Military Engineer Services-MES has published Tender For Special Repairs To Bldg No P 14B (Bhavya) At Naval Base Under Ge Nb, Visakhapatnam. Submission Date for this Tender is 11-05-2024. Building Work Tenders in visakhapatnam Andhra Pradesh. Bidders can get complete Tender details and download the document.
| FileName | File Description | File Size |
| 33f294b1-b86c-4a95-92a4-149a5f6c40ff.html | Tender Notice | 0 KB |
| 82412Tenderdoc.pdf | Tender Document | 0 KB |
| BOQ_729092.xls | Tender Document | 0 KB |
| Tendernotice_1.pdf | Tender Document | 0 KB |
| Sl. No. | Item Description |
| 1 | Dismantling of Floor, Hearth or Wall Tiling of any description including Cement Mortar bedding [but not backing] and removing serviceable tiles to the stores andremoving rubbish / debris to a distanceexceeding 5 KM but not exceeding 10 KM complete all as specified and as directed. |
| 2 | M & L for Joint Free Glazed Ceramic Tiles, Edge Cut, Concept Type, Coloured, Premium Quality, of size 450 mm X 300 mm or 350 mm x 250 mm, 7 to 8 mm thick as in Vertical Surfaces such as Skirting, Dado etc set and jointed in neat cement slurry and pointed flush using polymer based cementitious tiling joint filler to match the shade of the tile over backing coat of 10mm thick in Cement Mortar 1:3 complete all as specified and as directed. Note: The colour / shade / design of tiles shall be as approved by GE. |
| 3 | M & L for Non Skid Ceramic Tiles, Joint Free, Coloured, Premium Quality of size exceeding 0.18 Sq.m and not exceeding 0.38 Sq.m, 7 to 8 mm thick [Square or Rectangular] as in Floors etc, set and jointed in neat cement slurry and pointed flush using polymer based cementitious tiling joint filler to match the shade of the tile including screed bed or bedding layer of mortar 15 mm thick in Cement Mortar 1:4 complete all as specified and as directed. Note: The colour / shade / design of tiles shall be as approved by GE. |
| 4 | M & L for Non Skid Ceramic Tiles, Joint Free, Coloured, Premium Quality of size exceeding 0.18 Sq.m and not exceeding 0.38 Sq.m, 7 to 8 mm thick [Square or Rectangular] asin Vertical Surfaces such as Skirting, Dado etc set and jointed in neat cement slurry and pointed flush using polymer based cementitious tiling joint filler to match the shade of the tile over backing coat of 10mm thick in Cement Mortar 1:3 complete all as specified and as directed. The colour / shade / design of tiles shall be as approved by GE. |
| 5 | M & L for Vitrified Tiles, Double Charged, Coloured, Premium Quality, of size not exceeding 0.36 Sq.m, 8 to 9 mm thick as in Floors, set and jointed in cement slurry and pointed flush using polymer based cementitious tiling joint filler to match the shade of the tile including screed bed or bedding layer of mortar 15 mm thick in Cement Mortar 1:4 complete all as specified and as directed. Note: The colour / shade / design of tiles shall be as approved by GE. |
| 6 | M & L for Vitrified Tiles, Light Shade,, Coloured, Premium Quality, of size not exceeding 0.36 Sq.m, 8 to 9 mm thick as in Vertical Surfaces such as Skirting, Dado etc, set and jointed in cement slurry and pointed flush using polymer based cementitious tiling joint filler to match the shade of the tile over backing coat of 10mm thick in Cement Mortar 1:3 complete all as specified and as directed. Note: The colour / shade / design of tiles shall be as approved by GE. |
| 7 | Dismantling of stone slabs and tiles in flooring, apron etc of any description or thickness laid, bedded and pointed in any mortar complete all as specified and directed. |
| 8 | M & L for 25 mm thick PCC 1:2:4, Type B-0, using 12.5mm graded aggregate as in levelling course / sub base for flooring, complete all as specified and as directed. |
| 9 | M & L for 75mm thick PCC 1:3:6, Type C-1, using 20mm graded aggregate as in Plinth protection etc surface finished even and smooth with out using extra cement and providing 12mm thick joints for full depth of PCC at every 3.00 m and every change of direction duly filled with mastic filling comprising of 01 Part of heated bitumen blown grade of any penetration and 3 parts of sand [all by weight] complete all as specified and as directed. |
| 10 | M & L for 100 mm thick, PCC 1:2:4, Type B-1, using 20mm graded stone aggregate as in Floors/ Hard standing etc, surface finished even and smooth with out using extra cement and spike rolling to surfaces or making impressions of expanded metal, while the concrete is green complete all as specified and as directed. |
| 11 | M & L for Forming Contraction Joint [Dummy], 30mm deep X 10mm wide, filled with sealing compound and sealed with Sealing Compound Grade "A" for 100mm thick flooring complete all as specified and directed. |
| 12 | M & L for 75 mm thick PCC 1:3:6, Type C-2, using 40 mm graded stone aggregate as in Sub base for flooring complete all as specified and as directed. |
| 13 | Demolition of Unreinforced Cement Concrete in ground floors and Pavings not exceeding 15cm thick [below or above ground level] and removing rubbish to a distance exceeding 5.0 KM but not exceeding 10.00 KMcomplete all as specified and as directed. |
| 14 | M & L for preparing newly plastered wall surfaces by using vacuum based sanding machineandapplying two coats of Acrylic washable Distemper by using auto roller/airless sprayer, over a coat of alkali resistant primer on ceiling over 1mm thick Cement based Wall Care Putty on walls by using multipurpose mixture for proper mixing of putty and putty sprayer for application of putty including rubbing with sand paper to obtain a smooth surface and making good any undulations on the surfacescomplete all as specified and as directed. Note:- The contractor shall carryout Distempering & allied works under subject work through the Authorised Applicator of the manufacturer only. The lowest bidder shall submit MoU from manufacturer to provide technical support and trained persons for carrying out Distempering & allied works through their authorised applicatorsbefore commencement of the work to GE for approval. |
| 15 | M & L for Complete removal of existing treatment of any description on wallsurfaces by using vacuum based sanding machine, removal of nails and applying two coats of Acrylic Washable Distemper by using auto roller/ airless sprayer over one coat of alkali resistant primer on wall surfaces over two or more coats of Cement based Wall Care Putty on walls by using multipurpose mixture for proper mixing of putty and putty sprayer for application of putty including rubbing with sand paper to obtain a smooth surface and making good any undulations on the surfacescomplete all as specified and as directed. Note:- The contractor shall carryout Distempering & allied works under subject work through the Authorised Applicator of the manufacturer only. The lowest bidder shall submit MoU from manufacturer to provide technical support and trained persons for carrying out Distempering & allied works through their authorised applicatorsbefore commencement of the work to GE for approval. |
| 16 | M & L for Complete removal of existing treatment of any description on Ceilingsurfaces by using vacuum based sanding machine, removal of nails and applying over two or more coats ofCement based Wall Care Putty on walls by using multipurpose mixture for proper mixing of putty and putty sprayer for application of putty including rubbing with sand paper to obtain a smooth surface and making good any undulations on the surfaces and applying two coats of Acrylic Washable Distemper by using auto roller/ airless sprayer over one of alkali resistant primer on wallsurfaces complete all as specified and as directed. Note:- The contractor shall carryout Distempering & allied works under subject work through the Authorised Applicator of the manufacturer only. The lowest bidder shall submit MoU from manufacturer to provide technical support and trained persons for carrying out Distempering & allied works through their authorised applicatorsbefore commencement of the work to GE for approval. |
