Tender For 33399345 300697395 Fastener,Bolt,Fdn-T,M56x2660mm,Cs,10.9, Hazira-Gujarat

Tender For 33399345 300697395 Fastener,Bolt,Fdn-T,M56x2660mm,Cs,10.9 33399345 0001 0001 300697395 FASTENER,BOLT,FDN-T,M56X2660MM,CS,10.9 Technical Details Name : Leo Arockiaraj Contact : Email : leo.arockiaraj@amns.in 40 NO FASTENER,BOLT TYPE : FOUNDATION-T , DIAMETER : 56 MM , THREADS : METRIC LENGTH : 2660 MM , THREAD LENGTH : FULL THREADED MATERIAL : CARBON STEEL , GRADE : 10.9 DIMENSION STANDARD:DIN 7992 Item Details : Below test reports need to be submitted for Dispatch Clearance/GRN QC 1# Dimensional inspection report 2# Physical(Mechanical)property material test certificate (TS,Elogation) <(>&<)> Impact Value Test Certificate and Forging Test Certificate. (from NABL approved lab) 3# Chemical property material test certificate(from NABL approved lab) 4# Liquid Penetrant Test (LPT) report 5# Ultrasonic Test report (SA388 Standard,Acceptable Criteria DIA. 2MM or 3MM DGS/FBH) (from NABL approved lab). 6# Heat Treatment Process Report (QT) or Graph <(>&<)> Hardness (32-39 HRC) Test Certificate.(from NABL approved lab) 7)Raw material should be Forged 42CrMo4+QT to achieve 10.9 CLASS Grade. 8)As per DIN 7992 Standard , 10 mm width x 10 mm depth Notch to be made in tail end of bolt (with reference to the longitudinal direction of T Head) Item Note : 2 33399345 0002 0002 300862875 WSHR,MTLC,FLAT,AS,100MM,58MM,11MM Technical Details Name : Leo Arockiaraj Contact : Email : leo.arockiaraj@amns.in 35 NO WASHER,METALLIC TYPE, DESIGN:PLAIN/FLAT , MATERIAL:ALLOY STEEL , GRADE:10 OUTSIDE DIA/SIZE:100 MM , INSIDE DIA:58 MM , THICKNESS:11 MM TO FIT SHAFTBOLT DIA:56 MM ADDITIONAL INFORMATION:DIMENSION STANDARD SN808 Item Details : Below test reports need to be submitted for Dispatch Clearance/GRN QC 1# Dimensional inspection report 2# Physical(Mechanical)property material test certificate (TS,Elogation) (from NABL approved lab) 3# Chemical property material test certificate(from NABL approved lab) 4# Liquid Penetrant Test (LPT) report 5# Ultrasonic Test report (SA388 Standard,Acceptable Criteria DIA. 2MM or 3MM DGS/FBH) (from NABL approved lab). 6# Heat Treatment Process Report (QT) or Graph <(>&<)> Hardness (32-39 HRC) Test Certificate.(from NABL approved lab) 7)Raw material should be Forged 42CrMo4+HT to achieve 10 CLASS Grade.

Refer document

Refer document

Refer document