material and Labour for preparing old surfaces of wall in interior surface and applying one coats of plastic emulsion paint; Complete all as specified and directed by Engineer-in-Charge. |
| 75 | Material and Labour for preparingold surfaces of ceiingand applying one coats of plastic emulsion paint; Complete all as specified and directed by Engineer-in-Charge. |
| 76 | Material and Labour for one coats of synthetic enamel paint over old wooden surface including preparation of wooden surface exceeding 10cm width or girth; Complete all as specified and directed by Engineer-in-Charge. |
| 77 | Material and Labour for one coats of synthetic enamel paint over old steel surface including preparation of old steel surface exc 10 cm width or girth; Complete all as specified and directed by Engineer-in-Charge. |
| 78 | Material and Labour forTwo coat of acrylic waterbased premium acrylic smooth exterior emulsion of approved colour with silicon additive & Color stay Technology, Excellent Dirt Pick up resistance with low VOC less than 50 gram/litre as per the LEEDS specifications,Anti Algal properties in two coats@ 1.79 ltr(undiluted)/10 sq mtr diluted withtobe applied and Cost of scafolding up to 10 m hight of building is included in this item; Complete all as specified and directed by Engineer-in-Charge. |
| 79 | Supply and fixing in repairs centre hole mixer for wash hand basin cast copper alloy fance type with capstan head chromium plated screwed down high pressure with or without lettered Hot and Cold with long screwed shanks and fly nuts screwed for iron pipe 15mmdia; Complete all as specified and directed by Engineer-in-Charge. |
| 80 | Supply and fixing in repairs CP wall mixerfour way with connecting to existing shower arrangement suitable for 15mm diabore pipe; Complete all as specified and directed by Engineer-in-Charge. |
| 81 | Supply and fixing aluminiumstrip 30mm wide, 1.5mm thick thick powder coated with rubber rings to be fixed with screws on bottom of existing shutters to guard from snakes/ frogs; Complete all as specified and directed by Engineer-in-Charge. |
| 82 | Taking down aluminium door shutters of area exc 1 sqm but not exc 4 sqm each and replacementof necessary jointing cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc and refixing in the same opening including fixing to floor stopper or door closure; Complete all as specified and directed by Engineer-in-Charge. |
| 83 | Supply and Fixing powder coatedaluminium frame for doors ,windows, ventilators with one or more rebates including joining cleats for fixing complete all as specified and directed by Engineer-In-Charge. ( Min. thickness of powder coating 50 micron) |
| 84 | Supply and Fixing powder coated aluminium glazedshutter(for doors) Al-section weighing 0.55 kg/ m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading; Complete all as specified and directed by Engineer-in-Charge. ( Min. thickness of powder coating 50 micron) |
| 85 | Supply and Fixing Sheet glass, 5.5mm thick ordinary quality, in squares,exceeding 0.50 sqm in each pane including rubber packing and aluminium beading with and incl solar control film 25 Micron reflective type sticked to glass panes as per instructions of manufacturer; Complete all as specified and directed by Engineer-in-Charge. |
| 86 | Material and Labour for Solid 18mm thick PVC board in cup board shelve as in kitchen; Complete all as specified and directed by Engineer-in-Charge. |
| 87 | Supply and fixing solid PVC5mm thick plain colour PVC sheetin strips as in back side of kitchen cabinet; Complete all as specified and directed by Engineer-in-Charge. |
| 88 | Material and Labour for 20 mm thick pvc shutter, printed one side with one coting of ultra violet chemical, glossymat finish inc 100% termite/water proof, fireretrandenteco friendly. Weight not less than 12 kg per sqm incl Steel piano hinges, steel catcher,aluminium handle100 mm long,aluminium hasp & stapplein repairs; Complete all as specified and directed by Engineer-in-Charge. |
| 89 | Material and Labour for rendering 15mm thick on fair faces of brick work or concrete surfaces on walls in CM 1:4 finishing even and smooth without using extracementincluding taking down ; Complete all as specified and directed by Engineer-in-Charge. |
| 90 | Supply and Fixing 10mm thick PVC insulation panels with EPS stuck to 1mm printed PVC sheet suitably placed in aluminium door as per specification and drawing; Complete all as specified and directed by Engineer-in-Charge. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
