Military Engineer Services-MES has published Tender For Special Repair To Building No T-13 (Ta/Svy Line) And Special Repair/Replacement To Building No T-05 (Office Complex) In The Aor Of Age B/R-1 Under Ge Khumbathang. Submission Date for this Tender is 07-05-2024. Building Work Tenders in Khumbathang Jammu And Kashmir. Bidders can get complete Tender details and download the document.
| FileName | File Description | File Size |
| e99c6367-de9d-47da-8e79-543d7f313b5e.html | Tender Notice | 0 KB |
| BOQ_728015.xls | Tender Document | 0 KB |
| Tender45.pdf | Tender Document | 0 KB |
| Tendernotice_1.pdf | Tender Document | 0 KB |
| Sl. No. | Item Description |
| 1 | Dismantling, wall and ceiling boards (fibre, pulp, insulation, etc) or insulation boards/ slabs/ blankets, any thickness, includingcover fillets complete all as specified and directed by Eng-in-Charge |
| 2 | Dismantling timber in fillets, rails, posts, rafters, purlins etc under 40 Sq cm in section in any position unframed work complete all as specified and directed by Eng-in-Charge |
| 3 | Dismantling of Plain or corrugated steel sheeting,any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified and directed by Eng-in-Charge |
| 4 | Dismantling Dismantling wrought iron or mild steel work of any description complete all as specified and directed by Eng-in-Charge |
| 5 | Dismantling floor, hearth or wall tiling including cement mortar bedding(but not backing) and rubbish off the premises complete all as specified and directed by Eng-in-Charge |
| 6 | Demolition of cement concrete in ground floors and paving n exc 15 cm thickness (below or above ground level) complete all as specified and directed by Eng-in-Charge |
| 7 | M & L 40 mm thick cement concrete type B-0, 1:2:4(12.5mm graded crushed stone aggregate) as in sub base to floor complete all as specified and directed by Eng-in-Charge |
| 8 | M&L for Joist, channel, angle, or tee sections,Fe-410-W(GdeE-250 )quality fixed independently, with or without connecting plates,in roof,wall etc complete all as specified and directed by Eng-in-Charge |
| 9 | M&L second class soft wood, plain fillets, square or rectangular in section of area exc 13 and n exc 25 Sqcm, clean sawn, secured with nailsor brads complete all as specified and directed by Eng-in-Charge |
| 10 | M&L second class soft wood, plain fillets, square or rectangular in section of area exc 6 and n exc 13 Sqcm, clean sawn, secured with nailsor brads complete all as specified and directed by Eng-in-Charge |
| 11 | M&L second class soft wood, plain fillets, square or rectangular in section of area n exc 3 Sqcm, clean sawn, secured with nailsor brads complete all as specified and directed by Eng-in-Charge |
| 12 | M&L 9 mm thick, prelaminated particle board, interior grade, prelaminatedone side with decorative choice lamination and other side balancing white lamination, fixed with screws to timber frame work as in ceiling complete all as specified and directed by Eng-in-Charge |
| 13 | M&L 12 mm thick, prelaminated particle board, interior grade, prelaminatedone side with decorative choice lamination and other side balancing white lamination, fixed with screws to timber frame work as in walls.complete all as specified and directed by Eng-in-Charge |
| 14 | Material and labour non skid colour ceramic tiles of 7 to 8 mm thick (square/rectangular) area pf each the exceeding0.11 sqm but not exceeding0.18 sqm of approved 1st qualityin floors including 15mm thick screed bed in cement mortar 1:6 set and jointed in neat cement slurry and pointed with white / coloured cement to match coloured tiles complete all as specified and directed by Eng-in-Charge |
| 15 | Taking down chowkats or frame with shutters ( without taking off shutter from frame ) n exc 1.50 Sqm each complete all as specified and directed by Eng-in-Charge |
| 16 | Taking down shutters exc 1.0 Sqm and not exc 2 sqm each complete all as specified and as directed by the Engineer-in-Charge |
| 17 | Supply and fixing of pressed steel windows (hollow section) with side hung shutters including projecting type hinges with steel handle,and steel peg stay and 02 Nos tower bolt in each leaf complete with glazing bars dovetailed or welded complete all as specified and as directed by the Engineer-in-Charge |
