Bhabha Atomic Research Centre-BARC has published Tender For Construction Of 2Nos Of Tennis Court At Barc Staff Colony Tarapur. Submission Date for this Tender is 04-05-2024. Building Work Tenders in tarapur Maharashtra. Bidders can get complete Tender details and download the document.
| Sl. No. | Item Description |
| 1 | Earth work excavation by mechanical means (Hydraulic excavator) / manual means in all types of soil other than soft and hard rock, dressing the sides of foundation, ramming of bottom etc. including shoring and dewatering (if necessary) and refilling with selected excavated earth in layers of not more than 500 mm thick, each layer well rammed and consolidated including disposing the surplus earth within a distance of 200 m all as per specifications including clearing Jungle, uprooting of vegetation, grass, etc. complete andas directed by the Engineer-in-charge(a) From 0.00 to 1.50 m depth from Average Ground Level |
| 2 | Extraover initial depth for every additional Depth of 1.50 m or part thereof in all kinds of soil |
| 3 | Lead charges for 1st 1 KM or part thereof, by mechanical transport including loading unloading, stacking / levelling etc. |
| 4 | Soil |
| 5 | Providing and laying in position cement concrete of 1:2:4 (1 cement, 2 crushed sand, 4 graded stone aggregate of nominal size 20 mm) including consolidation, finishing, curing etc. complete as per specification and drawingsbut excluding the cost of Formworkshuttering, centering and steel reinforcement at all Levels |
| 6 | Supplying, stacking and laying of 230 mm thickrubble soling stones as under floor baseincluding packing with smaller stone and compacting, ramming including spreading and consolidation of blinding material, moorum etc. complete all as per specifications and as directed by the Engineer-in-charge (230mm With outside material). |
| 7 | Murum fillingunder floors of specifiedthickness in layers ofnot more than 150 mm thickness including supplying required materials andconsolidation etc. complete (Murrum to be brought from out side campus of BARC) |
| 8 | Providing and laying in position Reinforced CementConcrete (RCC) of grade M-30 using 20mm maximum size aggregates and crushed sand of approved quality including admixtures of approved brand and quality (plasticiser or super plasticiser) if required, including weigh batching,mechanical mixing, transporting, placing, vibrating, consolidation, finishing, curing etc. complete but excluding the cost of centering, shuttering and reinforcement complete as per specificationsup to Plinth Level. |
| 9 | In sub-structure (up to plinth level) |
| 10 | In super-structure (above plinth levelup to 20 m height.) |
| 11 | Providing , centering ,shuttering Form work using PVC film facedplywood to get a neat form finish surface for all types of structures including necessary strutting, proping, staging, supports etc and deshuttering the same after the specified time all as per drawings, specifications and as directed by the Engineer-in-charge at all levels |
| 12 | For Sub Structure |
| 13 | For Super structure |
| 14 | Providing Reinforcement Steel for reinforced cement concrete at all levels including supplying, preparation of bar bending schedules, cutting, bending, transporting, fixing, tieing in position with PVC coated G.I binding wire, all labour charges, cost of cover blocks in specified grade of concrete etc. complete as per specifications and drawings. Steel supplied by the contractor |
| 15 | Upto and including 32mm dia reinforcement: Using TMT bars of specified grades. TMT bars to be supplied by vendors as per Approved Vendor list of BARC using virgin materials |
| 16 | Providing Structural steel work using angles, channels, joists and other sections, welded and / or bolted in built up sections for trusses , structural steel floors, frame works, monorails and other structures including supplying, cutting, welding, fabricating, hoisting, fixing in position, applying a priming coat of approved steel primer etc. complete all as per specifications, drawings and as directed by the Engineer in charge |
| 17 | Up to and including 300 mm Joists, 350 mm channels, and below sections using materials from Approved vendor of BARC. |