| 17 | M & L for Two coats of Weather Proof Exterior Emulsion Paint [100% Acrylic] by using auto roller/ airless sprayer over a Coat of Exterior Primer over 1mm thick Cement based Wall Care Putty [primer and putty shall be of same manufacturer as that of exterior emulsion paint] by using multipurpose mixture for proper mixing of putty and putty sprayer for application of putty on newly plastered walls/ ceiling, pilasters, bands, borders, soffits of chajjas and projections including rubbing with sand paper to obtain a smooth surfacecomplete all as specified and as directed. Note:- The contractor shall carryout Exterior Emulsion Painting and allied works under subject work through the Authorised Applicator of the manufacturer only. The lowest bidder shall submit MoU from manufacturer to provide technical support and trained persons for carrying out Distempering through their authorised applicatorsbefore commencement of the work to GE for approval. |
| 18 | M & L for Complete removal of existing treatment of any description on walls/ ceiling, pilasters, bands, borders, soffits of chajjas and projections by using vacuum based sanding machine, removal of nails including rubbing with sand paper to obtain a smooth surfaces and applying Two coats of Weather Proof Exterior Emulsion Paint [100% Acrylic] by using auto roller/ airless sprayer over a Coat of Exterior Primer over two or more coats of Cement based Wall Care Putty [primer and putty shall be of same manufacturer as that of exterior emulsion paint] by using multipurpose mixture for proper mixing of putty and putty sprayer for application of putty complete all as specified and as directed. Note:- The contractor shall carryout Weather proof Exterior Emulsion Painting under subject work through the Authorised Applicator of the manufacturer only. The lowest bidder shall submit MoU from manufacturer to provide technical support and trained persons for carrying out Weather proof Exterior Emulsion Painting through their authorised applicatorsbefore commencement of the work to GE for approval. |
| 19 | M & L for One coat of synthetic enamel paint on old painted wooden surfaces of any description not other wise described over 10 cm width or girth including necessary preparation of surfaces complete all as specified and directed. |
| 20 | M & L for One coat of synthetic enamel paint on old painted steel surfaces of any description not other wise described over 10 cm width or girth including necessary preparation of surfaces complete all as specified and directed. |
| 21 | Taking down Chowkats or frame with shuttersexceeding 1.5 Sq.m but not exceeding 4.00 Sq.m eachcomplete all as specified and as directed. |
| 22 | Taking down Chowkats or frame with shutters [without taking off shutter from the frame] not exceeding 1.5 Sq.meachcomplete all as specified and as directed. |
| 23 | Taking wooden down shutters of any description exceeding 1 Sq.M but not exceeding 2 Sq.M each complete all as specified and as directed. |
| 24 | M & L for Powder coated aluminium sections [Minimum 50 Micron thick] of approved colour for Doors, Windows, Ventilators, Partitions with frame and shutters fully or partly glazed, sliding / openable including necessary jointing cleats, glazing clips, rubber beading, neoprene packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as handles, aluminium butt hinges, aluminium tower bolts, stainless steel friction hinges, locking arrangementsetc., complete all as specified and as directed. Notes: [a]The size of aluminium sections shall be all as specified in relevant IS code and MES Schedule Part - I. [b] Panel inserts such as Glass / Particle board / Gauze shall be measured and paid separately at supply only rates. [c] Weight of aluminium sections shall only be accounted for payment purpose. Weight of aluminium Handles, Butt Hinges & Tower Bolts shall not be accounted for payment purpose. [d] The unit rate quoted shall be deemed to include for cost of jointing cleats, glazing clips, rubber beading, neoprene packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as handles, aluminium butt hinges, aluminium tower bolts, stainless steel friction hinges, locking arrangementsetc., and fixing only of panel inserts ofglass / particle board / gauge etc. |
| 25 | S & F Powder Coated Aluminium Deco Grill of Model / Design No. DG 104 (7mmx4.2mm), including Powder Coated Aluminium Channel of size 10 X 10 X 1.5mm for fixing Deco Grill complete all as specified and as directed. |
| 26 | S & F Second Class Hard Wood, plain, solid, straight Chowkats and Frames, wrought, framed, rebated on the solid, rounded or chamfered, put together with glue, pinned at joints complete all as specified and directed. |
| 27 | M & L for Preparing surfaces of wood and wood based materials, steel and iron work new or old, of any description and girth not otherwise described, and treating with tar or coal tar black paint and Sanding newly tarred or painted surfaces with clean sharp sand complete all as specified and as directed. |
| 28 | S & F Mild Steel work conforming to Fe - 290, Grade E-165 as in Bands, Straps, Supports or Stays for Rainwater, Ventilating Pipes, including Bolts, if required, Hooks [Stay], heavy, for Large Gates, Hook and Pintle Hinges, large Hasps and Staples, Chains, hand made Sliding Bolts, Clamps, Hold Fasts, Wall Ties, Hooks for hanging fans, plain angle cleats for securing purlins to wood trusses or rafters, knee piece inserts, two way and three way straps, plate washers and similar small articles complete all as specified and as directed. |
| 29 | S & F Factory made35 mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and as directed. |
| 30 | S & F 4 mm thick, Veneered Decorative Plywood, Grade - I [with BWR resin] with Decorative Face Veneers on One Face, fixed with glue and including French polishing one or more coats on surfaces of any description, including cleaning and preparing the surface including a coat of wood filler complete all as specified and as directed. |
| 31 | S & F30mm thick Factory made, Second Class Hard Wood, Glazed and Skeleton Shutters, open rebated and prepared to receive glass, gauze, etc., divided into squares, with plain, chamfered or rounded, mitred and rebated Sash Bars, any numbers, edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc., sizes of members of shutters as specified in SSR Part – I, Section 8, Clause 8.24 [b] and fitted to Chowkats complete all as specified and as directed. |
| 32 | S & FFactory made 35mm thick, Second Class Hard Wood, Plain framed, Panelled Shutter [Two Panel] with Lock Rail and Panel of 9 mm BWP Commercial Ply or 12 mm Veneered Particle Board with Commercial Veneering on both faces, the size of Rail and Stile as per IS – 1003 [Part – I], Kiln Seasoned and Chemically Pressure treated and fitted to Chowkats complete all as specified and as directed. |
| 33 | M & L for two coats of synthetic enamel paint over one coat of pink primer to newly untreated wooden surfaces over 10cm width or girth including preparation of surfaces complete all as specified and as directed. |
| 34 | Supply only Stainless steel wire cloth / mesh with average aperture not exceeding 1.40 mm and dia of wire 0.36 mm and fixed with tinned tacks or Aluminium wire staples complete all as specified and as directed. |
| 35 | S & F in repairs Stainless steel wire cloth / mesh with average aperture not exceeding 1.40 mm and dia of wire 0.36 mm and fixed with tinned tacks or Aluminium wire staples with new wooden beadingincluding necessary painting to beading to match with existing surfaces complete all as specified and as directed. |
