Military Engineer Services-MES has published Tender For Special Repair To Bldg. No P-14 And Provn Of Stand By Power Supply At Af Stn Gorakhpur. Submission Date for this Tender is 09-05-2024. Building Work Tenders in gorakhpur Uttar Pradesh. Bidders can get complete Tender details and download the document.
| FileName | File Description | File Size |
| d51b8925-8e71-49fc-bf87-e4da3eb5fc29.html | Tender Notice | 0 KB |
| BOQ_728655.xls | Tender Document | 0 KB |
| TenderCA68FourthCall.pdf | Tender Document | 0 KB |
| Tendernotice_1.pdf | Tender Document | 0 KB |
| Sl. No. | Item Description |
| 1 | Taking down cement or lime plaster any description on brick or stone walls etc including recking out joints hacking for key scrubbing down with waters, complete all as specified as directed. |
| 2 | Rendering 15mm thick in cement mortar 1:6 on faces of brick work or concrete surfaces, finished even and smooth without using extra cement, complete all as specified as directed. |
| 3 | M&L for 15 mm thickcement plasterin cement mortor1:4mixed with WPC @ 150 ml per bag of cement or as per manufacturer instructionfinished the surface even and smoothwithout using extra cement, complete all as specified and directed. ( Note: WPC will be measured and paid separately) |
| 4 | M&L rendering 5mm thick 1:3 CM on fair face of concrete surface on ceiling finished evenand smooth without using extra cement, complete all as specified as directed. |
| 5 | Supply only liquid water proofing compound complete all as specified and directed. |
| 6 | Preparation ofnew plaster surfaces of wall and applying two coats of distemper oil emultion over a coat of primer with 1coat of putty, complete all as specified as directed. |
| 7 | M&L for preparation of newly plastered of surface and three coat of white wash on ceilingsurface incl complete, complete all as specified as directed. |
| 8 | M&L for complete removal of existing treatment from surface of wall and applying two coat of oil bound distemper by using roller and a coat of primer over a coat of 1mm thick Birla puttyas base coat complete all as specified and directed. |
| 9 | M&L for preparation of surface and two coat of white wash on old ceilingsurface incl, complete all as specified as directed. |
| 10 | Preparation ofnew plaster surfaces of wall and applying two coats of cement base paintover a coat of primer/putty, complete all as specified as directed. |
| 11 | M&L for complete removal of existing treatment from surface of wall and applying two coat of cement base paint and a coat of primer over complete all as specified and directed. |
| 12 | Demolition of cement concrete (unreinforced) of any description and any position not otherwise specifically provided for, complete all as specified as directed. |
| 13 | M&L 75mm thick PCC type B-1, (1:2:4) using 20mm graded stone aggregate in Sub base, hard standing , plinth protection etc finished the surface even & smooth without using extra cement, complete all as specified as directed. |
| 14 | M&L for PCC (1:4:8) type C-2, (using 40mm graded stone aggregate) as in foundation, mass fillings,sub baseetc. complete all as specified & directed. |
| 15 | M&L for precast designer chequered tilesrubber moulded (factory made rectified ) of sizetiles 300mX300mmX25mm,top layer glazed made in any type of cement and pigment in required patterns(compressive strength not less than250 kg per Sqm) including 20 mm 1:6 Screed bed, complete all as specified as directed. |
| 16 | M & L for PCC 1:2:4 type B1 (Using 20 mm graded aggr) as in coping and similar works incl necessary from work, complete all as specified as directed. |
| 17 | M&L PCC 1:3:6 type C-2 (using 40mm graded stone aggregate ) in surface chanel and drain, complete all as specified as directed. |
| 18 | M&L Demolition of brickwork and portions orderedto be dismantled built in cement mortar or cement lime mortar complete all as specified as directed. |
| 19 | M&L Brick work with sub class B bricks straight or curved on plan exc 6m mean radius built in CM 1:4, complete all as specified as directed. |
| 20 | Taking up or down steel tubing and connections 15mm bore, complete all as specified as directed. |
| 21 | S&F steel water tubing `medium grade’ galvanized 15 mm bore with all fittings and fixed complete to walls and ceiling concealed and joints fixed with adhesive, complete all as specified & directed. |
| 22 | Taking up or down steel tubing and connections 20mm bore, complete all as specified as directed. |
| 23 | S&F steel water tubing `medium grade’ galvanized 20 mm bore with all fittings and fixed complete to walls and ceiling concealed and joints fixed with adhesive, complete all as specified & directed. |
| 24 | S&Fin repairrotantional moulded polythylene water storage tanks 500 ltr capacity(cylindrical vertical with closedtop ) hoisted and fixed in position, complete all as specified as directed. |
| 25 | S&F in repair 20 mm dia gun - metal globe or gate valves with iron wheel head ,screwed both ends for iron pipe and fixed, complete all as specified as directed. |
| 26 | S&F in repair vitreous chainasquating pan orissa pattern size 580X 440mmwhite with intregal foot rest complete including lime concrete(excl flushing cistern and flush pipe) but connecting to flushing pipe, anti-symphonage pipe etc complete fixed in repair, complete all as specified as directed. |