| 18 | Providing Structural steel work in M.S Plain Plates and chequered Plates for Embedded Parts,Trench Covers, Connection plates etc. Including cutting, hoisting, fixing in position and applying a priming coat of approved zinc chromate steel primer etc. Including cost of structural steel Plates, welding all labour charges etc. complete as per drawings and specifications. Using materials produced by vendors as per Approved Vendor list of BARC using virgin materials |
| 19 | Providing and fixing anodized aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections / Z sections and other sections of approved make conforming to IS 733 and IS 1285 fixed with rawl plugs and screws or with fixing clips or with expansion hold fastners including necessary filling up of gaps at junctions, at top, bottom and sides with required PVC / neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically whereever required including cleat angle, aluminium snap beading for glazing / panelling, C.P brass / stainless screws all complete as per drawings and and directions of Engineer-in-charge including providing and fixing hinges / pivots and making provision for fixing of fittings wherever required including the cost of PVC / neoprene gasket required filling the gaps using silicon grout sealent etc. (fittings glazing and panelling shall be paid for separately) |
| 20 | Anodised Aluminium sections (Minimum anodizing thickness of 15 micron) |
| 21 | Extra for colour anodizing |
| 22 | Providing and fixing glazing in aluminium doors, window, ventilator shutters and partitions etc with PVC / Neoprene gasket etc. complete as per the architectural drawings and directions of the Engineer-in-charge (Cost of snap beading shall be paid in basic item) |
| 23 | With tinted colourfloat glass panes of 5.0 mm thickness |
| 24 | Providing and constructing brick workin cement mortar using Standardbricks of approved quality / class, make / brandin super structure above plinth up to Floor-II level in all shapes and sizes including curing, raking out jointscomplete as per specifications and as directed by the Engineer-in-charge |
| 25 | Brickwork in super structure with standard bricks in C.M 1:4 using crushed Sand |
| 26 | Providing20 mm thick plastering using Ready mixexternal plastering compound ofapproved make for external faces of brickwork / concrete surfaces including preparation of the surface, curing, cleaningscaffoldingup to 10 metres height complete.all as per specifications including forming drip moulds wherever necessary and as directed by the Engineer-in-charge |
| 27 | Providing 15mm thick plastering using Ready mix internal plastering compound of approved make for internalfaces of brickwork / concrete surfaces including preparation of the surface, curing, cleaning, scaffolding completeall as per specifications and as directed at site by the Engineer-in-charge |
| 28 | Providing cement based water proofing treatment to the new terraces, chajjas, cleaning the concrete surfaces, giving injections to the top slab as required with cement and approved waterproofing compound solution to fill up all inherient holes, voids, honeycombs etc. in the concrete slab, setting brickbat coba in waterprrof mortar with necessary gradient for easy flow of water and continue the treatment along the inner faces of parapet or other adjoining wall up to a height of 300 mm in thew shape of vattas, with waterproof plaster finished smooth with trovel in cement / geru with false markings of 300 mm squares complete as directed by the Engineer-in-charge |
| 29 | With Average thickness of 120 mm and minimum thickness atkhurra as 65 mm using river sand / crushed sand |
| 30 | Average 65 mm thick for chajjas using river sand / crushed sand |
| 31 | Providing, applying and finishing walls with two coats of premium fine textured exerior paint of required shade over new work including base coat of water proof cement paint,preparation of the surfaces, scaffolding complete. as per specifications and as directed by the Engineer-in-charge |
| 32 | On Plain plastered / concrete sufaces |
| 33 | Providing and applying white cement based wall putty of approved make over concrete or Plastered surfaceup to 3 mm thickto get uniform surface free from undulationincluding cleaning complete all as directed by the Engineer-in-charge |
