Military Engineer Services-MES has published Tender For Repairs To Joinery And Other Connected Items In Md Accommodation And Otm Accommodation Under Age B/R-I Of Ge Brichgunj Port Blair. Submission Date for this Tender is 17-05-2024. Building Work Tenders in South Andamans Andaman And Nicobar Islands. Bidders can get complete Tender details and download the document.
| FileName | File Description | File Size |
| cb6ca05a-1104-4571-93fb-84f9d7a4d1a7.html | Tender Notice | 0 KB |
| 8473Atenderdoc.pdf | Tender Document | 0 KB |
| BOQ_729054.xls | Tender Document | 0 KB |
| Tendernotice_1.pdf | Tender Document | 0 KB |
| Sl. No. | Item Description |
| 1 | Taking down chowkats or frames n. exc. 1.5 Square metre each withshutters (without taking off shutter from the frame) including cutting holes to facilitate the taking down, inserting hold fast while provision and making good disturbed surfaces in CM (1:3) or PCC (1:2:4) type B-1 as required, complete all as specified and as directed |
| 2 | All as per item No 1 here in before but exc 1.5 sqm butn exc 4 sqm each. |
| 3 | Taking down shutters of any description n.exc 1 Square metre each all as specified and as directed. |
| 4 | Taking down shutters of any description exc 1 Square metre and n.exc 2 Square metre each all as specified and as directed. |
| 5 | Taking down shutters of any description exc 2 Square metre each all as specified and as directed. |
| 6 | Taking down and Refixing in the same opening of shutter of any description not exceeding 1 Sqm each including easing and adjusting as required complete all as specified and as directed. |
| 7 | All as per item No 6 here in before but exceeding 1 Sqm and not exceeding 2 Sqm |
| 8 | All as per item No 6 here in before but exceeding 2 Sqm each |
| 9 | Supply and fix Second class hard wood plain, solid, straight chowkats and frames, wrought, framed, rebated on the solid, rounded or chamfered, put together with glue pinned at joints all as specified and as directed. |
| 10 | Supply and fix 35 mm thick 2nd class hardwoodpanelled shutters with panels of timber flat on both sides( feather edges) or of veneered particle board medium density , wood particle board with commercial face veneers supplied and fitted to chowkats factory made second class hard wood, chemically face veneers etc all as specified and as directed. |
| 11 | Supply and fix 35 mm thick 2nd class hardwoodglazed/and skeletonshutters open rebated and prepared to receive glass/ gauze etc.(without sash bars) edges of framing plain chamfered or round fitted with cut and mitred beads for securing glass gauze etc. and fitted to chowkats etc. all as specified and as directed. |
| 12 | Cutting holes for inserting hold fasts in PCC block masonry built in cement mortar and making good disturbed portion in PCC 1:2:4 type B1 or in cement mortar 1:3 as required, depth of embedded portion exceeding half brick but not exceeding one brick for full brick walls, complete all as specified and as directed by Engineer-in-charge. |
| 13 | Material and labour for Preparing surface of wood and wood based materials and treating ends of posts, backs of chowkats etc area tarred exceeding 0.10 Square metre but not exceeding 0.50 Square metre each treated with tar or coal tar black paint, complete all as specified. |
| 14 | Material and labour for synthetic enamel paint of two coats over a coat of pink primer incl preparation of new wooden surfaces over 10 cm width or girth complete all as specified and as directed. |
| 15 | Taking down aluminium chowkats or partition frames of any description including glass panes, rubber packing, snap beading, particle board, etc available at site complete all as specified and as directed |
| 16 | S&F in repairs Aluminium snake guard comprising nylon bristle duly secured with aluminium flat section of minimum width 30 mm and length 900 mm fixed to bottom rail of door shutter using aluminium screws complete all as specified. |
| 17 | S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S Square tube, supplying & fixing in opening as per specification & drawing |
| 18 | S&F Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails, M.S. frame shall be covered with heat moulded plain colour PVC `C" channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S frame welded/ sealed to the stiles, & rails with suitable PVC sheet beading, and joined together with solvent cement, supplying & fixing in the frame at site as per specification & drawing. |