| 27 | S&F in repairs 10 Litre capacity PVC low level flushing cistern with ball valve and handle/push button 32mm dia PVC flush pipe including taking down unserviceablecistern, complete all as specified and directed. |
| 28 | S&F vitreous china wash basin white flatAngle back size 5500mmx 400mm including brackets, brass chromium plated waste fittings and PVC waste pipe including cutting for and pinning in ends of bracket & waste pipe fixed in repairs, complete all as specified as directed. |
| 29 | S&F in repairsfor 15 mm bore swan neck pillar taps CP fancy type screwed down high pressure with longshanks and fly nuts screwed for iron pipe Hot or Cold with long screwed and fixed, complete all specified and directed. |
| 30 | S&F in repair brass chromium plated angle stop cock, of 15 mm bore, complete all as specified and directed. |
| 31 | S&F in repair CPbib taps fancy type CP alloy with crutch or butterfly handle screwed for iron pipe or for brass ferrule, of fixed 15mm dia, complete all as specified as directed. |
| 32 | S&F in repair Stop valves/concealed valve, cast copper alloy,screwed down, high pressure, with crutch or butterfly handle,screwed both ends for iron pipe or for unions and fixed, complete all as specified as directed. |
| 33 | S&F in repairs CP Grating doom 125 mm dia with waste hole, complete all as specified as directed. |
| 34 | S&Fin repairs mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers, complete all as specified as directed. |
| 35 | S&F in repair Stainless steel kitchen plate rack of size 600x900x250 of best quality ISI markedmade out of 1.0 mm thickStainless steel fixed with Nails, complete all as specified and directed. |
| 36 | S&F in repair sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 915mmx460mm bowl size 410mmx330mmx160mm, complete all as specified as directed. |
| 37 | M&L in repairs Towel Rail 450mm long of PTMT fixed with and including Chromium plated brassscrews and wooden/plastic cleats (Minimum weight 170gms), complete all as specified as directed. |
| 38 | S&F in repair chromium plated shower rose fixing with 15mm bore pipe min 40 grms including arm 15 mm size 195mm long with bend min wt 40 gms, complete all as specified as directed. |
| 39 | M&L in repairs Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long, complete all as specified as directed. |
| 40 | S&F in repairs PVC connections 450mm long, 15 mm size with brass chromium plated nuts at ends complete fixed in repair, complete all as specified and directed. |
| 41 | S& F in repair Soap dish, any type, fixed toplugs with chromium plated brass screws, complete all as specified as directed. |
| 42 | S&F Bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required hooks (stay), heavy, for large gates; hook and pintle hinges large hasps and staples; chains; hand made sliding bolts; clamps hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe-290 Gde-E-165, complete all as specified as directed. |
| 43 | S&F PVC (SWR)P/S/ gully trap 125/110 mm, setting and jointing with solventcement, complete all as specified as directed. |
| 44 | M&L 75mm dia PVC (SWR) floortrap, plane with grating including jointing with solvent cement, complete all as specified as directed. |
| 45 | S&F in repairs PVC (SWR) pipes 75mm bore single socketed, in any length with rubber ring joints, laid in trenches or in floors, complete all as specified and directed |
| 46 | S&F 75mm PVC (SWR) bends anyradius, complete all as specified as directed. |
| 47 | M&L in repairs PVC waste pipe 40mm dia for sink ISI marked, complete all as specified as directed. |
| 48 | M&L in repairs PVC waste pipe 32mm dia for wash basin ISI marked, complete all as specified as directed. |
| 49 | Taking downeaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc., including cleaning or refixing or removal to Store (measured overall as fixed along the centre line over fittings and accessories), complete all as specified as directed. |
| 50 | S&F 110mm PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors, complete all as specified as directed. |
| 51 | S&F 110mm PVC (SWR) bends any radius, complete all as specified as directed. |
| 52 | S & F in Repair 110 mm PVC (SWR) vent cowl, complete all as specified as directed. |
| 53 | S &F in repair 100 mm Cast iron soil, waste and vent pipes in any length with or without ears, with cement joints, in any position, complete all as specified as directed. |
| 54 | S &F in repair 75 mm Cast iron soil, waste and vent pipes in any length with or without ears, with cement joints, in any position, complete all as specified as directed. |
| 55 | S& F in Repair 100 mm cost iron Bends (any radius) with duck"s foot or heel rest, complete all as specified as directed. |
| 56 | S& F in Repair 75 mm cost iron Bends (any radius) with duck"s foot or heel rest, complete all as specified as directed. |
| 57 | S& F in Repair 100 mm cost ironBranch pieces, single (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branches, complete all as specified as directed. |
| 58 | Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth;and getting out any type of soil, complete all as specified as directed. |