| 34 | Providing and painting with two coats with oil bound distemper of approved make and manufacturer over new work to give an even approved shade and including priming coat with one coat of cement primer including preparation of sufaces, filling with putty if required, scaffolding complete as per specifications and as directed by the Engineer-in-charge. |
| 35 | Providing and Painting twocoats of synthetic enamel paint on steel surfaces of approved brand and manufacture to give an even shade over aprimer coat.including preparation of the surfaces, scaffolding complete. as per specifications and as directed by the Engineer-in-charge |
| 36 | Providing and fixing minimum 17 mm thick gang saw cut mirror polished granite (premoulded and prepolished) machine cut ZEBRA BLACK colour granite for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, colour and texture laid over 20 mm thick base cement mortar 1:4 (using crushed sand) with joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing the edge to give high gloss finish etc. complete as directed by the Engineer-in-charge at all levels |
| 37 | Providing and fixing GI chain link fabric fencing Made of GI wire of dia 4 mm of required width in mesh size 50 x 50 mm including strengthening with 2mm dia wire or nuts, bolts and washers as requeid complete as per direction of Engineer-in-charge. |
| 38 | Providing and fixing 1st quality ceramic glazed floor tiles of minimum 300 - 600 mm long and 300 - 600 mm wide and thickness not less than 6 mm conformingo IS 15622 of approved make in all colours and shades as approved by Engineer-in-charge over a bed of 20 mm thick bed of cement mortar 1:4 (using crushed sand) and jointing with grey cement slurry including pointing with white cement based Tile grout of approved make and matching shade complete as per patterns, drawings and specifications complete as directed by the Enginner-in-charge |
| 39 | Providing and fixing 1st quality ceramic glazed wall tiles conforming to IS 15622 of approved make. shade andcolour of size ranging from300 - 600 mm long and 300 mm - 600 mm wide and thickness not less than 6 mmas approved byEngineer-in-charge in skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1:3 (using crushed sand), setting the tiles in cement slurry and pointing the joints withmatching colour Tile grout of approved make of matching shade including using PVC tile trim in the exposed corners, complete as per drawings, patterns and specifications complete as directed by the Engineer-in-charge. |
| 40 | Providing and fixing Glazed VITRIFIED floor tiles of approved make in different sizes conforming to IS 15622 inall colours and shades in Glossy or Matt or satin finishlaid over a bed of minimum20 mm thick bed of cement mortar 1:4 (using Crushed sand) and jointing with grey cement slurry including grouting with the joints withwhite cement based Tile Grout of approved make and matching shade complete as per patterns, drawings and specifications complete as directed by the Engineer-in-charge |
| 41 | Using Tiles of size 600 X 600 mm |
| 42 | Providing and fixingG.I. chicken mesh in the junctions of concrete & brick work / masonry or as directed by the Engineer in charge including cutting, fixing with nails in position before plasteringcomplete all as directed by the Engineer-in-charge. (only area of the chicken mesh used alone will be measured) |
| 43 | Providing and constructioning Inspection chambers of Internal size clear dimention of 900 x 600 mm in 230 thick brick masonry with cement mortat 1:4over a bed of 150 mm thick 1:4:8 cement concrete foundation, plastering with cement mortar 1:4 20 mm thick on inside, out side and all exposed sufaces finished with a floating coat of neat cement, brick corbelling at top to provide opening of 900 X 450 mm, embedding the frame and cover with CC 1:2:4 concrete, and fixing cast iron steps if necessary at 300mm intervals complete . Depth of chamber not exceeding 900 mm. (excavation, soling, cast iron cover and C.I steps will be paid separately under relevant item) |
| 44 | Supplying and fixing Cast IronMan hole or Cast Iron Steps cover of approved make and weight as specified in the drawings or as directed by the Engineer in charge. |
| 45 | Providing and laying non pressure NP2 classRCC Hume pipes of approved make, with collars jointed with stiff mixture of cement mortar in the proportion of 1:2, laying to the levels, slopes and as per the drawings and specifications and as directed by the Engineer-in-charge including testing of joints etc. complete. |