| 18 | Taking down chowkats or frame with shutters ( without taking off shutter from frame ) 1.50Sqm and n exc 4.0 Sqm each complete all as specified and as directed by the Engineer-in-Charge |
| 19 | Supply and fixing of40mm thick flush shutters,solid core construction and both faces covered with decorative veneer wirh lipping/frame to match complete all as specified and as directed by the Engineer-in-Charge |
| 20 | Resecuring or easing shutters exc 1 Sqm and n exc 2 Sqm and adjusting with or without taking down and in the same opening complete all as specified and directed. |
| 21 | Supply and fixing in repair stainless steel wire cloth, 0.36 mm nominal dia of wire and average with of aperture 1.4 0 mm and fixed with stainless steel wire staples on steel/wooden surface complete all as specified anddirected by the Engineer-in-Charge. |
| 22 | Hacking out old broken glass (any thickness, size, quality) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads complete all as specified and directed by Eng-in-Charge |
| 23 | Supply and fixing of 4 mm thick sheet glass ordinary quality and glazing with oil putty in sqm n exc 0.5 sqm in each pane (including rubber packing wherever required) complete all as specified and directed by Eng-in-Charge |
| 24 | M & L for Plain, Solid, Straight Chowkhats and frames wrought framed rebated on the solid rounded or chamfered put together with glue pinned at joints supplied and fixed 2nd class hard wood complete all as specified and directed by Eng-in-Charge |
| 25 | Supply and fixing of Plain framed panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12mm vaneered particle board with commercial vaneering on both faces.The size of rail and stile as per IS: 1003 (Part I) kiln seasoned and chemically pressure treated 35 mm thickness of shutter (2nd class HW rail and style) complete all as specified and directed by Eng-in-Charge. |
| 26 | Supply and fixing of Mild steel barrel tower bolts,stove enamelled black with bright bolt and fixed (150mm length of bolt) complete all as specified and directed by Eng-in-Charge |
| 27 | Supply and fixing of Mild steel sliding door bolts,plate type,stove enamelled black with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts four on bolt plate and two on staple plate and fixed (250mm length of bolt) complete all as specified and directed by Eng-in-Charge |
| 28 | Supply and fixing of butt hinges heavy weight cold rolled mild steel and fixed (100mm) complete all as specified and directed by Eng-in-Charge. |
| 29 | Supply and fixing of butt hinges heavy weight cold rolled mild steel and fixed (75mm) complete all as specified and directed by Eng-in-Charge |
| 30 | Supply and fixing of mild steel handles, (150mm) complete all as specified and directed by Eng-in-Charge |
| 31 | Supply and fixing for Pre- painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering /cladding to wall, fixed with self tapping screws complete all as specified. |
| 32 | Supply and fixing for Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws as complete all as specified and directed by Eng-in-Charge |
| 33 | Preparation new or previously untreated wood surfaces over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed by Eng-in-Charge |
| 34 | Preparation of old painted steel and iron surfaces of any description over 10 cm width or girth not otherwise described and applying one coat of synthetic enamel paint completeall asspecified & directed by the Engr-in-Charge. |
| 35 | Preparation of new or previously untreatediron surfaces of any description over 10 cm width or girth not otherwise described and applying one coat of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed by Eng-in-Charge. |
| 36 | Taking up or down steel tubing and connections 15mm bore of pipe, including cleaning for refixing or removal to storecomplete all as specified and as directed by the Engineer-in-Charge. |
| 37 | Taking up or down steel tubing and connections 20mm bore of pipe, including cleaning for refixing or removal to storecomplete all as specified and as directed by the Engineer-in-Charge. |
