Military Engineer Services-MES has published Tender For Repair And Maintenance Of Plaster, Chajja, Roof Of Jcos/Ors Map Accommodation Under Ge (West) Mathura. Submission Date for this Tender is 14-05-2024. Building Work Tenders in mathura Uttar Pradesh. Bidders can get complete Tender details and download the document.
| Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
| 1 | 24-Apr-2024 | Critical Dates | Date | 14-05-2024 |
| FileName | File Description | File Size |
| bfdb9840-ca9a-40ad-8e14-4f7a14d9c7e8.html | Tender Notice | 0 KB |
| BIDDeC.pdf | Tender Document | 0 KB |
| BOQ_728503.xls | Tender Document | 0 KB |
| Tender.pdf | Tender Document | 0 KB |
| Tendernotice_1.pdf | Tender Document | 0 KB |
| Sl. No. | Item Description |
| 1 | Taking down cement plaster including racking out joints, hacking for key & scrubbing down with water etc complete all as specified and directed by Engineer-in-Charge. |
| 2 | Dismantling, floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises. |
| 3 | Demolition of cement(un-reinforced) concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed by Engineer-in-Charge. |
| 4 | Demolition of cement concrete (un-reinforced) in ground floors and pavings not exceeding 15 cm thickness below or above ground leveland removal all rubbish material outside of MD Land complete all as specified and directed. |
| 5 | Taking down existing roof treatment including lime concrete / PCC padding over roof, removing complete layer of bitumen under lime concrete / PCC padding, cement mortar& felt cleaning the surface by hacking to receive plaster and removingdemolished material outside MD land complete all as specified and directed. |
| 6 | Demolition of brick work or stone/ boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars etc but excluding ashlar facing dressed stone work and precast concrete articles complete all as specified and directed by Engineer-in-Charge. |
| 7 | Dismantling wrought iron or mild steel work of any description complete all as specified and directed. |
| 8 | Dismantling Asbestos cement (corrugated, semicorrugated, etc.) sheets in roof coverings complete all as specified and directed. |
| 9 | S&F Pre-coated galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 mpa as in roof covering / cladding to wall, fixed with self tapping screws as specified. |
| 10 | S&F Pre-coated galvalume aluminium zinc coating GI based plain steel sheet 0.50 mm thick of an colour having tensile strength of 550 mpa as in roof covering / cladding to wall, fixed with self tapping screws as specified. |
| 11 | S&F0.8 mm thick Plain, galvanised, mild steel sheeting, in ridges, hips, valley gutters, drip and straight flashings (length and girth as fixed) with grade of zinc 275. Complete all as specified & directed. |
| 12 | M&L forRoof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) FE-290 GD-165 including distance pieces, cleats etc. Complete all as specified & directed. |
| 13 | M&L for PCC 1:4:8 type D-2, using 40mm graded stone aggregate in foundation , filling and mass concrete all as specified. |
| 14 | M&L for PCC (1:2:4) type B-0 using 10/12.5 mm graded stone aggregrate laid over roof slab after applying cement slurry for filling undulationations finished even and smooth without using extra cement complete all as spd and directed. |
| 15 | M&L for Rendering 10mm thick on fair faces of brick work or concrete surfaces finished fair and even in CM 1:4 mixed withwater proofing compound (WPC shall be measured seperately). |
| 16 | Supply Integral water proofing compound complete all as specified and directed. |
| 17 | M&L for water proofing treatment with APP modified bituminous membrane 3mm thick consisting of the following for RCC roof:- (a) Cleaning plastered roof surfaces and applying a coat of Oxidised bitumen based solvented primer @0.3 Kg/Sqm of approved make on top of dry surface of RCC roof complete all as specified and directed. (b) M&L for APP modified polymeric waterproofing membrane 3mm thick with non woven polyster core of approved make applied by heating one surface of membrane with LPG torch with lap of 100mm and the overlap shall be seated by flame complete all as per manufacture instructions and as directed. |
| 18 | M &L Cement concrete tiles 25cm x 25cm x 20mm thick, machine pressed; set jointed and pointed in neat cement slurry in floors/roof, and cutincl 20 mm screed bedding layerin CM 1:4 complete all as specified and directed. |