| 46 | 150 mm Dia RCC Hume pipe class Np2 |
| 47 | Providing, supplying, fixing in position in walls Rain water down take pipes usingCentrifugally cast iron pipes (3.00 metres long) including required specials like bends, shoes etc forRain water down takepipes Confirming to IS.3989 of approved make including cost of Jointing with spun yarn and molten lead of specified quantity, caulking the joints, including testing of pipes,painting with primer , fixing at walls with necessary approved type of clamps and brackets complete all as per drawings and specifications and as directed at site. |
| 48 | 100 mm C.I rain water down take pipe with 1.00 kg lead / joint conforming to relevant IS |
| 49 | Providing and fixingFRPdoor shuttersflush door / panelled type with plain colour or wooden veneer finish of approved make, design & colour. made out of 1.5 mm thick FRP skin moulded over wooden frame work of 40 mm wide and required thickness wooden styles and minimum100 mm wide lock rails and wooden blocks for door stoppers, tower bolts, baby latch, aldrop, handles etc. wherever required and core filled with Polyurethane Foamand fixing with 4 Nos 100 mm (ISI marked) stainless steel hinges with S.S. wood screws |
| 50 | 35 mm thick panelleddoor type of approved coloursincluding the cost of 100 mm ISI marked heavy quality stainless steel butt hinges with necessary screws. |
| 51 | Providing and fixing aluminium aldropsof size 250 X 16 mm ISI marked anodised transparent or dyed to requried colour or shade with necessary screws, bolting from rear side complete as per specifications and as directed by the Engineer-in-charge |
| 52 | Providing and fixing stainless steeltower bolts of size 300 X 12 mm of approvedmake with necessary screws etc. all as per specifications and as per drawings. |
| 53 | Providing and fixing anodisedaluminium baby latch of size 75 X 12 mmISI marked of approved make transparent or dyed to requried colour or shade with necessary screws etc. |
| 54 | Providing and fixing aluminium handles175 mm long Inner grip 125 mm with 12 mm dia rod plate type BOW handles ISI marked of approved make, anodised transparent or dyed to req. colour or shade with necessary screws etc. complete. |
| 55 | Providing and fixing aluminium hanging heavy qualityfloor door stopperISI markedwith twin rubber stoppers, anodised transparent or dyed to required. colour or shade with necessary screws etc. complete. |
| 56 | Providing and fixing white vitreous china European type Water Closetwith "P" or "S" Trapwith solid seat and lid of approved make, 10 litre low level white PVC flushing cistern with manually controlled device (handle lever) conforming to IS:7231,flush bend, fixing EWC with C.P brass screws, 15 mm PVC heavy quality inlet connection of 450 mm long, including testing , commissioning & cleaning etc.complete all as per drawings and specifications and as directed by the Engineer-in-charge |
| 57 | E.W.C. pan in White colourwith ISI marked white solid plastic seat and lid. |
| 58 | Providing and fixing viterious China wash basin of approved make and colour with C.I. brackets, 15 m C.P. brass pillar tap of approved make,15 mm x 600mm longPVC Inlet connection,32 mm heavy quality C.P. brass waste couplingof standard pattern, including painting of fittings and brackets, cutting and making good the walls and testing complete all as per specifications and as directed by the Engineer-in-charge |
| 59 | White vitreous China wash basin size 630 x4 450 mmand equivalent sizes with single 15 mm C.P. brass pillar tap |
| 60 | Providing and fixing 6 mm thick mirrors of size600 x 450 mm of approved make with bevelled edges complete with 6 mm thickasbestos sheet back ground fixed to wallswith C.P. brass screws and concealedwashers complete. all as per specifications and as directed by the Engineer-in-charge . |
| 61 | Providing and fixing Euronics Liquid soap Dispenser-ES-04 complete. all as per specifications and as directed by the Engineer-in-charge |
| 62 | Providing and fixing C.P brass towel rail of approved make 600 mm long complete fixed to walls with 30 mm CP brass screws with concealed fitting arrangement all as directed by the Engineer-in-charge. |
| 63 | Providing and fixing stainless steeltoilet paper holderrecessed type of approved make and type withS.S screws as directed by the Engineer-in-charge complete. |