| 36 | S & F Aluminium alloy anodised Sliding Door Bolt with hasp and staple [Bolt Type] of size 300 mm and fixing clips of sheet cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy complete all as specified and as directed. |
| 37 | S & FAluminium anodised barrel Tower Bolt of size 200 mm size of extruded section complete all as specified and as directed. |
| 38 | S & FAluminium anodised barrel Tower Bolt of size 150 mm size of extruded section complete all as specified and as directed. |
| 39 | S & F 125 mm size, medium weight Butt Hinges, cold rolled, mild steel including fixtures complete all as specified and as directed. |
| 40 | S & F Floor Door Stopper of size 150 mm of aluminium alloy body and tongue, anodised, with hard drawn steel spring complete all as specified and as directed. |
| 41 | S & F300mm size mild steel ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and as directed. |
| 42 | S & F in repairs 300mm size mild steel ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and as directed. |
| 43 | Supply only 4mm thick Sheet Glass ordinary quality in squares not exceeding 0.5 Sq.m in each pane complete all as specified and as directed. |
| 44 | S & F in repair 4mm thick Sheet Glass ordinary quality in squares not exceeding 0.5 Sq.m in each pane complete all as specified and as directed. |
| 45 | Supply only 4.8mm thick Tinted Glass ordinary quality in squares not exceeding 0.5 Sq.m in each pane complete all as specified and as directed. |
| 46 | Supply only 12mm thick, Prelaminated Particle Board, Decorative Choice Lamination on Both Sides, Medium Density, Exterior Grade complete all as specified and as directed. |
| 47 | S & F in repairs 12mm thick, Prelaminated Particle Board, Decorative Choice Lamination on Both Sides, Medium Density, Exterior Grade fixed with screwscomplete all as specified and as directed. |
| 48 | S & F Factory made solid panel PVC door shutter 30 mm thick [Style] consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded wood grain printed PVC "C" Channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and wood grain printed PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail, Panelling of wood grain printed PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with 5mm thick x 15mm wide PVC sheet beading used inside stiles and rails and decorative PVC beading of 10mm x 10mm (90°), and joined together with solvent cement fixing in frame at site as per specification complete all as specified and as directed. |
| 49 | S & F Solid PVC door frame of size 50mmX47mm made out of 5mm wood grain printed PVC sheet reinforced with MS square tube fixed in opening including edges painted to match with printed sheet complete all as specified and as directed. |
| 50 | S & F 125 mm size, Butt hinges, Stainless Steel, with SS hinge pin including fixtures complete all as specified and as directed. |
| 51 | S & F Aluminium anodised Handle, of extruded section Fabricated Type of size 150mm long complete all as specified and as directed. |
| 52 | S & F in repairs 18mm thick Plywood, Grade BWR, Type BB, commercial type, fixed with nails to Wooden Frames including provision of 4mm thick teak wood lipping on all edges complete all as specified and as directed. |
| 53 | S & F 75 mm size, Butt hinges, Stainless Steel, with SS hinge pin including fixtures complete all as specified and as directed. |
| 54 | S & F Magnetic Catches with Striking Plate, First quality complete all as specified and as directed. |
| 55 | S & F 150mm long Stainless Steel Handle, of extruded section Fabricated Type complete all as specified and as directed. |
| 56 | S & F 0.9 mm thick Decorative Laminate, Type - 1 of Surface Finish, Colour and Pattern as approved, fixed with approved adhesive as per manufacturer"s instructions, including necessary preparation of surfaces complete all as specified and directed. |
| 57 | S & F 0.9 mm thick Decorative Laminate, Type - 1 of Surface Finish, Colour and Pattern as approved, fixed with approved adhesive as per manufacturer"s instructions, including taking down existing unserviceable laminates of any type or removing the existing painted surface completely and necessary preparation of surfaces complete all as specified and directed. |
| 58 | M & L for providing two components acrylic polymer modified cementitious elastomeric water proof coating, minimum 1.5 mm thickness [DFT], with nominal coverage of 2.2 Kg/Sqm including thorough preparation of surfaces by mechanical means to obtain a plain and level surface including sprinkling of clean and washed sand on final coat when wet all as per manufacturuer"s instructions, as specified and as directed. Notes: [a] The coating shall have minimum 1 N/mm2 tensile strength, elongation of a min 80% when tested as per ASTM D 412, resisting 5 bar hydrostatic pressure as per DIN 1048 and having crack bridging ability of upto 2 mm. [b] The coating shall cover all the wet areas of floor and the vertical walls for a height of minimum 4 feet above the floor. [b] The rate quoted shall be deemed to include for the following: [i] Filling of all cracks and crevices with approved epoxy based mortar and making good to receive waterproofing coating treatment. [ii] Providing additional coat reinforced with a fibre band sandwiched between 1st and 2nd coat along the periphery of the toilet floors, around protrusions and around pipes. |
| 59 | M & L for Cutting / Chipping the spalling concrete surfaces of Slabs, Beams, Columns, Fins, Facias, Parapets & Chajjas etc. and trimming, cleaning the surfaces of any thickness to receive Guniting / Plastering, preparing surfaces and applying a coat of Nito Bond AR of M/s. Fosroc Chemicals or equivalent approved bonding agent in M/s. Sika India Pvt. Ltd. or M/s. STP Ltd. orM/s. Choksey Chemicals Pvt. Ltd. or M/s Bostik India Pvt. Ltd. as per manufacturer"s instructions and providing pressure Guniting averaging 25mm thick at a pressure of not less than 6 KG / Sq.cm in Cement Mortar 1:3 with and including suitable bonding agent of M/s. Sika India Pvt. Ltd. or M/s. STP Ltd. orM/s. Choksey Chemicals Pvt. Ltd. or M/s Bostik India Pvt. Ltd. @ 5% of weight of cement for sides and soffits of Slabs, Beams, Columns, Fins, Parapets Facias & Chajjas etc., finishing surface rough conforming to proper geometrics including providing double scaffolding and safety measures as required and removal of the same on completion and disposal and depositing the demolished materialto a distance exceeding 1.5 KM but not exceeding 5 KM complete all as specified and as directed. |
| 60 | M & L for Cutting / Chipping the spalling concrete surfaces of Slabs, Beams, Columns, Fins, Facias, Parapets & Chajjas etc. and trimming, cleaning the surfaces of any thickness to receive Guniting / Plastering, preparing surfaces and applying a coat of Nito Bond AR of M/s. Fosroc Chemicals or equivalent approved bonding agent in M/s. Sika India Pvt. Ltd. or M/s. STP Ltd. orM/s. Choksey Chemicals Pvt. Ltd. or M/s Bostik India Pvt. Ltd. as per manufacturer"s instructions and providing pressure Guniting averaging 30mm thick at a pressure of not less than 6 KG / Sq.cm in Cement Mortar 1:3 with and including suitable bonding agent of M/s. Sika India Pvt. Ltd. or M/s. STP Ltd. orM/s. Choksey Chemicals Pvt. Ltd. or M/s Bostik India Pvt. Ltd. @ 5% of weight of cement for sides and soffits of Slabs, Beams, Columns, Fins, Parapets Facias & Chajjas etc., finishing surface rough conforming to proper geometrics including providing double scaffolding and safety measures as required and removal of the same on completion and disposal and depositing the demolished materialto a distance exceeding 1.5 KM but not exceeding 5 KM complete all as specified and as directed. |
