Military Engineer Services-MES has published Tender For Comprehensive Maintenance For Centralized Buildings And Repair Maintenance Of Roof Leakage Roof Slabs In Zone A Under Age Br I At Bb Cantt Srinagar. Submission Date for this Tender is 14-05-2024. Building Work Tenders in Srinagar Jammu And Kashmir. Bidders can get complete Tender details and download the document.
| FileName | File Description | File Size |
| 05ba39c3-f950-4de3-a018-f94491fed5d1.html | Tender Notice | 0 KB |
| BOQ_728602.xls | Tender Document | 0 KB |
| Tender27.pdf | Tender Document | 0 KB |
| Tendernotice_1.pdf | Tender Document | 0 KB |
| Sl. No. | Item Description |
| 1 | Dismantling of Plain or corrugated steel sheeting, any gauge thickness, including Nanital or similar pattern roof coverings complete all as specified and directed. |
| 2 | S&F Pre-painted galvalume aluminium Zinc coating steel GI based corrugated (looks like mangalore pattern) steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws complete all as specified and directed. |
| 3 | S&F Pre-painted galvatume aluminium Zinc coating steel GI based plain steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws complete all as specified and directed. |
| 4 | Dismantling of timber scantling 40 Sqcm and over in section in any position unframed work complete all as specified and directed. |
| 5 | M&L 2nd class soft wood clean sawn as in scantlings timber framed and fixed complete all as specified and directed. |
| 6 | All as per item No.05 above but except timber complete all as specified and directed. (Old timber obtained from dismantling shall be re-used) |
| 7 | Dismantling wall and ceiling boards (fibre, pulp, insulation, etc) or Insulation boards/slabs/ blankets, any thickness, including cover filletscomplete all as specified and directed. |
| 8 | M&L 6 mm thick plywood grade BWR type BB fixed with screws/nails to timber frame work for wall panelling and wall/ceilingcomplete all as specified and directed. |
| 9 | M&L for insulated PVC wall lining 25mm thick consisting of PVC insulated panels having expended polystyrene (EPS) stuck to 2mm thick wood grain printed PVC sheet used instead plain colour sheet including suitable PVC beadingcomplete all as specified and directed. |
| 10 | S&F Gypsum Board 10mm thick as in ceiling fixed with screw as per manufactures instructions including GI Frame work for gypsum board made out of GI sheet not less than 20 Gauge thickness in ceiling fixed with screws, frame suspended with 4mm dia GI wire as per manufactures instructions, complete all as specified and directed. |
| 11 | S&F in repair wooden laminated flooring 1200mm x 1200mm x 8-10 mm thick with adhesive and base as specified by manufacturer, including 12mm thick BWR plywood and necessary frame work and finally finishing with french polish (two or more coats) and fixed complete all as specified and as directed. |
| 12 | M&L for Khatamband pattern false ceiling, design as approved by GE with ornamental wood work made out of ornamentalwood pattern including 12 mm thick BWR plywood and necessary framework and finally finishing with french polish (two or more coats) and fixed complete all as specified and as directed. |
| 13 | M&L for Australlian wood panelling 10mm thick including 9mm thick BWR plywood on the wall and finally finishing with french polish (two or more coats) and fixed complete all as specified and directed. |
| 14 | Designing providing and fixing 6mm thick Aluminium Composite Cladding over RCC/Brick surfaces either segmental/straight in plan wherever specified with extruded aluminium U sections, angle, cleats, weather sealants, backer rods of required size stainless steel screws, rivets, brackets, drilling and fixing the cladding to either masonry or reinforced cement concrete as the case may be manufacturer"s specifications, complete the work in all respect including all necessary accessories. At all soffits aluminium cladding shall be bend 90 degree and joints at corner or edges will not be acceptable. On horizontal surface, the size of sheet should be maximum available of size complete all as per manufacturer"s specifications and as directed. |
| 15 | S&F wodden fillets of 2nd class softwood, wrought rectangular in section of sectional area exc 13 Sqcm and n.exc 25 sqcm fixed with nails etc complete all as specified and directed. |
| 16 | Taking down cement plaster, any description on brick or stone walls etc including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed. |
| 17 | M&L for15mm thick rendering on fair faces of brick /concrete surfacesin cement mortar 1:6 and finishedeven and smooth without using extra cement complete all as specified and directed. |
