Military Engineer Services-MES has published Tender For Provision Of Storage Shed For Station Strores At Fort Area Nagpur.. Submission Date for this Tender is 15-05-2024. Shed Construction Tenders in nagpur Maharashtra. Bidders can get complete Tender details and download the document.
| Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
| 1 | 03-May-2024 | Corrigendum 01 | BOQ | 15-05-2024 |
| FileName | File Description | File Size |
| 3e8ebd88-7e30-4b60-a672-227e2b204516.html | Tender Notice | 0 KB |
| BOQ_728675.xls | Tender Document | 0 KB |
| Tenderdocument8640.pdf | Tender Document | 0 KB |
| Tendernotice_1.pdf | Tender Document | 0 KB |
| Sl. No. | Item Description |
| 1 | Surface excavationin soft /loose soil n exc 30 cm deep and averaging 15 cm deep and getting out in soft/loose soilcomplete all as specified and as directed. |
| 2 | Excavation in trenches n.exc 1.5m wide and n.exc 1.50m deep and getting out in Hardsoil complete all as specified and as directed. |
| 3 | M&L PCC (1:4:8) type D2 using 40mm graded aggregate in foundation complete all as specified and as directed. |
| 4 | M&L for Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter complete all as specified and as directed. |
| 5 | M & L for flat and curved Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including sup- ports, overhangs, etc. also splays between floors and beams, etc. Complete all as specified and as directed. |
| 6 | M & L for Formwork to sides of pillars, posts, struts, piers, columns and stanchions fairfinished surfaces forSquare, Circular rectangular on plan or polygonalconcrete complete all as specified and as directed. |
| 7 | M & L for Mild steel bars 10mm dia and over, cut to length, bent to shape reqd, incl cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia complete all as specified and as directed. |
| 8 | M & L for Mild steel bars but 5mm dia and over upto and including 10mm dia in stirrups, spacers and binderscut to length, bent to shape reqd, incl cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia Complete all as specified and as directed. |
| 9 | M&L forRCC M25 (Design Mix) as in Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc; basement slabs, under-reamed piles and mass concrete complete all as specified and directed |
| 10 | M&L forRCC M25 (Design Mix) as in Columns, pillars, piers, posts and struts complete all as specified and directed |
| 11 | M&L forRCC M25 (Design Mix) as in Beams, cantilevers, bressummers, lintels over 1.5m span complete all as specified and directed |
| 12 | M&L for RCC M25 (Design Mix) as in chajjaetc complete all as specified and as directed. |
| 13 | M&L for PCC (1:2:4) type B1 using 20 mm graded agg as in coping /bed block etc inclduing necessary form work complete all as specified and as directed. |
| 14 | M&L for PCC (1:2:4)) type B1 using 20 mm graded agg as in benching/padding /moulding on topof chajja junctionsetc.complete all as specified and directed |
| 15 | M&L forbrickwork with fly ash bricks old size, straight or curved on plan exc 6m mean radius, built in CM 1:6 complete all as specified and as directed. |
| 16 | M&L Rendering 10 mm thickin CM 1:6 onfair faces of brick/concrete work surfaces to be finished even and smooth (without using extra lime or cement complete all as specified and directed. |
| 17 | M&L for preparing newly plastered surfaces and applying two coats oil bound distemper over a coat of 1mm thick putty over a coat of chlk whiting primer complete on wall as completed all as specified and directed |
| 18 | M&L Rendering 15 mm thickin CM 1:4 onfair faces of brick/concrete work surfaces to be finished even and smooth (without using extra lime or cement complete all as specified and directed. |
| 19 | M&L for Finishing walls with Acrylic Smooth exterior paint of required shade : New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) complete all as specified and as directed. |
| 20 | S&F powder coatedaluminium frame for doors,window,ventilator with one or more rebates including joining cleat for fixing etc complete all as specified. |