| 61 | M & L for application of high build polymer modified cement mortar,1:2½ mixed with 3 Litres of Nitobond SBR of M/s. Fosroc Chemicals India [P] Ltd. or its equivalent in M/s. Sika India Pvt. Ltd. or M/s. STP Ltd. orM/s. Choksey Chemicals Pvt. Ltd. or M/s BOSTIk India Pvt. Ltd. per bag of cement in ceiling surfaces in two layers to form 10 to 20 mm thick even surface over a coat of bonding agent by mixing Nitobond SBR of M/s. Fosroc Chemicals India [P] Ltd. or its equivalent in M/s. Sika India Pvt. Ltd. or M/s. STP Ltd. orM/s. Choksey Chemicals Pvt. Ltd. or M/s BOSTIk India Pvt. Ltd. @ 1 Litre + 1 Litre water + 3 KG cement complete all as per manufacturer"s instructions. complete all as specified and as directed. |
| 62 | M & L for preparing existing steel surfaces by wire brush, etc. to obtain rust free steel surfaces to receive anti rust treatment and providing a coat of Zinc Rich Epoxy Primer [Nito Zinc Primer of M/s. Fosroc Chemicals or equivalent approved bonding agent in M/s. Sika India Pvt. Ltd. or M/s. STP Ltd. orM/s. Choksey Chemicals Pvt. Ltd. or M/s Bostik India Pvt. Ltd. or M/s Asian Paints Ltd.] as per manufacturer"s instructions to all steel surfaces as in antirust agent including providing double scaffolding and safety measures as required and removal of the same on completion complete all as specified and as directed. |
| 63 | M & L for Non-Shrink, Cementitious Micro Concrete with compressive strength not less than 50 N/ Sq.mm at 28 days as in structural strengthening of existing columns, beams and similar structural members using Rendroc RG" manufactured by M/s. Fosroc Chemicals India [P] Ltd. or its equivalent in M/s. Sika India Pvt. Ltd. or M/s. STP Ltd. orM/s. Choksey Chemicals Pvt. Ltd. or M/s Bostik India Pvt. Ltd. or M/s Asian Paints Ltd. modified with 12mm graded, clean, saturated surface dry crushed stone aggregate in the ratio as per manufacturer"s instructions, laid in columns, beams and similar structural members including use and waste of water tight formwork to facilitate pouring of micro concrete complete all as per manufacturer"s instructions including providing double scaffolding and safety measures as required and removal of the same on completion complete all as specified and as directed. Note: Measurement shall be considered for circumference at centreline of core thickness. |
| 64 | M & L for treatment around the pipes passing through walls (Core cut area) by wrapping around the pipe surfaces to be grouted around the cut bores with Acrylic bonding Agent [APL Smart Care of Asian Paints Ltd. or its equivalent in M/s. Sika India Pvt. Ltd. or M/s. STP Ltd. orM/s. Choksey Chemicals Pvt. Ltd. or M/s Bostik India Pvt. Ltd.M/s. Fosroc Chemicals India [P] Ltd.] and Grouting the gaps between the pipe and the core cutting by pouring an equal shrinkage compensated cementitious grout [APL Smart Care General purpose Grout of Asian Paints Ltd. or its equivalent in M/s. Sika India Pvt. Ltd. or M/s. STP Ltd. orM/s. Choksey Chemicals Pvt. Ltd. or M/s Bostik India Pvt. Ltd.M/s. Fosroc Chemicals India [P] Ltd.] including use and removal of effective leak-free shuttering complete all as specified and as directed |
| 65 | Note for Serial Item No. 59 to 64 :The work of structural rehabilitation shall be got carried out through the manufacturer or through their authorised applicators. The contractor shall also obtain a written guarantee for effectiveness for a period of 10 [Ten] Years from the certified date of completion of entire work from the manufacturer and submit the same to GE before claiming Final bill payment. Rate quoted is deemed to include for above provisions including providing double scaffolding and safety measures as required and removal of the same on completion and disposal and depositing the demolished material distance exceeding 5 KM but not exceeding 10.0 KM complete all as specified and as directed and nothing shall be paid extra on this account. |
| 66 | Demolition of Reinforced Cement Concrete [reinforcement cut as required to facilitate demolition] of any description and in any position not otherwise specifically provided for and removing rubbish to a distance not exceeding 1.50 KM complete all as specified and as directed. |
| 67 | M & L for Plain / Reinforced cement concrete Type B1 [Nominal Mix] 1:2:4 using 20mm graded stone aggregate cast in situ in lintels up to 1.5m span, cills, steps, seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates including weathering, slightly rounded or chamfered angles and throating as directed including use and waste of form work, complete all as specified and as directed. |
| 68 | S & F Reinforcement using High Strength Corrosion Resistant Deformed TMT Bars of Grade Fe–500D of 6mm to 8mm dia, cut to length, bent to shape required including cranking, bending, spirally for hooping, hooking ends and binding with annealed mild steel wire not less than 0.9mm dia or securing with clips or welded complete all as specified and as directed. |
| 69 | Taking down Cement Plaster of any description on brick or stone walls or concrete surfaces, ceiling surfacesetc including raking out joints, hacking for key scrubbing down with water etc and removing rubbish to a distance exceeding 1.50 KM but not exceeding 5.0 KM complete all as specified and as directed. |
| 70 | M & L for rendering 5mm thick in cement mortar 1:4 including mixing water proofing compound as per manufacturers instructions over a backing coat of 10mm thick in CM 1:6 on concrete or brick masonry surfacesand finishing the top surface even and smooth without using extra cement complete all as specified and as directed. Note: Water proofing compoundwill be measured and paid separately. |
| 71 | M & L for rendering to brick / concrete surfaces, 15 mm thick in Cement Mortar 1:4, including mixing liquid water proofing compound with superior plasticiser additive @ 100 ml per bag of cement [Smartcare Vitalia of Asian Paints or equivalent approved make specified herein after] all as per manufacturers instructions and finishing the top surface even and smooth without using extra cement complete all as specified and as directed. |
| 72 | Supply only integral water proofing compound [ISI marked] of approved make. |
| 73 | M & L for rendering to brick / concrete surfaces, 10 mm thick in Cement Mortar 1:6, surfaces finished even and smooth without using extra cement complete all as specified and as directed. |
| 74 | M & L for rendering 5 mm thick in Cement Mortar 1:3 on fair faces of concrete surface of ceiling surfaces finished even and smooth without using extra cement complete all as specified and as directed. |
| 75 | M & L for preparing newly plastered ceiling surfaces and applying three coats of white washing complete all as specified and as directed. |
| 76 | S & F in repairs plain Aluminium Sheet Alloy 31000 H4 in Ridges, Hips, Valley Gutter, drip and straight flashing of 0.71 mm thick fixed with screws complete all as specified and as directed. |
| 77 | M & L for PCC 1:2:4, Type B-1, using 20 mm graded stone aggregate as in Coping, Bed plate, cill and the like including weathering, slightly rounded or chamfered angles and throating including formwork [straight or curved] complete all as specified and directed. |