| 59 | Returning, filling in, including spreading, levelling, watering and well ramming in layers n.exc 25 Cm, complete all as specified as directed. |
| 60 | Removing surplus excavate soil to a distance exc. 250 m but n exc. 500 m and depositing where directed at a level not exc 1.5m above the starting point, complete all as specified as directed. |
| 61 | Demolition and breaking up150mm dia RCC Pipe/ salt glazedstone ware drain pipesjointed incement mortarand taking out oftrenches removing the debriesfrom site, complete all as specified as directed. |
| 62 | S&FReinforced conctrete150mm bore of pipes class NP2, laid and jointed complete with collars, complete all as specified as directed. |
| 63 | M&Lfor PCC (1:4:8)type D2 ( using40mm graded stone aggregate ) as inthe drain pipe incl packing under & haunchingagainst the side of pipe after they are laid and tested for 150mm dia, complete all as specified as directed. |
| 64 | M&LPrecast cement concrete 1:2:4, type B1 (Using 20 mm graded granite stone aggregate) in landings, cover slabs (for manholes etc.) shelves and similar articles with plain faces and set in cement mortar 1:4, complete all as specified as directed. |
| 65 | Material and labour for treating the sunken floor with preparing surfaces by brushing with wire brushes for removing caked mud etc sweeping with brooms and finally fanning the cleaned surface with funny bags to remove all loose dirt etc, applying consisting of the following operation:- (a) 10mm thick plaster/screed bed in cement mortar 1:3 complete mixed with liquid water proofing compound as per manufactures instructions complete all as specified & directed (Note - WPC shall be measured and paid separately). (b) Cleaning floor surface by wire brush brooming & removing dust & shall be painted with a coat of bituminous primer conforming to IS : 3384-1986 @ 0.3 Ltr per Sqm uniformily complete all as specified & directed. (c) After primer the entire roof surface applying tack coat of hot blown bitumen grade 85/25 grade conforming to 702-1988 @ 1.2 Kg per sqm over primer. (d) Over hot bitumen laying polymeric water proofing membrance conisting of 90 to 100 micron thick center core of HMHDPE Film with standard weight not less than 3 Kg per Sqm over entire area laid with 100mm side lap/end lap on prepared surfaces as per manufacture"s technical instruction & sealed complete all as specified & directed. (e) Again the entire floor surface applying tack coat of hot blown bitumen grade 85/25 grade conforming to IS 702 @ 1.2 Kg per sqm. |
| 66 | M&L in repairs 40 mm tube galvanised iron light grade cut to required size as per site requirement to be placed in sunken portion of toilet/bathroom and taking out old pipe, complete all as specified as directed. |
| 67 | Material and labour PCC in foundation filling and mass concrete type E-2, 1:5:10,using 40mm graded aggregate, complete all as specified as directed. |
| 68 | M&L25 mm thickplain cement concrete 1:2:4 type B-1 ( using 12.50 mm graded stone aggregate) as in sub bases of floors finished even and fair, complete all as specified as directed. |
| 69 | Dismantling/Demolition /striping out of existing roof treatment (terfelt and roof plaster etc) including PCC padding of any discription and any thikness including backing and removal the debris, complite all asspecified and directed. |
| 70 | M&L Wire brusing & cleaning top surface of Concrete, lime terracing or cement concrete, including flashings & junction of parapets, etc. complete all as specified and directed. |
| 71 | M&L for40 mm thick PCC roof padding 1:2:4 type B-0, 12.5 mm graded stone aggregate in floors , finished smooth .complete as specified and directed. |
| 72 | M&L for 10 mm thick screed bed or bedding layer of mortar in CM 1:3,using Liquid Water Proofing Compound as per manufacturer"s instruction, laid in roof finisshed even and smoooth without using extra cement (WPC shall be paid separately), complete all as specified as directed. |
| 73 | M&L PCC in roof kerbs of mud stops, rounded or chamfered on edges and base of Over head tanktype B1 (1:2:4) using 20 mm graded aggregate complete all as specified and directed. |
| 74 | M&L for water proofing treatment to flat roofs and edges (vertical or tapered) etc. in following sequence:-(i) Properly cleaning and drying the surface (ii) Applying a coat of bitumen primer @ 0.25 Kg/Sqm (iii) Applying a coat of hot air blown grade bitumen 85/25 @ 1.2 Kg/Sqm (iv) Laying 3mm thick APP modified water proofing membrane with 100mm overlaps, sealed and bonded to the surface by "torchon" method as per manufacturer"s instructions complete all as specified and directed. |
| 75 | M&L20Cmx20cm x20mm Concrete tile with 20 mm Screed1:4 bed mix with 5% of liquid WPC included WPC qty measure Seperated, complete all as specified and directed. |
| 76 | Demolition of concrete of any description and in any position not other wise specifically provided for cement concrete reinforced including roof padding, Rcc Tank etc, complete all as specified and directed. |
| 77 | M&L for RCC1:2:4 type B0 using 12.5mm graded stone aggregate as in chajja, fins, fascia and similar suspended work in bld upto 6M height incl use and waste of necessary formwork and scaffolding required, complete all as specified as directed. |