| 18 | M&L for 15mm thick rendering on fair faces of brick / concrete surfaces in cement mortar 1:4 and finished even and smooth without using extra cement complete all as specified and directed. |
| 19 | M&L for5mm thick rendering on fair faces of concrete surfacesas in ceiling in cement mortar 1:3 and finishedeven and smooth without using extra cement complete all as specified and directed. |
| 20 | Dismantling floor hearth or wall tiling including cement morter (but not backing including rubbish off the permises) complete all as specified and directed. |
| 21 | Demolition of unreinforced cement concrete in ground floors and pavings n.exc. 15 cm thickness (below or above ground level) complete all as specified and directed. |
| 22 | M&L 25mm thick PCC 1:2:4 type B-1 (using 20 mm graded crushed stone aggregate) as in sub base of floors as in level course complete all as specified and directed. |
| 23 | M&L for Non skid ceramic colour tiles 7 to 8mm thick (square/rectanglar) area of each tile exceeding 0.11 sqm but not exceeeding 0.18 sqm, in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile laid over and including 15mm thick screed bed in cement mortar 1:6 complete all as specified and directed. |
| 24 | M&l vitrified ceramic tiles (Dark shade/double charged) 10mm thick (square/rectanglar) polisehed, area of each tilesexceeding 0.42 sqm but not exceeding 1.00 sqm,infloors etc set and jointed in neat cement slurrry and pointed in white or coloured cement to matchthe shade of tile laid over and including 15mm thick screed bed in cement mortar 1:6complete all as specified and directed. |
| 25 | M&L for glazed ceramic coloured/printed tiles 450mm x 350mm x 7mm thick as in vertical surfaces such as dado, skirting set jointed in neat cement slurry including pointed in white or coloured cement to match the shade of tile fixed over and including 10mm thick backing layer in cement mortar 1:4 complete all as specified and directed. |
| 26 | Dismantling of Stone slabs and tiles of any description or thickness in floors, aprons etc. laid in any mortar complete all as specified and directed |
| 27 | M&L for 18-20 mm thick black granite work table rubbed and polished in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cment (1:2) using marble dust with admixture of pigment to match with shade of granite fixed over and including 15mm thick screed bed in CM 1:6 complete all as specified and as directed. |
| 28 | M&L for 18-20 mm thick black granite work table rubbed and polishedfor wall lining (veneering to wall) 12 mm thick in cement mortar (1:3) and pointing with white cement(1:2) using marble dust with admixture of pigment to match with shade of granite, fixed over and including 15 mm thick screed layer in cement mortar 1:4, complete all as specified and directed. |
| 29 | Demolition of concrete of any description and in any position not otherwise specifially provided for complete all as specified and directed. |
| 30 | M&L for 75mm thick PCC 1:4:8 type D-2 ( using 40mm graded crushed stone aggregate) as in sub base of flooring, filling and mass concreateincluding finished surface even and fair complete all as specified and directed. |
| 31 | Providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footpath, parks, lawns, drive ways or light traffic parking etc, of required strength, thickness & size/shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50 mm thick compacted bed of fine sand, compacting and proper embedding/laying of inter locking paver blocks into the sand bedding layer thorugh vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra cement complete all as specified and as directed |
| 32 | Demolition of brick work or stone masonry built in cement mortarincludingall quoines arches, pillar etc but excluding ashlar facing, dressed stone work and precast concrete articles, all as specified. |
| 33 | M&L for brick work with sub class "B" bricks straight or curved on plan built in CM 1:6 complete all as specified and directed. |
| 34 | Taking down chowkats or frames (without taking off shutters from frame) exc 1.50 Sqm and not exc 4.00 Sqm each including cutting holes for taking out hold fasts or dismantling brick work (holes cut and any other damage to jambs, walls for taking out holdfasts shall be finished identical to existing finish without any extra cost to Govt.) complete all as specified and directed |
| 35 | Taking down chowkat or frames with shutters (without taking off shutters from the frames) n.exc 1.5 Sqm each complete all as specified. |
