Urban Improvement Trust-UIT has published Tender For Road Furniture Work In Division-I-A Area (Arc). Submission Date for this Tender is 02-05-2024. Road furniture Tenders in kota Rajasthan. Bidders can get complete Tender details and download the document.
| FileName | File Description | File Size |
| 78410004-5972-4605-bae5-71799d91da89.html | Tender Notice | 0 KB |
| BOQ_695042.xls | Tender Document | 0 KB |
| Special_Condition_9.pdf | Tender Document | 0 KB |
| Tendernotice_1.pdf | Tender Document | 0 KB |
| Sl. No. | Item Description |
| 1 | Providing and fixing of retro-reflectorised cautionary, mandatory and informatory sign as per IRC:67 made of high Intesity grade sheeting vide clause 801.3 , fixed over aluminium sheeting, 1.5 mm thick supported on a mild steel angle angle iron post 75mm x 75 mm x 6 mm firmly fixed to the ground by means of properly designed foundation with M-15 grade cement concrete 45 cm x 45 cm x 60 cm , 60 cm below ground level as per approved drawing |
| 2 | 90 cm equilateral triangle |
| 3 | 60 cm equilateral triangle |
| 4 | 60 cm circular |
| 5 | 80 cm x 60 cm rectangular |
| 6 | 60 cm x 45 cm rectangular |
| 7 | Providing and erecting direction and place identification retro-reflectorised sign as per IRC:67 made of high Intesity grade sheeting vide clause 801.3 , fixed over aluminium sheeting, 2 mm thick with area not exceeding 0.9 Sqm supproted on a mild steel single angle iron post 75 x 75 x 6 mm,2 Nos, firmly fixed to the ground by means of properly designed foundation with M-15 grade cement concrete 45 cmx 45 cm x 60 cm , 60 cm below ground level as per approved drawing |
| 8 | Providing and laying of hot applied thermoplastic compound 2.5 mm thick including reflectorising glass beads @ 250 gms per sqm area, thickness of 2.5 mm is exclusive of surface applied glass beads as per IRC:35 .The finished surface to be level, uniform and free from streaks and holes. |
| 9 | Painting with enamel paint of approved brand and manufacture to give an even shade : two or more coats on new work. |
| 10 | Painting with enamel paint of approved brand and manufacture to give an even shade : One or more coats on old work |
| 11 | Supply of ‘L’ type bollard made out of 1.25mm thick MS sheet height 134cm welded in circular type ring section having upper dia 15cm and lower dia 21 cm with another attachment of 15×15 cm circular section with 15cm face plate and hold fast at bottom whole body is processed in white stoving enamel and red reflective 3 hands, each of 7.5cm end one reflective sheet of 15cm dia provided to it complete in all respect. |
| 12 | S & FCC 1:2:4 (M -15) Precast kerb on dand upto 60 cm length over 20 mm thick base of cement mortar 1:6 including jointing, earthwork painting and jointing with cement mortar 1:4 of size 15x40 cm |
| 13 | Raised Pavment Marker ( Cats Eyes): Supplyingand Fixing of Molded Shank Raised Pavement Markers made of polycarbonate and ABS moulded body and reflective panels with micro prismatic lens capable of providing total internal reflection of the light entering the lens face and shall support a load of 16000 kg tested in accordance to ASTM D 4280 Type H and complying to Specifications of Category A of MORTH Circular No RW/NH/33023/10-97 – DO III Dt 11.06. 1997. The height, width and length shall not exceed 50 mm, 100 mm and 100 mm and with minimum reflective area of 13 Sqcm on each side and the slope to the base shall be 35 +/- 5 degree. The strength of detachment of the integrated cylindrical shanks, (of diameter not less than 19 +/- 2 mm and height not less than 30+/- 2 mm) from the body is to be a minimum value of 700 Kgf. Fixing will be by drilling holes on the road for the shanks to go inside, without nails and using epoxy resin based adhesive as per manufacturer’s recommendation and complete as directed by the engineer. The contractor shall submit 2 years pre qualified warranty certificate from the manufacturer for satisfactory field performance during the time of bid submission |
| 14 | Providing and applying tack coat on the prepared surface, with bitumen emulsion as per IS:8887 & manufacturer’s specifications @0.2 kg/sqm with a self propelled or towed bitumen pressure sprayer equipped for spraying the material uniformly at specified rates and temperatures (including cleaning of road surface) as per MoRTH specification Cl. 502, 112. |
| 15 | Providing and laying bituminous macadam on prepared surface with specified graded crushed aggregates as per Table 500-7, grading-2 for base/binding course including loading of aggregate with F.E. loader and heating & mixing of stone aggregate and bitumen (including cost of anti-stripping compound , wherever required) in hot mix plant (40-60 TPH), transporting the mixed material in tipper to paver (sensor as per cluase 504.3.5), and laying mixed material with paver finisher to the required levle and grade rolling by power roller and vibratory compactor as per Cl 501.6 & 501.7 to achieve the desired density (approved by the department )excluding cost of primer /tack coat. [ Morth Speficiation : Clause 504, 112] with all lead & lift : 50/70 mm compacted thickness with 3.3% bitumen VG 30 grade |
| 16 | Providing and laying 20 mm thick Mix Seal Surfacingon a prepared surface in a single course composed of specified close graded crushed stone aggregates (as per table 500-19 premixed with bituminous binder (including cost of antistripping compound, wherver required). in Hot Mix plant 40-60 TPH with F.E. loader, laying with paver finisher, transporting the mixed material by tipper and rolling with power roller 8-10 tonne, to achive desired density approved by the department, but excluding cost ot tack coat with all lead & lift[ Morth Speficiation : Clause 508] , Type "B" (19 kg binder per 10 Sqm ) bitume VG 30 grade |