| 21 | Supply and fix aluminium (powder coated ) three track sliding window comprising of one fly proof shutter and two glazed shutters with frames of size 92.0mm x 31.75mm x 1.30mm thick and shutter frames of size 40mm x 18mm x 1.55mm thick with necessary joining cleats, glazing clips, rubber gasket, anodised aluminium snap beading and connected locking arrangement complete all as per manufacturer"s catalogue and specifications complete all as specified and directed. (Notes : (i) Glass filling in panels of windows and aluminium wire mesh/wire cloth shall be deemed to be included in the quoted rate for the item;(ii) Aluminium alloy wire cloth in panels of wire gauzed shutter shall be 0.45 mm nominal dia of wire and avg width of aperture 1.40 mm, fixed with aluminium wire staples; (iii) Glass filling in panels of glazed shutter shall be 5 mm thick tinted sheet glass of approved make and shade/tint . |
| 22 | S&F framed work such as grills ,guard bars with mild steel Square bars with ends of bars shouldered and/ or riveted and similar work confirming to FE 290 Gde-E-165 complete all as specified and as directed. |
| 23 | S&F forhydraulic door closer of aluminium fixed to door shutters of designation 2 all as specified complete all as specified and as directed. |
| 24 | M&L for powder coated aluminium door shutters single/double leaf, side hung type, with topand lock rail of size 83X44.45X2mm thick, bottom rail 150X 44.45X2mm thick styles/meeting styles shall be of size 83X44.45X2mm thick including jointing cleats, rubber beading snap fit clips, aluminium screws etc, panels fitted with prelaminated particle board/glass including builders hardware ie aluminium tower bolt 150mm long 2 nos to each shutter , aluminium door handle 200mm long 2 nos to each shuttercomplete all as specified.(Prelaminated board and glassto be measured & paid separately). |
| 25 | S&F 12mm thick prelaminated particle board (both sides laminated) of interior grade, type-II of approved brand with lamination of approved shades complete fitted in door panels, partitions etc complete all as specified and as directed. |
| 26 | S&F plain sheet glass, ordinary quality 4.8mm thick in panels of aluminium doors/windows/partitions fixed with aluminium glazing clips & rubber beadingexc 0.5 sqm each pane complete all as specified. |
| 27 | S&F Curtain rod with a telescopingbrackets to fit bothrod and mounting hardware modular type complete all as specified and directed. |
| 28 | M&L for Anti -termite treatment to the under plinth protection, top surface of filled earth ,bottom and sides of excavation at rate of 5 Ltrs of emulsion per square meter of surface area complete all as specified and as directed. |
| 29 | M&L for ATT to treating the backfill in contact with foundation at the rate of 7.5 Ltrs of emulsion per square meter of vertical surface complete all as specified and as directed. |
| 30 | M&L for Hard core of gauge not exc 63mm deposited, spread and levelled in layers not exc. 15 cm thick, watered and rammed to a true surface of 100mm thick with broken/stone/boulers complete all as specified and as directed. |
| 31 | M & L for Moorum/red bajri filling in floors or pavings, laid in layers n exc. 15 cm thick, spread, levelled and rammed including wateringcomplete all as specifiedand directed. |
| 32 | M&L for 100mm thick PCC (1:4:8) type D2 using 40mm graded aggregateas in sub base complete all as specified and as directed. |
| 33 | M & L for providing 40 mm thick PCC 1:2:4 Type B-1 (using 20 mm graded stone aggregate) as in flooring including finishing the cement concrete surface even and smooth with using extra cement complete all as specified and as directed. |
| 34 | M&L for 38 mm wide and 3mm thick glass dividing strip inserted in postion complete all as specified and directed |
| 35 | M&L for Roof trusses (framed), trussed, purlins, crane ganbies, rails and fastenings and heavy bracket framing (lleam, tee, angle, charmel or flat sections) including distance pieces, cleats etc conforming to IS 1161-1979 grade Fe 290 (Gde E-165) complete all as specified and as directed. |
| 36 | S&F Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, with riveted, bolted or welded attachment etc complete all as specifiedand directed.Fe 410 -W (Gde-E- 250) quality-A etc complete all as specified and as directed. |