| 64 | Providing, supplying and fixing JET spray with 1.00 metre long flexible tube connection in European / Anglo Indian closet under seat cover fixtures complete all as specified and as directed by the Engineer-in-charge |
| 65 | Providing and fixing cast iron nahani trap / floor trap of 100 mm inlet and 75 mm outlet, (weighing 5.80 Kg each), jointing with lead with the connection pipes, placing as per the drawings, embedding in cement concrete 1:2: 4 and making circular hole up to floor level using 110 mm O/D PVC pipes of 6 Kg / sq.cm pressure and fixing 1 No 125 mm dia C. P brass grating ,complete all as specifications and drawings and as directed by the Engineer-in-charge |
| 66 | Providing and fixing C.P brass bib cock of heavy quality of specified / approved makeas per specifications and as directed by the Engineer-in-charge |
| 67 | 15 mm diabib cock of approved type and make . |
| 68 | Providing and fixing C.P Brass open stop cock of Heavy Quality of specified / approved makeas per specifications and as directed by the Engineer-in-charge |
| 69 | 15 mm n.b CP Brass open stop cock of approved make and type |
| 70 | Providing and fixing white vitreous china flat back half stall urinal size 580x380x350 mm / 610 mm of approved make Aquaseal model with Push cock of approved make,with CP brass flush pipe unions, heavy quality C.P. brass spreaders, C.P waste coupling with dome grating, clamps complete all as per specificationsdrawings and as directed by the Engineer-in-charge. |
| 71 | Providing ,Laying , jointing, fixing and testing Heavy quality (C-Class) Galvanised Iron pipes and ISI marked fittings like, tees, elbows, bends, unions, nipples,reducers etc. as required for the work, including testing the pipes and fittings for 10.00 Kg / Sq.Cmhydralic pressurewith a minimum period of two hours duration with clean water, including cutting , threading, jointing with hemp yarn, white lead, jointing Teflon tape, exposed / concealed by chasing walls and making good by filling with concrete 1:3:6, complete all as per specifications and drawings, including two coats of anti corrosive bitumastic paintfor all concealed lines / two coats of synthetic enamel paint for all exposed lines all as directed by the Engineer-in-charge. Pipes with exclusive use of TATA make C-Class pipes. |
| 72 | 15 mm dia G.I pipe |
| 73 | 20 mm dia G.I pipe |
| 74 | 25 mm dia G.I pipe |
| 75 | 32 mm dia G.I pipe |
| 76 | 40 mm dia G.I pipe |
| 77 | Providing, supplying, fixing in position, under floors or in walls sand cast iron pipes including required specials like bends, tees, "Y" collars, cowl etc for soil, waste and ventilation pipes conforming to IS.1729 of approved make including cost of jointing with spun yarn and molten lead of specified quantity, caulking the joints, including testing of pipes, painting with primer, fixing at walls with necessary approved type of clamps and brackets complete all as per drawings and specifications and as directed at site. |
| 78 | 75 mm dia sand cast iron S&S pipe as per IS:1729 with 0.90 kg lead / joint |
| 79 | Providing & fixing in position heavy pattern screw down gun metal gate valve with handles and wheels of approved make including testing for 10Kg/cm2 pressure with clean and potable water with a minimum testing duration of two hours etc.as per specification and as directed by the Engineer-in-charge |
| 80 | 15 mm n.b |
| 81 | Providing and fixing square mouth S.W. gully trap complete with CI grating brick masonry chamber with water tight CI cover with frame of 300 x 300 mm size (inside) the weight of cover to be not less than 4.5 kg and frame to be not less than 2.70 kg as per standard design |
| 82 | 150 x 100 mm size gully trap "P" type |
| 83 | Supplyingand fixing CI cover 300 x 300 mm without frame for gully trap (standard pattern) the weight of cover to be not less than 4.5 kg |
| 84 | Making connection of distribution branch with G.I main of 25 to 40 mm nominal bore by providing and fixing tee including cutting and threading the pipes etc. complete as per specifications and as directed by the Engineer-in-charge |
| 85 | Making connection of drain or sewer line with existing manhole including breaking into and making good the walls, floors with cement concrete 1:2:4 mix cement plastered on both sides with cement mortar 1:3 finished with a floating coat of neat cement and making necessary channels for the drain etc. complete. |