| 78 | M & L for Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust etc and brushing neat cement slurry with 3.0 KG of cement per Sq.m area, rendering 10mm thickin cement mortar 1:3 on concrete surfaces finished even and smooth without using extra cementincluding mixing of water proofing compound of approved make as per manufacturers instructions for levelling the surface smooth to receive the water proofing membrane, priming the surface with a coat of cold applied bituminous primer @ 0.50 KG per Sq.m, applying a coat of Blown Bitumen of grade 85/25 @ 1.2 Kg per Sq.m, laying Polymeric water proofing membrane of weight not less than 3.00 Kg per Sq.m reinforced with polyester non-woven fabric of weight notless than 150 Grams per Sq.m, by torch application with side over lap of 100mm & end over lap of 150mm & tucked into the chases on vertical surfaces by thermo fusion including applying a coat of Blown Bitumen of grade 85/25 @ 1.2 Kg per Sq.m on top and finished with a coat of bituminous aluminium paint @ 100 grams per Sq.m on top for water proofing treatment complete including taking down existing Roof Treatment of any description and removing rubbish to a distance exceeding 5.00 KM but not exceeding 10.0 KM complete all as specified and as directed. Note: Water proofing compound will be measured and paid separately. |
| 79 | M & L for PCC 1:5:10, Type E-2, using 40mm graded stone aggregate as in foundations and mass concrete etc complete all as specified and as directed. |
| 80 | S & F in repairs Stainless steel Towel ring complete all as per Jaquar Catalogue No. ACN-1121BN or its equivalent in Kohler / Cera / Parryware / Grohe / Crabtreecomplete all as specified. |
| 81 | S & F in repairs Stainless Steel Towel rack 600mm long with Lower Hangers, complete all as per Jaquar Catalogue No. ACN-1181S or its equivalent in Kohler / Cera / Parryware / Grohe / CrabtreeShine complete all as specified. |
| 82 | S & F in repairs Health Faucet, ABS body, including 1.25 m long flexible tube, ABS wall hook, non return valve complete all as specified. |
| 83 | S & F in repairs Two way Bib Tap, cast copper alloy, 15 mm dia, Chromium Plated, Fancy Type with crutch or butterfly handle, screwed down for iron pipe and fixed etc. complete all as per Jaquar Catalogue No. OPP-15041PM or its equivalent in Marc / Kohler / Cera / Parryware / Grohe / Crabtree / Blue Star & Silver Shine complete all as specified. |
| 84 | S & F in repairs Stainless Steel Toilet Paper Holder, Chromium plated, Fancy type complete all as per Jaquar Catalogue No. AKP-35753PSor its equivalent inKohler / Cera / Parryware / Grohe / Crabtreecomplete all as specified. |
| 85 | S & F in repairsPillar Taps, cast copper alloy, Chromium Plated, Fancy Type, 15 mm dia, with capstan head, screwed down high pressure with or with out lettered "Hot" or "Cold" with long screwed shanks and fly nuts screwed for iron pipe and fixed complete all as per Jaquar Catalogue No. OPP-15001PM or its equivalent in Marc / Kohler / Cera / Parryware / Grohe / Crabtree / Blue Star & Silver Shine complete all as specified. |
| 86 | S & F in repairs Angle Cock, 15 mm dia, cast copper alloy with capstan head, Chromium Plated, screwed down high pressure with crutch or butterfly handle for iron pipe etc. complete all as per Jaquar Catalogue No. OPP-15053PM or its equivalent inKohler / Cera / Parryware / Grohe / Crabtreecomplete all as specified |
| 87 | S & F in repairs Brass Chromium Plated Tubular Towel Rail, 20mm dia, D Type, 600 mm long between flanges complete all as specified and as directed. |
| 88 | S & F in repairs 5.5mm thick Sheet Glass Shelf assembly with Bracket, railing 60 cm long completeall as specified and as directed. |
| 89 | S & F in repairs Bib Taps, 15 mm dia, Brass Chromium Plated, Fancy Type with crutch or butterfly handle, screwed down for iron pipe and fixed etc. complete all as specified and as directed. |
| 90 | S & F in repairs Vitreous China Wash Down Water Closet [Pedestal pattern], White,of size 580 x 440 mm including flush pipe of polyethylene of lowor high density of PVC, 32mm dia, PVC Connection of 15mm Bore and 600mm long with PTMTcheck nut and union etc. including brackets and connections to pipe and flush pipe including plastic water closet seat back closed pattern with flat bottom and cover and mild steel chromium plated or aluminium hinging device and "P" or "S" trap including taking down of existing unserviceable water closet complete all as specified and as directed. |
| 91 | S & F in repairs 10 Litres capacity, PVC Valve less, Syphonic action type, low level flushing cistern, white, with inlet ball valve, float, handleincluding brackets and connections to pipe and flush pipe complete all as specified and as directed. |
| 92 | S & in repairs F Vitreous China Ware Wash Hand Basin, White, Flat Back of size 550 mm X 400 mm including brass chromium plated waste fittings with long screw shanks and fly nuts, flange end bedded in red led cement and other end fixed, rubber plug with rings including CI Brackets, cutting for and pinning in ends of brackets or erecting strand, 32mm bore PVC flexible waste pipe, PVC Connection of PTMT complete all as specified and as directed. |
| 93 | S & F in repairs, Brass Chromium Plated Shower Rose of size 125mm with or with out swivel joints fixing to steel pipes complete all as specified and as directed. |
| 94 | S & F in repairs 32mm dia PVC waste pipe 800mm long complete all as specified and as directed. |
| 95 | S & FPVC Connection of 15mm Bore and 600mm long with PTMT check nut and union etc. complete all as specified and as directed. |
| 96 | S & F 75mm outlet PVC [SWR] Floor Trap with grating including jointing with solvent cement complete all as specified and as directed. |
| 97 | S & F 75mm outlet PVC [SWR] Multi Floor Trap with grating including jointing with solvent cement complete all as specified and as directed. |
| 98 | S & F in repairs 600 mm X 450 mm Bevelled Edge Mirror of selected quality glass, 6 mm thick, mounted on 6 mm thick AC building board or commercial plywood and fixed to wooden plug with CP brass screws and cup washers complete all as specified and as directed. |
| 99 | S & F in repairsWall mixer with 3 in 1 system, 15mm dia, Single Lever cast copper alloy, chromium plated Hot and Cold including provision of hand shower & flexible pipe and connections Provision for both Hand Shower and Overhead Shower Complete with 115mm Long Bend Pipe, Connecting Legs & Wall Flange as per Jaquar Catalogue No.CON-281KN or its equivalent inKohler / Cera / Parryware / Grohe / Crabtreecomplete all as specified. |
| 100 | S & F in repairs PVC Body Cabinet Box Mirror of size 350mm X 450mm X 100mm in PTMT alloy of approved design and pattern complete all as specified and directed of Make: Supreme / National / Alphina / Prayag |
| 101 | S & F in repairs Decorative type Stainless Steel Curtain Rod of 25 mm dia including PVC rings @ 100 mm centre to centre complete all as specified and as directed. |
| 102 | S & F in repairs Decorative type Stainless Steel Decorative type Bracket and finial of size suitable to 25mm dia curtain rod fixed to wall with SS screws complete all as specified and as directed. |
| 103 | S & F in repairs 20mm outer dia of pipe, 3–layer PP–R Polypropylene random copolymer] concealed pipes of SDR 7.4 [PN–16] UV stabilised and anti microbial fusion welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded polypropylene random fittingscomplete to walls, ceilings or in floors etc. including testing complete all as specified and as directed. |
| 104 | S & F in repairs 32mm outer dia of pipe, 3–layer PP–R Polypropylene random copolymer] concealed pipes of SDR 7.4 [PN–16] UV stabilised and anti microbial fusion welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded polypropylene random fittingscomplete to walls, ceilings or in floors etc. including testing complete all as specified and as directed. |
| 105 | S & F in repairs 50mm outer dia of pipe, 3–layer PP–R Polypropylene random copolymer] concealed pipes of SDR 7.4 [PN–16] UV stabilised and anti microbial fusion welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded polypropylene random fittingscomplete to walls, ceilings or in floors etc. including testing complete all as specified and as directed. |