| 38 | Supply and fixing of steel water tubing 15 mm bore medium grade galvanized with all fittings such as bends, tees, nipples, elbows, reducers, etc, fixed complete to walls and ceilings or laid in floors complete all as specified and directed by Eng-in-Charge. |
| 39 | All as per item No 38.00 above but 20 mm bore dia complete all as specified and directed by Eng-in-Charge |
| 40 | Supply and fixing of 500 Ltr capacity Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position including dismantling existing water tanks and removing to store complete all as specified and directed by Eng-in-Charge. |
| 41 | Supply and fixing in repair vitreous china ware wash hand basin 550mmx 400 mm size flat back or angle including new bracket and making good all connections in repairs complete all as directed by the Engr-in-Charge. |
| 42 | Supply and fixing of 32mm Dia PVC waste pipe for sinks or wash basines etc, in repairs complete all as specified and directed by Eng-in-Charge. |
| 43 | Supply and fixing of 32 mm dia bore waste fittings brass chromium plated fixed to wash hand basin/urinals with long screwed shanks and fly nuts flange and bedded in run lead cement and other end fixedin repairs complete all as specified and directed by Eng-in-Charge. |
| 44 | Supply and fixing in repair 15 mm bore piller cocks fancy type,cast copper alloy,with capstan heads,chromium plated,screwed down, fancy type high pressure, with or without lettred "HOT or COLD" with long screwed sunk and fly nuts complete all as specified and directed by Eng-in-Charge |
| 45 | Supply and fixing in repair Bib taps, cast copper alloy, chromium plated, fancy type with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule 15mm dia and fixed complete all as specified and directed by Eng-in-Charge |
| 46 | Supply and fixing of 15mm bore angle valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed in repair complete all as specified and directed by Eng-in-Charge |
| 47 | Supply and fixing of PVC connection 15 mm bore LDPE pipe 45cm long withbrass nuts and washers on both ends all as in repairs complete all as specified and directed by Eng-in-Charge. |
| 48 | Supply and fixing in repair 600mmx450mm bevelled edge mirror of selected quality glass, and fixed to wall withchromium plated screw studscomplete all as specified and directed by Eng-in-Charge. |
| 49 | Supply and fixing inrepair 25 mm dia stainless steel curtain rods including end cap/ brackets,stops,rollers latest design etc and taking down old pipe complete all as specified and as directed by the Engineer-in-Charge. |
| 50 | Supply and fixing in repair Vitreous China squatting pan of pattern “Orissa pattern”, size 580x440 mm white with ‘P’ or ‘S” trap, front or back inlet and foot rests, any pattern n including connection to trap,and to flushing pipe, anti-syphonage pipe,etc. including making good to floor (excluding flushing cistern and flush pipe) complete all as specified and directed by Eng-in-Charge. |
| 51 | Supply and fixing inrepair 10 Litre capacity PVC low level flushing cistern with ball valve and handle/push button 32mm dia PVC flush pipe including taking down unserviceablecistern complete all as specified and directed by Eng-in-Charge. |
| 52 | Supply and fixing of towel Rail 600mm long 20mm dia,D type cromium plated, fixed with and including Chromium plated brass screws andwooden/plastic cleats and fixed in repairscomplete all as specified and directed by Eng-in-Charge. |
| 53 | Supply and fixing of sheet glass shelf assembly consisting of 5.5 mm thick sheet galss shelf 12 cm wide with chromium plated bracket guard and railing 60 cm long complete all as specified and directed by Eng-in-Charge. |
| 54 | Supply and fixing of 75 mm dia PVC (SWR) floor trap plain with grating doom with or without hole as directed including jointing to waste pipe fixed in solvent cement or cement concrete 1:2:4 type B-1 complete all as specified and directed by Eng-in-Charge. |
| 55 | Demolition/Dismantling of drain pipes any type at any position complete all as specified and directed by Eng-in-Charge. |
| 56 | Supply and fixing of 75mm bore PVC(SWR) Pipes single socketed in any length with rubber ring joints laid in trenches or in floor complete all as specified and directed by Eng-in-Charge. |
| 57 | Supply and fixing of 110mm bore PVC(SWR) Pipes sinle socketed in any length with rubber ring joints laid in trenches or in floor complete all as specified and directed by Eng-in-Charge. |