| 36 | S&F aluminium door air tight anodized frame made of size 100x45mm of sheet thickness 1.5mm with one or more rebate including jointing cleats hinges etc for fixing anodized aluminium door shutter fully paneled )two NOs of panel on each shutter) with 5.5 mm thick tinted plain glass shutter rail made of 80x45mm of sheet thickness 1.5mm (top, bottom, middle and side rail).Single/double leaf side hung type including necessary joint cleats, anodized aluminium fitting/aluminium fitting such as aluminium butt hinges 100mm long 4 NOs on each shutter, aluminium anodized tower bolt 200mm long 3 NOs for each door, aluminium anodized handle 150 mm 2 NOs ‘D’ type for each.Shutter & locking 6 lever of make Harrison one on each door, bottom door spring one on each shutter including hydrullic door closer.All door fitting shall be ISI marked (size of each door shall be as per site requirement). |
| 37 | M&Laluminum window openable/fixed type with aluminium anodized frame of section 62.30x44.50x4.5mm with shutter stiles rail of aluminium section of size 47.62x44.45x1.5mm thick including jointing cleat for fixing builders hardware, glazing clips, rubber packing, anodized aluminium snap beading screw etc for fixing glass pans in frame shutter covered with and including fully selected quality 5.5mm thick tinted galss with rubber packing complete all as specified and directed. |
| 38 | S&FMortice lock, vertical type size 100 mm mild steel 2 levers complete all as specified and as directed |
| 39 | S&F 15mm dia steel water tubing medium grade galvanised with all fitting and fixed complete to wall and ceiling or laid in floors including taking up or down old steel tubing and connections, including cleaning for refixing or removal tfrom site complete all as specified and directed. |
| 40 | S&F 20mm dia steel water tubing medium grade galvanised with all fitting and fixed complete to wall and ceiling or laid in floors including taking up or down old steel tubing and connections, including cleaning for refixing or removal tfrom site complete all as specified and directed. |
| 41 | S&F 25mm dia steel water tubing medium grade galvanised with all fitting and fixed complete to wall and ceiling or laid in floors including taking up or down old steel tubing and connections, including cleaning for refixing or removal tfrom site complete all as specified and directed. |
| 42 | S&F in repair 15mm dia bib taps cast copper alloy, fancy type chromium plated,with crtuch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed.Make: - Marc Cat Part No MOR-1020 or techno commercially equivalent make/model in Jaquar/ Kohler/ Plumber/ Crea. |
| 43 | S&F in repair pillar cock, cast copper alloy, with capstan heads, chromium plated, fancy type ,screwed down high pressure, with or without lettered "Hot" or "cold" with long screwed shanks and fly nuts, screwed for iron pipe of dia 15 mm complete all as specified and directed. Make: - Marc Cat Part No MOR-1010 or techno commercially equivalent make/model in Jaquar/ Kohler/ Plumber/ Crea. |
| 44 | S&F in repair vitreous china wash hand basin white flat back of size 630x450 mm including bracket, cutting for and pinning the ends of brackets or erecting stands exclusive of waste pipe but including brass chromium plated waste coupling with long screwed sank and fly nuts complete all as specified and directed. |
| 45 | S&F in repairs 15mm dia CP fancy type mixture tap of standard quality for mixing hot & cold water as approved with centre hole mixer with fittings complete all as specified and directed. |
| 46 | S&F in repair PVC valve less syphonic action type (Twin type) flushing cistern 10 Ltr capacity low lavel coloured with inlet ball valve float and handel brackets complete all as specified and directed. |
| 47 | S&F in repairs wall mounted EWC with all fittings and accessories all as per manufacturers instruction complete all as specified and directed. |
| 48 | S&F in repairs EWC cascade with all fittings and accessories all as per manufactures instruction, complete all as specified and directed. |
| 49 | S&F PVC connection 15mm size with PTMT nuts of length 450 mm, fixed in repair complete all as specified and directed. |
| 50 | S&F grating square fitting of size 150mm made in two parts for smell and mosquito proofing with minimum 25mm water seal of PTMT (Min wt 85 gms) complete all as specified and directed. |
| 51 | S&F in repair angle valve fancy type chromium plated with wall flange cast copper alloy screwed down high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unions of 15mm bore complete all as specified and directed. |
| 52 | S&F in repairs 32 mm dia PVC waste pipe for WHB complete all as specified and directed. |