| 78 | M&L for providing pre-cast RCC lintel ,shelves etctype B-1 ,1:2:4 using 20 mm graded stone aggregate and set in cement mortar in 1:4for door and window opening including use and waste of form work, complete all as specified as directed. |
| 79 | M&L Mild steel TMT bars 6 mm to 8 mm dia., cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia., or securing with clips quality confirming to Fe-410-S 0r Fe-410-O, complete all as specified as directed. |
| 80 | M&L for demolition of stone slabs and tiles of any description or thickness in floors, aprons etc.laidbeddedand pointed in any mortar, complete all as specified as directed. |
| 81 | S&F 18-20 mm Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, win dow-cills, cooking plat forms and like 20 mmcement mortar (1:4) including point ing in white cement (1:2) us ing marble dust with admix ture of pigment to match with shade of granite, complete all as specified as directed. |
| 82 | M&Lfor machine cut Pre Polished Kota stone slab 18 to 20mm thick in single piece in stair case as in flooring, laid over and including cement screed bed 20 mm thick in cement mortar 1:4, and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and granite polishing, complete all as specified as directed. |
| 83 | M&L for machine cut pre polished Kota stone slab 18 to 20mm in thick single piece in stair case as in skirting/ dado or on vertical surfaces laid over and including cement screed bed 10 mm thick in cement mortar 1:4, and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and granite polishing, complete all as specified as directed. |
| 84 | M&L Rounding to edges of stone slabs one edge, such as in steps,cooking platform, and other similar situations, complete all as specified as directed. |
| 85 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises, complete all as specified as directed. |
| 86 | S&FNon - skid coloured Ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over 15 mm thick screed bed in cm 1:6 etc, complete all as specified as directed. |
| 87 | Ditto but as in skirting over 10 mm thick cement morter in 1:4, complete all as specified as directed. |
| 88 | S&Fjoint free non skid coloured ceramic tiles 7 to 8mm thick(square / rectangular ) area of each tile n.exceeding 0.11 sqm, in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over 15 mm thick screed bed in cm 1:6 etc, complete all as specified as directed. |
| 89 | S&F Glazed ceramic coloured tiles300x450x7mm thick in skirting dados risers to steps etc set and jointed in neat cement slurry and pointed in coloured cement to match tiles over 15mm thick rcement plaster in cm 1:4 complete all as specified as directed. |
| 90 | Taking down chowkats or frame not exc 1.5 sqm with shutter (with out taking of shutter from frame) all as specified and remooving from site, complete all as specified as directed. |
| 91 | Dittobut exe 1.5sqm and n.exe 4 sqm, complete all as specified as directed. |
| 92 | S & F Pressed steel frames for doors of size 105 x 60mm with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete all as specified as directed. |
| 93 | S & F Pressed steel frames for doors of size 125 x 60mmwith one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc. , complete all as specified as directed. |
| 94 | S/F 2nd class hard wood plain , solid straight chowkats and frames , wrought framed rebated on the solid rounded or chamfered put together with glue pinned at joints, complete all as specified as directed. |
| 95 | M&L forPCC 1:3:6 type C1 as in hold fast blocksand filling in pressed steel frame incl. Necessary form work, complete all as specified as directed. |
| 96 | S&F 35mm thick factory made plain framed, panelled shutter(two panel) with lock rail and panel of 9mm B.W.P commercial ply or 12mmveneeredparticle board with commercial veneering on both faces. The size of rail and stile as per IS: 1003(part I), kilm seasoned and chemically pressure treated, complete all as specified as directed. |
| 97 | S&F for second class hardwood glazed and skeleton door shutters 35mm thick, open rebated and prepared to receive glass, gauze etc (without sash bars) edges of framing plain, chamfered or rounded fitted with cut and mitred beads for securing glass, etc complete all as specified and directed. |
| 98 | S& Fin repairPrelaminated particle board 18/19mm thick, exterior grade, prelaminated one side with decorative choice lasmination & other side balancing white lamination in pelmet boxes,cup board shutters etc, rebated or flat edged fixed in repairs, complete all as specified and directed. |
| 99 | S&F solid PVC door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, supplying and fixing in openingas per specification & drawing, complete all as specified and directed. |
| 100 | S&F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails. MS frame shall be covered with heat moulded plain colour PVC "C" channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail. Panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement, supplying & fixing in the frame at site as per specification & Drg, complete all as specified and directed. |