| 58 | Supply and fixing of 75mm bore PVC(SWR) bend complete all as specified and directed by Eng-in-Charge. |
| 59 | Supply and fixing of 110mm bore PVC(SWR) bend complete all as specified and directed by Eng-in-Charge. |
| 60 | Demolition of Concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed by Eng-in-Charge. |
| 61 | M&L for PCC 40mm thick type B-1, 1:2:4 (20mm graded crushed stone aggregate) as in PCC padding for tiles complete all as specified and directed by Eng-in-Charge. |
| 62 | M&L for Vitrified Ceramic tiles 7 to 8 mm thick (square/ rectangular) polished double charged, area of each tiles exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the existing surface laid over 15 mm thick avg screed bed in cement mortar 1:6 complete all as specified and directed by Eng-in-Charge. |
| 63 | M&L for wooden floor tiles of size 1200 x 200 mm and 7 mm thick with dove tailed joints laid over 150 Micron polythene film and 3mm thick foam as per manufacturers instructions including taking down of old wooden flooring and fixed with decorative wooden beadings as per site requirement complete all as specified and directed by Engr-in-charge. |
| 64 | Supply and fixing of second class soft wood of Glazed and skeleton shutters thickness 30mm, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edge of framing plain, chamfered or rounded, fitted with cut and mitred beds for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8. clause 8.20 (a); supplied and fitted to chowkats complete all as specified and directed by Eng-in-Charge. |
| 65 | Supply and fixing of hold fasts flats iron Fe-290 Gde-E-165 complete all as specified and directed by Eng-in-Charge. |
| 66 | M&L for Cement concrete Nominal Mix Type B-0, 1:2:4 (12.5 mm graded stone aggregates)as in beams cantilever bressumer lintles over 1.5 m span complete all as specified and directed by Eng-in-Charge. |
| 67 | Supply and fixing of 75 mm size mild steel butt hinges, medium weight cold rolled (including fixing with nails/screws or welded as required) complete all as specified and directed by Eng-in-Charge. |
| 68 | Supply and fixing of 100 mm size mild steel butt hinges, medium weight cold rolled (including fixing with nails/screws or welded as required) complete all as specified and directed by Eng-in-Charge. |
| 69 | Supply and fixing of 100 mm MS barreltower bolt stove enamelled black, with bright bolt and fixed complete all as specified and directed by Eng-in-Charge. |
| 70 | Supply and fixing for 100mm sizeMS pressed handles, oval type, stove enamelled blackcomplete all as specified and directed by Eng-in-Charge. |
| 71 | Supply and fixingfor 150mm sizeAluminium handles, cast type, anodised complete all as specified and directed by Eng-in-Charge. |
| 72 | Supply and fixing of Harrison rails, stainless steel 25 mm dia with fixing bracket, stops, rollers including side funnel/cup decorative type etc. complete all as specified and directed by Eng-in-Charge. |
| 73 | Demolition of Brickwork or stone/boulder masonry, laid in CM for ashlars facings, dressed stonework, precast concrete articles and precast concrete block walling complete all as specified and directed by Eng-in-Charge. |
| 74 | M&L for precast cement concrete block masonry with solid block exc 10 cms in width made with PCC 1:3:6 type C-1 (using 20 mm graded crushed stone aggregate) and set in cement mortar 1:6 complete all as specified and directed by Eng-in-Charge. |
| 75 | M&L 12 mm thick rendering on fair faces of brick work or concrete surface in cement mortar1:6 to be finished even and smooth withoutusing extra cement complete all as specified and directed by Eng-in-Charge. |
| 76 | M&L 15 mm thick cement plaster in cement mortar 1:4 on brick work or concrete surface other than fair face or brick work and finished surface even and smooth without using extra cement complete all as specified and directed by Eng-in-Charge. |
| 77 | M&L for PCC 75 mm thick type B-1, 1:2:4 (20mm graded crushed stone aggregate) as in Plinth protection complete all as specified and directed by Eng-in-Charge. |