| 19 | S & F Aluminium anodised (minimum anodisation is50 microns) Door / window / Ventilator/partition frames and shutters (02 Nos glazed & gauzed), side hung type, without sash bars, standard aluminium grills,necessary joining cleats, glazing clips, rubber packing,anodised aluminium snap beading, screws, handles, locking arrangements etc., complete with standard aluminium sections, complete all as specified and as directed by Engineer-in-charge.(Aluminium section shall be of make Jindal/Hindalco/ Indalco). (Note:- Weight ofvarious Aluminium sections Hinges, handles and locking arrangementsshall only be considered for measurement for payment. However cost of rubber packing given in the item shall be deemed to be included in the rate quoted. Glass panels, prelaminated particle boards, aluminium wire cloth as applicable will be measured and paid separately as supplied only). |
| 20 | Supply only 4 mm thick sheet glass ordinary quality and glazing with rubber packing around the glass, in squares not exceeding 0.50 sqm in each pane complete all as specified and as directedby Engineer-in-Charge. |
| 21 | Supply only4 mm thick sheet figured glassand glazing with rubber packing around the glass, in squaresnot exceeding 0.50 sqm in each pane complete all as specified and as directed. |
| 22 | Supply only 5.5 mm thick sheet glass and glazing with rubber packing around the glass, in squares exceeding 0.50 Square metre in each pane complete all as specified and as directed. |
| 23 | Supply only 5.5 mm thick sheet glass and glazing with rubber packing around the glass, in squares not exceeding 0.50 Square metre in each pane complete all as specified and as directed. |
| 24 | Supply only 12 mm thick prelaminated particle board exterior grade both side laminated and fixed to aluminium frame all as specified. |
| 25 | Supply onlyaluminium alloy wire cloth, 0.45mm nominal dia of wire and average width of aperture 1.40 mmand fixed with aluminium wire staples completeall as specified. |
| 26 | S&F Aluminium alloy anodised sliding door bolt with hasp, staple (bolt type) 300 mm long and fixing clips of sheet cast or extruded sections and fixing bolt or cast aluminium alloy& fixed complete . |
| 27 | S&FAluminium anodised barrel tower bolt of extruded section of size 150mm long all as specified. |
| 28 | S&FAluminium anodised barrel tower bolt of extruded section of size 100mm long all as specified. |
| 29 | S&F150mm long extruded aluminium alloy anodised handles fabricated type, anodised complete all as specified. |
| 30 | S&F100mm long extruded aluminium alloy anodised handles fabricated type, anodised complete all as specified. |
| 31 | S&FAluminium (extruded section ) Door closer hydraulically regulated, designation No. 3 universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg andfixed |
| 32 | S&Ffloor door stopper of length 140mm of Aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor |
| 33 | S&F Butt hinges, 100mm length extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed type B-21, complete all as specified and directed by Engineer-in-Charge. |
| 34 | S&F Butt hinges, 75mm length extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed type C-22, complete all as specified and directed by Engineer-in-Charge. |
| 35 | S&F Stainless steel IMAX hinges for aluminium window shutters all as specified. |
| 36 | S&F as in repairs Aluminium alloy wire cloth, 0.45mm nominal dia of wire and average width of aperture 1.40mm and fixed with aluminium wire staples complete all as specified. |
| 37 | S&F as in repairs Butt hinges, 100mm length extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed type B-21, complete all as specified. |
| 38 | S&F as in repairs Butt hinges, 75mm length extruded aluminium anodised alloy with galvanised mild steel hinge pin, anodised and fixed type C-22, complete all as specified. |
| 39 | S&F as in repairs Stainless steel IMAX hinges for aluminium window shutters all as specified. |
| 40 | S&F as in repairs aluminium alloy, anodised, sliding door bolt with hasp & staple (Bolt type) 300mm long and fixing clips of sheet, cast or extruded section and fixing bolt ofcast aluminium alloy, complete all as specified. |
| 41 | S&F as in repairs aluminium alloy, anodised, sliding door bolt with hasp & staple (Bolt type) 250mm long and fixing clips of sheet, cast or extruded section and fixing bolt ofcast aluminium alloy, complete all as specified. |
| 42 | S & F as in repairs aluminium, anodised, barrel tower boltof extruded section, 150 mm long, complete all as specified. |
| 43 | S & F as in repairs aluminium, anodised, barrel tower boltof extruded section, 100 mm long, complete all as specified. |
| 44 | S & F as in repairs 100 mm long extruded, aluminium alloy anodised handle, fabricated type, complete all as specified. |
| 45 | S & F as in repairs 150 mm long extruded, aluminium alloy anodised handle, fabricated type, complete all as specified. |
| 46 | S&F in repairsAluminium (extruded section ) Door closer hydraulically regulated, designation No. 3 universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg andfixed all as specified. |