| 86 | For pipes 100 to 230 mm diameter |
| 87 | Providing, hoisting and installing at required elevation moulded HDPE cylindrical vertical water storage tanks of approved make of the following capacities with suitable S. M. Ccover at top including the cost of labour for making hole in the storage tank for inlet, outlet, scour and overflow, providing and fixing necessary G.I Nipples ranging from 15 mm to 50 nn n.b of average150 mm length with double check nuts, washers etc. complete as directed by the Engineer-in-charge |
| 88 | HDPE CYLINDRICAL vertical storage water tank 2000 lit capacity |
| 89 | Providing & fixing ofsocket type post made of 80*80 mmMS pipe with special internal ratchet system for tightening of rope , the ratchet enables perfect tension control of the net with branded Garware Net , epoxy painted. Warranty - 1 years againts Manufacturing Defects.as specified and as directed by the Engineer-in-charge |
| 90 | Supply and instalation of ITF certified 8 layers acrylic system with thickness upto 3mm. The flooring should be certified by international Tennis Federation (ITF) and should have application as first layer of primer (100 % acrylic latex based emulsion to improve bond of acrylic court system to the asphaltsurface having consumption ratio of 0.014 kg/sqft), second layer of acrylic Resurfacer (filling and smoothing asphalt or concrete surfaces in preparation for Acryflex T teniss court system. And also fills the surface chips, voids and conceals repairs while providing a smooth surface for color coating, it should have a consumption ratioof 0.046 kg/sqft), third and fourth layer of precoat ( Quartz filled 100% acrylic latex based textured tennis coat with total consuption of ratio 0.078 kg/sqft) and fifth layer of topcoat (100% acrylic latex polymer & color coat for the finished surface to protect from UV. It should have consuption ratio of 0.023 kg/sqft). on top of this 5 layers , the line marking should be done with overline paint (100% acrylic latex based high hiding line paints. it should have consumption ratio of 4 kg/court). The acrylic surfacer must have silica and infill to be embedded into it with consumption ratio of 0.065 kg/sqft. The product must be approved/licenced/preferred by the respective international sports federation & used at the India/Internantional Championships recognized by the respective Regional/International Sports Federation.Warranty - 1 years againts Manufacturing Defects.as specified and as directed by the Engineer-in-charge |
| 91 | Providing and laying, spreading and compacting granular sub-base (GSB) material 300 mm thick (150 mm thick in each layer) compacted layer of crushed sand, murrum, gravel crushed stone and combination there of as per specification including spreading on the prepared sub grade, maintaining the required slope and grade and cross fall (camber) etc. complete as directed by the Engineer-in-charge (Compacted thickness only will be measured and paid for.) |
| 92 | Providing and Constructing 75 mm thick Modified Penetration Macadam (MPM) Road surface including all materials, spreading 40 mm. stone layers metal 100% crusher broken metal with conical crusher plant, heating and spraying the bitumen of VG-30 Grade @ 2 Kg./Sq.m. spreading 12 mm. size chips compacting with three wheel statick roller having weight of 8 to10 MT. Complete , excluding the cost of applying tack coat. On existing bitumen surface.as specified and as directed by the Engineer-in-charge |
| 93 | Providing and applying prime coat with bitumen emulsion on prepared surface of granular Base including cleaning of road surface and spraying , prime at the rate of 0.75 Kg/ Sq.m using mechanical / manual means.as specified and as directed by the Engineer-in-charge |
| 94 | Providing laying bituminous macadam of thickness 50 to 75 mm as directed on prepared surface with spcified graded crushed stone aggregate for profile corrective base / binder course including loading of aggregate with FE loader, hot mixing of stone aggregates and bitumen in hot mix plant, transporting the mixed material by tippers to paver and laying the mixed material with paver to the requied level and grade and rolling with road rollers, as per specification to achieve the proper compaction but excluding the cost of primer / tack coat with bitumen of 60/70 grade (VG 20) @ 3.5% (percentage by weight of total mix) |