| 78 | Preparation of newly plastered surfaces of walls including cornices, pillasters etc, and applying two coats of distamper over a coat of primer complete all as specified and directed by Eng-in-Charge. |
| 79 | Preparation of new plastered surfaces of walls including cornices, pillasters etc, and applying two coats of cement base paint over a coat of white wash complete all as specified and directed by Eng-in-Charge. |
| 80 | Supply and fixing of Anodised aluminium framefor doors, windows, ventilators and aluminium partition with one or more rebates including joining cleat for fixing etc. complete all as specified and directed by Eng-in-Charge. |
| 81 | Supply and fixing of Roof trusses (framed), trussed purlins crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle channel or flat sections) including distance pieces, cleats etc. complete all as specified and directed by Eng-in-Charge. |
| 82 | Demolition of reinforced Concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed by Eng-in-Charge. |
| 83 | M&L for RCC Nominal Mix Type B-1,1:2:4 ( 20 mm graded crushed stone aggregates)as in beams cantilever bressumer lintles over 1.5 m span complete all as specified and directed by Eng-in-Charge. |
| 84 | Formwork (rough finished ) to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter complete all as specified and directed by Eng-in-Charge. |
| 85 | M&L mild steel TMT bars 10 mm dia and over cut to length bent to shape required including cranking bending spirally for hooping ends and binding with and including mild steel wire ( annealed ) not less than 0.90 mm dia or securing with clips complete all as specified and directed by Eng-in-Charge. |
| 86 | All as per Item No 87.00 above but 5 mm dia and over upto and including 10 mm dia in stirrups complete all as specified and directed by Eng-in-Charge. |
| 87 | M & L second class hardwood, Plain fillets, square, rectangular in section of area exc 3 and n exe 6 sqcm, clean sawn, secured with mills or brads complete all as specified and directed by Eng-in-Charge. |
| 88 | Taking down carefully copper/ aluminium point wiring (light, fan, buzzer, socketor power) complete including fixture and fittings such as switches, ceilling roses, pendants , regulators, sockets light fitting etc for taking credit removing from site and making good disturbed surface etc complete all as specified and directed by Eng-in-Charge. |
| 89 | Material and labourfor point wiring with 1.5 sqmm cable FRLSPVC insulated, unsheathed copper multistranded conductor, 1100 V grade of size 1.5sqmm including necessary termination board 1.5 Sqmm PVC insulated unsheathed FRLScopper conductor as earthingand connected to common earthing with PVCheavy duty casing caping/PVC conduit ISI marked as rquired at site along with all accessories and making good the disturbed surfaces of wall/ ceiling etcfor the following item no 91.01 and 91.02 complete all as specified and directed by Eng-in-Charge : - |
| 90 | One light point/ one fan point/ Bell Point controlled by one switch complete all as specified and directed by Eng-in-Charge. |
| 91 | One 3 pin socket outlet, 5 Amp independent complete all as specified and directed by Eng-in-Charge. |
| 92 | Supply and fixing in repair switch piano flush type single pole one way6 Amps complete all as specified and directed by Eng-in-Charge. |
| 93 | Supply and fixing in repair socket 6 amp complete all as specified and directed by Eng-in-Charge. |
| 94 | Supply only holder any type for batten fitting complete all as specified and directed by Eng-in-Charge. |
| 95 | Supply and fixing in repairCeiling rose3 plates flush type 6 Amps,250 volts ACISI marked complete all as specified and directed by Eng-in-Charge. |
| 96 | All as per item No 91.00 here-in-before above butfor point wiring for power point with 2.5 Sqmm FRLS PVC insulated unsheathed copper cable 1100 Volt grade drawn through and including PVC casing caping heavy dutyISI marked /heavy duty conduitISI marked as required at site alongwith accessories with 2.5 Sq mmFRLS PVC insulated unsheathed copper conductor cable as earthing and connected to common earth complete all as specified and directed by Eng-in-Charge. |
| 97 | Supply and fixing in repair switch socket combination switch socket outlet 3 pin, 16 amp flush type complete all as specified and directed by Eng-in-Charge |