| 19 | M&L for treatment of sunken floor slab comprising of the following specifications with and including demolition of sunken floors complete all as specified and directed:- (i) Cleaning the sunken/lowered portion of \ RCC slab surface (incl vertical total depth plus skirting height) of floors by wire brush,chisel out any mortar sticking to the surface and brooming completely. Provn of 40 mm thick avg PCC 1:2:4 type B-O using 12.5mm graded aggregate as in padding concrete to achieve proper slope incl cutting holes in bricks or RCC wall for sprout. (ii) Rendering of uneven surfaces with 6mm thick CM 1:4 mixed with and incl integral water proofing compound Sika Plastocreat plus or equivalent make in Fosroc / Thermax as approved by GE @ 0.2% by wt of cement consumed incl filling it with water to check dampness and seepage and where dampness/seepage is noticed, nozzles shall be fixed and grouting carried out. Cont/- |
| 20 | Cont/- (iii)All junctions points of side wall where CI/GI/PVC pipes are passing through shall besealed with epoxy puttySikaguard 694 F(I) or equivalent make in Fosroc/Thermax as approved by GE (iv) After drying putty, wash the slab and sides of sunken portion with water and make it clear and clean (v) Applying two coats of polymer modified cementious water proof coating with Sika Topseal 107 or equivalent make in Fosroc/Thremax as approved by GE over base coat as per manufacturer"s instruction to bottom and vertical sides upto finished floor level +100 mm height. The thickness of two layers shall be 1mm. When the second layer is still sticky, coarse sand spray shall be carried for the vetical and bottom surface of the sunken portion. Cont/- |
| 21 | Cont/- (vi) Plaster the bottom surface and sides up to bottom of the skirting with minimum 20mm thick CM 1:4 mixed with and incl integral water proofing compound Sika Plastocreat plus or equivalent make in Fosroc/Thermax as approved by GE @ 0.2% by wt of cement consumed as per manufacturer"s specification incl rounding of corners and injuctions sloping towards spout. (vii) All pipes laid in sunken portion shall be covered with 50mm thick PCC 1:3:6 all round after painting with anticorrosive paint. |
| 22 | Dismantling wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/blankets, any thickness, including cover fillets complete all as specified and directed. |
| 23 | M&L for 4 mm thick E board classic,fibre base cement boards,embosed texture,fixed to aluminium snap grid (Size ofgrid 605 x 605 mm) in ceiling complete all as specified & directed. (Note:- The Aluminium snap grid frame work shall be measured & paid for separately) |
| 24 | S&F Anodised aluminium snap grid frame work for false ceiling complete all as specified& directed. |
| 25 | S&F for Hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete all as specified and directed. |
| 26 | M&L for false ceiling with 10mm thick plaster of paris sheet fixed with machine screws with and including GI channel 18 guage thick grid work, main joist placed at 750 mm centre to centre hanging with 6 mm dia GI wire suspenders from roof, J hook bolts and nuts etc and treating the Gypsum board with thin layer of POP with gypsum anhydrous binder and prepare the surface till smooth surface is achieved and applying two coats of plastic emulsion paint complete all as per manufacturer"s instructions complete all as specified and directed. |
| 27 | M&L decorative cornices/moulings using POP of cross sectional dimension exc 25 Sqcm and not exc 50 Sqcm as per pattern and design as approved and fixed in position including preparation of surface and applying two coats of plastic emulsion paint over a coat of primer matching with the colour of ceiling sheets complete all as specified and directed. |
| 28 | M&L 10 mm thick rendering in cement mortar 1:4 to brick masonry wall surfaces for fixing tiles etc complete all as specified and directed by Engineer - in -Charge. |
| 29 | M&L for glazed ceramic tiles (coloured) 450mm x 300mm x 7mm thick on vertical surfaces such as dado, skirting etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over & including 10mm thick rendering in cement & sand mortar (1:4) including necesary cutting as per site requirment complete all as specified and directed by Engineer-in-charge. |
| 30 | M&L for 25mm thick PCC (1:2:4) type B-0 using 25mm graded stone aggregate) as in sub base of floor and leveling course complete all as specified and directed. |
| 31 | M&L for coloured non skid ceramic tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm as in floors, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over & including 15mm thick screed bed in cement & sand mortar (1:4) complete all as specified and directed by Engineer-in-charge. |