| 106 | S & F Gun Metal Globe or Gate Valve of Class - I, Pressure Tested of 1.5 Mpa, 20 mm bore with iron wheel head, screwed both ends for iron pipe, conforming to IS, ISI Marked complete all specified and as directed. |
| 107 | S & F Gun Metal Globe or Gate Valve of Class - I, Pressure Tested of 1.5 Mpa, 32 mm bore with iron wheel head, screwed both ends for iron pipe, conforming to IS, ISI Marked complete all specified and as directed. |
| 108 | S & F Gun Metal Globe or Gate Valve of Class - I, Pressure Tested of 1.5 Mpa, 50 mm bore with iron wheel head, screwed both ends for iron pipe, conforming to IS, ISI Marked complete all specified and as directed. |
| 109 | S & F 110mm bore UPVC [SWR] pipes single socketed, in any length with rubber ring joints, fixed to walls including necessary brackets, clamps as in rain water down pipesincluding taking up / down unserviceable / cracked rain water pipes including taking out joints of any type complete all as specified and as directed. |
| 110 | S & F 110mm bore UPVC [SWR] pipes single socketed, in any length with rubber ring joints, laid in trenches or in floorsincluding necessary brackets, clamps as in rain water down pipesincluding taking up / down unserviceable / cracked rain water pipes including taking out joints of any type complete all as specified and as directed. |
| 111 | S & F 75mm bore UPVC [SWR] pipes single socketed, in any length with rubber ring joints, laid in trenches or in floorsincluding necessary brackets, clamps as in rain water down pipesincluding taking up / down unserviceable / cracked rain water pipes including taking out joints of any type complete all as specified and as directed. |
| 112 | S & F 75mm bore UPVC [SWR] pipes single socketed, in any length with rubber ring joints, fixed to walls including necessary brackets, clamps as in rain water down pipesincluding taking up / down unserviceable / cracked rain water pipes including taking out joints of any type complete all as specified and as directed. |
| 113 | S & F 110 mm bore PVC [SWR] Bends of any radius including jointing with solvent cement complete all as specified and as directed. |
| 114 | S & F 110 mm bore PVC [SWR] Bends of any radius with Access Door including jointing with solvent cement complete all as specified and as directed. |
| 115 | S & F 75 mm bore PVC [SWR] Bends of any radius including jointing with solvent cement complete all as specified and as directed. |
| 116 | S & F 75 mm bore PVC [SWR] Bends of any radius with Access Door including jointing with solvent cement complete all as specified and as directed. |
| 117 | S & F 75 mm bore PVC [SWR] Junction Single [Single "T"] equal or unequal including jointing with solvent cement complete all as specified and as directed. |
| 118 | S & F 75 mm bore PVC [SWR] Junction Single [Single "T"] equal or unequal with Access Door including jointing with solvent cement complete all as specified and as directed. |
| 119 | S & F 110 mm bore PVC [SWR] Junction Single [Single "T"] equal or unequal with Access Door including jointing with solvent cement complete all as specified and as directed. |
| 120 | S & F 110 mm bore PVC [SWR] Vent Cowl including jointing with solvent cement complete all as specified and as directed. |
| 121 | S & F 125/110mm bore PVC [SWR] Gully Trap with grating including jointing with solvent cement complete all as specified and as directed. |
| 122 | M & L for providing and injecting chemical emulsion for Post Constructional Anti - termite Treatment at points of contact of wood work by chemical emulsion [in oil or kerosene based solution] @ 0.5 litre per hole by drilling 6 mm dia holes at a downward angle of 45 degrees at 150 mm centre to centre and sealing the same complete all as specified and as directed. |
| 123 | M & L for providing and injecting chemical emulsion for Post Constructional Anti - termite Treatment of soil under existing floors using chemical emulsion @ 1 litre per hole, 300 mm apart including drilling and plugging 12 mm dia holes with cement mortar 1:2 to match the existing floors complete all as specified and as directed |
| 124 | M & L for providing and injecting chemical emulsion for Post Constructional Anti - termite Treatment along external walls below concrete or masonry apron using chemical emulsion @ 2.25 litres per RM by drilling 12 mm dia holes up to 300 mm deep and 300 mm centre to centre including plugging holes complete all as specified and as directed. |
| 125 | S & F Rotational Moulded Polythene HDPE Water Tanks, Triple Layered, ISI Marked, Cylindrical & Vertical Type 2000 Litres Capacity hoisted and fixed in position including provision of 40mm/25mm dia spouts for connecting inlet, outlet, over flow and washout pipes complete including taking down old tanks and removing to store complete all as specified and as directed. |
| 126 | S & F in repairs Ball Valves, 20 mm Bore, high pressure of PTMT with epoxy coated Aluminium rod & high-density plastic ball screwed for iron pipe etc complete all as specified and as directed. |
| 127 | Demolition of Brick / Stone Masonry built in Cement Mortar including all quoins arches pillars etc and removing rubbish to a distance exceeding 1.50 KM and not exceeding 5.0 KM complete all as specified and as directed. |
| 128 | M & L for providing Precast Cement Concrete 1:2:4, Type B-1 using 20mm graded stone aggregate as in solid building blocks or slabs exceeding 10cm thick (with plain or interlocking joints as directed) setting in mortar 1:4 including demolition of existing unserviceable PCC block work of any description complete all as specified and directed. |
| 129 | M & L for brick work in half brick thick walls using Fly Ash bricks straight or curved on plan to any radius built in Cement Mortar 1:4including 2 Nos of 8mm dia bars at every fourth course of brick work complete all as specified and as directed. |
| 130 | M & L for One coat of white wash on old decorated surfaces of ceilingincluding necessary preparation by brooming down or steel wire brushing complete all as specified and as directed. |
| 131 | M & L for One coat of white wash on old decorated surfaces of wallincluding necessary preparation by brooming down or steel wire brushing complete all as specified and as directed. |
| 132 | M & L for Marble Stone Slabs of 18 to 20 mm thick ofGreen Colour as in Flooring, Treads and Risers of Steps, Landings of Staircase etc. with machine cut edges, Table rubbed and prepolished to smooth mirror finish all to required sizes, slabs shall be of design / pattern as directed, including inlays, borders, margins, set and bedded with grey cement [slurry] and jointed andpointed flush using polymer based cementitious joint filler to match the shade of the Slabsincluding screed bed or bedding layer of mortar 20 mm thick in Cement Mortar 1:4 complete all as specified and as directed. Note: Single stone slab shall be used for entire width of Steps, Risers & Landing etc. and joints shall match with the flooring. The edges of treads shall be bull nosed / half rounded. The edges of the treads and landings shall also be provided with three Nos of grooves. |
| 133 | S & F Stainless Steel Railing made with Stainless Steel Pipes of wall thickness not less than 1.6mm, of Grade AISI 316L, standard quality, bright polish finish, using 50mm dia pipes for hand rail, 25mm dia pipes for vertical supports / balusters and 25mm dia pipes as in tie bars in three layers, SS tubes shall be welded at the turnings and junctions, welded portions shall be completely grinded and brought to bright and smooth finish including all bends, elbows, making holes in the floor / steps, grouting with epoxy to achieve full strength of railing complete all as specified and as directed. |