| 47 | Material and labour for hacking out old broken glass (any thickness, size, quality or description) from wooden metal/ aluminium frames, including oil putty or removing beadings etc, complete all as specified. |
| 48 | S&F in repairs 12mm thick pre-laminated particle board, exterior grade, lamination on one side with decorative choice lamination and the other side balancing white lamination fixed with screws as in door panel, complete all as specified and as directed by Engineer-in-Charge. |
| 49 | Supply and fix in repairs 18/19 mmthick pre- laminatedparticle board exterior gradepre- laminated on both side with decorative choice lamination fixed with beading as in pelmet box, cupboard shutter, cupboard shelves etc complete all as specified. |
| 50 | Material and labour in repair 12 mm plywood grade BWP, type BB fixed with beading and nails to timber frame as in partition in kitchen cabinet/cupboard shelves, board etc all as specified. |
| 51 | M&L Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed complete all as specified and as directed. |
| 52 | Supply and fix in repair Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor all as specified. |
| 53 | Material and labour for hacking out old broken glass (any thickness, size, quality or description) from wooden metal/ aluminium frames, including oil putty or removing beadings etc, complete all as specified. |
| 54 | S&F 12mm thick toughened glass in required size crystal polished at the edges and full etched design as approved by GE in different colours fixed with SS brackets of size 50x25mm, 100mm long made out of 3mm thick SS sheet at the top and bottom including provision of Dorma XLC fittings and Dorma floor springs or SS pivot, stainless steel handles 600mm D type and locking arrangement to each door, ss hinges to connect glass to glass, wall to glass connector, magnetic seal, middle seal and the water dispenser etc all as specified. |
| 55 | S&F 12mm thick toughened glass in required size crystal polished at the edges and full etched design as approved by GE in different colours fixed with SS brackets of size 50x25mm, 100mm long made out of 3mm thick SS sheet at the top and bottom including provision of ss hinges & brackets to connect to ss railings glass to glass, wall to glass connector, magnetic seal, middle seal etc all as specified. |
| 56 | S&F 12mm thick Frosted glass Sheet of required size of crystal polished at the edges as approved by GE in different colours fixed to railings, glass doors and like etc complete all as specified and directed. |
| 57 | Supply and Fix SS brackets of size 50x25mm, 100mm long made out of 3mm thick SS sheet complete all as specified and directed |
| 58 | S&F 08mm thick Sheet glass in required size crystal polished at the edges as approved by GE in different colours fixed with SS brackets of size 50x25mm, 100mm long made out of 3mm thick SS sheet at the top and bottom including provision of ss hinges & brackets to connect to ss railings glass to glass, wall to glass connector, magnetic seal, middle seal etc all as specified. |
| 59 | S&F 4.0mm thk Sheet glass, ordinary quality and glazing with oil putty/glazing clip/rubber beading etc in square n exc 0.5 sq. m in each pane complete all as specified and directed. |
| 60 | S&F 5.5mm thk Sheet glass, ordinary quality and glazing with oil putty/glazing clip etc in square n exc 0.5 sq. m in each panel complete all as specified and directed. |
| 61 | S&F 4.0mm thk Sheet glass, ordinary quality and glazing with oil putty/glazing clip etc in square exc 0.5 sq. m in each panel complete all as specified and directed. |
| 62 | S&F 5.5mm thk Sheet glass, ordinary quality and glazing with oil putty/glazing clip etc in square exc 0.5 sq. m in each panel complete all as specified and directed. |
| 63 | Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and as directed by Engineer-in-Charge. |
| 64 | Supply and Fix for Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc. complete, drilled for fixing of steel sheeting or other covering. Doors etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing, Fe 410-W (Gde-E-250) quality-B, etc complete all as specified. |
| 65 | S & F MS Steel work in tubular trusses and tubular posts/ purlins including special shaped washers etc., complete using ERW or inductionbutt welded tubes conforming to IS :1161-1979 grade st-240 including notching, drilling, fitting, riveting and/or welding or connecting with bed plate, bolt and nuts complete all as specified and as directed |
| 66 | S & F plates (Plain or chequered), channels, square cut or notched (ordinary and counter sunk) forming holes withattachment etc and fixed by riveting or welding or with nut and bolts (including nut and bolts) conforming to Fe- 410-W Grade E- 250, quality B, complete all as specified and as directed. |