| 32 | M&L for rendering 15mm thick on fair faces of brick work or concrete surfaces of wall finished even and fair in CM (1:4) mixed with water proofing compound complete all as specified and directed. Note: Supply of WPC shall be measured and paid separately. |
| 33 | M&L for rendering 5mm thick in CM (1:4) as on ceiling complete all as specified and directed. |
| 34 | M&L for Brick work with fly ash bricks, straight or curved on plan exc 6m mean radius built in cement mortar (1:6) complete all as specified and directed by Engineer-in-charge. |
| 35 | M&L for 15mm thick rendering in cement mortar (1:6) on fair faced surface of brick masonary, finished even & smooth without using extra cement complete all as specified and directed by Engineer-in-charge. |
| 36 | M&L for 75 mm thick PCC (1:3:6) type C-2 using 40 mm graded crushedstone aggregate as inplinth protection, finished fair and evencomplete all as specified and directed by Engineer-in-charge. Note :- Plinth protection shall be laid to slope (1 in 30) in bays not exceeding 3 metre in length and joints of 6 mm wide and 10 mm deep shall be provided along the wall and bays and same shall be filled with sealing compound grade B. Cost of ceiling compund is included in the unit rate of this item complete all as spcified and directed. |
| 37 | S&F rotational moulded polyethylene water storage tank triple layer of capacity 500 ltr (cylindrical vertical with closed top) hoisted and fixed in position with all necessary GI fittings all as specified in SSR Part-I including dismantling water tank of 500 Ltr capacity with ball valve & nipple complete all as specified and directed. |
| 38 | S&F rotational moulded polyethylene water storage tank triple layer of capacity 750 ltr (cylindrical vertical with closed top) hoisted and fixed in position with all necessary GI fittings all as specified in SSR Part-I including dismantling water tank of 750 Ltr capacity with ball valve & nipple complete all as specified and directed. |
| 39 | S&F 20 mm dia ball brass valve high pressure with polythene float and fly nuts complete screwed for iron pipes or brass ferrule and fixed complete all as specified and directed. |
| 40 | Disconnecting existing tanks Exc 250n exc 500, setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position. (Cleaning repairing, etc. measured separately) |
| 41 | Disconnecting existing tanks Exc 500n exc 1000, setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position. (Cleaning repairing, etc. measured separately) |
| 42 | S&F in repairs chromium plated brass tubular towel rail 20 mm dia, fixed to iron pipe complete all as specified and directed. |
| 43 | Taking up or down 15 mm steel tubingand connections including cleaning for refixing or removal complete all as specified and directed by Engineer-in-Charge. |
| 44 | Taking up or down 20 mm steel tubingand connections including cleaning for refixing or removal complete all as specified and directed by Engineer-in-Charge. |
| 45 | M&L for 15 mm nominal boreMild steel galvanised water tubing, medium grade, with all fittings and fixed complete to walls and ceiling or laid in floors complete all as specified and directed. |
| 46 | M&L for 20 mm nominal boreMild steel galvanised water tubing, medium grade, with all fittings and fixed complete to walls and ceiling or laid in floors complete all as specified and directed. |
| 47 | Fixing only 15mm bore old galvanised steel water tubing including cleaning with & including new fittings and fixed complete to walls and ceilings or laid in floors in new or old position complete all as specified and directed by Engineer-in-charge. Note :- GI tubing retrieved vide item No 41.00 shall be used under this item. |
| 48 | Fixing only 15mm bore old galvanised steel water tubing including cleaning with & including new fittings and fixed complete to walls and ceilings or laid in floors in new or old position complete all as specified and directed by Engineer-in-charge. Note :- GI tubing retrieved vide item No 42.00 shall be used under this item. |
| 49 | S&F in repair PTMT swivel shower rose of any colour with swivel joints including shower arm of 15mm bore, 195 mm long with bend of 45 degree with flanges of PTMT (complete minimum weight 80 grams) complete all as specified & directed by Engineer-in-charge. |
| 50 | S&F in repair 450mm long PVC connection suitable for 15 mm bore with PTMT nuts on both sides complete all as specified and directed by Engineer-in-charge. |
| 51 | S&F in repair 15mm bore angle valve, cast copper alloy, chromium plated, screwed down, high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions complete all as specified and directed by Engineer-in-charge. |
