Military Engineer Services-MES has published Tender For Periodical Services And Repair To Roof Sheet False Ceiling, Aluminuim Joinery, Tiling, Platering, Sanitary Work Rwp And Misc Work Of Base Hosp, Echs, Sho, Base Hosp Offrs Mess, Base House In The Area Of Age Em (Hosp) Under Ge E/M Lucknow. Submission Date for this Tender is 14-05-2024. Shed Construction Tenders in lucknow Uttar Pradesh. Bidders can get complete Tender details and download the document.
| FileName | File Description | File Size |
| 243d7d5c-dfd1-44a7-85eb-37875a112c2f.html | Tender Notice | 0 KB |
| BOQ_728881.xls | Tender Document | 0 KB |
| Tender32.pdf | Tender Document | 0 KB |
| Tendernotice_1.pdf | Tender Document | 0 KB |
| Sl. No. | Item Description |
| 1 | M&L for preparation of old painted surfaces of walls by brooming down or steel wire brushing scraping down smoke soot, moulds moss and efflorescent salts, trading oil and greasy spots and applying one coat of white wash all as specified |
| 2 | All as per item No. 1 above but applying one coat of white wash on ceiling. |
| 3 | All as per item No 1 but but applying two coats of white wash on wall surfaces. |
| 4 | M&L for preparation of old painted plastered or unplastered surfaces of walls by washing, rubbing down & stopping etc, and applying one coat of cement base paint of any tint / shade all as specified. |
| 5 | All as per item No 4 above but applying two coats of cement base paint on walls. |
| 6 | M&L for preparation of old painted surfaces of walls by washing, rubbing down & stopping etc, and applying one coat of distemper oil emulsion of any tint / shade all as specified. |
| 7 | All as per item No.6 above but applying two coats of distemper oil emulsion on walls |
| 8 | All as per item No 6 above but applying one coat of distemper oil emulsion on ceiling. |
| 9 | M&L for preparation of old painted surfaces of steel of any description, not otherwise described over 10 cm width or girth, and applying one coat of synthetic enamel paint all as specified. |
| 10 | M&L for preparation of old painted surfaces of wood of any description, not otherwise described over 10 cm width or girth, including knotting and stopping and applying one coat of synthetic enamel paint all as specified. |
| 11 | M&L for Complete removal of existing treatment fromPlastered surfaces of walls including scraping down smoke soots, moulds, moss and trading oil and greasy spots etc including cornices, pilasters etc and applying two coats of oil bound distemper over one coat of primer over and including 2 mm thick cement base wall care putty complete all as specified and directed by Engineer-in-charge. |
| 12 | M&L for preparation of old painted brick, stone, concrete, AC or plastered surfaces of any description over 10cm width or girth not otherwise described and applying one coat of synthetic enamel paint complete all as specified and directed. |
| 13 | M&L preparation of old painted surface of walls and applying one coat exterior emulsion weather coat paint of Apex (Asian Paint) / Weather coat (Berger) / Excel Top Guard (Nerolac) complete all as specified and directed. |
| 14 | M&L preparation of old painted surface of walls and applying two coats exterior emulsion weather coat paint of Apex (Asian Paint) / Weather coat (Berger) / Excel Top Guard (Nerolac) complete all as specified and directed. |
| 15 | M&L for preparation of old painted surfaces of walls by washing, rubbing down & stopping etc, and applying one coat of plastic emulsion paintinterior quality of any tint / shade all as specified. |
| 16 | Demolition of cement concrete in ground floor and pavings not exc 15cm thickness below or above ground level, including removal of debries |
| 17 | Demolition of brick work or stone / boulder masonry built in cement mortar or cement lime mortar including all quions, arches, pillars etc but excluding ashlar facings, dressed stone work and pre cast concrete articles all as directed. |
| 18 | M&L for Brick work with Fly ash brick designation 100 Kg / Sqcm, straight or curved on plan exc 6 m mean radius built in cement mortar 1:6, using bricks of size 230 mm x 110 mm x 70 mm confirming to IS 12894, complete all as specified and as directed by Engineer-in-Charge. |