| 101 | M & L powder coated anodised aluminium(sliding/hanging type) windows/ventilator with three track bottom track size 92 X 29.5 X 2mm thick, side & top track frame size92 X 29.5 X 2mm thickand shutter aluminium anodised 39 X 20 X 2 mm thick incl necessary aluminium fittings likejointing cleats, glazing cleats, rubber packing, anodised aluminium snap beading, screws etc with 5mm thick tinted/plain glass inpanels and stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40 mm incl all fittings & fixture, complete all as specified and directed. |
| 102 | S&F 18 mm thick Rajshri PVC Celuka ply of grade1 quality (or equivalent PVC ply of other make as approved by GE) of both side prelem fixed with screws, solvent cement/adhesive to make cupboard shutter sides top and bottom, shelves inside the cabinet and shutter or drawer, complete all as specified and directed. |
| 103 | M&L made PVC shelf/partition of required size consisting of panel of 18 mm thick Celuka PVC ply of make Rajshree (or equivalent PVC ply of other make as approved by GE) and supporting the shelf/partition and shall provide with PVC runners in thee sides of shelf size 18x18mm as per required length. The front side of the edge visible in the front of the shelf/partition to be edgelipped by 18mm with 1 mm thick PVC sheet of density 600 kg/Cum density manufactured by an ISO-9000 certified company, using solvent cement etc complete all as specified and directed. |
| 104 | S&F75 mm size L/Z type stainless hinges fixed screws openable at 110 degree for cabinet shutter Make- KAFF, complete all as specified and directed. |
| 105 | S&F stainless steel handles of 100 mm size for kitchen cabinet shutter, complete all as specified and directed. |
| 106 | S&F 75mm Hasp and staple, aluminium anodised, wire type, stove enamelled black, including bolt to hinge plate and fixed with screws, complete all as specified and directed. |
| 107 | S&Fstainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40 mm fixed with tinned tacks or stainless steel wire staples, complete all as specified and directed. |
| 108 | S&F in repaircurtain rod (Dropery rod) stainless steel curtain rods 20 mm dia including end Knobs fancy type nickle polished golden or silve colour as per sample, complete all as specified as directed. |
| 109 | S&F in repairs fancy type bracketsfor fixing of 20mm dia dropery rod complete all as specified and directed. |
| 110 | S&F in repairs Cloth rod with caps and brackets 15 mm diacomplete all as specified and directed. |
| 111 | Dismantling wrought iron or mild steel work of any description not otherwise provided forwindows grill etc., complete all as specified and directed. |
| 112 | S&F framed work such as grills, gratings etc, with ends of bars shouldered and / or riveted, or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusteres, walk ways, railings, frame work of water tanks and similar work complete all as specified and directed. |
| 113 | S&F 2nd class hardwood small fittings such as brackets of any type of door and window stopper including all necessary articlesn exc 200 cu. cm each each, complete all as specified and directed. |
| 114 | M&L preparation of new wooden surface any description not otherwise described and exc 10cm width or girth applying two coats of synthetic enamel paint over a coat of pink primer, complete all as specified and directed. |
| 115 | M&L Preparing old surfaces of any description and applying one coat of synthetic enemal paint over 10cm width or girth, complete all as specified and directed. |
| 116 | S&F 75 mm size butt hinges medium weight cold rolled milled steel, complete all as specified and directed. |
| 117 | S&F 100mm size butt hinges medium weight cold rolled milled, complete all as specified and directed. |
| 118 | S&F 200mm long aluminium anodised barrel tower bolt of extruded section , complete all as specified and directed. |
| 119 | Ditto, but 150mm long, complete all as specified and directed. |
| 120 | S&F 300 mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed, complete all as specified and directed. |
| 121 | M&L for 125mm size Aluminium handle cast type anodiesd in repair complete all as specified as directed. |
| 122 | Detto but 150mm size, complete all as specified and directed. |
| 123 | M/L preparing newsteel surfaces of any description over 10cm width or girth and applying two coat of synthetic enamel paint over a coat off red oxide primer, complete all as specified and directed. |
| 124 | M/L preparing old painted steel surfaces of any description over 10cm width or girth and applying one coat of synthetic enamel paint, complete all as specified and directed. |
| 125 | M&LProviding precast cement concrete louvres Type B0 1:2:4 (12.5mm stone agg)Set in cement mortar 1:4 and jallies, 25mm thick (measured solid), including all mould- ings but excluding frame (Pre cast frame shall be measured separately and paid for under item 04032) ®, complete all as specified and directed. |
| 126 | M&L Providing and injecting chemical emulsion for Post Constructional Antitermite Treatment along external wall where the apron is not ovided using chemical emulsion at the rate of 7.5 litres per sq.m of the vertical surface of the sub-structure to a depth of 300mm including excavating channel along the wall and rodding etc., complete all as specified and directed. |