| 37 | S&F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as sepcified. |
| 38 | S&F Pre- painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding /velly gutter to wall, fixed with self tapping screws complete all as sepcified. |
| 39 | S&F PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls/floor 110mm bore complete all as specified and as directed. |
| 40 | S&F PVC (SWR) bends any radius of 110 mm bore complete all as specified and as directed. |
| 41 | M&L for preparation New steel and iron surface not otherwise described over 10cm width or girthand applying two coats of synthetic enamel paint over a coat of primer complete all asspecified and directed. |
| 42 | M&L for75mm thick PCC 1:3:6 type C-2 as in plinth protection fixed even and smooth with out using extra cement complete all as specified and as directed. |
| 43 | M & L for 25mm thick Cement concrete type B-0, 1:2:4 (12.5mm graded aggregate)complete all as specifiedand directed. |
| 44 | M&L for vitrifiedceramic tiles 10 mm thick(square or rectangular) polished, light shed area of each tile not exceeding 0.36 sqmin floors etc set and jointed in neat cement slurry and pointed in site or colored cement to match over 15mm cement screed bed in cement mortar 1:6 as specified and directed. |
| 45 | M&L forvitrifiedceramic tiles 10 mm thick(square or rectangular) polished, light shed area of each tile not exceeding 0.36 sqmin Skirting etc set and including rendering 10mm thick in cement mortar 1:4 complete all as specified and as direted. |
| 46 | S&F of 5 to 7mm thick hollow, PVC false ceiling decoratie type fixing at site with GI grid frame work as per manufacture instruction complete all as specified and as directed. |
| 47 | M&L for glazed Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade laid over a layer of fine river sand, watering and consolidating complete. (Note: Sand will be measured paid for seperately under respective item supplied only). |
| 48 | Supply only river bed fine sand for screed bed for paving flooring complete all as specified and as directed. |
| 49 | Returning, filling in, including spreding, levelling, watering and well ramming in layers n.exc 25cm complete all as specified and as directed. |
| 50 | Removing excavated material exc. 250 m but n exc. 500 m and depositing where directed complete all as specified and as directed. |
| 51 | M&L for point wiring with 1.5 sqmm multi stranded copper conductor 1100 volts.grade FRLSH PVC insulated unsheathed cable with proper colour codingdrawn in including PVC concealed conduit not less than 20 mm dia with all accessoriesandFRLSH PVC insulated 1.5 Sqmm multi standard sheathed copper wire for continues earth,incl PVC conduit with necessary clamps andmodular sunken box and connecting earthConnections of cable with MCB"s or bus bar shall be done through proper size copper/brassthimbles. for the following :-One light /fan point controlled by one switch |
| 52 | All as per item No. 51 above but One 5 pin socket outlet 5 Amps on independent boardcomplete all as specified and as directed. |
| 53 | All as per item No 51 here in before but with cable size 4 Sq mm for one 5 pin 15/16 Amps socket out let on independent board and multistrand insulated copper earth continuity conductor of size 2.5 sqmm all as specified and directed. |
| 54 | Supply and fixingmodular switch piano single pole, one way 6 Amps 1 module, complete all as specified and directed. |
| 55 | Supply and fixing modular socket outlet2/3 pin 6 Amps combined 2 module, complete all as specified and directed. |
| 56 | Supply and fixing modular switch piano flush type 16 Amps single pole one way, one module, complete all as specified and directed. |
| 57 | Supply and fixing modular socketmultipurpose 3 pin 6/16 Amps combined 2 module, complete all as specified and directed.. |
| 58 | Supply and fixing modular step type, 2 module electronic fan regulator heavy duty 120watts 240 volts. , complete all as specified and directed. |
| 59 | Supplying & fixing for ceiling rose PVC Polycarbonate isolated body 62.5 x 25 mm, three terminals, complete all as specified & directed. |