| 134 | Taking down carefully copper / aluminium point wiring [light, fan, socket or power] complete including fittings such as switches, ceiling roses, pendants, regulators, sockets etc. and making good the disturbed surfaces all as per existing complete all as specified and as directed. |
| 135 | Taking down MCCB DBs, MCB DBs, SPN Enclosures along with MCCBs, MCBs etc of any description and any capacity and making good the disturbed surfaces all as per existing complete all as specified and as directed. |
| 136 | Taking down carefully submain wiring of any description and size complete including wooden battens / conduits / casing capping and making good the disturbed surfaces all as per existing complete all as specified and as directed. |
| 137 | Taking down existing Light Fittings of any description and refixing the same after repairs to buildings, at same location or at new location including connecting up with three core PVC insulated, sheathed flexible copper conductor cable of size 1.5 Sq.mm including cleaning and carrying out minor repairs complete all as specified and as directed. |
| 138 | M & L for Taking down Exhaust Fan of any description from its position and refixing the same after repairs to buildings, at same place or at new place including connecting up with three core PVC insulated, sheathed flexible copper conductor cable of size 1.5 Sq.mm, cleaning, greasing etc and replacement of Spares such as Capacitor 4 Mfd, Nuts & Bolts, washers, etc. including cleaning, greasing and spray painting with two coats of synthetic enamel paint of approved colour over a coat of zinc chrome primer after filling cavities with filler and complete all as specified and directed. |
| 139 | M & L for Taking down Ceiling Fan of any description from its position and refixing the same after repairs to buildings, at same place or at new place including connecting up with three core PVC insulated, sheathed flexible copper conductor cable of size 1.5 Sq.mm, replacement of Spares such as Capacitor 2.5 Mfd, Bearings, Shaft Bushes, Capacitor, Cotter Pin, Clamps, Rubber Bushes, Nuts & Bolts etc. as required and also including cleaning, greasing and spray painting with two coats of synthetic enamel paint of approved colour over a coat of zinc chrome primer after filling cavities with filler and complete all as specified and directed. |
| 140 | S & F Rigid non-metallic 25 mm dia PVC conduit exclusive of boxes(junction/terminal) but inclusive of all tees, bends, elbows, reducer, bell mouth tube ends and fixing accessories such as couplers, lock nuts, saddles pipe hook etc. complete all as specified and as directed. |
| 141 | S & F Rigid non-metallic 20 mm dia PVC conduit exclusive of boxes(junction/terminal) but inclusive of all tees, bends, elbows, reducer, bell mouth tube ends and fixing accessories such as couplers, lock nuts, saddles pipe hook etc. complete all as specified and as directed. |
| 142 | M & L for Point Wiring complete with 1100 Volts, FRLS Grade, 1.5 Sq.mm, Single Core, Two runs, PVC Insulated, Unsheathed, Multistranded Copper Conductor Cable, conforming to IS - 694 drawn through and including heavy duty PVC Conduit, 20 mm dia including all accessories concealed in Walls / Roofs / Floors / Ceiling etc. and Metal GI Flush Box of suitable size and thickness including Modular type Base / Grid Frame & Cover Frame for housing Modular Type Switches, Sockets and Regulators etc. concealed in walls, including 1100 Volts, FRLS Grade, 1.5 Sq.mm, Single Core, PVC Insulated, Unsheathed, Multistranded Copper Conductor cable as earth continuity conductor with colour coding and connecting to Earth Dolly for One Light / Fan Point / Bell Pointcomplete all as specified and as directed. |
| 143 | All as per Serial Item No. 141 above but One 3 Pin Socket Outlet 6 Amps on same Board complete all as specified. |
| 144 | All as per Serial Item No. 141 above but one 3 PinSocket Outlet 6 Ampson independent board, complete all as specified. |
| 145 | All as per Serial Item No. 141 above but one 3 PinSocket Outlet 16 Amps power point on independent board, with 1100 Volts, FRLS grade, 2.5 Sq.mm, Single Core, PVC Insulated, Unsheathed, Multistranded Copper Conductor Cable confirming to IS - 694 and including 1100 Volts, FRLS grade, 2.5 Sq.mm, Single Core, PVC Insulated, Unsheathed, Multistranded Copper Conductor Cable as Earth Continuity Conductor. |
| 146 | All as per Serial Item No. 141 above but one 3 PinSocket Outlet 16 Amps power point on independent board, with 1100 Volts, FRLS grade, 4 Sq.mm, Single Core, PVC Insulated, Unsheathed, Multistranded Copper Conductor Cable confirming to IS - 694 and including 1100 Volts, FRLS grade, 4 Sq.mm, Single Core, PVC Insulated, Unsheathed, Multistranded Copper Conductor Cable as Earth Continuity Conductor. |
| 147 | Dismantling existing Geyser of any type and capacity from its position, cleaning, servicing, replacement and provision of required minor unserviceable parts / fittings, re-assembling, spray painting the external surfaces with synthetic enamel paint and re-fixing the same in position including connecting up water and electric connections and testing complete all as specified and as directed. |
| 148 | S & F in repairs modular white cover plate 1 module with frame complete all as specified and as directed. |
| 149 | S & F in repairs modular white cover plate 2 module with frame complete all as specified and as directed. |
| 150 | S & F in repairs modular white cover plate 3 module with frame complete all as specified and as directed. |
| 151 | S & F in repairs modular white cover plate 6 module with frame complete all as specified and as directed. |
| 152 | S & F in repairs modular white cover plate 8 module with frame complete all as specified and as directed. |
| 153 | S & F in repairs modular metal flush box 1 module complete all as specified and as directed. |
| 154 | S & F in repairs modular metal flush box 2 module complete all as specified and as directed. |
| 155 | S & F in repairs modular metal flush box 3 module complete all as specified and as directed. |
| 156 | S & F in repairs modular metal flush box 6 module complete all as specified and as directed. |
| 157 | S & F in repairs modular metal flush box 8 module complete all as specified and as directed. |
| 158 | S & F Telephone Socket / Jack with Shutter, RJ-11, Modular Type, One Module including suitable Modular Type Pressed Metal Flush Box made out of 2mm thick MS Sheet, Modular type Base / Grid Frame & Cover Frame complete all as specified and as directed. |
| 159 | S & F Computer jack Cat 6 with shutter with metal box minicomplete all as specified and as directed. |
| 160 | S & F Switch, Modular Type, One Module, Single Pole, One Way, 6 Amps, 230 Volts complete all as specified and as directed. |
| 161 | S & F in repairs Switch, Modular Type, One Module, Single Pole, One Way, 6 Amps, 230 Volts complete all as specified and as directed. |
| 162 | S & F Switch Modular type, one module, Single pole, one way, 16 Amps, 230 Volts complete all as specified and as directed. |
| 163 | S & F in repairs Switch Modular type, one module, Single pole, one way, 16 Amps, 230 Volts complete all as specified and as directed. |
| 164 | S & F Bell Push, Modular type, one module, Single Pole, 6 Amps, 230 Volts complete all as specified and as directed. |
| 165 | S & F in repairs Bell Push, Modular type, one module, Single Pole, 6 Amps, 230 Volts complete all as specified and as directed. |
| 166 | S & F Ceiling Rose, PVC Body, 65 X 50 mm, Three Terminals, 230 Volts complete all as specified and as directed. |
| 167 | S & F in repairs Ceiling Rose, PVC Body, 65 X 50 mm, Three Terminals, 230 Volts complete all as specified and as directed. |