| 127 | M&L Providing ATT and injecting chemical emulsion for Post Constructional Antitermite Treatment Along the external wall below concrete or masonry apron using chemical emulsion @ 2.25 litres per linear metre including drilling and plugging holes etc. in apron, complete all as specified and directed. |
| 128 | Supply and fix in repair mild steel helical door spring rat tail rod model including roller plate complete300 mm long, complete all as specified and directed. |
| 129 | Taking down carefully copper/aluminium point wiring (light, fan, socket, bell or power) completeincluding all electrical fittings & fixtures(DBs, submain,cables etc) and making good disturbed surfaces of wall , floor etc and matching wth original colour of wall, complete all as specified & directed. |
| 130 | M&L for one light/fan/exhaust fan point wiring controlled by one switch with PVC insulated unsheathedmulti stranded copper conductor (FRLS) of size 1.5 Sqmm (for Phase colour code Red and for Neutral colour code Black) and one run of size 1.5 Sqmm PVC insulated unsheathedmulti stranded copper conductor (FRLS) (as earth wire, colour code green) and connected to common earth dolly all as specified. , drawn through in and including concealed PVC Conduit medium grade, ISI marked not less than 19.5 mm / 20 mm dia along with conduit fixing accessories and with pressed steel terminal box for mounting of switch socketof thickness1.6 mm thick terminal boxes concealed on wall/fllor/ceiling, with 3 mm thick laminated sheet top cover ISI marked. Make: Hylum for fixing of switches/socket/regulator with brass screws cup washer complete including making good of disturbed surfaces of wall/ceiling/floor in same specification as per existing one and white wash/colour wash, complete all as specified & directed. |
| 131 | All as per item No 130 above but 5 Amp socket outlet, independent, complete all as specified & directed. |
| 132 | All as per item No 130 above but on the same board, complete all as specified & directed. |
| 133 | All as per item No 130 above but for one bell/Buzzer point controlled by one push button on the same board with other switches or independent with 1.50 sqmm size cable, complete all as specified & directed. |
| 134 | All as per item No 130 above but for one light point controlled by two, 2- way switch, complete all as specified & directed. |
| 135 | All as per item No 130 above but 2.5 sq mm wire for one 15 Amps socket outlet independent with continuous PVC insulated single core green colour copper earth wire of size 1.5 sq mm connected to common earth dolly. |
| 136 | S&F switch piano flush type 5 Amp one way, single pole, 240 volts, complete all as specified & directed. |
| 137 | S&F switch pianotype 5 Amp, 2 way,240 volts, complete all as specified & directed. |
| 138 | S&Fin repairs socket outlet 5 Amp, 5 Pin, 240 volt, flush type, complete all as specified & directed. |
| 139 | S&F in repairs bell push piano type, single pole 1 way 240 volt, complete all as specified & directed. |
| 140 | S&F in repair call bell , ding dong /musical,single phase 230 volts, complete all as specified & directed. |
| 141 | S&Fin repairs switch socket outlet, two in one 5& 15 Amp, 6 pin, multipurpose combination, complete all as specified & directed. |
| 142 | S&F ceiling rose, 3 phase/PVC/polycarbonate, isolated body three terminals, complete all as specified & directed. |
| 143 | S&Fixing in replacement lamp holder bakelite with back plate suitablefor batten fittings, complete all as specified & directed. |
| 144 | S&F ceiling fan regulator electronic Stepped type for 1200/1400 mm sweep, complete all as specified & directed. Make:- Anchor/SSK/Bajaj. |
| 145 | Supply and fixing in repairs LED bulk head light fitting 10 Watt, complete all as specified & directed. Make:-HEXAT10LED857SSYMBOPC of Havells or equivalent. |
| 146 | Supply and fixing in repairs LED street light fitting 1 x 35/36 watt , water proof confirm to IP-65 including one number MS clamps made of 25x3 mm flat iron with bracket of GI pipe light grade 25 mm dia and length not less than 1.2 mtr end of GI pipe suitable for street light fitting. connecting with three core copper flexible wire 23/0.0076. Make -ENDURAPEALNEOSL48LED757PASYTOPC Of havells or equivalent, complete all as specified & directed. |
| 147 | Supply and fixing in repair LED lights fitting 1x 20W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose, complete all as specified & directed. |
| 148 | Supply and fixing in repair LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size, complete all as specified & directed. |
| 149 | Supply and fixing in repair round shape 6 watt 220 volts AC recessed type with high efficiency PMMA diffuser soft glare free light complete with drivers, holders, LED lamp suitable for roof ceiling including connecting up with three core flexible copper conductor cable of suitable size, complete all as specified & directed. |
| 150 | S&F in repair rechargeable Emergency Inverter LED batten 20W, 3 feet complete all as specified and directed. |
| 151 | Supply and fixing in repair LED Lamp 12W, 220V, AC, complete all as specified & directed. |