| 52 | S&F in repair 15mm dia stop cock cast copper alloy, fancy type with, chromium plated long shank and cup (concealed type) with crutch or butterfly handle screwed down high pressure, screwed both ends for iron pipe complete all as specified & directed by Engineer-in-charge. |
| 53 | S&F in repairs 15mm bore brass chromium plated wall mixer for mixing hot & cold water screwed down for iron pipe of 15mm bore complete all as specified and directed by Engineer-in-charge. |
| 54 | S&F in repair 20mm bore stop valve, cast copper alloy, screwed down, high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions complete all as specified and directed by Engineer-in-charge. |
| 55 | S&F in repairs 15 mm bore bib tap, cast copper alloy, chromium plated, long body, fancy type screwed down and screwed for iron pipe or for brass ferrule complete all as specified and directed by Engineer-in-charge. |
| 56 | S&F in repair vitreous china squatting pan Orissa pattern, white of size 580x440mm with integral foot rests (excluding flushing cistern and flush pipe) including cast iron "P" or "S" trap, PCC filling and connection to trap and flushing pipe, antisyphonage pipe etc complete all as specified and directed by Engineer-in-charge. |
| 57 | S&F in repairs vitreous china wash down water closet pan (Pedestal pattern), white including connection to drain (or outgoing pipe) and to flushing pipe, anti-sypohonage pipe etc. & with plastic WC seat cover white closed pattern with flat bottom and cover and mild steel chromium plated or aluminized hinging device and jet spray complete all as specified & as directed by Engineer-in-charge. |
| 58 | S&F in repair 10 litre capacity PVC valveless symphonic action type low level flushing cistern (ISI marked) including32 mm dia PVC flush pipeconnected to water closet with inlet, ball valve, float and handle complete all as specified and directed by Engineer-in-charge. |
| 59 | S&F in repair vitreous china wash basin white, flat back of size 550x400mm including including a pair of cast iron brackets embedded in PCC 1:3:6 type C-1 blocks of size 10x 7.5 x15 cm with & including 32 mm dia PVC waste pipe, 32mm dia PTMT waste coupling half or full thread (minimum wt 45 grms) flange end bedded in red lead cement & other end fixed to waste pipe complete all as specified and directed by Engineer-in-Charge. |
| 60 | S&F 75mm dia PVC (SWR) floor trap, plain with gratingincluding jointing with solvent cement including jointing to waste pipe fixed in cement concrete (1:2:4) type B-1 using 20mm graded stone aggregate complete all as specified and directed by Engineer-in-Charge. |
| 61 | S&F 100mm bore pipe cast iron soil and waste and vent pipes centrifugally spun castin any length with or without ears with cement joints laid in trenches or in floors including taking down old unserviceable pipe and fitting complete all as specified and directed. Note :- Cost of Excavation & earthwork, if required is deemed to included to in the unit rate of this items nothing extra shall be paid on this account. |
| 62 | S&F 75mm bore pipe cast iron soil and waste and vent pipes centrifugally spun castin any length with or without ears with cement joints laid in trenches or in floors including taking down old unserviceable pipe and fitting complete all as specified and directed. Note :- Cost of Excavation & earthwork, if required is deemed to included to in the unit rate of this items nothing extra shall be paid on this account. |
| 63 | S&F cast iron bends of 110mm bore any radius complete all as specified and directed. |
| 64 | S&F cast iron bends of 75mm bore any radius complete all as specified and directed. |
| 65 | S&F 75mm bore PVC (SWR) pipes single socketed in any length jointed with adhesive fixed to walls fixed with and including requisite Number of clamps made out of flat iron 25x4mm complete including taking down old unserviceable pipe and fitting all as specified and as directed by Engineer-in-charge. |
| 66 | S&F 110mm bore PVC (SWR) pipes single socketed in any length jointed with adhesive fixed to walls fixed with and including requisite Number of clamps made out of flat iron 25x4mm complete including taking down old unserviceable pipe and fitting all as specified and as directed by Engineer-in-charge. |
| 67 | S&F 110 mm bore PVC (SWR) bends any radius jointed with adhesive complete all as specified and as directed by Engineer-in-charge. |
| 68 | S&F 110mm bore PVC (SWR) junction, single (single T) equal or unequalcomplete all as specified and directed by Engineer-in-Charge. |
| 69 | S&F 75mm bore PVC (SWR) junction, single (single T) equal or unequalcomplete all as specified and directed by Engineer-in-Charge. |