| 168 | S & F Socket Outlet, 3 Pin, 6 Amps, Modular Type, Two Modules, 230 Volts, complete all as specified and as directed. |
| 169 | S & F in repairs Socket Outlet, 3 Pin, 6 Amps, Modular Type, Two Modules, 230 Volts, complete all as specified and as directed. |
| 170 | S & FSocket Outlet, 3 pin, 16 Amps cum 6 Amps, Modular Type, Two Modules, Multipurpose, 230 Volts complete all as specified and as directed. |
| 171 | S & Fin repairs Socket Outlet, 3 pin, 16 Amps cum 6 Amps, Modular Type, Two Modules, Multipurpose, 230 Volts complete all as specified and as directed. |
| 172 | S & F Electronic Fan Regulator, Stepped Type, Modular Type, Two Module, 120 W, AC, 230 Volts, Single Pole complete all as specified and as directed. |
| 173 | S & F in repairs Electronic Fan Regulator, Stepped Type, Modular Type, Two Module, 120 W, AC, 230 Volts, Single Pole complete all as specified and as directed. |
| 174 | M & L for Sub main wiring with 2 runs of single core 1.5 Sq.mm Single Core, PVC Insulated, Unsheathed, Multistranded Copper Conductor cable, 1100 Volts, FRLS Grade, ISI Marked, drawing through and including heavy duty PVC Conduit, 20 mm dia with all accessories concealed in Walls / Roofs / Floors / Ceiling etc. or surface type / semi concealed type including One run of 1.5 Sq.mm, Single Core, PVC Insulated, Unsheathed, Multistranded Copper Conductor cable, 1100 Volts, FRLS Grade earth continuity conductor complete all as specified and as directed. Note: 3 runs of 1.5 Sq.mm & one run of 20 mm dia PVC Conduit will be measured as one unit. |
| 175 | M & L for Sub main wiring with 2 runs of single core 2.5 Sq.mm Single Core, PVC Insulated, Unsheathed, Multistranded Copper Conductor cable, 1100 Volts, FRLS Grade, ISI Marked, drawing through and including heavy duty PVC Conduit, 20 mm dia with all accessories concealed in Walls / Roofs / Floors / Ceiling etc. including One run of 2.5 Sq.mm, Single Core, PVC Insulated, Unsheathed, Multistranded Copper Conductor cable, 1100 Volts, FRLS Grade earth continuity conductorcomplete all as specified and as directed. Note: 3 runs of 2.5 Sq.mm & one run of 20 mm dia PVC Conduit will be measured as one unit. |
| 176 | M & L for Sub main wiring with 2 runs of single core 4 Sq.mm Single Core, PVC Insulated, Unsheathed, Multistranded Copper Conductor cable, 1100 Volts, FRLS Grade, ISI Marked, drawing through and including heavy duty PVC Conduit, 20 mm dia with all accessories concealed in Walls / Roofs / Floors / Ceiling etc. including One run of 4 Sq.mm, Single Core, PVC Insulated, Unsheathed, Multistranded Copper Conductor cable, 1100 Volts, FRLS Grade earth continuity conductorincluding taking down old unserviceable submain wiringand wooden battens / conduits / casing capping and making good the disturbed surfaces all as per existing complete all as specified and as directed. Note: 3 runs of 4 Sq.mm & one run of 20 mm dia PVC Conduit will be measured as one unit. |
| 177 | M & L for Sub main wiring with 2 runs of single core 6 Sq.mm Single Core, PVC Insulated, Unsheathed, Multistranded Copper Conductor cable, 1100 Volts, FRLS Grade, ISI Marked, drawing through and including heavy duty PVC Conduit, 25 mm dia with all accessories concealed in Walls / Roofs / Floors / Ceiling etc. including One run of 6 Sq.mm, Single Core, PVC Insulated, Unsheathed, Multistranded Copper Conductor cable, 1100 Volts, FRLS Grade earth continuity conductor complete all as per existing complete all as specified and as directed. Note: 3 runs of 6 Sq.mm & one run of 25 mm dia PVC Conduit will be measured as one unit. |
| 178 | S & F SPNsheet metal enclosure, Modular type, with two pin and earth plug and socket, with andincluding One MCB, SP, 20 Amps, 10 KA, C curve, 240 Volts complete all as specified and as directed. |
| 179 | S & FMCB DB, SPN, 8 Way, 240 Volts, with DIN Channel, Double Door with 100 Amps rated bus bar suitable for mounting MCBs flush mounted with wallcomplete all as specified and as directed. |
| 180 | S & F MCB, SPN, 6 to 32 Amps, 10 KA, C Curve, AC, 230 Volts, 50 Hz complete all as specified and as directed. |
| 181 | S & F MCB, SP, 6 to 32 Amps, 10 KA, C Curve, AC, 240 Volts, 50 Hz complete all as specified and as directed. |
| 182 | S & FMCCB415 V , 16 KA, 4 Pole, 125 Amps capacity complete all as specified and as directed. |
| 183 | S & FMCCB DB, VTPN, 8 Way, 415 Volts with DIN Channel, N3 Frame, Double Door with 250 Amps rated bus bar with MCCB as incomer complete all as specified and as directed. |
| 184 | Earthing complete with Galvanised Steel Earth Plate Electrode 600 X 600 X 6 mm thick burried directly in ground [earth pit not less than 2.25 m deep below ground level] with top edge of Plate not less than 1.50 m below normal ground level connected to 32 X 6mm GI Strip [Earth Lead] and GI pipe 50 mm, Medium Grade for earthing lead protection to the extent of maximum 7.5m, Earth Plate Electrode surrounded by 150mm thick packed layers of Charcoal and Common Salt filled in alternate layers, connected to the Plate by means of GI Bolts & Nuts complete all as per Electrical Plate No. 3 of SSR Part – I, connected to panel / DB including testing on completion including main earthing, Charcoal, Common Salt, PCC [1:2:4, Type B1] Pit with RCC 1:2:4, Type B1 Cover, 50 mm thick with 6 Nos, 8 mm dia TMT bars in both ways, MS frame made with 40 X 40 X 6 mm Angle Iron, MS Funnel with 20 mm bore, medium grade GI Watering pipe, wire mesh, earth work excavation, return filling, removal of surplus soil etc. including taking down of existing earthing set complete all as specified. |
| 185 | S & F in repairs Stationary Louvers suitable for Exhaust Fan of 300mm sweep made out of powder coated aluminium anodized sheet of minimum 1 mm thick with non removable blades fixed permanently at 45 degree angle for protection from rain including aluminium wire mess for protection of birds complete all as specified and as directed. |
| 186 | S & F in repairs Surface & wall mounted Energy efficient LED Tube Light Fitting, of not less than 1000 Lumens output, 5700 K of cool white, with extruded aluminium / CRCA housing and robust construction with necessary acrylic diffuser & integrated electronic driver, all accessories internally prewired and connecting up with twin core PVC insulated, sheathed flexible copper conductor cable of size 1.5 Sq.mmcomplete all as specified and as directed. Note: Light fitting shall be of PF>0.95 |
| 187 | S & F in repairs Surface & wall mounted Energy efficient LED Tube Light Fitting, of not less than 2000 Lumens output, 5700 K of cool white, with extruded aluminium / CRCA housing and robust construction with necessary acrylic diffuser & integrated electronic driver, all accessories internally prewired and connecting up with twin core PVC insulated, sheathed flexible copper conductor cable of size 1.5 Sq.mm complete all as specified and as directed. Note: Light fitting shall be of PF>0.95 |
| 188 | S & F in repairs Energy efficient & Long life Security Light Luminaire, 35 Watt with Pressure die-cast Aluminium housing, IP 65 Protection, heat resistant glass cover, high power LEDs as light source, electronic driver including GI Bracket made out of 32 mm bore GI Tube, Medium Grade of size not exceeding 2.00 m in length and bent to shape required and fixed with 2 Nos of Pole fitting Clamps made out of MS Flat of size 50 X 6mm, bolts, nuts, washers and painting with two coats of aluminium paint over a coat of primer red oxide zinc chrome primer and connecting up with three core PVC insulated, sheathed flexible copper conductor cable of size 1.5 Sq.mm complete all as specified and as directed. Note: Light fitting shall be of PF>0.95 |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