| 19 | M&L for PCC 1:2:4 type B1 using 20 mm graded stone aggregate as in coping, chajja, facia and the like including weathering, slightly rounded or chamfered angles with & inclnecessary use and waste of form work for fair faces of concrete complete. |
| 20 | Supply only integral water proofing compound powder ISI marked |
| 21 | Taking up or down 15 mm bore steel tubing and connections, from walls, floors or ceiling etc complete all as specified and as directed by Engineer-in-Charge. |
| 22 | Taking up or down 20 mm bore steel tubing and connections, from walls, floors or ceiling etc complete all as specified and as directed by Engineer-in-Charge. |
| 23 | Refixing old steel tubing and connections in new or old position on walls, ceiling or floors etc of size 15 mm bore after cleaning including provn of new fittings all as directed by Engineer-in-Charge (using old steel tubing retrived from item No 23 above). |
| 24 | Refixing old steel tubing and connections in new or old position on walls, ceiling or floors etc of size 20 mm bore after cleaning including provn of new fittings all as directed by Engineer-in-Charge (using old steel tubing retrived from item No 24 above). |
| 25 | M&L for 15 mm nominal boreMild steel galvanised water tubing , medium grade , with all fittings and fixed complete to walls and ceiling or laid in floors complete all as specified. |
| 26 | M&L for 20 mm nominal boreMild steel galvanised water tubing , medium grade , with all fittings and fixed complete to walls and ceiling or laid in floors complete all as specified. |
| 27 | Disconnecting existing tanks, setting aside (or lowering if required) for repairs, and inclcleaning and removing all scale and dirt, etc from tank and from mouths of circulating pipe etc and hoistingreconnecting and re-fixing in position capacity of tank exc 250 & n exc 500 litres all as specified. |
| 28 | Disconnecting existing tanks, setting aside (or lowering if required) for repairs,and inclcleaning and removing all scale and dirt, etc from tank and from mouths of circulating pipe etc and hoistingreconnecting and re-fixing in position capacity of tank exc 500 & n exc 1000 litres all as specified. |
| 29 | Dismantling of wall and ceiling boards (fiber, pulp, insulation, etc) or insulation boards/slabs/blankets, any thickness, including cover fillets. |
| 30 | M&L forPVC Wall panelling / Lining consisting of 5 mm thick Plain / wood colour PVC sheet as approved inclusive of solvent cement and fixing at site on PVC frame including complete fixing arrangments on wall complete all as per manufactures specifications. |
| 31 | M&L for Providing and fixing of E-board of size 600 mm x 600 mm x 4 mm thick white prelaminated seif embosed reinforced designer ceiling board tiles of approved texture at all height laid on and including snap grid of Hot dipped Galvanised iron imposed grid with 24 mm wide T-section / Angle section. |
| 32 | M&L for Suspended ceiling, comprising 12.5 mm thickreinforced gypsum plaster boardsConforming to IS-2095 , GI perimeter channels, intermdiate channels, etc. including finishing the exposed surfaces with Oil bound distemper two coatscomplete all as specified. |
| 33 | S&Fin repairgalvanised mild steel wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.18 mm in steel window clips and wooden beading in wooden joinery complete all as specified and directed. |
| 34 | S & F in repair for 150 mm floor door stopper of aluminium alloy body and tonge,anodised with hard drawn steel spring |
| 35 | Hacking out old broken glass, any thickness, size, quality, or description, from frame |
| 36 | S&F 3.0 mm thick sheet glass ordinary quality and glazing with oil putty n exc 0.5 Sqm each pane. |
| 37 | S&F 3.0 mm thick figured glass ordinary quality and glazing with oil putty n.exc 0.5 Sqm each pane. |
| 38 | S&F 4.8 mm thick sheet glass odinary qulity and glazing with neosprene beading n.exc 0.5 Sqm in each pane |
| 39 | M&L for Repairing of existing aluminium door single / double leaf (area of each leaf exc 1 Sqm but n.exc 2.0 Sqm) by taking down tightening of joint, tightening of top & bottom patch, replacement of cleat, screw, oiling and greasing of floor springs, & refixing in same opening for smooth functioningcomplete all as specified. Note:- Floor door springs where renewed shall be measured and paid separately under appropriate item of BOQ. |