| 67 | Supply and fix 1.25mm thick plain mild steel sheet in wall cladding, steel gates and similar work, cut to size, holes punched, including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40mm lap joints or welded/riveted seams including bending, turning up, mitred angles, stopped ends, outlets, etc. as required complete all as specified. |
| 68 | Supply and fix for rolled MSwork of MS plates, angles, channels etc, fixedindependently without connecting plate etc. confirming to Fe-290 (grade E-165) complete all as specified and as directed. |
| 69 | Supply and fix of 1.25mm thick steel rolling shutters, push pull or manual type without ball bearing, as specified including top cover, anchoring rod, hasp and staple and one shop coat of primer, push pull type rolling shutters made with 1.00mm thick mild steel laths, without ball bearing including top cover, anchoring rod, hasp and staple and one shop coat of primer erected in position complete all as specified and as directed. |
| 70 | S&F Collapsible steel gates, top hung, consisting of channel pickets, pivoted flat bars, top and bottom runners, brass handles etc., as specified, erected in position and securing runners with holdfasts and brackets, complete all as specified. |
| 71 | M&L for preparation new steel surfaces of any description exc 10cm width or girth when unconnected with other painting or when painted in a different tint, and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer complete all as specified and as directed. |
| 72 | M&L for preparation new steel surfaces of any description n.exc 10cm width or girth when unconnected with other painting or when painted in a different tint, and applying two coats of synthetic enamel paint over a coat of zinc chrome primer complete all as specified and as directed. |
| 73 | Supply and fixin repair decorative type curtain rod aluminium alloy including anodiseddecorative brackets etc complete. |
| 74 | Supply and fix in repairbracket decorative type brass chromium plated aluminium alloy anodised for 20mm dia curtain rod complete all as specified and as directed by Engr-in-Charge |
| 75 | Supply and fix in repairs Stainless steel 20mm dia best quality decorative type curtain rod complete all as specified. |
| 76 | Supply and fix in repair Stainless steel curtain brackets with holder for 20mm dia curtain rod decorative type complete all as specified. |
| 77 | S&F Pressed steel frames for doors of size 125 x 60 mm with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete, as specified. |
| 78 | S&F Steel door including projecting type hinges, steel handle, complete, with glazing bars, dovetailed or welded all as specified. |
| 79 | Demolition of PCC Block walling built in CM 1:6 complete all as specified and as directed |
| 80 | M&L precast cement concrete block masonry with PCC solid blocks in 1:3:6 type C1 using 20mm graded stone aggregates, exc. 10cm in width and set in CM 1:4 complete all as specified and directed. |
| 81 | M & L for rendering 10 mm thick in CM I:6 finished even and smooth without using extra cement etc complete all as specified. |
| 82 | M&L Rendering 15 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:4 and finished even and smooth without using extra cement. |
| 83 | M&L for oil bound distempering two coats over a coat of alkali resistant priming paint including preparation of new plastered or unplasteredsurfaces of wall/ gypsum boarding complete all as specified. |
| 84 | M& L for Finishing walls with Acrylic smooth exterior paint of required shade : New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) etc complete all as specified. |
| 85 | M&L for anodised aluminium snap grid frame work for ceiling 605mm x 605mm using aluminium anodised sections with 35 x 25 x 1.5 mm main tee and 25 x 25 x 1.4 mm cross tee and wall angleincluding cutting, drilling, jointing etc complete including provn of 3.15mm dia GI wire suspenders fixed with adjustable connectors and providing 4mm thick Eco Boards (decorative type) 600mm x 600mm size duly applied with two coats of oil bound distemper over a coat of primer incl dismantling existing ceilingboards(fibre, pulp, insulation, etc.) or insulation boards/slabs/blankets, any thickness, including cover fillets/ frames of any description, complete all as specified. |
| 86 | Supply and fix in repair ECO board 600x600x4mm thick decorative type fixed in existing aluminium grid frame work for false ceiling incl two coats of oil bound distemper over a coat of primer all as specified. |
| 87 | Supply and fixing in repairs Gypsum Board 12mm thick in ceiling fixed with screw as per manufacturers instructions complete all as specified and directed. |