| 70 | S&F 75 mm bore PVC (SWR) bends any radius jointed with adhesive with oval access door complete all as specified and as directed by Engineer-in-charge. |
| 71 | S&F fancy type pillar tap, cast copper alloy with capstan heads, chromium plated, screwed down high pressure, with or without lettered‘Hot’ or ‘Cold’ with long screwed shank & Fly nuts, screwed suitable for iron pipes of 15mm bore complete all as specified and directed by Engineer-in-charge. |
| 72 | S&F in repair fancy type pillar tap, cast copper alloy with capstan heads, chromium plated, screwed down high pressure, with or without lettered‘Hot’ or ‘Cold’ with long screwed shank & Fly nuts, screwed suitable for iron pipes of 15mm bore complete all as specified and directed by Engineer-in-charge. |
| 73 | S&F for repair 32mm Waste fittings, brass, chromium plated for glazed ware wash hand basins, etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed complete all as specified |
| 74 | S&F in repair 32mm dia waste coupling of PTMT (half or full threaded) Minimum weight 32mm-45gms/40mm-60 gms)Ditto but suitable for urinals (Minimum weight 32mm-45gms) |
| 75 | S & f in repair grating round 140 mm size of PTMT. (Minimum weight 50gms) |
| 76 | M&L for preparation of new steel surfaces of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed by Engineer-in-charge. |
| 77 | M&L for preparation of new plastered surfaces and applying two coats ofoil bound distemper over a one coat of primer on walls complete all as specified and directed. |
| 78 | M&L for preparation of new plastered surface and applying three coats of white wash on ceiling complete all as specified and directed. |
| 79 | M&L for preparartion of new plastered surfaces of walls and applying two coats cement base paint on walls complete all as specified and as directed. |
| 80 | S&F in repair PVC bathroom cabinet mirror 450 x 350 mmcomplete all as specified and as directed. |
| 81 | S&F in reapir PVC water tank cover for any capacity of PVC water tank fixed with suitable bolt & nuts complee as directed. |
| 82 | S&F in repair 600 x 450mm bevelled edge mirror 5.5mm to 6mm thick selected quality glass flaw less,firmly mounted on 6mm thick commercial ply wood backing and fixed to wooden plug with chromium plated brass screw and cup washer complete all as specified and directed. |
| 83 | S&F in repair 25 mm dia SS curtain rod withside holders, projecting type clamp etc with necessary all fittings all as specified and as directed. |
| 84 | S&F in repairs Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified. |
| 85 | S&F in repairs PVC flexible waste down pipe-32 mm dia and 1150 mm long with PVC waste coupler complete all as specified and directed. |
| 86 | S&F in repair plastic water closet seat cover, white, closet pattern with flat bottom and cover and mild steel chromoum plated or aluminised hinging device complete all as specified and directed by Engineer-in-Charge. |
| 87 | S&F in repair chromium plated Soap dish approximate size 160x160x90mm including chromium plated brass screws and plastic cleats complete all as specified & directed by Engineer-in-Charge. |
| 88 | S&F in repairs Sheet glass shelf assembly consisting of 5.5mm thick sheeet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified & directed by Engineer-in-Charge. |
| 89 | S&F in repair Toilet paper holder with flat recessed type stainless steelcomplete all as specified and directed by Engineer-in-Charge. |
| 90 | Cleaning and removing all scale and dirt, etc. from PVC/RCCtanks Exc250 but not exc 500 ltr capacityand form mouths of circulating pipes, complete all as specified and directed by Engineer-in-Charge. |
| 91 | M&L for preparation of old treated surfaces of ceiling and applying one coat of white wash complete all as specified and directed. |
| 92 | M&L for preparation of old distempered surfaces of walls by washing, rubbing down and stopping of distempered and painted surfaces and treating oil and greasy spots and applying one coat of oil bound distemper oil emulsion white or tinted completeall as specified and directed. |
| 93 | M&L for preparation of old painted wooden surfaces of any description over 10 cm width or girth and applying one coat of synthetic enamel paint, completeall as specified and directed. |
| 94 | M&L for preparation of old steel surfaces of any description or girth over 10 cm width or girth and applying one coat of synthetic enamel paint, completeall as specified and directed. |
| 95 | M&L for preparation of old plaster surfaces of walls and applying one coat of cement based paint on wallscomplete all as specified and directed. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