| 40 | M&L for Repairing of existingtoughened glass door single leaf (area of each leaf exc 1 Sqm but n.exc 2.0 Sqm) by taking down tightening of joint, tightening of top & bottom patch, oiling and greasing of floor springs, & refixing in same opening for smooth functioningcomplete all as specified. Note:- Floor door springs where renewed shall be measured and paid separately under appropriate item of BOQ. |
| 41 | Supply & fixing in repair Double actionfloor spring hydraulically regu-lated made up of minimum 1.25 mm thick alu-minium alloysheet foun-dation box,main body with stainless steel cover, governing pivot made of mild steel heavy duty fixed. |
| 42 | S&Fin repairs Aluminium body ( extruded section ) body Door closer hydraulically regulated, designation No. 2 , universal type , suitable for door shutters 701 to 850 mm in width and ofweight between 36 to 60 Kg and fixed |
| 43 | S&F in repairfor 100 mm mild steel 4 lever mortice lock vertical type of size of brass body |
| 44 | S&F aluminium partition fabricated with aluminium powder coated (minimum thickness of powder coating 50 micron) section for side & top rail of size 101 mm x 44 mm x 2.5 mm for middle rail (horizontal / vertical) of size 101 mm x 44 mm x 2.5 mm, partly glazed with 5 mm thick frosted glass and partly paneled with 9 mm thick prelaminated particle board interiar grade with one side decorative lamination including glazing clip, rubber bead, fixed in position as per standerd practice including taking down old aluminium partition complete all as directed by the Engineer-in-Charge. |
| 45 | S&F aluminium partition fabricated with aluminium powder coated (minimum thickness of powder coating 50 micron) section for side & top rail of size 101 mm x 44 mm x 2.5 mm for middle rail (horizontal / vertical) of size 101 mm x 44 mm x 2.5 mm, partly glazed with 5 mm thick frosted glass and partly paneled with 3 mm thick aluminium camposit pannel including glazing clip, rubber bead, fixed in position as per standerd practice including taking down old aluminium partition complete all as directed by the Engineer-in-Charge. |
| 46 | S&F in repair Anodised Aluminium alloy sections sliding windows shutters with frames comprisingSeries -C (20mm), 2 track sliding shuttersduly fitted with neoprenebeading, glazing clips, locking device, heat absorbing glass 4.8 mm nominal thicknes complete all as specified and as directed |
| 47 | S&F in repair Anodised Aluminium alloy sections sliding windows shutters with frames comprisingSeries -C (20mm), 3 track sliding shutters duly fitted with neoprenebeading, glazing clips,locking device, heat absorbing glass 4.8 mm nominal thicknes in 2 shutters and 0.46mm dia SS wiremesh in one shutter complete all as specified and as directed |
| 48 | S&F in repair aluminium sections (conforming to IS) door with frame of size 100 mm x 44.45 mm wide fabricated with 2 mm thick section, double leaf shutter with 44.45mm wide fabricated with 2mm thick section having vertical and toprail 83.50mm, bottom rail and middle rail 115mm and including necessary jointing cleats, screws,neosprene rubber beading, PVC packing, tinted glass panes 4.8 mm nominal thickness complete all as specified and as directed. |
| 49 | Dismantling of roof sheet (any descriptions) including ridges in roof covering all as specified and directed. |
| 50 | S&F 0.50 mm thick Pre- painted Galvalume aluminum zinc coating GI based corrugated steel sheet of any colour having tensile strength of 550 Mpa as in roof covering / cladding to wall or roof, fixed with self drilling / tapping screws as specified and as directed by Engineer-in-charge. |
| 51 | S&F 2 mm thick fibre glass reinforced transclucent corrugated sheeting with two corrugations side lap fixed with L type or J- type or cranked hook boltsand washers in roof, wall etc complete. |
| 52 | M&L for providing cement concrete type B-1,1:2:4 (20 mm graded aggregate ) asin roof kerbs / padding or similar work or mud stops rounded or chamferred on edges. |