| 152 | Supply and fixing in repair factory made epoxy powder coated distribution board double doorTP & N 4 ways (VTPN MCB DB) with metal door (IP-43 protection) fabricated from minimum 1.6mm thick CRCA sheet and fixed flush to wall and suitable for universal mounting and including 200 Amps copper bus bar, neutral bar, strandard DIN rail, earth bar and cable ties for cable management, top and bottom removable gland plates with Knockoutsincluding one FP MCCB/MCB 100/ 63 Amps as incomer and 24 nosMCBs(or any combination of SP/TP MCBs ), outgoings complete all as specified & directed. |
| 153 | Supply and fixing as in repair MCB DB SPN (double door) 8 Ways including bus bar neutral link, earth bar and din rail, recessed with wall surfaces by chase cutting and making good surfaces of wall, complete all as specified & directed. |
| 154 | Supply and fixingin repair Single pole and neutral sheet metal enclosure with two pin and earth plug and socket complete with one single pole MCB 20 Amps, complete all as specified & directed. |
| 155 | Supply and Fixing in replacement MCB, single pole, 240 Volts, curve "C" of capacity (6-32 Amps) as ordered breaking capacity 10 KA, complete all as specified & directed. |
| 156 | Supply and fixing in repair MCB SPN, 40 to 63 Amps, 240 Volts, curve "C" ofbreaking capacity 10KA, complete all as specified & directed. |
| 157 | Taking down old and u/s sub main wiring of 2/3 runs of any sizes from any position including, making good disturbed surface of wall ceiling etc, complete all as specified & directed. |
| 158 | M&L for sub main wiring with PVC insulated unsheathed cable with copper conductor multi strand two single core 6 sqmm including 4 Sqmm PVC insulated green colour earth continuity wire drawn through in and including 25 mm dia PVC concealed conduit, complete all as specified & directed. |
| 159 | M&L for sub main wiring with PVC insulated unsheathed cable with copper conductor multi strand two single core 4 sqmm including 4 Sqmm PVC insulated green colour earth continuity wire drawn through in and including 25 mm dia PVC concealed conduit, complete all as specified & directed. |
| 160 | Taking down existing Single phase energy meter of any type and make from existing position without disturbing other connection and deposit the same to AGE E/M store yard after noting down the reading from meter and refixed in same positin after repair work is comleted, complete all as specified & directed. |
| 161 | Supply and fixing in repair Exhaust Fan 300 mm dia, metallic body ,Single Phase 230 Volts ACincluding lower shutter and all connection, complete all as specified & directed. Make: - Bajaj/Havells/Usha (old retreived fan will be deposited to EM store yard). |
| 162 | Supply and fixing in repair exhaust fan made of plastic body complete with louvers shutters, 300 mm sweep, single phase, 230 Volts AC, ISI marked fixed properly at directed location with provisioning of suitable fixing/tightening arrangements and connecting/testing andincluding writing MES No., complete all as specified & directed. (old retreived fan will be deposited to EM store yard). |
| 163 | M&L for cutting holes into or through brick walls built in in brick walls built, in cement mortar or cement lime mortar and stone walls built in lime mortar or walls of lime concrete for installation of Exhaust fans, complete all as specified & directed. |
| 164 | Taking down ceiling fan by unscrewing nut , bolts, disconnection of electric cable from ceiling rose, ceiling cable end,removing blades , of any sweep and make and deposit to MES Store, complete all as specified & directed. |
| 165 | Supply & Fixing ceiling fan 1200 mm sweep, BEE 5 star rated, ceiling fan with Brush less direct current (BLDC) motor, class of insulation : B, 3 nos. blades, 30 cm long down rod, 2 nos. canopies, shackle kit, safety rope, copper winding, power factor not less than 0.9, service Value ( CMM/W) minimum 6.00, Air delivery minimum 210 CMM 350 RPM ( tolerance as per IS : 374 - 2019), THD less than 10 % ,electronic regulator unit for speed control and all remaining accessories including safety pin, nut bolts, washers, temperature rise = 75 degree C (max), insulation resistance more than 2 mega ohm, suitable for 230 V , 50 Hz, single phase AC supply, earthing etc including necessary connection with ceiling rose with 3 core 1.0 Sqmm PVC insulated round flexible cable and including writing MES No. , complete all as specified & directed. |
| 166 | Supply and fixed in replacement of down rod with anti sucide safe fan down rod of 260 mm length suitable for fixing in existing ceiling fan complete with nuts bolts, check nut and washers including making holes by drilling for bolts complete all as specified and directed. Make Gold Life. Note:- (i) Anti sucide safe down rod will be active if load on fan exceeded 20.00Kg, then down rod pipe opens from middle and spring in pipe will expanded for landing smoothly of person trying to commit sucide. |
| 167 | Supply and fixing in repair water heater storage vertical type, puff insulation type of 25 ltrs capactiy and 1500 watts, BEE Star rated-5, with glass line inner shell with Hot & Cold pipe, water connection pipe, electric connection and necessary fixing arrangement andincluding writing MES No., complete all as specified & directed. (old retreived fan will be deposited to EM store yard). |