| 60 | Supply and fixing modular cover plate with metal frame (inner and outer) 3 module for mounting switch and sockets complete all as specified and as directed. |
| 61 | Supply and fixing modular cover plate with metal frame (inner and outer) 8 module for mounting switch and sockets all as specified and as directed. |
| 62 | Supply and fixing LED lights fitting 1x 20W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose all as specified and directed. |
| 63 | Supply and fixing ceiling fans complete with blades, down rods, and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) complete all as specified and as directed. |
| 64 | Supply & fix sheet metal enclosure MCB distribution board double door. Single pole & neutral 240 volts 12 way with 200 amp rated bus barcomplete all as specified and as directed. |
| 65 | Supply and fixing miniature circuit breaker (MCB) single pole of capacity 63 Amps rating 240V, 10KA "C" curve and current carrying capacity in the MCB DB complete with connection testing and commissioning complete all as specified and as directed. |
| 66 | Supply and fixing MCB SP 6 to 32 Amp rating 240V, 10KA "C" curve and current carrying capacity in the MCB DB complete with connection testing and commissioning. complete all as specified and as directed. |
| 67 | Materials and labour as for earthing complete with galvanized earth plate electrode 600 x 600 x6mm thick burried directly in ground vertically to a depth not less than 2.25 M below normal ground level ) with top edge of the plate not less than 1.50 M below normal ground level , connected to and including galvanized steel wire 4mm dia as earth lead soldered and rivetedto earth plate by means of nuts, bolts, check nuts & washers, of galvanizediron or steelwith connected to test point and testing on completion including 15mm GI light grade pipe for earth leadprotection from earth point to earth plate, including provnadequate quantity of charcoal dust mixed with35 % common salt to a packed thickness of not less than 15 cm in alternate layers of charcoal and salt on all sides of earth platewith 20mm bore medium grade GI Pipe for watering,GI check nut, funnel and wire meshwith and includingall necessary excavation& earth work in soft/loose soil, returning filling in, removal of surplus soil to a distance 50 metre,,PCC 1:3:6 type C-1 as in earth pit, 40 mm thick RCC cover using cement concrete 1:2:4 type B-1 reinforced with & including 8 mm dia mild steel TMT bar @ 100 mm c/c Both way with suitable handle for lifting arrangement & including form work complete all as specified and shown in electrical plate No 3 of MES SSR Part I 2009 and as directed. NOTES:- (i) On testing, after completion of Job, if desired earth resistance is not obtained, the earthing shall be redone at without any extra cost by contractor. |
| 68 | Excavation in trenches for laying of cable trench, pole and stay foundation in any type of soft/loose soil not exceeding 1.5 mtr wide and not exceeding1.50 mtr deep and getting out complete all as specified and as directed. |
| 69 | Supply and fix Double wall corrugated High Density Polymer Ethyl(HDPE) pipe for laying of electric cable of size 50 mm outer diameter and 38 mm inner diameter with IS 14930 (part 2) 2001 and 6mm thickness laid in trenches(Including cutting of roads or any others hard surfaces and making good disturbed surfaces) , wall, poles including bends, sockets and other connected accessories complete all as specified and directed. Make : Ketron/tirupati. |
| 70 | Supply and laying in trenches or fixing in walls / poles or drawing through pipe XLPE insulated, screened,PVC bedded, galvanised steel strip or wire armoured,electric power cables ( heavy duty) with aluminium conductor, 1100 volts, grade cross sectional area 16 sq mm,2 core including testing after laid and jointed all as specified and as directed |
| 71 | Supplying and fixing in repair MCCB 160 Amps with sheet metal enclosure, MCCB ,4 Pole, 50Hz ,Icu= 25 KA at 415 volts, with thermal magnetic release & Ics=100% Icu with adjustable over load setting (minimum 80% to 100%)complete all as specified and directed. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