| 53 | Taking down cement plaster on brick wall, racking out joints hacking for key scrubbing down with water all as specified and directed. |
| 54 | M&L for acrylic polymer-modified cementitious high performance coating (two component) with high solid content and can be used for both side waterproofing due to its excellent bonding, good waterproofing and unmatched resistance to hydrostatic pressure which resist up to 5 bars of positive hydrostatic pressure and form highly elastic film which provides elengation up to 100 as per manufactures instructions complete all as directed. (Product of Asian paint or equivalent) (Note:- Work to be carried out by the authorised applicators of manufactures only) |
| 55 | M&L for Rendering 15 mm thick in cement and sand mortar 1:4 onbrick work or cement concrete wall surfaces including mixing only water proofing compound as per manufacturers instruction and finishing the surface even and smooth without using extra cementcomplete all as specified. Note:- Waterproofing compound will be measured and paid seperatly. |
| 56 | M&L for Rendering 10 mm thick in cement and sand mortar 1:6 onbrick work or cement concrete wall surfaces including finishing the surface even and smooth without using extra cementcomplete all as specified. |
| 57 | M&L for 5 mm thick rendering in cement mortar 1:3 on concrete surface of ceiling, finished even and smooth without using extra cement. |
| 58 | M & L applying three coat of white wash on new plastered or unplastered wall surfaces including preparation ofsurfaces, complete all as specified. |
| 59 | M&L for preparation of newly plastered surfaces of walls including sides and soffits ofbeams, fascias, parapets etc and applyingtwo coats of cement base paint over one coat of primer, colour andtint as ordered, complete all as specified and directed by Engineer-in-Charge. |
| 60 | M&L for preparation of new plastered surfaces of walls and applying two coats of oil bound distemper over one coat of primer over and including 3 mm thick cement base wall care putty complete all as specified and directed by Engineer-in-charge. |
| 61 | M&L for half brick thick wall with Fly ash brick designation 100 Kg / Sqcm using bricks of size 230 mm x 110 mm x 70 mm confirming to IS 12894, straight or curved of on plan to any radius built in CM 1:4 complete all as specified. |
| 62 | Demolition of floor, hearth or wall tiling or stone slab laid, bedded & pointed in any mortar including demolition of cement mortar bedding or backing coat, including removal of debries from site. |
| 63 | M&L for non skid ceramic tiles 7-8 mm thick (square or rectangular) polished area of each tile exceeding 0.11 sqm but n.exc 0.18 sqm as in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match coloured tiles over and including 15 mm thick screed in CM 1:6 complete all as specified and directed by Engineer-in-Charge Note : Quoted rate shall be deemed to include cast of screed bed. |
| 64 | M&L for for coloured glazed ceramic tiles in vertical surfaces of size 450 x 300 x 7-8 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match the tiles, over and including 10 mm thick backing coat in CM 1:3 complete all as specified and directed by Engineer-in-Charge. Note : Quoted rate shall be deemed to include cast of backing coat. |
| 65 | M&L for 100 mm thick cement concrete 1:4:8, type D-2, using 40 mm graded stone aggregate,as in Sub base / path / flooring complete all as specified and as directed. |
| 66 | M&L for 40 mm thick cement concrete 1:2:4, type B1, using 20 mm graded stone aggregate,as in floor, finished the surface even & smooth without using extra cement complete all as specified and as directed. |
| 67 | M&L for 60 mm thick factory made chamfered edge cement concrete interlocking paver block of M-35 grade, in gray cement with approved design & pattern / shape laid as in foot path, / hard standing / drive ways or parking etc., made by table vibratory method using PU mould, laid over and including 50 mm thick compacted bed of fine sand, compacting and proper embedding / laying of inter locking paver blocks over the the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand; complete all as specified and directed. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