| 53 | S&F 1000ltr capacity Rotational moulded polyethlene water storage tanks, three layers (cylindrical vergical with closed top) hoisted and fixed in position as specified in SSR Part I, including dismantling of old unserviceable water tanks and removing from site complete all as specified and directed. |
| 54 | Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc., including cleaning or refixing or removal from site complete all as specified and directed. |
| 55 | S&F 110mm diaPVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to wall complete all as specified and directed. |
| 56 | S&F 75mm diaPVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to wall complete all as specified and directed. |
| 57 | S&F PVC (SWR) branch piece single equal or unequal 110mm bore complete all as specified and directed. |
| 58 | S&F PVC (SWR) branch piece single equal or unequal 75mm bore complete all as specified and directed. |
| 59 | S&F 110mm diaPVC (SWR) bends any radius complete all as specified and directed. |
| 60 | S&F 75mm diaPVC (SWR) bends any radius complete all as specified and directed. |
| 61 | Dismantling wrought iron or mild steel work of any description not other wise provided, complete all as specified and directed. |
| 62 | S&F framed work such as grills, gratings, etc.. with ends of barsshouldered and/or riveted,or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and directed. |
| 63 | M&L for preparing new plastered surface of walls and applying two coats of distemper oil emulsion white or tinted over 1-2mm thick wall care putty complete all as specified and directed. |
| 64 | M&L prepration of old surfaces with complete removal of existting treatment of wall and applyingtwo coats ofwhite or tinted over 1-2mm thick wall care putty complete all as specified and directed. |
| 65 | M&L for preparation of new plastered surfaces of wall and Applying two coats of Apex (ultima) paint over a coat of primer with and including with 2-3mm thick wall care putty complete all as specified and directed. |
| 66 | M&L for preparation of old treated surfaces of wall and applying two coats of Apex (ultima) paint over a coat of primer complete all as specified and directed. |
| 67 | M&L for preparation of new wooden surfaces of any description over 10 cm width or girth & applying two coats synthetic enamel paint over a coat of pink primer complete all a specified and directed. |
| 68 | M&L for preparation of old painted wooden surfaces of any description not other wise described over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed. |
| 69 | M&L for preparation of new steel surface of any description not otherwise describe over 10cm width or girth and applying two coats of synthetic enamel paintover one coat red oxide complete all as specified and directed. |
| 70 | M&L for preparation of old painted steel surfaces of any description not other wise described over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed. |
| 71 | S&F in repair double action floor spring hydraulically regulated made up of minimum 1.25mm thick aluminium sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty, complete all as specified and directed. |
| 72 | S&F in repair looking mirror of 5.5mm thick bevelled edge mirror of slected quality glass, mounted on wall with steel plugs with chromium plated brass screws and cup washers complete all as specified and directed. |
| 73 | S&F in repair glass shelf 600mm long 125mm wide of CP completeall as specified and directed.Make :- JaquarCat Part No ACN-CHR-1171N or techno commercially equivalent make/model as approved by GE. |
| 74 | S&F in repair toilet paper holder of stainless steel fixed to wall with chromium plated CP brass screw complete all as specified and directed Make:- Jaquar Cat Part No -AKP-CHR-35753PS or technocommercially equivalent make/model as approved by GE. |
| 75 | S&F in repair liquid soap dispensor complete, all as specified and as directed. Make:- Jaquar Cat Part No - ACN-CHR-1135N or technocommercially equivalent make/model as approved by GE. |
| 76 | S&F in repairs Urinals with sensor, flat back with integrated EFS of size 740x330mmx362mm, lvory with grating and union for discharge pipe including connecting to waste pipe complete, all as specified and as directed. Make:- CeraCat Part No 5005Aor equivalent in Neycer/ Jaquar/Somany. |
| 77 | S&F 0.63mm thick galvanised, corrugated mild steel sheeting with two corrugations side lap, fixed with coach screws and washers, in roofs, walls etc. with grade of zinc coating 275 complete all as specified and directed. |
| 78 | S&F 0.80mm thick galvanised, Plain, galvanised, mild steel sheeting, in ridges, hips, valley gutters, drip and straight flashings (length and girth as fixed) with grade of zinc coating 275 complete all as specified and directed. |