| 95 | Providing and applying tack coat using hot straight run bituumen of grade 60/70 (VG 20) including heating the bitumen, spraying the bitumen mechanically / manually, cleaning and preparing the existing road surface as per specifications On bituminous surface @ 0.50 kg / sqm |
| 96 | Providing and laying dense bituminous concrete of thickness 25 to 40 mmas directed on prepared surface with specified graded stone aggregate for wearing course including loading of aggregate with FE loader and hot mixing of bitumen with filler and stone aggregate in hot mix plant transporting the mixed material by tippers to paver and laying the mixed material with mechanical paver finisher fitted with electronic sensing device to the requied level and grade and rolling with road rollers, as per specification, to achieve proper compaction but excluding cost of primer / tack coat with bitumen of grade 60/70 (VG 20) @ 7% (percentage by weight of total mix) |
| 97 | Providing and laying seal coat average 9.00 mm thiclness of premixed fine aggregate (passing 2.36 mm and retained on 180 micron sieve) with bitumen using 128 kg of bitumen of grade 60/70 (VG 20) bitumen per cum of fine aggregate and 0.60 cum of fine aggregate per 100 sqm of road surface including rolling and finishing with road roller all complete. |
| 98 | Supply, installation and Guarantee of 1.1KV grade, FRLS PVC insulated wire of following size and laying through casing caping or pulling through conduit pipe safely with out any joint in wire.All wires should be confirm IS:694 with latest amendments. (Red/Yellow/Blue, Black, Green colour ) Make: Polycab/RR Kable/Finolex |
| 99 | Supply and Guarantee of 1.5 mm², flexible Multistrand single core copper wire |
| 100 | Installation |
| 101 | Supply and Guarantee of2.5 mm², flexible Multistrand single core copper wire |
| 102 | Installation |
| 103 | Switch boxes Supply, installation of Modular Concealed type switch boxeswith cover plated of following sizes for installation of plate type switches/sockets/Regulators etc. Make: Legrand, Model: Arteor equivalent. |
| 104 | 12 module box with Cover Plate 12 module box equivalent to code no.689012 of LEGRAND 12 module cover Plate equivalent to code no.575790 of LEGRAND |
| 105 | 4 module box with Cover Plate 4 module box equivalent to code no.689031 of LEGRAND 4 module cover Plate equivalent to code no.575760 ofLEGRAND |
| 106 | 3 module box with Cover Plate 3 module box equivalent to code no.689008 of LEGRAND 3 module cover Plate equivalent to code no.575720 ofLEGRAND |
| 107 | 2 module box with Cover Plate 2 module box equivalent to code no.689007of LEGRAND 2 module cover Plate equivalent to code no.575710ofLEGRAND |
| 108 | Controlling switch & socket Supply Installation ,testing and commissioning ofelectrical control switche/socket/Regulator etc of following rating on existing terminal boxes Make: Legrand, Model: Arteor or equivalent. |
| 109 | 20 A switch |
| 110 | 6/16 A socket |
| 111 | 6 A switch |
| 112 | 6 A socket |
| 113 | Fan Regulator 450W electronic type step fan regulator |
| 114 | Blank Plate for switch board |
| 115 | Lighting Fixtures Supply Installation ,testing and commissioning of following lighting fixtures with all control accessoriesincluding interconnection from existing boxes.Make - Philips/ Helonix/Bajaj . |
| 116 | 12 Watt LED Square surface mounting fittings with driver unit. |
| 117 | 36 Watt LED Recess/surface mounting LED flat panel fittingalong with driver unit. |
| 118 | LED Outdoor light fitting : 25 Watt LEDfittingalong with driver unit. |
| 119 | Ceiling Fans Supply Installation, testing and commissioningof high speed 1200mm sweep, ceiling fan with double ball bearing including concield fan hook box operate on 230V , 50Hz, AC supply, conforming to relaventIS as per tender specification. Make: Crompton/Usha/Orient, Model: HighSpeed |
| 120 | Exhaust Fan Supply Installation, testing and commissioning of 200mm sweep, High speed, PVC body, Automatic operated shutter Exhaust fan operate on 230V , 50Hz, AC supply, conforming to relaventIS. Make: Crompton/Bajaj/Luminous |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