| 17 | Supplying and installation of delineators (road way indicators, hazard markers, object markers), 80-100 cm high above ground level, painted black and white in 15 cm wide strips, fitted with 80 x 100 mm rectangular or 75 mm dia circular reflectorised panels at the top, buried or pressed into the ground and conforming toIRC-79 and the drawings. |
| 18 | Providing & Fixing of median marker made of tough high impact resistance injection moulded thermo plastic body with an isosceles trapezoidal structure of length, height & width not less than 12cm, 10cm & 10cm respectively and thickness not less than 1.8mm. The median marker shall have flourescent yellow colour retro reflective sheeting of size not less than 8.5cm X 8.5cm and with fully reflective micro prismatic as its retro reflective elements and meet ASTM D4956-09 Type XI specification. The retro reflective sheeting shall be on both the sides of the median marker and shall be as protected with no exposed edges that prevent edge lifting, vadalism, sheeting damage etc. The median marker shall be fixed with a combination of epoxy adesive and grouting etc. complete as directed by the Engineer - In - Charge. The contractor shall submit 2 years pre qualified warranty certificate from the manufacturer for satisfactory field performance during the time of bid submission |
| 19 | Supply of Swiss type Bollard out of 1.25mm thick MS sheet total height 135cm the lower portion is made in tapered circular section having upper dia 15cm and lower dia 20cm with attachment of one mandatory plate 7 mm thick & fixed with the help of 7cm long 30mm dia crome plated MS tube this part is fixed on the body with another attachment of a cap 30×7 cm whole body is processed in black stoving enamel and mandatory plate in Azure blue with one compulsory keep left arrow with 10mm border reflective strip each of 7.5 cm on body complete in all respect. |
| 20 | Supply of retro-reflective name board size 600×900mm made out of 2mm thick aluminium sheet fixed on post and frame made out or angle iron 50×50×6mm 3m long using stainless steel nut bolts of 8mm dia aluminium sheet is covered with high intensity grade Retro-reflective letters in black post duly painted in black and white synthetic enamel, complete in all respect confirming to MoRTH specifications (2001) cl. 801. |
| 21 | Supply & Fixing of PVC Speed Breaker of Size 350 x 250 x 50mm in Black/Yello colour with corrugated design on it, make Road Star GP 1005/Dark Eye DA1005 or equivalent, including fixing base on road with cement, grit, sand, epoxy and with four nails at corners complete in all respect. |
| 22 | Providing, laying and spreading of granular sub-base by providing close graded Material, mixing in a mechanical mix plant at OMC carriage of mixed Material to work site, spreading in uniform layers with motor grader on prepared surface and compacting with vibratory power roller to achieve the desired density, complete as per clause 401. Plant Mix Method , Grading-III |
| 23 | Construction of embankment with approved Material obtained from borrow-pits with all lifts and leads, transporting to site, spreading, grading to required slope and compacting by vibratory roller 8-10 tonne to meet requirement of Table 300-2 including cost of compensation for earth taken from private land with lead upto 1 km as per MoRTH Specification : Clause No. 305. |
| 24 | M-40,80mm thick to be used in medium-traffic (Medium trafficis defind as a daily traffic of 150-450 commercial vehicles exceeding 30 KN laden weight , or an equivalent of 0.5 to 2.0 MSA for a design life of 20years) like city streets, small and medium market roads, low volume roads ,ytility cuts on arterial roads, etc. : Category "B"denated only two side like I,Z,T shape etc. as per IRC SP 63:2004 |
| 25 | Dismantling of cement concrete pavement by mechanical means using pneumatic tools, breaking to pieces not exceeding 0.02 cum in volume and stock pilling at designated locations and disposal of dismantled Materials upto a lead of 1000 mtrs. stacking serviceable and unserviceable Materials separately.(MoRTH specification : Clause 202) |
| 26 | Providing and laying in position cement concrete including curing, compaction etc. complete in specified grade excluding the cost of centering and shuttering - All work up to plinth level.M20 grade Nominal Mix 1: 1.5: 3 (1 cement : 1.5 coarse sand : 3 graded stoneaggregate 20mm nominal size). |
| 27 | Providing and laying in position cement concrete including curing, compaction etc. complete in specified grade excluding the cost of centering and shuttering - All work up to plinth level. M10 grade Nominal Mix 1: 3: 6 (1 cement : 3 coarse sand : 6 graded stoneaggregate 20mm nominal size). |
| 28 | Providing and fixing steel gate, grating , and grills made of angles, tees, square bars, flats,or black pipe with holdfast and fittings complete as per design and drawing including cutting welding and fabrication with priming coat of red oxide |
| 29 | Extra if square,rectangular hollow tubelarsections are used or grill made by flats only |
| 30 | Providing corrugated G.S. sheet roofing including vertical / curved surface fixed with polymer coated J or L hooks, bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead and including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (upto any pitch in horizontal/ vertical or curved surfaces)excluding the cost of purlins, rafters and trusses and including cutting to size and shape whenever required. 0.63 mm thick with zinc coating not less than 275 gm/m2 |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