| 79 | S&F 0.71mm thick plain aluminium sheeting Alloy 31000 H4 in ridges, hips, valley gutter, drip and straight flashing (length and girth as fixed) complete all as spefied and directed. |
| 80 | S&F 500 ltrs capacity Rotational moulded polyethylene water storage tanks, three layers (cylindrical vertical with closed top) hoisted and fixed with 15mm ball valves high pressure in position as specified in SSR Part-I, including dismantling of existing unserviceable tanks and removing from site complete all a specified and directed. |
| 81 | Disconnecting existing tanks exc 250 but n exc 500 ltr capacity setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position. (Cleaning repairing, etc. measured separately) complete all as specified and directed. |
| 82 | Cleaning and removing all scale and dirt, etc, from tanks and from mouths of circulating pipes, etc. (capacity exc 250 but n exc 500 ltrs.) and writing cleaning date and next due date of cleaning in bold letters complete all as specified and dirceted. |
| 83 | Disconnecting existing tanks exc 500 but n exc 1000 ltr capacity setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position. (Cleaning repairing, etc. measured separately) complete all as specified and directed. |
| 84 | Cleaning and removing all scale and dirt, etc, from tanks and from mouths of circulating pipes, etc. (capacity exc 500 but n exc 1000 ltrs.) and writing cleaning date and next due date of cleaning in bold letters complete all as specified and dirceted. |
| 85 | Excavation over areas, n.exc 1.5 m deep and getting out in soft/loose soil over semi underground roof to excess upto roof treatment complete all as specified and directed. |
| 86 | Spreading and levelling in layers n.exc 25 cm thick in layers earth obtained from excavation (Item No. 85.00 above) after roof treatment over semi underground building slabs complete all as specified and directed. |
| 87 | Demolition of cement concrete (un-reinforced)in roof/floors other than ground level beam, stair case, landing, chajjas and similar items includingwater proofing treatment in any layersand removal of debris to distance exceeding 250m and not exceeding 500m from the site complete all as specified and directed. |
| 88 | M&L for 40mm thick , PCC 1:2:4 (Type B-1 using 20mm graded crushed stone agg) as in levelling course to match the undulations of roof and in coping , roof kerbs, fins etc including benching complete all as specified and directed. |
| 89 | M&L 10mm thick cement screed in CM 1:3 mixed with and including approved water proofing compound as per manufacturer"s instructions over RCC roof slab and vertical surface, finished even and smooth by using steel trowel complete all as specified and directed. |
| 90 | M&L for APP based polymeric membrane minimum weighing 3 Kg/Sqm and minimum 3mm thick prefabricated in five layers and reinforced with polyster non woven fabric (wt not less than 150 gms/sqm) laid over a coat of hot bitumen grade 85/25 @ 1.2 Kg/Sqm over primed surface including bituminous primer conforming to IS-3384 applied @ 0.3 ltr/Sqm by forced and torching overlaps with a propane or a butane gas torch, with an overlapof 150mm in longitudinal and horizontal directions ceilings and joints finally pasted with thermofused with LPG flames as per manufacturer"s instructions incl preparation of surface and including two coats of aluminium paint over top surface of water proofing membrane complete all as specified and directed. Note :(i) The water proofing treatment shall be got carried out by manufacturer or their authorised applicators. (ii) After completion of roof treatment as certified by Engr-in-Charge a ponding test shall be carried out for 72 hrs in presence of User authorities and A ceritificate duly signed by all cencerned including User shall form part of Final Bill. The cost of this effect shall be included in quoted rate nothing extra shall be admissible to the contractor. (iii) After execution of the work the Contactor shall submit 10 years warranty to the department towords work executed. (Refer PS Clause 21.00). |
| 91 | Four course roof treatment consists of as under :- (a) Preparation of surface by cleaning with water and make the surface dust proof and applying one coat of bituminous primer conforming to IS-3384 @ 0.30 Ltr per sqm. (b)Applying one coat of hot bitumin grade 85/25 @ 1.2 Kg/ Sqm. (c) Laying of APP based membrane as specified thickness and weight.(d)Applying two coats of aluminium paint @ 100 ml/ Sqm |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