| 88 | S&F in repairs for PVC ceiling including GI Frame work comprising of GI perimeter channel 0.55mm thick with two unequal flanges of 20 and 30 mm and web of 27mm fixed to surrounding wall ueing nylon sleeves and screws at 450mm centre to centre intermediate channel 0.9mm thick having two equal flanges of 15mm each and web of 45mm fixed to wall at approx 900mm centre to centre with gleat and steel expansion fasteners with and including wall section of 0.55mm thickness having kurled web of 50mm and flange of 28mm each with PVC sheet of 1.5mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457mm centre to centre fixed with joining for "J" trim & "T" Section including hanging of 6mm dia GI(Up to 1200mm length) adjusting level finished to roof slabs by means of ceiling cleats made out of GI flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia 40mm long complete all as specified and as directed. |
| 89 | Dismantling boarding of any description, fixed in any position with nails/screws complete all as specified. |
| 90 | Material and labour for providing 15mm thick superior quality chemically pressure treated edged glued finger jointed rubber wood boarding tongued grooved fixed over rubber wood frame work with rubber wood runner of size 50mm X 15mm fixed at 1200mm C/C horizontally by secret nailing with brass screws duly fixed to wall including provision of designed rubber wood beading to top and bottom termination of wood boarding and finished with two coats of melamine polish over a coat of honey/natural colour wood filler putty etc, including preparation and applying sand paper and finishing to a glossy/mat finish complete all as specified. Make :- RUBCO or equivalent |
| 91 | Supply and fix aluminium composite panel sheet of 3 to 4 mm thick as in wall cladding & false ceiling, fixed onaluminium frame work with plastic strips ( double sided sticker) of suitable size of varying thickness of 10mm to 30 mm , applying adhesive over aluminium sections for fixing composite panel and fixed with screws. The joints of panels shall be filled with weather proof sealant, The board shall be stuck with a layer of any colour high intensity reflective grade polymer sticker installed using epoxy adhesive complete all as specified and as directed. (Note : Necessary frame work if any will be measured and paid separately) |
| 92 | Supply and fix best quality shera planks 8 mm thick, as in claddings of approved colour and coat complete with necessary screws, studs, bolts etc to metal frame complete. (Note : Necessary frame work if any will be measured and paid separately) |
| 93 | Material and labour for stainless steel of grade SS-316, mirror polished square, rectangular or circular pipe of different size for structural shed, balusters and railing, railing chain etc, including stainless steel arc welding and bright finishing by polishing with grinding etc, including taking down old SS railing etc complete all as specified and as directed by Engineer-in-Charge. |
| 94 | M& L in repairs for decco grill of aluminium section 8 to 10mm thick |
| 95 | Supply and fixing factory made uPVC door frame made of uPVC. extruded sections having an overall dimension (extruded section profile) 48x40 mm (tolerance ± 1 mm), with wall thickness 2.0 mm (± 0.2 mm), corners of the door frame Jointed with galvanized brackets and stainless steel screws, joints mitred and Plastic welded. The hinge side vertical of the frames reinforced by galvanized M.S. tube of size 19 X 19 mm and 1mm (± 0.1 mm) wall thickness and 3 nos. stainless steel hinges fixed to the frame complete all as specified by the manufacturer and as per directions of Engineer-in-charge |
| 96 | Supply, and fixing 30 mm thick factory made Polyvinyl Chloride (PVC) door shutter made of styles and rails of a uPVC hollow section of size 60x30 mm and wall thickness 2 mm (± 0.2 mm), with inbuilt decorative moulding edging on one side. The styles and rails mitred and jointed at the corners by means ofM.S. galvanised/ plastic brackets of size 75x220 mm having wall thickness 1.0 mm and stainless steel screws. The styles of the shutter reinforced by inserting galvanised M.S. tube of size 25x20 mm and 1 mm (± 0.1 mm) wall thickenss. The lock rail made up of "H" section, a uPVC hollow section of size 100x30 mm and 2 mm ( + 0.2 mm) wall thickness fixed to the shutter styles by means of plastic/ galvanised M.S. "U" cleats. The shutter frame filled with a uPVC multichambered single panel of size not less than 620 mm, having over all thickness of 20 mm and 1 mm (± 0.1 mm) wall thickness. The panels filled vertically and tie bar at two places by insering horizontally 6 mm galvanised M.S. rod and fastened with nuts and washers, complete as specified by the manufacturer and as per directions of Engineerin-charge |