| 98 | Supply and fixing in repair wall mounted LED light fitting 1x20 watts AC decorative box type with driver holder including LED tube light , energy ef?cient type 4 feet long including neccessary conection prewired and making connection with 3 core copper flexible cable of appropriate size from ceilling rose complete all as specified and directed by Eng-in-Charge. |
| 99 | Supply and fixing in repair sheet metal enclosure SPN DB 02 way,single phase 240 volts double door with 200 amp rated bus bar complete all as specified and directed by Eng-in-Charge. |
| 100 | Supply and fixing in repair sheet metal enclosure SPN DB 08 way,single phase 240 volts double door with 200 amp rated bus bar complete all as specified and directed by Eng-in-Charge. |
| 101 | Supply and fixing in repairfor Circuit breaker single pole, 6 to 32 Amp 240 volt C curve 10 KA, IP 20including taking down old one complete all as specified and directed by Eng-in-Charge. |
| 102 | M&L in repairfor Circuit breaker single pole & neutral240 volt C curve 10 KA 32/40 Amps capacity IP 20including taking down old one complete all as specified and directed by Eng-in-Charge. |
| 103 | Supply and fixing of LED security light fitting 33/45 watts 230 volts AC outdoor type with high pressure die cast aluminium housing and heat resistant complete with driver,lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete all as specified and directed by Eng-in-Charge. |
| 104 | Supply and fixing in repair of exhaust fan , steel body AC single phase 230 volt of size 250/300 mm sweep mettalic body with blades and frame and louvers complete all as specified and directed by Eng-in-Charge |
| 105 | Supply and fixing in repairtwo single core 6 sq mm for sub Main wiring with copper conductor multistranded PVC insulated and unsheathed 1100 Volts grade in and including PVC casing capping with fixing accessories including one run of 6 Sq mm copper conductor complete all as specified and directed by Eng-in-Charge. (Note: - Two runs of 06 Sq mm cable, one run of 6 Sq mm earth cable and one run of PVC casing Capping shall be measured as one running meter.) |
| 106 | Supply, laying and testing cable XLPE insulated, screened, PVC bedded, galvanised steel strip or wire armoured, electric power cables (heavy duty) 1100 volts grade with stranded aluminium conductor of size 10 sqmm 2 core. complete all as specified and directed by Eng-in-Charge |
| 107 | Material and labour earthing complete with galvanized steel earth plate 60 cm x 60cm x 6.0mm thick buried directly in ground vertically to a depth not less than2.25 mtr below ground level with top edge of the earth plate at a depth not less less than 1.5 mtr filled aroundwith 15 cm thick alternate layers of charcoal dust and salt and connected to earth leadwire 4mm dia (8 SWG) by means of bolt, nut and check nutsand washers of galvanized iron or steel and thimble and other ends of the earth wire connected to main switch board and protected by galvanized iron pipe light grade 15mm bore and watering pipe 20mm dia light grade with funnel and wiremesh, pcc 1:3:6 type C-1 in chambers RCC 1:2:4 type B-1 in pit cover reinforced with 8 mm dia deformed bars 15cm center to center both ways all as directed by Engr-In-Charge, complete all as shown in electric plate No 3 of MES SSR Part I |
| 108 | Supply and fixing of LED luminaire 600mmx600mm 35/36 watt 220 volts AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver , holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cable of suitable size complete all as specified and directed by Eng-in-Charge. |
| 109 | Supply and fixing in repair wall mounted LED light fitting 1x20 watts AC decorative box type with driver holder including LED tube light , energy ef?cient type 4 feet long including neccessary conection prewired and making connection with 3 core copper flexible cable of appropriate size from ceilling rose complete all as specified and directed by Eng-in-Charge |
| 110 | Deduct Credit for Demolished/Dismantled material Rs (-) 45,489.00 (Minus) as listed in Schedule "A" Part-II (Credit Schedule) Note :Tenderers will not quote against this item being a tentative amount, to be considered to arrive at the "Contract Sum". |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
