Military Engineer Services-MES has published Tender For Periodical Services And Camouflage Painting To Rigid Pavements, Dispersals And Building Etc Of Tech Area At Af Stn Ambala Under Ge (Af) Ambala. Submission Date for this Tender is 18-05-2024. Building Work Tenders in ambala Haryana. Bidders can get complete Tender details and download the document.
| FileName | File Description | File Size |
| 949209b9-8691-4486-a4f9-ab5aa3a5b04e.html | Tender Notice | 0 KB |
| 94TenderPages.pdf | Tender Document | 0 KB |
| BOQ_729012.xls | Tender Document | 0 KB |
| Tendernotice_1.pdf | Tender Document | 0 KB |
| Sl. No. | Item Description |
| 1 | Taking down cement plaster from brick or stone wall etc including rackingoutjoint, hacking for key scrubbing down with water etc complete all as specified and as directedby Engineer-in-charge. |
| 2 | M&L for rough cast plaster including 15mm thick rendering in CM 1:3 on brick wall or concrete surfaces complete all as specified in SSR Part - I clause 14.22 complete all as specified and directed. Note : Rough cast finish to be as below :- After applying the under coat of cement mortar 1:3 and while it is still in plasic state the rough cast mixture consisting of crushed stone or fine gravel agg (which is generally of size between 6 to 12mm depending on the texture required ) mixed with course sand and cement in the ratio of 1 : 1 : 1 shallbe applied and finished even. The mixof cement and sand shall be made slightly wetter than normal for rendering to ensure that larger agg are thoroughly covered. |
| 3 | M&L for rendering 15mm thick on fair face of brick walls or concrete surfaces in CM 1:4 mixed with WPC @ of 3% by wt of cementfinished even and smooth without using extra cement complete all as specified and directed. |
| 4 | M&L for preparation of newly plastered surfaces and applying two coat ofexterior acrylic emulsion paint in camouflaging pattern of any shape and to any size, over a coat of primer, complete all as specified and directed by Engineer-in-charge. Note: Sample of camouflage pattern to be approved as per the user requirement) |
| 5 | Supply only Dr fixit integral water proofing comound/liquid etc complete all as specified and directed by Engr-in-Charge. |
| 6 | M&L for applying one coat of whitewash on plastered or unplastered old decorated surfaces on wall at any height in Bldgs / Blast Pensincl preparation of surfaces and filling all holes with putty etc complete all as specified and directed by Engr-in-Charge |
| 7 | All as per BOQ srl item No 6.00 (here-in-before but as on ceilling at any heightin Bldgs / Blast Pens complete all as specified and directed. Note for BOQ srl item No. 6.00 & 7.00 : Cost of necessary scaffolding and safety measures of labours shall be deemed to be included in the quoted rate. |
| 8 | M&L for 15mm thick rendering on brick work or concrete surfaces in CM 1:6 finished even and smooth without using extra cement complete all as specified and directed. |
| 9 | M&L for Preparation ofnewlyplastered surface of any description and applying two coats ofdistemper oil emulsion over a coat ofalkali-resistantprimer over 1 mm putty complete all as specified and directed by Engr-in-charge. |
| 10 | M&L for preparation ofplastered or unplastered surfaces of walls and applying one coats of distemper oil emulsion on old surfacesupto any height including necessary scaffolding as required, complete all as specified and directed. |
| 11 | M&Lfor one coat of synthetic enamel paint on old painted steelsurfaces as in walls / roof trusses/purlins/rafters/angle iron posts etc complete all as specified and directed. |
| 12 | M&L for complete removal of existingtreatment from old decorated plastered surface of wall and applying two coats of distemper oil emulsioncomplete all as specified and directed. |
| 13 | M&L for one coat of painting as per manufacturer instruction to PCC pavements or concretesurface of Runway/ taxi tracks and the like exceeding 10 cm wide with Water proofof any shade in camouflaging pattern as approved by Engineer-in-Charge including cleaning all foreign materials, dust etc by water or air blower and scrapers complete all as specified and directed by Engineer-in-Charge. |
| 14 | Hacking out old broken glass(any thickness) size , quality or description from wooden/steel frames etc complete all as specified and directed. |
| 15 | S&F3mm thick sheet glass ordinary quality of glazing with oil putty or wooden beads in square not exceeding 0.5 sqm each panes complete all as specified and directed. |
| 16 | S&F3mm thick figured glass, pin head type glazing with oil putty or wooden beads in square not exceeding 0.5 sqm each panes complete all as specified and directed. |
| 17 | M&L for preparation of old or previously treated surfaces of RCC / Stone / Concrete / brick walls/ Asbestos Cement Sheet or plastered surfaces and applying one coat ofexterior acrylic emulsion paint in camouflaging pattern of any shape andany size complete all as specified and directed by Engineer-in-charge, Note: Sample of camouflage pattern to be approved as per the user requirement. |
| 18 | M&L for complete removalof old or previously treated surfaces of RCC / Stone / Concrete / brick walls/ Asbestos Cement Sheet or plastered surfaces and applying two coat ofexterior acrylic emulsion paint in camouflaging pattern of any shape andany size over a coat of primer complete all as specified and directed by Engineer-in-charge. Note: Sample of camouflage pattern to be approved as per the user requirement. |
| 19 | S&F in repair stainless steel wire cloth 0.36mm minimal dia of wire and average width of aperture 1.4mm fixed with stainless steel staples towindows complete all as specified and directed. . |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