| 97 | Providing and fixing factory made uPVC white colour Sliding window Three track made of extruded profiles with wall thickness of 2.3mm (+ -0.2mm). Window profile with hollow section with multi chamber. Frame (88mm x 52mm), sliding sash (42mm x 67mm). Sliding mesh Sash (42mm x 57mm) Sliding interlock (One vertical length in each shutters) (45.5mm x 28mm), Glazing bead (24.5mm x 16mm) will be miterd cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket, 1.2+ -0.2mm thick galvanised steel Frame (30mm x 18mm) 2 nos, sliding sash (30mm x 18mm), sliding mesh sash (26mm x 10mm) profile to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners, Hardware [Touch Lock of zinc alloyed (white powder coated), steel roller system. Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and required accessories. (Note: The unit rate quoted by contractor excludes cost of glass and includes all other connected accessories. Net Opening will be measured lor payment purpose.) |
| 98 | Providing and fixing factory made uPVC white color Sliding window Two track made of extruded profiles with wall thickness of 2.3mm (+- 0.2mm). Window profile with hollow sectionwith multi chamber, Frame (60mm x 62mm). sash (42mm x 67mm). Sliding Interlock (One vertical length in each shutters) (45.5mm x 28mm). Glazing bead (24.5mmx 16mm) will he mitered cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc.. making arrangement for fixing of hardware. EPDM gasket 1.2 + -0.2mm thick galvanized steel frame (30mm x 21.5mm), Sash (30mm x 18mm), profile to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners. Hardware : [Touch Lock of zinc alloyed (white powder coated), steel roller system including 5mm thick glazing with selected quality glass, aluminum track on bottom rail for two track sliding frame, wool pine for Sliding sash and interlock.] (Note: The unit rate quoted by contractor excludes cost of glass and includes all other connected accessories. Net opening will be measured for payment purpose) |
| 99 | S&F in repais Brass Mortice lock 8 levers, vertical type, of size 100 mm complete all as specified and directed. |
| 100 | S&F in Repair CP Roller to Sliding Glass all as directed by Engineer - in - Charge. |
| 101 | S&F in Repair 15mm dia Magic Eye complete all as specified and directed. |
| 102 | Welding in repairs for metal to be welded n exc 6mm and n.exc 2.5cm in length complete all as directed by Engineer-in Charge. |
| 103 | Welding in repairs for metal to be welded n exc 6mm and exc 2.5 Cm but n.exc 5cm in length complete all as directed by Engineer-in Charge. |
| 104 | Dismantling Plain or corrugated steel sheeting any gauge, thickness, including Nainital or similar pattern roof coverings in roof covering all as specified. |
| 105 | S&F 0.50 mm thick prepainted galvalume aluminium zinc coating GI based corrugated steel sheet of colour having tensile strength of 550 Mpa as in roof covering/cladding to wall fixed with self taping screws as specified. |
| 106 | S&F 0.50 mm thick prepainted galvalume aluminium zinc coating GI based plain steel sheet of colour having tensile strength of 550 Mpa as in roof covering/cladding to wall fixed with self taping screws as specified. |
| 107 | S&F Plain, Aluminium sheeting 0.56mm thick,Alloy 31000 H4 in ridges, hips, valley gutter, drip and straight flashing (length and girth as fixed)all as specified and as directed. |
| 108 | M&L providing and injecting chemical emulsion for Post Constructional antitermite treatment along external wall where the apron is not provided using chemical emulsion at the rate of 7.5 litres per sqm of the vertical surface of the sub-structure to a depth of 300mm including excavating channel along the wall and rodding etc. complete all as specified. |
| 109 | M&L Post construction ATT along the external wall below concrete or masonry apron using chemical emulsion @ 2.25 litres per linear metre including drilling and plugging holes etc. in aprons of external walls complete all as specified and directed. |
| 110 | M&L Post construction ATT of soil under existing floors using emulsion @ one litre per hole, 300mm apart including drilling and plugging 12mm dia holes with cement mortar 1:2 (1 cement: 2 coarse sand) to match the existing floors complete all as specified. |
| 111 | M&L Post construction ATT of voids in masonry using chemical emulsion one litre per hole, at 300mm intervals including drilling holes at 45 degree and replugging them with cement mortar 1:2 (1 cement : 2 coarse sand) to match the existing floors complete all as specified. |
| 112 | M&L Post construction ATT at points of contact of wood work by chemical emulsion (in oil or kerosene-based solution) at the rate of0.5 litre/hole by drilling 6mm dia holes at a downward angle of 45 degree at 150mm centre to centre and sealing the same complete all as specified. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