| 168 | Supplying and laying in repair ofTubes, "medium grade ", galvanised iron of size 15 mm dia bore, with all fitting(such as bends, elbows, tees, short pieces, connectors, backnuts, diminishing pieces, caps, plugs and unions, etc.) and fixing complete with clips, wall hooks, wooden plugs, or fixed to walls etc. including cutting, threading and screwing etc, complete all as specified & directed. |
| 169 | M&L in repairsBib taps in repairs chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed of size 15 mm dia, complete all as specified & directed. |
| 170 | M&L in repairsStop valves, in repairs fancy type chromium plated, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed of size 15 mm dia, complete all as specified & directed. |
| 171 | M&L in repairs PVC connections 15mm size with PTMT nuts of length 600 mm suitable for hot water supply, complete all as specified & directed. |
| 172 | M& L for Earthing complete with galvanised steel earth plate electrode 60×60cm.× 6mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less"than 1.5 metres below normal ground level, connected to galvanised earth lead wire 4.0mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No. 3 connected to earthing test point all as specified or indicated including testing on completion, complete all as specified & directed. |
| 173 | Supply, Installation, testing and commissioning of silent type Diesel engine driven generating set with Governing class G2 incl sound reducing canopy (sound level not more than 75 db at a distance of 1 mtr) 16 guage as per guideline issued by Central Pollution control board 415 volts, 3 phase, 50 Hz supply complete with panel for automatic starting on main failure control panel suitable for giving an output of 40 KVA and capable of operating temperaturerange at Gorakhpur (UP) and alternator of suitable capacity and RPM coupled with each other with flexible coupling mounted on Antivibration pads on foundation as recommended by manufacture. The DG set shall comprise of AMF panel with auto change main to generator and viceversa Self starter with batteries, Turbocharger, water cooled & comprising all standard fittings, fixtures & all piping etc as below:- Technical Specification of DG set : Electric Generating set placing the engine and AC Generator on M.S. frame duly bolted, coupled, aligned, testing and housed within the acoustic enclousre complete with following: Prime Power rating KVA : 40, Voltage - 415, No of phases :3, Power Factor - 0.8 Engine - Water cooled Diesel Engine (As per latest CPCB Norms Compliance) developing BHP to suit 110% load of 40 KVA alternator having self start engine (including batteries with provnof charging the batteries and leads) suitable to drive above specified alternator complete with foundation (foundation design as per OEM), as per IS :10001/10002, coupled directly through flexible coupling, multi cylinder four stroke, cold starting, 1500 RPM industrial type as per BS-649 or IS-1601 with AI electronic/mechnical (as recommendation of OEM) governor suitable to regulate speed of DG set from No load to full load completed with fuel tank of cap as per manufacturer recommendations, fuel lines, exhaust pipe duly insulated with asbestos rope and with support and silencer mufflers etc for continuous operation and standard accessories, sump pre heaters, cold start kit etc all as specified and directed. A.C. Generator - Brush less type, Synchronous, A.C. Generators continuously rated for 415 Volts, 3 phase, 4 Wire, 50 Hz, 1 Power factor (lagging) at 1500 RPM, 4 Pole, Screen protected, drip proof, horizontal foot-mounted type, self excited, self regulated with static excitation system, Class "H" insulation,. The Alternator is capable of developing rated output & able to take 10% overload for one hour at every 12 hrs of operation. |
| 174 | S&F ON Load change over switch 415 Volt in steel metal enclouser 4 pole of capacity 63, Ampscomplete all as specified and directed . |
| 175 | Supply and laying and testing cable XLPE insulated, screened, PVC bedded, galvanized steel strip or wire armouredelectric power cables (Heavy duty) 1100V grade with aluminum conductor of cross sectional area condutor of size 3.5 core 35 Sqmm, complete all as specified and directed. Make: KEI, Pplycab, Havells. |
| 176 | M&L for sand filling under floors or in foundation including watering and consolidation, complete all as specified and directed. |
| 177 | M&L for Bricks, common brunts clay buildings bricks sub class "B" of size 225x115x75mm for protection of cable in trenches, complete all as specified and directed. |
| 178 | M&L for demolition of Road/path concrete in ground floor and paving n.exc.15 cm thickness (bellow or above ground level), complete all as specified and directed. |
| 179 | M&L for cement concrete type B-2, 1:2:4(40mm graded aggregate) 150mm thick, complete all as specified and directed. |
| 180 | M&L for GI tubes of size 50mm dia light grade, galvanised with all fittings, laid in trenches for protection of cable in road/drain crossing, complete all as specified and directed. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
